Skip to main content
Elsevier

Books in Materials science

The Materials Science portfolio includes titles covering core knowledge and new research and applications across the field: nanotechnology and nanomaterials; polymers and plastics; textiles; composites and ceramics; electronic, magnetic, and optical materials; metals and alloys; biomaterials; surface and film science and coating technologies; materials chemistry, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world application examples provide valuable, actionable insights for researchers, students, and the corporate sector. Elsevier's Materials Science portfolio places special attention on areas of current and emerging interest such as additive manufacturing / 3D printing, graphene and 2D materials, smart materials, biomimetics... The content in Elsevier's Materials Science titles program addresses core challenges facing science and society: sustainable energy technologies, the circular economy, health and human welfare.

  • Engineering Materials Volume 2

    An Introduction to Microstructures, Processing and Design
    • 2nd Edition
    • David R.H. Jones + 1 more
    • English
    Materials are evolving faster today than at any time in history. As a consequence the engineer must be more aware of materials and their potential than ever before. In comparing the properties of competing materials with precision involves an understanding of the basic properties of materials, how they are controlled by processing, formed, joined and finished and of the chain of reasoning that leads to a successful choice. This book will provide the reader with this understanding.Materi... are grouped into four classes: Metals, Ceramics, Polymers and Composites, and each are examined in turn. The chapters are arranged in groups, with a group of chapters to describe each of the four classes of materials. Each group first of all introduces the major families of materials that go to make up each materials class. The main microstructural features of the class are then outlined and the reader is shown how to process or treat them to get the structures (properties) that are wanted. Each group of chapters is illustrated by Case Studies designed to help the reader understand the basic material.This book has been written as a second level course for engineering students. It provides a concise introduction to the microstructures and processing of materials and shows how these are related to the properties required in engineering design.

  • Corrosion 2 Volume Set

    • 3rd Edition
    • G T Burstein + 2 more
    • English
    Corrosion science is probably unique in crossing the borders of almost all technologies and since 1963 `Corrosion' has been the leading source of information on the subject. It provides an encyclopedic coverage of corrosion science and technology and is an essential first point of reference for everyone in the field. The science has advanced significantly in the seventeen years since the publication of the second edition and this new edition has been thoroughly updated to reflect this.`Corrosion' is a two-volume reference work embracing a vast range of topics including high-temperature and aqueous corrosion and their control. It was first published in 1963 by George Newnes Ltd and over the years it has gained an international reputation. This edition extends to over 2700 pages, and contains 138 sections all written by specialists. It follows the format of previous editions, some sections have been completely rewritten, whilst others have been altered and extended. New sections have been added to cover areas not previously included. Lionel Shreir, who wrote the first two editions, has been joined by two editors, Ray Jarman and Tim Burstein, to produce this unique work. Although he did not live to see its publication it is hoped that this book serves as a fitting tribute to his memory.

  • Heat Pumps

    • 2nd Edition
    • D.B.A. Macmichael
    • David Reay
    • English
    A fully revised and extended account of the design, manufacture and use of heat pumps in both industrial and domestic applications. Topics covered include a detailed description of the various heat pump cycles, the components of a heat pump system - drive, compressor, heat exchangers etc., and the more practical considerations to be taken into account in their selection.

  • Laser Processing of Materials in Japan

    Research, Development and Applications
    • 1st Edition
    • Japan Technical Information Japan Technical Information Se
    • English
    Please note this is a short discount publication.Up until now, information on Japanese research efforts in the field of laser material processing has been difficult to collate - LASER PROCESSING OF MATERIALS IN JAPAN provides all this information in one exhaustive reference work.The report describes the various Japanese techniques for the creation of advanced materials by using laser-technology, and details the laser generation equipment being developed in Japan. Also provided are the names and addresses of principal Japanese workers in a variety of laser-processing fields, together with lists of the main Japanese research initiatives.

  • Advanced Materials 1991-1992

    I. Source Book
    • 1st Edition
    • J. Binner
    • English
    Advanced Materials 1991-1992, I. Source Book focuses on the properties, characteristics, reactions, applications, and composition of ceramics, composites, and plastics. The publication first elaborates on ceramics, including markets, materials, applications, processing, equipment, standards, health, safety, the environment, research initiatives, and industry news. Topics include joint ventures/agreements, powder processing, furnaces, bioceramics, electronics, superconductors, oxide films, silica, sensors, and superconductors. The manuscript also takes a look at composites, as well as markets, materials, applications, processing, non-destructive evaluation, testing, health, safety, and the environment, research initiatives, and industry news. Concerns include restructuring, takeovers and mergers, recycling, health and safety, test development, data generation, manufacturing processes, tooling, coatings, general engineering, aerospace, automotive, and boom in advanced composites. The book then ponders on plastics, including markets, materials, applications, processing, equipment, health, safety, the environment, and industry news. The publication is a valuable reference for readers interested in the properties, applications, processing, and composition of ceramics, composites, and plastics.

