Skip to main content
Elsevier

Books in Physics

Physics titles offer comprehensive research and advancements across the fundamental and applied areas of physical science. From quantum mechanics and particle physics to astrophysics and materials science, these titles drive innovation and deepen understanding of the principles governing the universe. Essential for researchers, educators, and students, this collection supports scientific progress and practical applications across a diverse range of physics disciplines.

  • Microweighing in Vacuum and Controlled Environments

    • 1st Edition
    • Volume 4
    • A.W. Czanderna + 1 more
    • English
    Methods and Phenomena, 4: Their Applications in Science and Technology: Microweighing in Vacuum and Controlled Environments focuses on the principles, methodologies, and approaches involved in micro mass measurements. The selection first elaborates on introduction and microbalance review, beam microbalance design, construction and operation, and sources of error in microweighing in controlled environments. Discussions focus on Brownian motion, Knudsen forces, gravitational forces, microbalance construction and operation, auxiliary equipment for operation of a vacuum microbalance, undesirable disturbances or forces, calibration techniques, and classification of various types of microbalances. The text then takes a look at physical adsorption studies and chemisorption studies with the vacuum microbalance, simultaneous microgravimetric and residual gas analyzer measurements, and simultaneous measurement of mass change and infrared spectra. Topics include chemisorption results obtained on other solids and silver powders, probing the surface phase, quantitative information from adsorption and desorption, measuring techniques, and examples of physisorption measurements and their evaluation. The manuscript examines unusual applications of the vacuum microbalance and high temperature reaction studies, as well as empirical and theoretical rate laws, permeation of water vapor through plastic membranes, and measurement of permittivity and dielectric loss factor. The selection is a valuable source of data for researchers wanting to explore microweighing in vacuum and controlled environments.

  • Inversion Methods in Atmospheric Remote Sounding

    • 1st Edition
    • Adarsh Deepak
    • English
    Inversion Methods in Atmospheric Remote Sounding contains the technical proceedings of the First International Interactive Workshop on Inversion Methods in Atmospheric Remote Sounding, held in Williamsburg, Virginia, on December 15-17, 1976. The papers review the state of the art in inversion methods used in retrieving information about the atmosphere from remotely sensed data. The mathematical theory of inversion methods is described, together with the application of these methods to the remote sounding of atmospheric temperature, relative humidity, and gaseous and aerosol constituents. Comprised of 21 chapters, this book begins with an introduction to methods for solving problems in radiative transfer and multiple scattering, followed by a discussion on the problem of radiative transfer in a scattering plane-parallel atmosphere. The next section is devoted to the mathematical theory of inversion methods and considers some aspects of the inversion problem in remote sensing, along with the relaxation method for the inverse solution of nonlinear and linear transfer equations. The final section explores inversion methods in gaseous, thermal, and aerosol atmospheres, covering topics such as the Backus-Gilbert theory and its application to retrieval of ozone and temperature profiles; inversion of scattered radiance horizon profiles for gaseous concentrations and aerosol parameters; and inversion of passive microwave remote sensing data from satellites. This monograph will be of interest to scientists from universities, government agencies, and research laboratories.

  • Path Integrals and Quantum Processes

    • 1st Edition
    • Mark S. Swanson
    • English
    In a clearly written and systematic presentation, Path Integrals and Quantum Processes covers all concepts necessary to understand the path integral approach to calculating transition elements, partition functions, and source functionals. The book, which assumes only a familiarity with quantum mechanics, is ideal for use as a supplemental textbook in quantum mechanics and quantum field theory courses. Graduate and post-graduate students who are unfamiliar with the path integral will also benefit from this contemporary text. Exercise sets are interspersed throughout the text to facilitate self-study.

  • Synthesis, Crystal Growth and Characterization

    • 1st Edition
    • K. Lal
    • English
    Synthesis, Crystal Growth and Characterization presents the proceedings of the International School on Synthesis, Crystal Growth and Characterization of Materials for Energy Conversion and Storage, held on October 12-23, 1981, at the National Physical Laboratory in New Delhi, India. The book consists of lectures by distinguished scientists from around the world who tackle different aspects of synthesis, crystal growth, characterization of materials, energy conversion, and energy storage. Organized into four parts encompassing 26 chapters, the book begins with an overview of the synthesis of materials at high temperatures and pressures before turning to a discussion of how macrocrystalline and amorphous silicon is prepared. It then looks at fundamental principles underlying the process of crystal growth, both from the vapor phase and from melt, and methodically introduces the reader to the different techniques used to characterize materials, including neutron scattering and electron transport. The next chapters focus on point defects and aggregates that influence the critical electronic properties of semiconducting materials, X-ray diffraction studies of strains and stresses in thin films used in solid-state devices, and electron spectroscopic studies of solid surfaces. The book also considers the role of physics in microelectronics and vice versa, fast ion transport in solids, and the concept of Syadvada in relation to modern physics. This volume is a valuable resource for participants of the International School on Synthesis, Crystal Growth and Characterization of Materials for Energy Conversion and Storage, as well as active researchers working in areas related to the field.

  • Solutions In Action

    • 1st Edition
    • Karl Lanngren
    • English
    Solitons in Action is a collection of papers that discusses the concept of a wave packer or pulse known as a soliton. One paper reviews the development of the solitary wave concept, with emphasis on the difference between a solitary wave and a soliton. The Korteweg-deVries (KdV) equation shows the interactions between infinite sets of conservation laws and the inverse scattering transform method. The Backlund transform technique produces hierarchies of multisoliton solutions for nonlinear wave equations. The Gel-'fand-Levitan algorithm can effect an inverse scattering calculation that relates changes in the scattering data to changes in the solution of corresponding wave equation. One paper points out that concepts in differential geometry can show the fundamental nature of soliton behavior and the relationship between inverse scattering and the Backlund transformation. Solitons in action can be viewed as magnetic flux propagates through a gap (between two closely-spaced superconductors) in quantum units. This view results in a simplified procedure for perturbation expansions around multisoliton solutions. This collection can prove useful for researchers involved in the study of fluid mechanics, of pure and applied sciences, of mathematical sciences, and of wave theory.

  • Backscattering Spectrometry

    • 1st Edition
    • Wei-Kan Chu
    • English
    Backscattering Spectrometry reviews developments in backscattering spectrometry and covers topics ranging from instrumentation and experimental techniques to beam parameters and energy loss measurements. Backscattering spectrometry of thin films is also considered, and examples of backscattering analysis are given. This book is comprised of 10 chapters and begins with an introduction to backscattering spectrometry, what it can and what it cannot accomplish, and some ""rules of thumb"" for interpreting or reading spectra. The relative strengths and weaknesses of backscattering spectrometry in the framework of materials analysis are outlined. The following chapters focus on kinematics, scattering cross sections, energy loss, and energy straggling; backscattering analysis of thin films of various degrees of complications; the influence of beam parameters; and mass and depth resolutions and their relationships to the mass and energy of projectiles. Many examples of backscattering analysis are also presented to illustrate the capability and limitation of backscattering. Backscattering applications when combined with channeling effects are considered as well. The final chapter provides a list of references on the applications of backscattering spectrometry. This monograph will be a useful resource for physicists.

