Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Worked Examples in Basic Electronics

    • 1st Edition
    • P. W. Crane
    • N. Hiller
    • English
    Worked Examples in Basic Electronics provides information pertinent to the fundamental aspects of electronics. This book covers a variety of topics, including resistance–capacitan... coupled voltage amplifier, low-frequency amplification, radio-frequency amplification, transistors, oscillators, electron ballistics, and transmission lines. Organized into 11 chapters, this book begins with an overview of voltage amplification factor. This text then discusses the differences between the volt-ampere characteristic of an actual junction diode and that predicted by the equation. Other chapters consider the factors that affect the choice of the optimum load for a class A transformer-coupled power amplifier using a triode and a pentode. This book discusses as well the relative merits of two types of amplifier circuit commonly used as r.f. input stages. The final chapter deals with the two methods of producing a standing wave ratio of unity on a concentric feeder terminated with a load that is not equal to it characteristic impedance. This book is a valuable resource for engineers and technicians.

  • Electrical and Electronic Principles

    Volume 2
    • 2nd Edition
    • S. A. Knight
    • English
    Electrical and Electronic Principles, 2, Second Edition covers the syllabus requirements of BTEC Unit U86/329, including the principles of control systems and elements of data transmission. The book first tackles series and parallel circuits, electrical networks, and capacitors and capacitance. Discussions focus on flux density, electric force, permittivity, Kirchhoff's laws, superposition theorem, arrangement of resistors, internal resistance, and powers in a circuit. The text then takes a look at capacitors in circuit, magnetism and magnetization, electromagnetic induction, and alternating voltages and currents. Topics include phasors, addition and subtraction of sine waves, generator and motor principles, inductance of a coil, energy stored in an inductance, magnetization curves, magnetic hysteresis, and practical capacitor construction. The manuscript ponders on the elements of data transmission, principles of control systems, and instruments and measurements. Concerns include moving iron meter, measurement of resistance, automatic and temperature control, transmission methods, and channel capacity and encoding. The text is a vital reference for electrical and electronics engineers.

  • Bioastronautics and Electronics and Invited Addresses

    Proceedings of the Fifth Symposium on Ballistic Missile and Space Technology, Held in Los Angeles, California, in August, 1960
    • 1st Edition
    • Donald P. Legalley
    • English
    Ballistic Missile and Space Technology, Volume I: Bioastronautics and Electronics and Invited Addresses focuses on the advancements of processes, methodologies, and technologies involved in bioastronautics and electronics. The selection first underscores the importance of management in the ballistic missile and space vehicle programs, summary of the US achievements in space, and life and times of the crash program. The book then examines person-to-person communications in an atmosphere-free environment; genetics and the reliability of ecological systems; and earth viewer for exospheric navigation trainer. Discussions focus on star and sun simulation, mechanization, biological variation, system requirements, and research and development required. The publication takes a look at man protection during landing impact of aerospace vehicles; human experiments to determine human tolerance to landing impact in capsule systems; and gyro spin-axis bearing program at the General Motors Research Laboratories. Design analysis considerations for space vehicle attitude control; electronically steerable antenna for space vehicles; and estimates of accuracy of Atlantic missile instrumentation are also discussed. The selection is a valuable reference for astronauts and researchers interested in the relationship of bioastronautics and electronics.

  • Axial Flow Fans

    Design and Practice
    • 1st Edition
    • R. A. Wallis
    • English
    Axial Flow Fans: Design and Practice focuses on the design of axial flow fans and the practices involved in their applications. The manuscript first offers information on the fluid mechanics of ducted fans, boundary layer and skin friction relations, and aerofoil data for blade design. Discussions focus on flow deflection in cascade of aerofoils, pitching moment, lift, surface roughness in turbulent boundary layers, turbulent boundary layers in pressure gradients, laminar skin friction, viscosity and boundary layers, and similarity and non-dimensional numbers. The text then ponders on vortex flows in ducting and fan, ducts, and introduction to fan design methods. The book takes a look at the momentum and blade element considerations on free vortex flow of rotor and rotor losses. Topics include momentum considerations, profile drag, tip clearance losses, optimum conditions in terms of the flow and swirl coefficients, pressure relations and velocity vectors, and thrust and torque gradients. Tail fairing design and associated losses, overall efficiencies, torque, thrust, and power, and the design of fan unit with arbitrary vortex flow are also discussed. The publication is a dependable source of information for engineers and readers interested in the design of axial flow fans and practices involved in their operation.

  • Engineering and Commercial Functions in Business

    • 1st Edition
    • William Bolton
    • English
    Engineering and Commercial Functions in Business focuses on the relationship of engineering and commercial functions in business, as well as business functions, types of business, and activities of engineers in organizations. The monograph first elaborates on organizations, structure of organizations, and business functions. Discussions focus on communication interfaces, functional area activities, authority, organization structure, structuring and organization, and engineering organizations. The text also ponders on financial factors, cost elements, and budgetary control. Topics cover budgets, cost audits, preparing budgets, flexible budgets, elements of manufacturing costs, direct material and overhead costs, operational costs, and financial factors. The manuscript takes a look at forecasting and inventory control, including uses of forecasting, opinion gathering, correlation with related variables, economic order quantities, and finished good stocks. The text is a valuable source of information for researchers interested in engineering and commercial functions in business.

  • Progress in Combustion Science and Technology

    International Series of Monographs in Aeronautics and Astronautics, Vol. 1
    • 1st Edition
    • J. Ducarme + 2 more
    • English
    International Series of Monographs in Aeronautics and Astronautics, Division III: Progress in Combustion Science and Technology, Volume I focuses primarily on the aeronautical aspects of combustion. This book discusses the flow visualization techniques, chemical analysis in combustion chamber development, and aerodynamic influences on flame stability. The geometric-optical techniques in combustion research, flame quenching, and ignition in liquid propellant rocket engines are also elaborated. This text likewise covers the flow studies under combustion conditions, geometric optics of flames, and empirical studies of hypergolic rocket propellant ignition delays. This volume is a good reference for research students, scientists, and engineers conducting work in the field of combustion science and technology.

