Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Fault Detection & Reliability

    Knowledge Based & Other Approaches
    • 1st Edition
    • M.G. Singh
    • English
    Provides an up-to-date review of the latest developments in system reliability maintenance, fault detection and fault-tolerant design techniques. Topics covered include reliability analysis and optimization, maintenance control policies, fault detection techniques, fault-tolerant systems, reliable controllers and robustness, knowledge based approaches and decision support systems. There are further applications papers on process control, robotics, manufacturing systems, communications and power systems. Contains 36 papers.

  • Direct Rolling and Hot Charging of Strand Cast Billets

    Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy
    • 1st Edition
    • J.J. Jonas
    • English
    This volume is a collection of papers presented at the International Symposium held in Montreal August 1988 as part of the 27th Annual Conference of Metallurgists, co-sponsored by the Canadian Steel Industry Research Association, the Canadian Continuous Steel Casting Research Group and the Canadian Institute of Mining and Metallurgy. Four topic areas are covered in the presentations: (1) casting practice and billet quality for direct rolling and hot charging; (2) temperature equalization methods and equipment; (3) surface quality and sensors and (4) mechanical handling of billets for direct rolling and charging.

  • The Chemistry of Silicon

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • E. G. Rochow
    • J. C. Bailar + 2 more
    • English
    Pergamon Texts in Organic Chemistry, Volume 9: The Chemistry of Silicon presents information essential in understanding the chemical properties of silicon. The book first covers the fundamental aspects of silicon, such as its nuclear, physical, and chemical properties. The text also details the history of silicon, its occurrence and distribution, and applications. Next, the selection enumerates the compounds and complexes of silicon, along with organosilicon compounds. The text will be of great interest to chemists and chemical engineers. Other researchers working on research study involving silicon will also benefit from the book.

  • The Engineering of Microprocessor Systems

    Guidelines on System Development
    • 1st Edition
    • Sam Stuart
    • English
    The Engineering of Microprocessor Systems: Guidelines on System Development provides economical and technical guidance for use when incorporating microprocessors in products or production processes and assesses the alternatives that are available. This volume is part of Project 0251 undertaken by The Electrical Research Association, which aims to give managers and development engineers advice and comment on the development process and the hardware and software needed to support the engineering of microprocessor systems. The results of Phase 1 of the five-phase project are contained in this first volume. It presents an overview of the technology of microprocessors themselves, of the development process, and of the range of development aids which will be covered in greater depth in later volumes. Also included are specific recommendations, facts, or guidelines on the choices to be made or procedures to be adopted. This volume is aimed primarily at the manager or other users responsible for microprocessor system developments, but who may lack direct experience in this field. It is intended to provide a decision framework and background material for management considering such developments for the first time, so that the special problems and key aspects of a microprocessor based development can be identified from the start.

  • Simplified Design of Switching Power Supplies

    • 1st Edition
    • John Lenk
    • English
    * Describes the operation of each circuit in detail * Examines a wide selection of external components that modify the IC package characteristics * Provides hands-on, essential information for designing a switching power supply Simplified Design of Switching Power Supplies is an all-inclusive, one-stop guide to switching power-supply design. Step-by-step instructions and diagrams render this book essential for the student and the experimenter, as well as the design professional. Simplified Design of Switching Power Supplies concentrates on the use of IC regulators. All popular forms of switching supplies, including DC-DC converters, inverters, buck, boost, buck-boost, pulse frequency modulation, pulse width modulation, current-mode control and pulse skipping, are described in detail. The design examples may be put to immediate use or may be modified to meet a specific design goal. As an instructional text for those unfamiliar with switching supplies, or as a reference for those in need of a refresher, this unique book is essential for those involved in switching power-supply design.

  • Introduction to Aircraft Structural Analysis

    • 2nd Edition
    • T.H.G. Megson
    • English
    Introduction to Aircraft Structural Analysis, Second Edition, is an essential resource for learning aircraft structural analysis. Based on the author's best-selling text Aircraft Structures for Engineering Students, this brief book covers the basics of structural analysis as applied to aircraft structures.Coverage of elasticity, energy methods, and virtual work sets the stage for discussions of airworthiness/airfra... loads and stress analysis of aircraft components. Numerous worked examples, illustrations, and sample problems show how to apply the concepts to realistic situations.This text is designed for undergraduate and postgraduate students of aerospace and aeronautical engineering as well as for professional development and training courses.

  • Numerical Methods for Problems in Infinite Domains

    • 1st Edition
    • Volume 33
    • D. Givoli
    • English
    This volume reviews and discusses the main numerical methods used today for solving problems in infinite domains. It also presents in detail one very effective method in this class, namely the Dirichlet-to-Neumann (DtN) finite element method. The book is intended to provide the researcher or engineer with the state-of-the-art in numerical solution methods for infinite domain problems, such as the problems encountered in acoustics and structural acoustics, fluid dynamics, meteorology, and many other fields of application. The emphasis is on the fundamentals of the various methods, and on reporting recent progress and forecasting future directions. An appendix at the end of the book provides an introduction to the essentials of the finite element method, and suggests a short list of texts on the subject which are categorized by their level of mathematics.