  • Semiclassical Descriptions of Atomic and Nuclear Collisions

    • 1st Edition
    • J. Bang + 1 more
    • English
    These proceedings contain the invited papers, both theoreticaland experimental presented at this symposium, the first of 3 heldin Copenhagen to honour Niels Bohr's hundredth birthday.

  • Vibrational Properties of Solids

    • 1st Edition
    • Gideon Gilat
    • English
    Methods in Computational Physics, Volume 15: Vibrational Properties of Solids explores the application of computational methods to delineate microscopic vibrational behavior. This book is composed of nine chapters that further illustrate the utility of these methods to ordered lattices, quantum solids, impurity modes, surface modes, and amorphous solids. The opening chapters present the basic theoretical models and their computational aspects for different solids of diverse chemical nature, together with some methods of automation and computation in the highly sophisticated experiments in inelastic scattering of neutrons. These topics are followed by a discussion on how group theoretical methods treated by computers can yield the proper symmetry assignments of phonon eigenvalues and eigenstates. Considerable chapters are devoted to the different applications of traditional lattice dynamics, each having its own computational ramification. Other chapters survey the properties of solids that mostly involve integrations over the Brillouin zone. The last chapter concerns the dynamic or time-dependent aspect of lattice dynamics, namely, the calculation of thermal and electric conductivities in some models of solids. This book is of great benefit to geoscientists, physicists, and mathematicians.

  • Metallurgical Coatings and Thin Films 1992

    • 1st Edition
    • G.E. McGuire + 2 more
    • English
    One of the increasingly important requirements for high technology materials is that they possess near-surface properties different to their bulk properties. Specific surface properties are generally achieved through the use of these films or coatings or by modifying the structure or composition of the near surface. This two-volume work contains 157 papers covering a wide range of topics involving films, coatings, and modified surfaces. All aspects of the development of deposition technologies are addressed including basic research, applied research, applications development and full scale industrial production. The work will be of interest to materials scientists, physicists, electronic, chemical and mechanical engineers, and chemists.

  • Direct nuclear Reactions

    • 1st Edition
    • Norman Glendenning
    • English
    Direct Nuclear Reactions deals with the theory of direct nuclear reactions, their microscopic aspects, and their effect on the motions of the individual nucleons. The principal results of the theory are described, with emphasis on the approximations involved to understand how well the theory can be expected to hold under specific experimental conditions. Applications to the analysis of experiments are also considered. This book consists of 19 chapters and begins by explaining the difference between direct and compound nuclear reactions. The reader is then introduced to the theory of plane waves, some results of scattering theory, and the phenomenological optical potential. The following chapters focus on form factors and their nuclear structure content; the basis of the optical potential as an effective interaction; reactions such as inelastic single- and two-nucleon transfer reactions; the effect of nuclear correlations; and the role of multiple-step reactions. The theory of inelastic scattering and the relationship between the effective and free interactions are also discussed, along with reactions between heavy ions and the polarizability of nuclear wave functions during a heavy-ion reaction. This monograph will be of interest to nuclear physicists.

  • Physical Acoustics V8

    Principles and Methods
    • 1st Edition
    • Warren P. Mason
    • English
    Physical Acoustics: Principles and Methods, Volume VIII discusses a number of themes on physical acoustics that are divided into seven chapters. Chapter 1 describes the principles and applications of a tool for investigating phonons in dielectric crystals, the spin phonon spectrometer. The next chapter discusses the use of ultrasound in investigating Landau quantum oscillations in the presence of a magnetic field and their relation to the strain dependence of the Fermi surface of metals. The third chapter focuses on the ultrasonic measurements that are made by pulsing methods with velocities obtained through phase comparison methods and attenuations obtained through comparing pulse heights for successive reflections. In Chapter 4, methods for measuring the properties of solids and liquids at very high pressures are described. Chapter 5 explores some of the relationships between the thermal equilibrium properties of solids and mechanical properties such as the second- and third-order elastic constants. The sixth chapter discusses the interaction of sound waves with thermal phonons in dielectric crystals and emphasizes the relationship between the various theories proposed and the effect of phonon interactions on the velocity of sound. The last chapter describes the applications to metals and rock mechanics of internal friction at low frequencies due to dislocations. This book is beneficial to students and physicists conducting work on physical acoustics.

  • Applications of Liquid Scintillation Counting

    • 1st Edition
    • Donald Horrocks
    • English
    Applications of Liquid Scintillation Counting deals with liquid scintillation counting and its applications in fields such as the biosciences, medicine, environmental and space sciences, chemistry, and physics. These applications include dual-labeled counting; Cerenkov counting; radioimmunoassay, chemiluminescence and bioluminescence; pulse shape discrimination; flow cell counting; and large-volume counters. This book is comprised of 18 chapters and begins with a historical overview of the liquid scintillation method, the first liquid scintillation counters, and early scintillator solutes. The following chapters focus on the theory of liquid scintillation counting; the components of the liquid scintillator solution; and the development of the liquid scintillation counter and multiplier phototubes. The discussion then turns to the detection and measurement of different types of particles produced by radionuclides using liquid scintillation techniques; the techniques and problems of sample preparations (homogeneous and heterogeneous); oxidation techniques; and importance and difference of several types of counting vials. The sources of quenching in counting samples and methods of monitoring and correction for variable quench within samples are also considered. Several special applications of liquid scintillation techniques are presented, including dual-labeled counting, radioimmunoassay, and flow cell counting. In conclusion, the statistical considerations involved in determining the reliability and accuracy of data obtained by nuclear counting techniques are highlighted. This monograph will serve as a reliable source of information for those who are already using or starting to use liquid scintillation counting techniques.