  • Newnes Guide to TV and Video Technology

    • 1st Edition
    • Eugene Trundle
    • English
    Newnes Guide to TV and Video Technology is a guide to TV and video technology and covers topics ranging from transmission and reception to color decoding, magnetic tape basics and video signals, and signal processing. Tips on care, operation, and maintenance of videotape recorders are given. Block diagrams are used throughout the book. Comprised of 21 chapters, this book begins with an overview of the basic principles of monochrome television, followed by a discussion on the light and color aspects of TV. The reader is then introduced to assembling a color TV outfit by triplicating the "basic" television system and assigning one primary color to each of the three; the principle of chroma encoding and the method of "dovetailing" the chroma and Y signals; transmission and reception; color decoding; and color display devices. VTR principles and circuits are explained in general terms, taking examples from all home formats to illustrate the techniques used. This monograph is aimed at interested laymen, students, and technicians and those in allied fields seeking an insight into the technicalities of TV and VTR practice.

  • The Design of Structures of Least Weight

    International Series of Monographs in Aeronautics and Astronautics: Solid and Structural Mechanics, Vol. 8
    • 1st Edition
    • H. L. Cox
    • R. L. Bisplinghoff + 1 more
    • English
    International Series of Monographs in Aeronautics and Astronautics, Division 1: Solid and Structural Mechanics, Volume 8: The Design of Structures of Least Weight focuses on the design of structures. This book reviews the considerations that determine the minimal structure weight and illustrates how these considerations may be expected to influence design. Topics discussed include the theory in design, structure loading coefficients and struts, wide struts, panels, and design of beams to transmit pure bending. The design of cantilevers, detail design of braced frames, basic theory of layout, and layout in practical design are also deliberated in this publication. This volume is recommended for design engineers and specialists intending to acquire knowledge of design structures of least weight.

  • 20 Solid State Projects for the Car & Garage

    • 1st Edition
    • R.M. Marston
    • English
    20 Solid State Projects for the Car & Garage focuses on solid-state construction projects for use in the car and the garage, including ice-warning indicator, emergency-light flasher, electronic tachometer, and over-heat indicator. The book first elaborates on the capacitor-discharge ignition system, automatic parking light operator, and windshield wiper pause controller. The text then examines lights-are-on reminder, multi-input panel light flasher, ice-warning indicator, and over-heat indicator. Topics include how these solid-state construction projects function, basic and electronic versions of the units, and their construction and use. The publication takes a look at low-fuel-level indicator, emergency-light flasher, lighting-fault indicator, and two-level brake lights. The text also reviews the spotlight time delay unit, suppressed-zero voltmeter, anti-sleep alarm, electronic tachometer, and self-regulating battery charger. The manuscript is a valuable source of information for researchers interested in solid state projects for cars and garages.

  • Re-Entry and Vehicle Design

    Proceedings of the Fifth Symposium on Ballistic Missile and Space Technology, Held in Los Angeles, California, in August, 1960
    • 1st Edition
    • Donald P. Legalley
    • English
    Ballistic Missile and Space Technology, Volume IV: Re-Entry and Vehicle Design focuses on the advancements of processes, methodologies, and technologies involved in re-entry and vehicle design, including hypersonics, material structures, propulsion, and communications. The selection first offers information on the pyrolysis of plastics in a high vacuum arc image furnace and aerothermodynamic feasibility of graphite for hypersonic glide vehicles. Discussions focus on aerothermochemical behavior of graphite, transient heat conduction, equilibrium glide trajectory, and apparatus and pyrolysis procedure. The text then takes a look at an engineering analysis of the weights of ablating systems for manned reentry vehicles and trajectories of lifting bodies entering planetary atmospheres at shallow angles. The manuscript ponders on propulsive control of atmospheric entry lifting trajectories, re-entry engineering mechanics, and rocket casing behavior predicted by laboratory tests. Topics include description of testing program, full-scale casing results, camera design, theoretical correlation, approximate thrust vector optimization, and propellant weight estimation. The selection is a dependable reference for astronauts and researchers interested in re-entry and vehicle design.

  • Stimulus and Response

    The Law of Initial Value
    • 1st Edition
    • Joseph Wilder
    • English
    Stimulus and Response: The Law of Initial Value provides an introduction to the study and application of the Law of Initial Value (L.I.V.). This book discusses the general considerations in the L.I.V. Organized into eight chapters, this book begins with an overview of the L.I.V. as a biological law since stimulus and response are common to all biology. This text then explains the discovery and study of the L.I.V., which originated in a study of the autonomic nervous system. Other chapters consider the role of L.I.V., which is important in any kind of non-specific therapy than in specific therapy and for the on-specific effects, often called "side-effects", of specific therapies. This book discusses as well a series of examples of the application of L.I.V. to physical stimuli. The final chapter deals with the social significance of L.I.V. This book is a valuable resource for psychologists, sociologists, scientists, pharmacologists, physiologists, neuropsychiatrists, and internists.

  • Natural Aerodynamics

    International Series of Monographs on Aeronautical Sciences and Space Flight: Aerodynamics, Vol. 1
    • 1st Edition
    • R. S. Scorer
    • English
    Natural Aerodynamics focuses on the mathematics of any problem in air motion. This book discusses the general form of the law of fluid motion, relationship between pressure and wind, production of vortex filaments, and conduction of vorticity by viscosity. The flow at moderate Reynolds numbers, turbulence in a stably stratified fluid, natural exploitation of atmospheric thermals, and plumes in turbulent crosswinds are also elaborated. This text likewise considers the waves produced by thermals, transformation of thin layer clouds, method of small perturbations, and dangers of extra-polation. This publication is suitable for mathematicians and experimentalists in natural aerodynamical research, but is also valuable to aviators, engineers, geographers, and meteorologists.

  • Boundary Layer and Flow Control

    Its Principles and Application
    • 1st Edition
    • G. V. Lachmann
    • English
    Boundary Layer and Flow Control: Its Principles and Application, Volume 2 focuses on the layer of fluid in the immediate area of a bounding surface where the effects of viscosity are substantial. This book is organized into two main topics—boundary layer control for low drag, and shock-induced separation and its prevention by design and boundary layer control. It specifically discusses the nature of transition, effect of two-dimensional and isolated roughness on laminar flow, and progress in the design of low drag aerofoils. The onset of separation effects for aerofoils and wings, shock-induced separation for laminar boundary layers, and shock-induced separation for laminar boundary layers are also deliberated. This volume is recommended to physicists and specialists interested in boundary layer and flow control.