  • Engineering Aspects of Shape Memory Alloys

    • 1st Edition
    • T W Duerig + 2 more
    • English
    Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

  • A Course of Mathematics for Engineerings and Scientists

    Volume 4
    • 1st Edition
    • Brian H. Chirgwin + 1 more
    • English
    A Course of Mathematics for Engineers and Scientists offers a mathematics course for undergraduate students reading science and engineering at British and Commonwealth Universities and colleges. The aim of this volume is to generalize and develop the ideas and methods of earlier volumes so that the student can appreciate and use the mathematical methods required in the more advanced parts of physics and engineering. This book begins with elementary ideas of vector algebra which are generalized and developed in two ways. The first is an account of vector analysis and the differential and integral operations and theorems concerning vectors. These ideas find their first generalization in tensor analysis and the transformation of coordinates, including orthogonal curvilinear coordinates. The second development is to matrices, where the properties of arrays of elements, linear equations, and quadratic forms are shown to be the generalizations of elementary algebra and, using 'vector space', of familiar geometrical ideas to n dimensions. The solution of differential equations by series provides a general method for the solution of ordinary and some partial differential equations. A discussion of the properties of the solutions in the light of the Sturm-Liouville theory introduces the conceptions of eigenvalues and orthogonal functions, forming a link with matrices. A chapter on the special functions gives some of the better known properties of Bessel, Legendre, Laguerre, and Hermite functions, which commonly occur in the solution of boundary and initial value problems.

  • Advances in Fracture Research

    Proceedings of the 5th International Conference on Fracture (ICF5), Cannes, France, 29 March - 3 April 1981
    • 1st Edition
    • D. Francois
    • English
    Advances in Fracture Research, Volume 6, documents the proceedings of the 5th International Conference on Fracture (ICF5) held in Cannes, France, 29 March-3 April 1981. The conference was attended by 670 participants from 26 countries. The program consisted of plenary sessions with invited speakers, technical sessions with contributed papers, a poster session, and two round table discussions. This volume contains 14 papers that deal with topics such as advancements in fracture mechanics; the application of fracture mechanics in three areas: damage tolerance requirements for aircraft structures, toughness requirements for bridges and heat up and cool down schedule, and evaluation of in service NDE indications for nuclear pressure vessels; and the analysis of crack-tip stress and strain fields for stationary and growing cracks in inelastic solids under monotonic loading. Also included are papers on the impact of environment on fracture; the problem of fracture of large concrete structures; and microcracking in hydrogenated austenitic steels.

  • Logistical Excellence

    It's Not Business As Usual
    • 1st Edition
    • Donald J. Bowersox
    • English
    Benefit from the practices of the best logistics managersOne of the nation's top authorities on logistics management presents a focused interpretation of research findings to help managers improve logistical competency within their organizations. Zeroing in on the best practices of successful logistic managers - and well supported by statistical evidence this handbook provides a sequential model as well as extensive coverage of Electronic Data Interchange in the logistics process. You'll find out why logistics must play an increasingly critical role in overall corporate strategy in the coming years, and why its managers must learn to better manage change. Special emphasis is placed on the development of strategic alliances to increase corporate speed and quality. Throughout the eight chapters, an action-oriented case dialogue facilitates interest and ease of reading.

  • Materials Data for Cyclic Loading

    Aluminium and Titanium Alloys
    • 1st Edition
    • Chr. Boller + 1 more
    • C. Laird
    • English
    Materials Data for Cyclic Loading, Part D: Aluminium and Titanium Alloys presents materials data for cyclic loading which provide the basis for materials assessment by direct comparison of data or characteristic values and for estimating the crack initiation lives of aluminum and titanium alloys under constant and variable amplitude loading. The data include stress-strain curves, strain life curves, and mean stress parameter life curves for cyclic loading. Each data sheet takes up a maximum of four pages. The first page gives a description of the material and testing procedure. The chemical composition is always given in weight percent and corresponds to the values given in the literature referred to. The second and third pages show the diagrams for: stress-strain curves for monotonic and cyclic loading; strain life curve;, and mean stress (damage) parameter life curve according to the parameter of Smith, Watson and Topper. Unless indicated otherwise in the plots, the experiments were carried out at room temperature in laboratory air. The diagrams for the stress-strain relationships contain at the most three curves, one for monotonic loading and two for cyclic loading, the latter being evaluated from incremental step tests and constant amplitude tests. All three curves can be described approximately by an analytical function. This book will be of interest to materials scientists.