  • Thermophysics and Temperature Control of Spacecraft and Entry Vehicles

    • 1st Edition
    • Gerhard Heller
    • English
    Progress in Astronautics and Aeronautics, Volume 18: Thermophysics and Temperature Control of Spacecraft and Entry Vehicles is a selection of technical papers based on two American Institute of Aeronautics and Astronautics meetings, namely, The Thermophysics Specialist Conference, held in Monterey, California on September 13-15, 1965 and the Third Aerospace Sciences Conference, held in New York on January 1966. This book covers the most important problems of thermophysical research and technology. This volume is composed of six parts encompassing 42 chapters. Part I contains papers on the thermal radiation properties of solids, including measuring techniques for solar reflectance and infrared emittance determination, and a paper on radiative transfer. Part II deals with the lunar and planetary thermal environment and includes research papers on emissivities, reflectivities, and polarization by planetary atmospheres and planetary surfaces. Part III discusses the effects of the space environment on the optical properties of thermal control surfaces. This part also presents results of flight experiments with sensors of environmental effects and flight experience with thermal coatings of satellites. Part IV covers the thermophysical measurements of ablative materials and with the char layers formed during the actual vehicle entry period or during laboratory simulation tests. Part V looks into the two comparatively areas of thermophysics, namely, the thermal similitude (thermal modeling) and interface resistance of joints under space conditions. Part VI summarizes the practical experience in thermal design gained on spacecraft flights. Thermophysicists, space engineers and designers, and research workers who are interested in thermophysical technology will find this book invaluable.

  • Lectures on The Many-Body Problems V2

    • 1st Edition
    • E.R. Caianiello
    • English
    Lectures on the Many-Body Problem is a compilation of papers delivered at the Fifth International School of Physics, held at Ravello, Italy in April 1963. The book is devoted to the techniques of many-body theory, which are used in finding solutions to difficult problems encountered in solid-state physics. The text discusses such topics as the discontinuities in the drift velocity of ions in liquid helium; density fluctuation excitations in many-particle systems; tunneling from a many-particle point of view; the mathematics of second quantization for systems of fermions; and correlation functions and macroscopic equations. Theoretical physicists will find the monograph invaluable.

  • Solar and Terrestrial Radiation

    Methods and Measurements
    • 1st Edition
    • Kinsell Coulson
    • English
    Solar and Terrestrial Radiation: Methods and Measurements basically summarizes instruments used in routine measurements of solar and terrestrial radiation at the earth’s surface. Because of developments in this field, these certain instruments are sufficiently relevant for meteorological and climatological purposes. Although the emphasis of the book is on the radiation instrumentation, basic theory is still covered and discussed for the purpose of understanding basic radiative processes in the atmosphere. The featured instruments in this book show that if used properly, these instruments can eliminate certain deficiencies in climatological data and routine monitoring of the radiative regime of the surface and lower atmosphere. However, the scope of the study is limited in which they cannot be of use in terms of being precise in studies of climatic change, spectral distribution of atmospheric radiation, and other specific meteorological and technological requirements. This book is designed to be of valuable use to meteorologists, climatologists, and physicists. Students, specifically graduate students, can also make use of the book as well.

  • Relaxation in Magnetic Resonance

    Dielectric and Mossbauer Applications
    • 1st Edition
    • Charles P. Jr. Poole
    • English
    Relaxation in Magnetic Resonance contains a series of lecture notes for a special topics course at the University of South Carolina in 1967. This book contains 21 chapters that summarize the main theoretical formulations and experimental results of magnetic resonance relaxation phenomena in several physical systems. This text deals first with the various methods in determining the relaxation behavior of the macroscopic spin system, such as Bloch equations, saturation methods, and transient resonant absorption. The subsequent chapters discuss the homogeneous and inhomogeneous resonant lines in solids and liquids and the significance of the Kubo-Tomita and Redfield theories in magnetic resonance. This book then considers the background research on electron spin resonance and relaxation in ionic solids. The concluding chapters explore the acoustic absorption coefficient and dielectric constant calculation; the relaxation processes in paramagnetic substance; and the characteristics of Mössbauer spectra and their application in magnetic relaxation. This book will be useful to both graduate students embarking upon thesis problems in relaxation and more advanced workers who seek an overall summary of the status of the field, as well as to physicists and chemists.

  • Kinetics of Aggregation and Gelation

    • 1st Edition
    • F. Family + 1 more
    • English
    Kinetics of Aggregation and Gelation presents the proceedings of the International Topical Conference on Kinetics of Aggregation and Gelation held on April 2-4, 1984 in Athens, Georgia. The purpose of the conference was to bring together international experts from a wide variety of backgrounds who are studying phenomena inherently similar to the formation of large clusters by the union of many separate, small elements, to present and exchange ideas on new theories and results of experimental and computer simulations. This book is divided into 57 chapters, each of which represents an oral presentation that is part of a unified whole. The book begins with a presentation on fractal concepts in aggregation and gelation, followed by presentations on topics such as aggregative fractals called ""squigs""; multi-particle fractal aggregation; theory of fractal growth processes; self-similar structures; and interface dynamics. Other chapters cover addition polymerization and related models; the kinetic gelation model; a new model of linear polymers; red cell aggregation kinetics; the Potts Model; aggregation of colloidal silica; the ballistic model of aggregation; stochastic dynamics simulation of particle aggregation; particle-cluster aggregation; kinetic clustering of clusters; computer simulations of domain growth; and perspectives in the kinetics of aggregation and gelation. This book will be of interest to practitioners in the fields of chemistry, theoretical physics, and materials engineering.

  • Physical and Applied Acoustics

    An Introduction
    • 1st Edition
    • Erwin Meyer
    • English
    Physical and Applied Acoustics: An Introduction explores the mechanical-acoustica... or acoustical-electrica... analogies that are based on common theoretical relationships. This book is composed of 11 chapters that discuss the theory, experiment, and technological applications of physical and applied acoustics. The introductory chapters deal with the sound wave propagation in liquids and gases, as well as the statistical theory of room acoustics. These topics are followed by discussions on sound absorption in different medium; the concept of sound radiation pressure; directional characteristics of sound sources; measurement and calibration of acoustics; and the fundamental physical and psychological facts of acoustics. The subsequent chapters cover the use of electroacoustics for the transmission of speech and music. A chapter examines the production and detection of extremely high-frequency sound, called quantum acoustics. The concluding chapter highlights the interaction phenomena between sound and flow in a medium.

  • Electron Beams, Lenses, and Optics

    • 1st Edition
    • A El-Kareh
    • English
    Electron Beams, Lenses, and Optics, Volume I deals with the physics of electron beams, lenses, and optics and covers topics ranging from the paraxial ray in symmetrical electric fields to the analytical determination of electrostatic fields. The general properties of electrostatic lenses and the electrostatic immersion lens are also considered. Each equation except one is derived from first principles. To emphasize the physics of the discussions, elementary mathematics is used as much as possible. Comprised of eight chapters, this volume begins with an introduction to the laws that govern electron beams and light rays, including Snell's law. Some fundamental limitations to the analogy between electron optics and light optics are evaluated, together with electron rays in plane symmetrical and in rotationally symmetrical fields. Subsequent chapters explore the general properties of electrostatic lenses and electrostatic immersion lenses; electrostatic unipotential lenses; and formation of optical images by rotationally symmetrical magnetic fields. The final chapter is devoted to the symmetrical magnetic lens and its magnetic scalar potential, paying particular attention to the flux density along the z axis and factors to consider in the design of the pole pieces. This book will be of interest to students, practitioners, and researchers in physics.

