Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Silicon-On-Insulator (SOI) Technology

    Manufacture and Applications
    • 1st Edition
    • O. Kononchuk + 1 more
    • English
    Silicon-On-Insulator (SOI) Technology: Manufacture and Applications covers SOI transistors and circuits, manufacture, and reliability. The book also looks at applications such as memory, power devices, and photonics. The book is divided into two parts; part one covers SOI materials and manufacture, while part two covers SOI devices and applications. The book begins with chapters that introduce techniques for manufacturing SOI wafer technology, the electrical properties of advanced SOI materials, and modeling short-channel SOI semiconductor transistors. Both partially depleted and fully depleted SOI technologies are considered. Chapters 6 and 7 concern junctionless and fin-on-oxide field effect transistors. The challenges of variability and electrostatic discharge in CMOS devices are also addressed. Part two covers recent and established technologies. These include SOI transistors for radio frequency applications, SOI CMOS circuits for ultralow-power applications, and improving device performance by using 3D integration of SOI integrated circuits. Finally, chapters 13 and 14 consider SOI technology for photonic integrated circuits and for micro-electromechani... systems and nano-electromechanic... sensors. The extensive coverage provided by Silicon-On-Insulator (SOI) Technology makes the book a central resource for those working in the semiconductor industry, for circuit design engineers, and for academics. It is also important for electrical engineers in the automotive and consumer electronics sectors.

  • Damages on Pumps and Systems

    The Handbook for the Operation of Centrifugal Pumps
    • 1st Edition
    • Thomas Merkle
    • English
    Damage on Pumps and Systems. The Handbook for the Operation of Centrifugal Pumps offers a combination of the theoretical basics and practical experience for the operation of circulation pumps in the engineering industry. Centrifugal pumps and systems are extremely vulnerable to damage from a variety of causes, but the resulting breakdown can be prevented by ensuring that these pumps and systems are operated properly. This book provides a total overview of operating centrifugal pumps, including condition monitoring, preventive maintenance, life cycle costs, energy savings and economic aspects. Extra emphasis is given to the potential damage to these pumps and systems, and what can be done to prevent breakdown.

  • Finite Element Analysis and Design of Steel and Steel–Concrete Composite Bridges

    • 1st Edition
    • Ehab Ellobody
    • English
    In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book’s seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components.

  • Micro- and Nanoengineering of the Cell Surface

    • 1st Edition
    • Jeffrey M Karp + 1 more
    • English
    Micro- and Nanoengineering of the Cell Surface explores the direct engineering of cell surfaces, enabling materials scientists and chemists to manipulate or augment cell functions and phenotypes. The book is accessible for readers across industry, academia, and in clinical settings in multiple disciplines, including materials science, engineering, chemistry, biology, and medicine. Written by leaders in the field, it covers numerous cell surface engineering methods along with their current and potential applications in cell therapy, tissue engineering, biosensing, and diagnosis. The interface of chemistry, materials science, and biology presents many opportunities for developing innovative tools to diagnose and treat various diseases. However, cell surface engineering using chemistry and materials science approaches is a new and diverse field. This book provides a full coverage of the subject, introducing the fundamentals of cell membrane biology before exploring the key application areas.

  • III-V Microelectronics

    • 1st Edition
    • J.P. Nougier
    • English
    As is well known, Silicon widely dominates the market of semiconductor devices and circuits, and in particular is well suited for Ultra Large Scale Integration processes. However, a number of III-V compound semiconductor devices and circuits have recently been built, and the contributions in this volume are devoted to those types of materials, which offer a number of interesting properties. Taking into account the great variety of problems encountered and of their mutual correlations when fabricating a circuit or even a device, most of the aspects of III-V microelectronics, from fundamental physics to modelling and technology, from materials to devices and circuits are reviewed. Containing contributions from European researchers of international repute this volume is the definitive reference source for anyone interested in the latest advances and results of current experimental research in III-V microelectronics.

