Skip to main content
Elsevier

Books in Materials science

The Materials Science portfolio includes titles covering core knowledge and new research and applications across the field: nanotechnology and nanomaterials; polymers and plastics; textiles; composites and ceramics; electronic, magnetic, and optical materials; metals and alloys; biomaterials; surface and film science and coating technologies; materials chemistry, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world application examples provide valuable, actionable insights for researchers, students, and the corporate sector. Elsevier's Materials Science portfolio places special attention on areas of current and emerging interest such as additive manufacturing / 3D printing, graphene and 2D materials, smart materials, biomimetics... The content in Elsevier's Materials Science titles program addresses core challenges facing science and society: sustainable energy technologies, the circular economy, health and human welfare.

  • Geosynthetics in Filtration, Drainage and Erosion Control

    • 1st Edition
    • R.M. Koerner
    • English
    Geosynthetics can, and have, played a pivotal role in providing the primary functions of filtration, drainage and erosion control. Within each category this book counterpoints the design, testing and performance of the various materials against one another. The facilitation of filtration by a number of different woven and non–woven geotextiles is discussed. Design is centred around a balance between open voids [for adequate permeability] and closed voids [for proper soil retention]. This balance is compromised by long term clogging or soil loss from either the upstream soil particles or by the nature of the permeating fluid. This is a major focal area of the book.One solution to excessive filter clogging is to open up the geotextile's voids and allow sediments and micro–organisms in the permeating fluid to pass through. The challenge then becomes the design and potential clogging of the drain. The drainage aspect of geosynthetics is the second focal area.Erosion control is closely related to both filtration and drainage. The tremendous design problems, and equally large repair problems on all types of facilities, are addressed. Highway slopes, earth dams, landfill covers and solid waste daily covers are a few common situations.

  • Surface Treatment of Materials for Adhesive Bonding

    • 2nd Edition
    • Sina Ebnesajjad + 1 more
    • English
    Aimed at engineers and materials scientists in a wide range of sectors, this book is a unique source of surface preparation principles and techniques for plastics, thermosets, elastomers, ceramics and metals bonding. With emphasis on the practical, it draws together the technical principles of surface science and surface treatments technologies to enable practitioners to improve existing surface preparation processes to improve adhesion and, as a result, enhance product life. This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be an exhaustive overview, including more detailed explanation where necessary, in a continuous and logical progression. The book provides a necessary grounding in the science and practice of adhesion, without which adequate surface preparation is impossible. Surface characterization techniques are included, as is an up-to-date assessment of existing surface treatment technologies such as Atmospheric Plasma, Degreasing, Grit blasting, laser ablation and more. Fundamental material considerations are prioritised over specific applications, making this book relevant to all industries using adhesives, such as medical, automotive, aerospace, packaging and electronics. This second edition represents a full and detailed update, with all major developments in the field included and three chapters added to cover ceramic surface treatment, plasma treatment of non-metallic materials, and the effect of additives on surface properties of plastics.

  • Fresh Concrete

    Properties and Tests
    • 1st Edition
    • Volume 38
    • P. Bartos
    • English
    Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.

  • Characterization in Silicon Processing

    • 1st Edition
    • Yale Strausser
    • English
    This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.

  • Smithells Metals Reference Book

    • 7th Edition
    • E A Brandes + 1 more
    • English
    Reviews of previous editions:'A publication of no equal that has become an essential reference during its 35 years of publication' ASLIB Book List'All metallurgists will covet a copy of Smithells' Chemistry and Industry'(It) provides an invaluable reference source for all workers, libraries and research laboratories in the field of engineering and metallurgy' BNF AbstractSmithells is the only single volume that provides all the data and references needed by those practicing metallurgy. The seventh edition of this standard reference work for metallurgists includes important new chapters on powder metallurgy and superconductivity. All chapters have been thoroughly revised to bring them up to date with developments since the last edition in 1983. In all this is the most complete compendium of information for industrial and theoretical metallurgists, and it is now available in a more accessible format including current data to 1997.Also available is Smithells Light Metals Handbook (ISBN 0750636254).

  • Engineering Materials Volume 2

    An Introduction to Microstructures, Processing and Design
    • 2nd Edition
    • David R.H. Jones + 1 more
    • English
    Materials are evolving faster today than at any time in history. As a consequence the engineer must be more aware of materials and their potential than ever before. In comparing the properties of competing materials with precision involves an understanding of the basic properties of materials, how they are controlled by processing, formed, joined and finished and of the chain of reasoning that leads to a successful choice. This book will provide the reader with this understanding.Materi... are grouped into four classes: Metals, Ceramics, Polymers and Composites, and each are examined in turn. The chapters are arranged in groups, with a group of chapters to describe each of the four classes of materials. Each group first of all introduces the major families of materials that go to make up each materials class. The main microstructural features of the class are then outlined and the reader is shown how to process or treat them to get the structures (properties) that are wanted. Each group of chapters is illustrated by Case Studies designed to help the reader understand the basic material.This book has been written as a second level course for engineering students. It provides a concise introduction to the microstructures and processing of materials and shows how these are related to the properties required in engineering design.