  • Electrical Properties of Polymers

    • 1st Edition
    • Donald A. Seanor
    • English
    Electrical Properties of Polymers covers topics on the electrical properties of polymers. The book discusses the electrical conduction in polymers; the structure and charge generation in low-dimensions; and the photophysical processes, energy transfer, and photoconduction in polymers. The text also describes the photovoltaic phenomena in organic solids; thermally stimulated discharge current analysis of polymers; and the polymeric electrets. The contact electrification of polymers and its elimination; and the dielectric breakdown phenomena in polymers are also considered. Materials scientists and chemists will find the book invaluable.

  • Decomposition of Alloys: The Early Stages

    Proceedings of the 2nd Acta-Scripta Metallurgica Conference
    • 1st Edition
    • P. Haasen + 2 more
    • English
    Decomposition of Alloys: The Early Stages contains the proceedings of the 2nd Acta-Scripta Metallurgica Conference held in Sonnenberg, Germany, on September 19-23, 1983. Contributors discuss the early stages of decomposition in alloys, placing emphasis on the unsolved problems of the field, rather than on the solved ones. This book has 36 chapters and opens with a discussion on developments in the theory of the kinetics of first-order phase transitions, followed by an analysis of metastability and spinodal nucleation; neutron scattering during decomposition of aluminum alloys; Ostwald ripening of precipitates; and phase stability under irradiation. The next chapters explore decomposition processes in Al-Zn alloys; thermal decomposition in Cu-Ni-Fe alloys; and the initial stages of discontinuous precipitation reactions. Other papers focus on the mechanisms of plate precipitate growth; spinodal decomposition and continuous ordering; and early stages of decomposition in Ni-Al single crystals. This monograph will be of interest to students and practitioners of physics and metallurgy.

  • The Physical Basis of Electronics

    An Introductory Course
    • 2nd Edition
    • D. J. Harris + 1 more
    • P. Hammond
    • English
    The Physical Basis of Electronics: An Introductory Course, Second Edition is an 11-chapter text that discusses the physical concepts of electronic devices. This edition deals with the considerable advances in electronic techniques, from the introduction of field effect transistors to the development of integrated circuits. The opening chapters discuss the fundamentals of vacuum electronics and solid-state electronics. The subsequent chapters deal with the other components of electronic devices and their functions, including semiconductor diode and transistor as an amplifier and a switch. The discussion then shifts to several types of field-effect transistor and the production of p-n junctions, transistors, and integrated circuits. A chapter highlights the four classifications of thermionic valves commonly used in electronic devices, namely, diodes, triodes, tetrodes, and pentodes. This chapter also considers the effect of small gas introduced to the characteristics of these valves. The concluding chapters discuss some of the basic modes of operation of electronic circuits and cathode-ray tube. This edition is of great value to undergraduate electronics students.

  • Glass IV

    Treatise on Materials Science and Technology, Vol. 26
    • 1st Edition
    • Minoru Tomozawa + 1 more
    • English
    Treatise on Materials Science and Technology, Volume 28: Glass IV covers the developments in glass science and technology. The book discusses the use of silicon dioxide films in semiconductor devices; the nuclear waste glasses; and the synthesis and properties of oxynitride glasses. The text also describes the preparation, the properties, and the applications of heavy-metal fluoride glasses; and an analytical model of viscoelasticity in seals. Materials scientists and materials engineers will find the book invaluable.

  • Stability of Structures by Finite Element Methods

    • 1st Edition
    • Volume 40
    • Z. Waszczyszyn + 2 more
    • English
    This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.

  • Space and Humanity

    Selected Proceedings of the 39th International Astronautical Federation Congress, Bangalore, India, 8-15 October 1988
    • 1st Edition
    • L. G. Napolitano
    • English
    This volume contains a selection of 27 papers that are chiefly survey, state-of-the-art, review or programmatic in nature. The volume itself is structured in three parts: Part I, The System, that deals with Space Transportation, Space Stations and Platforms; Part II, Hard and Soft Technologies, that deals with Technology Applications, Astrodynamics, Space Power and Propulsion; Part III, The Utilization, that addresses the two main lines Space Exploration and Applications, including Earth Observation, Telecommunication and Space Education, Microgravity, Safety and Rescue.

  • Optimization in Mechanics

    Problems and Methods
    • 1st Edition
    • Volume 34
    • P. Brousse
    • J. D. Achenbach
    • English
    Optimization in Mechanics: Problems and Methods investigates various problems and methods of optimization in mechanics. The subjects under study range from minimization of masses and stresses or displacements, to maximization of loads, vibration frequencies, and critical speeds of rotating shafts. Comprised of seven chapters, this book begins by presenting examples of optimization problems in mechanics and considering their application, as well as illustrating the usefulness of some optimizations like those of a reinforced shell, a robot, and a booster. The next chapter outlines some of the mathematical concepts that form the framework for optimization methods and techniques and demonstrates their efficiency in yielding relevant results. Subsequent chapters focus on the Kuhn Tucker theorem and duality, with proofs; associated problems and classical numerical methods of mathematical programming, including gradient and conjugate gradient methods; and techniques for dealing with large-scale problems. The book concludes by describing optimizations of discrete or continuous structures subject to dynamical effects. Mass minimization and fundamental eigenvalue problems as well as problems of minimization of some dynamical responses are studied. This monograph is written for students, engineers, scientists, and even self-taught individuals.

