Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Risk Assessment and Management of Repetitive Movements and Exertions of Upper Limbs

    Job Analysis, Ocra Risk Indicies, Prevention Strategies and Design Principles
    • 1st Edition
    • Volume 2
    • Daniela Colombini
    • English
    In industrialised countries, musculo-skeletrical disorders of the upper limbs represent one of the commonest work-related diseases. All working activities habitually requiring repetitive upper limb movements and exertions represent a potential risk for these disorders under certain conditions. This practical manual provides a clear and detailed solution to the problem of assessing and consequently managing these risks in conformity with European Union legislation covering the safety and protection of workers' health. The book contains many tables, diagrams and schedules, enhancing its practical value. The methods it proposes for analyzing and designing or redesigning jobs and tasks do not require sophisticated equipment and are largely based on situations encountered in large manufacturing factories. Since risk analysis also concerns how jobs and tasks are organized, many concepts and terms are defined that prevention experts can share with those responsible for planning and organizing manufacturing activities on the shop floor.

  • RF Components and Circuits

    • 1st Edition
    • Joe Carr
    • English
    Some basic knowledge of electronics is assumed, but the essential features of RF are fully described, including the important topic of receiver dynamic which is often overlooked in basic textbooks. The theory and circuit descriptions are geared towards genuine design applications rather than the oversimiplifications and skeleton circuits of many college texts. During his career, the late Joe Carr was one of the world's leading writers on electronics and radio, and an authority on the design and use of RF systems. Whether you are looking for a complete self-study course in RF technology, or a concise reference text to dip into, this book has the solution.

  • Newnes Data Communications Pocket Book

    • 4th Edition
    • Steve Winder + 1 more
    • English
    Despite the complexity of the subject, this wealth of information is presented succinctly and in such a way, using tables, diagrams and brief explanatory text, as to allow the user to locate information quickly and easily. Thus the book should be invaluable to those involved with the installation, commissioning and maintenance of data communications equipment, as well as the end user.

  • Parallel Computational Fluid Dynamics 2001, Practice and Theory

    • 1st Edition
    • P. Wilders + 4 more
    • English
    ParCFD 2001, the thirteenth international conference on Parallel Computational Fluid Dynamics took place in Egmond aan Zee, the Netherlands, from May 21-23, 2001. The specialized, high-level ParCFD conferences are organized yearly on traveling locations all over the world. A strong back-up is given by the central organization located in the USA http://www.parcfd.or... proceedings of ParCFD 2001 represent 70% of the oral lectures presented at the meeting. All published papers were subjected to a refereeing process, which resulted in a uniformly high quality. The papers cover not only the traditional areas of the ParCFD conferences, e.g. numerical schemes and algorithms, tools and environments, interdisciplinary topics, industrial applications, but, following local interests, also environmental and medical issues. These proceedings present an up-to-date overview of the state of the art in parallel computational fluid dynamics.

  • Mechanics of Sheet Metal Forming

    • 2nd Edition
    • Jack Hu + 2 more
    • English
    The basic theory of sheet metal forming in the automotive, appliance and aircraft industries is given. This fills a gap between the descriptive treatments in most manufacturing texts and the advanced numerical methods used in computer-aided-desig... systems. The book may be used by lecturers in undergraduate courses in manufacturing; plentiful exercises and worked examples provide quantitative tutorial problems for students. A separate, but related simulation software package advertised on this page enables students to explore the limits of processes and understand the influence of different process and material variables. Engineers in stamping plants and press shops find the book useful in understanding what happens during forming and why failures occur. The book is also used as a text for industrial short courses that have been given in many countries. Die designers and tooling engineers find the simple treatment of processes useful at the conceptual design stage and also in determining modifications needed to overcome problems indicated by detailed numerical analysis. The original text, published 10 years ago, has been completely rewritten for this edition and newer topics such as hydroforming included. Simple equations governing plastic deformation, press forming, bending, punch stretching and deep drawing are derived and explained. The aim is to provide simple applicable methods rather than complex numerical techniques for practising engineers and for students interested in a quantitative and practical approach. SIMPLIFIED STAMPING SIMULATION SOFTWARE "4S' The analytical treatment in this book is used to develop simulation modules for simple cases of sheet forming such as stamping, deep drawing, bending and hydroforming. Students can investigate the influence of tooling dimensions, material properties and process variables such as friction on the outcome of operations and see from animated models how, for example, press loads develop during forming. Applications using this package greatly enhance interest in the development of theory in the book. The website http://www.mssintern... provides further information and an opportunity to run some of the modules.

  • PIC in Practice

    • 1st Edition
    • David W Smith
    • English
    The book can be used at a variety of levels. While the carefully graded practicals make it ideal for colleges and schools, many university students and professionals are also newcomers to PIC, so this book will provide a painless introduction for more advanced readers. In addition, electronics hobbyists will find this book to be an exciting introduction to the world of microcontrollers.