  • Fundamentals of Metal-Matrix Composites

    • 1st Edition
    • Subra Suresh
    • English
    `Metal-Matrix Composites' are being used or considered for use in a variety of applications in the automotive, aerospace and sporting goods industries. This book contains sixteen chapters, all written by leading experts in the filed, which focus on the processing, microstructure and characterization, mechanics and micromechanics of deformation, mechanics and micromechanics of damage and fracture, and practical applications of a wide variety of metal composites.A particularly noteworthy feature of this authoritative volume is its collection of state-of-the-art reviews of the relationships among processing, microstructural evolution, micromechanics of deformation and overall mechanical response.

  • Corrosion 2 Volume Set

    • 3rd Edition
    • G T Burstein + 2 more
    • English
    Corrosion science is probably unique in crossing the borders of almost all technologies and since 1963 `Corrosion' has been the leading source of information on the subject. It provides an encyclopedic coverage of corrosion science and technology and is an essential first point of reference for everyone in the field. The science has advanced significantly in the seventeen years since the publication of the second edition and this new edition has been thoroughly updated to reflect this.`Corrosion' is a two-volume reference work embracing a vast range of topics including high-temperature and aqueous corrosion and their control. It was first published in 1963 by George Newnes Ltd and over the years it has gained an international reputation. This edition extends to over 2700 pages, and contains 138 sections all written by specialists. It follows the format of previous editions, some sections have been completely rewritten, whilst others have been altered and extended. New sections have been added to cover areas not previously included. Lionel Shreir, who wrote the first two editions, has been joined by two editors, Ray Jarman and Tim Burstein, to produce this unique work. Although he did not live to see its publication it is hoped that this book serves as a fitting tribute to his memory.

  • The Materials Science of Thin Films

    • 1st Edition
    • Milton Ohring
    • English
    This is the first available textbook to provide comprehensive coverage of the science and technology of thin films and coatings. Developed for upper-level undergraduate and beginning graduate students, the book discusses physical and chemical vapor deposition processes; phenomena involving nucleation and growth, stress, diffusion and reaction; structural and chemical characterization techniques; and applications involving coatings, magnetic and optical recording materials, integrated optics, and quantum devices. The book includes chapters on epitaxy and surface modification in addition to discussing emerging technologies such as diamond films and high Tc superconductors. Complete problem sets are provided at the end of each chapter to facilitate self-study.

  • Plastics Materials

    • 6th Edition
    • J A Brydson
    • English
    The sixth edition of this classic reference work continues to provide a balanced and comprehensive overview of the nature, manufacture, structure, properties, processing and applications of commercially available plastics materials. Aiming to bridge the gap between theory and practice, it enables scientists to understand the commercial implications of their work as well as providing technologists with a theoretical background.Early chapters describe the history and nature of plastics and explain the relationship of chemical structure and properties. Preparation, structure, properties processing and applications of each class of plastics materials are then considered separately. New chapters have been added on materials selection and special polymers, including biodegradable and electroconductive polymers and thermoplastic elastomers. In addition many new plastics materials have been added throughout the text and more information has been included on testing methods and data. The sections on production/consumpti... statistics has also been completely updated. Reviews of previous editions:It's a genuine milestone in reference works...and the book is a 'must' for anyone concerned with the selection, preparation, compounding or processing of these materials' - British Plastic and Rubber 'This latest edition maintains the high standard set previously... The book s a 'must' for both student and practising technologists' - Plastics Materials'The fourth edition of John Brydson's book carries on the splendid traditions of the previous three. As a reference book for a laboratory, sales office or student's bedroom, it is unrivalled in its comprehensive of the history, chemistry and technology of plastics'. - Reinforced Plastics 'As a reference book on the subject it is unique for its depth in such a compact form, yet allied to that it is so eminently readable. It is a working chemist's book for a working chemist.' - Journal of the Oil and Colour Chemists Association 'This is one of the most comprehensive reference books in its class.' - Polymer News, March 1996

  • Heat Pumps

    • 2nd Edition
    • D.B.A. Macmichael
    • David Reay
    • English
    A fully revised and extended account of the design, manufacture and use of heat pumps in both industrial and domestic applications. Topics covered include a detailed description of the various heat pump cycles, the components of a heat pump system - drive, compressor, heat exchangers etc., and the more practical considerations to be taken into account in their selection.

