Skip to main content
Elsevier

Books in Energy and power

Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.

  • Uranium and Nuclear Energy: 1981

    Proceedings of the Sixth International Symposium Held by the Uranium Institute, London, 2 – 4 September, 1981
    • 1st Edition
    • Sam Stuart
    • English
    Uranium and Nuclear Energy: 1981 is a collection of 27 papers presented at the Sixth International Symposium on Uranium and Nuclear Energy, held by The Uranium Institute, London on September 2-4, 1981. This six-part volume represents a true cross-section of world opinion on nuclear matters. After briefly discussing the leading problems linked to world’s energy and ideas concerning possible solutions, this book goes on presenting the Uranium Institute analysis on uranium supply and demand, the growth in stockpiles of natural and enriched uranium, and the effect of these stockpiles on the market for natural uranium. Part III examines the principles and applicability of the geological, geophysical, and geochemical uranium exploration techniques, while Part IV highlights the possibility of utilizing nuclear energy in a number of countries, with a particular emphasis on the involvement of public and the organizations in nuclear plant construction for project implementation. Part V considers the controversy in supply assurances in the nuclear field and the prospects of reaching new international consensus concerning uranium utilization. Part VI deals with the growing maturity of the nuclear industry, the nature of the world’s energy crisis, and the plight of the developing countries in nuclear energy. This book will be of value to nuclear energy researchers and economists.

  • Reactor Safeguards

    • 1st Edition
    • Charles R. Russell
    • J. V. Dunworth
    • English
    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactors, the dispersion of radioactive material, and requirements for reactor sites. The final chapter focuses on operating experience with nuclear reactors. It presents a of history of reactor incidents which are useful to study since much of the knowledge of reactor safety has come from the conscientious reporting of the details and circumstances of failure.

  • Ecology and Coal Resource Development

    Based on the International Congress for Energy and the Ecosystem Held at the University of North Dakota, Grand Forks, North Dakota, 12-16 June 1978
    • 1st Edition
    • Mohan K. Wali
    • English

  • Methods and Models for Assessing Energy Resources

    First IIASA Conference on Energy Resources, May 20-21, 1975
    • 1st Edition
    • Michel Grenon
    • English
    Methods and Models for Assessing Energy Resources covers the proceedings of the First IIASA Conference on Energy Resources, held on May 20-21, 1975. This book mainly focuses on energy resources, such as coal, oil and natural gas, and uranium resources, and the assessment of these resources. This text first discusses general activities and classification of energy resources, including the institutions involved, problems faced, and opportunities. This book then explains the methods for assessing petroleum resources. This text devotes two parts, each explaining two energy resources—coal and uranium. This book concludes by explaining the need to further the research and study of this subject. This publication will be invaluable to students and experts in the field of chemistry, particularly engaged in the study of energy resources. Sectors and industries mainly dependent on energy resources will also find this book of significance.

  • Elements of Energy Conversion

    • 1st Edition
    • Charles R. Russell
    • English
    Elements of Energy Conversion brings together scattered information on the subject of energy conversion and presents it in terms of the fundamental thermodynamics that apply to energy conversion by any process. Emphasis is given to the development of the theory of heat engines because these are and will remain most important power sources. Descriptive material is then presented to provide elementary information on all important energy conversion devices. The book contains 10 chapters and opens with a discussion of forms of energy, energy sources and storage, and energy conversion. This is followed by separate chapters on thermal properties and relations, heat engines, chemical energy, electrochemical processes, and solar energy. Subsequent chapters deal with thermoelectricity, thermionic generators, radioisotope power sources, and energy storage.

  • Energie

    Economie et Prospective
    • 1st Edition
    • André Gardel
    • English

  • Solar Versus Nuclear

    Choosing Energy Futures
    • 1st Edition
    • Mans Lönnroth + 2 more
    • English
    Solar Versus Nuclear: Choosing Energy Futures study is an eight-chapter text that studies the long-term implications of Sweden's decisions to explore nuclear energy and other alternative development options. Sweden's high standards of living, energy intensive industries, advanced technology in many fields, strong tradition of electrification and a competent utility organization, abundant reserves of (admittedly low grade) uranium, low population density and a large number of suitable reactor sites, make nuclear energy seemed ideal. Chapter I deals with some different ways of describing and viewing energy, while Chapter 2 analyzes the earlier changes of energy sources in an attempt to describe the relations between the development of society and energy consumption. Chapter 3 is concerned with the durability and other essential characteristics of these energy sources. Chapter 4 discusses two distinct developments, one leads to a Nuclear Sweden with its energy supply based chiefly on uranium and the other to a Solar Sweden based on renewable energy sources. This chapter compares the characteristics and costs of the two alternatives and discusses the possibilities of combining them. Chapter 5 covers the possible developmental tendencies built into the present energy policy, and Chapter 6 looks into the proposals for a conceivable transitional solution for the 1980's, which could reduce the dependence on oil while preserving both the solar and nuclear option as possible alternatives. Chapter 7 discusses the organizational changes in energy conservation and energy production. Lastly, Chapter 8 considers some questions regarding the effect of the energy systems on the long-term development of society.