  • Handbook of Fire and Explosion Protection Engineering Principles

    for Oil, Gas, Chemical and Related Facilities
    • 3rd Edition
    • Dennis P. Nolan
    • English
    Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author’s life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses.

  • Fluorescence Assay in Biology and Medicine

    • 1st Edition
    • Sidney Udenfriend
    • Bernard Horecker + 2 more
    • English
    Molecular Biology: An International Series of Monographs and Textbooks: Fluorescence Assay in Biology and Medicine, Volume II covers the many applications of fluorescence and phosphorescence. This book discusses the principles of fluorescence polarization, comparison of luminescence methods of analysis, and direct measurement of fluorescence decay times. The photodecomposition, sulfhydryl compounds, determination of primary structure, and fluorescent staining are also deliberated. This text likewise covers the assay of purines in nucleic acid hydrolyzates, formyltetrahydrofola... synthetase, and ovarian hormones. This volume is valuable to chemists, physicists, and biophysicists intending to use fluorescence in studying reaction mechanisms and elucidate the structure of complex biopolymers.

  • Friction Stir Superplasticity for Unitized Structures

    A volume in the Friction Stir Welding and Processing Book Series
    • 1st Edition
    • Zongyi Ma + 1 more
    • English
    This book describes the fundamentals and potential applications of ‘friction stir superplasticity for unitized structures’. Conventional superplastic forming of sheets is limited to the thickness of 3 mm because the fine grained starting material is produced by rolling. Friction stir superplasticity has grown rapidly in the last decade because of the effectiveness of microstructural refinement. The thickness of the material remains almost constant, and that allows for forming of thick sheets/plates, which was not possible before. The field has reached a point where designers have opportunities to expand the extent of unitized structures, which are structures in which the traditional primary part and any supporting structures are fabricated as a single unit. With advanced optimization and material considerations, this class of structures can be lighter weight and more efficient, making them less costly, as well as mechanically less complex, reducing areas of possible failure.

  • A Cost Effective Use of Computer Aided Technologies and Integration Methods in Small and Medium Sized Companies

    • 1st Edition
    • Peter Kopacek
    • English
    The objective of this 1st Workshop was to bring together end-users, manufacturers and (computer) control specialists to evaluate possibilities in the important field of factory automation. This volume offers solutions for product, process design, production design and control. Technical criteria are also discussed and economic justification methods are evaluated. The papers included present intelligent, modular, "low cost" approaches or solutions appropriate for small and medium sized companies which might benefit from improved efficiency and competitiveness.

  • A Reference Book of English Words and Phrases for Foreign Science Students

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • R. F. Price
    • English
    A Reference Book of English Words and Phrases for Foreign Science Students is a reference book of English words and phrases for foreign students, to be used as an aid when reading books on science, making notes, or when describing experiments. It is intended to teach the non-technical English words and phrases which are necessary to describe and explain things and events scientifically. Instructions on how to use the book are included. Comprised of eight chapters, this book begins by introducing the reader to qualities of things (shape, composition, texture, color, taste and smell). Subsequent chapters focus on relations (quantitative relations and size, spatial relations and order, temporal relations, whole and part); actions (change, motion, techniques and use of apparatus); facts, concepts, and problems in science; the scientific method; causation and classification; and the particular, the general, and comparisons. This monograph is intended for foreign students who wish to write clear, concise English and to understand more clearly the methods used by scientists in solving problems.

  • New Trends in Design of Control Systems 1994

    • 1st Edition
    • J. Mikles + 1 more
    • English
    Computer control systems are developing rapidly, therefore an insight of the latest trends in the design of control systems will increase the success of future developments. This publication brings together the latest key papers on research and development trends in this field, allowing both academics and industrial practioners to find new insights and gain from each other's experience.