  • Introduction to Rocket Technology

    • 1st Edition
    • V. I. Feodosiev + 1 more
    • English
    Introduction to Rocket Technology focuses on the dynamics, technologies, aerodynamics, ballistics, theory of servomechanisms, principles of navigation instruments, and electronics involved in rocket technology. The publication first takes a look at the basic relationships in the theory of reactive motion; types of jet propelled aircraft and their basic construction; and types of reaction motors and their construction. Discussions focus on air breathing motors, anti-aircraft rockets, long range bombardment rockets, surface to surface, short range bombardment missiles, thrust of a rocket motor, and operating efficiency of a rocket motor. The text then examines rocket motor fuels and processes in the combustion chamber of a rocket motor. The manuscript ponders on the flow of combustion products through the nozzle of a rocket motor and forces and moments acting on the rocket in flight. Topics include stabilizing and damping moments, steering forces, aerodynamic forces, properties of supersonic nozzle, gas flow in a supersonic nozzle, cooling of liquid rocket motors, and basic laws of gas flow. The book then elaborates on rocket flight trajectory, basic principles of stabilization and steering, and ground equipment and launching devices. The publication is a valuable source of information for engineers and researchers interested in rocket technology.

  • Random Vibration in Mechanical Systems

    • 2nd Edition
    • Stephen H. Crandall + 1 more
    • English
    Random Vibration in Mechanical Systems focuses on the fundamental facts and theories of random vibration in a form particularly applicable to mechanical engineers. The book first offers information on the characterization and transmission of random vibration. Discussions focus on the normal or Gaussian random process; excitation-response relations for stationary random processes; response of a single-degree-of-fre... system to stationary random excitation; wide-band and narrow-band random processes; and frequency decomposition of stationary random processes. The text then examines failure due to random vibration, including failure due to first excursion up to a certain level; fatigue failure due to a stationary narrow-band random stress process; failure due to an accumulation of damage; failure due to response remaining above a certain level for too great a fraction of the time; and failure mechanisms. The manuscript is a vital reference for mechanical engineers and researchers interested in random vibration in mechanical systems.

  • Lasers and Holography

    An Introduction to Coherent Optics
    • 1st Edition
    • Winston KOCK
    • English
    Science Study Series No. 39: Lasers and Holography: An Introduction to Coherent Optics focuses on the processes, methodologies, and techniques involved in optics, including wave diffraction and patterns, zone plates, holograms, and diffraction. The publication first ponders on holograms as wave patterns, coherence, and lasers. Topics include reflectors and resonators, natural line width, semiconductor lasers, reflectors and spatial coherence, energy conservation with reflectors, frequency coherence and stability, coherent waves from small sources, photographic grating, and properties of waves. The book then tackles wave diffraction, as well as diffraction by two and multiple slits, near field, multiple slit gratings and photographic gratings, refraction by prisms, dependence of diffraction on wavelength, and disks and zone plates. The manuscript reviews the properties of holograms and zone plates. Discussions focus on holograms and coherent radar, single wavelength nature of holograms, image inversion, reconstruction with a small portion of a hologram, pseudoscopy in the real image of a hologram, zone plates as negative lenses, offset zone plates, and zone plates with areas interchanged. The text is a dependable reference for researchers interested in coherent optics.

  • Motor Vehicle Mechanic's Textbook

    • 5th Edition
    • F. K. Sully
    • English
    Motor Vehicle Mechanic's Textbook, Fifth Edition is a textbook on the maintenance and repair of motor vehicles that balances theory and practice. Topics covered range from engine principles and components to maintenance of the lubrication, cooling, and fuel systems. Safety in the motor vehicle workshop is also considered. Comprised of 24 chapters, this book begins with an overview of calculations and scientific principles relevant to motor vehicle maintenance and repair, followed by a discussion on equipment necessary for satisfactory engineering drawing. The reader is then introduced to the structure of the motor vehicle; suspension; and the front-wheel assembly. Subsequent chapters focus on carburation; the compression-ignition engine; the electrical, ignition, and charging and starting systems; clutch and gearbox; automatic transmission; universal joints; final drive and differential; and rear-wheel assembly. This monograph is intended for mechanics and will also prove useful to those engaged in the maintenance, repair, and overhaul sections of the motor industry, as well as to motorists who wish to know more about their vehicles.

  • Fuels and New Propellants

    Proceedings of the Conference Held in Milan by Federazione Associazioni Scientifiche e Tecniche and Sponsored by Consiglio Nazionale delle Ricerche
    • 1st Edition
    • Corrado Casci
    • English
    Fuels and New Propellants is a compendium of papers presented at a conference on Fuel and New Propellants by the Federazione Associazioni Scientifiche e Tecniche, sponsored by the Consiglio Nazionale Delle Ricerche, held at Milan, Italy in June 1963. The book presents the researches made on the scientific, technical, and industrial applications of new and improved fuels and propellants. The collection contains papers that deal with residual fuels and the marine diesel engine; the characteristics of processes for the production of high octane fuels; liquid and solid propellants for space rockets; and technical problems in the production of solid and liquid propellants. Petrochemists, chemists, and researchers in the field of fuels and propellants will find this text interesting and insightful.

  • The Tuberculous Process

    A Conception and a Therapy
    • 1st Edition
    • Alfred Leitch
    • English
    The Tuberculous Process: A Conception and a Therapy provides a close investigation of the symptoms and physical signs commonly found in tuberculosis. This book discusses the method and actions adopted by the tubercle bacillus. Organized into 14 chapters, this book begins with an overview of a working conception of tuberculosis and the nature of the bacillary products. This text then discusses the methods of investigating the changes that substances undergo in the animal body. Other chapters consider the chemical bodies formed in tuberculosis that may be divided into two groups, namely, bacillary products and tissue products. This book discusses as well symptomatology in tuberculosis and the manifestation occurring in the alimentary tract as a result of infection by the tubercle bacillus. The final chapter describes several cases in detail and the results following the treatment employed. This book is a valuable resource for physiologists, clinicians, health workers, and research workers.

  • Group 15. Mechanics of Fluids

    Vocabulary of Mechanics in Five Languages: English/German/French/Polish/Russian, Vol. 2
    • 1st Edition
    • A. T. TroskolaÅ„ski
    • English
    Vocabulary of Mechanics, Volume 2: Group 15. Mechanics of Fluids provides information pertinent to the fundamental aspects of the mechanics of fluids. This book covers a variety of topics, including fluid mechanics, hydrostatics, aeromechanics, gas dynamics, aeroelasticity, and dynamic meteorology. Organized into two parts encompassing 95 sections, this volume begins with an overview of the branch of mechanics dealing with the phenomena of fluids in motion and at rest. This text then deals with the geometrical description of the flow of matter, irrespectively of the forces producing the motion. Other sections consider the instantaneous motion of a fluid element wherein the motion is composed of translation of the center of mass of a fluid element. This book discusses as well the relative equilibrium of liquids. The final section deals with the atmospheric air motion caused by several factors. This book is a valuable resource for engineers, scientists, and research workers.

