Skip to main content
Elsevier
View Cart

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

BooksJournals

    • Handbook of Display Technology

      • 1st Edition
      • June 3, 1992
      • Joseph A. Castellano
      • English
      • Hardback
        9 7 8 0 1 2 1 6 3 4 2 0 9
      • eBook
        9 7 8 0 0 8 0 9 1 7 2 4 5
      This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display technology, go to the experts: http://www.insightme...

    • Centrifugal Pumps

      • 2nd Edition
      • May 21, 1992
      • Val S. Lobanoff + 1 more
      • English
      • Hardback
        9 7 8 0 8 7 2 0 1 2 0 0 4
      • Paperback
        9 7 8 1 4 9 3 3 0 3 4 5 8
      • eBook
        9 7 8 0 0 8 0 5 0 0 8 5 0
      Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.

    • Cognitive Ergonomics

      • 1st Edition
      • May 7, 1992
      • G.C. van der Veer + 2 more
      • English
      • Hardback
        9 7 8 0 4 4 4 8 9 5 0 4 2
      • eBook
        9 7 8 0 0 8 0 9 3 4 3 5 8
      This collection of papers illustrates how concepts, theories and techniques from experimental psychology can be applied in the domain of Human-Computer Interaction (HCI). An experimental psychological basis for cognitive ergonomics is presented, built on a foundation of theoretical and experimental research. In addition, various issues in cognitive ergonomics are closely examined, including performance in specific interactive tasks - such as computer programming and program debugging. Other subject areas covered include database interrogation, text editing and graphics design.

    • Materials for Tribology

      • 1st Edition
      • May 7, 1992
      • William Glaeser
      • English
      • Paperback
        9 7 8 0 4 4 4 5 5 5 6 4 9
      • eBook
        9 7 8 0 0 8 0 8 7 5 8 4 2
      This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.

    • Dynamic Modeling of Transport Process Systems

      • 1st Edition
      • April 27, 1992
      • C. A. Silebi + 1 more
      • English
      • Hardback
        9 7 8 0 1 2 6 4 3 4 2 0 0
      • Paperback
        9 7 8 0 1 2 4 1 2 0 0 9 9
      • eBook
        9 7 8 0 0 8 0 9 2 5 8 2 0
      This book presents a methodology for the development and computer implementation of dynamic models for transport process systems. Rather than developing the general equations of transport phenomena, it develops the equations required specifically for each new example application. These equations are generally of two types: ordinary differential equations (ODEs) and partial differential equations (PDEs) for which time is an independent variable. The computer-based methodology presented is general purpose and can be applied to most applications requiring the numerical integration of initial-value ODEs/PDEs. A set of approximately two hundred applications of ODEs and PDEs developed by the authors are listed in Appendix 8.

    • Computer Vision and Image Processing

      • 1st Edition
      • April 27, 1992
      • Linda Shapiro
      • English
      • Paperback
        9 7 8 0 1 2 4 1 2 2 4 3 7
      • eBook
        9 7 8 0 3 2 3 1 4 1 5 6 7
      Computer Vision and Image Processing contains review papers from the Computer Vision, Graphics, and Image Processing volume covering a large variety of vision-related topics. Organized into five parts encompassing 26 chapters, the book covers topics on image-level operations and architectures; image representation and recognition; and three-dimensional imaging. The introductory part of this book is concerned with the end-to-end performance of image gathering and processing for high-resolution edge detection. It proposes methods using mathematical morphology to provide a complete edge detection process that may be used with any slope approximating operator. This part also discusses the automatic control of low-level robot vision, presents an image partitioning method suited for parallel implementation, and describes invariant architectures for low-level vision. The subsequent two sections present significant topics on image representation and recognition. Topics covered include the use of the primitives chain code; the geometric properties of the generalized cone; efficient rendering and structural-statistic... character recognition algorithms; multi-level thresholding for image segmentation; knowledge-based object recognition system; and shape decomposition method based on perceptual structure. The fourth part describes a rule-based expert system for recovering three-dimensional shape and orientation. A procedure of intensity-guided range sensing to gain insights on the concept of cooperative-and-iter... strategy is also presented in this part. The concluding part contains supplementary texts on texture segmentation using topographic labels and an improved algorithm for labeling connected components in a binary image. Additional algorithms for three-dimensional motion parameter determination and surface tracking in three-dimensional binary images are also provided.

