Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • The Iron Blast Furnace

    Theory and Practice
    • 1st Edition
    • J. G. Peacey + 1 more
    • D. W. Hopkins
    • English
    The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.

  • Introduction to the Theory of Shells

    Structures and Solid Body Mechanics
    • 1st Edition
    • Clive L Dym
    • B. G. Neal
    • English
    Introduction to the Theory of Shells provide a brief introduction to the foundations of shell theory, and to some of the important problems that can be tackled within the framework of shell theory. The book discusses topics on the Lamé problem and derivation of beam theory; the basic postulates, or assumptions of shell theory; membrane shells and the bending of circular cylinders; and axisymmetric vibrations of circular cylinders. Mathematicians and students of mathematics will find the book invaluable.

  • Carbon Dioxide Capture for Storage in Deep Geologic Formations - Results from the CO² Capture Project

    Vol 1 - Capture and Separation of Carbon Dioxide from Combustion
    • 1st Edition
    • David C Thomas + 1 more
    • English

  • Pathologic Physiology and Therapy of Diseases

    Volume 2
    • 1st Edition
    • Domingo M. Aviado
    • English

  • Metallic Matrix Composites

    Composite Materials, Vol. 4
    • 1st Edition
    • Kenneth G. Kreider
    • English
    Composite Materials, Volume 4: Metallic Matrix Components provides an in-depth report and a reference on the technology of metal-matrix composites. The book starts by giving an introduction to metal-matrix composites, and by discussing the principal metal-laminate fabrication methods, the properties of metal laminates, and materials engineering of laminated-metal composites for specific applications. The text also describes the technology in eutectic superalloys of nickel and cobalt; nickel alloys reinforced with alpha-Al2O3 filaments; and the problems and progress encountered in developing wire-reinforced superalloys. The fiber-reinforced titanium alloys; the development of metal-matrix composites reinforced with high-modulus graphite fibers; as well as the development, the physical and mechanical properties, and the engineering considerations for the use of boron-aluminum are also encompassed. Materials scientists and engineers will find the book invaluable.

  • KWIC Index of Rock Mechanics Literature

    • 1st Edition
    • J P Jenkins + 1 more
    • English
    KWIC Index of Rock Mechanics Literature, Part 2: 1969-1976 is an index of subjects in rock mechanics. The KWIC (keyword-in-context) index is produced by cyclic permutation of significant words in the title of the publication. The text covers materials in rock mechanics and geomechanics published around the 70s. The book will be of great use to students, researchers, and practitioners of geological sciences.

  • Precipitation Hardening

    The Commonwealth and International Library: Selected Readings in Metallurgy
    • 1st Edition
    • J. W. Martin
    • W. Hume-Rothery
    • English

  • Adaptive Processes in Economic Systems

    • 1st Edition
    • Roy E. Murphy
    • Richard Bellman
    • English
    Mathematics in Science and Engineering, Volume 20, Adaptive Processes in Economic Systems demonstrates the usefulness of communications theory, self-adaptive control theory, and thermodynamic theory to certain economic processes. This book discusses the common properties of adaptive processes, role of the decision maker, and mixed adaptive processes of the first and second kind. The economic environmental processes, concept of entropy time, and stochastic dynamic economic process are also elaborated. This text likewise covers the investment model with full liquidity, adaptive capital allocation process, and concept of an economic state space. Other topics include the stochastic equilibrium in the market and individual adaptive behavior. This volume is suitable for engineers, economists, and specialists of disciplines related to economic systems.

  • Topics in Optimization

    • 1st Edition
    • George Leitmann
    • English
    Mathematics in Science and Engineering, Volume 31: Topics in Optimization compiles contributions to the field of optimization of dynamical systems. This book is organized into two parts. Part 1 covers reported investigations that are based on variational techniques and constitute essentially extensions of the classical calculus of variations. The contributions to optimal control theory and its applications, where the arguments are primarily geometric in nature, are discussed in Part 2. This volume specifically discusses the inequalities in a variational problem, singular extremals, mathematical foundations of system optimization, and synthesis of optimal controls. This publication is recommended for both theoreticians and practitioners.

  • Interfaces in Polymer Matrix Composites

    Composite Materials, Vol. 6
    • 1st Edition
    • Edwin P. Plueddemann
    • English
    Composite Materials, Volume 6: Interfaces in Polymer Matrix Composites covers the interface region as deduced from extensive practical studies of composite properties and from scientific studies of surfaces and surface modifiers. The book starts by providing a historical background on the studies and theories of the interface. The text then discusses the mechanics of load transfer at the interface; the surface chemistry of moisture-induced composite failure; and radioisotope studies of coupling agents at the interface. The use of silane coupling agents in particulate mineral filled composites; the mechanism of adhesion through silane coupling agents; as well as the high-modulus fibers and the fiber-resin interface in resin composites are also considered. Materials scientists, materials engineers, and design engineers will find the book invaluable.

  • Stability of Motion

    • 1st Edition
    • A. M. Liapunov
    • Richard Bellman
    • English
    Mathematics in Science and Engineering, Volume 30: Stability of Motion deals with the problem of stability of motion. This volume investigates the problem of stability of the unperturbed motion in cases such as the system of differential equations for the perturbed motion is autonomie and the characteristic equation of the linear system that gives the first approximation has a double zero root. When the order of the system is larger than two (n > 2), all the remaining roots have negative real parts. The double root corresponds to a multiple elementary divisor of the characteristic matrix. This book is a good reference for mathematicians, students, and specialists conducting work on the stability of motion.