  • Inorganic Polymeric Glasses

    • 1st Edition
    • Volume 15
    • Richard C. Ropp
    • English
    The author describes a novel method of preparing hydrolysis-stable non-silicate glasses which is based on experimental work accomplished over the past twenty years. As such, the method is the beginning of a new approach to glass-making by the use of a molecularly-polymeri... precursor. The book elucidates the technical details required to produce such molecularly-polymeri... glasses from carefully prepared inorganic molecular monomers. Essentially, only silicate-based glasses have been known to be stable, whereas non-silicate glasses could not be attributed with such properties. Such glasses have, therefore, not found widespread usage in industry. The new phosphate glasses described here exhibit stabilities superior to many of the silicate glasses. For example, the nuclear-waste glass shows no measurable loss at all in boiling water, something entirely foreign to the zinc borosilicate glasses developed for nuclear waste encapsulation in the U.S. by Battelle-Northwest. The exceptional stability of the new glasses is achieved by selecting an inorganic compound capable of being polymerized, and then causing it to polymerize in a proper manner, in the absence of chain-stoppers. To obtain glasses equal or superior in hydrolysis stability to silicate-based systems it is imperative to employ molecular polymerization in situ, starting from carefully prepared precursors of exact stoichiometric proportion. Researchers in glass and glass properties will find this volume extremely useful and those involved in organic polymers will be intrigued by the similarities and disparities of the two systems.

  • Surface Treatment of Materials for Adhesive Bonding

    • 2nd Edition
    • Sina Ebnesajjad + 1 more
    • English
    Aimed at engineers and materials scientists in a wide range of sectors, this book is a unique source of surface preparation principles and techniques for plastics, thermosets, elastomers, ceramics and metals bonding. With emphasis on the practical, it draws together the technical principles of surface science and surface treatments technologies to enable practitioners to improve existing surface preparation processes to improve adhesion and, as a result, enhance product life. This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be an exhaustive overview, including more detailed explanation where necessary, in a continuous and logical progression. The book provides a necessary grounding in the science and practice of adhesion, without which adequate surface preparation is impossible. Surface characterization techniques are included, as is an up-to-date assessment of existing surface treatment technologies such as Atmospheric Plasma, Degreasing, Grit blasting, laser ablation and more. Fundamental material considerations are prioritised over specific applications, making this book relevant to all industries using adhesives, such as medical, automotive, aerospace, packaging and electronics. This second edition represents a full and detailed update, with all major developments in the field included and three chapters added to cover ceramic surface treatment, plasma treatment of non-metallic materials, and the effect of additives on surface properties of plastics.

  • Characterization in Silicon Processing

    • 1st Edition
    • Yale Strausser
    • English
    This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.

  • Data Book of Thermoset Resins for Composites

    Edition 1
    • 1st Edition
    • T.F. Starr
    • English
    Please note this is a Short Discount publication.Thermose... resins continue to remain the principal matrix of reinforced plastic composite components. Now you can refer to information on thermoset resins available around the world – in a single Data Book.The Data Book comes with a clear, standardised layout to compare between competitive resins. Each resin is listed alphabetically, first by country of manufacture, then by manufacturer. The use and application of each resin is clearly outlined.Contact details are readily and immediately available, making it easy to follow up information. Trade names, sales offices, local agents and main distributors are also provided.The Data Book also provides an understanding of the respective chemistry, properties, structure, curing mechanism and manufacture of each resin, under its appropriate classification – with sub–divisions by chemical type –acrylic, bismaleimides, bisphenols, epoxides, furans, phenolics, polyimides, polyesters or vinyl ester.With its carefully compiled address, telephone and facsimile number directory, the Data Book is an up–to–date source of readily available and complete information.Data Book of Thermoset Resins for Composites is required reading for all those concerned in any way with the manufacture, marketing, use and specification of thermoset resin based composites.

  • Thin Films for Emerging Applications

    • 1st Edition
    • Volume 16
    • Maurice H. Francombe
    • English
    Following in the long-standing tradition of excellence established by this serial, this volume provides a focused look at contemporary applications. High Tc superconducting thin films are discussed in terms of ion beam and sputtering deposition, vacuum evaporation, laser ablation, MOCVD, and other deposition processes in addition to their ultimate applications. Detailed treatment is also given to permanent magnet thin films, lateral diffusion and electromigration in metallic thin films, and fracture and cracking phenomena in thin films adhering to high-elongation substrates.

  • Corrosion Testing for Metal Finishing

    Institute of Metal Finishing
    • 1st Edition
    • V. E. Carter
    • English
    Corrosion Testing for Metal Finishing provides metal finishers with a range of test methods as well as guidance in the choice of method for a particular finish. There is a wide range of corrosion test methods available, the majority being the subject of Standard Specifications or being brought to Standards status. With many product Standards there is a choice of test methods available to met the Standard requirements. It is hoped that the relevant choice may be obtained more easily as a result of the information published in this book. The book outlines the apparatus and procedure for each test method and discusses its applicability to different metals and finishes. Indications are given of the nature and extent of the corrosion which develops in the test. Reference is also made to the relevant Standards for each test method. The book begins with a discussion of the basic requirements for corrosion testing of finished metal products. Subsequent chapters are devoted to testing procedures such as humidity tests, salt fog tests, industrial atmosphere test, porosity test, and anti-perspiration tests.