  • Stratified Flows

    • 1st Edition
    • Chia-Shun Yih
    • English
    Stratified Flows is the second edition of the book Dynamics of Nonhomogenous Fluids. This book discusses the flow of a fluid of variable density or entropy in a gravitational field. In this edition, corrections have been made; unnecessary parts have been omitted; and new sections as well as notes on results related to the subject have been added. This book includes a general discussion of the effects of density or entropy and the structure of stratified flows; waves of small amplitude; the Eigenvalue problem; dependence of phase velocity on wavelength; wave motion; steady flows of finite amplitude; and types of solutions for steady flows. This edition also covers other topics such as hydrodynamic stability; flows in porous media; and the analogy between gravitational and electromagnetic forces. This text is recommended for those in the field of physics who would like to be familiarized with stratified flows and its related concepts.

  • Problem Solving with Microbeam Analysis

    • 1st Edition
    • Volume 7
    • K. Kiss
    • English
    This book provides the reader with a working knowledge sufficient to select microbeam techniques for the efficient, cost-effective solution of complex problems arising in today's high-tech industries. Primarily written for the industrial analyst whose field of expertise is other than microbeam analysis, it will also be of help to engineers, plant chemists and industrial research scientists who often seek the aid of the microbeam analyst in their problem solving. Research and plant managers as well as administrators may also find this book helpful since they may be called upon to select and/or approve high-priced microbeam instruments.The book is organized into two parts. Part I gives a brief description of the various techniques and critically compares their capabilities and limitations. Part II consists of selected applications which show how the various techniques or their combinations are applied to characterize materials and to guide research in a wide variety of fields. The examples and case histories will undoubtedly aid the reader in problem solving, quality assurance and research-related tasks. Newcomers to the field will find enough information in the book to enable them to begin practical work and to apply the techniques.

  • Lectures on The Many-Body Problems V1

    • 1st Edition
    • E.R. Caianiello
    • English
    Lectures on Field Theory and the Many-Body Problem is a 23-chapter lecture series on the developments in the understanding of the structure and axiomatics of Field Theory, which has proved to be a most useful tool in the study of many-body problems. This book starts with a brief introduction to the TCP theorem, followed by a discussion on the gauge properties of the quantum electrodynamical quantities. The subsequent chapters describe the features and applications of unstable and composite particles to quantum field theory. These topics are followed by significant chapters on other aspects of the field theory, including the configuration space method, Wightman functions, vacuum expectation value, Pais doublets, time reversal in nuclear forces, and symmetry operations in quantum mechanics. This text also covers the ground state theory of many-particle systems and the many body problems at non-zero temperature. The last chapters explore the behavior of a Boson system, the polaron model, and the mathematical aspects of the Hilbert spaces. Physicists and researchers in allied sciences will find this book of great value.

  • The Photochemistry of Atmospheres

    • 1st Edition
    • Joel Levine
    • English
    The Photochemistry of Atmospheres: Earth, the Other Planets, and Comets discusses the photochemical and chemical processes in atmospheres This book focuses on the earth’s atmosphere in the past, present, and future, atmospheres of other planets and their satellites, and comets. General topics in atmospheric photochemistry, such as composition and structure, transfer of incoming solar radiation, and principles governing the rates of photochemical and chemical processes are also elaborated. This text also covers the role of eddy and molecular transport and continuity-transport equation used in theoretical numerical modeling studies. This publication is recommended for advanced-level courses in the atmospheric and planetary sciences, as well as reference for those interested in learning about atmospheric/climatic environmental problems, their causes and consequences, and discoveries concerning the atmospheres of neighboring worlds.

  • Random Processes: Measurement, Analysis and Simulation

    • 1st Edition
    • J. Cacko + 2 more
    • English
    This book covers the basic topics associated with the measurement, analysis and simulation of random environmental processes which are encountered in practice when dealing with the dynamics, fatigue and reliability of structures in real environmental conditions. The treatment is self-contained and the authors have brought together and integrated the most important information relevant to this topic in order that the newcomer can see and study it as a whole. This approach should also be of interest to experienced engineers from fatigue laboratories who want to learn more about the possible methods of simulation, especially for use in real time on electrohydraulic computer-controlled loading machines.Problems of constructing a measuring system are dealt with in the first chapter. Here the authors discuss the choice of measuring conditions and locations, as well as the organization of a chain of devices for measuring and recording random environmental processes. Some experience gained from practical measurements is also presented. The recorded processes are further analysed by various methods. The choice is governed by the aims of the measurements and applications of the results. Chapter 2 is thus devoted to methods of random process evaluations for digital computers, both from the fatigue and dynamic point of view. The most important chapter is Chapter 3 as this presents a review of up-to-date methods of random process simulation with given statistical characteristics. These methods naturally follow those of random process analysis, and their results form initial data for the corresponding simulations algorithms, including occurrences of characteristic parameters of counting methods, reproduction of correlation theory characteristics and of autoregressive models. The simulation of non-stationary processes is treated in depth, taking into account their importance for practical applications and also the lack of information of this subject.The book is intended to help resolve many practical problems concerning the methods and quality of environmental process evaluation and simulation which can arise when up-to-date loading systems with computer control are being used in material, component and structural fatigue and dynamic research.

  • Neutron Cross Sections

    Neutron Resonance Parameters and Thermal Cross Sections, Part A: Z=1-60
    • 1st Edition
    • S Mughabghab
    • English
    Neutron Cross Sections, Volume 1: Neutron Resonance Parameters and Thermal Cross Sections, Part A represents the fourth edition of what was previously known as BNL-325, Neutron Cross Sections, Volume 1. This three-chapter book provides the extensive list of detailed individual resonance parameters for each isotope. The first chapter deals with the thermal cross sections and average resonance parameters, as well as the physics of thermal and resonance neutrons, with particular emphasis on evaluation methods. This chapter also includes tables of standards of capture cross sections and scattering lengths, and commonly used nuclear physics formulas. The second chapter covers the direct or valence capture and the Brink-Axel treatment of electric dipole radiation. These topics are followed by a discussion on spin-dependent scattering lengths that are of interest to solid state. The third chapter describes the Maxwellian 30-keV capture cross sections that are of importance to studies of nucleosynthesis and age of the universe. This chapter also examines the s- and p-wave average radiative widths and gamma-ray strength functions that are required in capture cross section measurements. This book will appeal to nuclear and astrophysicists.