  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 120
    • Peter W. Hawkes + 2 more
    • English
    Advances in Imaging and Electron Physics merges two long-running serials-Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Health and Safety in Welding and Allied Processes

    • 5th Edition
    • J Blunt + 1 more
    • English
    This edition of Health and safety in welding and allied processes has been extensively revised to take into recent account advances in technology and legislative changes both in the UK and USA. Beginning with a description of the core safety requirements, it goes on to describe the special hazards found in the welding environment – noise, radiation, fume, gases and so on in terms of their effects and the strategies that can be adopted to avoid them.The book takes each major joining technology in turn and discusses the key hazards that are most relevant to each process. There are chapters covering: the common arc and gas welding processes; specialised welding processes; brazing, soldering and thermal spraying; welding and flame spraying of plastics; radiographic inspection; mechanical hazards; noise and vibration; radiation; compressed gases; fume and ventilation; fire and first aid; and welding in situations of increased hazard, such as those requiring special precautions to ensure safe working on vessels contaminated by flammable materials.The aim throughout the book is to explain the hazards clearly and concisely, describe how they arise, and suggest practical methods to achieve safe working.Health and safety in welding and allied processes is an essential resource for welders, their managers and all health and safety practitioners who have welding and related processes taking place in their workplaces.

  • Wind Power in View

    Energy Landscapes in a Crowded World
    • 1st Edition
    • Martin Pasqualetti + 2 more
    • English
    More than ever, travelers are encountering a different sort of landscape, one not only of nature but of technology. Wind Power in View is the first authoritative discourse on the aesthetic impact of wind turbines on the landscape and what can be done about it. It is a detailed and thoroughly illustrated discussion of the issue from several different perspectives. The book also provides an overview of the status of wind energy at the dawn of the new millennium, examines some of the ongoing battles, and offers guidelines on minimizing its visual impact.Taking examples from the United States, Germany, Denmark, Great Britain, and Sweden, Wind Power in View is the first book to tackle the thorny land use questions raised by wind energy's hard won respectability. What will be the future of wind energy? Will it be welcomed as savior, or will it be opposed as a new-age intrusion on open space and landscape preservation? These 11 essays, international in nature and written by objective experts, address landscape issues in creative, original ways.

  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 121
    • Peter W. Hawkes + 2 more
    • English
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Dictionary of Water and Waste Management

    • 1st Edition
    • Paul G Smith
    • English
    The first edition of the Dictionary of Waste and Water Treatment was published in 1981 and was aimed at treatment and treatment design. Over the last 20 years, areas such as air pollution control, solid waste management, hazardous waste management, pipeline management (leakage control, pipeline and sewer renewal) and environmental management systems have all become increasingly important. To reflect this shift, this completely revised and updated edition now covers water and waste management as well as treatment.The dictionary contains definitions of around 7000 terms used in:Water resources and hydrologyDrinking water qualityWaterborne diseasesPublic HealthWater treatmentWastewater treatmentSludge treatmentAir pollution & air pollution controlSolid Waste ManagementHazardous Waste ManagementPipeline Management (leakage control, pipeline & sewer renewal)Environmenta... Management systems (ISO 14000, EMAS)The dictionary has been completely revised and updated to encompass all the changes of the last 20 years to become the most comprehensive dictionary of water and waste management available.

  • Lead and Zinc

    Threats and Opportunities in the Years Ahead
    • 1st Edition
    • Nnamdi Anyadike
    • English
    This report provides a detailed overview of the market position and outlook in these two closely related metals, looking at supply and demand trends in each individually and addressing key issues for the future, including the impact of developments in the environmental arena and the recycling marketplace.

  • Aluminium

    The Challenges Ahead
    • 1st Edition
    • Nnamdi Anyadike
    • English
    This report analyses the state of the aluminium market at the beginning of the 21st century, looking at the aftermath of the MoU and at trends and developments in the established and emerging market economies considering the changes and challenges faced by aluminium in its core automotive, packaging and building end-use sectors.

  • Hazardous Chemicals Handbook

    • 2nd Edition
    • P A CARSON
    • English
    The authors' aim with this handbook, is to provide a rapid ready-reference to help in the often complex task of handling, using and disposing of chemicals safely and with minimum risk to people's health or damage to facilities or to the environment. The book provides look-up data, and concise, clear explanations of general chemical principles, physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to compliance with designated safe practice, control of risks to people's health and limitation of environmental impact.