  • Cyclic Deformation and Fatigue of Metals

    • 1st Edition
    • Volume 78
    • M. Bílý
    • English
    An integral review is given in this book on the fatigue phenomenon covering the fundamentals of fatigue damage initiation, relevant factors influencing fatigue crack propagation and fatigue life, random load analysis, and simulation for theoretical and experimental fatigue life assessment. The entire chain of problems related to fatigue of metals and structural components is covered. Specifically, it describes the low-cycle plastic properties and statistically interprets the material stress reaction, examining original results of investigations on inelastic deformations under high cycle cyclic loading and correlating them with a number of use parameters. The limit states of bodies with primary defects and their resistance to fatigue crack propagation are discussed. Measurements, analysis and real-time modelling of operating loads for experimental fatigue life verification are reviewed as well as introducing some new fatigue damage accumulation hypotheses based on dissipated energy. Various operating and environmental factors of the fatigue life are analyzed, including temperature, metal structures, corrosive environment, stress-strain amplitudes and their changes, random load (strain) properties, stress gradient frequency, mean level, etc. The work is intended for all those involved in research and development in the metal, machine and structure fields.

  • Silica Glass and Its Application

    • 1st Edition
    • I. Fanderlik
    • English
    In terms of chemical composition, silica glass is the simplest amorphous substance that has been commercially utilized in many fields of application in a number of industrial branches, thanks to its physico-chemical properties.The present volume gives a comprehensive overview on the latest developments in glass technology. The influence of genetic types of raw materials on the choice of melting technology is discussed. Phase transformations of quartz-silica glass and the influence of the impurities of melting furnaces and furnace material is examined. The quartz raw materials suitable for the manufacture of clear, opaque and synthetic silica glasses, various manufacturing processes, the physico-chemical properties of silica glasses and their utilization in technological practice are reviewed in detail.The book provides a wealth of detailed information on the properties and use of silica glass which will be of considerable interest to workers in the glass industry, including those in research and development, as well as to people in the fields of electronics, electrical engineering, communication technology, optics and the chemical, power engineering and metallurgical industries. It will also be a useful information supplement on the properties and applications of silica glass for students in technical schools and universities.

  • Ceramics Drying

    • 1st Edition
    • R. W. Ford
    • English
    Describes the drying behaviour of clay-based and non-clay ceramics in terms of the external conditions influencing the rate of evaporation, and the internal mechanism with reference to moisture movement and shrinkage. The work mainly considers the practical aspects relating to problems and faults which arise during the drying of a preshaped article, although a theoretical treatment of the drying processes is provided for those requiring a deeper knowledge of this important subject.

  • Advanced Materials in Japan

    Source Book 1992
    • 1st Edition
    • COMLINE International COMLINE International Corp.
    • English
    Please note this is a Short Discount publication.Advanced Materials in Japan: Source Book 1992 offers the reader news of all the developments which have taken place over the last year. The Source Book is divided into chapters based on the divisions of news in New Materials in Japan – Metals & Alloys; Ceramics; Composites; Electronic & Optoelectronic Materials; Magnetic Materials; Plastics; Materials & The Environment; Medical Materials and Textiles, each introduced by an expert in these particular areas and discussing the implications of the information to non–Japanese industry.In addition, the Source Book includes a chapter devoted to business/market information – company mergers acquisitions etc., together with an overview of the Japanese approach to advanced materials and highlighting all major research initiatives, research programmes etc.

  • Smithells Metals Reference Book

    • 7th Edition
    • E A Brandes + 1 more
    • English
    Reviews of previous editions:'A publication of no equal that has become an essential reference during its 35 years of publication' ASLIB Book List'All metallurgists will covet a copy of Smithells' Chemistry and Industry'(It) provides an invaluable reference source for all workers, libraries and research laboratories in the field of engineering and metallurgy' BNF AbstractSmithells is the only single volume that provides all the data and references needed by those practicing metallurgy. The seventh edition of this standard reference work for metallurgists includes important new chapters on powder metallurgy and superconductivity. All chapters have been thoroughly revised to bring them up to date with developments since the last edition in 1983. In all this is the most complete compendium of information for industrial and theoretical metallurgists, and it is now available in a more accessible format including current data to 1997.Also available is Smithells Light Metals Handbook (ISBN 0750636254).

  • Polymers for Electronic & Photonic Application

    • 1st Edition
    • C. P. Wong
    • English
    The most recent advances in the use of polymeric materials by the electronic industry can be found in Polymers for Electronic and Photonic Applications. This bookprovides in-depth coverage of photoresis for micro-lithography, microelectronic encapsulants and packaging, insulators, dielectrics for multichip packaging,electronic and photonic applications of polymeric materials, among many other topics. Intended for engineers and scientists who design, process, and manufacturemicroelec... components, this book will also prove useful for hybrid and systems packaging managers who want to be informed of the very latest developments inthis field.