  • Diffusion in Solids

    Recent Developments
    • 1st Edition
    • A.S. Nowick
    • English
    Diffusion in Solids: Recent Developments provides an overview of diffusion in crystalline solids. This book discusses the various aspects of the theory of diffusion. Organized into nine chapters, this volume starts with a discussion on the process of diffusion in solids. This book then examines the tools that supplement the conventional diffusion measurements, including electromigration, ionic conductivity, isotope effects, and vacancy wind effects. This text explores the molecular dynamic calculation by which the interatomic forces must be assumed. Other chapters discuss the method of measurement of the isotope effect on diffusion, which is the most powerful method of determining relevant information about the correlation factor. This volume extensively discusses diffusion in organic and amorphous materials, as well as interstitial diffusion in solids. The final chapter deals with ionic motion and diffusion in various groups of materials called fast ionic conductors. Solid-state physicists, materials scientists, physical chemists, and electrochemists will find this book extremely useful.

  • Nonlinear Phenomena in Complex Systems

    • 1st Edition
    • A.N. Proto
    • English
    This book contains a thorough treatment of neural networks, cellular-automata and synergetics, in an attempt to provide three different approaches to nonlinear phenomena in complex systems. These topics are of major interest to physicists active in the fields of statistical mechanics and dynamical systems. They have been developed with a high degree of sophistication and include the refinements necessary to work with the complexity of real systems as well as the more recent research developments in these areas.

  • Dynamical Systems and Microphysics

    Control theory and Mechanics
    • 1st Edition
    • Austin Blaquiere
    • English
    Dynamical Systems and Microphysics: Control Theory and Mechanics contains the proceedings of the Third International Seminar on Mathematical Theory of Dynamical Systems and Microphysics held in Udine, Italy, on September 4-9, 1983. The papers explore the mechanics and optimal control of dynamical systems and cover topics ranging from complete controllability and stability to feedback control in general relativity; adaptive control for uncertain dynamical systems; geometry of canonical transformations; and homogeneity in mechanics. This book is comprised of 14 chapters and begins by discussing the relationship between complete controllability and Poisson stabilizability in relation to to Liapounov stabilizability. The next chapter looks at the conditions that must be met in order to control a dynamical system in an optimal fashion. The theory of optimal feedback control is used as an approach to the dynamics of a mass point in general relativity. The theory of reachability with feedback control is also used as an approach to geometrical optics in the frame of general relativity. The final chapter describes a system theoretic framework for the study of Hamiltonian systems with external forces. This monograph is intended primarily for researchers and graduate students in theoretical physics, mechanics, control and system theory, and mathematics. It may also be read profitably by philosophers of science and, to some extent, by those who have a keen interest in basic questions of contemporary mechanics and physics and who possess some background in the physical and mathematical sciences.

  • Charged–Particle Reaction List 1948–1971

    • 1st Edition
    • F McGowan
    • English
    Charged-Particle Reaction List 1948-1971 is a guide to experiments on charged-particle-ind... reactions that have been reported in journal literature during the period 1948 to June 1971. This compendium consists of the material from four Reaction Lists which have already appeared in Nuclear Data Tables. Each published article is listed under the target nuclei in the nuclear reactions which it treats. Reactions are denoted by A(a,b)B, where A and B are the target and residual nucleus, respectively; a is the bombarding charged particle and b is the outgoing product particle or particles. The guide also includes a brief information after the reaction designation, namely, the energy E of the bombarding projectile in MeV, a short statement of the type of data that is found in the paper, and a bibliographic information on the paper itself. A symbol THY in the extreme right-hand column denotes the theoretical papers concerned with analysis of nuclear reaction data. For papers dealing with experimental data on energy spectra, the angle of observation of the emerging reaction products, the accelerator, as well as the detector used are given for many entries under the column heading "Quantity Measured." The guide will prove immensely useful for theoretical physicists, nuclear physicists, and molecular physicists.

  • The Geometry of Algebraic Fermi Curves

    • 1st Edition
    • D Gieseker
    • English
    The Geometry of Algebraic Fermi Curves deals with the geometry of algebraic Fermi curves, with emphasis on the inverse spectral problem. Topics covered include the periodic Schrödinger operator and electrons in a crystal; one-dimensional algebraic Bloch varieties; separable Bloch varieties; and monodromy for separable and generic Bloch varieties. Compactification, the potential zero, and density of states are also discussed. This book consists of 13 chapters and begins by recalling the static lattice approximation for electronic motion at low temperature in a pure, finite sample of a d-dimensional crystal. The position of the Fermi energy and the geometry of the Fermi hypersurface in relation to the metallic properties of the crystal are described. The following chapters focus on the Bloch variety associated with a discrete two-dimensional periodic Schrödinger operator; algebraic Bloch varieties in one dimension; compactification of the Bloch variety; and the potential zero. The geometry of the Bloch variety of a separable potential is also considered, along with the topology of the family of Fermi curves. The final chapter demonstrates how the Bloch variety is determined by the density of states. This monograph will be a useful resource for students and teachers of mathematics.

  • Physics Of High-Tc Superconductors

    • 1st Edition
    • J Phillips
    • English
    Physics of High-Tc Superconductors highlights the important experiments that provide insights on the concept of high-temperature superconductors. Composed of 11 chapters, this book covers the theories and materials of these superconductors. The opening chapters of this book deal with the concepts at the cutting edge of materials science and the technical details of electron-phonon interaction calculations and their application to high-Tc superconductors. The subsequent chapters describe the various features of the atomic and electronic structure of high-Tc superconductor materials, such as quaternary, metallic, and pseudoperovskite copper oxides. These topics are followed by descriptions of the isotope effect, lattice vibrations, and optical spectra of high-Tc superconductor materials. The discussion then shifts to tunneling, relaxation, and morphological studies of these materials. The concluding chapter focuses on the superconductivity potential of bismates and thallates. Undergraduate materials science students will find this book invaluable.

  • High Resolution NMR in Solids Selective Averaging

    Supplement 1 Advances in Magnetic Resonance
    • 1st Edition
    • Ulrich Haeberlen
    • English
    High Resolution NMR in Solids: Selective Averaging presents the principles and applications of the four approaches to high resolution NMR in solids — magic-angle sample spinning, multiple-pulse, proton-enhanced nuclear induction, and indirect detection methods. Divided into six chapters, this book initially describes the tensorial properties of nuclear spin interactions in both ordinary and spin spaces. It then deals with the manifestations of nuclear magnetic shielding in NMR spectra of both single-crystal and powder samples, and then discusses the techniques for analyzing spectra and rotation patterns in terms of shielding tensors. A wide range of NMR phenomena that are result of intentional or natural, selective or unselective averaging processes and the average Hamiltonian theory that yields the inclusion of correction are covered. This book also provides a detailed discussion on multiple-pulse sequences intended for high resolution NMR in solids. The concluding chapter examines the applications of multiple-pulse techniques, with particular emphasis on measurements of 19F and 1H shielding tensors. Discussions on rotations of angular momentum operators; time ordering and the Magnus expansion; off-resonance averaging of the second-order dipolar Hamiltonian; and phase transients are covered in the supplemental texts.

