
Analytical Methods for Coal and Coal Products
Volume III
- 1st Edition - January 28, 1979
- Imprint: Academic Press
- Editor: Clarence Karr
- Language: English
- Paperback ISBN:9 7 8 - 1 - 4 8 3 2 - 4 1 3 3 - 3
- Hardback ISBN:9 7 8 - 0 - 1 2 - 3 9 9 9 0 3 - 0
- eBook ISBN:9 7 8 - 1 - 4 8 3 2 - 7 3 1 7 - 4
Analytical Methods for Coal and Coal Products, Volume III, is the third of a three-volume treatise that aims to provide a detailed presentation of what constitutes the first… Read more

Purchase options

Institutional subscription on ScienceDirect
Request a sales quoteAnalytical Methods for Coal and Coal Products, Volume III, is the third of a three-volume treatise that aims to provide a detailed presentation of what constitutes the first comprehensive reference work devoted exclusively to the subject of analytical methodology for coal and coal products. The three volumes have been divided into a total of twelve parts, each part containing several chapters devoted to a particular subject. The present volume deals with gases, waste products, by-products, environmental problems, and miscellaneous analytical problems, as well as special instrumental techniques for solving various problems. Because different aspects of a particular subject are frequently scattered through various chapters in the volumes, cross-references between chapters have been entered. In addition, the subject indexes have been made as detailed as was practical, and the reader will benefit from examination of pertinent subjects in the indexes of all three volumes. A careful reading of these volumes will show that definitive solutions are not yet available in a number of instances. There is a clear need for continued research on the fundamentals of analysis of coal and coal products, and the development of reliable and accurate analytical instrumentation, including on-stream applications.
List of Contributors
Preface
Contents of Volumes I and II
Part IX Analysis of Gases
Chapter 38 Coke Oven Gas Analysis
I. Introduction
II. Coke Oven Gas Flow Diagram
III. Determining End of Coking Cycle by Gas Analysis
IV. Ammonia
V. Naphthalene
VI. Aromatics
VII. H2S and HCN
References
Chapter 39 Characterization of Recovered Volatiles from a High Methane Coal and the Significance of These Findings
I. Introduction
II. Experimental
III. Data Processing
IV. Discussion of Results
V. Summary
References
Chapter 40 Characterization of Coals Using Laser Pyrolysis—Gas Chromatography
I. Introduction
II. Thermal Treatment and Laser Interactions with Coals
III. Control of Laser Thermal Pyrolysis
IV. Laser Pyrolysis Methodology
V. Laser Pyrolysis of Coal
VI. Plasma Stoichiometric Analysis on Coal Samples
VII. Laser Pyrolysis of Coals in Reactive Atmospheres
VIII. Status of Laser Pyrolysis and Areas for Future Work
References
Chapter 41 Product Stream Analysis from an Underground Coal Gasification Test
I. Introduction
II. Coal Tar and Water Determination
III. Major Gas Component Analysis
IV. Remote Sampling of Gas Components
V. Manual Monitoring Techniques
VI. Conclusion
References
Part X Waste Product Streams and Environmental Problems
Chapter 42 Analysis of Mineral Matter in Coal, Coal Gasification Ash, and Coal Liquefaction Residues by Scanning Electron Microscopy and X-Ray Diffraction
I. Introduction
II. Scanning Electron Microscopy in the Analysis of Coal Conversion Wastes
III. X-Ray Diffraction in the Analysis of Coal and Coal Conversion Wastes
References
Chapter 43 Analyses of Coke Oven Effluents for Polynuclear Aromatic Compounds
I. Introduction
II. Techniques of Collection of Air Samples
III. Techniques of Analysis
IV. Measured Levels of Polynuclear Aromatic Compounds
References
Chapter 44 The Production, Management, and Chemistry of Coal Gasification Wastewaters
I. Introduction
II. Process Water Balances
III. Satisfying Process Water Balances
IV. Strategies for Characterization of Coal Gasification Pilot Plant Wastewater Effluents
V. Quench Water Composition and Chemistry