  • The Reminiscences of a Civil Engineering Contractor

    • 1st Edition
    • Robert Brodie
    • English
    The Reminiscences of a Civil Engineering Contractor provides an account of the various engineering works of Robert Brodie, a civil engineer. This book covers several engineering projects, including Tay Bridge Railways, Montrose and Arbroath Railway, Scarborough and Whitby Railway, Mersey Railway, Loch Katrine aqueduct, Peterhead Harbor improvement, and Fraserburgh Harbor improvement. Organized into two parts encompassing 16 chapters, this book begins with an overview of the Tay Bridge work. This text then discusses the construction of the missing link of the East Coast route between Arbrouth and Kinaber junction, including rock cuttings and extensive viaducts. Other chapters consider the various contracts at Swansea. This book discusses as well the establishment of the Federation of Civil Engineering Contractors in 1919. The final chapter deals with other contracts, including railways, docks, roads, reservoirs, pipe tracks, and catchment board improvements all over Wales and England. This book is a valuable resource for civil engineers.

  • Marine Electrical Practice

    Marine Engineering Series
    • 6th Edition
    • G. O. Watson
    • English
    Marine Engineering Series: Marine Electrical Practice, Sixth Edition focuses on changes in the marine industry, including the application of programmable electronic systems, generators, and motors. The publication first ponders on insulation and temperature ratings of equipment, protection and discrimination, and AC generators. Discussions focus on construction, shaft-drive generators, effect of unbalanced loading, subtransient and transient reactance, protection discrimination, fault current, measurement of ambient air temperature, and basis of machine ratings. The text then examines AC switchgear, automatic voltage regulators, DC generators, and DC switchgear. Topics cover switchgear for parallel-operated generators, protection against short-circuit, field regulators and the effect of tropical temperatures, compound-wound generators, power generators, loading sharing, voltage comparison circuit, and amplifier and condition circuit. The manuscript surveys electric cables, motors, motor control gear, semiconductors, storage batteries, and battery control gear. Concerns include calculations to determine the size of battery required, types of storage batteries, rectifiers, tunnel diodes, maintenance of control gear, overload protection, insulation, sheathing, and flexible cords and cables. The publication is a dependable reference for marine engineers and researchers interested in marine engineering.

  • The Bending and Stretching of Plates

    International Series of Monographs on Aeronautics and Astronautics: Solid and Structural Mechanics, Vol. 6
    • 1st Edition
    • E. H. Mansfield
    • R. L. Bisplinghoff + 1 more
    • English
    The Bending and Stretching of Plates deals with elastic plate theory, particularly on small- and large-deflexion theory. Small-deflexion theory concerns derivation of basic equations, rectangular plates, plates of various shapes, plates whose boundaries are amenable to conformal transformation, plates with variable rigidity, and approximate methods. Large-deflexion theory includes general equations and some exact solutions, approximate methods in large-deflexion theory, asymptotic large-deflexion theories for very thin plates. Asymptotic theories covers membrane theory, tension field theory, and inextensional theory. The book explains stress-strain relations, effect of forces in the plane of the plate, and rectangular plates that have all edges simply supported, or where plates that have all edges clamped. The text also considers plates of constant thickness whose boundaries are circular, sector-shaped, elliptical, or triangular. Muskhelishvili (1933) addresses boundary value problems of plane stress using analytical methods of the biharmonic equation. The book also investigates some approximate methods of analysis of large-deflexion behavior of plates of constant thickness where there is either a uniformly distributed load, or a compressive load in the plane of the plate in excess of that necessary to cause initial buckling. The book explains that the engineer can use the principle of minimum potential energy to investigate large deflexion of plates. The text is suitable for structural engineers in civil, mechanical or marine engineering, as well as to structural research workers and students.

  • Space Trajectories

    A Symposium Sponsored by the American Astronautical Society, the Advanced Research Projects Agency, and Radiation Incorporated
    • 1st Edition
    • The Technical Staff, Research Division, + 1 more
    • English
    Space Trajectories covers the proceedings of a symposium sponsored by the American Astronautical Society, Advanced Research Projects Agency, and Radiation Incorporated, held on December 14-15, 1959. The book focuses on the field of trajectory analysis, including orbital and trajectory computations, tracking of satellites, and the use of computer programs in space missions. The selection first tackles satellite and probe orbit determination, general survey of the field, and astrodynamics, as well as theoretical, computational, and operational problems, application to lunar orbits, and contributions of satellite observations. The book then examines trajectory constants and trajectory computation and optimization. Discussions focus on the classical method of orbital computation, effect of uncertainty on interplanetary orbits, masses, diameter, and flattening of planets, and determination of the physical constants of the moon. The manuscript takes a look at trajectory computation and optimization, trajectory computation in systems design, and computer programs for space missions. Topics include simulation and targeting programs, satellite tracking methods, direct numerical integration, classical methods of orbital computation, and references on trajectory computation and optimization. Space-born computer design, space maneuvers, and re-entry trajectories and problems of hypersonic flow are also mentioned. The selection is a valuable source of data for astronauts and readers interested in space trajectories.

  • Engineering Fundamentals and Environmental Effects

    • 1st Edition
    • H. Liebowitz
    • English
    Fracture: An Advanced Treatise, Volume III: Engineering Fundamentals and Environmental Effects provides information pertinent to the engineering fundamentals and environmental effects pertaining to various types of fracture. This book focuses on the fracture design of structures as well as the engineering fundamentals of fracture and environmental effects. Organized into 12 chapters, this volume begins with an overview of the analytical aspects of linear fracture mechanics, which are complete relative to basic formulation and two-dimensional static problems. This text then reviews the fundamental equations of the statics of solids, with emphasis on the idealization of behavior into elastic, plastic, or viscoelastic types. Other chapters consider a notch analysis of fracture. This book discusses as well the three phases of the fracture process. The final chapter deals with environment cracking under static load. This book is a valuable resource for engineers, students, and research workers in industrial organizations, education and research institutions, and various government agencies.