  • Intelligent Autonomous Vehicles 1995

    • 1st Edition
    • K. Koskinen + 1 more
    • English
    The area of intelligent autonomous vehicles or robots has proved to be very active and extensive both in challenging applications as well as in the source of theoretical development. Automation technology is rapidly developing in many areas including: agriculture, mining, traditional manufacturing, automotive industry and space exploration. The 2nd IFAC Conference on Intelligent Autonomous Vehicles 1995 provides the forum to exchange ideas and results among the leading researchers and practitioners in the field. This publication brings together the papers presented at the latest in the series and provides a key evaluation of developments in automation technologies.

  • Power Systems & Power Plant Control

    Proceedingsof the IFAC Symposium, Beijing, China, 12-15 August 1986
    • 1st Edition
    • P. Wang
    • English
    The control of power systems and power plants is a subject of worldwide interest which continues to sustain a high level of research, development and application in many diverse yet complementary areas. Papers pertaining to 13 areas directly related to power systems and representing state-of-the-art methods are included in this volume. The topics covered include linear and nonlinear optimization, static and dynamic state estimation, security analysis, generation control, excitation and voltage control, power plant modelling and control, stability analysis, emergency and restorative controls, large-scale sparse matrix techniques, data communication, microcomputer systems, power system stabilizers, load forecasting, optimum generation scheduling and power system control centers. The compilation of this information in one volume makes it essential reading for a comprehension of the current knowledge in the field of power control.

  • Advanced Information Processing in Automatic Control (AIPAC'89)

    • 1st Edition
    • R. Husson
    • English
    Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.

  • Heat Flow Below 100°K and Its Technical Applications

    Proceedings of the International Institute of Refrigeration Commission 1, Grenoble, 1965
    • 1st Edition
    • Sam Stuart
    • English
    Heat Flow below 100°K and Its Technical Applications covers the proceedings of the International Institute of Refrigeration. This release serves the purpose of compiling supplementary materials to the published report by Committee 3, entitled Protection against Ionizing Radiation from External Sources. This text is a compilation of 12 appendices that comprise information for employing the recommendations of ICRP Publication 15. These appendices relate to the sources of external radiation encountered in medical, dental, and veterinary radiology, as well as in industry and research. Some of the information included are on the collision stopping power of charged particles; interpolated values of quality factor; and quality factor as a function of charged particle energy. This compendium then presents materials on conversion factors, neutron sources and shielding, and range-energy curves. The last two materials cover the shielding for beta sources and X-ray and gamma-ray shielding. This compilation will cater those interested in the technical applications of heat flow, as well as to those who have read the ICRP Publication 15 and in need of supplementary materials.

  • Engineering Applications of Fracture Analysis

    Proceedings of the First National Conference on Fracture Held in Johannesburg, South Africa, 7-9 November 1979
    • 1st Edition
    • G. G. Garrett + 1 more
    • English
    Engineering Applications of Fracture Analysis is a record of the proceedings of the First National Conference on Fracture, held at Johannesburg, South Africa in November 1979. The papers presented in the conference provide a general picture of fracture studies in South Africa. The contributions cover the theoretical analyses of the influence of dislocation stresses in initiating fracture; practical design of steel components exposed to high-temperature environments; problems encountered in South African industry, such as rock drilling equipment failures, unwanted rock fractures in mines and safety problems in nuclear reactors; fracture study techniques; and formal applications of fracture mechanics. The book will be of interest to metallurgists, engineers, and materials specialists.

  • Safety of Computer Control Systems 1992 (SAFECOMP' 92)

    Computer Systems in Safety-Critical Applications
    • 1st Edition
    • H.H. Frey
    • English
    SAFECOMP '92 advances the state-of-the-art, reviews experiences of the past years, considers the guidance now available and identifies the skills, methods, tools and techniques required for the safety of computer control systems.