  • Temperature-Fatigue Interaction

    • 1st Edition
    • Volume 29
    • L. Remy + 1 more
    • English
    This volume contains a selection of peer-reviewed papers presented at the International Conference on Temperature-Fatigue Interaction, held in Paris, May 29-31, 2001, organised by the Fatigue Committee of the Societé Française de Métallurgie et de Matériaux (SF2M), under the auspices of the European Structural Integrity Society. The conference disseminated recent research results and promoting the interaction and collaboration amongst materials scientists, mechanical engineers and design engineers. Many engineering components and structures used in the automotive, aerospace, power generation and many other industries experience cyclic mechanical loads at high temperature or temperature transients causing thermally induced stresses. The increase of operating temperature and thermal mechanical loading trigger the interaction with time-dependent phenomena such as creep and environmental effects (oxidation, corrosion). A large number of metallic materials were investigated including aluminium alloys for the automotive industry, steels and cast iron for the automotive industry and materials forming, stainless steels for power plants, titanium, composites, intermetallic alloys and nickel base superalloys for aircraft industry, polymers. Important progress was observed in testing practice for high temperature behaviour, including environment and thermo-mechanical loading as well as in observation techniques. A large problem which was emphasized is to know precisely service loading cycles under non-isothermal conditions. This was considered critical for numerous thermal fatigue problems discussed in this conference.

  • Fiber Optic Data Communication

    Technology Advances and Futures
    • 1st Edition
    • Casimer DeCusatis
    • English
    This book is an authoritative review of current and future trends in the field of telecommunications. Written by industry experts who are developing leading-edge data communication networks, Fiber Optic Data Communication provides professionals and students alike with a look at emerging technologies and their applications. Four of the chapters have been revised from DeCusatis's best-selling book, Handbook of Fiber Optic Data Communications; the remaining eight chapters are all new. Seven helpful appendices, a glossary, and a list of technical acronyms are included. This book can stand alone or as a companion volume to DeCusatis: Handbook of Fiber Optic Data Communication, Second Edition (February 2002, ISBN: 0-12-207891-8).

  • Newnes Dictionary of Electronics

    • 1st Edition
    • S W Amos + 1 more
    • English
    The revised edition of the Newnes Dictionary of Electronics includes a substantial new section devoted to acronyms and abbreviations. So if you think you know the meaning of ADDER, LAP, FIB, SPICE or WORM, we recommend you check in the Newnes Dictionary of Electronics first.

  • Developing an Effective Safety Culture

    A Leadership Approach
    • 1st Edition
    • James Roughton + 1 more
    • English
    Developing an Effective Safety Culture implements a simple philosophy, namely that working safely is a cultural issue. An effective safety culture will eventually lead to the desired goal of zero incidents in the work place, and this book will provide an understanding of what is needed to reach this goal. The authors present reference material for all phases of building a safety management system and ultimately developing a safety program that fits the culture.This volume offers the most comprehensive approach to developing an effective safety culture. Information is easily accessible as the authors move first through, understanding the cost of incidents, then to perspectives and descriptions of management systems, principal management leadership traits, establishing and evaluating goals and objectives, providing visible leadership, and assigning required responsibilities. In addition, you are given the means to systematically identifying hazards and develop your own hazard inventory and control system. Further information on OSHA requirements for training, behavior-based safety processes, and the development of a job hazard analysis for each task is available as well. Valuable case studies, from the authors' own experience in the industry, are used throughout to demonstrate the concepts presented.

  • Elastic Beams and Frames

    • 2nd Edition
    • J D Renton
    • English
    The book approaches the basic theory of structures from a different perspective from standard pedagogy. There is consideration of work and energy concepts as fundamental and the equations of statics derived from them. Likewise, these concepts, together with that of the characteristic response, are used in the derivation of beam theory. Plane sections remaining plane is then seen as a particular result for isotropic, homogeneous, prismatic beams. The general theory may still be used where none of these conditions holds, and can even be applied to trusses. It also corrects errors in the theory of beam shear. Special topics discussed include non-uniform torsion, the exact analysis of shear, anisotropy, advanced energy methods, optimum structures, and regular frames. Software provided in the book includes seven general purpose programs for analysis of plane, space frames with rigid or pinned joints, and uses the augmented Gaussian elimination process and dynamic storage techniques.

  • Design of Medical Electronic Devices

    • 1st Edition
    • Reinaldo Perez
    • English
    The design of medical electronics is unique because of the background needed by the engineers and scientists involved. Often the designer is a medical or life science professional without any training in electronics or design. Likewise, few engineers are specifically trained in biomedical engineering and have little or no exposure to the specific medical requirements of these devices. Design of Medical Electronic Devices presents all essential topics necessary for basic and advanced design. All aspects of the electronics of medical devices are also covered. This is an essential book for graduate students as well as professionals involved in the design of medical equipment.

  • Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens

    • 1st Edition
    • Richard P. Pohanish
    • English
    The fourth edition of this classic reference by Marshall Sittig presents expansive chemical, health, and safety data for over 1,500 chemicals in the plastics, pharmaceuticals/biot... energy, cleaning solvents, agriculture and other industries. The chemicals are presented alphabetically and classified as a carcinogen, hazardous substance, hazardous waste, or toxic pollutant. Chemical data cover description, exposure limits, harmful effects, first aid, and storage among the other important information included to make appropriate response decisions. Highlights of the expanded information include:• A comprehensive CAS index with the new US, CAS, and RTECS numbers and the DOT ID for all chemicals listed.• The EEC and EINECS international numbers.• International regulatory authority references (US, Canada, Mexico, Europe; federal and local levels).• Chemical formulas.• Detailed physical properties data.• Chemical incompatibility information.• Information about medical surveillance, respirator requirements, first aid, spill, fire and emergency response (including initial isolation and protection action distances), and disposal requirements.• Greatly expanded chemical synonym and trade-name indexes, including international names.• User-friendly synonym listings with cross-references tied to the primary (generic) name.