  • New Sources of Oil and Gas

    Gases from Coal; Liquid Fuels from Coal, Shale, Tar Sands, and Heavy Oil Sources
    • 1st Edition
    • S. S. Penner + 2 more
    • English
    New Sources of Oil & Gas: Gases from Coal, Liquid Fuels from Coal, Shale Tar Sands, and Heavy Oil Sources is a collection of papers that covers various concerns in exploiting alternative sources of oil and gas. The book first covers the essential features of developing coal-gasification and coal-liquefaction technologies, and then proceeds to discussing the results of a detailed evaluation of technologies for shale-oil recovery. The last article discusses the assessment of research areas that affect the prospects for oil recovery from oil sources and tar sands. The book will be of great use to researchers and practitioners of disciplines involved in the fuel industry.

  • Integrated Rural Energy Planning

    • 1st Edition
    • Yehia Elmahgary + 1 more
    • English
    Integrated Rural Energy Planning presents a series of case studies and guidelines for developing integrated rural energy centers, particularly in the Third World. This text highlights technical cooperation and information flow between developing countries. This book consists of 11 chapters and begins with a brief overview of the impact of rural development and rural energy sources on the environment, along with the needs of and strategies for integrated rural development. The chapters that follow describe integrated rural energy systems in selected countries, such as Sri Lanka, India, Indonesia, Philippines, China, Nigeria, and Colombia. The experimental rural energy center established in Niaga Wolof, Senegal and the integrated field project in Basaisa village, Egypt are also discussed. The final chapter offers guidelines for planning, development, and operation of integrated rural energy projects. This monograph will appeal to energy specialists, policymakers, and others who are interested in constructing, operating, and maintaining integrated rural energy centers in developing countries.

  • Energy for Rural and Island Communities III

    Proceedings of the Third International Conference Held at Inverness, Scotland, September 1983
    • 1st Edition
    • John Twidell + 2 more
    • English
    Energy for Rural and Island Communities III contains the proceedings of the Third International Conference held at Inverness, Scotland, in September 1983. The book is organized into 10 parts, separating the same number of topics in the field of energy for rural and island communities, particularly, energy and development; wind energy; photovoltaic systems; and solar energy. The text also covers wave energy, hydro power, biofuels, and geothermal energy. Energy in transport sector and the Energy Act Workshop are also described.

  • European Contract Electronics Assembly Industry - 1993-97

    A Strategic Study of the European CEM Industry
    • 1st Edition
    • Eric Harkness
    • English
    Please note this is a Short Discount publication.This report examines the emerging and rapidly growing contract electronic manufacturing industry in Europe [which provides the service of assembling electronic components onto printed circuit boards including design and test] – from the point of view of both the Original Equipment Manufacturer and the Contract Electronics Manufacturer. The regional structure of both OEM & CEM industries is defined, highlighting the wide variation of contract assembly activity from country to country. Detailed profiles are provided on the 56 major CEMs in Europe both in terms of business performance and capabilities. An exhaustive investigation is conducted into the strategic issues surrounding the OEM's "make or buy" decision, taking account of both commercial and technological conservations. Market data and forecasts are provided, showing contract assembly industry growth by country and by end–use. The report is completed by a directory listing of over 200 European Contract Assembly Companies.

  • An Efficient Energy Future

    Prospects for Europe and North America
    • 1st Edition
    • Sam Stuart
    • English
    An Efficient Energy Future: Prospects for Europe and North America is a two-part book exploring the energy problems and policies for Europe and North America. The first part deals with energy demand problems and policies of the countries; two possible energy futures based on the scenarios of the MEDEE model; and energy demand projections for specific sectors: buildings, transport, and industry. The second part presents a collection of relevant energy demand indicators for the housing, transport, and industry sectors for all 17 covered countries.

  • Nuclear Power Generation

    Incorporating Modern Power System Practice
    • 3rd Edition
    • Volume J
    • P.B. Myerscough
    • English
    Nuclear power generation has undergone major expansion and developments in recent years; this third edition contains much revised material in presenting the state-of-the-art of nuclear power station designs currently in operation throughout the world. The volume covers nuclear physics and basic technology, nuclear station design, nuclear station operation, and nuclear safety. Each chapter is independent but with the necessary technical overlap to provide a complete work on the safe and economic design and operation of nuclear power stations.

  • Station Planning and Design

    Incorporating Modern Power System Practice
    • 3rd Edition
    • Volume A
    • P.C. Martin
    • English
    The planning and design of new power stations can involve complex interaction between the many engineering disciplines involved as well as environmental, planning, economical, political and social pressures. This volume aims to provide a logical review of the procedures involved in power station development. The engineering aspects are outlined in detail, with examples, showing the basis of the relationships involved together with "non-engineering" factors so that the engineer can draw on the information provided for specific projects. The civil engineering and building of power stations are also treated, from the earliest planning and site selection studies, through estimating, finance and quantity surveying, to final landscaping.

  • Turbines, Generators and Associated Plant

    Incorporating Modern Power System Practice
    • 3rd Edition
    • Volume C
    • D.J. Littler
    • English
    The introduction of new 500 MW and 660 MW turbine generator plant in nuclear, coal- and oil-fired power stations has been partly responsible for the increase in generating capacity of the CEGB over the last 30 years. This volume provides a detailed account of experience gained in the development, design, manufacture, operation and testing of large turbine-generators in the last 20 years. With the advance in analytical and computational techniques, the application of this experience to future design and operation of large turbine-generator plant will be of great value to engineers in the industry.