  • Mechanics of Composite Materials

    Composite Materials, Vol. 2
    • 1st Edition
    • G. P. Sendeckyj
    • English
    Composite Materials, Volume 2: Mechanics of Composite Materials deals with the prediction of the deformation behavior and strength of composite materials. The book discusses the basic concepts in micromechanics, definition of effective moduli, and the influence of the number of fibers through-the-thicknes... within a single composite layer on the effective properties. The text also describes the exact moduli of anisotropie laminates; the elastic behavior of composites; and the viscoelastic behavior and analysis of composite materials. The elastoplastic behavior of composites, and the application of statistical theories for the determination of thermal, electrical, and magnetic properties of heterogeneous materials are also considered. The book further tackles the finite deformations of ideal fiber-reinforced composites; wave propagation and vibrations in directionally reinforced composites; and the phenomenological anisotropie failure criterion. The text also looks into the photoelastic investigation of composites. Civil engineers, mechanical engineers, aerospace engineers, and people involved in the study of non-metallic materials will find the book invaluable.

  • Statistical Decision Theory in Adaptive Control Systems

    • 1st Edition
    • Yoshikazu Sawaragi + 2 more
    • Richard Bellman
    • English
    Mathematics in Science and Engineering, Volume 39: Statistical Decision Theory in Adaptive Control Systems focuses on the combination of control theory with statistical decision theory. This volume is divided into nine chapters. Chapter 1 reviews the history of control theory and introduces statistical decision theory. The mathematical description of random processes is covered in Chapter 2. In Chapter 3, the basic concept of statistical decision theory is treated, while in Chapter 4, the method of solving statistical decision problems is described. The application of statistical decision concepts to control problems is explained in Chapter 5. Chapter 6 elaborates a method of designing an adaptive control system. An application of the sequential decision procedure to the design of decision adaptive control systems is illustrated in Chapter 7. Chapter 8 is devoted to the description of a method of the adaptive adjustment of parameters contained in nonlinear control systems, followed by a discussion of the future problems in applications of statistical decision theory to control processes in the last chapter. This book is recommended for students and researchers concerned with statistical decision theory in adaptive control systems.

  • Optimization of Stochastic Systems

    Topics in Discrete-Time Systems
    • 1st Edition
    • Masanao Aoki
    • Richard Bellman
    • English

  • Electronic Circuits, Systems and Standards

    The Best of EDN
    • 1st Edition
    • Ian Hickman
    • English
    Electronic Circuits, Systems and Standards: The Best of EDN is a collection of 66 EDN articles. The topics covered in this collection are diverse but all are relevant to controlled circulation electronics. The coverage of the text includes topics about software and algorithms, such as simple random number algorithm; simple log algorithm; and efficient algorithm for repeated FFTs. The book also tackles measurement related topics, including test for identifying a Gaussian noise source; enhancing product reliability; and amplitude-locked loop speeds filter test. The text will be useful to students and practitioners of electronics related discipline, such as electronics engineering, computer engineering, and computer science. Computer and electronics hobbyists and enthusiasts will also benefit from the book.

  • Smart Buildings

    Advanced Materials and Nanotechnology to Improve Energy-Efficiency and Environmental Performance
    • 1st Edition
    • Marco Casini
    • English
    Smart Buildings: Advanced Materials and Nanotechnology to Improve Energy Efficiency and Environmental Performance presents a thorough analysis of the latest advancements in construction materials and building design that are applied to maximize building efficiency in both new and existing buildings. After a brief introduction on the issues concerning the design process in the third millennium, Part One examines the differences between Zero Energy, Green, and Smart Buildings, with particular emphasis placed on the issue of smart buildings and smart housing, mainly the ‘envelope’ and how to make it more adaptive with the new possibilities offered by nanotechnology and smart materials. Part Two focuses on the last generation of solutions for smart thermal insulation. Based on the results of extensive research into more innovative insulation materials, chapters discuss achievements in nanotechnology, bio-ecological, and phase-change materials. The technical characteristics, performance level, and methods of use for each are described in detail, as are the achievements in the field of green walls and their use as a solution for upgrading the energy efficiency and environmental performance of existing buildings. Finally, Part Three reviews current research on smart windows, with the assumption that transparent surfaces represent the most critical element in the energy balance of the building. Chapters provide an extensive review on the technical features of transparent closures that are currently on the market or under development, from so-called dynamic glazing to bio-adaptive and photovoltaic glazing. The aesthetic potential and performance limits are also be discussed.

  • Recent Trends in Cold-Formed Steel Construction

    • 1st Edition
    • Cheng Yu
    • English
    Recent Trends in Cold-Formed Steel Construction discusses advancements in an area that has become an important construction material for buildings. The book addresses cutting-edge new technologies and design methods using cold-formed steel as a main structural material, and provides technical guidance on how to design and build sustainable and energy-efficient cold-formed steel buildings. Part One of the book introduces the codes, specifications, and design methods for cold-formed steel structures, while Part Two provides computational analysis of cold-formed steel structures. Part Three examines the structural performance of cold-formed steel buildings and reviews the thermal performance, acoustic performance, fire protection, floor vibrations, and blast resistance of these buildings, with a final section reviewing innovation and sustainability in cold-formed steel construction.

