Skip to main content
Elsevier

Books in Materials science

The Materials Science portfolio includes titles covering core knowledge and new research and applications across the field: nanotechnology and nanomaterials; polymers and plastics; textiles; composites and ceramics; electronic, magnetic, and optical materials; metals and alloys; biomaterials; surface and film science and coating technologies; materials chemistry, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world application examples provide valuable, actionable insights for researchers, students, and the corporate sector. Elsevier's Materials Science portfolio places special attention on areas of current and emerging interest such as additive manufacturing / 3D printing, graphene and 2D materials, smart materials, biomimetics... The content in Elsevier's Materials Science titles program addresses core challenges facing science and society: sustainable energy technologies, the circular economy, health and human welfare.

  • Nanolithography

    The Art of Fabricating Nanoelectronic and Nanophotonic Devices and Systems
    • 1st Edition
    • M Feldman
    • English
    Integrated circuits, and devices fabricated using the techniques developed for integrated circuits, have steadily gotten smaller, more complex, and more powerful. The rate of shrinking is astonishing – some components are now just a few dozen atoms wide. This book attempts to answer the questions, “What comes next?” and “How do we get there?”Nanolithograp... outlines the present state of the art in lithographic techniques, including optical projection in both deep and extreme ultraviolet, electron and ion beams, and imprinting. Special attention is paid to related issues, such as the resists used in lithography, the masks (or lack thereof), the metrology needed for nano-features, modeling, and the limitations caused by feature edge roughness. In addition emerging technologies are described, including the directed assembly of wafer features, nanostructures and devices, nano-photonics, and nano-fluidics.This book is intended as a guide to the researcher new to this field, reading related journals or facing the complexities of a technical conference. Its goal is to give enough background information to enable such a researcher to understand, and appreciate, new developments in nanolithography, and to go on to make advances of his/her own.

  • Thermosets and Composites

    Material Selection, Applications, Manufacturing and Cost Analysis
    • 2nd Edition
    • Michel Biron
    • English
    This book bridges the technology and business aspects of thermosets, providing a practical guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides information on material properties for each family of thermosets, and discusses the various processing options for each material type. He explains advantages and disadvantages of using thermosets and composites in comparison to competing materials and assesses cost aspects, enabling the reader to balance out technical and economic constraints when choosing a thermoset and processing technology for a given application.This second edition contains a new section on composites solutions for practical problems, gathering information on trends contributing to the breakthrough of composites in various sectors. Other new sections on specific crosslinking processes, processing trends, machinery and equipment manufacturers, applications, bio-sourced thermosets and natural fibers, and recycling of thermosets and composites are included. Case studies are provided, illustrating many design and production challenges. Furthermore, new market data and information about health and safety will be added. All data is fully updated throughout, with pricing in USD and EUR, and both ASTM (North American) and European standards.Thermosets and Thermoset Composites, Second Edition is the only book that gives in-depth coverage of a wide range of subject matters and markets, yet in brevity and concision in a single volume, avoiding the need of consulting a series of other specialized books. By providing the knowledge necessary for selecting a fabrication process, thermoset material and methods for determining the all important cost of thermoset parts this new edition is an invaluable decision-making aid and reference work for practitioners in a field with growing importance.

  • Surface Modification by Solid State Processing

    • 1st Edition
    • Rosa M. Miranda + 4 more
    • English
    Surface Modification by Solid State Processing describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, also changing surface chemistry. Surface conditions are increasingly demanding in industrial applications and surface modification can reduce manufacturing and maintenance costs, leading to improved component performance, reliability and lifetime. Friction-based technologies are promising solid state processing technologies, particularly for light alloys, in the manufacturing of composite surface and functionally graded materials This title is divided into five chapters, and after an introduction the book covers friction surfacing; friction stir processing; surface reinforcements of light alloys; and characterization techniques based on eddy currents.

  • Subsea Optics and Imaging

    • 1st Edition
    • John Watson + 1 more
    • English
    The use of optical methodology, instrumentation and photonics devices for imaging, vision and optical sensing is of increasing importance in understanding our marine environment. Subsea optics can make an important contribution to the protection and sustainable management of ocean resources and contribute to monitoring the response of marine systems to climate change. This important book provides an authoritative review of key principles, technologies and their applications.The book is divided into three parts. The first part provides a general introduction to the key concepts in subsea optics and imaging, imaging technologies and the development of ocean optics and colour analysis. Part two reviews the use of subsea optics in environmental analysis. An introduction to the concepts of underwater light fields is followed by an overview of coloured dissolved organic matter (CDOM) and an assessment of nutrients in the water column. This section concludes with discussions of the properties of subsea bioluminescence, harmful algal blooms and their impact and finally an outline of optical techniques for studying suspended sediments, turbulence and mixing in the marine environment. Part three reviews subsea optical systems technologies. A general overview of imaging and visualisation using conventional photography and video leads onto advanced techniques like digital holography, laser line-scanning and range-gated imaging as well as their use in controlled observation platforms or global observation networks. This section also outlines techniques like Raman spectroscopy, hyperspectral sensing and imaging, laser Doppler anemometry (LDA) and particle image velocimetry (PIV), optical fibre sensing and LIDAR systems. Finally, a chapter on fluorescence methodologies brings the volume to a close.With its distinguished editor and international team of contributors, Subsea optics and imaging is a standard reference for those researching, developing and using subsea optical technologies as well as environmental scientists and agencies concerned with monitoring the marine environment.