  • Modern Power Station Practice

    Incorporating Modern Power System Practice
    • 3rd Edition
    • Volume M
    • P.M. Reynolds
    • English
    This volume contains two additional features which enhance the value of Modern Power Station Practice as a whole: a cumulative subject index and a detailed list of tables of contents for the entire work. The cumulative index provides access to the vast body of information presented in the set, and also indicates at a glance the breadth and depth of the treatment through the use of inclusive page ranges for major topics. In order to allow the reader the greatest flexibility in using the index there are many cross-references. The entries themselves are qualified by up to two descriptive subheadings to allow the most detailed coverage possible of the subject matter. The reproduction of the tables of contents for each volume also provides an overview of the organisation of the individual volumes.

  • Nuclear or Not?

    Choices for Our Energy Future
    • 1st Edition
    • Gerald Foley + 1 more
    • English
    Nuclear or Not? Choice for Our Energy Future documents the proceedings of a Royal Institution Forum held in October 1978. The Forum brought together the Friends of the Earth and the United Kingdom Atomic Energy Authority to discuss their opposing views concerning energy policy and nuclear power in the UK. The volume begins by presenting the opening address given by Dr John Cunningham, Parliamentary Under-Secretary of State at the UK Department of Energy, where he emphasized the Government's commitment to open debate and the need to 'ensure that the development of nuclear power does not outstrip public acceptance and understanding of what it involves'. The remainder to the text is devoted to the papers presented and discussions held during separate sessions on the energy problem, strategies for the future, alternative energy sources, the technological demands of nuclear power, the international proliferation of nuclear weapons, and policy steps for the UK. The text concludes with a review of the Forum.

  • Energy for Rural and Island Communities

    Proceedings of the Fourth International Conference Held at Inverness, Scotland, 16–19 September 1985
    • 1st Edition
    • John Twidell + 2 more
    • English
    Scotland

  • Assessment of Research Needs for Advanced Fuel Cells

    • 1st Edition
    • S. S. Penner
    • English
    Assessment of Research Needs for Advanced Fuel Cells covers the status of fuel cell research and development efforts, as well as inputs on research needs. Chapter 1 presents a summary of research recommendations and Chapters 2-6 describes the surveys on salient features of individual fuel cell types, including elaborations of long-term research needs relating to the expeditious introduction of improved fuel cells. The book further tackles phosphoric acid fuel cells; alkaline fuel cells; solid polymer electrolyte fuel cells; molten carbonate fuel cells; and high-temperature solid-oxide fuel cells.

  • Coal, Gas and Electricity

    Reviews of United Kingdom Statistical Sources
    • 1st Edition
    • D. J. Harris + 2 more
    • W. F. Maunder
    • English
    Coal, Gas and Electricity is a review of statistical data available for three fuel industries in the United Kingdom: coal, gas, and electricity. Topics covered include energy planning, comparability of fuels, published energy statistics, and energy consumption. This volume is comprised of five chapters and begins by explaining the purpose of energy statistics, such as to provide figures for the total production and consumption of energy and to identify the consumption of energy in sectors of the economy. A brief summary of industry activity concerned and its organization is given in order to present a clear background understanding of how data are collected; what is being measured; the stage at which measurements are made; what the reporting units are; the channels through which returns are routed; and where they are processed. The formulation of a national energy research and development strategy in the United Kingdom is then discussed, along with the comparability of fuels and government-published energy statistics. The last chapter presents statistics on energy consumption. This book will be of interest to energy officials, statisticians, economists, and social science researchers.

  • Hydrides for Energy Storage

    Proceedings of an International Symposium Held in Geilo, Norway, 14 - 19 August 1977
    • 1st Edition
    • A. F. Andresen + 1 more
    • English
    Hydrides for Energy Storage documents the proceedings of an International Symposium held in Geilo, Norway on August 14-19, 1977. This book discusses the thermodynamics of metal, alloy and intermetallic/hydrog... systems; localization and diffusion of hydrogen in lanthanum-nickel compounds; kinetics of hydrogen absorption and desorption; and nuclear magnetic resonance studies of metal hydrides. The calculated heats of formation of metal and metal alloy hydrides; hydrogen absorption into rare earth intermetallic compounds; plateau pressure of RE Ni5 and RE Co5 hydrides; and hydride formation of C14-type Ti alloy are also elaborated. This text likewise covers the mixing effects of two different types of hydrides; hydrogen storage electrode systems; and applications of metal hydrides. This publication is intended for chemists concerned with the fundamental properties of hydrides.

