Skip to main content
Elsevier

Books in Physical sciences and engineering

  • Small Hydropower

    Design and Analysis
    • 1st Edition
    • Sunil Kumar Singal + 3 more
    • English
    Small Hydropower: Design and Analysis presents a comprehensive guide to the design, operation and maintenance of small hydropower plants. Using detailed diagrams and illustrations, the book examines the classifications, components, equipment, feasibility and analysis of each aspect of SHPs. Following a broad introduction, the book discusses classification approaches based on head, discharge, capacity, etc., analyzes site selection, and gives an overview of key development stages. SHP components for civil engineering works and electro-mechanical equipment have dedicated chapters that are followed by a chapter on how to design new components for the civil, mechanical and electrical aspects of a plant. Subsequent chapters provide guidance on economic and financial analysis, environmental impact, troubleshooting and diagnosis in operating plants, and refurbishment and upgradation of SHPs, when and why this is needed, and how to approach it. Finally, several case studies provide real-world examples of SHPs in operation, giving readers insight into the practical needs of operating SHPs.

  • Combustion Chemistry and the Carbon Neutral Future

    What will the Next 25 Years of Research Require?
    • 1st Edition
    • Kenneth Brezinsky
    • English
    As the demands for cleaner, more efficient, reduced and zero carbon emitting transportation increase, the traditional focus of Combustion Chemistry research is stretching and adapting to help provide solutions to these contemporary issues. Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? presents a guide to current research in the field and an exploration of possible future steps as we move towards cleaner, greener and reduced carbon combustion chemistry. Beginning with a discussion of engine emissions and soot, the book goes on to discuss a range of alternative fuels, including hydrogen, ammonia, small alcohols and other bio-oxygenates, natural gas, syngas and synthesized hydrocarbon fuels. Methods for predicting and improving efficiency and sustainability, such as low temperature and catalytic combustion, chemical looping, supercritical fluid combustion, and diagnostic monitoring even at high pressure, are then explored. Some novel aspects of biomass derived aviation fuels and combustion synthesis are also covered. Combining the knowledge and experience of an interdisciplinary team of experts in the field, Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? is an insightful guide to current and future focus areas for combustion chemistry researchers in line with the transition to greener, cleaner technologies.

  • Graphene Quantum Dots

    Biomedical and Environmental Sustainability Applications
    • 1st Edition
    • Mohammad Oves + 3 more
    • English
    Graphene Quantum Dots: Biomedical and Environmental Sustainability Applications provides an overview of fundamentals and advances in applications of graphene quantum dots. Concepts covered include a brief introduction on the topic, an overview of structure and chemistry, fundamental properties of different characterization techniques, methods for the preparation of graphene quantum dots, and recent and emerging applications in various fields including antimicrobial therapy, bioimaging, biomedical tools development and clean energy for environmental sustainability. The book is a critical resource in materials selection for biomedical and environmental sustainability applications as well as various advanced imaging, disinfectant and environmental remediation technologies. As such, it is suitable for those in academia working in the discipline of materials science and engineering and practitioners working on biomedical tool development and environmental remediation.

  • The Electrocaloric Effect

    Materials and Applications
    • 1st Edition
    • Andrei L. Kholkin + 3 more
    • English
    The Electrocaloric Effect: Materials and Applications reviews the fundamentals of the electrocaloric effect, the most relevant electrocaloric materials, and electrocaloric measurements and device applications. The book introduces the electrocaloric effect, along with modeling and simulations of this effect. Then, it addresses the latest advances in synthesis, characterization and optimization of the most relevant electrocaloric materials, including ferroelectric materials, liquid materials, lead-free materials, polymers and composites. Finally, there is a review of the latest techniques in measurement and applications in refrigeration and cooling and a discussion of the advantages, challenges and perspectives of the future of electrocaloric refrigeration.

  • Concrete-Filled Double-Skin Steel Tubular Columns

    Behavior and Design
    • 1st Edition
    • Mostafa Fahmi Hassanein + 1 more
    • English
    Concrete-Filled Double-Skin Steel Tubular Columns: Behavior and Design provides a thorough review of the recent advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns. Drawing on their extensive knowledge and research, the authors cover topics such as different CFDST columns under axial compression, innovative techniques including the use of rubberised concrete, columns with different cross-sections, and steel material envelops and failure modes. This book is an overview of research carried out by this highly experienced and leading research group with specialist knowledge in the topic. It is an invaluable resource for researchers, graduates and post-graduate civil engineers and civil engineering designers.

  • Emerging Practices in Telehealth

    Best Practices in a Rapidly Changing Field
    • 1st Edition
    • Andrew M. Freeman + 1 more
    • English
    **Selected for 2026 Doody's Core Titles in Ambulatory**Emerging Practices in Telehealth: Best Practices in a Rapidly Changing Field is an introduction to telehealth basics, best practices and implementation methods. The book guides the reader from start to finish through the workflow implementation of telehealth technology, including EMRs, clinical workflows, RPM, billing systems, and patient experience. It also explores how telehealth can increase healthcare access and decrease disparities across the globe. Practicing clinicians, medical fellows, allied healthcare professionals, hospital administrators, and hospital IT professionals will all benefit from this practical guidebook.