  • Practical RF Handbook

    • 3rd Edition
    • Ian Hickman
    • English
    New sections and major updates in the third edition include: RF ICs, DBMs, SAW filters, integrated power amplifier modules, active arrays, use of network analysers, and a completely new chapter on digital filtering.

  • Structural Engineering Compendium I

    • 1st Edition
    • Journal Journal Editors
    • English
    This compendium is made up of a selection of the best and most representative papers from a group of Elsevier's structural engineering journals. Selections were made by the journal's editorial teams.The papers appeared in the following journals during 2000:Journal of Constructional Steel Research P.J. Dowling, J.E. Harding, R. Bjorhovde Thin Walled Structures J. Loughlan, K.P. ChongEngineering Structures P.L. GouldComputers and Structures K.J. Bathe, B.H.V. ToppingConstruction and Building Materials M.C. FordeJournal of Wind Engineering & Industrial Areodynamics N.P. JonesMarine Structures P.A. Frieze, A. Mansour, T. YaoEach paper appears in the same format as it was published in the journal; citations should be made using the original journal publication details. It is intended that this compendium will be the first in a series of such collections. A compendium has also been published in the area of geotechnical engineering.

  • Control Systems

    • 1st Edition
    • William Bolton
    • English
    Working through this student-centred text readers will be brought up to speed with the modelling of control systems using Laplace, and given a solid grounding of the pivotal role of control systems across the spectrum of modern engineering. A clear, readable text is supported by numerous worked example and problems.

  • Transportation Disaster Response Handbook

    • 1st Edition
    • Jay Levinson + 1 more
    • English
    Transportation Disaster Response Handbook presents information and strategies for dealing with all types of disasters and looks at the unique aspects of transportation-relat... incidents. It outlines how to prepare for emergencies, what to expect during a disaster, how individuals within the emergency agencies should respond, and how these agencies can quickly mobilize to minimize damage and provide assistance to victims.This practical handbook shows you how to:· Design a disaster preparedness plan· Assess and clarify incidents as soon as they occur· Anticipate and handle issues for each type of disaster· Assist victims and provide aid to emergency personnel· Coordinate with emergency units and aid groups· Search for and recover physical evidence· Deal with the media· Plan business recovery· And much more!The authors use examples of real disasters to illustrate key points and show how to effectively implement strategies before, during, and after a disaster. The Handbook will be an essential resource for police, fire fighters, medical professionals, government and military groups, transportation officials, emergency response planners, aid groups, forensic investigators, and security and business managers.

  • Fluid Flow Measurement

    A Practical Guide to Accurate Flow Measurement
    • 2nd Edition
    • E. Loy Upp + 1 more
    • English
    There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business.

  • Gas Turbine Engineering Handbook

    • 2nd Edition
    • Meherwan P. Boyce
    • English
    The gas turbine is a power plant that produces a great amount of energy for its size and weight and thus has found increasing service in the past 20 years in the petrochemical industry and utilities throughout the world. The gas turbine's compactness, weight, and multiple fuel applications make it a natural power plant for offshore platforms.This second edition is not only an updating of technology, which has seen a great leap forward in the 1990s, but also a rewriting of various sections to better answer concerns about emissions, efficiency, mechanical standards and codes, and new materials and coatings. At a time when energy costs are high, this important handbook expertly guides those seeking optimum use of each unit of energy supplied to a gas turbine.In this book, the author has assimilated the subject matter (including diverse views) into a comprehensive, unified treatment of gas turbines. The author discusses the design, fabrication, installation, operation, and maintenance of gas turbines. The intent of this book is to serve as a reference text after it has accomplished its primary objective of introducing the reader to the broad subject of gas turbines. Thus it is of use to both students of the subject and similarly to professionals as a desk reference in their daily lives.

  • Scaling of Structural Strength

    • 1st Edition
    • Zdenek P. Bazant
    • English
    This book is concerned with a leading-edge topic of great interest and importance, exemplifying the relationship between experimental research, material modeling, structural analysis and design. It focuses on the effect of structure size on structural strength and failure behaviour. Bazant's theory has recently found wide application to all quasibrittle materials, including rocks, ice, modern fiber composites and tough ceramics The topic of energetic scaling, considered controversial until recently, is finally getting the attention it deserves, mainly as a result of Bazant's pioneering work. In this new edition an extra section and new appendices covering the most recent developments in the subject are included.