  • Rethinking Bhopal

    A Definitive Guide to Investigating, Preventing, and Learning from Industrial Disasters
    • 1st Edition
    • Kenneth Bloch
    • English
    Rethinking Bhopal: A Definitive Guide to Investigating, Preventing, and Learning from Industrial Disasters is the go-to source for anyone seeking to learn how to improve process safety management (PSM) through applying fundamental asset reliability and incident investigation concepts. The seeds that unified PSM on a global scale were planted in Bhopal, India on December 3, 1984. Since then, considerable progress has been made to protect both workers and communities from catastrophic industrial failures. Industry acknowledges its responsibility to create value with accrued operating experience and that using information received from previous failures is a direct way to prevent future incidents. With this principle in mind, Bloch evaluates modern references related to the Bhopal Disaster, using recognized industrial asset reliability and incident investigation concepts. The practice of objective incident investigation offers a compelling insight into specific decisions and actions that resulted in history’s worst industrial disaster. Recording a fully transparent sequence of events promotes a personal sense of accountability for anyone involved in the manufacturing industry. Lessons learned can be immediately implemented by those with direct PSM, management, engineering, and operating responsibilities. Case histories demonstrate how patterns observed in the timeline leading up to the Bhopal Disaster can be detected in modern incidents and by recognizing these patterns in present-day processes avoids counterproductive operating decisions and unprecedented destruction. This text is instrumental in helping existing organizations re-evaluate their own exposures and risks, and would be a valuable read for any member of a process safety management team. Rethinking Bhopal: A Definitive Guide to Investigating, Preventing, and Learning from Industrial Disasters provides an expansion of knowledge and understanding for the novice in PSM while also providing depth and application considerations to challenge more experienced industry professionals. Note: All royalties from this book go to the Process Safety Heritage Trust Scholarship at Lamar University in Beaumont, Texas, USA.

  • Propagation of Transient Elastic Waves in Stratified Anisotropic Media

    • 1st Edition
    • Volume 32
    • J.H.M.T. van der Hijden
    • English
    Seismic waves are one of the standard diagnostic tools used to determine the mechanical parameters (volume density of mass, compressibility, elastic stiffness) in the interior of the earth and the geometry of subsurface structures. There is increasing evidence that in the interpretation of seismic data - especially shear-wave data - the influence of anisotropy must be taken into account.This volume presents a method to compute the seismic waves that are generated by an impulsive source in a stratified anisotropic medium. Although written with the seismic applications in mind, the method that is developed is not limited to solid-earth geophysics. In fact, the methods discussed in this monograph are applicable wherever waves propagate in stratified, anisotropic media. The standard approach to this problem is to employ Fourier transformations with respect to time and with respect to the horizontal spatial coordinates. To obtain numerical results, the relevant inverse transformations then have to be evaluated numerically. In this monograph the problem is, in contrast to the standard approach, solved by applying the Cagniard-de Hoop method and by representing the wave field as a sum of generalized rays. With this method, the computational results can be obtained relatively easily with any degree of accuracy, and with considerably less computation time. For completeness, analysis of acoustic waves in stratified isotropic media is included. Furthermore, for large horizontal or vertical source-receiver separations very efficient approximations are derived. Several examples and applications are given.

  • Theoretical Mechanics for Sixth Forms

    In Two Volumes
    • 2nd Edition
    • C. Plumpton + 1 more
    • English
    Theoretical Mechanics for Sixth Forms, Second Edition is a 14-chapter book that begins by elucidating the nature of theoretical mechanics. The book then describes the statics of a particle in illustration of the techniques of handling vector quantities. Subsequent chapters focus on the principle of moments, parallel forces and centers of gravity; and the application of Newton's second law to the dynamics of a particle and the ideas of work and energy, impulse and momentum, and power. The concept of friction is also explained. This volume concludes with chapters concerning motion in a circle and simple harmonic motion. This text will serve as a more complete course for pupils taking mathematics as a single or double subject.

  • New Tertiary Mathematics

    Further Applied Mathematics
    • 1st Edition
    • C. Plumpton + 1 more
    • English
    New Tertiary Mathematics, Volume 2, Part 2: Further Applied Mathematics deals with various topics of theoretical mechanics and probability, from statics and the dynamics of a rigid body to the dynamics of a particle with one and two degrees of freedom. Many examples of varying difficulty are worked in the text and exercises are added after each major topic is covered. This book is comprised of five chapters and opens with a discussion on statics, with particular reference to the analysis of systems of forces in three dimensions, along with virtual work, stability, and the catenary. Complicated equilibrium problems are considered. The reader is then introduced to the dynamics of a particle in one and two dimensions, as well as the implications of the Galilean transformation and the general theorems of motion for a system of particles. These theorems are applied to simple cases of the motion of a rigid body. The final chapter on probability examines normal and Poisson distributions, Markov chains, and miscellaneous problems. This monograph will be a useful resource for mathematical pupils and students engaged in private study.

  • Thermodynamic Approaches in Engineering Systems

    • 1st Edition
    • Stanislaw Sieniutycz
    • English
    Thermodynamic Approaches in Engineering Systems responds to the need for a synthesizing volume that throws light upon the extensive field of thermodynamics from a chemical engineering perspective that applies basic ideas and key results from the field to chemical engineering problems. This book outlines and interprets the most valuable achievements in applied non-equilibrium thermodynamics obtained within the recent fifty years. It synthesizes nontrivial achievements of thermodynamics in important branches of chemical and biochemical engineering. Readers will gain an update on what has been achieved, what new research problems could be stated, and what kind of further studies should be developed within specialized research.