  • Lakes of Africa

    Microbial Diversity and Sustainability
    • 1st Edition
    • Mostafa El-Sheekh + 1 more
    • English
    Lakes of Africa: Microbial Diversity and Sustainability examines microbial ecosystems in African lakes, including the history and formation of African lakes. The book describes how environmental stressors—including seasonal variations, climate change, and anthropogenic activities—affect microbial ecosystem dynamics in African lakes and the microbial responses to these stressors. The book explores and evaluates extremophiles in African lakes, including industrial biotechnology applications. The book highlights challenges facing microbial ecology in African lakes, as well as the design of models for solving these problems and predicting the future of lake microbial ecosystem sustainability.

  • Computational Modeling of Intelligent Soft Matter

    Shape Memory Polymers and Hydrogels
    • 1st Edition
    • Mostafa Baghani + 2 more
    • English
    Computational Modelling of Intelligent Soft Matter: Shape Memory Polymers and Hydrogels covers the multiphysics response of various smart polymer materials, such as temperature-sensitiv... shape memory polymers and temperature/ chemosensitive hydrogels. Several thermo–chemo-mechani... constitutive models for these smart polymers are outlined, and their real-world applications are highlighted. The numerical counterpart of each introduced constitutive model is also presented, empowering readers to solve practical problems requiring thermomechanical responses of these materials as well as design and analyze real-world structures made of them.

  • Geopolymer Concrete Structures with Steel and FRP Reinforcements

    Analysis and Design
    • 1st Edition
    • Mohamed Elchalakani + 3 more
    • English
    Geopolymer Concrete Structures with Steel and FRP Reinforcements: Analysis and Design focuses on structural behavior, including the aspects of compression, bending strength and combined action of GPC members, with the book's content based on published studies over the last two decades. Geopolymer concrete (GPC) structural members reinforced with FRP reinforcement have some advantages in resisting forces compared to conventional concrete or steel tubular members. Among the most important are the high strength and bending stiffness, fire and impact performance and favorable, construction ability and durability. To this end, there are no significant applications of these new structural elements worldwide, partly due to the lack of the understanding of their behavior and insufficient design provisions in different design manuals. This book, therefore, seeks to highlight their characteristics and future potential.

  • Power Quality in Power Systems, Electrical Machines, and Power-Electronic Drives

    • 3rd Edition
    • Ewald F. Fuchs + 1 more
    • English
    Power Quality in Power Systems, Electrical Machines, and Power-Electronic Drives uses current research and engineering practices, guidelines, standards, and regulations for engineering professionals and students interested in solving power quality problems in a cost effective, reliable, and safe manner within the context of renewable energy systems. The book contains chapters that address power quality across diverse facets of electric energy engineering, including AC and DC transmission and distribution lines; end-user applications such as electric machines, transformers, inductors, capacitors, wind power, and photovoltaic power plants; and variable-speed, variable-torque power-electronic drives. The book covers nonsinusoidal waveshapes, voltage disturbances, harmonic losses, aging and lifetime reductions, single-time events such as voltage dips, and the effects of variable-speed drives controlled by PWM converters. The book also reviews a corpus of techniques to mitigate power-quality problems, such as the optimal design of renewable energy storage devices (including lithium-ion batteries and fuel cells for automobiles serving as energy storage), and the optimal design of nonlinear loads for simultaneous efficiency and power quality.

  • Thermoacoustic Combustion Instability Control

    Engineering Applications and Computer Codes
    • 1st Edition
    • Dan Zhao
    • English
    Thermoacoustic Combustion Instability Control: Engineering Applications and Computer Codes provides a unique opportunity for researchers, students and engineers to access recent developments from technical, theoretical and engineering perspectives. The book is a compendium of the most recent advances in theoretical and computational modeling and the thermoacoustic instability phenomena associated with multi-dimensional computing methods and recent developments in signal-processing techniques. These include, but are not restricted to a real-time observer, proper orthogonal decomposition (POD), dynamic mode decomposition, Galerkin expansion, empirical mode decomposition, the Lattice Boltzmann method, and associated numerical and analytical approaches. The fundamental physics of thermoacoustic instability occurs in both macro- and micro-scale combustors. Practical methods for alleviating common problems are presented in the book with an analytical approach to arm readers with the tools they need to apply in their own industrial or research setting. Readers will benefit from practicing the worked examples and the training provided on computer coding for combustion technology to achieve useful results and simulations that advance their knowledge and research.

  • Cognitive Intelligence with Neutrosophic Statistics in Bioinformatics

    • 1st Edition
    • Florentin Smarandache + 1 more
    • English
    Cognitive Intelligence with Neutrosophic Statistics in Bioinformatics investigates and presents the many applications that have arisen in the last ten years using neutrosophic statistics in bioinformatics, medicine, agriculture and cognitive science. This book will be very useful to the scientific community, appealing to audiences interested in fuzzy, vague concepts from which uncertain data are collected, including academic researchers, practicing engineers and graduate students. Neutrosophic statistics is a generalization of classical statistics. In classical statistics, the data is known, formed by crisp numbers. In comparison, data in neutrosophic statistics has some indeterminacy. This data may be ambiguous, vague, imprecise, incomplete, and even unknown. Neutrosophic statistics refers to a set of data, such that the data or a part of it are indeterminate in some degree, and to methods used to analyze the data.