  • Control Aspects of Prosthetics and Orthotics

    Proceedings of the IFAC Symposium, Ohio, USA, 7-9 May 1982
    • 1st Edition
    • R. M. Campbell
    • English
    Control Aspects of Prosthetics and Orthotics covers the proceedings of the International Federation of Automatic Control (IFAC) Symposium that tackles issues relating to the control systems of prosthetics and orthotics device. The book organizes topics according to the sessions of the symposium. Session 1 deals with the functional muscle and nerve simulation, while Session 2 discusses the man-machine mechanical and information interface. The third session covers sensory replacement and artificial organs, while the fourth session tackles instrumentation, medical devices, and clinical procedures. The last session discusses robotics and mechanics. The text will be of great interest to physicians, physical therapists, orthotists, and prosthetists, whose line of work involves prosthetics and orthotics systems.

  • Advanced Control of Chemical Processes (ADCHEM'91)

    Selected Papers from the IFAC Symposium, Toulouse, France, 14-16 October 1991
    • 1st Edition
    • K. Najim + 1 more
    • English
    This volume contains 40 papers which describe the recent developments in advanced control of chemical processes and related industries. The topics of adaptive control, model-based control and neural networks are covered by 3 survey papers. New adaptive, statistical, model-based control and artificial intelligence techniques and their applications are detailed in several papers. The problem of implementation of control algorithms on a digital computer is also considered.

  • Adaptive Systems in Control and Signal Processing 1995

    • 1st Edition
    • Cs. Banyasz
    • English
    Leading academic and industrial researchers working with adaptive systems and signal processing have been given the opportunity to exchange ideas, concepts and solutions at the IFAC Symposia on Adaptive Systems in Control and Signal Processing. This postprint volume contains all those papers which were presented at the 5th IFAC Symposium in Budapest in 1995. The technical program was composed of a number of invited and contributed sessions and a special case study session, providing a good balance between applications and theory oriented papers.

  • Computer Software Structures Integrating AI/KBS Systems in Process Control

    • 1st Edition
    • K.-E. Arzen
    • English
    The past few years have seen rapid developments in computer technology, giving rise to a range of system control options which can be applied in the process industries. These include; open systems, expert systems, neural networks, fuzzy systems and object-oriented systems, all of which are covered in this key volume, which provides an invaluable summary of the latest international research in this area.

  • Technology for Underdeveloped Areas

    An Annotated Bibliography
    • 1st Edition
    • Jack Baranson
    • English
    Technology for Underdeveloped Areas: An Annotated Bibliography focuses on the functional aspects of technology, including the economic criteria of choice, the institutional requisite for transmittal, and the cultural constraints upon proficiency. This book discusses the relevant concepts, provides specific examples of products and systems required by developing economies, and indicates organizational approaches to adapting advantageous technology. Organized into five parts, this book starts with an overview of the most comprehensive statements on the criteria of choice for developing economies. This text then examines the concept of scarcity, which is essential to questions of technological optima in the areas of investment returns, trade specializations, and growth rates. Other chapters consider the general problems encountered by developing economies in the world. This book discusses as well the changes in corporate and economic policies to enhance technological efficiency. The final chapter analyzes the difficulties encountered by international corporations trying to transplant industrial techniques. Social scientists, economists, and engineers will find this book useful.

  • Robot Control 1988 (SYROCO'88)

    Selected Papers from the 2nd IFAC Symposium, Karlsruhe, FRG, 5-7 October 1988
    • 1st Edition
    • U. Rembold
    • English
    Containing 88 papers, the emphasis of this volume is on the control of advanced robots. These robots may be self-contained or part of a system. The applications of such robots vary from manufacturing, assembly and material handling to space work and rescue operations. Topics presented at the Symposium included sensors and robot vision systems as well as the planning and control of robot actions. Main topics covered include the design of control systems and their implementation; advanced sensors and multisensor systems; explicit robot programming; implicit (task-orientated) robot programming; interaction between programming and control systems; simulation as a programming aid; AI techniques for advanced robot systems and autonomous robots.

