Skip to main content
Elsevier

Books in Chemical engineering

The Chemical Engineering collection offers content that combines research with foundational knowledge, practical information, methods and case studies, in a variety of areas, including biochemical engineering, catalysis, filtration & separation, colloids & surface chemistry, electrochemical engineering, energy & transport processes, materials chemistry, metallurgy, process engineering, safety & reliability, sustainable & environmental, to help chemical engineers address the challenges we face today, including climate change, global warming, health and nutrition, and alternative energy.

  • Sampling Source Book

    A Indexed Bibliography of the Literature of Sampling
    • 1st Edition
    • C L Thomas
    • English
    The Sampling Source Book is an invaluable guide to the world's literature on sampling and provides a timely and much needed focus on what is a diverse and important subject. Based on an exhaustive search of the world's literature, this index containsbibliographi... references to journal articles, patents, conference proceedings, books, technical reports and standards. Details of databases searched and outlines are provided as to how the searches were conducted to facilitate update of the data by usersof the index. The material contained in this source book has been assessed by specialists in sampling operations; assuring relevance of the material included. Comprehensive lists of suppliers of sampling equipment, consultants and professional bodieswith expertise and interests in sampling are also presented.

  • Computational Techniques for Chemical Engineers

    International Series of Monographs in Chemical Engineering
    • 1st Edition
    • C. Storey + 1 more
    • P. V. Danckwerts
    • English
    Computational Techniques for Chemical Engineers offers a practical guide to the chemical engineer faced with a problem of computing. The computer is a servant not a master, its value depends on the instructions it is given. This book aims to help the chemical engineer in the right choice of these instructions. The text begins by outlining the principles of operation of digital and analogue computers and then discussing the difficulties which arise in formulating a problem for solution on such a machine. This is followed by separate chapters on digital computers and their programming; the use of digital computers in chemical engineering design work; optimization techniques and their application in the selection of optimum designs; the solution of sets of non-linear algebraic equations via hill-climbing; and determination of equilibrium compositions by minimization of Gibbs free energy. Subsequent chapters discuss the solution of partial or simultaneous differential equations; parameter estimation in differential equations; continuous systems; and analogue computers.

  • Cooling Towers

    Principles and Practice
    • 3rd Edition
    • G. B. Hill + 2 more
    • English
    Cooling Towers: Principles and Practice, Third Edition, aims to provide the reader with a better understanding of the theory and practice, so that installations are correctly designed and operated. As with all branches of engineering, new technology calls for a level of technical knowledge which becomes progressively higher; this new edition seeks to ensure that the principles and practice of cooling towers are set against a background of up-to-date technology. The book is organized into three sections. Section A on cooling tower practice covers topics such as the design and operation of cooling towers; types of cooling tower; cooling tower components and construction materials; practical aspects of tower selection; industrial applications; and water quality and treatment. Section B is devoted to cooling tower theory and calculations. These include psychrometry; heat transfer theory and calculations; calculations when selecting tower size for a given duty; and the use of charts for calculation of cooling tower duties. Section C on data and tables explains the basis of the SI system of units and includes meteorological tables and data as well as data on specific heat capacity of some common substances.

  • Carbohydrate Chemistry—VII

    VIth International Symposium on Carbohydrate Chemistry
    • 1st Edition
    • W. M. Doane
    • English
    Carbohydrate Chemistry – VI (Madison 1972) covers the proceedings of the Sixth International Symposium on Carbohydrate Chemistry, held in Madison, USA on August 14-18, 1972. Chapter 1 focuses on the study of complex formation of sugar-metal complexes using proton magnetic resonance spectroscopy. Chapter 2 describes the three types of reaction in the synthesis of fluoro sugars, namely, nucleophilic displacements with fluoride salts, epoxide cleavage, and glycal addition. Chapter 3 discusses the influence of pure, applied, and analytical research studies on the changes in carbohydrate marketing and industrial sugar production. Chapter 4 examines the biosynthesis of chondroitin sulfate, which exemplifies the formation of connective tissue polysaccharides. This chapter also considers the properties and substrate specificities of enzymes used in the biosynthesis. Chapter 5 explores the developments in cellulose and related polysaccharides found in plant cell walls. This book will be of great benefit to carbohydrate chemists and researchers.

  • Bioreactor Design Fundamentals

    • 1st Edition
    • Norton G. McDuffie
    • English
    Bioreactor Design Fundamentals presents the development in the bioreactor field. This book discusses the applications of biological kinetics and thermodynamics. Organized into seven chapters, this book begins with an overview of the design of biological reactors that involves determining operating conditions, sizing the reactor, controlling temperature and sterility, and controlling operating variables. This text then examines the significance of pH considerations in biological reactor and process design. Other chapters consider enzyme kinetics and the equations most commonly used as models for overall enzyme kinetics. This book discusses as well the mass transfer rates in bioreactors, which are significant because of their effects on some chemical reaction rates in transformations by enzymes or by living cells. The final chapter deals with the ideal state of the continuous stirred-tank reactors (CSTRs). This book is a valuable resource for biochemical engineers and industrial microbiologists.