  • Advances in Research on the Strength and Fracture of Materials

    An Overview
    • 1st Edition
    • D.M.R. Taplin
    • English
    Advances in Research on the Strength and Fracture of Materials: Volume 1s—An Overview contains the proceedings of the Fourth International Conference on Fracture held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to fracture in a wide range of materials such as metals and alloys, polymers, ceramics, and composites. This volume is comprised of 40 chapters and opens with a discussion on progress in the development of elementary fracture mechanism maps and their application to metal deformation processes, along with micro-mechanisms of fracture and the fracture toughness of engineering alloys. The next section is devoted to the fracture of large-scale structures such as steel structures, aircraft, cargo containment systems, nuclear reactors, and pressure vessels. Fracture at high temperatures and in sensitive environments is then explored, paying particular attention to creep failure by cavitation under non-steady conditions; the effects of hydrogen and impurities on brittle fracture in steel; and mechanism of embrittlement and brittle fracture in liquid metal environments. The remaining chapters consider the fracture of non-metallic materials as well as developments and concepts in the application of fracture mechanics. This book will be of interest to metallurgists, materials scientists, and structural and mechanical engineers.

  • Joining of Advanced Materials

    • 1st Edition
    • Messler + 1 more
    • English
    Provides an unusually complete and readable compilation of the primary and secondary options for joining conventional materials in non-conventional ways. Provides unique coverage of adhesive bonding using both organic and inorganic adhesives, cements and mortars. Focuses on materials issues without ignoring issues related to joint design, production processing, quality assurance, process economics, and joining performance in service.Joining of advanced materials is a unique treatment of joining of both conventional and advanced metals andalloys, intermetallics, ceramics, glasses, polymers, and composites with polymeric, metallic, ceramic, intermetallic and carbon matrices in similar and dissimilar combinations. Suitable for undergraduate and graduate students in engineering in addition to practicing engineers, this book treats in detail mechanical joining with conventional and advanced fasteners or integral design features, adhesive bonding, fusion and non-fusion welding, brazing, soldering, thermal spraying, and synergistic combinations of weld-bonding, weld-brazing, rivet-bonding. In addition, the book addresses materials issues, joint design, production processing, quality assurance, process economics, and joint performance in service.

  • Advances in Fracture Research

    Proceedings of the 7th International Conference on Fracture (ICF7), Houston, Texas, 20-24 March 1989
    • 1st Edition
    • K. Salama + 3 more
    • English
    Held every four years, the International Congress on Fracture is the premier international forum for the exchange of ideas between scientists and engineers involved in producing and using materials resistant to fracture and fatigue. This major six-volume work which forms the proceedings of the Seventh International Congress on Fracture therefore provides the most comprehensive account available of the current status of research into fracture and fatigue, and the application of this knowledge to the design, fabrication and operation of materials and structures. As such, it will be an essential reference for materials scientists and mechanical, structural, aeronautical and design engineers with an interest in fracture and its prevention.

  • Distributed Parameter Control Systems

    Theory and Application
    • 1st Edition
    • Spyros G. Tzafestas
    • English
    Distributed Parameter Control Systems: Theory and Application is a two-part book consisting of 10 theoretical and five application-oriented chapters contributed by well-known workers in the distributed-paramete... systems. The book covers topics of distributed parameter control systems in the areas of simulation, identification, state estimation, stability, control (optimal, stochastic, and coordinated), numerical approximation methods, optimal sensor, and actuator positioning. Five applications works include chemical reactors, heat exchangers, petroleum reservoirs/aquifers, and nuclear reactors. The text will be a useful reference for both graduate students and professional researchers working in the field.

  • Mass Transfer and Absorbers

    International Series of Monographs in Chemical Engineering
    • 1st Edition
    • T. Hobler
    • P. V. Danckwerts
    • English
    Mass Transfer and Absorbers deals with absorption and mass transfer processes and the factors to consider in designing absorbers. Calculations are supported by a uniform, generalized process driving force, complying with Maxwell's equation, and the coefficients are made as independent as possible in terms of the kind of diffusion and of the values of the concentrations. This volume is comprised of seven chapters and begins with an overview of the general principles of diffusional mass transfer, absorption and stripping, and equilibrium between gas and liquid phases. Steady-state mass transfer by diffusion is then discussed, along with mass transfer in a single phase (forced flow and unforced flow). Subsequent chapters explore design considerations for mass transfer equipment and related problems; adsorption accompanied by a chemical reaction; and problems relating to hydrodynamics. The final chapter is devoted to some practical issues, including economic flow velocity and mechanical features of packed, plate, and spray tower designs. This book is intended for practicing designers and engineers.