  • Biotextiles as Medical Implants

    • 1st Edition
    • M W King + 2 more
    • English
    Textiles play a vital role in the manufacture of various medical devices, including the replacement of diseased, injured or non-functioning organs within the body. Biotextiles as medical implants provides an invaluable single source of information on the main types of textile materials and products used for medical implants. The first part of the book focuses on polymers, fibers and textile technologies, and these chapters discuss the manufacture, sterilization, properties and types of biotextiles used for medical applications, including nanofibers, resorbable polymers and shaped biotextiles. The chapters in part two provide a comprehensive discussion of a range of different clinical applications of biotextiles, including surgical sutures, arterial prostheses, stent grafts, percutaneous heart valves and drug delivery systems.This book provides a concise review of the technologies, properties and types of biotextiles used as medical devices. In addition, it addresses the biological dimension of how to design devices for different clinical applications, providing an invaluable reference for biomedical engineers of medical textiles, quality control and risk assessment specialists, as well as managers of regulatory affairs. The subject matter will also be of interest to professionals within the healthcare system including surgeons, nurses, therapists, sourcing and purchasing agents, researchers and students in different disciplines.

  • Thermal Stresses and Temperature Control of Mass Concrete

    • 1st Edition
    • Zhu Bofang
    • English
    Methods of controlling mass concrete temperatures range from relatively simple to complex and from inexpensive too costly. Depending on a particular situation, it may be advantageous to use one or more methods over others. Based on the author’s 50 years of personal experience in designing mass concrete structures, Thermal Stresses and Temperature Control of Mass Concrete provides a clear and rigorous guide to selecting the right techniques to meet project-specific and financial needs. New techniques such as long time superficial thermal insulation, comprehensive temperature control, and MgO self-expansive concrete are introduced.

  • Recent Advances in Magnetic Insulators - From Spintronics to Microwave Applications

    • 1st Edition
    • Volume 64
    • English
    This volume of Solid State Physics provides a broad review on recent advances in the field of magnetic insulators, ranging from new spin effects to thin film growth and high-frequency applications. It covers both theoretical and experimental progress. The topics include the use of magnetic insulators to produce and transfer spin currents, the excitation of spin waves in magnetic insulators by spin transfer torque, interplay between the spin and heat transports in magnetic insulator/normal metal heterostructures, nonlinear spin waves in thin films, development of high-quality nanometer thick films, and applications of magnetic insulators in rf, microwave, and terahertz devices, among others. The volume not only presents introductions and tutorials for those just entering the field, but also provides comprehensive yet timely summaries to specialists in the field. Solid-state physics is the branch of physics primarily devoted to the study of matter in its solid phase, especially at the atomic level. This prestigious series presents timely and state-of-the-art reviews pertaining to all aspects of solid-state physics.

  • Laser Processing of Materials in Japan

    Research, Development and Applications
    • 1st Edition
    • Japan Technical Information Japan Technical Information Se
    • English
    Please note this is a short discount publication.Up until now, information on Japanese research efforts in the field of laser material processing has been difficult to collate - LASER PROCESSING OF MATERIALS IN JAPAN provides all this information in one exhaustive reference work.The report describes the various Japanese techniques for the creation of advanced materials by using laser-technology, and details the laser generation equipment being developed in Japan. Also provided are the names and addresses of principal Japanese workers in a variety of laser-processing fields, together with lists of the main Japanese research initiatives.

  • Solid State Electrochemistry and its Applications to Sensors and Electronic Devices

    • 1st Edition
    • Volume 45
    • K.S. Goto
    • English
    Based on the author's lecture notes for a course on Physical Chemistry of Oxides at High Temperatures held at the Graduate School of the Tokyo Institute of Technology, this book examines the micromechanism of migration of ions and electronic defects contained in solid and liquid oxides at high temperature.The book is primarily designed for use as a graduate-level text and includes 150 problems for students. The emphasis is on introduction of simple theories for transport properties of oxides, which can be universally used at low and high temperatures, for various combinations of oxides.

  • Metal-Ceramic Interfaces

    Proceedings of an International Workshop
    • 1st Edition
    • M. Rühle + 3 more
    • English
    As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomi... of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.