  • Advances in Magnetohydrodynamics

    Proceedings of a Colloquium Organized by the Department of Fuel Technology and Chemical Engineering at Sheffield University, October 1961
    • 1st Edition
    • I. A. McGrath + 2 more
    • English
    Advances in Magnetohydrodynamics is a collection of papers that deals with the MHD process such as the fundamental properties of gases passing through magnetic fields, estimates of performance of different MHD systems, and pilot plant investigations. One paper investigates the role that both electrons and positive ions play in the processes occurring in an MHD generator during the braking of the gas stream. Another paper discusses the motion of a partially ionized gas through a magnetic field by considering the macroscopic equations of motion of the individual component gases consisting of neutrals, ions, and electrons. A high electron temperature can occur under conditions of low pressure and high acceleration (rapid expansion) of flowing plasma, such as can happen in forms of magnetoplasmadynamic electrical power generator. One paper examines any occurrence and effects of electron temperature (which is higher than the gas temperature) on ionization, electrical conductivity, and on ion-electron recombination process under these conditions. The paper concludes that the elevated electron temperature effect is not significant in practical devices such as those found in the d.c. transverse magnetic field arrangement of an electrical power generator. The collection can prove useful for mathematicians, students, or professors in advanced mathematics or physics. Engineers or technicians interested in power generation and regulation will find the collection valuable.

  • Basic Digital Signal Processing

    Butterworths Basic Series
    • 1st Edition
    • Gordon B. Lockhart + 1 more
    • English
    Basic Digital Signal Processing describes the principles of digital signal processing and experiments with BASIC programs involving the fast Fourier theorem (FFT). The book reviews the fundamentals of the BASIC program, continuous and discrete time signals including analog signals, Fourier analysis, discrete Fourier transform, signal energy, power. The text also explains digital signal processing involving digital filters, linear time-variant systems, discrete time unit impulse, discrete-time convolution, and the alternative structure for second order infinite impulse response (IIR) sections. The text notes the importance of the effects of analogue/digital interfaces, of the aspects such as sampling and quantization of the analogue input, as well as the reconstruction of an analogue output from the processed digital signal. Digital filter design consists of two separate operations: 1) approximation—the determination of a realizable system function from some idealized 'target'; and 2) realization—the formulation of a signal flow graph and its implementation in hardware or software. Digital signal processing employs the FFT, a number of efficient algorithms that compute the discrete Fourier transform and the inverse discrete Fourier transform. The programmer can run the FFT methods using some BASIC programs. The book can prove useful for programmers, computer engineers, computer technicians, and computer instructors dealing with many aspects of computers such as networking, engineering or design.

  • Position Sensing

    Angle and Distance Measurement for Engineers
    • 1st Edition
    • Hans Walcher
    • English
    Position Sensing: Angle and Distance Measurement for Engineers focuses on the electrical measurement of angles and distances. The publication first elaborates on industrial principles and sensors and measurement systems. Discussions focus on measurement technology, terms used in information technology, methods of measurement, analogue angle and displacement sensors, features of processes using a digital-incremental measurement base, electromechanical position sensing systems, and capacitive scanning. Carrier frequency scanning, electromagnetic pulse generator, photoelectric position sensing systems, distance measurement by the pulse-time delay method, laser gyroscope, and systems with analogue measurement and subsequent analogue-to-digital conversion are also discussed. The manuscript then examines intelligent sensors and connection of measurement systems. Topics cover electrical couplings for fine and coarse measurement systems, mechanical links for converting longitudinal to angular motion, general properties of intelligent sensors, and interconnection of intelligent sensors. The text is highly recommended for mechanical engineers and measurement and control technicians.

  • Electronic Measurement Techniques

    • 1st Edition
    • D. F. A. Edwards
    • English
    Electronic Measurement Techniques provides practical information concerning the techniques in electronic measurements and a working knowledge on how to adopt and use the appropriate measuring instruments. SI units are used as the unit of measurement in the book. The text contains chapters focusing on a variety of measurement techniques. The initial chapter discusses the system of measurements and principles used in electronic measurements. Subsequent chapters cover instruments for direct current measurement, electronic voltmeters, methods for the measurement of alternating currents and potential differences, and measurement of power. Chapters are also devoted to the elaboration of the construction of standards for comparison purposes and the measurement of non-electrical quantities. Engineers will find the book very useful.

  • Microelectronic Systems N3 Checkbook

    • 1st Edition
    • R E Vears
    • English
    Microelectronic Systems N3 Checkbook, Level 3 provides further coverage of the Business and Technician Education Council (BTEC) unit in Microelectronic Systems N (syllabus U86/333), and aims to extend the range of hardware, software, and interfacing techniques developed at level NII. The book takes a look at microcomputer bus systems, interrupts, and logic families. Discussions focus on further and worked problems on logic families, worked problems on interrupts and microcomputer bus systems, and main points concerned with microcomputer bus systems. The text then ponders on semiconductor memories and interfacing devices. Topics include worked problems on interfacing devices, main points concerned with interfacing devices and semiconductor memories, and further problems on semiconductor memories. The text reviews signal degradation and assembly language problems, including main points concerned with signal degradation and assembly language programs and worked problems on assembly language programs and signal degradation. The book is a valuable source of data for researchers interested in microelectronic systems.

  • Practical Birth Control

    Being a Revised Version of Safe Marriage
    • 1st Edition
    • Ettie Rout
    • English
    Practical Birth Control provides information pertinent to the practical methods of birth control. This book presents a general outline of the reproductive organs of man and woman. Organized into 10 chapters, this book begins with an overview of the legal and religious aspects of marriage. This text then presents the precautions against impregnation and explains the two methods of preventing fertilization, namely, the chemical and mechanical methods. Other chapters consider the suitable cases for sterilization of women, including mental stability, hereditary taints, tuberculosis, syphilis, and repeated pregnancies that are undermining the sound health and economics of the home. This book discusses as well the purpose of human marriage as distinguished from the sexual union. The final chapter deals with the various birth control methods. This book is a valuable resource for readers who are interested in practical birth control methods.