  • Organic Materials for Photonics

    Science and Technology
    • 1st Edition
    • G. Zerbi
    • English
    Polyconjugated organic materials are revealing amorphous electrical and non-linear optical properties; this fact is opening up a whole new field of Materials Science aimed at the development of new technologies. For many years inorganic materials were studied mostly for non-linear optical properties. When organic molecules began to show larger and faster responses, both physical chemists and organic chemists became involved in understanding the physical phenomena at a molecular level, with the hope of synthesizing new and better molecular systems. The non-linear optical responses of this class of organic materials are presently attracting considerable attention as an active field of research both in academic and industrial laboratories.Due to the variety of problems and techniques involved, students and beginners with different backgrounds who approach polyconjugated materials do not find it an easy field to enter. This book introduces in a comprehensive and tutorial way the necessary concepts and relevant references which will help the reader to grasp the fundamental concepts of polyconjugated organic materials and perceive the relations between them.

  • Mechanical Behaviour of Materials - VI

    Proceedings of the Sixth International Conference, Kyoto, Japan, 29 July - 2 August 1991
    • 1st Edition
    • M. Jono + 1 more
    • English
    Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.

  • Eurogel '91

    Progress in Research and Development of Processes and Products from Sols and Gels
    • 1st Edition
    • S. Vilminot + 2 more
    • English
    Eurogel '91 is the second conference to report on the developments in research and technology of European laboratories and industry. The volume focuses on the scientific and technological progress in the field, as well as providing a global overview of the latest developments. The fifty presented papers report on many new themes and research groups.Expansion in the utilization of the sol-gel process for new products and processes is developing steadily. Application requires an interdisciplinary effort beginning with application orientated fundamental research and ending up with engineering and technology. This interdisciplinary contact can be enhanced by closer cooperation between research and industry. In particular, potential users of innovative materials should become more aware of the possibilities connected with sol-gel technologies. At present the sol-gel process is considered as one of the most important technologies for developing innovative glasses, ceramics and composites. The contributions in this volume will be of interest to all those who are involved in the development potential of industrial and market needs.

  • Plastic Deformation of Materials

    Treatise on Materials Science and Technology, Vol. 6
    • 1st Edition
    • R. J. Arsenault
    • English
    Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Strength of Metals and Alloys (ICSMA 8)

    Proceedings of the 8th International Conference on the Strength of Metals and Alloys Tampere, Finland, 22-26 August 1988
    • 1st Edition
    • P. O. Kettunen + 2 more
    • English
    Containing almost 250 technical and review papers, these proceedings form an authoritative, state-of-the-art review of this important multidisciplinary topic. Emphasis is placed on the study of the strength of mechanical properties of materials and their dependence on the microstructure and defect arrangements. Areas covered include: dislocations; dislocation arrangements; plastic deformation; strengthening mechanisms; cyclic deformation and fatigue; plastic deformation at high temperatures; fracture; modern strengthening methods in steels; boundaries and interfaces.

  • Liquid Crystalline Polymers

    Proceedings of the International Workshop on Liquid Crystalline Polymers, WLCP 93, Capri, Italy, June 1-4 1993
    • 1st Edition
    • C. Carfagna
    • English
    The International Workshop on Liquid Crystalline Polymers (LCPs) held in June 1993 in Italy attracted many of the leading researchers in this area of polymer science. The meeting provided a forum for the exchange of research and ideas on current developments and future research and applications of liquid crystalline polymers.This volume consists of a selection of the best papers presented at the meeting covering synthesis and characterization, liquid crystalline thermosets, rheology, blends and composites containing LCPs and transport properties.

  • Joining of Advanced Materials

    • 1st Edition
    • Messler + 1 more
    • English
    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, and composites with polymeric, metallic, ceramic, intermetallic and carbon matrices in similar and dissimilar combinations. Suitable for undergraduate and graduate students in engineering in addition to practicing engineers, this book treats in detail mechanical joining with conventional and advanced fasteners or integral design features, adhesive bonding, fusion and non-fusion welding, brazing, soldering, thermal spraying, and synergistic combinations of weld-bonding, weld-brazing, rivet-bonding. In addition, the book addresses materials issues, joint design, production processing, quality assurance, process economics, and joint performance in service.

  • The Reinforced Plastics Handbook

    • 1st Edition
    • J. Murphy
    • English
    The Handbook of Reinforced Plastics is a complete and practical manual for specifying and selecting reinforced plastic products and services. The handbook covers all materials and classes of equipment currently available, with over 550 pages of editorial, illustrations and tables.