  • Characterization of Composite Materials

    • 1st Edition
    • Hatsuo Ishida
    • English
    Now, in one book, there is coverage of modern surface analytical techniques applied specifically to composite materials. Centering around spectroscopic characterization of composites and polymer-matrix composities, Characterization of CompositeMaterials covers techniques with a demonstrated use for composite stuides along with promising new techniques such as STM/AFM and special Raman spectroscopy. Each chapter will cover a specific technique and will provide basic background information, theories of the technique, and application examples, including futuristic state-of-the-art applications. Detailed information about the individual characterization techniques mentioned can be found in the Encyclopaedia of Materials Cahracterization, the companion volume in the Materials Characterization Series: surfaces, interfaces, thin films.

  • Fundamentals and Applications of Ternary Diffusion

    Proceedings of the International Symposium on Fundamentals and Applications of Ternary Diffusion, Hamilton, Ontario, Canada, August 27-28, 1990
    • 1st Edition
    • G. R. Purdy
    • English
    This international symposium held in honor of Professor J\S\Kirkcaldy, will comprise review and research papers covering both fundamental and applied aspects of ternary diffusion. Over twenty individual contributions by internationally recognized authorities in the field, will be included.

  • Liquid Crystalline Polymers

    Proceedings of the International Workshop on Liquid Crystalline Polymers, WLCP 93, Capri, Italy, June 1-4 1993
    • 1st Edition
    • C. Carfagna
    • English
    The International Workshop on Liquid Crystalline Polymers (LCPs) held in June 1993 in Italy attracted many of the leading researchers in this area of polymer science. The meeting provided a forum for the exchange of research and ideas on current developments and future research and applications of liquid crystalline polymers.This volume consists of a selection of the best papers presented at the meeting covering synthesis and characterization, liquid crystalline thermosets, rheology, blends and composites containing LCPs and transport properties.

  • Metal Powders

    A Global Survey of Production, Applications and Markets
    • 1st Edition
    • J. Capus
    • English
    Please note this is a Short Discount publication.This in–depth market and technology report surveys the markets, applications and manufacturing processes for metal powders. Coverage is given to both ferrous and non–ferrous metal powders with the emphasis on the more commercially significant materials such as iron and steel, stainless and tool steels, copper and copper–base alloys, aluminium, tin and nickel. Current and future markets are reviewed from a global perspective: consumption figures are analyzed for the major economic zones: Northern America, Europe, Japan. The major factors likely to impact on future metal powder consumption are examined and forecasts are presented for the main categories to the end of the decade. The report is completed by a comprehensive global survey of the relevant activities of the major powder–producing companies and industry trade associations.

  • Cyclic Deformation and Fatigue of Metals

    • 1st Edition
    • Volume 78
    • M. Bílý
    • English
    An integral review is given in this book on the fatigue phenomenon covering the fundamentals of fatigue damage initiation, relevant factors influencing fatigue crack propagation and fatigue life, random load analysis, and simulation for theoretical and experimental fatigue life assessment. The entire chain of problems related to fatigue of metals and structural components is covered. Specifically, it describes the low-cycle plastic properties and statistically interprets the material stress reaction, examining original results of investigations on inelastic deformations under high cycle cyclic loading and correlating them with a number of use parameters. The limit states of bodies with primary defects and their resistance to fatigue crack propagation are discussed. Measurements, analysis and real-time modelling of operating loads for experimental fatigue life verification are reviewed as well as introducing some new fatigue damage accumulation hypotheses based on dissipated energy. Various operating and environmental factors of the fatigue life are analyzed, including temperature, metal structures, corrosive environment, stress-strain amplitudes and their changes, random load (strain) properties, stress gradient frequency, mean level, etc. The work is intended for all those involved in research and development in the metal, machine and structure fields.

  • Production, Refining, Fabrication and Recycling of Light Metals

    Proceedings of the International Symposium on Production, Refining, Fabrication and Recycling of Light Metals, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • Michel Bouchard + 1 more
    • English
    The Proceedings describe recent developments in the field of smelting, refining and fabrication of aluminum and magnesium in Canada and abroad.

  • Corrosion Testing for Metal Finishing

    Institute of Metal Finishing
    • 1st Edition
    • V. E. Carter
    • English
    Corrosion Testing for Metal Finishing provides metal finishers with a range of test methods as well as guidance in the choice of method for a particular finish. There is a wide range of corrosion test methods available, the majority being the subject of Standard Specifications or being brought to Standards status. With many product Standards there is a choice of test methods available to met the Standard requirements. It is hoped that the relevant choice may be obtained more easily as a result of the information published in this book. The book outlines the apparatus and procedure for each test method and discusses its applicability to different metals and finishes. Indications are given of the nature and extent of the corrosion which develops in the test. Reference is also made to the relevant Standards for each test method. The book begins with a discussion of the basic requirements for corrosion testing of finished metal products. Subsequent chapters are devoted to testing procedures such as humidity tests, salt fog tests, industrial atmosphere test, porosity test, and anti-perspiration tests.