  • Handbook of Thermodynamic Diagrams

    Organic Compounds C8 to C28
    • 1st Edition
    • Volume 3
    • Carl L. Yaws
    • English

  • Handbook of Thermodynamic Diagrams

    Organic Compounds C5 to C7
    • 1st Edition
    • Volume 2
    • Carl L. Yaws
    • English

  • Viscoelasticity

    Phenomenological Aspects
    • 1st Edition
    • J. T. Bergen
    • English
    Viscoelasticity: Phenomenological Aspects provides information pertinent to the phenomenological aspects of viscoelasticity. This book provides the basic approach to the behavioral description of viscoelasticity. Organized into seven chapters, this book begins with an overview of the development of various theories of linear viscoelastic theories. This text then presents the results of investigation that evaluate the linear viscoelastic parameters of typical polymeric materials. Other chapters consider the development of nonlinear stress-strain-time relations for viscoelastic materials, which have been helpful in the analysis of the linear mechanical behavior of rubberlike polymers and the molecular theories. This book discusses as well the application of linear theories and the behavior of a number of polymer systems and their similarities and differences. The final chapter deals with experimental observations of real materials that exhibit nonlinear, time-dependent stress-strain behavior. This book is a valuable resource for chemists, mechanical engineers, and research workers.

  • Progress in Surface and Membrane Science

    Volume 14
    • 1st Edition
    • D. A. Cadenhead + 1 more
    • English
    Progress in Surface and Membrane Science, Volume 14 covers the advances in the study of surface and membrane science. The book discusses statistical thermodynamics of monolayer adsorption from gas and liquid mixtures on homogeneous and heterogeneous solid surfaces; and the structure of the boundary layers of liquids and its influence on the mass transfer in fine pores. The text then describes the coupling of ionic and non-electrolyte fluxes in ion selective membranes; the electrocatalytic properties of matalloporphins at the interface; and the adsorption from binary gas and liquid phases. Phase transitions in two-dimensional amphiphilic systems, as well as the wettability of solids by liquid metals are also considered. Biochemists, physicists, and people in electrochemistry research will find the book invaluable.

  • Handbook of Thermodynamic Diagrams

    Organic Compounds C1 to C4
    • 1st Edition
    • Volume 1
    • Carl L. Yaws
    • English

  • Electrophilic Additions to Unsaturated Systems

    • 2nd Edition
    • Volume 9
    • P.B.D. De La Mare + 1 more
    • English
    The first edition of this book, published in 1966, received wide acclaim. This new edition has been almost entirely rewritten and expanded to incorporate the extensive research done in this field over the last two decades. The book provides a unified treatment, from a mechanistic viewpoint, of those reactions of unsaturated organic compoiunds which, being initiated by co-ordination with an electrophilic reagent, proceed through intermediates having cationic character, and are completed by the formation of products of addition. After a brief account of the properties of carbocations, electrophilic reagents are considered in accordance with their position in the Periodic Table of the elements.

  • The Toxicity of Plutonium, Americium and Curium

    A Report Prepared Under Contract for the Commission of the European Communities Within Its Research and Development Programme on Plutonium Recycling in Light Water Reactors
    • 1st Edition
    • J. C. Nenot + 1 more
    • English
    The Toxicity of Plutonium, Americium and Curium provides a biological basis for an assessment of the radiological health problems resulting from human exposure to americium, curium, and plutonium. This book discusses the method of injection of the chelating agent DTPA for removing soluble forms of americium, curium, and plutonium. Organized into 10 chapters, this book begins with an overview of the biological effects in man that are attributed to exposure to actinides. This text then examines the uses of americium and curium in transmission scanning studies in tissues, in smoke detectors, and in neutron sources. Other chapters consider the metabolism or effects of plutonium in humans that can be employed to predict the potential consequences of human exposure. This book discusses as well routes of entry of radioactive materials into the body by inhalation, by ingestion, through cuts, or by absorption through the intact skin. The final chapter deals with the assessment of the radiological health problems resulting from the use of mixed oxide fuels of uranium and plutonium in light water reactors. This book is a valuable resource for scientists.

  • Topics in Millimeter Wave Technology

    Volume 2
    • 1st Edition
    • Kenneth J Button
    • English
    Topics in Millimeter Wave Technology is a compendium of papers dealing with plasma waves, TUNNETT diodes, and solid-state devices. One paper describes the application of the TUNNET diode, a semiconductor with a coherent signal source of over 100 GHz to 1000 GHz. The paper notes the possibility of achieving more than 1000 GHz through sophisticated device fabrication technology. Another paper discusses the use of computer-aided testing of superconductor-insul... (SIS) junction whose mixing properties are effected by the ski-sloped shape of the current-voltage curve. Such testing methods are useful at fixed or variable temperatures from 15 K to 300 K. One paper reviews the collective Thomson scattering theory, including the application of the multichannel far-infrared scattering system in the basic tokamak plasma physics. Another paper discusses the static induction transistor for very high frequency operation as the millimeter to submillimeter wave region is the ideal static induction transistor in ballistic devices. This review material can be helpful for nuclear scientists, nuclear engineers, students of physics, and researchers involved in plasma physics and semiconductor technology.