  • Thermal Protection Modeling

    • 1st Edition
    • A.S. Yakimov
    • English
    Thermal Protection Modeling presents the fundamental knowledge, applications, and methods of heat transfer augmentation techniques for current and future thermal protection systems. This book covers common challenges and their most appropriate solutions, presenting boundary conditions for the simulations of heat transfer and design of combined and active thermal protection. Important application aspects of heat transfer augmentation techniques in a single-phase system are compared in a practical way with a strong modeling approach. This book will provide a strong understanding of the current and future state of thermal protection systems and assist the reader in their own problem solving and modeling approaches.

  • Photodetectors

    Materials, Devices and Applications
    • 2nd Edition
    • Bahram Nabet
    • English
    Every bit of information that circulates the internet across the globe is a pulse of light, that at some point will need to be converted to an electric signal in order to be processed by the electronic circuitry in our data centers, computers, and cell phones. Photodetectors (PD’s) perform this conversion with ultra high speed and efficiency, in addition to being ubiquitously present in many other devices ranging from the mundane TV remote controls, to ultra high resolution instrumentation used in Laser Interferometer Gravitational Wave Observatory (LIGO) that reach the edge of the universe and measure gravitational waves. The second edition of "Photodetectors" fully updates the popular first edition with updated information covering the state-of-the-art in modern photodetectors. The 2nd edition starts with basic metrology of photodetectors and common figures-of-merit to compare various devices. It follows with chapters that discuss single-photon detection with Avalanche Photodiodes; organic photodetectors that can be inkjet printed; and silicon-germanium PDs popular in burgeoning field of Silicon Photonics. Internationally recognized experts contribute chapters on one-dimensional, nanowire, PDs as well as high speed zero-dimensional, quantum dot, versions that increase the spectral span as well as speed and sensitivity of PDs and can be produced on various substrates. Solar-blind PDs that operate in harsh environments such as deep space, or rocket engines, are reviewed and new devices in GaN technology . Novel Plasmonic PDs, as well as devices which employ micro-plasma of confined charge in order to make devices that overcome speed limitation of transfer of electronic charge, are covered in other chapters. Using different, novel technologies, CMOS compatible devices are described in two chapters, and ultra high speed PDs that use low-temperature-grow... GaAs (LT-GaAs) to detect fast THz signals are reviewed in another chapter. Photodetectors used in application areas of Silicon-Photonics and Microwave-Photonics are reviewed in final chapters of this book. All chapters are of a review nature, providing a perspective of the field before concentrating on particular advancements. As such, the book should appeal to a wide audience that ranges from those with general interest in the topic, to practitioners, graduate students and experts who are interested in the state-of-the-art in photodetection.

  • Dynamics of Plate Tectonics and Mantle Convection

    • 1st Edition
    • Joao C. Duarte
    • English
    Dynamics of Plate Tectonics and Mantle Convection, written by specialists in the field, gathers state-of-the-art perspectives on the dynamics of plate tectonics and mantle convection. Plate tectonics is a unifying theory of solid Earth sciences. In its initial form, it was a kinematic theory that described how the planet’s surface is fragmented into several rigid lithospheric plates that move in relation to each other over the less viscous asthenosphere. Plate tectonics soon evolved to describe the forces that drive and resist plate movements. The Earth sciences community is now developing a new perspective that looks at plate tectonics and mantle convection as part of a single system. Why does our planet have plate tectonics, and how does it work? How does mantle convection drive the supercontinent cycle? How have tectono-convective modes evolved over the Earth’s history? How did they shape the planet and impact life? Do other planets have mantle convection and tectonics? These are some of the fascinating questions explored in this book. This book started with a challenge from the editor to the authors to provide perspectives from their vantage point and open the curtain to the endeavors and stories behind the science.

  • Emerging Phytosynthesized Nanomaterials for Biomedical Applications

    • 1st Edition
    • Genevieve Dable-Tupas + 4 more
    • English
    Emerging Phytosynthesized Nanomaterials for Biomedical Applications provides readers with an increased understanding of the efficacy of phytochemicals obtained from plant extracts for the synthesis of nanomaterials, mechanism of formation, and the development of functional composites, all while still minimizing toxicity to humans and the environment. The book presents various novel biomedical applications of phytosynthesized nanomaterials for cancer, diabetes and cardiovascular treatment, drug delivery, antimicrobial agents, orthopedics, and biosensors, as well as pharmaceutical product development. This is an important reference source for biomaterials scientists and plant scientists looking to increase their understanding of how photosynthesized nanomaterials can be used in biomedical applications.

  • Reliability and Probabilistic Safety Assessment in Multi-Unit Nuclear Power Plants

    • 1st Edition
    • Senthil C. Kumar
    • English
    Reliability and Probabilistic Safety Assessment in Multi-Unit Nuclear Power Plants presents the risk contributions from single and multi-unit Nuclear Power Plants to help aggregate the risks that may arise due to applicable hazards and operating states. The book combines the key features of multi-unit risk assessment in one resource, reviewing the practices adopted in various countries around the globe to exemplify the dependencies between units on a site. These dependencies include multi-unit interactions, environmental stresses, the sharing of systems, and the sharing of human resource in a control room, factors which can all introduce an increase potential for heightened accident conditions. This book helps readers systematically identify events and evaluate techniques of possible accident outcomes within multi-units. It serves as a ready reference for PSA analysts in identifying a suitable site and the sharing of resources, while carrying out multi-unit risk assessments to ensure the safety of the public and the environment. It will also be valuable for nuclear researchers, designers and regulators of nuclear power plants, nuclear regulatory agencies, PSA engineers and practicing safety professionals.