  • Geosynthetics in Filtration, Drainage and Erosion Control

    • 1st Edition
    • R.M. Koerner
    • English
    Geosynthetics can, and have, played a pivotal role in providing the primary functions of filtration, drainage and erosion control. Within each category this book counterpoints the design, testing and performance of the various materials against one another. The facilitation of filtration by a number of different woven and non–woven geotextiles is discussed. Design is centred around a balance between open voids [for adequate permeability] and closed voids [for proper soil retention]. This balance is compromised by long term clogging or soil loss from either the upstream soil particles or by the nature of the permeating fluid. This is a major focal area of the book.One solution to excessive filter clogging is to open up the geotextile's voids and allow sediments and micro–organisms in the permeating fluid to pass through. The challenge then becomes the design and potential clogging of the drain. The drainage aspect of geosynthetics is the second focal area.Erosion control is closely related to both filtration and drainage. The tremendous design problems, and equally large repair problems on all types of facilities, are addressed. Highway slopes, earth dams, landfill covers and solid waste daily covers are a few common situations.

  • Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy

    • 1st Edition
    • R.S. Salter + 2 more
    • English
    Describes current advances in metallurgical processes applied to gold extraction.

  • Mechanic and Dielectric Properties

    Advances in Research and Development
    • 1st Edition
    • Volume 17
    • Maurice H. Francombe
    • English
    Mechanic and Dielectric Properties deals with the mechanical and dielectric properties of thin films. Topics covered range from the deposition and mechanical properties of superlattice thin films to the preparation of hard coatings by sputtering and arc evaporation. The use of thin films in microwave acoustics is also discussed, along with ferroelectric films for integrated electronics and the physics, chemistry, and technology of electrochromic tungsten-oxide-based thin films. Comprised of five chapters, this volume begins with an analysis of the growth, characterization, and mechanical behavior of films comprising multilayers primarily of metal and refractory metallic compound components. The next chapter reviews the mechanical properties of hard coatings prepared by sputtering and arc evaporation, together with the influence of multilayer and gradient structures, and of film crystallinity, crystal orientation, and morphology, on properties such as hardness, coating smoothness, and friction behavior. Subsequent chapters focus on the unique role played by piezoelectric films in signal processing devices utilizing bulk or surface acoustic waves; the properties and applications of ferroelectric films in integrated electronics; and the underlying physics and chemistry of electrochromic tungsten-oxide-based thin films. This book should be of interest to physicists.

  • Mechanics of Material Interfaces

    Proceedings of the Technical Sessions on Mechanics of Material Interfaces Held at the ASCE/ASME Mechanics Conference, Albuquerque, New Mexico, June 23-26, 1985
    • 1st Edition
    • Volume 11
    • A.P.S. Selvadurai + 1 more
    • English
    The category of problems which examines the mechanical behaviour of contact regions constitutes an important branch of applied mechanics with extensive engineering applications. The results of such research can be applied to the study of mechanics of composite materials, tribology, soil-foundation interaction, mechanics of rock interfaces, modelling of damage phenomena and micro-mechanics. In classical studies, the modelling of interface responses has focussed on purely idealized forms of interface phenomena which range from frictionless contact to bonded contact, with Coulomb friction or finite friction occupying an intermediate position. Current research has attempted to improve such modelling by endowing the interface with its own characteristic constitutive responses. This research indicates the significant manner in which non linear, frictional, dilatant, hardening and softening interface constitutive responses can influence the global and local interface responses of engineering interest.The technical sessions held in New Mexico (sponsored by the Elasticity Committee of the Engineering Mechanics Division of the American Society of Civil Engineers) brought together new advances in the theoretical formulation, analysis and the application of material interface modelling to problems of engineering interest. This book contains the papers presented plus invited contributions from leading researchers.

  • Materials Handling in Pyrometallurgy

    Proceedings of the International Symposium on Materials Handling in Pyrometallurgy, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • C. Twigge-Molecey + 1 more
    • English
    This book which describes the world of metallurgical processing is influenced by a variety of factors not directly metallurgical. One major factor in all applications is materials handling. In Pyro-metallurgical processes, the processes are interconnected by materials handling systems which often require a major percentage of plant cost. The systems include sampling, storage, weighing, feeding and transporting of materials which all actively affect the performance of the metallurgical processes. Increasing productivity and improvements to plant environment demand that materials handling be improved. At the same time, sophisticated sampling and control systems are required to optimize the recipes and allow controlled reactions. By using handling technologies that accommodate both the process and the environment, sustainable improvements can be made.

  • Optical Characterization of Real Surfaces and Films

    Advances in Research and Development
    • 1st Edition
    • Volume 19
    • K. Vedam
    • English
    This new volume of the highly respected Physics of Thin Films Serial discusses inhomogeneity in real films and surfaces. The volume, guest-edited by K. Vedam, follows the growth of thin films both from the surface of the substrate, and from the atomic level, layer by layer. The text features coverage of Real-Time Spectroscopic Ellipsometry (RTSE) and Reflectance Anisotropy (RA), two major breakthrough optical techniques used to characterize real time and insitu films and surfaces. In six insightful chapters, the contributors assess the impact of these techniques, their strengths and limitations, and their potential for further development.