  • Advances in Polarography

    Proceedings of the Second International Congress Held at Cambridge 1959
    • 1st Edition
    • Ian S. Longmuir
    • English
    Advances in Polarography, Volume 1 is a collection of papers presented at the Second International Congress of Polarography held at Cambridge in 1959 in honor of the 70th birthday of Professor Heyrovsky. This book is composed of 26 chapters and begins with discussions of the principles, mode of operation, and application of several polarographic techniques, including oscillographic, derivative, continuous, and differential cathode-ray polarography. The succeeding section discusses the theoretical, kinetic, and fundamental aspects of these techniques. The remaining sections are devoted to the analytical, industrial, biological, and medical applications of polarography.

  • Nickel and Chromium Plating

    • 2nd Edition
    • J. K. Dennis + 1 more
    • English
    Nickel and Chromium Plating, Second Edition, does not merely update the first edition but also places additional emphasis on certain methods that have achieved increased industrial use in the 14 years since the first edition was published. The book begins by tracing the history of nickel and chromium plating. This is followed by a discussion of the electrochemistry of electrodeposition from aqueous electrolyte solutions. Separate chapters cover topics such as autocatalytic (electroless) nickel deposition; nickel plating onto aluminum and other difficult substrates; plating onto plastics and high-speed plating; the deposition of various nickel alloys for decorative and functional applications; composite coatings; and tampon (brush) plating. This book will be helpful to those new to the plating industry; those experienced in the industry will find that this revised version enables them to keep up-to-date with the latest developments in this specialized technology.

  • Solid—Gas Separation

    • 1st Edition
    • Ladislav Svarovsky
    • J. C. Williams + 1 more
    • English
    Solid—Gas Separation presents a brief and highly technical account of the principles and technology of gas-cleaning. The book deals with three associated aspects of gas-cleaning: the relevant dimensionless groups, the efficiency of separation and the economics of gas cleaning. The text begins with the discussion of the principles of particle separation and classification of equipment; general characteristics of equipment; and dimensionless groups for modeling and equipment scale-up. Subsequent chapters are devoted to the examination of the efficiency of separation, aero-mechanical dry separators, scrubbers, electrostatic precipitators, and filters. The last chapter deals with the economics of gas-cleaning equipment selection. Environmental and industrial engineers will find the text very useful.

  • The Control of Growth Processes by Chemical Agents

    • 1st Edition
    • A. D. Welch + 1 more
    • English
    The Control of Growth Processes by Chemical Agents covers the proceedings of the 1966 Third International Pharmacological Meeting on Control of Growth Processes by Chemical Agents, held in Sao Paolo, Brazil. This book is composed of seven chapters, and begins with a survey of the comparative biology of dihydrofolate reductases as a basis for chemotherapy. The succeeding chapters deal with the mechanism of pyrimidine metabolism as a chemotherapeutic target and the biochemical and biological research works with arabinoforanosyl cytosine, known as cytarabine. These chapters specifically describe the cytotoxicity and antitumor activity of cytarabine. The remaining chapters discuss the advances in viral chemotherapy and the regulatory mechanisms of enzyme synthesis and their alteration in malignancy. This book will be of value to biologists, biochemists, and oncologists.

  • Adsorption from Solutions of Non-Electrolytes

    • 1st Edition
    • J. J. Kipling
    • English
    Adsorption from Solutions of Non-Electrolytes provides a general discussion of the subject, which has so far been given little or no attention in current textbooks of physical chemistry. A general view of the subject is particularly needed at a time when we wish to see how far it will be possible to use theories of solutions to explain the phenomena of adsorption. The book opens with an introductory chapter on the types of interface, aspects of adsorption from solution, types of adsorption, and classification of systems. This is followed by separate chapters on experimental methods, adsorption at the liquid-solid interface, adsorption from completely miscible and partially liquids, adsorption of gases and solids from solution, adsorption of polymers, and adsorption in multicomponent systems. Subsequent chapters deal with factors influencing competitive adsorption at the liquid-solid interface. adsorption at the liquid-vapor and liquid-liquid interface, kinetics and thermodynamics of adsorption from the liquid phase, the use of columns in adsorption, and use of adsorption from solution to measure surface area.

  • Bubble Wake Dynamics in Liquids and Liquid-Solid Suspensions

    • 1st Edition
    • Liang-Shih Fan + 1 more
    • Howard Brenner
    • English
    This book is devoted to a fundamental understanding of the fluid dynamic nature of a bubble wake, more specifically the primary wake, in liquids and liquid-solid suspensions, an dto the role it plays in various important flow phenomena of multiphase systems. Examples of these phenomena are liquid/solids mixing, bubble coalescence and disintergration, particle entrainment to the freeboard, and bed contraction.