  • A Practical Guide to Maintenance Engineering

    • 1st Edition
    • C. L. Dunlop
    • English
    A Practical Guide to Maintenance Engineering presents a critical review of the physical make-up of the equipment. It discusses the equipment register, equipment codes, instrument function terminology, and loop function terminology. It also addresses planned preventive and running maintenance as well as the objectives and guidelines of running maintenance. Some of the topics covered in the book are the preparations of completed planned maintenance service sheet, task sheet, service sheet, and equipment failure sheet; maintenance defect monitoring; maintenance stores spare part monitoring; statutory inspection monitoring; maintenance vibration analysis; and maintenance management. The preparation of safety relief valve schedule is also discussed. An in-depth analysis of the work order input/output flow diagram is provided. The planned and preventive maintenance flow diagram is presented. A chapter is devoted to creation of test running and maintenance record. The book can provide useful information to iron mechanics, engineers, students, and researchers.

  • Pneumatic and Hydraulic Components and Instruments in Automatic Control

    Proceedings of the IFAC Symposium, Warsaw, Poland, 20-23 May 1980
    • 1st Edition
    • H. J. Leskiewicz + 1 more
    • English
    Pneumatic and Hydraulic Components and Instruments in Automatic Control covers the proceedings of the International Federation of Automatic Control (IFAC) Symposium. The book reviews papers that tackle topics relating to the use of pneumatic and hydraulic equipment in automatic control. This text discusses topics such as dynamic behavior analysis of pneumatic components by numerical techniques and application of bond graphs to the digital simulation of a two-stage relief valve dynamic behavior. Topics including mathematical modeling of cavitation in hydraulic pumps; pro and contra electro-fluid analogies in digital simulation of fluid circuits; and improvement in accuracy of pneumatic delay are covered as well. This book will be of great use to researchers and professionals whose work involves the designing of automatic control systems.

  • Nonlinear Control Systems Design 1989

    Selected Papers from the IFAC Symposium, Capri, Italy, 14-16 June 1989
    • 1st Edition
    • A. Isidori
    • English
    In the last two decades, the development of specific methodologies for the control of systems described by nonlinear mathematical models has attracted an ever increasing interest. New breakthroughs have occurred which have aided the design of nonlinear control systems. However there are still limitations which must be understood, some of which were addressed at the IFAC Symposium in Capri. The emphasis was on the methodological developments, although a number of the papers were concerned with the presentation of applications of nonlinear design philosophies to actual control problems in chemical, electrical and mechanical engineering.

  • Fault Detection, Supervision and Safety for Technical Processes 1991

    Selected Papers from the IFAC/IMACS Symposium, Baden-Baden, Germany, 10 - 13 September 1991
    • 1st Edition
    • B. Freyermuth + 1 more
    • English
    These Proceedings provide a general overview as well as detailed information on the developing field of reliability and safety of technical processes in automatically controlled processes. The plenary papers present the state-of-the-art and an overview in the areas of aircraft and nuclear power stations, because these safety-critical system domains possess the most highly developed fault management and supervision schemes. Additional plenary papers covered the recent developments in analytical redundancy. In total there are 95 papers presented in these Proceedings.

  • Power Systems: Modelling and Control Applications

    Selected Papers from the IFAC Symposium, Brussels, Belgium, 5-8 September 1988
    • 1st Edition
    • A. J. Calvaer
    • English
    The control of power systems and power plants is a subject of worldwide interest which continues to sustain a high level of research, development and application. Papers pertaining to areas directly related to power systems and representing the state-of-the-art methods are included in this volume. The topics covered include security analysis, dynamic state estimation, voltage control, power plant control, stability analysis, data communication, expert systems and training simulators for power plants. This interchange between those involved in the research and those involved in the practical applications of new ideas and developments provide a comprehensive reference source for all involved in the power industry.

  • Robust Adaptive Control

    Proceedings of the IFAC Workshop, Newcastle, Australia, 22-24 August 1988
    • 1st Edition
    • G.C. Goodwin
    • English
    The workshop brought together international experts in the field of robust adaptive control to present recent developments in the area. These indicated that the theory of adaptive control is moving closer to applications and is beginning to give realistic guidelines useful in practical situations. The proceedings also focused on the value of such practical features as filtering, normalization, deadzones and unification of robust control and adaptation.

