Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Thermal Stresses IV

    • 1st Edition
    • R.B. Hetnarski
    • English
    This is the fourth volume of the handbook Thermal Stresses. Following the principles established when the first volume was published in 1986, the fourth volume consists of six separate chapters prepared by specialists in the field. Each chapter is devoted to a different topic in the area of Thermal Stresses. Many results have been published for the first time in Thermal Stresses IV. The exposition of the material is on the state-of-the art level, which should be appropriate for graduate students, researchers, and engineers specializing in the field of stress analysis. In most cases the material is presented with some historical perspective.A large number of references provided will allow the readers to augment their knowledge, after studying a particular chapter.

  • Mechanics of Transformation Toughening and Related Topics

    • 1st Edition
    • Volume 40
    • J.H. Andreasen + 1 more
    • English
    Since the benefit of stress-induced tetragonal to monoclinic phase transformation of confined tetragonal zirconia particles was first recognized in 1975, the phenomenon has been widely studied and exploited in the development of a new class of materials known as transformation toughened ceramics (TTC). In all materials belonging to this class, the microstructure is so controlled that the tetragonal to monoclinic transformation is induced as a result of a high applied stress field rather than as a result of cooling the material below the martensitic start temperature.The significance of microstructure to the enhancement of thermomechanical properties of TTC is now well understood, as are the mechanisms that contribute beneficially to their fracture toughness. The micromechanics of these mechanisms have been extensively studied and are therefore presented here in a cogent manner.The authors also review dislocation formalism for the modelling of cracks and Eshelby's technique. In compiling this monograph the authors present the most up-to-date and complete review of the field and include several topics which have only recently been fully investigated.

  • Principles of Electron Optics

    Wave Optics
    • 1st Edition
    • Peter W. Hawkes + 1 more
    • English

  • Principles of Electron Optics

    Basic Geometrical Optics
    • 1st Edition
    • Peter W. Hawkes + 1 more
    • English

  • Intelligent Sensors

    • 1st Edition
    • Volume 3
    • H. Yamasaki
    • English
    Sensors are the front end devices for information acquisition from the natural and/or artificial world. Higher performance of advanced sensing systems is achieved by using various types of machine intelligence. Intelligent sensors are smart devices with signal processing functions shared by distributed machine intelligence.Typical examples of intelligent sensors are the receptors and dedicated signal processing systems of the human sensory systems. The most important job of information processing in the sensory system is to extract necessary information from the receptors signals and transmit the useful information to the brain. This dedicated information processing is carried out in a distributed manner to reduce the work load of the brain. The processing also lightens the load of signal transmission through the neural network, the capacity of which is limited.Although the performance of the receptors in our human sensory system is not always ideal and is frequently inferior to that of man-made sensors, the total performance is usually far superior to those of our technical sensing systems. The weak points of human receptors are masked by the information processing. This processing makes our sensory system adaptable to the environment and optimizes system performance.The basic idea of this book, which contains new computing paradigms, is that the most advanced intelligent sensing system is the human sensory system. Section I reviews the technologies of intelligent sensors and discusses how they developed. Typical approaches for the realization of intelligent sensors emphasizing the architecture of intelligent sensing systems are also described. In section II, fundamental technologies for the fabrication of intelligent sensors and actuators are presented. Integration and micro-miniaturizatio... techniques are emphasized. Section III presents advanced technologies approaching human sensory systems, these technologies are not directly aimed at practical applications, but introduce the readers to the development of engineering models of sensory systems. Technologies of integrated intelligent sensors, which will shortly be in use are introduced in section IV. In section V, examples are given of intelligent sensing systems which are used in industrial installations. Hardware for machine intelligence is not integrated at present, but can soon be implemented in the monolithic integrated structure. Without this machine intelligence, new functions, for example, self diagnosis or defects identification, cannot be realized. This section also demonstrates the potential of intelligent sensors in industry. Section VI introduces two interesting topics which are closely related to intelligent sensing systems. The first one is multisensor fusion. It is expected to be one of the fundamental and powerful technologies for realizing an advanced intelligent sensing systems. The second is visualizing technology of the sensed states for easy comprehension of the dynamic multi-dimensional state. This is useful for intelligent man-machine interfaces.This book will be recognised by readers as a milestone in the rapid progress of intelligent sensors.