  • Absorption

    Fundamentals & Applications
    • 1st Edition
    • R. Zarzycki + 1 more
    • J.M. Coulson
    • English
    This book gives a practical account of the modern theory of calculation of absorbers for binary and multicomponent physical absorption and absorption with simultaneous chemical reaction. The book consists of two parts: the theory of absorption and the calculation of absorbers. Part I covers basic knowledge on diffusion and the theory of mass transfer in binary and multicomponent systems. Significant stress is laid on diffusion theory because this forms the basis for the absorption process. In the next chapters the fundamentals of simultaneous mass transfer and chemical reaction, the theory of the desorption of gases from liquids and the formulation of differential mass balances are discussed. Part II is devoted to the calculation of absorbers and the classification of absorbers. The chapters present calculation methods for the basic types of absorber with a detailed analysis of the calculation methods for packed, plate and bubble columns. The authors illustrate the presented material with a large number of examples, starting with simple ones for binary systems and ending with column calculation for multicomponent systems.

  • Advances in Polarography

    Proceedings of the Second International Congress Held at Cambridge 1959
    • 1st Edition
    • Ian S. Longmuir
    • English
    Advances in Polarography, Volume 3 covers the proceedings of the Second International Congress held at Cambridge in 1959 in honor of the 70th birthday of Professor Heyrovsky. This volume is composed of 40 chapters. Considerable chapters describe the application of polarographic techniques in chemistry, including analysis of carbon-nitrogen single bond, formamides, and numerous organic compounds. Other chapters are devoted to the metallurgical and biological applications of polarography. The last chapters survey the depolarization of the dropping mercury electrode by aqueous suspensions.

  • Progress in Surface and Membrane Science

    Volume 11
    • 1st Edition
    • D. A. Cadenhead + 1 more
    • English
    Progress in Surface and Membrane Science, Volume 11 covers the advances in the study of surface and membrane science. The book discusses the quantum theory of surface phenomena; some fundamental aspects of electrocrystallizati... and exoelectric emission. The text also describes the surface of titanium dioxide; and the prospects for atomic resolution electron microscopy in membranology. Chemists, physicists, and people involved in the electrochemical power laboratory will find the book useful.

  • Random Processes in Nuclear Reactors

    • 1st Edition
    • M. M. R. Williams
    • English
    Random Processes in Nuclear Reactors describes the problems that a nuclear engineer may meet which involve random fluctuations and sets out in detail how they may be interpreted in terms of various models of the reactor system. Chapters set out to discuss topics on the origins of random processes and sources; the general technique to zero-power problems and bring out the basic effect of fission, and fluctuations in the lifetime of neutrons, on the measured response; the interpretation of power reactor noise; and associated problems connected with mechanical, hydraulic and thermal noise sources. The book will be very useful to nuclear engineers.

  • Introductory Systems Analysis for Process Engineers

    • 1st Edition
    • E B Nauman
    • Howard Brenner
    • English
    Introductory Systems Analysis for Process Engineers places an emphasis on dynamic models derived using unsteady-state material and energy balances. Examples include chemical reactions, heat and mass transfer, and residence time distributions in flowsystems. This book is intended as an undergraduate text for junior or senior year process engineers. It provides the mathematics needed for more advanced courses in process control, chemical reaction engineering, and process design.

  • Insights into Chemical Engineering

    Selected Papers of P.V. Danckwerts
    • 1st Edition
    • P. V. Danckwerts
    • English
    A selection of papers many of which proved novel and thought-provoking and have had a considerable influence on the development of chemical engineering, chosen by Professor Danckwerts from research work conducted at Cambridge and Imperial College mainly during the years 1950-1954 and 1957-1973. They are divided into 6 sections with linking critical commentaries

  • Advances in Particulate Materials

    • 1st Edition
    • A. Bose
    • English
    Advances in Particulate Materials introduces the approaches and principles associated with basic powder production, and details the most critical, state-of-the-art advancements in the area of materials processing and particulate materials. As the demands of modern technology increase, particulate materials facilitates the production of numerous advanced materials that may be utilized in aerospace, automotive, defense, chemical, and medical industries.

  • Gas-Liquid-Solid Fluidization Engineering

    • 1st Edition
    • Liang-Shih Fan
    • English
    This book provides a comprehensive mechanistic interpretation of the transport phenomena involved in various basic modes of gas-liquid-solid fluidization. These modes include, for example, those for three-phase fluidized beds, slurry columns, turbulent contact absorbers, and three-phase fluidized beds, slurry columns, turbulent contact absorbers, and three-phase transport. It summarizes the empirical correlations useful for predicting transport properties for each mode of of operation.Gas-Liquid... Fluidization Engineering provides a comprehensive account of the state-of-the-art applications of the three-phase fluidization systems that are important in both small-and large-scale operations. These applications include fermentation,biologi... wastewater treatment, flue gas desulfurization and particulates removal, and resid hydrotreating. This book highlights the industrial implications of these applications. In addition, it discusses information gaps and future directions forresearch in this field.