  • Granular Filtration of Aerosols and Hydrosols

    Butterworths Series in Chemical Engineering
    • 1st Edition
    • Chi Tien
    • Howard Brenner
    • English
    Granular Filtration of Aerosols and Hydrosols is concerned with the fundamental aspects of granular filtration of both liquid and gas suspensions. This book takes a unifying approach to the treatment of granular aerosol and hydrosol filtration. The text begins with the introduction of the process of granular filtration and its various applications. Subsequent chapters discuss the aspects of filtration, such as, the macroscopic description of fixed-bed granular filtration; the methods for making representations based on various porous media models for both clean and clogged filter media; the mechanisms of particle deposition; and the trajectory analysis of particle deposition. The final chapter presents and discusses case studies which deal with predicting and calculating the dynamic behavior of granular filtration of hydrosols and aerosols. Researchers in granular filtration and graduate students dealing with separation technology will find the book highly useful.

  • Automation and Robotisation in Welding and Allied Processes

    Proceedings of the International Conference Held at Strasbourg, France, 2-3 September 1985, under the Auspices of the International Institute of Welding
    • 1st Edition
    • P D Boyd + 1 more
    • English
    Automation and Robotisation in Welding and Allied Processes contains the proceedings of the International Conference on Automation and Robotization in Welding and Allied Processes held in Strasbourg, France, on September 2-3, 1985, under the auspices of the International Institute of Welding. The papers explore developments in the mechanization, automation, and utilization of robots in welding and related processes and cover topics such as half and fully mechanized welding of offshore constructions; adaptive systems of process control for spot welding robotic cells; and application of computer integrated manufacture to welder fabrication. This book is divided into two sections and begins with an overview of technical, economic, and human factors relating to mechanization and automation in arc and resistance welding. The next chapter describes a closed-loop controlled arc welding power source using a microcomputer as controller. The discussion then turns to problems associated with half and fully mechanized welding of offshore constructions; flexible manufacturing systems comprising welding with high productivity in small lot production; and the main factors causing process disturbance in spot welding. The final chapter is devoted to advanced adaptive control of automated arc welded fabrication which involves sensor application for seam tracking and joint recognition, preprogramming and online supervision of process parameters, and the design of a closed adaptive control loop. This monograph will be of interest to mechanical, electronics, industrial, and robotics engineers.

  • Software Engineer's Pocket Book

    • 1st Edition
    • Michael Tooley
    • English
    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and quality assurance of software.

  • Properties of Ceramic Raw Materials

    • 2nd Edition
    • W. Ryan
    • English
    Properties of Ceramic Raw Materials, 2nd Edition in SI/Metric Units is a five-chapter book that first discusses the manufacturing processes for ceramic products. This book then elucidates the properties important during ceramic-making. The last two chapters explore the reactions occurring on firing and the ceramic raw materials.

  • The Reinforced Plastics Handbook

    • 1st Edition
    • J. Murphy
    • English
    The Handbook of Reinforced Plastics is a complete and practical manual for specifying and selecting reinforced plastic products and services. The handbook covers all materials and classes of equipment currently available, with over 550 pages of editorial, illustrations and tables.

  • Basic Matrix Algebra and Transistor Circuits

    • 1st Edition
    • G. Zelinger
    • English
    Basic Matrix Algebra and Transistor Circuits deals with mastering the techniques of matrix algebra for application in transistors. This book attempts to unify fundamental subjects, such as matrix algebra, four-terminal network theory, transistor equivalent circuits, and pertinent design matters. Part I of this book focuses on basic matrix algebra of four-terminal networks, with descriptions of the different systems of matrices. This part also discusses both simple and complex network configurations and their associated transmission. This discussion is followed by the alternative methods of deriving the transmission matrix using Kirchhoff's law. Part II introduces matrix analysis of transistor circuits, and then shows in detail the three transistor configurations: common-base, common-emitter, and common collector. A step-by-step method of transmission matrices derivation for each transistor configuration is then explained. This book notes the significance of matrix algebra in dealing with amplifier problems in a variety of output network configurations. Part III focuses on several aspects of single-stage transistor ampler design. This part explains how matrix algebra can be used to derive the exact input, output impedances, and the reverse transfer properties of transistor amplifiers with full load and generator terminations. Through mathematical analysis, the book shows the accuracy of matrix analysis in transistor amplifier design. This book is suitable for design engineers, electrical engineers, and students and practitioners of applied mathematics.

  • Chemical Metallurgy

    • 2nd Edition
    • J.J. Moore
    • English
    Chemical Metallurgy, Second Edition provides the fundamental chemical principles and demonstrates the application of these principles to process metallurgy, materials synthesis and processing, and corrosion protection. The book consists of nine chapters. The first five chapters emphasize the fundamental chemical principles involved in metallurgical reactions. An additional chapter on slag chemistry has also been added in this second edition in order to provide a more thorough understanding of slag-metal reactions. The final three chapters focus on the applications of the chemical principles to the extraction and refining of metals, metal melting and recycling, and metallic corrosion. The book will be of value to materials students and teachers and scientists and engineers entering employment in the metallurgical and materials processing and metal finishing industries.