  • Analytical Methods for Coal and Coal Products

    Volume III
    • 1st Edition
    • Clarence Karr
    • English
    Analytical Methods for Coal and Coal Products, Volume III, is the third of a three-volume treatise that aims to provide a detailed presentation of what constitutes the first comprehensive reference work devoted exclusively to the subject of analytical methodology for coal and coal products. The three volumes have been divided into a total of twelve parts, each part containing several chapters devoted to a particular subject. The present volume deals with gases, waste products, by-products, environmental problems, and miscellaneous analytical problems, as well as special instrumental techniques for solving various problems. Because different aspects of a particular subject are frequently scattered through various chapters in the volumes, cross-references between chapters have been entered. In addition, the subject indexes have been made as detailed as was practical, and the reader will benefit from examination of pertinent subjects in the indexes of all three volumes. A careful reading of these volumes will show that definitive solutions are not yet available in a number of instances. There is a clear need for continued research on the fundamentals of analysis of coal and coal products, and the development of reliable and accurate analytical instrumentation, including on-stream applications.

  • Analytical Methods for Coal and Coal Products

    Volume II
    • 1st Edition
    • Clarence Karr
    • English
    Analytical Methods for Coal and Coal Products, Volume II, aims to provide a detailed presentation of what constitutes the first comprehensive reference work devoted exclusively to the subject of analytical methodology for coal and coal products. The various chapters have been arranged according to either a specific coal process or a specific coal use problem. The topics discussed include the structure of coal and coal products, minerals in coal, coal carbonization products, and coal combustion products. The general philosophy of this work is to strike a balance between sophisticated analyses based on expensive instrumentation such as mass or nuclear magnetic resonance spectrometers, and the more common, less expensive equipment typically employed in the standard methods. Likewise there is an attempt to strike a balance between the expertise available from within the United States and that found in other countries, offering a broader viewpoint. Altogether, a large number of cross references have been entered in these chapters to enable the reader to make maximum use of pertinent information in all of the chapters.

  • Hot Carriers in Semiconductors

    Proceedings of the Fifth International Conference, 20-24 July 1987, Boston, MA, U.S.A.
    • 1st Edition
    • J. Shah + 1 more
    • English
    A comprehensive account of the latest developments in the rapidly expanding area of Semiconductor Technology. Main topics covered include real space transfer/heterostruc... ultrafast studies, optical studies, transport theory, devices, ballistic transport, scattering processes and hot phonons, tunnelling, far infrared and magnetic field studies and impact ionization/noise/cha... Other aspects include the use of femtosecond lasers in investigating transient hot carrier effects on femtosecond timescales, magnetotransport and carrier-carrier interactions.

  • Advanced Computational and Design Techniques in Applied Electromagnetic Systems

    Proceedings of the International ISEM Symposium on Advanced Computational and Design Techniques in Applied Electromagnetic Systems, Seoul, Korea, 22-24 June, 1994
    • 1st Edition
    • S.-Y. Hahn
    • English
    This symposium was concerned with advanced computational and design techniques in applied electromagnetic systems including devices and materials. The scope of the proceedings cover a wide variety of topics in applied electromagnetic fields: optimal design techniques and applications, inverse problems, advanced numerical techniques, mechanism and dynamics of new actuators, physics and applications of magnetic levitation, electromagnetic propulsion and superconductivity, modeling and applications of magnetic fluid, plasma and arc discharge, high-frequency field computations, electronic device simulations and magnetic materials.

  • Atmospheric Fluidized Bed Coal Combustion

    Research, Development and Application
    • 1st Edition
    • Volume 22
    • M. Valk
    • English
    The use of fluidized bed coal combustion technology has been developed in the past decade in The Netherlands with a view to expanding the industrial use of coal as an energy supply. Various research groups from universities, institutes for applied science and from boiler industries participated and contributed to this research area. Comprehensive results of such recent experimentation and development work on atmospheric fluidized bed combustion of coal are covered in this volume. Each chapter, written by an expert, treats one specific subject and gives both the theoretical background as well as experimental results and verifications.Though the contents deal primarily with coal combustion, much information proved applicable and relevant for the combustion or incineration of other solid fuels and waste in a fluidized bed. Results of extended research and fundamental backgrounds are presented in order to provide the designer and operator of fluidized bed combustors with more complete and systematic information needed for an optimal design and operation. The design and operating experience of a full scale fluidized bed boiler are discussed and compared with the results of theoretical and experimental research on pilot plant scale.

  • Processing and Utilization of High-Sulfur Coals V

    Proceedings of the Fifth International Conference on Processing and Utilization of High-Sulfur Coals, October 25-28, 1993, Lexington, Kentucky, U.S.A.
    • 1st Edition
    • Volume 21
    • B.K. Parekh + 1 more
    • English
    Utilization of high sulfur coals is becoming increasingly difficult in view of tighter environmental regulations being imposed around the world. To meet the challenge of utilizing high sulfur coals without damaging the environment, many scientists and engineers around the world are engaged in developing novel technologies. In the U.S.A. alone, the federal government has spent about five billion dollars to achieve that goal.This conference, like its predecessors, emphasizes desulfurization with papers on physical and chemical cleaning as well as post-treatment and fluid-bed combustion technologies. Of the 45 papers submitted, 15 papers deal with physical cleaning and 7 deal with chemical cleaning of coal, suggesting that a major emphasis is still be placed on pre-cleaning of coal. The post-treatment technologies, being developed with the support of U.S. federal and state government agencies, emphasize removal of both SOx and NOx gases.The book will be of particular interest and benefit to researchers, graduate students and other people involved in coal processing, characterization and utilization; public policy making and administration related to energy conservation, economic development, and environmental protection; and investors in industry and new technology.