  • Integer Optimization and its Computation in Emergency Management

    • 1st Edition
    • Zhengtian Wu
    • English
    Studies on integer optimization in emergency management have attracted engineers and scientists from various disciplines such as management, mathematics, computer science, and other fields. Although there are a large number of literature reports on integer planning and emergency events, few books systematically explain the combination of the two. Researchers need a clear and thorough presentation of the theory and application of integer programming methods for emergency management. Integer Optimization and its Computation in Emergency Management investigates the computation theory of integer optimization, developing integer programming methods for emergency management and explores related practical applications. Pursuing a holistic approach, this book establishes a fundamental framework for this topic, intended for graduate students who are interested in operations research and optimization, researchers investigating emergency management, and algorithm design engineers working on integer programming or other optimization applications.

  • Marine Phenolic Compounds

    Science and Engineering
    • 1st Edition
    • Jose Ricardo Perez Correa + 2 more
    • English
    Marine Phenolic Compounds: Science and Engineering is a comprehensive resource on these secondary metabolites. Phenolic compounds are secondary metabolites with increasing scientific, commercial and general population interest for their wide distribution, variety and potential applications Less studied than terrestrial sources, marine organisms contain highly interesting phenolic compounds due to their exclusive structures. In addition, the distinctive features of the marine solid matrix, requires novel process technology approaches. The high productivity of marine biomass makes it a renewable source of valuable components with potential for commercial applications.

  • Power Transformer Online Monitoring Using Electromagnetic Waves

    • 1st Edition
    • Gevork B. Gharehpetian + 1 more
    • English
    Power Transformer Online Monitoring using Electromagnetic Waves explores how to use electromagnetic wave technology and remote monitoring systems to predict and localize costly mechanical defects and partial discharge challenges in high voltage transformer windings. This innovative approach brings several potential benefits compared with conventional techniques such as frequency response analysis, including impermeability to ambient noise, and online implementation capability. This book reviews both fundamental and state-of-the-art information about all key aspects of condition monitoring using electromagnetic waves. It addresses the simulation of power transformers in CST environment while also explaining the theoretical background of boundary conditions used. Chapters review how to achieve practical online implementation, reliable diagnosis, asset management and remnant life estimation. Partial discharge detection is also discussed.　　

  • Iodine-Assisted Synthesis of Six- and Seven-Membered Heterocycles

    • 1st Edition
    • Navjeet Kaur
    • English
    Iodine-Assisted Synthesis of Six- and Seven-Membered Heterocycles covers both existing and the latest methods for the synthesis of various six- and seven-membered heterocycles using iodine. Covering an important and rapidly growing branch of heterocyclic chemistry, this book allows users easy access to the synthetic protocols for the synthesis of heterocycles, acting as a guide for how to make these important compounds employed as agrochemicals, pharmaceuticals, and veterinary products, using particular reagents. This book will be of interest to students, pharmacologists, biochemists, and organic and medicinal chemists.

  • Advances in Healthcare and Protective Textiles

    • 1st Edition
    • Shahid Ul Islam + 2 more
    • English
    Advances in Healthcare and Protective Textiles addresses technologies that have had a major impact in industry for decades, but which are currently attracting unprecedented attention due to their applications in the fight against the Coronavirus epidemic. Recent advances in textile technology have opened new possibilities for textile researchers and scientists in antiviral textiles, flame-retardant textiles, antimicrobial textiles, insect repellent textiles, breathable medical textiles, aroma-protective textiles, high tech-textiles, smart textiles, nano textiles, and more. This book provides systematic and comprehensive coverage of cutting-edge research and developments on material design, methodologies, characterizations, processes, properties and applications of medical healthcare and protective textiles. In addition, sections pay special attention to advanced fabrication methodologies and materials used in apparel engineering.

  • Handbook of Plasticizers

    • 4th Edition
    • George Wypych
    • English
    Handbook of Plasticizers, Fourth Edition provides a comprehensive review of the current literature as well as cutting-edge details on plasticizers obtained from renewable resources. The book specifies the typical properties of plasticizers belonging to one of thirty-one groups, including expected properties in a given group. The mechanisms of plasticizers, plasticization production steps, and their material behavior in plasticized systems are outlined, along with theoretical background to help readers understand practical observations and methods of material improvement. Other chapters cover the effects on the physical and mechanical properties of plasticized materials, their use in polymers, processing defects formation, and more. This is an essential professional reference, providing R&D scientists, production chemists, and engineers the information they need to avoid certain plasticizers in applications where they may cause health or material durability problems. In addition, the book shows readers how and where to use plasticizers more effectively.