  • Diffusion Bonding of Materials

    • 1st Edition
    • N.F. Kazakov
    • English
    Diffusion Beading of Materials is an attempt to pool the experience in vacuum diffusion bonding accumulated by a number of mechanical engineering works, research establishments, and colleges. The book discusses the principal bonding variables and recommended procedures for diffusion bonding in vacuum; the equipment for diffusion bonding and production rate; and the mechanization and automation of equipment. The text also describes the diffusion bonding of steels; the bonding of cast iron and cast iron to steel; and the bonding of dissimilar metals and alloys. The bonding of refractory and active metals and their alloys; the bonding of high-temperature alloys, nickel and nickel alloys; and the bonding of cemented carbides and of a cemented carbide to steel are also considered. The book further tackles the repair and reconditioning by diffusion bonding; the bonding of porous materials; and diffusion metallurgy. The text also encompasses nonmetals and their joining to metals; quality control of diffusion-bonded joints; accident prevention; and cleanliness in vacuum diffusion bonding.

  • Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy

    • 1st Edition
    • R.S. Salter + 2 more
    • English
    Describes current advances in metallurgical processes applied to gold extraction.

  • Applied Electromagnetics in Materials

    Proceedings of the First International Symposium, Tokyo, 3-5 October 1988
    • 1st Edition
    • K. Miya
    • English
    The proceedings of this International Symposium focus on recent advances and current research in the study of electromagnetic phenomena in advanced materials, and the potential applications of such research in a variety of areas, including non-destructive testing, steel-making, and nuclear and electrical engineering. Also discussed is the effect of electromagnetic fields on the micro- and macromechanics of solid materials, and the application of electromagnetics to the preparation and characterization of new superconducting materials. This is a valuable account of current research in an increasingly topical area which will be of interest to materials scientists working on advanced materials and to electrical, mechanical and nuclear engineers interested in the application of electromagnetic forces in industry.

  • Data Book of Thermoset Resins for Composites

    Edition 1
    • 1st Edition
    • T.F. Starr
    • English
    Please note this is a Short Discount publication.Thermose... resins continue to remain the principal matrix of reinforced plastic composite components. Now you can refer to information on thermoset resins available around the world – in a single Data Book.The Data Book comes with a clear, standardised layout to compare between competitive resins. Each resin is listed alphabetically, first by country of manufacture, then by manufacturer. The use and application of each resin is clearly outlined.Contact details are readily and immediately available, making it easy to follow up information. Trade names, sales offices, local agents and main distributors are also provided.The Data Book also provides an understanding of the respective chemistry, properties, structure, curing mechanism and manufacture of each resin, under its appropriate classification – with sub–divisions by chemical type –acrylic, bismaleimides, bisphenols, epoxides, furans, phenolics, polyimides, polyesters or vinyl ester.With its carefully compiled address, telephone and facsimile number directory, the Data Book is an up–to–date source of readily available and complete information.Data Book of Thermoset Resins for Composites is required reading for all those concerned in any way with the manufacture, marketing, use and specification of thermoset resin based composites.

  • Production and Electrolysis of Light Metals

    Proceedings of the International Symposium on Production and Electrolysis of Light Metals, Halifax, August 20-24, 1989
    • 1st Edition
    • B. Closset
    • English
    Production and electrolysis of light metals - smelter operations, aluminum casting, aluminum melt treatment and control, electrolysis of light metals: magnesium and aluminum. Electrolysis of light metals: lithium, titanium and gallium. Reduction and production of light metals.

  • Thin Films for Emerging Applications

    • 1st Edition
    • Volume 16
    • Maurice H. Francombe
    • English
    Following in the long-standing tradition of excellence established by this serial, this volume provides a focused look at contemporary applications. High Tc superconducting thin films are discussed in terms of ion beam and sputtering deposition, vacuum evaporation, laser ablation, MOCVD, and other deposition processes in addition to their ultimate applications. Detailed treatment is also given to permanent magnet thin films, lateral diffusion and electromigration in metallic thin films, and fracture and cracking phenomena in thin films adhering to high-elongation substrates.

  • Mechanics of Composite Materials

    A Unified Micromechanical Approach
    • 1st Edition
    • Volume 29
    • Jacob Aboudi
    • English
    In the last decade the author has been engaged in developing a micromechanical composite model based on the study of interacting periodic cells. In this two-phase model, the inclusion is assumed to occupy a single cell whereas the matrix material occupies several surrounding cells. A prominent feature of the micromechanical method of cells is the transition from a medium, with a periodic microstructure to an equivalent homogeneous continuum which effectively represents the composite material. Of great importance is the significant advantage of the cells model in its capability to analyze elastic as well as nonelastic constituents (e.g. viscoelastic, elastoplastic and nonlinear elastic), thus forming a unified approach in the prediction of the overall behaviour of composite material. This book deals almost exclusively with this unified theory and its various applications.