  • Photochemical Processes in Organized Molecular Systems

    • 1st Edition
    • K. Honda
    • English
    Photochemical processes form the basis of life. Energy transfer through photons also underlies a wide range of phenomena ranging from the motion of atoms and molecules to the assembly of systems of molecules, such as polymers, Langmuir-Blodgett films and even liquid crystals.Photochemic... Processes in Organized Molecular Systems provides an overview of recent photochemical investigations of systems of molecules. The book is divided into four parts: the first two deal with current progress on the understanding of photoinduced chemical processes, the third and fourth chapter deal with the photochemistry of organized molecular systems including polymers, micelles and liquid crystals.This book should be studied by all who want to know more about this promising field of photochemical research, and about the fascinating processes that light can bring about.

  • Gauge Theory and Defects in Solids

    • 1st Edition
    • D.G.B. Edelen + 1 more
    • English
    This new series Mechanics and Physics of Discrete Systems aims to provide a coherent picture of the modern development of discrete physical systems. Each volume will offer an orderly perspective of disciplines such as molecular dynamics, crystal mechanics and/or physics, dislocation, etc. Emphasized in particular are the fundamentals of mechanics and physics that play an essential role in engineering applications.Volume 1, Gauge Theory and Defects in Solids, presents a detailed development of a rational theory of the dynamics of defects and damage in solids. Solutions to field equations are used to determine stresses, dislocation densities and currents that arise from histories of loading of boundaries of bodies. Analysed in detail is a gauge theory with a gauge group that is not semi-simple, and whose action occurs at the classical macroscopic level. Yang-Mills theory is applied where the state variables are elastic displacements in solids, determination of mechanical and electromagnetic observables by choice of gauge conditions is demonstrated, and practices of classical dislocation theory are derived from first principles.

  • Organic Scintillators and Scintillation Counting

    • 1st Edition
    • Donald Horrocks
    • English
    Organic Scintillation and Liquid Scintillation Counting covers the proceeding of The International Conference on Organic Scintillators and Liquid Scintillation Counting, which was held on July 7-10, 1970 at the University of California, San Francisco. This conference was held to discuss ideas concerned with the theory and physics of organic scintillators and the use of liquid scintillation for radioactivity measurement and other analytical applications. This text discusses liquid scintillator solvents, the vacuum ultraviolet excited luminescence of organic systems, and the application of scintillation counters to the assay of bioluminescence. Also covered are topics such as scintillation decay and absolute efficiencies in organic liquid scintillators, dose rate saturation in plastic scintillators, and the mass measurements in a liquid scintillation spectrometer. The book is recommended for physicists who would like to know more about the advancements in the field of organic and liquid scintillation and its applications.

  • General Circulation Models of the Atmosphere

    • 1st Edition
    • Julius Chang
    • English
    Methods in Computational Physics, Volume 17: General Circulation Models of the Atmosphere is a five-chapter text that covers the fundamentals and application of general circulation models to solving practical problems related to the atmosphere. The first chapter describes the various options in modeling physical processes and computational procedures. The next two chapters illustrate the influence of practical considerations to the compromise between a detailed physical description and reasonable computing time. Other chapters outline the computational details of two different numerical schemes for general circulation models. These chapters particularly provide an in-depth analysis of finite difference methods by proceeding from general considerations of homogeneous incompressible flow to the fine details of the particular numerical scheme. The final chapter discusses the fundamentals of the alternative spectral method for a multilevel spectral model that illustrates the capability of that approach. This book is of value to geoscientists, mathematicians, and physicists.

  • Quantum Theory of the Solid State A

    • 1st Edition
    • Joseph Callaway
    • English
    Quantum Theory of the Solid State, Part A, describes the concepts and methods, and introduces some of the central problems of the quantum theory of solids. This work is intended to be a single intellectual unit, although for reasons of convenience it has been divided into two parts. Part A contains much of the formalism required for the theoretical study of solids; Part B is oriented toward more specific problems. The present volume includes phenomenological treatments of lattice vibrations and magnetic order; a discussion of symmetry groups; and a description of the properties of one-electron wave functions and the principal techniques for calculating energy levels. Fairly lengthy bibliographies have been included at the end of each chapter to assist readers in making their way through the more specialized periodical literature. This book should be suitable as a textbook for students who have completed a one-year course in quantum mechanics and have some familiarity with the experimental facts of solid state physics. It should also be useful as a reference work.

  • Ultraviolet and Visible Absorption Spectra

    • 1st Edition
    • Herbert Hershenson
    • English
    Ultraviolet and Visible Absorption Spectra, Index for 1930-1954 is a reference volume listing of ultraviolet and visible absorption spectra in the literature. This book contains about 32,000 references to published absorption spectra in 27 important American and European journals and one book. The index is arranged according to the compounds whose spectra are given. The indexing arrangement is roughly similar to that used in Chemical Abstracts, although it has not been practical to conform to Chemical Abstracts nomenclature throughout. Wherever possible, all references for a particular compound have been listed under a single name, but there will be some instances where listings for the compound may be found under several different names. The rules used by Chemical Abstracts have been followed where practical, but some inconsistencies will be found. Researchers in the fields of organic, inorganic, and analytical chemistry will find this Index a great value.

  • Inelastic Ion–Surface Collisions

    • 1st Edition
    • N Tolk
    • English
    Inelastic Ion-Surface Collisions is a collection of papers presented at the 1976 International Workshop on Inelastic-Ion-Surfac... Collisions, held at Bell Laboratories, Murray Hill, New Jersey. This book contains 12 chapters and begins with the identification and study of the underlying physical mechanisms associated with ionization, neutralization, and excitation responsible for the observed sputtering and particle backscattering outershell inelastic collision phenomena. Other chapters discuss the role of the bulk, the surface, and the near surface interaction regions on the degree of ionization, neutralization, and excitation. The remaining chapters deal with the oscillations in the energy dependence of backscattered ions, wake riding states, and optical polarization effects from beam transmission through tilted foils and from beam particle bombardment of surfaces at grazing incidence. This book is of great value to atomic, solid state, nuclear, surface, chemical, and space physicists.