  • Perspectives in Creep Fracture

    • 1st Edition
    • M. F. Ashby + 1 more
    • English
    Perspectives in Creep Fracture is a collection of studies that covers the advances in the analysis of the mechanisms involved in the process of creep fracture. The book presents nine articles that present data and discuss the theoretical advancement in the field. The text first covers the mechanisms leading to fracture in metals and ceramics, and then proceeds to tackling the problem of the nucleation of creep damage. Next, the book details the models for the growth of cracks and voids by diffusion and by plastic processes. The next two chapters deal with the creep fracture of ceramics. In the eighth chapters, the text examines the development and propagation of creep cracks. The last chapter details the theory involved in the propagation of cracks by cavitation. The book will be of great interest to researchers and practitioners of materials engineering, metallurgy, and other fields involved in fracture mechanics.

  • Integration of Process Design and Control

    • 1st Edition
    • E. Zafiriou
    • English
    The existence of interactions between the design of a process and that of its control system have been known to industrial practitioners for a long time. In the past decade academic research has produced methodologies and tools that begin to address the issue of designing processes that are flexible, can be controlled reliably, and are inherently safe. This publication unites the work of academics and practitioners with interests in the integration of process design and control, in order to examine the state of the art in methodologies and applications. The scope covers the design of chemical plants at different stages of detail. It also examines control issues from the plantwide level, where, for example, recycles between units can be important, to the specific unit level, where the availability or selection of measurements might be the most important factor.

  • Computer Applications in Biotechnology

    • 1st Edition
    • A. Munack + 1 more
    • English
    The 6th Computer Applications in Biotechnology (CAB6) conference was a continuation of 2 series of events: the IFAC symposia on Modelling and Control of Biotechnical Processes and the International Conferences on Computer Applications in Fermentation Technology. This conference provided the opportunity for both sides, leading researchers and industrial practitioners, in this interdisciplinary field to exchange new ideas and technology; concepts and solutions. This postprint volume contains all those papers which were presented at the conference.

  • Automatic Control in Aerospace 1989

    Selected Papers from the IFAC Symposium, Tsukuba, Japan, 17-21 July 1989
    • 1st Edition
    • T. Nishimura
    • English
    The papers presented at the Symposium covered the areas in aerospace technology where automatic control plays a vital role. These included navigation and guidance, space robotics, flight management systems and satellite orbital control systems. The information provided reflects the recent developments and technical advances in the application of automatic control in space technology.

  • Skill Based Automated Manufacturing

    Proceedings of the IFAC Workshop, Karlsruhe, Federal Republic of Germany, 3-5 September 1986
    • 1st Edition
    • P. Brödner
    • English
    This volume investigates the relationship between man and the computer, and how far they are integrated in the modern industrial world. The effects and changes computers have brought about are discussed, including a look at job structures, the function of CAD training and the design and implementation of control systems in engineering industries to give a comprehensive overview of the computer revolution and its future in society.

  • Automatic Control 1990

    • 1st Edition
    • Volume III
    • Ãœ Jaaksoo
    • English
    This volume provides a general overview on the state-of-the-art and future developments in automation and control. The application of systems and control in all areas is covered, from the social and cultural effects of control, to control in mineral and metal processing. This volume will be an invaluable source of information to all those interested in the areas of automation and control.

  • Reliability of Instrumentation Systems for Safeguarding & Control

    Proceedings of the IFAC Workshop, Hague, Netherlands, 12-14 May 1986
    • 1st Edition
    • L. Boullart + 1 more
    • English
    Presents and discusses the various reliability aspects of modern instrumentation systems for industrial processes, with special emphasis given to the influence of human behaviour on systems reliability. Subject areas covered include: the mathematical tools available to assess the reliability of instrumentation systems, their applications and limitations; the way in which theory is put into practice during the design of equipment; the quality control aspects of both hardware and software, and the availability of integrated systems in the field as compared with the design criteria. Actual data, test criteria and maintenance strategies are also included.