  • Bretherick's Handbook of Reactive Chemical Hazards

    • 4th Edition
    • L. Bretherick
    • English
    Bretherick's Handbook of Reactive Chemical Hazards, Fourth Edition provides information pertinent to the reactive hazards associated with the use of chemicals. This book discusses the development of the technologies, particularly in the area of safety research. Organized into two chapters, this edition begins with an overview of the advantages to be gained in grouping together elements or compounds showing similar reactivity or structure. This text then explores the underlying principles and practical aspects of minimizing reactive chemical hazards. Other chapters consider the rate of an exothermic chemical reaction, which determines the rate of energy release. This book discusses as well the factors that affect reaction kinetics, which are significant in relation to possible reaction hazards. The final chapter deals with reactions at high temperature that may be exceptionally hazardous attributed to the enhanced kinetic energy content of the system. This book is a valuable resource for chemists. Safety officers who are tasked for safety in industrial laboratories will also find this book extremely useful.

  • The Analysis of Plastics

    • 1st Edition
    • R Belcher
    • English
    Covering all aspects of the analysis of plastics by chemical and physical methods, this book is based on both the author's personal experience and on a complete review of world literature on the subject. Each of the eight chapters deals with a particular polymer or group of polymers and copolymers and terpolymers are also fully discussed. In addition to the analysis of the polymers the analysis of non-polymer components of the polymer, whether adventicious (water, solvents, monomers, catalyst residues, etc.) or deliberately added (processing additives, antioxidants, plasticisers, etc.) is covered at the end of the chapter or section.

  • Catalysis by Nonmetals

    Rules for Catalyst Selection
    • 1st Edition
    • Oleg V. Krylov
    • Ernest M. Loebl
    • English
    Catalysis by Non-metals: Rules of Catalyst Selection presents the development of scientific principles for the collection of catalysts. It discusses the investigation of the mechanism of chemosorption and catalysis. It addresses a series of properties of solid with catalytic activity. Some of the topics covered in the book are the properties of a solid and catalytic activity in oxidation-reduction reactions; the difference of electronegativities and the effective charges of atoms; the role of d-electrons in the catalytic properties of a solid; the color of solids; and proton-acid and proton-base properties of a surface. The catalytic activity and structure of solids are covered. The type of crystal lattice and crystalline lattice parameters are discussed. The text describes the decomposition of alcohols. A study of the dehydrogenation and hydrogenation reactions is presented. A chapter is devoted to the decomposition of inorganic hydrides. Another section focuses on the hydrogen-deuterium exchange and other simple reactions. The book can provide useful information to scientists, physicists, students, and researchers.

  • Sulphide Catalysts, Their Properties and Applications

    • 1st Edition
    • Otto Weisser + 1 more
    • English

  • The Elucidation of Organic Electrode Processes

    A Polytechnic Press of the Polytechnic Institute of Brooklyn Book
    • 1st Edition
    • P. Zuman
    • Louis Meites + 2 more
    • English
    The Cell Cycle: Gene-Enzyme Interactions focuses on the interaction of the genetic and enzymatic complements of a cell, as well as the control of genetic expression in bacterial cells. The selection first offers information on cell evolution and the thermodynamics and regulation of chromosome replication and cell division in Escherichia coli. Discussions focus on genome evolution, selection and thermodynamics, coordination between chromosome replication and cell division, and cellular response to nutritional alterations. The text then elaborates on temporal control of gene expression in bacteria, including rate of induced enzyme synthesis in synchronous populations; change in rate of induced enzyme synthesis and sequential gene replication; metabolic oscillations and the temporal control of enzyme synthesis; and DNA replication and the integration of cell growth and division. The publication examines synchrony and the formation and germination of bacterial spores and synthesis of macromolecules during the cell cycle in yeast. Topics include gene position and enzyme timing, synthesis of ribosomal and transfer RNA during the cell cycle, and analysis of synchrony during sporulation. The selection is highly recommended for readers wanting to study cell cycle.

  • Geotextiles and Geomembranes Handbook

    • 1st Edition
    • T.S. Ingold
    • English
    An essential introductory reference manual for anyone specifying, maintaining or manufacturing geotextiles and geomembranes.