  • Proceedings of the International Symposium On: Advanced Structural Materials

    Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy
    • 1st Edition
    • D.S. Wilkinson
    • English
    This International Symposium is sponsored by the Materials Engineering Section and the Basic Sciences Section of the Metallurgical Society of CIM and co-sponsored by the Canadian Ceramic Society. Topics covered include metal matrix composites, structural ceramics, polymeric composite materials, powder metallurgical materials and interfaces.

  • Graphite Fluorides

    • 1st Edition
    • Volume 8
    • N. Watanabe + 2 more
    • English
    This volume reviews the preparation, structures, physicochemical properties and applications of graphite fluorides, mainly based on the results obtained by the authors. Their interest in graphite fluorides stemmed from research on the ``anode effect'', in electrolytic production of fluorine gas in KF.2HF melt using carbon electrodes.The formation of a thin graphite fluoride film on carbon anodes made it difficult to continue the electrolysis of KF.2HF at a high current density. To elucidate this phenomenon studies on graphite fluoride were initiated. In the course of these systematic studies, the use of graphite fluoride in high-energy batteries became successful: a new graphite fluoride (C2F)n was found; and another fluorineographite intercalation compound with ionic bonding, CxF, was synthesized. During this research it was established that CxF is closely associated with the ``anode effect''.The book will be of interest to all those involved in the study and research of graphite fluorides, particularly fluorine chemists, electrochemists, and fluorine and battery companies.

  • Inorganic Polymeric Glasses

    • 1st Edition
    • Volume 15
    • Richard C. Ropp
    • English
    The author describes a novel method of preparing hydrolysis-stable non-silicate glasses which is based on experimental work accomplished over the past twenty years. As such, the method is the beginning of a new approach to glass-making by the use of a molecularly-polymeri... precursor. The book elucidates the technical details required to produce such molecularly-polymeri... glasses from carefully prepared inorganic molecular monomers. Essentially, only silicate-based glasses have been known to be stable, whereas non-silicate glasses could not be attributed with such properties. Such glasses have, therefore, not found widespread usage in industry. The new phosphate glasses described here exhibit stabilities superior to many of the silicate glasses. For example, the nuclear-waste glass shows no measurable loss at all in boiling water, something entirely foreign to the zinc borosilicate glasses developed for nuclear waste encapsulation in the U.S. by Battelle-Northwest. The exceptional stability of the new glasses is achieved by selecting an inorganic compound capable of being polymerized, and then causing it to polymerize in a proper manner, in the absence of chain-stoppers. To obtain glasses equal or superior in hydrolysis stability to silicate-based systems it is imperative to employ molecular polymerization in situ, starting from carefully prepared precursors of exact stoichiometric proportion. Researchers in glass and glass properties will find this volume extremely useful and those involved in organic polymers will be intrigued by the similarities and disparities of the two systems.

  • Eurogel '91

    Progress in Research and Development of Processes and Products from Sols and Gels
    • 1st Edition
    • S. Vilminot + 2 more
    • English
    Eurogel '91 is the second conference to report on the developments in research and technology of European laboratories and industry. The volume focuses on the scientific and technological progress in the field, as well as providing a global overview of the latest developments. The fifty presented papers report on many new themes and research groups.Expansion in the utilization of the sol-gel process for new products and processes is developing steadily. Application requires an interdisciplinary effort beginning with application orientated fundamental research and ending up with engineering and technology. This interdisciplinary contact can be enhanced by closer cooperation between research and industry. In particular, potential users of innovative materials should become more aware of the possibilities connected with sol-gel technologies. At present the sol-gel process is considered as one of the most important technologies for developing innovative glasses, ceramics and composites. The contributions in this volume will be of interest to all those who are involved in the development potential of industrial and market needs.

  • F. Weinberg International Symposium on Solidification Processing

    Proceedings of the F. Weinberg International Symposium on Solidification Processing, Hamilton, Ontario, August 27-29, 1990
    • 1st Edition
    • J. E. Lait + 1 more
    • English
    This international symposium is in honour of Professor\F\Weinberg who will be retiring from the University of British Columbia this year, following a distinguished career. Six sessions have been organized on Fundamentals of Solidification, Non-ferrous Casting Processes, Continuous and Static Casting of Cast Iron, Novel Solidification Studies and Semiconductor and Optoelectronic Crystal Growth, addressing the state-of-the art in each of these areas. Keynote speakers for the six sessions are: Dr\K\Jackson, Dr\N\Bryson, Prof\H\A\Frederiksso... Prof\I\Minkoff, Prof\M\C\Flemings and Prof\R\Brown.

  • Advanced Materials in Japan

    Source Book 1992
    • 1st Edition
    • COMLINE International COMLINE International Corp.
    • English
    Please note this is a Short Discount publication.Advanced Materials in Japan: Source Book 1992 offers the reader news of all the developments which have taken place over the last year. The Source Book is divided into chapters based on the divisions of news in New Materials in Japan – Metals & Alloys; Ceramics; Composites; Electronic & Optoelectronic Materials; Magnetic Materials; Plastics; Materials & The Environment; Medical Materials and Textiles, each introduced by an expert in these particular areas and discussing the implications of the information to non–Japanese industry.In addition, the Source Book includes a chapter devoted to business/market information – company mergers acquisitions etc., together with an overview of the Japanese approach to advanced materials and highlighting all major research initiatives, research programmes etc.