  • Alternative Energy Sources

    Kuwait Foundation for the Advancement of Sciences
    • 1st Edition
    • Jamal T. Manassah
    • English
    Alternative Energy Sources, Part B contains the proceedings of the Alternative Energy Sources Symposium of the International Symposium Series of the Kuwait Foundation for the Advancement of Sciences, held in Kuwait in February 1980. The symposium provided a forum for discussing alternative energy sources and for reviewing and assessing those technologies that complement and will most likely replace oil and gas extracted by conventional techniques. Comprised of seven chapters, this book begins with an overview of the state of the art in nuclear fission power plants, along with the basics of nuclear fission and energy derived from nuclear reactions. The discussion then turns to fusion power and its prospects; the state of the art of energy storage systems used by electric utilities for peak shaving; and the outlook for transportation and energy through 2000. The next chapter focuses on the shortcomings of techniques that are typically used for the comparative evaluation of energy projects and suggests improvements, based on a present value approach, which allow for a more meaningful comparison. Mathematical techniques for the analysis of capital ventures are also described, with special reference to investments in the field of energy. The final chapter sets into context the mechanics of Third World development and the role of alternative energy systems in that process. This monograph will be of interest to researchers in the energy field as well as energy policymakers.

  • Texas National Energy Modeling Project

    An Experience in Large-Scale Model Transfer and Evaluation
    • 1st Edition
    • Milton L. Holloway
    • English
    Texas National Energy Modeling Project: An Experience in Large-Scale Model Transfer and Evaluation reports on the Texas National Energy Model Project (TNEMP) experience. The TNEP was tasked with providing an independent evaluation of the Energy Information Administration's (EIA) Midterm Energy Forecasting System. It also provided recommendations to the Texas Energy Advisory Council concerning the maintenance of a national modeling system by the Council to evaluate Texas impacts within a consistent national modeling framework. The book provides all of the summary material documenting the entire experience, sequentially, from beginning to end. It first lays out the purposes of TNEMP, the organizational structure for the study, and an explanation of the evaluation criteria used to guide the model critiques. It summarizes in some detail the important findings of each of the 11 studies contained in Part II published under a separate cover. It presents the National Advisory Board’s assessment of the integrity of the evaluation project, their views of important outcomes of the TNEMP experience, and important recommendations to TNEMP and EIA. The final chapters contain an overview reply by EIA and a summary of a workshop held at the end of the project to discuss substantive issues raised by TNEMP.

  • Energy and Combustion Science

    • 1st Edition
    • N. A. Chigier
    • English
    Energy and Combustion Science is a collection of papers that covers advancement in the field of energy and combustion science. The materials presented in the book are organized thematically into parts. The text first covers the issues, concerns, problems of the contemporary combustion technology. The subsequent parts of the book cover various areas in combustions science, namely, pollution, gas, oil, coal, and engines. Most of the articles in the book are concerned with the byproduct of fuel combustion. The text will be of great use to students, researchers, and practitioners of disciplines that deal with the energy and combustion technology.

  • Methods of Working Coal and Metal Mines

    Planning and Operations
    • 1st Edition
    • Seth D. Woodruff
    • English
    Methods of Working Coal and Metal Mines, Volume 3 discusses the extraction of mineral deposits, which involves the driving of development openings, from the surface or a central shaft, to the “block out” portions of the deposit. This book is divided into three parts. Part A describes the coal mining methods, which include pillar mining systems and long-wall mining. Economics of coal face mechanization is also discussed. In Part B, the classification of stoping systems, which is comprised of pillar-supported stopes, timber and fill supported stopes, and slicing or caving systems, is elaborated. This part also emphasizes the mining bedded metalliferous ores, as well as the costs and other factors affecting the choice of mining systems. Part C deliberates the surface mining methods, which consist of strip mining of coal, open-pit mining, and stability of pit slopes. This publication is intended for mining engineers, but is also useful to students and researchers conducting work on the application of extracting and processing minerals.

  • Combustion, Flames and Explosions of Gases

    • 2nd Edition
    • Bernard Lewis
    • English
    Combustion, Flames, and Explosions of Gases, Second Edition focuses on the processes, methodologies, and reactions involved in combustion phenomena. The publication first offers information on theoretical foundations, reaction between hydrogen and oxygen, and reaction between carbon monoxide and oxygen. Discussions focus on the fundamentals of reaction kinetics, elementary and complex reactions in gases, thermal reaction, and combined hydrogen-carbon monoxide-oxygen reaction. The text then elaborates on the reaction between hydrocarbons and oxygen and combustion waves in laminar flow. The manuscript tackles combustion waves in turbulent flow and air entrainment and burning of jets of fuel gases. Topics include effect of turbulence spectrum and turbulent wrinkling on combustion wave propagation; ignition of high-velocity streams by hot solid bodies; burners with primary air entrainment; and description of jet flames. The book then takes a look at detonation waves in gases; emission spectra, ionization, and electric-field effects in flames; and methods of flame photography and pressure recording. The publication is a valuable reference for readers interested in combustion phenomena.