  • Nanoremediation

    Modern Technologies for Treatment of Environmental Pollutants
    • 1st Edition
    • Nashaat N. Nassar + 1 more
    • English
    Nanoremediation: Modern Technologies for Treatment of Environmental Pollutants is a comprehensive reference that highlights established nano-remediation practices, discusses their rapidly emerging applications in industry, and points out future research directions. The book provides researchers and scientists in academia and industry with a high-tech start-up that will revolutionize modern remediation practices. It condenses all relevant information on nano-remediation and provides an amalgamation of the latest trends in the field. In addition, the book handles the design and modeling of nano-remediation processes and the trends and challenges that nano-remediation is facing in various sectors. Special attention is given to approaches that lead to green and sustainable industrial developments, as well as to the legal, economical and toxicity aspects of nano-remediation.

  • Handbook of Odors in Plastic Materials

    • 3rd Edition
    • George Wypych
    • English
    Handbook of Odors in Plastic Materials, Third Edition analyzes the reasons behind unwanted odor formation and outlines methods for prevention. This new edition contains a thorough review of the most recent data, achievements and information in this less known but very significant field of polymer modification. The book covers the fundamentals of odor formation and its transport within a material, the relationship between odor and toxicity, and various methods of odor removal and unwanted odor formation. Three chapters are devoted to the analysis of odor-related matters in different polymers, products and methods of processing. Dozens of polymers and product groups are analyzed, and the book also discusses regulations related to odor in products, effects of odor on health and safety, the effect of odors from plastic materials on indoor air quality, information on testing of odor changes, as well as a selection of raw materials for fog-free products.

  • Databook of Surface Modification Additives

    • 2nd Edition
    • George Wypych
    • English
    Databook of Surface Modification Additives, Second Edition contains data on 10 groups of additives, including anti-scratch and mar-preventing additives, additives for surface tension reduction and wetting, hydrophobization additives, gloss enhancement and surface matting additives, additives for formation of tack-free surface and tackifiers, and stain inhibiting additives. The information on each is divided into five sections, including General Information, Physical- chemical Properties, Health and Safety, Ecological Properties and Use and Performance. This data is provided for approximately 360 of the most important surface modification additives produced and used today. This databook will be an extremely useful resource for engineers, researchers and technicians interested in using additives to modify and improve the surface properties of materials.

  • Sulfur

    History, Technology, Applications and Industry
    • 3rd Edition
    • Gerald Kutney
    • English
    Sulfur: History, Technology, Applications and Industry, Third Edition focuses on methods of production and their applications during various stages of industrial and technological use. Commercial sulfuric acid production from the early 16th century until today is reviewed, spanning the Ancient and Renaissance periods, the Industrial Age (to which sulfur was vitally important), and the Sulfur War of 1840. The book introduces "the Sulfur Age" and the processes of this period- such as the Nordhausen, Bell, and Leblanc methods- then goes onto review native sulfur production in Sicily, once a major supplier to the world. The "Frasch method" is also covered in detail. Moving to present day, the book presents "recovered" sulfur derived from sour gas and oil which constitutes 90% of today’s elemental sulfur supply, and looks to Canada, a powerhouse supplier of recovered sulfur. An entire chapter is devoted to modern-day sulfur entrepreneurs, with a profile of various investors (from the reluctant to the private and institutional). Finally, the book forecasts the sulfur industry’s future and potential supply sources, such as worldwide oil sands.

  • Emerging Nanotechnologies for Medical Applications

    • 1st Edition
    • Nabeel Ahmad + 1 more
    • English
    Emerging Nanotechnologies for Medical Applications focuses on both commercial and premarket tools and their applications in medicine. The book develops the concept of integrating different technologies along a hierarchical structure of biological systems and clarifies biomechanical interactions on different levels for the analysis of multiscale pathophysiological phenomena. With a focus on nano-scale processes and biomedical applications, it demonstrates how knowledge can be utilized in a range of areas, including the diagnosis and treatment of various human diseases, and in alternative energy production. This book is an important reference source for scientists and researchers involved in micro- and nano-engineering, bio-nanotechnology, biomedical engineering, nanomedicine, and industries involved with optical devices, computer simulation and pharmaceuticals.

  • Functional Fillers

    Chemical Composition, Morphology, Performance, Applications
    • 2nd Edition
    • George Wypych
    • English
    Functional Fillers: Chemical Composition, Morphology, Performance, Applications, Second Edition covers the structure, physical properties, electrical and magnetic properties, and applications of fillers. The book includes two sections, with the first part covering classic fillers, analyzing the current modifications in relation to composition and morphology, and enabling enhancements in properties and applications. The second part presents the new generation of fillers, which provide designers with exceptional properties not previously available. Applications discussed include lubricants, anti-corrosion, antimicrobial, and more. Renewable fillers and recycling of fillers are covered as well.

  • Handbook of Surface Improvement and Modification

    • 2nd Edition
    • George Wypych
    • English
    Handbook of Surface Improvement and Modification, Second Edition covers additives and the modification processes that determine the surface properties of many materials. These additives can modify or improve scratch and mar resistance, improve gloss or flatten the surface, increase or decrease tack and inhibit staining. Mechanisms of damage, protection and property improvements are also discussed, making this an essential handbook for engineers, researchers and technicians interested in using additives to modify and improve the surface properties of materials. A companion book, Databook of Surface Modification and Additives, is also available with more information on the additives commercially available to improve materials.