  • Analysis of Composite Structures

    • 1st Edition
    • Christian Decolon
    • English
    This book provides the basis for calculations of composite structures, using continuum mechanics to facilitate the treatment of more elaborate theories. A composite structure combines traditional materials (such as concrete) with new materials (such as high performance fibres) to explore and develop new structures. The author deals with individual layers in laminate composites, discussing the basic laws that govern mixtures.

  • Surfaces and their Measurement

    • 1st Edition
    • David J. Whitehouse
    • English
    The importance of surface metrology has long been acknowledged in manufacturing and mechanical engineering, but has now gained growing recognition in an expanding number of new applications in fields such as semiconductors, electronics and optics. Metrology is the scientific study of measurement, and surface metrology is the study of the measurement of rough surfaces. In this book, Professor David Whitehouse, an internationally acknowledged subject expert, covers the wide range of theory and practice, including the use of new methods of instrumentation.

  • Supply Chain Design and Management

    Strategic and Tactical Perspectives
    • 1st Edition
    • Manish Govil + 1 more
    • English
    Supply Chain Design and Management introduces the concept of a sharing mechanism that will ensure the sustainability of a supply chain by fair distribution of costs and benefits. This book provides a holistic view of the supply chain from product development, purchasing, manufacturing, distribution and storage, to retailing. The presentation of the enabling technologies in supply chain management will help companies better understand their options.§ Provides a step-by-step framework for designing supply chains at the strategic level§ Written for those who deal with the supply chains on a day-to-day basis as well as those new to the field§ Provides a synthesis of best practices for managing supply chains at the tactical level§ Provides a review of the state-of-the-art in enabling information technologies and business applications§ Explains the concepts with examples from the industry and simple mathematical formulations§ Is accessible to graduate students for an excellent understanding of how supply chains work and can join the industry armed with the knowledge of the workings of supply chains

  • A Guide to Wear Problems and Testing for Industry

    • 1st Edition
    • Michael Neale + 1 more
    • English
    Machine component wear is one of the costliest problems within industry. In fact, a 1997 survey in the UK placed wear costs at 25% of turnover, or approximately $1 billion. In many cases, making design and or material changes can reduce this cost by 50% or more! This handbook reviews component wear, and guides the reader through solutions to wear problems, testing methods for materials and wear mechanisms, and information on wear performance of different materials for components. The bottom line is that it helps to reduce ""the bottom line"" removing risks associated with changes to machinery.This book is based on practical use. It outlines the following practices: reviews of wear mechanisms that occur in various types of machinery and solutions to industrial wear problems; guides to relative wear performance of different component materials; comparison of the wear performance of those materials; reviews of laboratory tests to simulate wear, and selection of appropriate tests; identification of improved materials, and; examination of worn surfaces.

  • Reflow Soldering Processes

    • 1st Edition
    • Ning-Cheng Lee
    • English
    Focused on technological innovations in the field of electronics packaging and production, this book elucidates the changes in reflow soldering processes, its impact on defect mechanisms, and, accordingly, the troubleshooting techniques during these processes in a variety of board types. Geared toward electronics manufacturing process engineers, design engineers, as well as students in process engineering classes, Reflow Soldering Processes and Troubleshooting will be a strong contender in the continuing skill development market for manufacturing personnel.Written using a very practical, hands-on approach, Reflow Soldering Processes and Troubleshooting provides the means for engineers to increase their understanding of the principles of soldering, flux, and solder paste technology. The author facilitates learning about other essential topics, such as area array packages--including BGA, CSP, and FC designs, bumping technique, assembly, and rework process,--and provides an increased understanding of the reliability failure modes of soldered SMT components. With cost effectiveness foremost in mind, this book is designed to troubleshoot errors or problems before boards go into the manufacturing process, saving time and money on the front end. The author's vast expertise and knowledge ensure that coverage of topics is expertly researched, written, and organized to best meet the needs of manufacturing process engineers, students, practitioners, and anyone with a desire to learn more about reflow soldering processes. Comprehensive and indispensable, this book will prove a perfect training and reference tool that readers will find invaluable.

  • Diode Laser Materials and Devices - A Worldwide Market and Technology Overview to 2005