  • Newnes Microprocessor Pocket Book

    • 1st Edition
    • Steve Money
    • English
    Newnes Microprocessor Pocket Book explains the basic hardware operation of a microprocessor and describes the actions of the various types of instruction that can be executed. A summary of the characteristics of many of the popular microprocessors is presented. Apart from the popular 8- and 16-bit microprocessors, some details are also given of the popular single chip microcomputers and of the reduced instruction set computer (RISC) type processors such as the Transputer, Novix FORTH processor, and Acorn ARM processor. Comprised of 15 chapters, this book discusses the principles involved in both parallel and serial input-output interfaces and gives details of the common standards used for parallel and serial input-output systems. Although discrete logic can be used for input-output interfaces, most microprocessor-based systems use specially developed integrated circuits for this purpose. Examples of these special interface chips are described with details of their internal arrangement and the basic techniques for programming their modes of operation. This covers parallel and serial input-output chips, counters and timers as well as one or two of the multifunction peripheral chips that are available. Data formats, instruction sets, display systems, and system development are also considered. This monograph will be of interest to students and to anyone involved in designing, servicing, or just wishing to learn more about microprocessor-based systems.

  • Progress in Refrigeration Science and Technology

    Proceedings of the XIth International Congress of Refrigeration, Munich, 1963
    • 1st Edition
    • Sam Stuart
    • English
    Progress in Refrigeration Science and Technology, Volume II is a collection of papers from the Eleventh International Congress of Refrigeration held in Munich in August-September 1963. These papers deal with the various scientific and technical aspects, designs, and technology of refrigeration used in food, as well as advances in air-conditioning, and heat pumps. One paper discusses the refrigeration of meat, fruit, or vegetables, and the reaction rate of proteolysis in low temperatures. The paper points out that meat preservation by freezing is not economical below 60 degrees centigrade citing the reason that cathepsines are still catalytically active in lower temperatures. Other papers discuss the effects of freezing of beef, pork, turkey, chicken, sweet corn, spinach puree. As regards fruit and vegetable storage, the air needs to be purified to inhibit infections, retard fungal or bacterial growth, and dissipate ripening gases or foul odors. Another paper examines the reasons for doing away with floor insulation in refrigeration plants used in storing fresh meat during the summer and winter months. This collection is suitable for engineers in the area of refrigeration, and also for food technologists involved in food research and preservation.

  • The Theory of Recycle Processes in Chemical Engineering

    International Series of Monographs on Chemical Engineering, Vol. 3
    • 1st Edition
    • M. F. Nagiev
    • P. V. Danckwerts
    • English
    The Theory of Recycle Processes in Chemical Engineering deals with the theory and methods related to dynamic (flow) systems and with the processes in static systems with recycles, The book investigates complex recycle processes through the use of concepts and examples. The development and refinement of chemical technology involves processes that are purely chemical or technological in nature. The technological approach consists in the design of industrial processes where chemical reaction occurs with minimum by-products, and with the maximum useful employment of each unit of catalyst surface and reaction space. The book explores effective systems for the complex processing of chemical raw materials using the technological approach. The text reviews the elementary principles of the theory of recycle process through derivation of equations for simple recycling processes where one or more chemical reactions occur in a single medium or reactor in which the reactions happen consecutively, or in a parallel manner. The book also explains how the investigator can determine the technologically-opti... characteristics of the reaction unit employing five steps. The text will benefit industrial chemists, researchers, technical designers, and engineers, whose works are related with chemistry and recycling.

  • Plant Biotechnology

    Biotechnology
    • 1st Edition
    • Shain-dow Kung + 1 more
    • English
    Plant Biotechnology provides an introduction to the fundamental life processes and reviews topics relevant to plant biotechnology. This book discusses the manipulation of biological systems to solve practical problems in industry or agriculture. Organized into four parts encompassing 18 chapters, this book begins with an overview of the fundamental techniques essential to plant biotechnology. This text then describes the various aspects of the regulation of gene expression in plants and reviews the molecular architecture of plant genes. Other chapters consider chloroplast genome from various organisms and present the practical examples of the significance and uses of biotechnology in crop improvement. This book discusses as well the methods for inducing plant gene expression in heterologous prokaryotic and eukaryotic systems. The final chapter deals with the potential for using gene transfer technology for crop improvement. This book is a valuable resource for plant physiologists, biochemists, plant scientists, genetic engineers, and evolutionary biologists.

  • The Kybernetics of Natural Systems

    A Study in Patterns of Control
    • 1st Edition
    • D. Stanley-Jones + 1 more
    • English
    The Kybernetics of Natural Systems: A Study in Patterns of Control provides an elementary account of linear feedback systems in which the correction of an error of performance is numerically proportional to that error itself. This book examines the nonlinear processes, which is of great importance for the understanding of controlled processes in the living organism. Organized into seven chapters, this book begins with an overview of the elementary propositions of kybernetics that are keys to the understanding of a great many patterns of working in psychology and physiology. This text then examines the interplay of dynamic and control during the process of childbirth. Other chapters consider the kybernetic description of a physiological sequence, which differs from the pattern of the reflex arc. This book discusses as well the axioms and principles of kybernetics. The final chapter deals with the laws of kybernetics. This book is a valuable resource for physiologists.

  • American Ultraminiature Component Parts Data 1965-66

    Pergamon Electronics Data Series
    • 1st Edition
    • G. W. A. Dummer + 1 more
    • English
    American Ultraminiature Component Parts Data 1965-66 provides data on a comprehensive selection of the very smallest electronic component parts available from manufacturers in the United States. This book presents the increasing trend towards the utilization of high density packaging and microelectronic techniques. Organized into 31 chapters, this book begins with an overview of the general features of the Honeywell GG322 Solid-State Accelerometer. This text then presents the general data of the Atlas Microminiature Piston Actuator, an explosive-actuated device for producing linear motion. Other chapters consider the characteristics of micro-sized Hypercon capacitors, which are designed to meet the need for tiny capacitors in low-voltage circuits such as are used in hearing aids, ultra-miniature electronic gear, etc. This book discusses as well the features of Sprague Cera-Mite disc capacitors for use in low-voltage transistorized circuitry. This book is a valuable resource for readers concerned with the design and engineering of high density electronic equipment.

  • Components for Pneumatic Control Instruments

    The Static and Dynamic Characteristics of Pneumatic Resistances, Capacitances and Transmission Lines
    • 1st Edition
    • L. A. Zalmanzon
    • English
    Components for Pneumatic Control Instruments: The Static and Dynamic Characteristics of Pneumatic Resistances, Capacitances and Transmission Lines provides a list of problems necessitating a detailed study of the characteristics of restrictions and chambers. This book discusses the problems that arise during the development, improvement, and use of pneumatic instruments. Organized into four chapters, this book begins with an overview of the theory and design of restrictions. This text then considers the main characteristics of restriction processes, giving the features of the restrictions used in different pneumatic control and regulating instruments. Other chapters deal with the static characteristics of pneumatic chambers with restrictions of various types. This book discusses as well problems of the dynamics of pneumatic chambers. The final chapter deals with the characteristics of log pneumatic lines and of systems with distribution parameters. This book is a valuable resource for aircraft engineers and readers who wish to understand the problems of the theory and design of elements of pneumatic control and regulating instruments.