  • Anglo–American Microelectronics Data 1968–69

    Manufacturers R–Z
    • 1st Edition
    • G.W.A. Dummer + 1 more
    • English
    Anglo-American Microelectronics Data 1968-69, Volume Two: Manufacturers R-Z presents information on the features of the design, construction and application of microelectronic devices. The book discusses the features of the design, construction and application of radiation integrated circuits; Raytheon integrated circuits; RCA integrated circuits; and Signetics integrated circuits. The text also describes the features of the design, construction and application of Siliconix integrated circuits; Sperry integrated circuits; Sprague integrated circuits; and STC thick film circuits. The features of the design, construction and application of Stewart-Warner micro circuits; Sylvania integrated circuits; Texas instruments semiconductor networks; and transitron integrated circuits are also encompassed. The book further tackles the features of the design, construction and application of Varo hybrid film integrated circuits; Welwyn thick film and thin film resistor networks; Westinghouse integrated circuits; and Zeltex hybrid integrated circuits. Designers, buyers, and users of microelectronic devices will find the book useful.

  • Embrittlement of Engineering Alloys

    • 1st Edition
    • C. L. Briant
    • English
    Treatise on Materials Science and Technology, Volume 25: Embrittlement of Engineering Alloys is an 11-chapter text that describes some situations that produce premature failure of several engineering alloys, including steels and nickel- and aluminum-base alloys. Chapters 1 to 3 consider situations where improper alloy composition, processing, and/or heat treatment can lead to a degradation of mechanical properties, even in the absence of an aggressive environment or an elevated temperature. Chapters 4 and 5 examine the effect of elevated temperatures on the mechanical properties of both ferrous and nonferrous alloys. Chapters 6 and 7 discuss the effects of corrosive environments on both stressed and unstressed materials. In these environments anodic dissolution is the primary step that leads to failure. Chapters 8 to 10 deal with the effects of aggressive environments that lead to enhanced decohesion or embrittlement of the metal, such as hydrogen, liquid metal, and irradiation-induced embrittlement. Chapter 11 looks into the embrittlement phenomena occurring during welding, one of the most common processing conditions to which a material could be subjected. This book will prove useful to materials scientists and researchers.

  • Nonlinear Optics

    • 1st Edition
    • Robert W. Boyd
    • English
    Nonlinear Optics is an advanced textbook for courses dealing with nonlinear optics, quantum electronics, laser physics, contemporary and quantum optics, and electrooptics. Its pedagogical emphasis is on fundamentals rather than particular, transitory applications. As a result, this textbook will have lasting appeal to a wide audience of electrical engineering, physics, and optics students, as well as those in related fields such as materials science and chemistry.

  • Engineering Geology and Geotechnics

    • 1st Edition
    • F. G. Bell
    • English
    Engineering Geology and Geotechnics discusses engineering survey methods. The book is comprised of 12 chapters that cover several concerns in engineering, such as building foundations, slopes, and construction materials. Chapter 1 covers site investigation, while Chapter 2 tackles geophysical exploration. Chapter 3 deals with slope and open excavation, while Chapter 4 discusses subsurface excavation. Foundation for buildings, reservoir, and dams and dam sites are also covered in the book. A chapter then tackles hydrogeology and underground water supply. The text also encompasses river and beach engineering. The last two chapters cover engineering seismology and construction materials. This book will be of great use to researchers, practitioners, and students of engineering.

  • Geosynthetics in Filtration, Drainage and Erosion Control

    • 1st Edition
    • R.M. Koerner
    • English
    Geosynthetics can, and have, played a pivotal role in providing the primary functions of filtration, drainage and erosion control. Within each category this book counterpoints the design, testing and performance of the various materials against one another. The facilitation of filtration by a number of different woven and non–woven geotextiles is discussed. Design is centred around a balance between open voids [for adequate permeability] and closed voids [for proper soil retention]. This balance is compromised by long term clogging or soil loss from either the upstream soil particles or by the nature of the permeating fluid. This is a major focal area of the book.One solution to excessive filter clogging is to open up the geotextile's voids and allow sediments and micro–organisms in the permeating fluid to pass through. The challenge then becomes the design and potential clogging of the drain. The drainage aspect of geosynthetics is the second focal area.Erosion control is closely related to both filtration and drainage. The tremendous design problems, and equally large repair problems on all types of facilities, are addressed. Highway slopes, earth dams, landfill covers and solid waste daily covers are a few common situations.