  • Handbook of Adhesion Promoters

    • 2nd Edition
    • George Wypych
    • English
    Handbook of Adhesion Promoters, Second Edition outlines known mechanisms, principles of use, and the applications of different groups of adhesion promoters, along with a discussion of the mechanisms that cause adhesion loss, such as corrosion, delamination, detachment, liquid penetration and peeling. Surface condition and treatment are also discussed, including different methods (cleaning, mechanical, plasma, microwave, flame, corona discharge, laser, UV, and chemical modification) for practical applications. Formulation of typical primers used in the application of adhesives, sealants, coatings, coil coatings, cosmetics, metal, optical devices, polymers and plastics are covered, with over 50 primer formulations provided. In addition, a full chapter is dedicated to the subject of polymer modification for improved adhesion, a method frequently used instead of the addition of adhesion promoters. The book's final chapters contain information on available evaluation and selection of adhesion promoters that work with different polymers (29), products (28), and those that help to prevent corrosion.

  • Handbook of Polymer Processing Additives

    • 1st Edition
    • George Wypych
    • English
    Handbook of Polymer Processing Additives provides insights on the selection of additives, their performance mechanisms, essential application properties, and a complete analysis of related literature and patents. Acid scavengers, air release, anticaking, antigassing, anti-gelling, anti-settling, hydrolysis stabilizers, and moisture scavengers are each covered. Information on the use of additives in various products is divided into sections on types, concentrations, usage, advantages and disadvantages, effects on product properties, and examples of formulation. Processing methods are similarly divided into sections on types and concentrations, effects on the process, effect on product properties, advantages and disadvantages, and examples of formulation. All essential aspects of chemistry, physical properties, influence on properties of final products, formulations, methods of incorporation, analysis and effects on health and environment are considered. The book is an excellent companion to the Databook of Polymer Processing Additives.

  • Advances in Heterocyclic Chemistry

    • 1st Edition
    • Volume 139
    • Eric F.V. Scriven + 1 more
    • English
    Advances in Heterocyclic Chemistry, Volume 139, the latest release in this definitive series on the field of heterocyclic chemistry, combines descriptive synthetic chemistry and mechanistic insights to yield an understanding on how chemistry drives the preparation and useful properties of heterocyclic compounds. Topics in this new release include Application of the Fischer indole synthesis in medicinal chemistry, Oxindole Synthesis via C-H Activation Methods, Ring-Closing Metathesis in the Synthesis of Fused Indole Structures, Synthesis of fuller heterocycles, The Literature of Heterocyclic Chemistry, Part XX, 2020, and Heterocyclic Zwitterions Based on Coupled Polymethines.

  • Green Sustainable Process for Chemical and Environmental Engineering and Science

    Biomedical Applications of Green Composites
    • 1st Edition
    • Tariq Altalhi + 1 more
    • English
    Biomedical Applications of Green Composites reviews the use of green composite materials in drug delivery, with a focus on capsules, resins and ceramides in biomedical fields. Chapters present green composites of polymeric origin and targeted delivery of drugs into various parts of the human body. Other sections in the book cover topics related to the applications of green composites in areas such as antimicrobial agents, pathogen control, surgical applications, dentistry and cancer therapy.

  • Intelligent Edge Computing for Cyber Physical Applications

    • 1st Edition
    • D. Jude Hemanth + 3 more
    • English
    Intelligent Edge Computing for Cyber Physical Applications introduces state-of-the-art research methodologies, tools and techniques, challenges, and solutions with further research opportunities in the area of edge-based cyber-physical systems. The book presents a comprehensive review of recent literature and analysis of different techniques for building edge-based CPS. In addition, it describes how edge-based CPS can be built to seamlessly interact with physical machines for optimal performance, covering various aspects of edge computing architectures for dynamic resource provisioning, mobile edge computing, energy saving scenarios, and different security issues. Sections feature practical use cases of edge-computing which will help readers understand the workings of edge-based systems in detail, taking into account the need to present intellectual challenges while appealing to a broad readership, including academic researchers, practicing engineers and managers, and graduate students.

  • Hamiltonian Monte Carlo Methods in Machine Learning

    • 1st Edition
    • Tshilidzi Marwala + 2 more
    • English
    Hamiltonian Monte Carlo Methods in Machine Learning introduces methods for optimal tuning of HMC parameters, along with an introduction of Shadow and Non-canonical HMC methods with improvements and speedup. Lastly, the authors address the critical issues of variance reduction for parameter estimates of numerous HMC based samplers. The book offers a comprehensive introduction to Hamiltonian Monte Carlo methods and provides a cutting-edge exposition of the current pathologies of HMC-based methods in both tuning, scaling and sampling complex real-world posteriors. These are mainly in the scaling of inference (e.g., Deep Neural Networks), tuning of performance-sensitiv... sampling parameters and high sample autocorrelation. Other sections provide numerous solutions to potential pitfalls, presenting advanced HMC methods with applications in renewable energy, finance and image classification for biomedical applications. Readers will get acquainted with both HMC sampling theory and algorithm implementation.

  • Resonance

    Long-Lived Waves
    • 1st Edition
    • Leonard Dobrzyński + 2 more
    • English
    Resonance: Long-Lived Waves, a volume in the Interface Transmission Tutorial Book series, introduces long-life resonance properties for telecommunications. The book's authors review the general analysis methods of interface transmission, giving many examples and applying these methods to telecommunications systems (materials and devices). Each chapter introduces and defines the long-lived resonances, their path states and phase shifts, and applications.This book is suitable for materials scientists and engineers in academia and R&D, and may also be appropriate for applied physicists.