  • Energy-Linked Functions of Mitochondria

    Papers Presented at the First Colloquium of the Johnson Research Foundation of the University of Pennsylvania, Philadelphia, April 13, 1963
    • 1st Edition
    • Britton Chance
    • English
    Energy-Linked Functions of Mitochondria presents the developments in the area of energy-linked functions of mitochondria. This book covers three general topics, namely, the generation, the transfer, and the utilization of reducing power. Organized into three parts encompassing 16 chapters, this book begins with an overview of the various steps involved in the combined electron and energy transfer reactions that lead to the generation of high-energy intermediates. This text then examines the effect of atracytloside and oligomycin on oxidative phosphorylation in submitochondrial particles. Other chapters consider a detailed review of the succinate-linked DPN reduction in submitochondrial particles. This book discusses as well the concept of energy-linked reversal of electron transport from reduced cytrochome c to pyridine nucleotide. The final chapter deals with the transient activation of respiration of tightly coupled mitochondria by adding low concentrations of calcium. This book is a valuable resource for scientists who are interested in energy-linked processes in mitochondria.

  • Energy for Rural and Island Communities

    Proceedings of the Conference, Held in Inverness, Scotland, 22-24 September 1980
    • 1st Edition
    • John Twidell
    • English
    Energy for Rural and Island Communities covers the proceedings of the conference held in Inverness, Scotland on September 22-24, 1980, which aims to gather several professionals concerned with energy supplies for island and rural communities in the 1980s. The papers in this collection are divided into six themes. The first three major topics the papers tackle are the strategy and action in providing energy resource to rural and island communities; the community energy use and generation; and the renewable energy supplies. Other papers discuss several energy sources such as wind, water, and solar. The last part is devoted to presenting papers on development and planning in relation to energy consumption of island and rural communities. This compendium will be invaluable to government and private sectors, educational institutions, and others interested in studying the energy resource, consumption, and generation for island and rural populations.

  • The Efficient Use of Energy

    • 2nd Edition
    • I.G.C. Dryden
    • English
    The Efficient Use of Energy, Second Edition is a compendium of papers discussing the efficiency with which energy is used in industry. The collection covers relevant topics in energy handling and describes the more important features of plant and equipment. The book is organized into six parts. Part I presents the various methods of heat production. The second part discusses the use of heat in industry and includes topics in furnace design, industrial heating, boiler plants, and water treatment. Part III deals with the production of mechanical and electrical energy. It tackles the principles of internal combustion engines, generators, and the use of nuclear energy. Total energy systems and heat salvage are covered in Part IV. Part V elucidates on the use of refractory and insulating materials and the importance of instrumentation and control in the regulation of energy consumption. The final section focuses on the environmental aspect of energy production such as the control of pollutants emanating from plants during production. The book will be of use to engineers and plant production managers.

  • Kimberlites

    II: The Mantle and Crust - Mantle Relationships
    • 1st Edition
    • Volume 11B
    • J Kornprobst
    • English
    Developments in Petrology, 11B: Kimberlites, II: The Mantle and Crust-Mantle Relationships focuses on the formation, characteristics, and properties of kimberlites. The selection first offers information on silicate and oxide inclusions in diamonds and diamond eclogite and graphite eclogite xenoliths from Orapa, Botswana. The text also ponders on petrography, petrology, and geochemistry of xenoliths and megacrysts from the Geronimo Volcanic Field in Arizona and two-pyroxene megacrysts from South African kimberlites. The text elaborates on the nature of the upper-most mantle beneath Victoria, Australia as deduced from ultramafic xenoliths and depleted mantle rocks and metasomatically altered peridotite inclusions in tertiary basalts from the Hessian Depression. Topics include area and rocks of investigation, composition, abundance, and properties of metasomatically altered mantle, and petrography and mineralogy. The selection is a dependable source of information for readers interested in the formation, properties, and characteristics of kimberlites.

  • Europe's Nuclear Power Experiment

    History of the OECD Dragon Project
    • 1st Edition
    • E. N. Shaw
    • English
    Europe's Nuclear Power Experiment: History of the OECD Dragon Project discusses the achievements of the Project, which is regarded as one of Europe's most successful collaborations in applied science and certainly the most important multinational technical collaboration in the field of nuclear energy. The Project is centered on the construction of a nuclear reactor that is to demonstrate the essential properties of a new system, designed to produce higher temperatures than could be achieved with the first generation of reactors. After a brief introduction to the political collaboration and technical development of the Project, this 28-chapter goes on dealing with the competitive forms of cooperation in nuclear energy and the function of the European Nuclear Energy Agency. The succeeding chapters survey various aspects of nuclear reactor and the Dragon Project Agreement, its long-term role, research and development, industrialization, and supervision by the signatories. Other chapters consider other details and contributions of various member countries in the Project. The concluding chapters discuss the Project's extension program and its achievements. This book is of value to nuclear power scientists and researchers.