  • Optical Bistability: Controlling Light With Light

    • 1st Edition
    • Hyatt Gibbs
    • English
    Optical Bistability: Controlling Light with Light focuses on optical bistability in nonlinear optical systems. Emphasis is on passive (non-laser) systems that exhibit reversible bistability with input intensity as the hysteresis variable, along with the physics and the potential applications of such systems for nonlinear optical signal processing. This book consists of seven chapters and begins with a historical overview of optical bistability in lasers and passive systems. The next chapter describes steady-state theories of optical bistability, including the Bonifacio-Lugiato model, as well as the boundary conditions of an optical cavity and the coupled Maxwell-Bloch equations. Both intrinsic and hybrid experiments are then described, along with light-by-light control, pulse reshaping, and external switching. The transient phenomena that arise either from instabilities in the bistable systems themselves or from fluctuations in the number of nonlinear atoms or in the number of intracavity photons are also considered. The final chapter examines the characteristics and fundamental limitations of an ideal device, the prospect of improving devices by identifying giant nonlinearities, and the utilization of the full power of optics by parallel processing. This monograph is intended for new entrants and active workers in the field of optical bistability.

  • Operator Methods in Quantum Mechanics

    • 1st Edition
    • Martin Schechter
    • English
    Operator Methods in Quantum Mechanics demonstrates the power of operator theory as a tool in the study of quantum mechanics. More specifically, it shows how to use algebraic, representation-indep... methods to solve one- and three-dimensional problems, including certain relativistic problems. It explains the applications of commutation relations, shift operators, and the virial, hypervirial, and Hellman-Feyman theorems to the calculation of eigenvalues, matrix elements, and wave functions. Organized into 16 chapters, this book begins by presenting a few simple postulates describing quantum theory and looking at a single particle moving along a straight line. Then, it introduces mathematical techniques that answer questions about the particle. It also discusses the use of spectral theorem in answering various questions concerning observables, along with negative eigenvalues and methods of determining parts of the spectrum or estimating lower bounds. Moreover, it explains the time-independent or stationary-state scattering theory and states, long-range potentials, and completeness and strong completeness. Oscillating potentials, eigenfunction expansions, restricted particles, hard-core potentials, the invariance principle, and the use of trace class operators to treat scattering theory are also described in this book. This volume is a valuable resource for physicists, as well as students of intermediate quantum mechanics and postgraduate students who want to be acquainted with the algebraic method of solving quantum mechanical problems.

  • Landau Level Spectroscopy

    • 1st Edition
    • Volume 27
    • English
    Modern Problems in Condensed Matter Sciences, Volume 27.1: Landau Level Spectroscopy focuses on the processes, reactions, methodologies, and approaches involved in condensed matter sciences, including semiconductors, resonances, and spectroscopy. The selection first tackles cyclotron resonance and phonon-assisted cyclotron resonance. Discussions focus on absorption coefficient for phonon-assisted transitions, effect of a direct current electric field, cyclotron resonance as a kinetics experiment, and cyclotron resonance in the quantum limit. The manuscript then takes a look at polaron effects in cyclotron resonance and electric-dipole spin resonances. The book examines spin-flip Raman scattering and magnetoplasma effects in IV-VI compounds. Topics include magnetoplasma effects in strained semiconductor layers; magnetoplasma effects in two-dimensional systems; experimental and theoretical results of nonmagnetic semiconductors; and experimental and theoretical results of diluted magnetic semiconductors. The manuscript then surveys the interband magneto-optics of semiconductors as diamagnetic exciton spectroscopy and interband magneto-optics in narrow-gap semiconductors. The selection is a dependable source of information for scientists and readers interested in the Landau level spectroscopy.

  • Cardiovascular Fluid Dynamics

    • 1st Edition
    • D.H. Bergel
    • English
    Cardiovascular Fluid Dynamics, Volume 1 explores some problems and concepts of mammalian cardiovascular function, with emphasis on experimental studies and methods. It considers pressure measurement in experimental physiology, including the measurements of pulsatile flow, flow velocity, lengths, and dimensions; the use of control theory and systems analysis in cardiovascular dynamics; the application of computer models in cardiovascular research; the meaning and measurement of myocardial contractility; and the consequences of the steady-state analysis of arterial function. Organized into 10 chapters, this volume begins with an overview of the mammalian cardiovascular system and the essential features of cardiovascular function. It then discusses the practical problems associated with the use of pressure transducers in physiological and cardiac laboratories, the challenges involved in pulsatile flow measurement using flowmeters and thermal devices, and the mechanical analysis of the circulatory system. It explains some computer modeling techniques used in investigating the hemodynamics of the cardiovascular system, including the heart and heart muscle; basic concepts of muscle mechanics and the mechanical properties of cardiac muscle; the fluid mechanics of heart valves; and the pressure and flow in large arteries. The book concludes with a chapter on vascular resistance and vascular input impedance. This book is intended for biologists, physical scientists, and others interested in cardiovascular physiology.

  • Surfaces and Interfaces: Physics and Electronics

    • 1st Edition
    • R.S. Bauer
    • English
    Surfaces and Interfaces: Physics and Electronics covers the proceedings of the second Trieste ICTP-IUPAP Semiconductor Symposium, conducted at the International Center for Theoretical Physics in Trieste, Italy on August 30 to September 3, 1982. The book focuses on the processes, methodologies, reactions, and approaches involved in semiconductor physics. The selection first elaborates on the electronic properties and surface geometry of GaAs and ZnO surfaces; electronic structure of Si (III) surfaces; and photoemission studies of surface states on Si (III) 2X1. Discussions focus on consistency of different experiments, relating experiments to a theoretical model, quenching of surface states by hydrogen, inverse photoemission results, and basic data and models of the low-index ZnO surfaces. The text then examines Si (III) 2X1 studies by angle resolved photoemission; electronic surface states at steps in Si (III) 2X1; and a novel method for the study of optical properties of surfaces. The manuscript takes a look at spot profile analysis (LEED) of defects at silicon surfaces; chemisorption-induce... defects at interfaces on compound semiconductors; and surface defects on semiconductors. The microscopic properties and behavior of silicide interfaces, recombination at semiconductor surfaces and interfaces, and dipoles, defects, and interfaces are also discussed. The selection is a highly recommended source of data for physicists and readers wanting to study semiconductor physics.