VI. Summary and Conclusions
References
Chapter 45 Environmental Characterization of Products and Effluents from Coal Conversion Processes
I. Introduction
II. Sampling Methods
III. Analytical Methods
IV. Applications
V. Conclusions
References
Part XI Special Instrumental Techniques for Analysis of Coal and Its Products
Chapter 46 Instrumental Activation Analysis of Coal and Coal Ash with Thermal and Epithermal Neutrons
I. Introduction
II. Instrumental Neutron Activation Analysis
III. Activation with Epithermal Neutrons
IV. Experimental Procedures
V. Comparison of Results Obtained by Thermal and Epithermal Activation
VI. Conclusion
References
Chapter 47 Fast-Neutron Activation Analysis for Oxygen, Nitrogen, and Silicon in Coal, Coal Ash, and Related Products
I. Introduction
II. Instrumentation
III. Methods
IV. Discussion and Conclusions
References
Chapter 48 Electron Probe Micro-analyzer in Coal Research
I. History
II. Electron Probe Microanalysis
III. Applications
IV. Conclusion
References
Chapter 49 X-Ray Fluorescence Analysis of Trace Elements in Coal and Solvent Refined Coal
I. Introduction
II. Analytical Procedures
III. Results and Discussion
IV. Conclusion
References
Chapter 50 Mossbauer Analysis of Iron-Bearing Phases in Coal, Coke, and Ash
I. Introduction 372
II. Mossbauer Spectroscopy
III. Mossbauer Analysis of Iron-Bearing Minerals in Coal
IV. Geological and Environmental Information from Mossbauer Data
V. Quantitative Determination of Pyritic Sulfur in Coal by Mossbauer Spectroscopy
VI. Mossbauer Studies of Coke
VII. Mossbauer Studies of Ash
VIII. Other Applications of Mossbauer Spectroscopy
IX. Conclusions and Possible Future Directions
Appendix: Summary of Iron Distribution between Minerals for Some United States Coal Seams
References
Chapter 51 Fingerprinting Solid Coals Using Pulse and Multiple Pulse Nuclear Magnetic Resonance
I. Introduction
II. Proton NMR
III. Carbon NMR
IV. The Future
References
Chapter 52 Differential Thermal Analysis of Coal Minerals
I. Introduction
II. Differential Thermal Analysis (DTA)
III. Characteristic DTA Curves of Minerals Found in Coal
IV. Differential Thermal Analysis of Coal
V. Differential Thermal Analysis of Coal/Mineral Mixtures
VI. Mineral Component Interaction and Peak Superposition
VII. Additional Aspects of Sample Preparation and Pretreatment
VIII. Conclusions
References
Part XII By-product Utilization and Miscellaneous Problems
Chapter 53 Prediction of Ash Melting Behavior from Coal Ash Composition
I. Introduction
II. Melting and Softening Behavior
III. Acids and Bases
IV. Ionic Potential
V. The Behavior of Iron
VI. Correlation Indicating Base Behavior
VII. Conceptual Structural Consideration
VIII. Summary
References
Chapter 54 Size Dependence of the Physical and Chemical Properties of Coal Fly Ash
I. Introduction
II. Morphology and Formation of Coal Fly Ash
III. Physical Properties of Coal Fly Ash: Particle Size Dependence
IV. Elemental Composition of Coal Fly Ash: Particle Size Dependence
V. Matrix and Surface Composition of Coal Fly Ash
References
Chapter 55 Problems of Oxygen Stoichiometry in Analyses of Coal and Related Materials
I. Introduction
II. Oxygen and Analysis of Coal
III. Oxygen in Coal Related Materials
References
Chapter 56 Sulfur Groups in Coal and Their Determinations
I. Introduction
II. Sample Preparation for Sulfur Analysis
III. Recommendations Relevant to Sample Preparation
IV. Sulfur in Coal Derived Materials (CDM)
V. Analysis of Sulfur in Coal and Solid Coal-Derived Materials
VI. Distribution of the Organic Sulfur Functional Groups
VII. Determination of the Distribution of Organic Sulfur Functional Groups Using Kinetograms
References
Index
- Edition: 1
- Published: January 28, 1979
- No. of pages (eBook): 660
- Imprint: Academic Press
- Language: English
- Paperback ISBN: 9781483241333
- Hardback ISBN: 9780123999030
- eBook ISBN: 9781483273174
Read Analytical Methods for Coal and Coal Products on ScienceDirect