  • Energy and Sea Power

    Challenge for the Decade
    • 1st Edition
    • Don Walsh + 1 more
    • English
    Energy and Sea Power: Challenge for the Decade is a collection of essays, which were presented as lectures at the Eighth Annual Pacific Coast Sea Power Forum, held at the U. S. Navy Postgraduate School at Monterey, California, in October 1980, covering the topic of energy and sea power. The book contains papers on world energy availability, its use and economic impact, and on more specialized topic areas such as environmental protection, ship construction for energy efficiency, and the question of renewable ocean energy resources. The text also presents papers on the regulatory and environmental aspects of ocean energy activities; the directions over old sea lanes; and marine transportation needs for U.S. energy supply; energy. The military applications and implications of ocean thermal energy conversion systems; the ocean engineering needs for U.S. energy supply; and the energy-efficient ship design are also considered. The further presents a paper on the shipbuilding needs for support of ocean-energy development.

  • Combustion of Liquid Fuel Sprays

    • 1st Edition
    • Alan Williams
    • English
    Combustion of Liquid Fuel Sprays outlines the fundamentals of the combustion of sprays in a unified way which may be applied to any technological application. The book begins with a discussion of the general nature of spray combustion, the sources of liquid fuels used in spray combustion, biomass sources of liquid fuels, and the nature and properties of fuel oils. Subsequent chapters focus on the properties of sprays, the atomization of liquid fuels, and the theoretical modeling of the behavior of a spray flame in a combustion chamber. The nature and control of pollutants from spray combustion, the formation of deposits in oil-fired systems, and the combustion of sprays in furnaces and engines are elucidated as well. The text is intended for students undertaking courses or research in fuel, combustion, and energy studies.

  • Fission, Fusion and The Energy Crisis

    • 2nd Edition
    • S. E. Hunt
    • English
    Fission, Fusion and the Energy Crisis, Second Edition focuses on the importance of the breeder reactor to the efficient use of nuclear fuel reserves. This book examines the interrelationships of the scientific, technological, economic, and ecological aspects of nuclear power and considers the debate on the possible danger of a ""plutonium economy."" This monograph is comprised of 12 chapters and opens with a discussion on the energy requirements and available fuel supplies on a global scale, with emphasis on capital fuel reserves and renewable energy sources. An overview of the atom and its nucleus, mass, and energy is then presented. The following chapters explore the process of nuclear fission and how it can be used to produce a hydrogen bomb; natural uranium reactors and enriched reactors; the control and safety of nuclear reactors; and the short- and long-term economics of nuclear power stations. The nuclear power programs of some countries such as Canada, Britain, and the United States are also considered. Finally, the nuclear fusion process and attempts to control it for use in the production of heat and electricity are analyzed. This text is intended for nuclear scientists and undergraduate students.

  • Energy Balances and Energy Accounting

    Energiebilanzen und Energiebuchhaltung
    • 1st Edition
    • Sam Stuart
    • English
    Energy Balances and Energy Accounting, an extract from the book Energy Terminology: A Multilingual Glossary, is a multi-lingual glossary of different terms and concepts related to energy and energy accounting. The definitions covered in this book include general terms and concepts in the study of energy, energy balances, additional energy accounting terms, and energy use. Concise yet very informative, this book is a good reference for those who are studying or working in the field of physics, those who do not have English as their primary language, and those working in the countries that use French, Spanish, and German as their national language.

  • Energy Resources

    • 1st Edition
    • Andrew L. Simon
    • English
    Energy Resources mainly focuses on energy, including its definition, historical perspective, sources, utilization, and conservation. This text first explains what energy is and what its uses are. This book then explains coal, oil, and natural gas, which are some of the common energy sources used by various industries. Other energy sources such as wind, solar, geothermal, water, and nuclear energy sources are also tackled. This text also looks into fusion energy and techniques of energy conversion. This book concludes by explaining the energy allocation and utilization crisis. This publication will be invaluable to those interested in energy science.

  • Siting Energy Facilities

    • 1st Edition
    • Ralph L. Keeney
    • English
    Siting Energy Facilities describes a tool for making the process of finding sites for energy facilities more efficient and more responsive to the concerns of society. The result should be better sites and a siting process that is understandable and defensible. A major focus of the approach is the systematic search for and identification of suitable candidate sites for the proposed facility. The evaluation of the candidate sites explicitly includes environmental impacts, health and safety, socioeconomic effects, and public attitudes, in addition to engineering and economic criteria. The procedure allows the inclusion of the uncertainties and value judgments that are a significant part of all energy siting problems. The material in this book can be categorized into three sections: problem definition, the methodological and procedural aspects of the decision analysis siting approach, and illustrations of its use. The first two chapters define what is meant by an energy facility siting problem and indicate the approach and motivation for the decision analysis siting procedure. Subsequent chapters discuss methodological and procedural details of the approach along with a case study on the selection of a site for a pumped storage power plant.

  • The Energy Saving Guide

    Tables for Assessing the Profitability of Energy Saving Measures with Explanatory Notes and Worked Examples
    • 1st Edition
    • George Helcké
    • English
    The Energy Saving Guide: Tables for Assessing the Profitability of Energy Saving Measures with Explanatory Notes and Worked Examples describes the means of comparing investment in energy saving measures with other types of financial investment. This book is composed of nine chapters and begins with an introduction to the Present Value concept and the effect of energy price inflation rate on energy savings. The next chapters consider the annual maintenance charges of an energy saving system and the investment deferment to achieve cost effectiveness within a defined period. A chapter presents several examples to illustrate the method of assessing the cost-effectiveness of various energy saving investments. The final chapters provide the mathematical background and tables for the Present Value concept and values. This book is intended for economists and non-specialists.