  • Boiling Heat Transfer

    Modern Developments and Advances
    • 1st Edition
    • R.T. Lahey Jr.
    • English
    This volume covers the modern developments in boiling heat transfer and two-phase flow, and is intended to provide industrial, government and academic researchers with state-of-the-art research findings in the area of multiphase flow and heat transfer technology. Special attention is given to technology transfer, indicating how recent significant results may be used for practical applications.The chapters give detailed technical material that will be useful to engineers and scientists who work in the field of multiphase flow and heat transfer. The authors of all chapters are members of the CMR at Rensselaer, a research centre specializing in the state-of-the-art in multiphase science.

  • Characterization of Composite Materials

    • 1st Edition
    • Hatsuo Ishida
    • English
    Now, in one book, there is coverage of modern surface analytical techniques applied specifically to composite materials. Centering around spectroscopic characterization of composites and polymer-matrix composities, Characterization of CompositeMaterials covers techniques with a demonstrated use for composite stuides along with promising new techniques such as STM/AFM and special Raman spectroscopy. Each chapter will cover a specific technique and will provide basic background information, theories of the technique, and application examples, including futuristic state-of-the-art applications. Detailed information about the individual characterization techniques mentioned can be found in the Encyclopaedia of Materials Cahracterization, the companion volume in the Materials Characterization Series: surfaces, interfaces, thin films.

  • Connector Industry

    A Profile of the European Connector Industry - Market Prospects to 1999
    • 6th Edition
    • Andrew Fletcher
    • English
    New sixth edition of the market report - a complete analysis of industry status and condition, pinpointing market trends and opportunities, highlighting emerging technologies, tracking industry developments. Market figures and forecasts are provided for the period 1994-1999 by product and region and a survey of the major connector suppliers in Europe includes a league table and profiles of the top 20 market leaders in Europe. Products covered include: circular, rectangular, PCB, IDC, coaxial and fibre optic connectors. Country coverage: Germany, UK, France, Italy, Benelux, Scandinavia, Rest of Europe.Profile of the European Connector Industry is one of a series of studies conducted by Elsevier Advanced Technology's market research unit as part of its ongoing research in the electronics industry. All profile reports are the result of a programme of personal interviews with the key manufacturers, suppliers and other industry experts, supplemented by telephone interviews, questionnaires, literature searches and desk research of trade and industry statistics.

  • Manufacturing Cells

    Control, Programming and Integration
    • 1st Edition
    • David J Williams + 1 more
    • English
    Manufacturing Cells: Control, Programming and Integration presents the issues surrounding the integration of manufacturing cells and small manufacturing systems. This book provides a variety of topics, including generally applicable cell controllers, cell management, and cell control. Organized into eight chapters, this book begins with an overview of the methods that allow the effective and fast integration of manufacturing devices into automated manufacturing cells. This text then describes the cell controller as being one element of a computer-integrated management system. Other chapters consider the innovative approach to the design, implementation, and integration of cell controllers in a manufacturing system. This book discusses as well the cell management language, which is a powerful computing environment for building complex manufacturing systems. The final chapter deals with the methods for describing the real-time, decision-making logic that is needed to control manufacturing cells. This book is a valuable resource for manufacturing engineers, managers, and supervisors.

  • Treatise on Materials Science and Technology

    Materials Science Series, Vol. 1
    • 1st Edition
    • Herbert Herman
    • English
    Treatise on Materials Science and Technology, Volume 1 covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book discusses the energy, kinetics, and topography of interfaces; the fracture of a wide range of composites; and the theory of the propagation of elastic waves through composites. The text also describes the complex nature of substitutional-inter... interactions in bcc alloys; the dynamics of quantitative metallography; and the science and technology of chemical vapor deposition. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Marine, Steam Engines, and Turbines

    • 4th Edition
    • S. C. McBirnie
    • English
    Marine Engineering Series: Marine Steam Turbines and Engines, Fourth Edition deals with the principles behind how turbines and engines function, how they progressed over the years, and how they operate. The book covers related topics such as the generation and properties of steam; the different parts and examples of turbines; turbine reduction gears; and the balance and speed of turbine rotors. The selection also covers special turbines and engines; the cycles and efficiencies of steam turbines and engines; the steam turbine theory; and future possibilities of steam turbines and engines. The text is recommended for marine engineers who would like to know more about how steam turbines and engines work.

  • Treatise on Materials Science and Technology

    Volume 5
    • 1st Edition
    • Herbert Herman
    • English
    Treatise on Materials Science and Technology, Volume 5 covers the areas of thermodynamics, radiation effects, and mechanical properties. The book presents articles on solution thermodynamics; and on a fundamental and applied approach to the study of radiation-induced color centers. The text also includes articles on the basic types of metal fatigue and on the relationship between atomic order and the mechanical properties of alloys. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

  • Electric Motor Handbook

    • 1st Edition
    • B. J. Chalmers
    • English
    Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, site testing, commissioning, and maintenance. The text is recommended for engineers who are in need of a convenient guide in the installation, usage, and maintenance of electric motors.