    • 1st Edition
    • R. Szweda
    • English
    This report examines the development of the diode laser industry over a six-year period, 2000 to 2005, incorporating analysis of trends in markets, technologies and industry structure. It is designed to provide key information to users and manufacturers of substrates, epitaxial wafers (epiwafers) and devices.The coverage includes components, laser diodes, and the semiconducting (SC) wafers and epiwafers on which most of these devices are made. The geographical coverage of the report includes North America, Japan and Europe, which together will account for over 90% of the production and consumption of diode laser materials and devices over the next five years. However, many other countries have activities in this field including South-East Asia (Taiwan, South Korea, Singapore, Malaysia etc), China, India, Australia and Eastern Europe (Russia, Poland, Hungary, the Czech Republic) amongst others. Activities in these countries are commented on in the text where relevant, but are not quantified in the market data. Chapter 1 is an introduction to the market study.Chapter 2 contains an executive summary.Chapter 3 overviews materials markets. The size, quality, and particularly the price, of substrates and wafers are key factors in determining the ability of companies to produce competitive laser products. Chapter 3 also examines trends in materials technologies for laser diodes, the impact of the device markets on wafer demand, and the main suppliers. This chapter introduces the semiconductor materials that are presently or will likely become important to the fabrication of diode laser devices. The principal distinguishing properties of these materials are explained with reference to their application.Chapter 4 chapter examines the basic application sectors for laser diode devices as well as the basic commercial opportunities, changes and forces acting within each sector. The chapter also examines the market for the basic types of device as well as the promising newer types. For each type of device, market data and forecasts are provided and future prospects described. The application data are presented for the following industrial groups:• Automotive• Computers• Consumer• Industrial• Military and Aerospace• Telecommunications• OthersA full 5-year forecast and analysis is provided by application and region.Chapter 5 is a technology overview. In this chapter a background and overview of developments in the principal technological R&D and production processes for devices is provided. The main focus is on the most important enabling technology for the production of the present and future generations of laser diodes and related devices. This process is crystal growth and involves the following sequence:• Bulk growth of single crystals• Epitaxial growth of semiconductor single crystal layers• Ion implantation• Device fabrication, ie gate and contact formation, etc• Packaging & testChapter 6 profiles substrate suppliers, epiwafers suppliers and merchant and captive producers of GaAs devices.Chapter 7 lists universities and selected industrial labs involved in the areas of diode laser research.Chapter 8 is a directory of suppliers.Chapter 9 provides acronyms and exchange rates.

  • Power Electronic Control in Electrical Systems

    • 1st Edition
    • Enrique Acha + 3 more
    • English
    Power Electronic Control in Electrical Systems fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods.

  • Embedded Systems and Computer Architecture

    • 1st Edition
    • Graham R Wilson
    • English
    The author has taught the design and use of microprocessor systems to undergraduate and technician level students for over 25 years.

  • Plant Engineer's Reference Book

    • 2nd Edition
    • DENNIS A SNOW
    • English
    A plant engineer is responsible for a wide range of industrial activities, and may work in any industry. The Plant Engineer's Reference Book 2nd Edition is a reference work designed to provide a primary source of information for the plant engineer. Subjects include the selection of a suitable site for a factory and provision of basic facilities, including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes. Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. The editor, Dennis Snow, has experience of a wide range of operations in the UK, Europe, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, the Plant Engineer's Reference Book, 2nd Edition provides complete coverage of the information needed by plant engineers in any industry worldwide.

  • Computer-Managed Maintenance Systems

    A Step-by-Step Guide to Effective Management of Maintenance, Labor, and Inventory
    • 2nd Edition
    • William W. Cato + 1 more
    • English
    Effective resource management and reliable equipment are essential for optimum plant performance. Computer-Managed Maintenance Systems goes beyond the simple selection and implementation of a CMMS. It also defines the changes in infrastructure, management philosophy and employee skills that must be implemented to gain maximum benefits from the CMMS. The book is designed to address the information needs of all levels of plant management. In this new edition, the authors have added a chapter specifically on the latest technology, Application Solution Providers (ASP) that has revolutionized the way CMMS are used and the benefits they can offer to a business. This solution provides integrated software, hardware and networking technology along with Information Technology (IT) consulting services into an outsourced package. A new appendix on Key Performance Indicators has also been added.

  • Fire Hazards in Industry

    • 1st Edition
    • Norman Thomson
    • English
    Significant loss to business occurs through fires in the workplace. Whether large or small, fire causes personal suffering, damage to plant, equipment and buildings, and loss of business.Fire legislation has changed over the past few years, especially with the introduction of European Directives. New regulations mean that employers have to carry out fire risk assessment and then, as a result of their findings, put in place control measures to prevent loss of life. Fire Hazards in Industry has been designed to cover, in general terms, exactly what is required of employers. It is written in simple language and considers the basics of good fire safety management. After reading Fire Hazards in Industry, any employer, safety professional or fire safety officer should be able to install a system for carrying out fire risk assessment. In addition to sections relating to the legal aspects of fire prevention, the book explains the concepts of fire modelling, explosions and combustion reactions. There is also a section relating to common industry fire hazards and hazards associated with electrical equipment. Knowledge of all these topics would be required if a person were to attempt to carry out fire risk assessment. Throughout the book, past case histories are used to illustrate certain aspects of fire and the causes of fire. The cases used have all been published by the Health and Safety Executive as a result of their investigations. These include; Abbeystead, Frodingham steelworks, HMS Glasgow, BP Grangemouth and many more.