  • Chemical Process Structures and Information Flows

    • 1st Edition
    • Richard S.H. Mah
    • Howard Brenner + 2 more
    • English
    Chemical Process Structures and Information Flows focuses on the role of computers in the understanding of chemical processes, including the use of simulation and optimization in computational problems. The book first underscores graphs and digraphs and pipeline networks. Discussions focus on cutsets and connectivity, directed graphs, trees and circuits, matrix representation of digraphs and graphs, reachability matrix, alternative problem formulations and specifications, and steady state conditions in cyclic networks. The manuscript also ponders on computation sequence in process flowsheet calculations and sparse matrix computation. The publication examines scheduling and design of batch plants, including scheduling of products and operations, characteristics of batch processes, branch and bound methods, and multipurpose batch plants. The text also elaborates on observability and redundancy and process data reconciliation and rectification. The manuscript is a valuable reference for chemical engineering students and readers interested in chemical processes and information flow.

  • Processing and Utilization of High-Sulfur Coals V

    Proceedings of the Fifth International Conference on Processing and Utilization of High-Sulfur Coals, October 25-28, 1993, Lexington, Kentucky, U.S.A.
    • 1st Edition
    • Volume 21
    • B.K. Parekh + 1 more
    • English
    Utilization of high sulfur coals is becoming increasingly difficult in view of tighter environmental regulations being imposed around the world. To meet the challenge of utilizing high sulfur coals without damaging the environment, many scientists and engineers around the world are engaged in developing novel technologies. In the U.S.A. alone, the federal government has spent about five billion dollars to achieve that goal.This conference, like its predecessors, emphasizes desulfurization with papers on physical and chemical cleaning as well as post-treatment and fluid-bed combustion technologies. Of the 45 papers submitted, 15 papers deal with physical cleaning and 7 deal with chemical cleaning of coal, suggesting that a major emphasis is still be placed on pre-cleaning of coal. The post-treatment technologies, being developed with the support of U.S. federal and state government agencies, emphasize removal of both SOx and NOx gases.The book will be of particular interest and benefit to researchers, graduate students and other people involved in coal processing, characterization and utilization; public policy making and administration related to energy conservation, economic development, and environmental protection; and investors in industry and new technology.

  • Plasma Diagnostics

    Surface Analysis and Interactions
    • 1st Edition
    • Volume 2
    • Orlando Auciello + 1 more
    • English
    Plasmas and their interaction with materials have become subjects of major interest because of their importance in modern forefront technologies such as microelectronics, fusion energy, and space. Plasmas are used in microelectronics to process semiconductors (etching of patterns for microcircuits, plasma-induced deposition of thin films, etc.); plasmas produce deleterious erosion effects on surfaces of materials used for fusion devices and spaceships exposed to the low earth environment.Diagnost... of plasmas and materials exposed to them are fundamental to the understanding of the physical and chemical phenomena involved. Plasma Diagnostics provides a comprehensive treatment of the subject.short version, TJE_Plasmas and their interaction with materials have become subjects of major interest because of their importance in modern forefront technologies such as microelectronics, fusion energy, and space. Diagnostics of plasmas and materials exposed to them are fundamental to the understanding of the physical and chemical phenomena involved. Plasma Diagnostics provides a comprehensive treatment of the subject.

  • Corrosion

    Corrosion Control
    • 2nd Edition
    • L L Shreir
    • English
    Corrosion, Volume 2: Corrosion Control deals with corrosion and corrosion control. Topics covered range from the design and economic aspects of corrosion to cathodic and anodic protection; pretreatment and design for metal finishing; protective action of metallic coatings; and methods of applying metallic coatings. Corrosion testing, monitoring, and inspection are also considered. This volume is comprised of 13 chapters; the first of which provides an overview of corrosion control, with emphasis on the classification of practical methods of corrosion control. Attention then turns to the economic aspects of corrosion; how corrosion control is implemented in chemical and petrochemical plants; and design considerations to prevent corrosion in buildings and structures. Design in marine engineering and in relation to welding and joining is also discussed. The chapters that follow focus on the principles and practical applications of cathodic and anodic protection; chemical and mechanical pretreatments for metal finishing; and design for corrosion protection by electroplated and paint coatings. Chemical conversion coatings and miscellaneous coatings such as vitreous enamel coatings are also considered. Finally, this book describes the conditioning of the atmosphere to reduce corrosion. Tables and specifications as well as terms and abbreviations are included. This book will be of value to students as well as workers and engineers involved in corrosion and corrosion control.

  • Porous Media

    Geometry and Transports
    • 1st Edition
    • Pierre Adler
    • Howard Brenner
    • English
    The goal of "Porous Media: Geometry and Transports" is to provide the basis of a rational and modern approach to porous media. This book emphasizes several geometrical structures (spatially periodic, fractal, and random to reconstructed) and the three major single-phase transports (diffusion, convection, and Taylor dispersion)."Porous Media" serves various purposes. For students it introduces basic information on structure and transports. Engineers will find this book useful as a readily accessible assemblage of al the major experimental results pertaining to single-phase transports in porous media. For scientists it presents the latest developments in the field, some of which have never before been published.