  • Advances in Technical Nonwovens

    • 1st Edition
    • George Kellie
    • English
    Advances in Technical Nonwovens presents the latest information on the nonwovens industry, a dynamic and fast-growing industry with recent technological innovations that are leading to the development of novel end-use applications. The book reviews key developments in technical nonwoven manufacturing, specialist materials, and applications, with Part One covering important developments in materials and manufacturing technologies, including chapters devoted to fibers for technical nonwovens, the use of green recycled and biopolymer materials, and the application of nanofibres. The testing of nonwoven properties and the specialist area of composite nonwovens are also reviewed, with Part Two offering a detailed and wide-ranging overview of the many applications of technical nonwovens that includes chapters on automotive textiles, filtration, energy applications, geo- and agrotextiles, construction, furnishing, packaging and medical and hygiene products.

  • Calculations in Furnace Technology

    Division of Materials Science and Technology
    • 1st Edition
    • Clive Davies
    • H.M. Finniston + 2 more
    • English
    Calculations in Furnace Technology presents the theoretical and practical aspects of furnace technology. This book provides information pertinent to the development, application, and efficiency of furnace technology. Organized into eight chapters, this book begins with an overview of the exothermic reactions that occur when carbon, hydrogen, and sulfur are burned to release the energy available in the fuel. This text then evaluates the efficiencies to measure the quantity of fuel used, of flue gases leaving the plant, of air entering, and the heat lost to the surroundings. Other chapters consider that it is important to determine the amount of carbon discharged with the ashes, the quantity and composition of any tar produced, so that a carbon balance can be applied. The final chapter describes the various reactions within the furnace atmosphere and between charges and atmosphere. This book is a valuable resource for fuel technologists, heating and ventilating engineers, and plant operators.

  • Junction Transistors

    The Commonwealth and International Library: Applied Electricity and Electronics
    • 1st Edition
    • John. J. Sparkes
    • P. Hammond
    • English
    Junction Transistors explains the operation and characterization of junction transistors to a point from which detailed circuit analysis and design can be undertaken. This book highlights three features. First, this text analyzes the behavior of semiconductors, pn junctions, and all types of bipolar transistors from the standpoint of classical physics. The validity of this approach and the link with quantum physics is discussed in an appendix. Second, the high-speed operation of transistors is analyzed and explained in terms of base charge. Finally, the analysis of transistor behavior in terms of the movements of holes and electrons can only be carried out explicitly with the aid of simplifying assumptions, not all of which can be fully justified. In this selection, an attempt has been made to justify these assumptions wherever possible, to show where they break down, and to remove the assumptions altogether in one or two instances and obtain more rigorous solutions. This publication provides material of interest not only to undergraduates but also to those more familiar with the properties and use of transistors.

  • Weld Quality: The Role of Computers

    Proceedings of the International Conference on Improved Weldment Control with Special Reference to Computer Technology Held in Vienna, Austria, 4–5 July 1988 under the Auspices of the International Institute of Welding
    • 1st Edition
    • Sam Stuart
    • English
    Weld Quality: The Role of Computers documents the proceedings of the International Conference on Improved Weldment Control with Special Reference to Computer Technology, held in Vienna, Austria, 4-5 July 1988, under the auspices of the International Institute of Welding. The topics of the four sessions are: (I) Design, Calculation and Prediction Models For Metallurgical Processes/Conception... (II) Inspection and In-Service Monitoring; (III) Fabrication, Quality Assurance; and (IV) Expert Systems, Data Banks and Future Possibilities. Session I includes papers on the use of computer technology to establish the quality of the welded joints; computer-aided design system for design of fillet welds with optimum shape; and the use of numerical simulation software for predetermination and optimization of the mechanical resistance of brazed joints. The papers in Session II cover topics such as acoustic emission testing; eddy current inspection system for weld testing; and holographic imaging of weld cracks. Session III includes papers on a computer controlled friction welding system and a CAQ-system for welding workshops. The presentations in Session IV include an approach for writing conventional software and expert systems for welding engineers and an expert system for robotic welding.

  • Color Trends and Selection for Product Design

    Every Color Sells A Story
    • 1st Edition
    • Doreen Becker
    • English
    Color Trends and Selection for Product Design: Every Color Sells a Story speaks to the needs of the manufacturing level where colorants are developed, helping manufacturers to understand where their colors will sell and for what period of time these products will be viable. It covers issues such as stability, color measurement, and new methods of incorporation, which are critical in the development of new colorants. The book helps product designers more effectively reach their target audiences by helping them understand more about how colors are chosen for particular markets and how certain colors will perform in designs, including how to evaluate color under different lighting conditions and in, or on, different materials. Knowing how colors will perform in each material and how they will be seen on a store shelf or show room floor is vital. The book gives an important insight into future trends, including new design methods for creating color prototypes and regulatory requirements. The color designer needs to better understand the world of the color formulator, and the formulator conversely needs to understand the needs of the designer, so this book is written for both.

  • System Verification

    Proving the Design Solution Satisfies the Requirements
    • 2nd Edition
    • Jeffrey O. Grady
    • English
    System Verification: Proving the Design Solution Satisfies the Requirements, Second Edition explains how to determine what verification work must be done, how the total task can be broken down into verification tasks involving six straightforward methods, how to prepare a plan, procedure, and report for each of these tasks, and how to conduct an audit of the content of those reports for a particular product entity. This process-centered book is applicable to engineering and computing projects of all kinds, and the lifecycle approach helps all stakeholders in the design process understand how the verification and validation stage is significant to them. In addition to many flowcharts that illustrate the verification procedures involved, the book also includes 14 verification form templates for use in practice. The author draws on his experience of consulting for industry as well as lecturing to provide a uniquely practical and easy to use guide which is essential reading for systems and validation engineers, as well as everyone involved in the product design process.