  • Radiation Damage of Structural Materials

    • 1st Edition
    • Volume 79
    • J. Koutský + 1 more
    • English
    Maintaining the integrity of nuclear power plants is critical in the prevention or control of severe accidents. This monograph deals with both basic groups of structural materials used in the design of light-water nuclear reactors, making the primary safety barriers of NPPs. Emphasis is placed on materials used in VVER-type nuclear reactors: Cr-Mo-V and Cr-Ni-Mo-V steel for RPV and Zr-Nb alloys for fuel element cladding.The book is divided into 7 main chapters, with the exception of the opening one and the chapter providing a phenomenological background for the subject of radiation damage. Chapters 3-6 are devoted to RPV steels and chapters 7-9 to zirconium alloys, analysing their radiation damage structure, changes of mechanical properties due to neutron irradiation as well as factors influencing the degree of their performance degradation. The recovery of damaged materials is also discussed. Considerable attention is paid to a comparison of VVER-type and western-type light-water materials.This monograph will be of great value to postgraduate students in nuclear engineering and materials science, and for designers and research workers in nuclear energy.

  • Metal Powders

    A Global Survey of Production, Applications and Markets
    • 1st Edition
    • J. Capus
    • English
    Please note this is a Short Discount publication.This in–depth market and technology report surveys the markets, applications and manufacturing processes for metal powders. Coverage is given to both ferrous and non–ferrous metal powders with the emphasis on the more commercially significant materials such as iron and steel, stainless and tool steels, copper and copper–base alloys, aluminium, tin and nickel. Current and future markets are reviewed from a global perspective: consumption figures are analyzed for the major economic zones: Northern America, Europe, Japan. The major factors likely to impact on future metal powder consumption are examined and forecasts are presented for the main categories to the end of the decade. The report is completed by a comprehensive global survey of the relevant activities of the major powder–producing companies and industry trade associations.

  • Graphite Fluorides

    • 1st Edition
    • Volume 8
    • N. Watanabe + 2 more
    • English
    This volume reviews the preparation, structures, physicochemical properties and applications of graphite fluorides, mainly based on the results obtained by the authors. Their interest in graphite fluorides stemmed from research on the ``anode effect'', in electrolytic production of fluorine gas in KF.2HF melt using carbon electrodes.The formation of a thin graphite fluoride film on carbon anodes made it difficult to continue the electrolysis of KF.2HF at a high current density. To elucidate this phenomenon studies on graphite fluoride were initiated. In the course of these systematic studies, the use of graphite fluoride in high-energy batteries became successful: a new graphite fluoride (C2F)n was found; and another fluorineographite intercalation compound with ionic bonding, CxF, was synthesized. During this research it was established that CxF is closely associated with the ``anode effect''.The book will be of interest to all those involved in the study and research of graphite fluorides, particularly fluorine chemists, electrochemists, and fluorine and battery companies.

  • F. Weinberg International Symposium on Solidification Processing

    Proceedings of the F. Weinberg International Symposium on Solidification Processing, Hamilton, Ontario, August 27-29, 1990
    • 1st Edition
    • J. E. Lait + 1 more
    • English
    This international symposium is in honour of Professor\F\Weinberg who will be retiring from the University of British Columbia this year, following a distinguished career. Six sessions have been organized on Fundamentals of Solidification, Non-ferrous Casting Processes, Continuous and Static Casting of Cast Iron, Novel Solidification Studies and Semiconductor and Optoelectronic Crystal Growth, addressing the state-of-the art in each of these areas. Keynote speakers for the six sessions are: Dr\K\Jackson, Dr\N\Bryson, Prof\H\A\Frederiksso... Prof\I\Minkoff, Prof\M\C\Flemings and Prof\R\Brown.

  • The Chemistry of Non-Sag Tungsten

    • 1st Edition
    • L. Bartha + 3 more
    • English
    Non-sag (NS) tungsten is a dispersion-strengthe... microalloy with elemental potassium, which is contained as microscopic bubbles in the tungsten lattice. Under working conditions in an incandescent lamp the potassium is a gas under high pressure. These gas bubbles essentially prevent the recrystallization of the tungsten wire and are responsible for the outstanding creep resistance of NS tungsten at the extremely high temperatures of a glowing lamp filament. More than 90% of NS tungsten is used for incandescent lamps. In addition, small amounts are used as defroster heating wires in automobile windshields and as heating wire coils for aluminium evaporation in metallization applications.The presented papers deal with the chemical reactions and the chemical compounds occurring along the path from tungsten raw materials to the final NS tungsten filament; a compendium of present knowledge on the different chemical aspects of NS tungsten manufacture is presented. It is composed of nine individual papers, each of them written by experts working in the field.

  • Metal-Ceramic Interfaces

    Proceedings of an International Workshop
    • 1st Edition
    • M. Rühle + 3 more
    • English
    As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomi... of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.