  • Inorganic Fibres & Composite Materials

    A Survey of Recent Developments
    • 1st Edition
    • P. Bracke + 2 more
    • English
    A compendium of the current state-of-the-art in the technology of inorganic fibre manufacture and its use in the development of new high grade composite materials. Provides comprehensive information that is well in advance of industrial realization with invaluable insight relating to development and expected future trends. Specific entries are provided for the most important types of fibres known to date, each type discussed under manufacture, post-treatments, properties and uses. Also includes high quality photomicrographs, diagrams of the process techniques and molecular structures, bibliographical data, and helpful summaries in tabular form. Lists over 870 patent references.

  • Joining of Advanced Materials

    • 1st Edition
    • Messler + 1 more
    • English
    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, and composites with polymeric, metallic, ceramic, intermetallic and carbon matrices in similar and dissimilar combinations. Suitable for undergraduate and graduate students in engineering in addition to practicing engineers, this book treats in detail mechanical joining with conventional and advanced fasteners or integral design features, adhesive bonding, fusion and non-fusion welding, brazing, soldering, thermal spraying, and synergistic combinations of weld-bonding, weld-brazing, rivet-bonding. In addition, the book addresses materials issues, joint design, production processing, quality assurance, process economics, and joint performance in service.

  • Mechanics of Material Interfaces

    Proceedings of the Technical Sessions on Mechanics of Material Interfaces Held at the ASCE/ASME Mechanics Conference, Albuquerque, New Mexico, June 23-26, 1985
    • 1st Edition
    • Volume 11
    • A.P.S. Selvadurai + 1 more
    • English
    The category of problems which examines the mechanical behaviour of contact regions constitutes an important branch of applied mechanics with extensive engineering applications. The results of such research can be applied to the study of mechanics of composite materials, tribology, soil-foundation interaction, mechanics of rock interfaces, modelling of damage phenomena and micro-mechanics. In classical studies, the modelling of interface responses has focussed on purely idealized forms of interface phenomena which range from frictionless contact to bonded contact, with Coulomb friction or finite friction occupying an intermediate position. Current research has attempted to improve such modelling by endowing the interface with its own characteristic constitutive responses. This research indicates the significant manner in which non linear, frictional, dilatant, hardening and softening interface constitutive responses can influence the global and local interface responses of engineering interest.The technical sessions held in New Mexico (sponsored by the Elasticity Committee of the Engineering Mechanics Division of the American Society of Civil Engineers) brought together new advances in the theoretical formulation, analysis and the application of material interface modelling to problems of engineering interest. This book contains the papers presented plus invited contributions from leading researchers.

  • The Reinforced Plastics Handbook

    • 1st Edition
    • J. Murphy
    • English
    The Handbook of Reinforced Plastics is a complete and practical manual for specifying and selecting reinforced plastic products and services. The handbook covers all materials and classes of equipment currently available, with over 550 pages of editorial, illustrations and tables.

  • The Chemistry of Non-Sag Tungsten

    • 1st Edition
    • L. Bartha + 3 more
    • English
    Non-sag (NS) tungsten is a dispersion-strengthe... microalloy with elemental potassium, which is contained as microscopic bubbles in the tungsten lattice. Under working conditions in an incandescent lamp the potassium is a gas under high pressure. These gas bubbles essentially prevent the recrystallization of the tungsten wire and are responsible for the outstanding creep resistance of NS tungsten at the extremely high temperatures of a glowing lamp filament. More than 90% of NS tungsten is used for incandescent lamps. In addition, small amounts are used as defroster heating wires in automobile windshields and as heating wire coils for aluminium evaporation in metallization applications.The presented papers deal with the chemical reactions and the chemical compounds occurring along the path from tungsten raw materials to the final NS tungsten filament; a compendium of present knowledge on the different chemical aspects of NS tungsten manufacture is presented. It is composed of nine individual papers, each of them written by experts working in the field.

  • The Analysis of Plastics

    • 1st Edition
    • R Belcher
    • English
    Covering all aspects of the analysis of plastics by chemical and physical methods, this book is based on both the author's personal experience and on a complete review of world literature on the subject. Each of the eight chapters deals with a particular polymer or group of polymers and copolymers and terpolymers are also fully discussed. In addition to the analysis of the polymers the analysis of non-polymer components of the polymer, whether adventicious (water, solvents, monomers, catalyst residues, etc.) or deliberately added (processing additives, antioxidants, plasticisers, etc.) is covered at the end of the chapter or section.