  • Optical Waveguides

    • 1st Edition
    • N Kapany
    • English
    Optical Waveguides describes waveguide phenomena in classical optical terms. This book discusses mode propagation by using equivalent plane waves, polarization, rays, and intensity distributions. Comprised of seven chapters, this book starts with an overview of the history of optical waveguides with emphasis on the earliest studies of dielectric guides. This text then explores the theoretical treatment of guided waves in planar dielectric waveguides in terms of the characteristic modes of these structures. Other chapters consider the interferometric description of the coupling of a uniform beam of light into a thin film through the mechanism of frustrated total reflection. This book discusses as well the properties of the modes of fiber optical waveguides. The final chapter deals with the general properties of the characteristic TE wave (modes) of a symmetric slab guide by direct solution of the homogeneous Maxwell equations. Students of optics and physics, as well as electronic, optical, and communications engineers, will find this book useful.

  • Physical Fluid Dynamics

    • 1st Edition
    • P McCormack
    • English
    Physical Fluid Dynamics is a textbook for students of physics that reflects the origins and the future development of fluid dynamics. This book forms a concise and logically developed course in contemporary Newtonian fluid dynamics, suitable for physics and engineering science students. The text is composed of chapters devoted to the discussion of the physical properties of fluids, vortex dynamics, slow viscous flow, and particulate fluid dynamics. An adequate course in the dynamics of real (viscous) fluids, kinematics, equations of motion, boundary-layer theory, and compressible flow is also given. The textbook is intended for junior or senior undergraduate level students of physics and engineering.

  • Introduction to Nonlinear Laser Spectroscopy 2e

    • 1st Edition
    • Marc Levenson
    • English
    Introduction to Nonlinear Laser Spectroscopy, Revised Edition presents the most useful nonlinear spectroscopy techniques at a level accessible to spectroscopists and graduate students unfamiliar with nonlinear optics. This book discusses the principles of nonlinear laser spectroscopy. Organized into seven chapters, this edition starts with an overview of the stimulated Raman effect and coherent anti-Stokes Raman spectroscopy, which can be used in a varied way to generate radiation in the ultraviolet and vacuum-ultraviolet areas. This text then explains the exciting possibilities started by saturated absorption and related techniques, including improved spectroscopic precision, studies of collisional dynamics, and better measurements of fundamental constants and of basic units. Other chapters examine Hamiltonian relaxation, which describes all of the processes that return the ensemble to thermal equilibrium. The final chapter deals with the method of infrared spectrophotography, which combines efficient detection, time resolution, and coherent infrared. Spectroscopists and graduate students will find this book extremely useful.

  • Fourier Transform Infrared Spectra

    Applications to Chemical Systems
    • 1st Edition
    • John R. Ferraro + 1 more
    • English
    The final and largest volume to complete this four-volume treatise is published in response to the intense commercial and research interest in Fourier Transform Interferometry.Prese... current information from leading experts in the field, Volume 4 introduces new information on, for example, applications of Diffuse Reflectance Spectroscopy in the Far-Infrared Region. The editors place emphasis on surface studies and address advances in Capillary Gas Chromatography - Fourier Transform Interferometry.Volum... 4 especially benefits spectroscopists and physicists, as well as researchers in physical, analytical, and surface chemistry.FROM THE PREFACE: Several reasons can be cited for the need to publish Volume 4 in this treatise.First, interest in Fourier transform interferometry (FT-IR) has continued. The number of commercial manufacturers of FT-IR instrumentation has increased, reflecting the increase in demand for such instrumentation. The main thrust in FT-IR instrumentation has focused on applications, and many techniques using FT-IR instrumentation have been generated in order to solve problems heretofore unsolvable. The interest in surfaces relative to catalysts, polymers, and electrical conductors has escalated. Three chapters in Volume 4 are devoted to surfaces. Second, the great acceptance of Volumes 1 through 3 and the demand to continue the treatise have induced us to publish Volume 4.The present volume contains nine chapters, making it the largest of the four volumes. Chapter 1 deals with infrared data processing techniques. Chapter 2 concerns itself with circular dichroism*b1FT-IR. Chapter 3 presents an update on GC*b1FT-IR, a rapidly moving field. Chapter 4 deals with the combination of FT-IR and thermal analysis. Advances in coal analyses using FT-IR are presented in Chapter 5. Reflectance studies are highlighted in Chapters 6, 7, and 8. Chapter 6 deals with structural characterizations made with Langmuir*b1Blodgett monolayers. Also in Chapter 6, the extension of DRIFT into the far-infrared region is shown to be feasible and valuable. Reflection*b1absorpt... surface studies (FT-IRRAS) are discussed in Chapter 8. Chapter 9 updates us on photoacoustic spectroscopy*b1FT-IR... of the contributions are made by working experts in these areas. It is the hope that Volume 4 continues in the spirit of the purpose of these volumes, namely, to keep the scientific communities abreast of new developments in FT-IR as applied to chemical systems.

  • High Excitation and Short Pulse Phenomena

    • 1st Edition
    • M.H. Pilkuhn
    • English
    High Excitation and Short Pulse Phenomena contains the proceeding of the Third Trieste ICTP-IUPAP Semiconductor Symposium on ""High Excitation and Short Pulse Phenomena"", held at the International Center for Theoretical Physics, Trieste, Italy on July, 2-6 1984. This book contains the keynote papers of the symposium and the contributions from the participants. It describes the non-equilibrium electron-hole plasmas in direct and indirect gap semiconductors; transport of plasmas and of hot carriers; and expansion velocities. The book also elucidates the screening effects involved in the exciton-plasma transition; the optical bistability and nonlinearity; and experimental techniques with short pulse spectroscopy. Other topics emphasized are the physical aspects of laser annealing and of melting at the highest excitation levels, as well as the results of high excitation and short pulse physics of quantum wells. The fast relaxation processes, as well as the carrier-carrier and carrier-phonon interactions are also explained. This material will serve as a source of information and reference, and will stimulate ways for further research.

  • Artificial and Mathematical Theory of Computation

    Papers in Honor of John McCarthy
    • 1st Edition
    • Vladimir Lifschitz
    • English
    Artificial and Mathematical Theory of Computation is a collection of papers that discusses the technical, historical, and philosophical problems related to artificial intelligence and the mathematical theory of computation. Papers cover the logical approach to artificial intelligence; knowledge representation and common sense reasoning; automated deduction; logic programming; nonmonotonic reasoning and circumscription. One paper suggests that the design of parallel programming languages will invariably become more sophisticated as human skill in programming and software developments improves to attain faster running programs. An example of metaprogramming to systems concerns the design and control of operations of factory devices, such as robots and numerically controlled machine tools. Metaprogramming involves two design aspects: that of the activity of a single device and that of the interaction with other devices. One paper cites the application of artificial intelligence pertaining to the project "proof checker for first-order logic" at the Stanford Artificial Intelligence Laboratory. Another paper explains why the bisection algorithm widely used in computer science does not work. This book can prove valuable to engineers and researchers of electrical, computer, and mechanical engineering, as well as, for computer programmers and designers of industrial processes.

Related subjects