  • Dynamics and Control of Chemical Reactors and Distillation Columns

    Selected Papers from the IFAC Symposium, Bournemouth, UK, 8-10 December 1986
    • 1st Edition
    • C. McGreavy
    • English
    Presents the latest results of both academic and industrial research in the control, modelling and dynamics of two of the most fundamental constituents of all chemical engineering plant. Includes contributions on fixed-bed, gas-phase and tubular reactors, thermal cracking furnaces and distillation columns, related to applications in all major areas of chemical engineering, including petrochemicals and bulk chemical manufacture. Contains 51 papers.

  • Integrated Systems Engineering

    • 1st Edition
    • G. Johannsen
    • English
    A key solution for present and future technological problems is an integration systems approach. The challenging cross-discipline of integrated systems engineering is, perhaps, more easily accepted and implemented in the organizational structures of industries than in academia. The opportunity for both sides, leading researchers and industrial practitioners, in this field to exchange ideas, concepts and solutions has been provided at the IFAC symposia on integrated systems engineering. This postprint volume contains all those papers which were presented at the symposia, including the three plenary papers and the papers of the case study session as well as the summaries of the three discussion sessions.

  • Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD'95)

    • 1st Edition
    • J.B. Rawlings
    • English
    Three important areas of process dynamics and control: chemical reactors, distillation columns and batch processes are the main topics of discussion and evaluation at the IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD '95). This valuable publication was produced from the latest in the series, providing a detailed assessment of developments of key technologies within the field of process dynamics and control.

  • Algorithms and Architectures for Real-Time Control 1992

    • 1st Edition
    • P.J. Fleming + 1 more
    • English
    This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.

  • Worked Examples in Turbomachinery

    (Fluid Mechanics and Thermodynamics)
    • 1st Edition
    • S. L. Dixon
    • English
    Worked Examples in Turbomachinery (Fluid Mechanics and Thermodynamics) is a publication designed to supplement the materials in Fluid Mechanics, Thermodynamics of Turbomachinery, Second Edition. The title provides detailed solution for the unanswered problems from the main textbook. The text first covers dimensional analysis, and then proceeds to tackling thermodynamics. Next, the selection discusses two-dimensional cascades. The text also talks about axial flow turbines and compressors, along with the three-dimensional flow in axial turbo machines. Chapter 7 covers centrifugal compressor and pumps, while Chapter 8 tackles radial flow turbines. The book will be of great use to students of mechanical engineering, particularly those who have access to the main textbook.

  • General Studies

    A First Handbook for Technical Students
    • 1st Edition
    • Ian J. Finch
    • D. F. Bratchell + 1 more
    • English
    General Studies: A First Handbook for Technical Students deals with liberal, general, social and English studies. This handbook narrates the author's reminiscences of childhood in a large Welsh industrial town at the beginning of the Great War, about his grandpa, his first day in school, and the time when he takes his eleven plus test. At Technical College, he studies mathematics, Workshop Technology, and attends further studies to become a qualified technician. He explains how not to get lost in a library and recommends some books that are well worth reading. He finds a job when he reaches 15 years of age as an apprentice at the Pirelli plant at Burton. In his job, he becomes aware of the possibilities of accidents and discusses the major responsibilities an employer has toward his employees. He also explains what effective communication is, and how to use technical description and explanations. He writes about the impact of the ""goggle box"" or television, the miracle of newspaper publishing, as well as the problems of the younger generation. General readers who like autobiography with a mixture of humor and personal philosophies will find this book entertaining.

  • Control in Transportation Systems 1986

    Proceedings of the 5th IFAC/IFIP/IFORS Conference, Vienna, Austria, 8-11 July 1986
    • 1st Edition
    • M.M. Etschmaier + 3 more
    • English
    This volume investigates developments in, and management of, transportation systems, future trends and what effects these will have on society. The book studies transportation systems planning; traffic problems and the issue of conservation; the use of logistics, and the role of computers and robotics in traffic control.