  • Imperfections and Active Centres in Semiconductors

    International Series of Monographs on Semiconductors, Vol. 6
    • 1st Edition
    • R. G. Rhodes
    • Heinz K. Henisch
    • English
    Imperfections and Active Centres in Semiconductors discusses principles of semiconduction theory in terms of the band model, and electrical properties as regards chemical or physical defects in the lattice structures. The book reviews the fundamental concepts of semiconductor crystals, semiconduction, silicon, and the atomic lattice of germanium. The Frenkel defect accounts for displaced atoms in the lattice that move into spaces between normal atom positions. The text describes dislocations or line defects, the motion and generation of dislocations, as well as the geometry of the dislocations in the diamond. Honrstra (1958), who shows the geometry of the dislocation structures through a diagram, also describes the geometry of more complicated types of dislocation in the diamond lattice. The book explains X-ray diffraction and crystal imperfections in which the amount of X-radiation reflected from a crystal specimen depends on the perfection or on the atomic structure of the reflecting planes. The electron microscope can reveal more detail in higher resolution, for example, the actual arrangement of the molecules around an edge dislocation has been exposed in a platinum phthalocyanine crystal. The book also describes the fabrication of semiconductor devices where the crystals are cut with an abrasive saw and then ground with fine abrasive. The text can be used by physicists, engineers, or technologists in the allied fields of solid state physics and materials engineering.

  • Medical Electronic Laboratory Equipment 1967-68

    Pergamon Electronics Data Series
    • 1st Edition
    • G. W. A. Dummer + 1 more
    • English
    Medical Electronic Laboratory Equipment 1967-68 provides information of a comprehensive range of electronic and nucleonic equipment for use in laboratories concerned with all branches of medical research. This book covers a variety of topics, including amplifiers, computers, chromatographs, gamma encephalographs, display systems, kidney function systems, scintillation cameras, and ultrasonic equipment. Organized into 10 chapters, this book begins with an overview of a wide-section of the equipment available in the specialized field. This text then provides general descriptive data of equipment with considerable operating and applications information. Other chapters consider a large number of illustrations showing equipment in use, as well as the case histories, analyses, and references. This book presents as well data from Europe, United States, and Japan that are useful as a practical guide and manual by all concerned with the acquisition, assessment, and use of electronic equipment for medical research. This book is a valuable resource for readers interested in acquiring medical electronics equipment.

  • Progress in Refrigeration Science and Technology

    Proceedings of the XIth International Congress of Refrigeration, Munich, 1963
    • 1st Edition
    • Sam Stuart
    • English
    Progress in Refrigeration Science and Technology, Volume I is a collection of papers from the Eleventh International Congress of Refrigeration held in Munich in August-September 1963. These papers deal with the various scientific and technical aspects, designs, and technology of refrigeration. One paper explains technological advances in the use of very low temperature fluids, namely liquid hydrogen and liquid helium as rocket fuels, as bubble chambers, in the study of mesons or hyperons, and in experiments involving the reaction of metals in a wide range of temperature. Another paper examines the requirements for improved food refrigeration and the limitations of certain methods when compared to other cold processing forms. Freeze-drying is also used in biology such as in freeze-drying of biological solutions, tissues, or living organisms. One paper explains the purification method for obtaining very pure hydrogen at high pressures to be used in comparative experiments on the thermodynamical properties of ortho- and para-hydrogen, and their mixtures. Another paper investigates the effect of heat exchange between capillary tube and suction line on the performance of small hermetic compressor systems. This collection is suitable for engineers or technologists in the area of refrigeration, as well as for scientists involved in the space industry and materials research.

  • Theory of Jets in Ideal Fluids

    • 1st Edition
    • M. I. Gurevich
    • English
    Theory of Jets in Ideal Fluids focuses on the use of hydrodynamics in the theory of jets in ideal fluids. The publication first offers information on the introduction to the theory of plane and steady jet flows and flow from a vessel. Discussions focus on flow from a rectangular vessel with an orifice at a corner; vessel with a funnel-shaped bottom and Borda's nozzle; flow from the opening between two flat plates; and Kirchhoff's method. The text then examines infinite flow past a polygonal obstacle, flow around curvilinear obstacles, and flow around a body at small cavitation number. Topics include cavitating flow around a circular cylinder; cavitating flow around a thin profile at an arbitrary angle of attack; cavitating flow around a flat plate; Villat's integro-differential equation and the existence and uniqueness of the solution; and flow past a plate with the separation from its upper surface. The book takes a look at the flow of a heavy fluid and the effects of surface tension, axisymmetric flow, jet flow of compressible fluid, and unsteady flows. The publication is a dependable reference for hydrodynamicists wanting to explore the theory of jets in ideal fluids.

  • Progress in Refrigeration Science and Technology

    Proceedings of the XIth International Congress of Refrigeration, Munich, 1963
    • 1st Edition
    • Sam Stuart
    • English
    Progress in Refrigeration Science and Technology, Volume III is a compilation of papers presented during the 11th International Congress of Refrigeration, held at Munich, Germany in 1963. This volume is divided into three parts discussing various aspects of refrigeration science and technology. Part I deals with refrigerated transport by land and by air. This part is further divided into sections that cover refrigerated vehicles, testing of equipment for refrigerated vehicles, and the transport of foods. The second part is about refrigerated transport by water, with sections covering subjects on marine air-conditioning and fishing boats. Part III tackles education in the area of refrigeration. Research and education in refrigeration locker plants and education in refrigeration are elucidated under this section. Mechanical engineers and those concerned in the production, transport, and manufacturing of perishable goods will find great use of this book.