  • Solid State Electrochemistry and its Applications to Sensors and Electronic Devices

    • 1st Edition
    • Volume 45
    • K.S. Goto
    • English
    Based on the author's lecture notes for a course on Physical Chemistry of Oxides at High Temperatures held at the Graduate School of the Tokyo Institute of Technology, this book examines the micromechanism of migration of ions and electronic defects contained in solid and liquid oxides at high temperature.The book is primarily designed for use as a graduate-level text and includes 150 problems for students. The emphasis is on introduction of simple theories for transport properties of oxides, which can be universally used at low and high temperatures, for various combinations of oxides.

  • Diffusion Bonding of Materials

    • 1st Edition
    • N.F. Kazakov
    • English
    Diffusion Beading of Materials is an attempt to pool the experience in vacuum diffusion bonding accumulated by a number of mechanical engineering works, research establishments, and colleges. The book discusses the principal bonding variables and recommended procedures for diffusion bonding in vacuum; the equipment for diffusion bonding and production rate; and the mechanization and automation of equipment. The text also describes the diffusion bonding of steels; the bonding of cast iron and cast iron to steel; and the bonding of dissimilar metals and alloys. The bonding of refractory and active metals and their alloys; the bonding of high-temperature alloys, nickel and nickel alloys; and the bonding of cemented carbides and of a cemented carbide to steel are also considered. The book further tackles the repair and reconditioning by diffusion bonding; the bonding of porous materials; and diffusion metallurgy. The text also encompasses nonmetals and their joining to metals; quality control of diffusion-bonded joints; accident prevention; and cleanliness in vacuum diffusion bonding.

  • Fundamentals and Applications of Ternary Diffusion

    Proceedings of the International Symposium on Fundamentals and Applications of Ternary Diffusion, Hamilton, Ontario, Canada, August 27-28, 1990
    • 1st Edition
    • G. R. Purdy
    • English
    This international symposium held in honor of Professor J\S\Kirkcaldy, will comprise review and research papers covering both fundamental and applied aspects of ternary diffusion. Over twenty individual contributions by internationally recognized authorities in the field, will be included.

  • Advanced Materials 1991-1992

    II. Directory
    • 1st Edition
    • A. Fletcher
    • English
    Advanced Materials 1991-1992, II. Directory focuses on detailed information on the leading manufacturers, suppliers, and end-users of advanced materials and associated processing equipment. The directory first offers information on ceramics, as well as geographical index, company data, and materials product index. Countries mentioned include Australia, Belgium, Canada, France, and Germany. Corporations listed are Daimler Benz AG, Saint Gobian, Norton GmbH, Abar Ispen Industries, and Rath Keramikfaser GmbH. The publication then examines the geographical index, company data, and materials product index of composites. Countries listed include India, Italy, Japan, Spain, Sweden, and Switzerland. Companies mentioned include Amoco Chemical (Europe) SA, Kawasaki Steel, Monteidson, Albany International Research, and Agusta Spa. The book takes a look at the geographical index, company data, and materials product index of plastics. The directory is a helpful reference for readers interested in the manufacturers, suppliers, and end-users of advanced materials.

  • Integrated Optoelectronics

    • 1st Edition
    • Mario Dagenais
    • English
    Integrated optoelectronics is becoming ever more important to communications, computer, and consumer industries. It is the enabling technology in a variety of systems, ranging from low-cost, robust optical componentsin consumer electronics to high-performance broadband information networks capable of supporting video and multimedia conferencing. The requirements for producing low-cost, highly reliable components for deployment in these new systems have created a technology challenge. Integrated optoelectronics promises to meet the performance and cost objectives of these applications by integrating both optical and electronic components in a highly functional chip. This book provides an overview of this exciting newtechnology.Integr... Optoelectronics brings together a group of acknowledged experts from both universities and industry around the world to focus on a common theme of integration. These experts have reported not only on the state-of-the-art, but also on the physics and design experience that goes into implementing integrated chips and modules. This book is a cohesive series of articles that includes a discussion of the intimate trade-offs between materials, processes, devices, functional blocks, packaging,and systems requirements in a truly integrated technology. This integration encompasses electrical, optoelectronic, and optical devices onto monolithic or hybrid chips, and into multichip modules.This volume surveys state-of-the-art research activities in integrated optoelectronics and gathers most of the important references into a single place. It outlines the major issues involved in integrating both optical and electronic components, provides an overview of design and fabrication concepts, and discusses the issues involved in bringing these new chips to the marketplace.

  • Inorganic Fibres & Composite Materials

    A Survey of Recent Developments
    • 1st Edition
    • P. Bracke + 2 more
    • English
    A compendium of the current state-of-the-art in the technology of inorganic fibre manufacture and its use in the development of new high grade composite materials. Provides comprehensive information that is well in advance of industrial realization with invaluable insight relating to development and expected future trends. Specific entries are provided for the most important types of fibres known to date, each type discussed under manufacture, post-treatments, properties and uses. Also includes high quality photomicrographs, diagrams of the process techniques and molecular structures, bibliographical data, and helpful summaries in tabular form. Lists over 870 patent references.