  • Databook of Polymer Processing Additives

    • 1st Edition
    • Anna Wypych
    • English
    Databook of Polymer Processing Additives provides key information on the properties of polymer processing additives, covering their general information, physical properties, health and safety considerations, ecological properties, and use and performance details. Acid scavengers, air release, anticaking, antigassing, anti-gelling, anti-settling, hydrolysis stabilizers, moisture scavengers, and more are all covered, providing readers with key data aiding in the proper selection of these additives. The book is an excellent companion to the Handbook of Polymer Processing Additives.

  • Physics and Ecology in Fluids

    Modeling and Numerical Experiments
    • 1st Edition
    • Marek Stastna + 1 more
    • English
    Physics and Ecology in Fluids: Modeling and Numerical Experiments develops mathematical and numerical modeling methodologies for coupled biological-hydrodyna... problems with a focus on process studies. The modeling is presented in a way that discusses mathematical background but does not depend on a large body of mathematical pre-requisites or experience. Models are built up from simple, to complex. This includes discussion of approximations and shortcuts commonly made by large computational models for natural bodies of water. Computational approaches are presented using conceptual explanations and pseudo-code along with well-documented, open-source code. Over a dozen codes that run locally on the reader’s laptop provide hands on experience with various aspects of the modeling process and its scientific results. One large-scale code for basin scale modeling based on the Discontinuous Galerkin methodology is presented, along with a self-contained discussion of theoretical background and implementation details. Physics and Ecology in Fluids is written for graduate students, academic researchers and government scientists. Professors can use the book as a stand-alone resource for a one term graduate course, or to supplement teaching of their own graduate courses. All readers may also use the book as background/user’s guide for the software included with the book.

  • Databook of Plasticizers

    • 3rd Edition
    • Anna Wypych
    • English
    Databook of Plasticizers, Third Edition contains data on more than 300 of the most important generic and commercial plasticizers in use today. The data comes from a range of sources beyond plasticizers manufacturers, allowing for a detailed comparison of properties of different plasticizers. Over 100 different data fields are provided, from general information, such as molecular structure and formula, to physical properties, health and safety information, ecological properties, and recommendations regarding appropriate use and performance of each plasticizer. This data book is an essential resource for engineers, technicians and materials scientists responsible for specifying a plasticizer. The book has been updated to reflect the recent changes in plasticizer approvals for production of various materials, including chloroparaffins, refined oil derivatives, and phalates, and also includes data details on a range of new plasticizers that have recently gained market approval. It serves as an ideal companion to the Handbook of Plasticizers.

  • Databook of Adhesion Promoters

    • 2nd Edition
    • Anna Wypych
    • English
    Databook of Adhesion Promoters, Second Edition contains data on the most important adhesion promoter products in use today. Information on each adhesion promoter is divided into five sections: General Information, Physical Properties, Health and Safety, Ecological Properties, and Use and Performance. The previous edition of this book was mostly related to silanes, but many new additives have been introduced to the market, many not based on silanes but on one of 37 chemical groups of chemical compounds needed for a variety of products in which silanes do not function, are too expensive, or better performance can be achieved with these new additives. The years that have passed since publication of the first edition have also had a significant impact on sourcing and selection of adhesion promoters for different tasks. Due to mergers and acquisitions, many additives are no longer in use. Because of scientific developments, more products are based on renewable resources and selected from less toxic origins. There is also a clear tendency to limit the scope of application which can lead to many products being designed for specialized, frequently single product applications.

  • Comprehensive Metaheuristics

    Algorithms and Applications
    • 1st Edition
    • Ali Mirjalili + 1 more
    • English
    Comprehensive Metaheuristics: Algorithms and Applications presents the foundational underpinnings of metaheuristics and a broad scope of algorithms and real-world applications across a variety of research fields. The book starts with fundamentals, mathematical prerequisites, and conceptual approaches to provide readers with a solid foundation. After presenting multi-objective optimization, constrained optimization, and problem formation for metaheuristics, world-renowned authors give readers in-depth understanding of the full spectrum of algorithms and techniques. Scientists, researchers, academicians, and practitioners who are interested in optimizing a process or procedure to achieve a goal will benefit from the case studies of real-world applications from different domains. The book takes a much-needed holistic approach, putting the most widely used metaheuristic algorithms together with an in-depth treatise on multi-disciplinary applications of metaheuristics. Each algorithm is thoroughly analyzed to observe its behavior, providing a detailed tutorial on how to solve problems using metaheuristics. New case studies and research problem statements are also discussed, which will help researchers in their application of the concepts.

  • Functional and Technical Textiles

    • 1st Edition
    • Subhankar Maity + 2 more
    • English
    Functional and Technical Textiles covers recent advances in technology, properties and performance of high-tech yarns and structures and their applications in different sectors of the smart and technical textile fields. Applications, including many that go beyond apparel, where high tech and functional structural fabrics are used as reinforcements for composites, medical implants and geotextiles are covered. The book also describes the latest technologies for producing versatile products for these diversified applications. Finally, the book makes a survey of the latest research in technical textiles and its various structures, properties and applications in composites, medical textiles, geotextiles, industrial textiles, and more.