  • Advances in Control Education 1991

    Selected Papers from the IFAC Symposium, Boston, Massachusetts, USA, 24-25 June 1991
    • 1st Edition
    • G.F. Franklin + 2 more
    • English
    This volume is the published proceedings of selected papers from the IFAC Symposium, Boston, Massachusetts, 24-25 June 1991, where a forum was provided for the discussion of the latest advances and techniques in the education of control and systems engineers. Emerging technologies in this field, neural networks, fuzzy logic and symbolic computation are incorporated in the papers. Containing 35 papers, these proceedings provide a valuable reference source for anyone lecturing in this area, with many practical applications included.

  • Distributed Computer Control Systems 1985

    • 1st Edition
    • G. J. Suski
    • English
    Focuses on recent advances in the theory, applications and techniques for distributed computer control systems. Topics covered include: DCCS applications and case studies, DCCS communications, architectural considerations in DCCS, DCCS tools for design and development, DCCS communication management, function and resource allocation in DCCS, design methodologies for DCCS, DCCS applications and systems. Contains 22 papers.

  • Data Communication Systems and Their Performance

    Proceedings of the IFIP TC6 Fourth International Conference on Data Communication Systems and Their Performance, Barcelona, Spain, 20-22 June, 1990
    • 1st Edition
    • G. Pujolle + 1 more
    • English
    The research papers in this volume describe recent, original developments in techniques, tools and applications in the area of communication system performance. Involved in the project are researchers from the world's leading universities, research institutes and companies.

  • Advanced Control of Chemical Processes 1994

    • 1st Edition
    • D. Bonvin
    • English
    This publication brings together the latest research findings in the key area of chemical process control; including dynamic modelling and simulation - modelling and model validation for application in linear and nonlinear model-based control: nonlinear model-based predictive control and optimization - to facilitate constrained real-time optimization of chemical processes; statistical control techniques - major developments in the statistical interpretation of measured data to guide future research; knowledge-based v model-based control - the integration of theoretical aspects of control and optimization theory with more recent developments in artificial intelligence and computer science.

  • Artificial Intelligence in Real-Time Control 1991

    Proceedings of the 3rd IFAC Workshop, California, USA, 23-25 September 1991
    • 1st Edition
    • M.G. Rodd + 1 more
    • English
    This set of proceedings contains the most significant papers presented at the third IFAC Workshop on Artificial Intelligence in Real-time Control, which was held from September 23-25, 1991 in the USA. In this workshop, although there were still some "exotic" applications, a more practical view of the applications and limitations of current AI technology dominated the participants' discussions. With its resultant focus on reliability and safety considerations, the workshop posed as many questions as it answered. It provides an excellent mirror of the current state-of-the-art which these proceedings are intended to illustrate.

  • Real Time Digital Control Applications

    Proceedings of the IFAC/IFIP Symposium, Guadalajara, Mexico, 17-19 January 1983
    • 1st Edition
    • A. Alonso-Concheiro
    • English
    Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.

  • Control in Transportation Systems

    Proceedings of the 4th IFAC/IFIP/IFORS Conference, Baden-Baden, Federal Republic of Germany, 20-22 April 1983
    • 1st Edition
    • D. Klamt + 1 more
    • English
    Control in Transportation Systems covers the proceedings of the Fourth International Federation of Automatic Control (IFAC)/International Federation for Information Processing (IFIP)/International Federation of Operational Research Societies (IFORS) Conference on Control in Transportation Systems. The book discusses papers that tackle applications, methodologies, and control problems of surface transportation systems. This text covers topics such as operation of ground transportation systems; availability and safety; and the impact of modeling on the operation of transportation systems. This selection also discusses self-tuning control of multilocomotive-powe... long freight trains; fuzzy control for automatic train operation system; and energy optimal control in transportation systems. This book will be of great use to engineers especially those who specialize with transport systems.

Related subjects