  • Advances in Phase Transitions

    Proceedings of the International Symposium Held at McMaster University Ontario, Canada, 22-23 October 1987
    • 1st Edition
    • J. D. Embury + 1 more
    • English
    This book provides a record of the symposium held at McMaster University, Ontario, Canada, in honour of Professor J\S\Kirkaldy, and covers the recent progress being made in phase transformations, both experimental and theoretical, to facilitate the understanding of microstructural development. This volume includes new material on atomic modelling of phase transitions, descriptions of amorphous-crystallin... transitions, new data on motion of interfaces, elastic energy effects and pattern forming systems, as well as contributions from related disciplines such as thermodynamics, kinetics and the mechanics of solids.

  • Proceedings of the International Symposium on Electrometallurigical Plant Practice

    The Metallurgical Society of CIM Hydrometallurgy Section
    • 1st Edition
    • P. L. Claessens
    • English
    The Symposium covers most of the aspects of modern aqueous electrometallurgical practice, with a stronger emphasis on copper than zinc and nickel, which can be regarded as being the three major electrolytic metals. Of the minor electrolytic metals, there are contributions describing cobalt, lead and gold electrometallurgy, as well as the production of electrolytic manganese dioxide. The sessions divide neatly into modern copper tankhouse practice, purification techniques, modernization and automation, and new developments. A cross section of worldwide practice is represented, with a perhaps understandable concentration of Canadian operations. Plant tours to a modern zinc electrowinning operation, CEZ Inc at Valleyfield, and one of the world's largest copper refineries, Noranda Minerals, Inc., CCR Division in Montreal East, have been included as an integral part of the Symposium.

  • Compound Semiconductor Device Physics

    • 1st Edition
    • Sandip Tiwari
    • English
    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those interested in silicon devices. Each chapter ends with exercises that have been designed to reinforce concepts, to complement arguments or derivations, and to emphasize the nature of approximations by critically evaluating realistic conditions.

  • Bioceramics

    Proceedings of the 7th International Symposium on Ceramics in Medicine
    • 1st Edition
    • Ö.H. Andersson
    • English
    The primary forum for presentation of new work in the field of bioceramics is the annual International Symposium on Ceramics in Medicine. The chapters of this book represent the proceedings of the 7th meeting in this important series, held in Turku, Finland, in July 1994. The conference attracted a multidisciplinary audience from the bioceramics community, including leading academic and industrial scientists, manufacturers and regulators. The volume comprises 69 articles.

  • Concise Encyclopedia of Semiconducting Materials and Related Technologies

    • 1st Edition
    • S. Mahajan + 1 more
    • English
    The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layers are discussed in the volume and coverage is included of defects and their effects on device behavior. Metallization and passivation issues are also covered. Over 100 alphabetically arranged articles, written by world experts in the field, are each intended to serve as the first source of information on a particular aspect of electronic materials. The volume is extensively illustrated with photographs, diagrams and tables. A bibliography is provided at the end of each article to guide the reader to recent literature. A comprehensive system of cross-references, a three-level subject index and an alphabetical list of articles are included to aid readers in the abstraction of information.

  • Mechanics of Composite Materials

    A Unified Micromechanical Approach
    • 1st Edition
    • Volume 29
    • Jacob Aboudi
    • English
    In the last decade the author has been engaged in developing a micromechanical composite model based on the study of interacting periodic cells. In this two-phase model, the inclusion is assumed to occupy a single cell whereas the matrix material occupies several surrounding cells. A prominent feature of the micromechanical method of cells is the transition from a medium, with a periodic microstructure to an equivalent homogeneous continuum which effectively represents the composite material. Of great importance is the significant advantage of the cells model in its capability to analyze elastic as well as nonelastic constituents (e.g. viscoelastic, elastoplastic and nonlinear elastic), thus forming a unified approach in the prediction of the overall behaviour of composite material. This book deals almost exclusively with this unified theory and its various applications.

  • Ferrous and Non-Ferrous Alloy Processes

    Proceedings of the International Symposium on Ferrous and Non-Ferrous Alloy Processes, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • R. A. Bergman
    • English
    The Proceedings focus primarily on alloys used in the iron and steel industry. Operating papers discuss the production of stainless steel from nickel ore by combining the Krupp-Renn with the BOF process, the production of ferro-nickel by a novel electric furnace process and chromium containing iron in the BOF, as well as furnace lining problems in ferro alloy smelting. A number of papers deal with various aspects of ferro-manganese production and ferro-molybdenum. The use of engineered carbide desulphurizer and the application of innovative cored wire in steel making is highlighted. Studies into the production of titanium silicide and the process leading to the recovery of vanadium from Suncor flyash is presented. Results of experimental work dealing with the preparation of nickel chromium alloys from Bird River chromite and nickel sulphide are discussed.

Related subjects