  • Practical Electronic Fault-Finding and Troubleshooting

    • 1st Edition
    • ROBIN PAIN
    • English
    It isn't enough to be able to design. It isn't even enough to be able to debug. To be a real fault finder, you must be able to get a feel for what is going on in the circuit you are examining. In this book Robin Pain explains the basic techniques needed to be fault finder.Simple circuit examples are used to illustrate principles and concepts fundamental to the process of fault finding. This is not a book of theory. It is a book of practical tips, hints, and rules of thumb, all of which will equip the reader to tackle any job, whether it is fixing a TV, improving the sound from a hi-fi, or locating the fault in a piece of process equipment. You may be an engineer or technician in search of information and guidance, a college student, a hobbyist building a project from a magazine, or simply a keen self-taught amateur who is interested in electronic fault finding but finds books on the subject too mathematical or specialised. But you have one thing lacking, no fault-finding strategy. Seasoned professional designers have that peculiar knowledge of their own work and specialised knowledge of its components to allow them to analyse and remove faults quickly on the spot (design errors take a little longer!). Fault finders can never have this depth of specialisation;comme... pressures demand a minimum-knowledge-to... approach. Practical Electronic Fault Finding and Troubleshooting describes the fundamental principles of analog and digital fault finding (although of course there is no such thing as a `digital fault' - all faults are by nature analog). This book is written entirely for a fault finder using only the basic fault-finding equipment: a digital multimeter and an oscilloscope. The treatment is non-mathematical (apart from Ohm's Law) and all jargon is strictly avoided. Robin Pain was originally trained to service colour TV, and has worked as an industrial fault finder for manufacturers of mobile radio, audio equipment, microcomputers and medical equipment. He has lectured at home and abroad on microcomputer fault finding.

  • Stochastic Digital Control System Techniques

    Advances in Theory and Applications
    • 1st Edition
    • Volume 76
    • English
    Praise for the Series:"This book will be a useful reference to control engineers and researchers. The papers contained cover well the recent advances in the field of modern control theory."-IEEE Group Correspondence"This book will help all those researchers who valiantly try to keep abreast of what is new in the theory and practice of optimal control."--Control

  • Symbolic Projection for Image Information Retrieval and Spatial Reasoning

    Theory, Applications and Systems for Image Information Retrieval and Spatial Reasoning
    • 1st Edition
    • Shi-Kuo Chang + 1 more
    • English
    Information systems with an abundance of graphics data are growing rapidly due to advances in data storage technology, the development of multimedia communications across networks, and the fact that parallel computers are leading to faster image processing systems. This book addresses image information retrieval and spatial reasoning using an approach called Symbolic Projection, which supports descriptions of the image content on the basis of the spatial relationships between the pictorial objects. Image information systems have a wide variety of applications, including information retrieval on the World Wide Web, medical pictorial archiving, computer-aided design, robotics, and geographical information systems, and this book is comprehensively illustrated with examples from these areas. Symbolic Projection now forms the basis of an enormous number and range of information retrieval algorithms, and also supports query-by-picture and qualitative spatial reasoning. Both authors are international experts in the field, and the book will serve as an excellent source for those working in multimedia systems and image information systems who wish to find out more about this exciting area.

  • Handbook of Computational Fluid Mechanics

    • 1st Edition
    • English
    This handbook covers computational fluid dynamics from fundamentals to applications. This text provides a well documented critical survey of numerical methods for fluid mechanics, and gives a state-of-the-art description of computational fluid mechanics, considering numerical analysis, computer technology, and visualization tools. The chapters in this book are invaluable tools for reaching a deeper understanding of the problems associated with the calculation of fluid motion in various situations: inviscid and viscous, incompressible and compressible, steady and unsteady, laminar and turbulent flows, as well as simple and complex geometries.

  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 95
    • Peter W. Hawkes
    • English
    Advances in Imaging and Electron Physics is the merger of two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. It features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computingmethods used in all these domains.

  • Computer Techniques and Algorithms in Digital Signal Processing

    Advances in Theory and Applications
    • 1st Edition
    • Volume 75
    • English
    Covers advances in the field of computer techniques and algorithms in digital signal processing.

  • Simplified Design of Switching Power Supplies

    • 1st Edition
    • John Lenk
    • English
    Simplified Design of Switching Power Supplies is an all-inclusive, one-stop guide to switching power-supply design. Step-by-step instructions and diagrams render this book essential for the student and the experimenter, as well as the design professional. Simplified Design of Switching Power Supplies concentrates on the use of IC regulators. All popular forms of switching supplies, including DC-DC converters, inverters, buck, boost, buck-boost, pulse frequency modulation, pulse width modulation, current-mode control and pulse skipping, are described in detail. The design examples may be put to immediate use or may be modified to meet a specific design goal. As an instructional text for those unfamiliar with switching supplies, or as a reference for those in need of a refresher, this unique book is essential for those involved in switching power-supply design.