  • Chalcogenide Glasses

    Preparation, Properties and Applications
    • 1st Edition
    • J-L Adam + 1 more
    • English
    The unique properties and functionalities of chalcogenide glasses make them promising materials for photonic applications. Chalcogenide glasses are transparent from the visible to the near infrared region and can be moulded into lenses or drawn into fibres. They have useful commercial applications as components for lenses for infrared cameras, and chalcogenide glass fibres and optical components are used in waveguides for use with lasers, for optical switching, chemical and temperature sensing and phase change memories. Chalcogenide glasses comprehensively reviews the latest technological advances in this field and the industrial applications of the technology.Part one outlines the preparation methods and properties of chalcogenide glasses, including the thermal properties, structure, and optical properties, before going on to discuss mean coordination and topological constraints in chalcogenide network glasses, and the photo-induced phenomena in chalcogenide glasses. This section also covers the ionic conductivity and physical aging of chalcogenide glasses, deposition techniques for chalcogenide thin films, and transparent chalcogenide glass-ceramics. Part two explores the applications of chalcogenide glasses. Topics discussed include rare-earth-doped chalcogenide glass for lasers and amplifiers, the applications of chalcogenide glasses for infrared sensing, microstructured optical fibres for infrared applications, and chalcogenide glass waveguide devices for all-optical signal processing. This section also discusses the control of light on the nanoscale with chalcogenide thin films, chalcogenide glass resists for lithography, and chalcogenide for phase change optical and electrical memories. The book concludes with an overview of chalcogenide glasses as electrolytes for batteries.Chalcogeni... glasses comprehensively reviews the latest technological advances and applications of chalcogenide glasses, and is an essential text for academics, materials scientists and electrical engineers working in the photonics and optoelectronics industry.

  • Advances in Photovoltaics: Part 2

    • 1st Edition
    • Volume 89
    • English
    Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. Originally widely known as the "Willardson and Beer" Series, it has succeeded in publishing numerous landmark volumes and chapters. The series publishes timely, highly relevant volumes intended for long-term impact and reflecting the truly interdisciplinary nature of the field. The volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry. This volume is the second of a set of seven on the topic of photovoltaics.

  • Theoretical and Applied Mechanics

    Proceedings of the XVIth International Congress of Theoretical and Applied Mechanics Held in Lyngby, Denmark, 19-25 August, 1984
    • 1st Edition
    • Frithiof I. Niordson + 1 more
    • English
    Theoretical and Applied Mechanics covers the proceedings of the 16th International Congress of Theoretical and Applied Mechanics, held at the Technical University of Denmark, Lyngby, Denmark on August 19-25, 1984. The contributors consider the significant advances in the thriving field of mechanics. This book is composed of 21 chapters, and begins with an overview of space research contributions in understanding fluid media mechanics. This topic is followed by discussions on some aspects and fundamentals of mechanics, such as chaos, computer application, resonant phenomena, adiabaticity, and nonlinear acoustics. The following chapters explore the various applications of theoretical and applied mechanics, including in marine structures, oil recovery, and ice and snow mechanics. This book also deals with nonlinear wave motion, hydrodynamic systems, ocean wave spectra, and Helmholtz concept. The remaining chapters look into the issues of steady water bifurcation, concept of anisotropic soils, and flow visualization. This book is of great value to physicists and research workers who wish to expand their knowledge in mechanics.

  • Superconductors, Surfaces and Superlattices

    Proceedings of the Symposia CC: Superlattice DD: Surfaces and Interfaces HH: Superconducting Materials of the 3rd IUMRS International Conference on Advanced Materials, Sunshine City, Ikebukuro, Tokyo, Japan, August 31 - September 4, 1993
    • 1st Edition
    • H. Sakaki
    • English
    Superconductors, Surfaces and Superlattices

  • Biomimetic Biomaterials

    Structure and Applications
    • 1st Edition
    • Andrew J. Ruys
    • English
    A significant proportion of modern medical technology has been developed through biomimetics, which is biologically inspired by studying pre-existing functioning systems in nature. Typical biomimetically inspired biomaterials include nano-biomaterials, smart biomaterials, hybrid biomaterials, nano-biocomposites, hierarchically porous biomaterials and tissue scaffolds. This important book summarises key research in this important field.The book is divided into two parts: Part one is devoted to the biomimetics of biomaterials themselves while part two provides overviews and case studies of tissue engineering applications from a biomimetics' perspective. The book has a strong focus on cutting edge biomimetically inspired biomaterials including chitin, hydrogels, calcium phosphates, biopolymers and anti-thrombotic coatings. Since many scaffolds for skin tissue engineering are biomimetically inspired, the book also has a strong focus on the biomimetics of tissue engineering in the repair of bone, skin, cartilage, soft tissue and specific organs.With its distinguished editor and international team of contributors, Biomimetic biomaterials is a standard reference for both the biomaterials research community and clinicians involved in such areas as bone regeneration, skin tissue and wound repair.