  • Coal Science

    • 1st Edition
    • Martin L. Gorbaty + 2 more
    • English
    Coal Science, Volume 3 presents and evaluates selected fundamental scientific areas on coal structure, reactivity, and utilization. This book describes the organic geochemistry of coal, role of oxygen functionality in coal and coal liquids reactivity, chemistry of hydrocarbon syntheses from carbon monoxide and hydrogen, and chemistry of coal in carbon monoxide/water systems. Other topics discussed include intermediates and mechanisms of the FTS of hydrocarbons; synthesis of oxygenates; and structural features of vitrinite macerals. The molecular weight determination for coal derivatives; thermal reactions of oxygen compounds; and alternative methods for removing oxygen compounds from coal-derived liquids are also elaborated. This publication likewise covers the aqueous coal conversions and conversion mechanism. This volume serves as a valuable source of information and guide to scientists and researchers interested in the coal literature.

  • Energy Policy and Land-Use Planning

    An International Perspective
    • 1st Edition
    • Volume 32
    • D. R. Cope + 2 more
    • English
    This book fills a gap in the available literature on energy policy by dealing with the relationship between energy and land-use planning. It considers, in a systematic way, energy developments in national, regional and local planning policy contexts, concentrating particularly on energy supply issues in Europe.

  • Structural Integrity Research of the Electric Power Research Institute

    Palo Alto, California, USA
    • 1st Edition
    • Stanley H. Fistedis
    • English
    Structural Integrity Research of the Electric Power Research Institute presents the result of the mission of the Electric Power Research Institute to conduct research and development promoting the clean, safe, and economical generation of power by the utility industry. This book covers nuclear plant design, licensing, and regulation questions. Organized into 13 chapters, this book begins with an overview of the primary motivations for structural integrity research, including insights into reactor safety from probabilistic risk assessments and the increasing costs of plant structural components. This text then examines the SIMQUAKE series of field tests on model containment structures. Other chapters consider the methodology for realistically predicting fluid–structure interaction transient loads and the structural response of the reactor vessel, core support barrel, and core. This book discusses as well the ABAQUS finite element program. The final chapter deals with high-amplitude dynamic tests. This book is a valuable resource for engineers.

  • Welding in Energy-Related Projects

    • 1st Edition
    • Sam Stuart
    • English
    Welding in Energy-Related Projects contains the proceedings of the Welding Institute of Canada’s Second International Conference held in Toronto, 20-21 September 1983, on the theme ""Welding in Energy-Related Projects."" The contributions to the conference offer a unique overview of many areas of technology from research and development studies to construction and operation, and as such provide a comprehensive reference source. This volume contains 44 papers organized into eight sections. Section I contains studies on materials and weldability of steels for energy structures. Section II covers welding techniques such as flux-cored arc welding, root pass welding, and automatic welding. Section III on welding control systems includes studies on such as integrated robotic welding and microprocessor technology in automatic integrated welding systems. Sections IV and V presents studies on welding of high-alloy systems and welding procedure optimization, respectively. Section VI covers quality assurance and inspection of piping systems. Section VII takes up the properties of welds. Section VIII presents stress and strain analyses of welds.

  • The Problems of Sulphur

    Reviews in Coal Science
    • 1st Edition
    • Sam Stuart
    • English
    The Problems of Sulphur discusses all aspects of the problems associated with sulfur in coal. The book is divided into three parts. Part 1 addresses the forms of sulfur in coal and evaluates processes directed at the chemical removal of sulphur. Part 2 expands on this to look at alternative means of removing sulfur both physically and biologically, sulfur removal during the combustion of coal and flue gas desulfurization processes. Part 3 looks at the role of sulphates in the atmosphere from the points of view of their formation, transport and deposition and of their effects on health, materials and the atmosphere. The book will be of value to engineers, environmentalists, and chemists.

  • The Strength, Fracture and Workability of Coal

    A Monograph on Basic Work on Coal Winning Carried Out by the Mining Research Establishment, National Coal Board
    • 1st Edition
    • Ivor Evans + 1 more
    • English
    The Strength, Fracture and Workability of Coal deals with the strength of coal and the way in which various aspects of strength enter into the processes of mechanical winning. This book aims to provide rationalization of the design of coal winning machines for use in British mines and an increase of efficiency in existing machines. This book is composed of 14 chapters, and begins with a description of a stratified structure comprising a number of components of coal. This topic is followed by detailed measurements on a bituminous and an anthracite coal using static and dynamic techniques. The subsequent chapters are devoted to the definition and determination of coal's mechanical properties, such as compressive, tensile, and routine strength, particle size distribution, breakage, friction, and wedge penetration. The concluding chapters cover the mechanics of certain possible modes of interaction of coal and tool. These chapters also examine the theoretical aspects of the cutting and ploughing of coal. This book will prove useful to coal mining engineers, designers, and researchers.

Related subjects