  • Fiber Optic Cabling

    • 2nd Edition
    • Barry Elliott + 1 more
    • English
    Essential reading for anyone involved in fiber optic cable applications, from installation engineers to IT professionals. Fiber Optic Cabling is a practical guide to all aspects of designing, specifying and installing systems for LANs and other data communications applications. The second edition has been completely revised and updated by Barry Elliott, taking into account the major developments in LAN and transmission technology over the past 10 years. The latest legislation is also dealt with, including standards relating to flammability. Cutting edge topics such as photonic switching, wavelength division multiplexing and plastic fiber, and their implications for the future are also explored.An international perspective of the subject is taken, with the author looking at all the practical implementations for fiber optic cabling, using American, European and International ISO standards. Barry Elliott has twenty years experience in the telecommunications business and became one of the first BICSI Registered Cabling Distribution Designers in Europe in 1999. He currently specializes in optical fiber and structured cabling with Brand-Rex Ltd. In 1991 Mike Gilmore established The Cabling Partnership, a leading cabling design consulting and training organization. Mike is chairman of the UK BSI Premises Cabling Experts Panels and Convenor of the equivalent CENELEC Working Group. Mike also acts as both the Technical and Standards Director of the UK Fibreoptic Industry Association.

  • Coordinating User Interfaces for Consistency

    • 1st Edition
    • Jakob Nielsen
    • English
    In the years since Jakob Nielsen's classic collection on interface consistency first appeared, much has changed, and much has stayed the same. On the one hand, there's been exponential growth in the opportunities for following or disregarding the principles of interface consistency-more computers, more applications, more users, and of course the vast expanse of the Web. On the other, there are the principles themselves, as persistent and as valuable as ever. In these contributed chapters, you'll find details on many methods for seeking and enforcing consistency, along with bottom-line analyses of its benefits and some warnings about its possible dangers. Most of what you'll learn applies equally to hardware and software development, and all of it holds real benefits for both your organization and your users.

  • Ceramic Technology and Processing

    A Practical Working Guide
    • 1st Edition
    • Alan G. King
    • English
    Perfect for the new technician or engineer entering the ceramics industry as well as for the ""old hand"" who needs an update on some aspect of ceramics processing, this resource provides practical laboratory-oriented answers to such typical processing problems as particle segregation, agglomeration, contamination, pressure gradients, adherence to tooling, and temperature gradients during drying and firing.The author examines the difficulties of practical testing and processing in the ceramic laboratory, such as vast differences in scale and equipment, and shows how to evaluate results taking such variables into account. Once the laboratory work is satisfactorily completed, the rest of the book explores serious issues involved in transferring technology from the lab bench to the plant floor and then to the customer. The author gives advice on dealing with real-life problems such as allocating human and capital resources and overcoming customer wariness of being first to try new procedures and processes.Each section contains practical, hands-on suggestions on performing and sometimes avoiding certain tasks, bringing to the reader key information that is at best sparsely available in the industry. As the author states, ""Laboratory skills are gained by hands-on experience. The intent of this book is to accelerate the process.""

  • Servicing TV, Satellite and Video Equipment

    • 1st Edition
    • EUGENE TRUNDLE
    • English
    A genuinely practical hands-on guide for service engineers -- including a new section on the latest digital equipment.Previous editions of this unique `hands-on' fault-finding book became the guide and mentor for thousands of service technicians and engineers in many countries and was widely adopted as a college text. Based on many years of practical bench and field experience, the book wastes little space on theoretical principles and circuit description where it is well covered elsewhere: here the emphasis is on the practical business of fault diagnosis and repair.Twenty chapters focus on specific aspects of the equipment, dwelling longest on the most troublesome: TV power supplies, line timebases and video deck machines. Other chapters examine test-gear, intermittent faults diagnosis in digital TV and video equipment, satellite-receiver repair techniques, interfacing/hookups and workshop practice. A symptom index is included for easy reference. Written for PAL, the differences for those working with NISC and other standards are also covered.Eugene Trundle is the UK's leading author on Servicing and Video Technology, and a full time TV and video service engineer. His articles appear regularly in Television and several other magazines. He is the author of the best-selling Newnes TV and Video Engineer's Pocket Book and Newnes Guide to TV and Video Technology.

  • Inverse Problems in Engineering Mechanics III

    • 1st Edition
    • G.S. Dulikravich + 1 more
    • English
    Inverse Problems are found in many areas of engineering mechanics and there are many successful applications e.g. in non-destructive testing and characterization of material properties by ultrasonic or X-ray techniques, thermography, etc. Generally speaking, inverse problems are concerned with the determination of the input and the characteristics of a system, given certain aspects of its output. Mathematically, such problems are ill-posed and have to be overcome through development of new computational schemes, regularization techniques, objective functionals, and experimental procedures. This volume contains a selection of peer-reviewed papers presented at the International Symposium on Inverse Problems in Engineering Mechanics (ISIP2001), held in February of 2001 in Nagano, Japan, where recent development in inverse problems in engineering mechanics and related topics were discussed.The following general areas in inverse problems in engineering mechanics were the subjects of the ISIP2001: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic non-destructive testing, elastodynamic inverse problems, thermal inverse problems, and other engineering applications. These papers can provide a state-of-the-art review of the research on inverse problems in engineering mechanics.