  • Bio-Tribocorrosion in Biomaterials and Medical Implants

    • 1st Edition
    • Yu Yan
    • English
    During their service life, most biomaterials and medical implants are vulnerable to tribological damage. In addition, the environments in which they are placed are often corrosive. The combination of triobology, corrosion and the biological environment has been named ‘bio-tribocorrosion’... Understanding this complex phenomenon is critical to improving the design and service life of medical implants. This important book reviews recent key research in this area.After an introduction to the topography of bio-tribocorrosion, Part one discusses different types of tribocorrosion including fatigue-corrosion, fretting-corrosion, wear-corrosion and abrasion-corrosion. The book also discusses the prediction of wear in medical devices. Part two looks at biological effects on tribocorrosion processes, including how proteins interact with material surfaces and the evolution of surface changes due to bio-tribocorrosion resulting from biofilms and passive films. Part three reviews the issue of bio-tribocorrosion in clinical practice, including dental applications and joint replacement as well the use of coatings and test methods for bio-tribocorrosion.W... its international team of contributors, Bio-tribocorrosion in biomaterials and medical implants is a standard reference for those researching and developing medical devices as well as clinicians in such areas as dentistry and orthopaedic surgery.

  • Lasers for Medical Applications

    Diagnostics, Therapy and Surgery
    • 1st Edition
    • Helena Jelínková
    • English
    Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery.Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar.With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering.

  • Handbook of Recycled Concrete and Demolition Waste

    • 1st Edition
    • F. Pacheco-Torgal + 1 more
    • English
    The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field.

  • Metals Reference Book

    • 5th Edition
    • Colin J. Smithells
    • English
    Metals Reference Book presents a convenient summary of data concerning to metallurgy. It discusses the guidance for dealing with laboratory accidents. It addresses the radioactive isotopes and radiation sources. Some of the topics covered in the book are the x-ray crystallography; excitation of x-rays; rotating crystal methods; powder methods; the wide angle method; the Laue method; the intensity of x-ray reflections; derivation of accurate unit cell dimensions in crystals; and the schoenflies system of point- and space-group notation. The Hermann-Mauguin system of point- and space-group notation is fully covered. The structures of metals, metalloids, and there compounds is discussed in detail. The text describes in depth the metallurgically important minerals. The metallic systems of unlimited mutual solubility are presented completely. A chapter is devoted to the respiratory syncytial virus. Another section focuses on the physical properties of molten salts. The book can provide useful information to mineralogists, chemists, students, and researchers.

  • Specialty Steels and Hard Materials

    Proceedings of the International Conference on Recent Developments in Specialty Steels and Hard Materials (Materials Development '82) Held in Pretoria, South Africa, 8-12 November 1982
    • 1st Edition
    • N. R. Comins + 1 more
    • English
    Specialty Steels and Hard Materials covers the proceedings of the International Conference on Recent Developments in Specialty Steels and Hard Materials (Materials Development '82). The main focus of the materials in the selection is on the microstructural detail, alloy design, processing technology, applications, and economic viability. The first part of the title presents the invited papers in the conference; this part includes topics such as toughness in high speed steels and hard metals; the use of vanadium in low alloy structural steels; and design of strong, ductile, duplex low alloy steels. The second part of the text covers topics about high strength low alloy steels, stainless steels, and rapid solidification processing. The last part of selection deals with tungsten carbide-cobalt hard metals, non-oxide ceramics, and sintered polycrystalline ultra-hard materials. The book will be of great interest to students, researchers, and practitioners of materials engineering and metallurgy.

  • Aluminum Alloys

    Structure and Properties
    • 1st Edition
    • L. F. Mondolfo
    • English
    Aluminum Alloys: Structure and Properties is a reference book that provides a concise description of the practical aspects of structures and properties of aluminum alloys. The book first covers the traits of pure and commercial aluminum, which include the composition, physical and thermal properties, and radiation. Next, the text covers the various classifications of aluminum alloys, such as binary, ternary, and commercial alloys. The text will be of great use to metallurgical engineers, inorganic chemists, and other researchers and practitioners who deal with aluminum and its alloys.

  • Extrusion

    The Definitive Processing Guide and Handbook
    • 2nd Edition
    • Harold F. Giles Jr + 2 more
    • English
    The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety.

  • Aluminum-Lithium Alloys

    Processing, Properties, and Applications
    • 1st Edition
    • N Eswara Prasad + 2 more
    • English
    Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering.

  • Materials

    Engineering, Science, Processing and Design; North American Edition
    • 3rd Edition
    • Michael F. Ashby + 2 more
    • English
    Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.els... The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design.