  • Biodegradable Plastics and Polymers

    Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan, November 9-11, 1993
    • 1st Edition
    • Volume 12
    • Y. Doi + 1 more
    • English
    In the past 25 years, plastic products have gained universal use not only in food, clothing and shelter, but also in the transportation, construction, medical and leisure industries. Whereas previously synthetic plastics were developed as durable substitute products, increasing concern for the global environment and solid waste management has resulted in an urgent demand for biodegradable plastics.The main topics of the Third International Scientific Workshop were as follows:1. Biodegradation of polymers and plastics2. Environmental degradation of plastics3. Synthesis and properties of new biodegradable plastic materials4. Biodegradation and morphologies of polymer blends5. Development of biodegradation test methods6. Governmental policy, regulation and standards.

  • Computational Methods in Reactor Shielding

    • 1st Edition
    • James Wood
    • English
    Computational Methods in Reactor Shielding deals with the mathematical processes involved in how to effectively control the dangerous effect of nuclear radiation. Reactor shielding is considered an important aspect in the operation of reactor systems to ensure the safety of personnel and others that can be directly or indirectly affected. Composed of seven chapters, the book discusses ionizing radiation and how it aids in the control and containment of radioactive substances that are considered harmful to all living things. The text also outlines the necessary radiation quantities and units that are needed for a systemic control of shielding and presents an examination of the main sources of nuclear radiation. A discussion of the gamma photon cross sections and an introduction to BMIX, a computer program used in illustrating a technique in identifying the gamma ray build-up factor for a reactor shield, are added. The selection also discusses various mathematical representations and areas of shielding theory that are being used in radiation shielding. The book is of great value to those involved in the development and implementation of systems to minimize and control the dangerous and lethal effect of radiation.

  • Reactor Operation

    • 1st Edition
    • J. Shaw
    • English
    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation. The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also explore the fuel leak detection and fuel movement in the nuclear reactor. This book will prove useful to nuclear engineers, physicists, and undergraduate and postgraduate students.

  • Advances in Transport Processes

    • 1st Edition
    • A.S. Mujumdar + 1 more
    • English
    The subject matter covered in this volume covers a wide scope. It contains critical reviews in many frontier areas of interest to engineers and applied scientists. Multiphase transport ranging from floc breakage to flow through multiphase media is discussed. Difficult problems of bubble growth and devolatilisation from polymeric melts are treated. The question of solid-liquid phase change with flow is considered and the emerging quantitation of web drying technology through mathematical modeling is covered. Transport phenomena in high-tech materials ranging from zeolite catalysts to liquid crystalline materials are covered and formidable problems of transport of gases in porous media, which have implications in many different technologies, are also addressed. Finally, applications of newer techniques in numerical computation of transport processes are highlighted.These authorative, evaluative and timely reviews of topics of current and potential interest will serve the needs of practising engineers as well as academic and industrial researchers.

  • Circulating Fluidized Bed Boilers

    Design and Operations
    • 1st Edition
    • Prabir Basu
    • English
    This book provides practicing engineers and students with insight into the design and operation of circulating fluidized bed (CFB) boilers. Through a combination of theoretical concepts and practical experience, this book gives the reader a basic understanding of the many aspects of this subject.Important environmental considerations, including solid waste disposal and predicted emissions, are addressed individually in separate chapters. This book places an emphasis on combustion, hydrodynamics, heat transfer, and material issues, and illustrates these concepts with numerous examples of present applications and past experience. This book also examines the relevance of design and feed-stock parameters to the operation of a CFB boiler; designs of mechanical components, including cyclones, air distributor grids, and solid recycle systems; and special problems CVB boilers present with construction materials.

  • Metallic Coatings for Corrosion Control

    Corrosion Control Series
    • 1st Edition
    • V. E. Carter
    • English
    Metallic Coatings for Corrosion Control describes how metal coatings can control corrosion, the selection process, preparations, suitability, limitations, and how coatings are applied. The book reviews the nature of corrosion, the forms of corrosion (even general, uneven general, even local, narrow pits, cracking), electrochemical mechanism of corrosion, effects of discontinuities in coatings, and economic considerations of coating. It describes pretreatments (such as removal of superficial corrosion, abrading, polishing), the coating processes (molten or spray application, chemical or vapor deposition, diffusion coating), and also coating performance. The rate of corrosion on different metals such as aluminum, cadmium, copper, gold, silver, or tin depends on the presence of an oxide film, solubility, electrodeposits, or tarnish blackening. Gold is resistant to corrosion and tarnishing except in aqua regia. The book recommends the following when the engineer is selecting a type of coating: the environment where it is exposed, the service life required, the substrate material, shape or size of the article, its decorative appeal, mechanical factors, and if there will be any subsequent fabrication. The book is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery or maritime equipment will also profit from reading it.

  • Unit Operations in Cane Sugar Production

    • 1st Edition
    • Volume 4
    • J.H. Payne
    • English
    An indispensable, practical guide for everyone involved in the processing of sugar cane. Confined to essentials, the book is a compact and concise delineation of the unit processes in the manufacture of raw sugar from sugar cane, giving recommended procedures for achieving optimum results.