  • Handbook for Transversely Finned Tube Heat Exchanger Design

    • 1st Edition
    • Eugene Pis’mennyi + 4 more
    • English
    Handbook for Transversely Finned Tubes Heat Exchangers Design contains detailed experimental data, correlations, and design methods for designing and improving the performance of finned tube heat exchangers. It covers the three main types, circular finned, square finned, and helical finned tube bundles. Based on extensive experimental studies and tested at leading design and research institutions, this handbook provides an extensive set of materials for calculating and designing convective surfaces from transversely finned tubes, with a particular emphasis on power plant applications.

  • Introduction to Bond Graphs and their Applications

    • 1st Edition
    • Jean U. Thoma
    • English
    Introduction to Bond Graphs and Their Applications is an introductory text on bond graphs and their applications in the field of engineering. The applications of bond graphs in mechanical engineering and design, fluid mechanics, electronic data processing, and thermal and thermodynamic systems are discussed. This book is comprised of eight chapters and begins by comparing the different kinds of graphs, diagrams, and models before turning to the fundamentals of bond graphs. The next chapter introduces the reader to the systematic application of bond graphs in mechanical engineering and design; fluid power engineering (sometimes called oil hydraulics); electrotechnique and electronics; and thermodynamics. The use of bond graphs in automatic computer programming with the ENPORT program is also described. The final chapter is devoted to inertia and resistance fields; linear two-ports in different causalities; thermodynamics of flow processes; electromechanical components; systems with distributed parameters; and force and velocity as effort or flow. This monograph is intended primarily for all engineers interested in representing simple or complex engineering systems and should also be of value to students in the different engineering disciplines, mechanics, fluid mechanics, and electronics with electromechanical power conversion or thermodynamics.

  • Science for Students of Leather Technology

    The Commonwealth and International Library: Technology Division a Modern Course in Leather Technology
    • 1st Edition
    • R. Reed
    • English
    Science for Students of Leather Technology is the first of a series of textbooks of leather science and technology designed to assist students at technical colleges and institutes as well as at universities. The book begins with an introduction to leather manufacturing. This is followed by separate chapters on the physical chemistry of solutions needed by students of leather manufacture; types of macromolecules; lipids and their use at various stages of leather manufacture; and the principles of their use as surface agents. Subsequent chapters deal with the general features of skin as an organ; how the skins from different animals may develop their special characteristics; common problems arising from insects and from micro-organisms in leather manufacture; and the structure and reactions of chromium complexes, which are the most widely used tanning agents; and modern views on the structure of the vegetable tannins and of the dyestuffs and pigments. This book is intended for students with a variety of backgrounds. Those whose chemical studies have not proceeded much beyond the elementary level will find considerable difficulty with some sections, especially where the organic chemistry of complex molecules (proteins, carbohydrates, dyes and vegetable tannins) is described. It is, however, possible to supplement the explanations given by reference to standard chemical textbooks, using the subject matter of the present volume as a guide to those sections which would repay further study.

  • Mineral Processing Design and Operations

    An Introduction
    • 2nd Edition
    • Ashok Gupta + 1 more
    • English
    Mineral Processing Design and Operations: An Introduction, Second Edition, helps further understanding of the various methods commonly used in mineral beneficiation and concentration processes. Application of theory to practice is explained at each stage, helping operators understand associated implications in each unit process. Covers the theory and formulae for unit capacities and power requirements to help the designer develop the necessary equipment and flow-sheets to economically attain maximum yield and grade. This second edition describes theories and practices of design and operation of apparatus and equipment, including an additional chapter on magnetic, electrostatic, and conductivity modes of mineral separation. Basics of process controls for efficient and economic modes of separation are introduced.

  • On-Road Intelligent Vehicles

    Motion Planning for Intelligent Transportation Systems
    • 1st Edition
    • Rahul Kala
    • English
    On-Road Intelligent Vehicles: Motion Planning for Intelligent Transportation Systems deals with the technology of autonomous vehicles, with a special focus on the navigation and planning aspects, presenting the information in three parts. Part One deals with the use of different sensors to perceive the environment, thereafter mapping the multi-domain senses to make a map of the operational scenario, including topics such as proximity sensors which give distances to obstacles, vision cameras, and computer vision techniques that may be used to pre-process the image, extract relevant features, and use classification techniques like neural networks and support vector machines for the identification of roads, lanes, vehicles, obstacles, traffic lights, signs, and pedestrians. With a detailed insight into the technology behind the vehicle, Part Two of the book focuses on the problem of motion planning. Numerous planning techniques are discussed and adapted to work for multi-vehicle traffic scenarios, including the use of sampling based approaches comprised of Genetic Algorithm and Rapidly-exploring Random Trees and Graph search based approaches, including a hierarchical decomposition of the algorithm and heuristic selection of nodes for limited exploration, Reactive Planning based approaches, including Fuzzy based planning, Potential Field based planning, and Elastic Strip and logic based planning. Part Three of the book covers the macroscopic concepts related to Intelligent Transportation Systems with a discussion of various topics and concepts related to transportation systems, including a description of traffic flow, the basic theory behind transportation systems, and generation of shock waves.