  • Bioceramics

    Proceedings of the 4th International Symposium on Ceramics in Medicine London, UK, September 1991
    • 1st Edition
    • W. Bonfield + 2 more
    • English
    Bioceramics is a collection of papers that deals in bioactive ceramics, glasses, and composites, focusing on the optimization of the implant-tissue interface. One paper discusses the osteogenic response of rat bone marrow cells in porous alumina, in hydroxyapatite, and in Kiel bone. Marrow cells loaded alumina and HA ceramics show new bone formation; Kiel bone use does not point to any consistent osteogenesis. Another paper presents the potential of an injectable form of Bioglass to treat urinary incontinence. When injected, it remains at the injection site by bonding to soft tissues without degrading, migrating, or producing an inflammatory reaction. Another paper presents an in vitro method that has shown osteoclast-like cells can resorb artificial calcium phosphate substrata in vitro. The differences in bone bonding mechanisms between surface active ceramics and resorbable ceramics show some chemical bonding and direct contact with the bone. The book also presents some clinical uses of bioactive ceramics such as the successful artificial root therapeutics involving 219 artificial roots implanted in 63 patients. This book can prove valuable to bio-chemists, cellular biologists, micro-biologists, developmental biologists, and scientists involved in biomaterials research.

  • Introduction to the Physical Metallurgy of Welding

    • 2nd Edition
    • Kenneth Easterling
    • English
    Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.

  • Nanotube Superfiber Materials

    Changing Engineering Design
    • 1st Edition
    • Mark Schulz + 2 more
    • English
    Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines.

  • Adsorption by Powders and Porous Solids

    Principles, Methodology and Applications
    • 2nd Edition
    • Jean Rouquerol + 4 more
    • English
    The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites.

  • Advanced Ceramics for Dentistry

    • 1st Edition
    • James Shen
    • English
    The growth of implant and fixed prosthodontics practices in dentistry has created a rapidly increasing demand for advanced ceramics and ceramic processes. Innovations in ceramics and ceramic processes are vital to ensure reliable and affordable dental-restoration solutions with aesthetically pleasing outcomes. The work aims to engage the bioceramics and engineering communities to meet the challenges of modern dental restoration using advanced ceramics. Incorporating fundamental science, advanced engineering concepts, and clinical outcomes, the work is suitable for bioceramicists, ceramics manufacturers, dental clinicians and biologists.

  • Modern Physical Metallurgy

    • 8th Edition
    • R. E. Smallman + 1 more
    • English
    Modern Physical Metallurgy describes, in a very readable form, the fundamental principles of physical metallurgy and the basic techniques for assessing microstructure. This book enables you to understand the properties and applications of metals and alloys at a deeper level than that provided in an introductory materials course.The eighth edition of this classic text has been updated to provide a balanced coverage of properties, characterization, phase transformations, crystal structure, and corrosion not available in other texts, and includes updated illustrations along with extensive new real-world examples and homework problems.

  • Texture Analysis in Materials Science

    Mathematical Methods
    • 1st Edition
    • H.-J. Bunge
    • English
    Texture Analysis in Materials Science Mathematical Methods focuses on the methodologies, processes, techniques, and mathematical aids in the orientation distribution of crystallites. The manuscript first offers information on the orientation of individual crystallites and orientation distributions. Topics include properties and representations of rotations, orientation distance, and ambiguity of rotation as a consequence of crystal and specimen symmetry. The book also takes a look at expansion of orientation distribution functions in series of generalized spherical harmonics, fiber textures, and methods not based on the series expansion. The publication reviews special distribution functions, texture transformation, and system of programs for the texture analysis of sheets of cubic materials. The text also ponders on the estimation of errors, texture analysis, and physical properties of polycrystalline materials. Topics include comparison of experimental and recalculated pole figures; indetermination error for incomplete pole figures; and determination of the texture coefficients from anisotropie polycrystal properties. The manuscript is a dependable reference for readers interested in the use of mathematical aids in the orientation distribution of crystallites.

  • Fibre Structure

    • 1st Edition
    • J. W. S. Hearle + 1 more
    • English
    Fibre Structure is a 19-chapter text that emerged from lectures presented at the Manchester College of Science and Technology. The interest of fiber studies lies to some extent in the important part textile materials play in general living and in industrial products and operations. The first chapters deal with the chemistry of fiber-forming polymers, followed by considerable chapters on the controversial subject of the fine structure of fibers. The remaining chapters describe the special features of all the important fibers, including glass and asbestos. Textile scientists, researchers, and manufacturers will find this book invaluable.