  • Strength of Metals and Alloys (ICSMA 8)

    Proceedings of the 8th International Conference on the Strength of Metals and Alloys Tampere, Finland, 22-26 August 1988
    • 1st Edition
    • P. O. Kettunen + 2 more
    • English
    Containing almost 250 technical and review papers, these proceedings form an authoritative, state-of-the-art review of this important multidisciplinary topic. Emphasis is placed on the study of the strength of mechanical properties of materials and their dependence on the microstructure and defect arrangements. Areas covered include: dislocations; dislocation arrangements; plastic deformation; strengthening mechanisms; cyclic deformation and fatigue; plastic deformation at high temperatures; fracture; modern strengthening methods in steels; boundaries and interfaces.

  • Compound Semiconductor Device Physics

    • 1st Edition
    • Sandip Tiwari
    • English
    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those interested in silicon devices. Each chapter ends with exercises that have been designed to reinforce concepts, to complement arguments or derivations, and to emphasize the nature of approximations by critically evaluating realistic conditions.

  • Treatise on Materials Science and Technology

    Volume 4
    • 1st Edition
    • Herbert Herman
    • English
    Treatise on Materials Science and Technology, Volume 4 covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book covers articles on advanced techniques by which thin films may be characterized; on diffusion in substitutional alloys; and on solid solution strengthening in face-centered cubic alloys. The text also includes articles on the thermodynamics of binary ordered intermetallic phases; and the major aspects of metal powder processing. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Ceramics Drying

    • 1st Edition
    • R. W. Ford
    • English
    Describes the drying behaviour of clay-based and non-clay ceramics in terms of the external conditions influencing the rate of evaporation, and the internal mechanism with reference to moisture movement and shrinkage. The work mainly considers the practical aspects relating to problems and faults which arise during the drying of a preshaped article, although a theoretical treatment of the drying processes is provided for those requiring a deeper knowledge of this important subject.

  • Advanced Materials 1991-1992

    I. Source Book
    • 1st Edition
    • J. Binner
    • English
    Advanced Materials 1991-1992, I. Source Book focuses on the properties, characteristics, reactions, applications, and composition of ceramics, composites, and plastics. The publication first elaborates on ceramics, including markets, materials, applications, processing, equipment, standards, health, safety, the environment, research initiatives, and industry news. Topics include joint ventures/agreements, powder processing, furnaces, bioceramics, electronics, superconductors, oxide films, silica, sensors, and superconductors. The manuscript also takes a look at composites, as well as markets, materials, applications, processing, non-destructive evaluation, testing, health, safety, and the environment, research initiatives, and industry news. Concerns include restructuring, takeovers and mergers, recycling, health and safety, test development, data generation, manufacturing processes, tooling, coatings, general engineering, aerospace, automotive, and boom in advanced composites. The book then ponders on plastics, including markets, materials, applications, processing, equipment, health, safety, the environment, and industry news. The publication is a valuable reference for readers interested in the properties, applications, processing, and composition of ceramics, composites, and plastics.

  • High Temperature Aluminides and Intermetallics

    Proceedings of the Second International ASM Conference on High Temperature Aluminides and Intermetallics, September 16-19, 1991, San Diego, CA, USA
    • 1st Edition
    • S.H. Whang + 2 more
    • English
    This volume of proceedings is concerned with an increasingly important area, that of intermetallics and high temperature aluminides, which has recently been attracting a great deal of attention. Nearly 150 papers presented at the meeting held in San Diego in September 1991 are reproduced here. They cover a wide range of related topics such as the bonding characteristic and alloying behaviour of TiA1 intermetallic compounds and the cleavage fracture of ordered intermetallic alloys. All the papers have been reviewed according to the standards set by Materials Science and Engineering. This book will be of interest to metallurgists and materials scientists working with composites who are interested in the latest developments in this fast–moving field.

  • Mechanic and Dielectric Properties

    Advances in Research and Development
    • 1st Edition
    • Volume 17
    • Maurice H. Francombe
    • English
    Mechanic and Dielectric Properties deals with the mechanical and dielectric properties of thin films. Topics covered range from the deposition and mechanical properties of superlattice thin films to the preparation of hard coatings by sputtering and arc evaporation. The use of thin films in microwave acoustics is also discussed, along with ferroelectric films for integrated electronics and the physics, chemistry, and technology of electrochromic tungsten-oxide-based thin films. Comprised of five chapters, this volume begins with an analysis of the growth, characterization, and mechanical behavior of films comprising multilayers primarily of metal and refractory metallic compound components. The next chapter reviews the mechanical properties of hard coatings prepared by sputtering and arc evaporation, together with the influence of multilayer and gradient structures, and of film crystallinity, crystal orientation, and morphology, on properties such as hardness, coating smoothness, and friction behavior. Subsequent chapters focus on the unique role played by piezoelectric films in signal processing devices utilizing bulk or surface acoustic waves; the properties and applications of ferroelectric films in integrated electronics; and the underlying physics and chemistry of electrochromic tungsten-oxide-based thin films. This book should be of interest to physicists.