  • An Introduction to Gastro–Enterology

    The Mechanics of the Digestive Tract
    • 4th Edition
    • Walter C. Alvarez
    • English
    The Mechanics of the Digestive Tract, Fourth Edition: An Introduction to Gastro-Enterology provides information pertinent to the mechanics of the digestive tract. This book reviews the various explanations for the downward progress of intestinal waves. Organized into 34 chapters, this edition begins with an overview of the main types of activity in the small bowel. This text then explains the nature of the polarity and the location of the mechanism that produces it. Other chapters consider the duodenal tonus contraction in which the wave seems to originate generally appears a few seconds before a gastric wave reaches the pylorus. This book discusses as well the polarity of the bowel that caused every contraction ring to spread caudad as soon it formed. The final chapter provides a list of books that are likely to be helpful to readers who are starting on their lifework in the fields of gastro-enterology and gastro-intestinal physiology. This book is a valuable resource for students, teachers, physicians, and research workers.

  • Stability and Control

    Flight Testing
    • 2nd Edition
    • Courtland D. Perkins
    • English
    Flight Testing, Volume II: Stability and Control focuses on the development of adequate flight test techniques for the appraisal of stability and control characteristics and flying qualities of airplanes. This book discusses the flying quality requirements, longitudinal motions, and flight determination of stick-fixed neutral points. The determination of aerodynamic parameters from steady maneuvering, desirable control characteristics in steady flight, and various forms of lateral control surfaces are also elaborated. This publication likewise covers the measurement of maximum lift coefficient, emergency anti-spin devices, and concept of the altitude-Mach number flight envelope. This volume is recommended for design, development or research engineers, test pilots, and instrumentation personnel interested in airplane stability and control.

  • Renewable Energy System Design

    • 1st Edition
    • Ziyad Salameh
    • English
    The limitation of fossil fuels has challenged scientists and engineers to search for alternative energy resources that can meet future energy demand. Renewable Energy System Design is a valuable reference focusing on engineering, design, and operating principles that engineers can follow in order to successfully design more robust and efficient renewable energy systems. Written by Dr. Ziyad Salameh, an expert with over thirty years of teaching, research, and design experience, Renewable Energy System Design provides readers with the "nuts and bolts" of photovoltaic, wind energy, and hybrid wind/PV systems. It explores renewable energy storage devices with an emphasis on batteries and fuel cells and emerging sustainable technologies like biomass, geothermal power, ocean thermal energy conversion, solar thermal, and satellite power. Renewable Energy System Design is a must-have resource that provides engineers and students with a comprehensive yet practical guide to the characteristics, principles of operation, and power potential of the most prevalent renewable energy systems.

  • Apertures

    • 1st Edition
    • R. C. Hansen
    • English
    Microwave Scanning Antennas, Volume I: Apertures is a comprehensive account of phased arrays, multiple beam arrays, time domain and synthetic apertures, and adaptive antennas. Advances in continuous apertures and near field theory are discussed. Low noise and monopulse apertures, optical scanners, and large radomes are also covered, along with radio astronomy instruments and associated theory. Comprised of five chapters, this volume begins with an overview of aperture theory as well as aperture distributions and near field theory. The second and third chapters deal with mechanically steered and electronically scanned antennas, including monopulse antennas and optical scanners. The fourth chapter is devoted to radio astronomy instruments and techniques and encompasses both apertures and arrays, together with radio telescopes and antennas. The final chapter describes large radomes that are primarily used with aperture antennas. This book is intended for engineers who must understand narrow beam or high resolution antennas more deeply than from the system interfaces alone, and for undergraduate and graduate students in electronics who wish to complement their study of electromagnetics with the quantitative details of hardware applications.

  • Cell Separation

    Methods and Selected Applications
    • 1st Edition
    • Thomas G. Pretlow + 1 more
    • English
    Cell Separation: Methods and Selected Application, Volume 3 provides information pertinent to the design and application of methods for the separation of cells. This book covers a variety of topics, including lymphoma cells, lectins, purification of cells from lung tumors, macrophage electrophoretic migration test, tissue heterogeneity, and characteristics of cultured cells. Organized into 13 chapters, this volume begins with an overview of the approaches in examining particular cell-surface properties and their role in the metastatic process. This text then examines lectins as important tools for identification and separation of cells, particularly of lymphocyte subpopulations. Other chapters consider the various methods that have been used to disperse rat pituitary tissue into single cells. This book discusses as well the different methods for isolating type II cells. The final chapter deals with the significance of having cell cultures homogeneous for a given cell type. This book is a valuable resource for cell biologists, experimental oncologists, hematologists, immunologists, and endocrinologists.

  • The Mathematical Foundations of the Finite Element Method with Applications to Partial Differential Equations

    • 1st Edition
    • A. K. Aziz
    • English
    The Mathematical Foundations of the Finite Element Method with Applications to Partial Differential Equations is a collection of papers presented at the 1972 Symposium by the same title, held at the University of Maryland, Baltimore County Campus. This symposium relates considerable numerical analysis involved in research in both theoretical and practical aspects of the finite element method. This text is organized into three parts encompassing 34 chapters. Part I focuses on the mathematical foundations of the finite element method, including papers on theory of approximation, variational principles, the problems of perturbations, and the eigenvalue problem. Part II covers a large number of important results of both a theoretical and a practical nature. This part discusses the piecewise analytic interpolation and approximation of triangulated polygons; the Patch test for convergence of finite elements; solutions for Dirichlet problems; variational crimes in the field; and superconvergence result for the approximate solution of the heat equation by a collocation method. Part III explores the many practical aspects of finite element method. This book will be of great value to mathematicians, engineers, and physicists.

  • Microprocessor Data Book

    • 2nd Edition
    • S. A. Money
    • English
    Microprocessor Data Book, Second Edition focuses on the available types of microprocessors and microcomputers, including description of internal architecture, instruction set, main electrical data, and package details of these instruments. The book first elaborates on 4-bit and 8-bit microprocessors and microcomputers. Discussions focus on Advanced Micro Devices Am2900 series, Hitachi HMCS40 series, Motorola MC6801 and MC6803, Motorola MC6809 series, Rockwell R6500/1 series, and RCA 1800 series. The text then examines 16-bit and 32-bit microprocessors and microcomputers. Topics include Intel 80286 microprocessor, Motorola 68010, Texas Instruments TMS9980, Zilog Z8000 series, Motorola 68020 processor, and National 32032. The manuscript takes a look at other support devices, peripheral device controllers, and serial I/O devices, including Motorola MC6850 ACIA, Texas Instruments TMS9902 ACC, Thomson EFCIS EF9365/6, and floppy disk controllers. The publication is a valuable source of information for computer science experts and researchers interested in microprocessors and microcomputers.

Related subjects