  • Carbon Nanotubes and Graphene for Photonic Applications

    • 1st Edition
    • Shinji Yamashita + 2 more
    • English
    The optical properties of carbon nanotubes and graphene make them potentially suitable for a variety of photonic applications. Carbon nanotubes and graphene for photonic applications explores the properties of these exciting materials and their use across a variety of applications.Part one introduces the fundamental optical properties of carbon nanotubes and graphene before exploring how carbon nanotubes and graphene are synthesised. A further chapter focusses on nonlinearity enhancement and novel preparation approaches for carbon nanotube and graphene photonic devices. Chapters in part two discuss carbon nanotubes and graphene for laser applications and highlight optical gain and lasing in carbon nanotubes, carbon nanotube and graphene-based fiber lasers, carbon-nanotube-base... bulk solid-state lasers, electromagnetic nonlinearities in graphene, and carbon nanotube-based nonlinear photonic devices. Finally, part three focusses on carbon-based optoelectronics and includes chapters on carbon nanotube solar cells, a carbon nanotube-based optical platform for biomolecular detection, hybrid carbon nanotube-liquid crystal nanophotonic devices, and quantum light sources based on individual carbon nanotubes.Carbon nanotubes and graphene for photonic applications is a technical resource for materials scientists, electrical engineers working in the photonics and optoelectronics industry and academics and researchers interested in the field.

  • Optical Thin Films and Coatings

    From Materials to Applications
    • 1st Edition
    • Angela Piegari + 1 more
    • English
    Optical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. Optical thin films and coatings provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas.Part one explores the design and manufacture of optical coatings. Part two highlights unconventional features of optical thin films including scattering properties of random structures in thin films, optical properties of thin film materials at short wavelengths, thermal properties and colour effects. Part three focusses on novel materials for optical thin films and coatings and includes chapters on organic optical coatings, surface multiplasmonics and optical thin films containing quantum dots. Finally, applications of optical coatings, including laser components, solar cells, displays and lighting, and architectural and automotive glass, are reviewed in part four.Optical thin films and coatings is a technical resource for researchers and engineers working with optical thin films and coatings, professionals in the security, automotive, space and other industries requiring an understanding of these topics, and academics interested in the field.

  • Organic Light-Emitting Diodes (OLEDs)

    Materials, Devices and Applications
    • 1st Edition
    • Alastair Buckley
    • English
    Organic light-emitting diodes (OLEDs) are opening up exciting new applications in the area of lighting and displays. OLEDs are self emissive and by careful materials and device design can generate colours across the visible spectrum. Together with simple monolithic fabrication on a range of different substrates, these diverse material properties give OLEDs key advantages over existing display and lighting technology. This important book summarises key research on materials, engineering and the range of applications of these versatile materials.Part one covers materials for OLEDs. Chapters review conjugated polymers, transparent conducting thin films, iridium complexes and phosphorescent materials. Part two discusses the operation and engineering of OLED devices. Chapters discuss topics such as highly efficient pin-type OLEDs, amorphous organic semiconductors, nanostructuring techniques, light extraction, colour tuning, printing techniques, fluorenone defects and disruptive characteristics as well as durability issues. Part three explores the applications of OLEDs in displays and solid-state lighting. Applications discussed include displays, microdisplays and transparent OLEDs, sensors and large-area OLED lighting panels.Organic light-emitting diodes (OLEDs) is a standard reference for engineers working in lighting, display technology and the consumer electronics sectors, as well as those researching OLEDs.

  • Handbook of Organic Materials for Optical and (Opto)Electronic Devices

    Properties and Applications
    • 1st Edition
    • Oksana Ostroverkhova
    • English
    Small molecules and conjugated polymers, the two main types of organic materials used for optoelectronic and photonic devices, can be used in a number of applications including organic light-emitting diodes, photovoltaic devices, photorefractive devices and waveguides. Organic materials are attractive due to their low cost, the possibility of their deposition from solution onto large-area substrates, and the ability to tailor their properties. The Handbook of organic materials for optical and (opto)electronic devices provides an overview of the properties of organic optoelectronic and nonlinear optical materials, and explains how these materials can be used across a range of applications.Parts one and two explore the materials used for organic optoelectronics and nonlinear optics, their properties, and methods of their characterization illustrated by physical studies. Part three moves on to discuss the applications of optoelectronic and nonlinear optical organic materials in devices and includes chapters on organic solar cells, electronic memory devices, and electronic chemical sensors, electro-optic devices.The Handbook of organic materials for optical and (opto)electronic devices is a technical resource for physicists, chemists, electrical engineers and materials scientists involved in research and development of organic semiconductor and nonlinear optical materials and devices.

  • Advances in Powder Metallurgy

    Properties, Processing and Applications
    • 1st Edition
    • Isaac Chang + 1 more
    • English
    Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas.Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials.Advance... in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field.

  • Semiconductor Gas Sensors

    • 1st Edition
    • Raivo Jaaniso + 1 more
    • English
    Semiconductor gas sensors have a wide range of applications in safety, process control, environmental monitoring, indoor or cabin air quality and medical diagnosis. This important book summarises recent research on basic principles, new materials and emerging technologies in this essential field.The first part of the book reviews the underlying principles and sensing mechanisms for n- and p-type oxide semiconductors, introduces the theory for nanosize materials and describes the role of electrode–semiconduc... interfaces. The second part of the book describes recent developments in silicon carbide- and graphene-based gas sensors, wide bandgap semiconductor gas sensors and micromachined and direct thermoelectric gas sensors. Part 3 discusses the use of nanomaterials for gas sensing, including metal oxide nanostructures, quantum dots, single-alled carbon nanotubes and porous silicon. The final part of the book surveys key applications in environmental monitoring, detecting chemical warfare agents and monitoring gases such as carbon dioxide.Semiconducto... gas sensors is a valuable reference work for all those involved in gas monitoring, including those in the building industry, environmental engineers, defence and security specialists and researchers in this field.