    • Fatigue of Metallic Materials

      • 2nd Edition
      • Volume 71
      • April 13, 1992
      • M. Klesnil + 1 more
      • English
      • Hardback
        9 7 8 0 4 4 4 9 8 7 2 3 5
      • eBook
        9 7 8 0 0 8 0 9 3 4 6 0 0
      This book reviews problems in the mechanical behaviour of cyclically loaded metallic materials, primarily with regard to the nature of the fatigue process. The first edition of the book appeared in 1980. The present second edition represents a revised form of the original book and also covers recent developments in the field. As the book focuses on physical-metallurgic... aspects, it occupies a unique and important position in the technical literature, which has so far been devoted mainly to engineering metal fatigue problems and their technical solution in specific practical cases. The book provides a compact review of current knowledge on physical metallurgical processes that accompany and affect the fatigue of metallic materials, and also presents the background for applying the new results to practical designing and to the selection of materials in engineering practice. The authors present an updated review of results from countries both in the east and the west and cover a relatively large field in a concise manner. The work will be of value to research workers and students following advanced and post-graduate courses in the fields of materials science and mechanical engineering.

    • Camera Technology

      • 1st Edition
      • April 7, 1992
      • Norman Goldberg
      • English
      • Paperback
        9 7 8 0 1 2 4 1 2 0 3 7 2
      • Hardback
        9 7 8 0 1 2 2 8 7 5 7 0 0
      • eBook
        9 7 8 0 0 8 0 5 0 0 6 6 9
      For anyone who has ever wondered how cameras work, this book is a pleasant way to learn. It is generously endowed with enough fundamentals to satisfy the technical specialist, without intimidating the casual but curious amateur photographer. The author has repaired, modified, and designed and analyzed cameras for the past forty five years. With this background, he goes beyond describing camera functions based on advertised data, instead the book explains how various cameras really work. The book peels off the cover panels and lets you look into the dark side of the lens. The dozen or so formulas use simple math and the drawings alone are worth the price of admission.

    • Theory of Physical and Technical Measurement

      • 1st Edition
      • March 25, 1992
      • J. Piotrowski
      • English
      • Paperback
        9 7 8 0 4 4 4 5 6 5 3 2 7
      • eBook
        9 7 8 0 4 4 4 5 9 8 3 3 2
      A complete theory of measurement from the principles of establishing the reality images to measurement procedures is presented in this book. A precise mathematical model of errors is presented with the use of various applications to interpret measurement results. Axioms are formulated which provide a deduction theory of measurement. The variety of problems addressed by modern science results in a diversity of models of physical and metrological phenomena, and leads to the view that there is not now, and may never be, a uniform theory of measurement. There is a need, however, to establish a foundation common to all measurements and studies, and this is the author's main aim allied to attempts to create a universal theory of measurement. The purpose of measurement is discussed. Many practical examples illustrating the methodology of modelling, calibration and the analysis of the results of measurement are reviewed. The book is designed for physicists, analytical and physical chemists and engineers involved with the work of metrology. A knowledge of physics, probability and statistics and the principles of metrology is a prerequisite for understanding this work.

Related subjects

Aerospace sciences

Automotive engineering

Civil and structural engineering

Electrical and electronic engineering

General engineering

Industrial engineering

Marine engineering

Materials engineering

Mechanical engineering

Mechanics

Media technology

Numerical methods in engineering

Systems and control