  • Slurry Flow

    Principles and Practice
    • 1st Edition
    • C A Shook + 1 more
    • Howard Brenner
    • English
    Slurry Flow: Principles and Practice describes the basic concepts and methods for understanding and designing slurry flow systems, in-plan installations, and long-distance transportation systems. The goal of this book is to enable the design or plant engineer to derive the maximum benefit from a limited amount of test data and to generalize operating experience to new situations. Design procedures are described in detail and are accompanied by illustrative examples needed by engineers with little or no previous experience in slurry transport.The technical literature in this field is extensive: this book facilitates its use by surveying current research results and providing explanations of mechanistic flow models. This discussion of background scientific principles helps the practitioner to better interpret test data, select pumps, specify materials of construction, and choose measuring devises for slurry transport systems. The extensive range of topics covered in Slurry Flow: Principles and practice includes slurry rheology, homogeneous and heterogeneous slurry flow principles, wear mechanisms, pumping equipment, instrumentation, and operating aspects.

  • Annular Two-Phase Flow

    • 1st Edition
    • Geoffrey Hewitt
    • English
    Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.

  • Modern Energy Economy in Beet Sugar Factories

    • 1st Edition
    • Volume 10
    • K. Urbaniec
    • English
    This book is devoted to the problems of identifying the potential for, designing and implementing, energy-saving measures in beet sugar factories. As the sugar industries in various countries differ considerably with respect to the economic conditions for factory operation and the level of technological development, the problem range is very broad. It may include the elimination of faulty or unreliable auxiliary equipment, or the introduction of simple improvements in vapour distribution schemes, in factories operated in countries where the need for efficient energy utilization has not really been very urgent until now. On the other hand, there are sugar factories in some other countries where considerable achievements have been made in energy saving but where further progress may still be possible if more advanced engineering problems are solved.The author takes an interdisciplinary approach to its subject aimed at demonstrating how the energy demand of a sugar factory can be affected by the interactions between a number of factors, namely: layout and parameters of the energy conversion and distribution processes; layout and parameters of the sugar manufacturing process and by-processes; characteristics of the equipment and control systems; completeness and accuracy of the energy monitoring systems. The book consists essentially of three parts. In Chapters 1 to 3, some theoretical background is given and engineering principles for creating efficient energy conversion and utilization subsystems in sugar factories are reviewed. The second part - Chapters 4 to 7 - discusses recent developments in these areas and their importance to energy conversion and utilization in sugar factories. The presentation is illustrated with suitable practically-oriented examples based mostly on the author's experience gained from nine years working with an engineering company specializing in the design, erection and modernization of sugar factories, as well as five years of consulting and research for the sugar industry. Short examples are presented in Chapters 1, 2, 3 and 7, while in the third part of the book (Chapters 8 and 9) summaries are given of real-life design analyses of energy subsystems of sugar factories, characterized by different levels of sophistication of the energy economy.The book thus provides a systematic review which will be helpful to managers and technologists in sugar factories where the problem may arise of choosing the most appropriate set of measures that best fit the factory's unique needs. It can also be used in university-level courses on the energy economy of sugar factories, and will be of interest to design engineers and specialists engaged in research in the area.

  • Random Field Models in Earth Sciences

    • 1st Edition
    • George Christakos
    • English
    This book is about modeling as a prinicipal component of scientific investigations. In general terms, modeling is the funamental process of combining intellectual creativity with physical knowledge and mathematical techniques in order to learn the properties of the mechanisms underlying a physical phenomenon and make predictions. The book focuses on a specific class of models, namely, random field models and certain of their physical applications in the context of a stochastic data analysis and processing research program. The term application is considered here in the sense wherein the mathematical random field model is shaping, but is also being shaped by, its objects.

  • Manufacture and Refining of Raw Cane Sugar

    • 2nd Edition
    • Volume 2
    • V.E. Baikow
    • English
    Sugar Series, Vol. 2: Manufacture and Refining of Raw Cane Sugar focuses on the processes, methodologies, principles, and approaches involved in the manufacture and refining of raw cane sugar. The selection first offers information on sugar cane, harvesting and transportation to the factory, washing, disposal of wash-water and cleaning the juices, and extraction of juice. Discussions focus on disposal of bagasse, screw presses, cane carriers, juice cleaning, waste-water disposal, washing, cane weighing in field and factory, transportation, and sugar-producing plants. The manuscript then examines the sugar cane diffusion process, weighing, clarification, and liming of cane juice, filtration of mud from clarifiers, evaporation, and vacuum pans. The book ponders on boiling of raw sugar massecuites, crystallization by cooling and motion of low-grade massecuites and the exhaustion of final molasses, centrifugals and purging of massecuites, storing and shipping bulk sugar, and final molasses. The selection is a valuable source of data for researchers wanting to study the manufacture and refining of raw cane sugar.

Related subjects