  • Silk

    Processing, Properties and Applications
    • 1st Edition
    • K. Murugesh Babu
    • English
    Silk is a natural, environmentally-frie... fibre with a remarkable range of properties, making it ideal for use in apparel and many other applications. Silk: Processing, properties and applications provides an authoritative reference on sericulture, silk fabric processing, silk properties and its applications.The book begins by looking at key aspects of sericulture, including the range of mulberry and non-mulberry species of silk worm, early and late stage rearing and harvesting of cocoons. Further chapters discuss reeling, weaving and spinning techniques as well as dyeing. The book also discusses the physical and chemical structure of silk as well as its mechanical and thermal properties. Concluding chapters discuss developments in applications and the properties of spider silk.Silk: Processing, properties and applications is useful for textile technologists, fibre scientists and all those with an interest in the characteristics of silk, its production and the varied uses of this important fibre.

  • Ceramic Nanocomposites

    • 1st Edition
    • Rajat Banerjee + 1 more
    • English
    Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials.

  • Corrosion and Conservation of Cultural Heritage Metallic Artefacts

    • 1st Edition
    • Volume 65
    • P Dillmann + 3 more
    • English
    The conservation of metallic archaeological and historic artefacts is a major challenge whether they are ancient bronzes or relics of our more recent industrial past. Based on the work of Working Party 21 Corrosion of Archaeological and Historical Artefacts within the European Federation of Corrosion (EFC), this important book summarises key recent research on analytical techniques, understanding corrosion processes and preventing the corrosion of cultural heritage metallic artefacts.After an introductory part on some of the key issues in this area, part two reviews the range of analytical techniques for measuring and analysing corrosion processes, including time resolved spectroelectrochemis... voltammetry and laser induced breakdown spectroscopy. Part three reviews different types of corrosion processes for a range of artefacts, whilst part four discusses on-site monitoring techniques. The final part of the book summaries a range of conservation techniques and strategies to conserve cultural heritage metallic artefacts.Corrosion and conservation of cultural heritage metallic artefacts is an important reference for all those involved in archaeology and conservation, including governments, museums as well as those undertaking research in archaeology and corrosion science.

  • Environmentally Friendly Polymer Nanocomposites

    Types, Processing and Properties
    • 1st Edition
    • Suprakas Sinha Ray
    • English
    Concerns about global warming and the depletion of oil reserves have led to significant research into more sustainable composite materials made from natural materials. Recently, research has focussed on the development of nanoscale reinforcements for this new group of composites, significantly improving and extending their range of desirable properties. Environmentally friendly polymer nanocomposites summarises this wealth of research and its practical implications.After an introduction to the subject, part one looks at matrix and reinforcement materials as well as their characterisation. Part two reviews key properties such as tensile and dynamic mechanical properties and thermal stability. It also considers issues such as barrier properties, biodegradability, rheology, electrical and thermal conductivity. The book concludes by reviewing potential applications.This book is ideal for polymer and material scientists, researchers and engineers. It will also help industrial researchers and R&D managers who want to bring advanced eco-friendly polymer composite-based products into the market.

  • Mechanisms of Flat Weaving Technology

    • 1st Edition
    • Valeriy V Choogin + 2 more
    • English
    To create an effective woven fabric a process engineer must choose the appropriate type of weaving machine and determine the particular parameters of the elastic system of fabric formation to be applied. It is also essential to know the purpose of all the mechanisms of the chosen type of weaving machine. This title provides an important, indispensable reference for both weaving specialists and students.Mechanisms of flat weaving technology introduces the reader to the classification of different types of weaving machines and the basic mechanisms involved, leading to a discussion of the principles and mechanisms of warp release (warp let-off), while also providing a description of the warp shed. The book reviews how the supply of weft is maintained on a weaving machine and describes the different methods of weft insertion used on weaving machines. Woven fabric formation is described alongside the characteristics of fabric take-up from the working area and its winding on the cloth beam. Later chapters describe safety (protective) devices provided on woven machines, and the different types of weaving machine driving and stopping mechanisms are presented. The authors then discuss ways of estimating the optimal parameters of weaving machine settings, whist describing methods for the evaluation of the quality and the quantity of the woven fabric produced. Finally, transportation of raw materials and outputs within the weaving factory are described. The book also includes an in-depth glossary and full bibliography.