  • Ferrous and Non-Ferrous Alloy Processes

    Proceedings of the International Symposium on Ferrous and Non-Ferrous Alloy Processes, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • R. A. Bergman
    • English
    The Proceedings focus primarily on alloys used in the iron and steel industry. Operating papers discuss the production of stainless steel from nickel ore by combining the Krupp-Renn with the BOF process, the production of ferro-nickel by a novel electric furnace process and chromium containing iron in the BOF, as well as furnace lining problems in ferro alloy smelting. A number of papers deal with various aspects of ferro-manganese production and ferro-molybdenum. The use of engineered carbide desulphurizer and the application of innovative cored wire in steel making is highlighted. Studies into the production of titanium silicide and the process leading to the recovery of vanadium from Suncor flyash is presented. Results of experimental work dealing with the preparation of nickel chromium alloys from Bird River chromite and nickel sulphide are discussed.

  • Mechanical Behaviour of Materials - VI

    Proceedings of the Sixth International Conference, Kyoto, Japan, 29 July - 2 August 1991
    • 1st Edition
    • M. Jono + 1 more
    • English
    Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.

  • Radiation Damage of Structural Materials

    • 1st Edition
    • Volume 79
    • J. Koutský + 1 more
    • English
    Maintaining the integrity of nuclear power plants is critical in the prevention or control of severe accidents. This monograph deals with both basic groups of structural materials used in the design of light-water nuclear reactors, making the primary safety barriers of NPPs. Emphasis is placed on materials used in VVER-type nuclear reactors: Cr-Mo-V and Cr-Ni-Mo-V steel for RPV and Zr-Nb alloys for fuel element cladding.The book is divided into 7 main chapters, with the exception of the opening one and the chapter providing a phenomenological background for the subject of radiation damage. Chapters 3-6 are devoted to RPV steels and chapters 7-9 to zirconium alloys, analysing their radiation damage structure, changes of mechanical properties due to neutron irradiation as well as factors influencing the degree of their performance degradation. The recovery of damaged materials is also discussed. Considerable attention is paid to a comparison of VVER-type and western-type light-water materials.This monograph will be of great value to postgraduate students in nuclear engineering and materials science, and for designers and research workers in nuclear energy.

  • Materials Handling in Pyrometallurgy

    Proceedings of the International Symposium on Materials Handling in Pyrometallurgy, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • C. Twigge-Molecey + 1 more
    • English
    This book which describes the world of metallurgical processing is influenced by a variety of factors not directly metallurgical. One major factor in all applications is materials handling. In Pyro-metallurgical processes, the processes are interconnected by materials handling systems which often require a major percentage of plant cost. The systems include sampling, storage, weighing, feeding and transporting of materials which all actively affect the performance of the metallurgical processes. Increasing productivity and improvements to plant environment demand that materials handling be improved. At the same time, sophisticated sampling and control systems are required to optimize the recipes and allow controlled reactions. By using handling technologies that accommodate both the process and the environment, sustainable improvements can be made.

  • Polymers for Electronic & Photonic Application

    • 1st Edition
    • C. P. Wong
    • English
    The most recent advances in the use of polymeric materials by the electronic industry can be found in Polymers for Electronic and Photonic Applications. This bookprovides in-depth coverage of photoresis for micro-lithography, microelectronic encapsulants and packaging, insulators, dielectrics for multichip packaging,electronic and photonic applications of polymeric materials, among many other topics. Intended for engineers and scientists who design, process, and manufacturemicroelec... components, this book will also prove useful for hybrid and systems packaging managers who want to be informed of the very latest developments inthis field.

  • Organic Materials for Photonics

    Science and Technology
    • 1st Edition
    • G. Zerbi
    • English
    Polyconjugated organic materials are revealing amorphous electrical and non-linear optical properties; this fact is opening up a whole new field of Materials Science aimed at the development of new technologies. For many years inorganic materials were studied mostly for non-linear optical properties. When organic molecules began to show larger and faster responses, both physical chemists and organic chemists became involved in understanding the physical phenomena at a molecular level, with the hope of synthesizing new and better molecular systems. The non-linear optical responses of this class of organic materials are presently attracting considerable attention as an active field of research both in academic and industrial laboratories.Due to the variety of problems and techniques involved, students and beginners with different backgrounds who approach polyconjugated materials do not find it an easy field to enter. This book introduces in a comprehensive and tutorial way the necessary concepts and relevant references which will help the reader to grasp the fundamental concepts of polyconjugated organic materials and perceive the relations between them.

  • Bioceramics

    Proceedings of the 7th International Symposium on Ceramics in Medicine
    • 1st Edition
    • Ö.H. Andersson
    • English
    The primary forum for presentation of new work in the field of bioceramics is the annual International Symposium on Ceramics in Medicine. The chapters of this book represent the proceedings of the 7th meeting in this important series, held in Turku, Finland, in July 1994. The conference attracted a multidisciplinary audience from the bioceramics community, including leading academic and industrial scientists, manufacturers and regulators. The volume comprises 69 articles.

Related subjects