  • Smart Textiles and Their Applications

    • 1st Edition
    • Vladan Koncar
    • English
    Smart Textiles and Their Applications outlines the fundamental principles of applied smart textiles, also reporting on recent trends and research developments. Scientific issues and proposed solutions are presented in a rigorous and constructive way that fully presents the various results, prototypes, and case-studies obtained from academic and industrial laboratories worldwide. After an introduction to smart textiles and their applications from the editor, Part One reviews smart textiles for medical purposes, including their use in health monitoring, treatment delivery, and assistive technologies. Part Two covers smart textiles for transportation and energy, with chapters covering smart textiles for the monitoring of structures and processes, as well as smart textiles for energy generation. The final section considers smart textiles for protection, security, and communication, and includes chapters covering electrochromic textile displays, textile antennas, and smart materials for personal protective equipment.

  • Towards Global Action for Appropriate Technology

    • 1st Edition
    • A.S. Bhalla
    • English
    Towards Global Action for Appropriate Technology evaluates the feasibility of establishing and implementing an international mechanism for the promotion of appropriate technology. A strategy of reorienting research and development towards the rural and small-scale urban sectors is proposed, with emphasis on ultimately building national technological capacity in developing countries. This book is comprised of six chapters and begins with an overview of concepts, definitions, and strategies, followed by a discussion on some relatively unfamiliar criteria that should be taken into account in guiding the selection of appropriate technologies, including cost and risk involved. The following chapters focus on the links between the concepts of appropriate technology and the basic needs approach to development; institutional capacity at the national and international levels; and the activities of the United Nations with regard to appropriate technology. The final chapter presents a blueprint for global action for the promotion of appropriate technology, with particular reference to small-scale capital-saving technologies that are accessible to the poor and are essential for the creation of productive employment on a sufficient scale. This monograph will be of interest to social and economic policymakers.

  • Mathematics for Engineering, Technology and Computing Science

    The Commonwealth and International Library: Electrical Engineering Division
    • 1st Edition
    • Hedley G. Martin
    • N. Hiller
    • English
    Mathematics for Engineering, Technology and Computing Science is a text on mathematics for courses in engineering, technology, and computing science. It covers linear algebra, ordinary differential equations, and vector analysis, together with line and multiple integrals. This book consists of eight chapters and begins with a discussion on determinants and linear equations, with emphasis on how the value of a determinant is defined and how it may be obtained. Solution of linear equations and the dependence between linear equations are also considered. The next chapter introduces the reader to matrix algebra and linear equations; ordinary differential equations; ordinary linear differential equations of the second order; and solution in power series of differential equations. The Laplace transformation is also examined, along with line and multiple integrals. The last chapter is devoted to vector analysis and includes the basic ideas needed for an algebra of vectors as well as examples and problems of several applications. This monograph will be of interest to students of mathematics, computer science, and engineering courses.

  • Ion Implantation Into Metals

    Proceedings of the 3rd International Conference on Modification of Surface Properties of Metals by Ion Implantation, Held at UMIST, Manchester, UK, 23-26 June 1981
    • 1st Edition
    • V. Ashworth + 2 more
    • English
    Ion Implantation into Metals presents the proceedings of the 3rd International Conference on the Modification of Surface Properties of Metals by Ion Implantation, held at UMIST, Manchester, UK on June 23-26, 1981. The book includes papers on aqueous corrosion of ion-implanted iron; the mechanical properties and high temperature oxidation behavior in aqueous corrosion; and the potential of ion beam processing in this field of materials science and engineering. The text also presents papers on the important scientific progress in metal physics and related subjects.

  • Unbound Aggregates in Roads

    • 1st Edition
    • R.H. Jones + 1 more
    • English
    Unbound Aggregates in Roads contains the proceedings of the International Symposium on Unbound Aggregates in Roads (UNBAR3) held at the University of Nottingham, England, on April 11-13, 1989. The papers focus on unbound aggregates used in road construction and cover topics ranging from drainage and permeability to placement and compaction of unbound aggregates, design philosophy, specification, and compliance. This book consists of 49 chapters divided into eight sections and opens with an overview of the functions of unbound aggregates in roads, followed by a discussion on the mechanical properties of different aggregates and theoretical aspects of granular materials. The following chapters focus on granular drainage layers in pavement foundations; residual stresses caused by compaction in granular materials; and alternative materials for road construction such as steel slags and natural and waste materials. The use of unbound road aggregates in various countries such as Italy, France, Germany, and Portugal is also considered. This monograph will be a useful resource for designers, aggregate producers, contractors, specification writers, and materials engineers.

  • Microbial Engineering

    First International Symposium on Advances in Microbial Engineering
    • 1st Edition
    • Z. Sterbacek
    • English
    Microbial Engineering is a collection of invited lectures presented at the First International Symposium on Advances in Microbial Engineering held in Marianske Lazne, Czechoslovakia, from August 28 to September 1, 1972. Contributors explore significant developments in the field of microbial engineering and cover topics ranging from the role of microbial films in fermentation and fundamentals of fermenter design to aeration and agitation in antibiotic fermentations; kinetics of hydrolase production by microorganisms; and kinetics of product synthesis in continuous alcoholic fermentation. This book is comprised of nine chapters and begins by introducing the reader to the role of microbial films in fermentation, with emphasis on the mechanism of microbial adhesion as well as the important characteristics of the surfaces and the microorganisms. The next chapter examines the effects of environmental (macro) conditions and those on the cell level in relation to heat and mass transfer in microbial systems. The discussion then turns to the self-regulating mechanisms in bacterial cells; methods used to disintegrate cells to release unstable substances; and the influence of environmental factors on the kinetics of biosynthetic processes. A method for controlling aeration and agitation in the course of antibiotic fermentation is also described. The final chapter presents the results of experiments that investigated the continuous production of ethyl alcohol using starchy materials converted to hexoses by externally formed enzymes. This text will be of interest to microbiologists and biochemists as well as researchers in pure and applied chemistry.