  • Understanding the Tensile Properties of Concrete

    • 1st Edition
    • Jaap Weerheijm
    • English
    The response of concrete under tensile loading is crucial for most applications because concrete is much weaker in tension than in compression. Understanding the response mechanisms of concrete under tensile conditions is therefore key to understanding and using concrete in structural applications. Understanding the tensile properties of concrete summarises key recent research in this important subject.After an introduction to concrete, the book is divided into two parts: part one on static response and part two on dynamic response. Part one starts with a summary chapter on the most important parameters that affect the tensile response of concrete. Chapters show how multi scale modelling is used to relate concrete composition to tensile properties. Part two focuses on dynamic response and starts with an introduction to the different regimes of dynamic loading, ranging from the low frequency loading by wind or earthquakes up to the extreme dynamic conditions due to explosions and ballistic impacts. Following chapters review dynamic testing techniques and devices that deal with the various regimes of dynamic loading. Later chapters highlight the dynamic behaviour of concrete from different viewpoints, and the book ends with a chapter on practical examples of how detailed knowledge on tensile properties is used by engineers in structural applications.Drawing on the work of some of the leading experts in the field, Understanding the tensile properties of concrete is a valuable reference for civil and structural engineers as well as those researching this important material.

  • Informatics for Materials Science and Engineering

    Data-driven Discovery for Accelerated Experimentation and Application
    • 1st Edition
    • Krishna Rajan
    • English
    Materials informatics: a ‘hot topic’ area in materials science, aims to combine traditionally bio-led informatics with computational methodologies, supporting more efficient research by identifying strategies for time- and cost-effective analysis. The discovery and maturation of new materials has been outpaced by the thicket of data created by new combinatorial and high throughput analytical techniques. The elaboration of this "quantitative avalanche"—and the resulting complex, multi-factor analyses required to understand it—means that interest, investment, and research are revisiting informatics approaches as a solution. This work, from Krishna Rajan, the leading expert of the informatics approach to materials, seeks to break down the barriers between data management, quality standards, data mining, exchange, and storage and analysis, as a means of accelerating scientific research in materials science. This solutions-based reference synthesizes foundational physical, statistical, and mathematical content with emerging experimental and real-world applications, for interdisciplinary researchers and those new to the field.

  • Non-Destructive Evaluation (NDE) of Polymer Matrix Composites

    • 1st Edition
    • Vistasp M. Karbhari
    • English
    The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field.

  • Biopolymers: Reuse, Recycling, and Disposal

    • 1st Edition
    • Michael Niaounakis
    • English
    Biopolymers Reuse, Recycling and Disposal is the first book covering all aspects of biopolymer waste management and post-usage scenarios, embracing existing technologies, applications, and the behavior of biopolymers in various waste streams. The book investigates the benefits and weaknesses, social, economic and environmental impacts, and regulatory aspects of each technology. It covers different types of recycling and degradation, as well as life cycle analysis, all supported by case studies, literature references, and detailed information about global patents. Patents in particular—comprisin... 80% of published technical literature in this emerging field, widely scattered, and often available in Japanese only—are a key source of information. Dr. Niaounakis draws on disciplines such as polymer science, management, biology and microbiology, organic chemistry, environmental chemistry, and patent law to produce a reference guide for engineers, scientists and other professionals involved in the development and production of biopolymers, waste management, and recycling. This information is also valuable for regulators, patent attorneys and academics working in this field.

  • Advanced Mechanics of Composite Materials and Structural Elements

    • 3rd Edition
    • Valery V. Vasiliev + 1 more
    • English
    Advanced Mechanics of Composite Materials and Structural Elements analyzes contemporary theoretical models at the micro- and macro levels of material structure. Its coverage of practical methods and approaches, experimental results, and optimization of composite material properties and structural component performance can be put to practical use by researchers and engineers. The third edition of the book consists of twelve chapters progressively covering all structural levels of composite materials from their constituents through elementary plies and layers to laminates and laminated composite structural elements. All-new coverage of beams, plates and shells adds significant currency to researchers. Composite materials have been the basis of many significant breakthroughs in industrial applications, particularly in aerospace structures, over the past forty years. Their high strength-to-weight and stiffness-to-weight ratios are the main material characteristics that attract the attention of the structural and design engineers. Advanced Mechanics of Composite Materials and Structural Elements helps ensure that researchers and engineers can continue to innovate in this vital field.

  • Fundamentals of Femtosecond Optics

    • 1st Edition
    • S A Kozlov + 1 more
    • English
    Femtosecond optics involves the study of ultra-short pulses of light. Understanding the behaviour of these light pulses makes it possible to develop ultra-fast lasers with a wide range of applications in such areas as medical imaging, chemical analysis and micro-machining. Written by two leading experts in the field, this book reviews the theory of the interaction of femtosecond light pulses with matter, femtosecond lasers and laser systems, and the principles of femtosecond coherent spectroscopy of impurity amorphous media.

Related subjects