  • FRP Composites in Civil Engineering

    • 1st Edition
    • Jin-Guang Teng
    • English
    This Proceedings contains the papers presented at the International Conference on FRP Composites in Civil Engineering, held in Hong Kong, China, on 12-15 December 2001.The papers, contributed from 24 countries, cover a wide spectrum of topics and demonstrate the recent advances in the application of FRP (Fibre-reinforced polymer) composites in civil engineering, while pointing to future directions of research in this exciting area.

  • Manufacturing Information and Data Systems

    Analysis, Design and Practice
    • 1st Edition
    • Franjo Cecelja
    • English
    Recent years have witnessed an increase in the use of information technology in manufacturing, so much so that it has rapidly permeated the organization at every level. Consequently, there is a growing need for those related to or interested in manufacturing to understand the nature of this technology and the way it can best be used to increase competitive advantage, hence the profit. This book is a contribution towards better understanding of information technology and information systems and their application in manufacturing.The main feature of this book is that it addresses information systems and its application in manufacturing with a view to improving the competitive advantage. It offers fundamental understanding of information technology and underpinning principles, but also practical issues related to its implementation and operation. Additionally, the material is structured such that the reader is taken logically from basic principles to practical issues of information systems. Yet, chapters tend to be sufficiently independent making the text suitable for those with particular interest.

  • Artificial Intelligence in Agriculture 2001

    • 1st Edition
    • I. Farkas
    • English
    This Proceedings contains the papers presented at the AIA'2001 Workshop on "Artificial Intelligence in Agriculture", held at the Hotel Eben in Budapest and the Campus of the Szent István University Gödöllo, Hungary, on 6-8 June 2001.The papers demonstrate the aim of the workshop, which was to bring together leading researchers and practitioners from academy and industry in order to favour the emergence or consolidation of bridges between AI and its applications in Agriculture and domains connected to it (in particular, environmental sciences).This Proceedings concentrate on five main topic areas: Fundamentals, Decision tools; Neural networks; Quality and measurements; Fuzzy modelling and control and Modelling and control.

  • Waves in Ocean Engineering

    • 1st Edition
    • Volume 5
    • M.J. Tucker + 1 more
    • English
    "Waves in Ocean Engineering" covers the whole field of wave studies of interest to applied oceanographers and ocean engineers. It has considerable relevance to coastal engineering.The book is split into 12 sections, the first of which is devoted to the practical applications of wave studies and to the history of wave research. The rest of the book covers the measurement of waves, including remote sensing; the analysis and interpretation of wave data; estimating the properties of the extreme "Design Wave", as well as of the generality of waves for fatigue calculations; waves in finite depth, wave generation by wind and wave forecasting models; non-linear effects, and errors and uncertainties in wave data.

  • Robotics, Mechatronics, and Artificial Intelligence

    Experimental Circuit Blocks for Designers
    • 1st Edition
    • Newton C. Braga
    • English
    Accessible to all readers, including students of secondary school and amateur technology enthusiasts, Robotics, Mechatronics, and Artificial Intelligence simplifies the process of finding basic circuits to perform simple tasks, such as how to control a DC or step motor, and provides instruction on creating moving robotic parts, such as an "eye" or an "ear." Though many companies offer kits for project construction, most experimenters want to design and build their own robots and other creatures specific to their needs and goals. With this new book by Newton Braga, hobbyists and experimenters around the world will be able to decide what skills they want to feature in a project and then choose the right "building blocks" to create the ideal results. In the past few years the technology of robotics, mechatronics, and artificial intelligence has exploded, leaving many people with the desire but not the means to build their own projects. The author's fascination with and expertise in the exciting field of robotics is demonstrated by the range of simple to complex project blocks he provides, which are designed to benefit both novice and experienced robotics enthusiasts. The common components and technology featured in the project blocks are especially beneficial to readers who need practical solutions that can be implemented easily by their own hands, without incorporating expensive, complicated technology.

  • Handbook of Production Management Methods

    • 1st Edition
    • Gideon Halevi
    • English
    This unique book provides a guide to the selection of appropriate production and manufacturing methods for postgraduate and professional manufacturing engineers. It starts by helping the reader to identify the required objectives of industrial management for their particular situation. Having identified the objectives an analytical assessment of the available production and management methods is made. The analytical system presents an objective method of production selection. For example, this practical book will help the reader to decide whether or not a local Just-in-Time process is needed or a full chain JIT method is needed. Alternatively the problem may be deciding between set-up time reduction or changeover time reduction. Should TQM be ceded to PCIs? This book covers nearly all methods of production and manufacturing and will prove the most comprehensive guide to choosing and using these methods.

Related subjects