  • An Introduction to Chemical Metallurgy

    International Series on Materials Science and Technology
    • 2nd Edition
    • R. H. Parker
    • D. W. Hopkins
    • English
    An Introduction to Chemical Metallurgy, Second Edition introduces the reader to chemical metallurgy, including its fundamental principles and some of their applications. References in the text to a date and the author of some law or principle of physical chemistry are given for the sake of historical significance. This book is comprised of eight chapters and opens with an overview of thermodynamics, with particular emphasis on the first law of thermodynamics; the expansion of a gas; thermodynamically reversible changes; applications of thermochemistry in metallurgy; and experimental techniques in calorimetry. The following chapters focus on entropy, free energy, and chemical equilibrium; solutions and reaction kinetics; extraction and refining of metals, including refining by preferential oxidation; and corrosion and electrodeposition. Electrochemistry and interfacial phenomena are also explored, along with surface energy and surface tension, electrolytes and electrolysis, and reduction and oxidation potentials. This monograph is written primarily for chemists and metallurgists as well as students embarking on courses in chemical metallurgy.

  • Advances in Machine Tool Design and Research 1967

    Proceedings of the 8th International M.T.D.R. Conference (Incorporating the 2nd International CIRP Production Engineering Research Conference), the University of Manchester Institute of Science and Technology, September 1967
    • 1st Edition
    • S. A. Tobias + 1 more
    • English
    Advances in Machine Tool Design and Research 1967, Part I covers the proceedings of the 8th International M.T.D.R. conference (incorporating the 2nd international CIRP production engineering research conference) held in the University of Manchester, Institute of Science and Technology on September 1967. The book covers the accuracy of automatically controlled machine tools; the influence of the rigidity of the machine-workpiece-to... system on the roughness of the machined surface; and the analysis of machine tool structure by computing techniques. The text also discusses sensors of tool life for optimization of machining; pre-set tooling and its application; and system 24, a new concept of manufacture. The design of hydrostatic journal bearings; the computer approach for storage of machinability data and calculation of machining costs and production rates; and a comparison of different measuring and indicating methods for the determination of pitch errors of large precision gears are also encompassed. The book further presents the calibration of tool/work thermocouples, as well as the effect of tool flank wear on the temperatures generated during metal cutting.

  • Advances in Materials

    Proceedings of a Symposium Organised by the North Western Branch of the Institution of Chemical Engineers Held at Manchester, 6–9 April, 1964
    • 1st Edition
    • Sam Stuart
    • English
    Advances in Materials surveys the developments in materials science and technology. This book examines the limitations imposed by materials on the development of technology. Organized into 34 chapters, this book begins with an overview of the techniques in solving the technical challenge in the field of materials. This text then defines the difficult environments considered in this investigation, which include mechanical stress, erosion, chemical attack, and thermal shock at temperatures above about 1200°C. Other chapters consider the successful development of nuclear thermionic converters, which centers heavily on the development of materials capable of enduring rather difficult working conditions for longer periods of time. This book discusses as well the techniques, such as the planar and epitaxy technique, employed in the production of devices. The final chapter deals with the rate of development in the equipment used in the fabrication of plastics. This book is a valuable resource for polymer scientists, materials scientists, engineers, and metallurgists.

  • Rock Fracture and Blasting

    Theory and Applications
    • 1st Edition
    • Zong-Xian Zhang
    • English
    Rock Fracture and Blasting: Theory and Applications provides the latest on stress waves, shock waves, and rock fracture, all necessary components that must be critically analyzed to maximize results in rock blasting. The positioning of charges and their capacity and sequencing are covered in this book, and must be carefully modeled to minimize impact in the surrounding environment. Through an explanation of these topics, author Professor Zhang’s experience in the field, and his theoretical knowledge, users will find a thorough guide that is not only up-to-date, but complete with a unique perspective on the field.

  • Lightweight Ballistic Composites

    Military and Law-Enforcement Applications
    • 2nd Edition
    • Ashok Bhatnagar
    • English
    Lightweight Ballistic Composites: Military and Law-Enforcement Applications, Second Edition, is a fully revised and updated version of this informative book that explores the many changes in composite materials technology that have occurred since the book's first release in 2008, especially the type of commercial products used by armed forces around the world. Some changes can be attributed to the wars in Iraq and Afghanistan, whereas others are due to massive investment by private companies to neutralize the ever-increasing global threats and fulfill the military's appetite for lighter materials. Soldiers are now better protected against new ballistic threats and the overall weight of body protection has been reduced, while comfort has increased. New military vehicles are no longer purely armored with steel, and are instead lined with lightweight ballistic materials that increase the distance military vehicles can travel without refueling and also improve maneuverability. The book considers all aspects of lightweight ballistic composites from fiber manufacturing to commercial products and testing. Chapters also cover the many uses of lightweight ballistic composites in the military and law-enforcement industries. It will be an invaluable reference for ballistic composite design engineers, product development engineers, and all those involved in promoting new products for both defense and the law-enforcement industry.