  • Proceedings of the International Symposium on Reduction and Casting of Aluminum

    Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy
    • 1st Edition
    • Christian Bickert
    • English
    The International Symposium on Reduction and Casting of Aluminum is sponsored by the newly founded Light Metals Section. The Symposium will feature casthouse process control, operations, structure and grain refining, carbon, cast alloy modifications, alumina and aluminum - controls and measurements, process and operations.

  • Methods of Functional Analysis for Application in Solid Mechanics

    • 1st Edition
    • Volume 9
    • J. Mason
    • English
    Publications oriented to the interests of engineering scientists and graduate students on topics of functional analysis and its applications are rare - this book has been written to fill the gap in the literature. It provides a readable account of basic mathematic topics, with illustrative examples and chapters devoted to finite elements, variational principles of elasticity and plasticity, variational inequalities and elastic stability. The text is entirely self-contained and covers a wide range of topics and ideas, from elementary concepts to modern theories and applications, and includes numerous references. It is written for engineers, graduate students and researchers who need a general knowledge of modern mathematical methods in solid mechanics.

  • Troubleshooting Analog Circuits

    Edn Series for Design Engineers
    • 1st Edition
    • Robert A. Pease
    • English
    Troubleshooting Analog Circuits is a guidebook for solving product or process related problems in analog circuits. The book also provides advice in selecting equipment, preventing problems, and general tips. The coverage of the book includes the philosophy of troubleshooting; the modes of failure of various components; and preventive measures. The text also deals with the active components of analog circuits, including diodes and rectifiers, optically coupled devices, solar cells, and batteries. The book will be of great use to both students and practitioners of electronics engineering. Other professionals dealing with electronics will also benefit from the text, such as electric technicians.

  • First U.K. National Conference on Heat Transfer

    The Institution of Chemical Engineers Symposium Series, Volume 1.86
    • 1st Edition
    • Sam Stuart
    • English
    First U.K. National Conference on Heat Transfer, Volume 1, documents the proceedings of the conference organized by the U.K. National Committee for Heat Transfer—a joint committee of the Institutions of Chemical and Mechanical Engineers and includes a member nominated by the Heat Transfer Society—held at the University of Leeds, on 3-5 July 1984. It is intended that the Leeds conference will be the first of a series of UK National Conferences which will be held at four-yearly intervals (1984, 1988, 1992 etc). Thus, for people working in the heat transfer field there will be an opportunity to present and discuss their work at a major conference every two years. This volume contains 55 papers that are presented during Sessions 1-10. The papers in Session 1 deal with post dry-out and drop heat transfer. Session 2 presents studies on the thermal hydraulic aspects of accidents and transients. Session 3 contains papers on the thermal hydraulics of reflood. Session 4 focuses on reactor operational heat transfer while Session 5 deals with AGR and other fuel heat transfer. The presentations in Session 6 cover fouling mechanisms while those in Session 7 focus on fouling detection, inhibition, and control. Session 8 takes up heat transfer in regenerators and fixed beds. Session 9 discusses papers on heat exchange networks. Session 10 contains studies on condensation and condensers.

  • Rational Descriptions, Decisions and Designs

    Pergamon Unified Engineering Series
    • 1st Edition
    • Myron Tribus
    • Thomas F. Irvine + 1 more
    • English
    Rational Descriptions, Decisions and Designs is a reference for understanding the aspects of rational decision theory in terms of the basic formalism of information theory. The text provides ways to achieve correct engineering design decisions. The book starts with an understanding for the need to apply rationality, as opposed to uncertainty, in design decision making. Inductive logic in computers is explained where the design of the machine and the accompanying software are considered. The text then explains the functional equations and the problems of arriving at a rational description through some mathematical preliminaries. Bayes' equation and rational inference as tools for adjusting probabilities when something new is encountered in earlier probability distributions are explained. The book presents as well a case study concerning the error made in following specifications of spark plugs. The author also explains the Bernoulli trials, where a probability that a better hypothesis than that already adopted may exist. The rational measure of uncertainty and the principle of maximum entropy with sample calculations are included in the text. After considering the probabilities, the decision theory is taken up where engineering design follows. Examples regarding transmitter and voltmeter designs are presented. The book ends by explaining probabilities of success and failure as applied to reliability engineering, that it is a state of knowledge rather than the state of a thing. The text can serve as a textbook for students in technology engineering and design, and as a useful reference for mathematicians, statisticians, and fabrication engineers.

  • Mechanical Behaviour of Materials V

    Proceedings of the Fifth International Conference, Beijing, China, 3-6 June 1987
    • 1st Edition
    • M. G. Yan + 2 more
    • English
    Provides a thorough up-to-date account of the latest developments in materials science and engineering research and applications. The contributed papers cover all aspects of this important field, including material aspects of fracture in engineering practice, fatigue criteria and material characterisation, environmental effects on fracture, high temperature deformation and failure and mechanical properties and engineering applications of composite and non-metallic materials. Contains approximately 200 papers from acknowledged experts.

Related subjects