  • Adapting the Built Environment for Climate Change

    Design Principles for Climate Emergencies
    • 1st Edition
    • Fernando Pacheco-Torgal + 1 more
    • English
    Adapting the Built Environment for Climate Change: Design Principles for Climate Emergencies analyzes several scenarios and proposes various adaptation strategies for climate emergencies (heat waves, wildfires, floods, and storms). Divided into three themes, the book offers an organized vision of a complex and multi-factor challenge. It covers climatic resilience and building refurbishment, implications for service life prediction and maintainability, and climate adaptation in the maintenance and management of buildings. Sections cover infrastructure materials, climate emergency adaptation and building adaptation to heat waves, wildfires, floods and storms. The book will be an essential reference resource for civil and structural engineers, architects, planners, designers and other professionals who have an interest in the adaptation of the built environment against climate change.

  • Extruder Processing

    Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing
    • 1st Edition
    • Paul G. Andersen + 1 more
    • English
    Single-screw or twin-screw extruder? When the need to produce a homogenous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device. However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that will aid the practitioner in comparing these two types of extrusion equipment relative to process requirements, and taking optimal decisions.

  • Fabrication and Functionalization of Advanced Tubular Nanofibers and their Applications

    • 1st Edition
    • Baoliang Zhang + 1 more
    • English
    Fabrication and Functionalization of Advanced Tubular Nanofibers and their Applications describes the synthesis, preparation and characterization of carbon-based tubular nanofibers and their applications in environmental protection and new energy sources. The book explores novel strategies for the preparation of carbon tubular nanofibers and explains how they have been used to great effect in a range of applications, including energy and healthcare. The processing-structure... relationship in functional inorganic/organic materials is examined at the nano-level, explaining where interesting electronic, magnetic, optical, mechanical or catalytic and therapeutic properties are derived. Covering everything from the basics to their use in practice, including the synthetic procedure and characterization, this book is the perfect guide for anyone interested in the design of nanomaterials for advanced applications. Nanomaterial science is a relatively young and rapidly developing discipline that includes aspects of physics, chemistry and biology and is finding applications in some of mankind’s greatest current challenges.

  • Boiling Water Reactors

    • 1st Edition
    • Koji Nishida + 3 more
    • English
    Boiling Water Reactors, Volume Four in the JSME Series on Thermal and Nuclear Power Generation compiles the latest research in this very comprehensive reference that begins with an analysis of the history of BWR development and then moves through BWR plant design and innovations. The reader is guided through considerations for all BWR plant features and systems, including reactor internals, safety systems and plant instrumentation and control. Thermal-hydraulic aspects within a BWR core are analyzed alongside fuel analysis before comparisons of the latest BWR plant life management and maintenance technologies to promote safety and radiation protection practices are covered. The book's authors combine their in-depth knowledge and depth of experience in the field to analyze innovations and Next Generation BWRs, considering prospects for a variety of different BWRs, such as High-Conversion-BWRs... TRU-Burner Reactors and Economic Simplified BWRs.

  • Current Trends and Future Developments on (Bio-) Membranes

    Membrane Technologies in Environmental Protection and Public Health: Challenges and Opportunities
    • 1st Edition
    • Angelo Basile + 3 more
    • English
    Current Trends and Future Developments on (Bio-) Membranes: Membrane Technologies in Environmental Protection and Public Health- Challenges and Opportunities illustrates the application of membrane technology used in separation processes, along with the advantages of membranes in comparison with other types of separation methods. In addition, the book illustrates new approaches for pollution monitoring and helps researchers develop new membrane systems for air or water pollution monitoring. Sections focus on the application of membrane technology to new membranes, hence it is ideal for R&D managers in industry and a variety of others, including academic researchers and postgraduate students working in strategic treatment, separation and purification processes.

  • The Alkaloids

    • 1st Edition
    • Volume 89
    • Hans-Joachim Knolker
    • English
    The Alkaloids, Volume 89, the newest release in a series that has covered the topic for more than 60 years, discusses key aspects of alkaloid chemistry, biology and pharmacology. Sections in this release include chapters on Recent Progress in the Chemistry of Naphthylisoquinoline Alkaloids, The Biological Activities of Quinolizidine Alkaloids, and C NMR Spectral Data and Pharmacological Activities of Aporphine Alkaloids.

  • Nanocomposites-Advanced Materials for Energy and Environmental Aspects

    • 1st Edition
    • Mohammad Ehtisham Khan + 2 more
    • English
    Nanocomposites-Advan... Materials for Energy and Environmental Aspects provides a brief introduction to metal oxides. The book then discusses novel fabrication methodologies and eco-friendly methods for using a broad range of metal oxide-based nanocomposites in innovative ways. Key aspects include fundamental characteristics of environmentally sustainable fabrication of materials for solar power, power generation and the textiles industries. Commercialization and economic aspects that are currently of major significance are also discussed in detail. The book represents an important information resource for material scientists and engineers to create the next generation of products and devices for energy and environmental applications. Metal and metal oxide-based nanocomposites are at the heart of some of the most exciting developments in the field of energy and environmental research. They have exceptional properties and are utilized in electronic and environmental sensing devices, for energy storage, electrode materials, fuel cells, membranes, and more.

Related subjects