  • RFID and Wireless Sensors Using Ultra-Wideband Technology

    • 1st Edition
    • Angel Ramos + 3 more
    • English
    RFID and Wireless Sensors using Ultra-Wideband Technology explores how RFID-based technologies are becoming the first choice to realize the last (wireless) link in the chain between each element and the Internet due to their low cost and simplicity. Each day, more and more elements are being connected to the Internet of Things. In this book, ultra-wideband radio technology (in time domain) is exploited to realize this wireless link. Chipless, semi-passive and active RFID systems and wireless sensors and prototypes are proposed in terms of reader (setup and signal processing techniques) and tags (design, integration of sensors and performance). The authors include comprehensive theories, proposals of advanced techniques, and their implementation to help readers develop time-domain ultra-wideband radio technology for a variety of applications. This book is suitable for post-doctoral candidates, experienced researchers, and engineers developing RFID, tag antenna designs, chipless RFID, and sensor integration.

  • Information Systems for the Fashion and Apparel Industry

    • 1st Edition
    • Tsan-Ming Jason Choi
    • English
    Information Systems for the Fashion and Apparel Industry brings together trends and developments in fashion information systems, industrial case-studies, and insights from an international team of authors. The fashion and apparel industry is fast-growing and highly influential. Computerized information systems are essential to support fashion business operations and recent developments in social media, mobile commerce models, radio frequency identification (RFID) technologies, and ERP systems are all driving innovative business measures in the industry. After an introductory chapter outlining key decision points and information requirements in fast fashion supply chains, Part One focuses on the principles of fashion information systems, with chapters covering how decision making in the apparel supply chains can be improved through the use of fuzzy logic, RFID technologies, evolutionary optimization techniques, and artificial neural networks. Part Two then reviews the range of applications for information systems in the fashion and apparel industry to improve customer choice, aid design, implement intelligent forecasting and procurement systems, and manage inventory and returns.

  • The Stress Analysis of Pressure Vessels and Pressure Vessel Components

    International Series of Monographs in Mechanical Engineering
    • 1st Edition
    • S. S. Gill
    • English
    The Stress Analysis of Pressure Vessels and Pressure Vessel Components, Volume 3 deals with the basic principles and concepts underlying stress analysis of pressure vessels and related components used in the nuclear energy industry. Among the components subjected to stress analysis are pressure vessel branches, pressure vessel ends, local attachments, and flanges. Smooth and mitered pipe bends, externally pressurized vessels, and creep effects in structures are also analyzed. This book is comprised of 11 chapters that explore the main problems of structural analysis related to the design of metal pressure vessels and components. After introducing the reader to the basic principles of stress analysis, it turns to nozzles in pressure vessels. The shakedown analysis of radial nozzles in spheres is described for pressure, thrust, moment, shear, and combined loading. The problem of pressure vessel ends is treated next, along with local loads applied to pressure vessel shells at nozzles and local attachments such as support points. An analysis of pressure vessels using a computer is also presented. The final chapter describes the analysis of ligament stresses in pressure vessels and includes a discussion on arrays of holes with reinforcement. This volume will be of value to nuclear and structural engineers as well as designers and research workers in the nuclear industry.

  • SI Units in Engineering and Technology

    • 1st Edition
    • S.H. Qasim
    • English
    SI Units in Engineering and Technology focuses on the use of the International System of Units-Systeme International d'Unités (SI). The publication first elaborates on the SI, derivation of important engineering units, and derived SI units in science and engineering. Discussions focus on applied mechanics in mechanical engineering, electrical and magnetic units, stress and pressure, work and energy, power and force, and magnitude of SI units. The text then examines SI units conversion tables and engineering data in SI units. Tables include details on the sectional properties of metals in SI units, physical properties of important molded plastics, important physical constants expressed in SI units, and temperature, area, volume, and mass conversion. Tables that show the mathematical constants, standard values expressed in SI units, and Tex count conversion are also presented. The publication is a dependable source of data for researchers interested in the use of the International System of Units-Systeme International d'Unités.

  • Heat Pipes

    • 4th Edition
    • P. Dunn + 1 more
    • English
    It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject.This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5.Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection moulding, heat recovery and energy conservation, de-icing and manufacturing process temperature control, and chapter 7 discusses some of the latest uses, while retaining full data on those established for many years.Appendices have been updated, as appropriate.

  • Excavation, Support and Monitoring

    Volume 4
    • 1st Edition
    • J.A. Hudson
    • English
    Comprehensive Rock Engineering: Principles, Practice, & Projects, Volume 4: Excavation, Support, and Monitoring focuses on rock mechanics research and engineering, including excavation, drilling, blasting, and collapse mechanisms of boreholes. The selection first offers information on the construction process, mechanisms of rock fragmentation by blasting, and methods of improving blasting operations. Discussions focus on excavation, support, monitoring, stress wave mechanics, crater blasting, applications in construction and quarry blasting, fragmentation, damage, and environmental aspects. The text also ponders on the regulations, methods, and control techniques of blast monitoring and blast vibration monitoring for rock engineering. The publication takes a look at computer modeling and simulation of percussive drilling of rocks, mechanics of rock cutting, theoretical and practical rules for mechanical rock excavation, and use of water jets for rock excavation. Topics include drag pick cutting, excavating machines, adaptation of mechanical excavation to a harsh environment, abrasive water jets, and combined use of high pressure jets and mechanical cutting tools. The manuscript also examines design of support for underground excavations; development of tunnel support philosophy; and an overview of tunnel, underground excavation, and boreholes collapse mechanisms. The selection is a valuable reference for readers and rock engineering practitioners interested in pursuing research on rock engineering.

Related subjects