  • Op Amps: Design, Application, and Troubleshooting

    • 2nd Edition
    • David Terrell
    • English
    OP Amps deliberately straddles that imaginary line between the technician and engineering worlds. Topics are carefully addressed on three levels: operational overview, numerical analysis, and design procedures. Troubleshooting techniques are presented that rely on the application of fundamental electronics principles. Systematic methods are shown that can be used to diagnose defects in many kinds of circuits that employ operational amplifiers. One of the book's greatest strengths is the easy-to-read conversational writing style. The author speaks directly to the student in a manner that encourages learning. This book explains the technical details of operational amplifier circuits in clear and understandable language without sacrificing technical depth.

  • Introduction to Marine Engineering

    • 2nd Edition
    • D A Taylor
    • English
    This second edition deals comprehensively with all aspects of a ship's machinery from propulsion and steering to deck machinery and electrical equipment with a strong emphasis upon correct and safe procedures.Material has been added and revised to reflect the greater weight now being placed upon the cost-effective operation of ships; in terms of greater equipment reliability, more fuel-efficient engines, the ever-increasing shift towards automatically operated machinery, and the need for fewer engineering crew. This is an invaluable guide for professionals but equally covers the requirements for Class 4 and Class 3 Engineer's Certificates of Competency, the first two years of the Engineer Cadet Training Scheme, and the Engineering Knowledge syllabus for the Master's Certificate.

  • Pipe Drafting and Design: Workbook

    • 1st Edition
    • Roy A. Parisher
    • English
    Contains related problems that can be solved using manual or computer techniques. A disk contains AutoCAD problems.

  • Techniques in Discrete and Continuous Robust Systems

    Advances in Theory and Applications
    • 1st Edition
    • Volume 74
    • English
    "This book will be a useful reference to control engineers and researchers. The papers contained cover well the recent advances in the field of modern control theory."--IEEE Group Correspondence"This book will help all those researchers who valiantly try to keep abreast of what is new in the theory and practice of optimal control."--Control

  • Active Control of Vibration

    • 1st Edition
    • Christopher C. Fuller + 2 more
    • English
    This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers.

  • Guide to the Collision Avoidance Rules

    • 5th Edition
    • A. N. Cockcroft + 1 more
    • English
    This is the definitive work on the Collision Avoidance Rules for all concerned with the practical and legal aspects of their interpretation. This new edition incorporates the 1993 Amendments to the International Regulations for Preventing Collisions atSea 1972, which came into force in 1995. The book sets out all the Rules with clear comments on their meaning and on the significance of the changes, and with excerpts from Court judgements that show how they have been interpreted in law. Arrangements of lights and signals are illustrated in colour, and diagrams explain certain aspects of the Steering and Sailing Rules.

  • Principles of Engineering Manufacture

    • 3rd Edition
    • V. Chiles + 3 more
    • English
    The third edition of this text, formerly known as Principles of Engineering Production, has been thoroughly revised and updated and continues to provide students with a comprehensive overview of the technical considerations for the entire manufacturing process. In keeping with the developments in manufacturing technology, this new edition reflects the major advances in recent years, in particular, looking at the transition to computer controlled machinery and the developments in computer applications.Beginni... with specification and standardisation, it analyses the key aspects of the manufacturing process and pays particular attention to the crucial considerations of quality and cost. In addition, the coverage of materials has been extended to account for the increased availability and complexity of non-metals. The addition of a number of case studies, new worked examples and problems, make this text an invaluable introduction to engineering manufacture. It is also a useful and straightforward reference text for the professional engineer.

  • Pipe Drafting and Design:

    Using Manual, AutoCAD, and PRO-PIPE Applications
    • 1st Edition
    • Roy A. Parisher + 1 more
    • English
    This book takes students from drafting and design fundamentals into the computer age with detailed advice on the use of AutoCAD and PRO-PIPE.Pipe Drafting and Design provides students with the basic skills they will need to prepare a wide range of piping drawings. It presents a step-by-step approach to the basic fundamentals students will need to begin a successful career in industrial drafting and design. Each chapter includes helpful exercises and questions designed to help readers review and practice the concepts presented.

  • Vehicle Security Systems

    Build Your Own Alarm and Protection Systems
    • 1st Edition
    • A L Brown
    • English
    A concise and thoroughly practical guide to building and installing car alarms. The project-based approach makes this book ideal for students and hobbyists; design and installation engineers will also find it of interest.Every circuit in this book is clearly described and illustrated, and contains components that are easy to source. Advice and guidance are based on real experience, and the designs themselves have been rigorously put to use on some of the most car-crime-ridden streets in the world. The designs in this book include systems as simple as a warning beacon, a range of immobilisers, and a basic alarm system; and more advanced systems that include add-on features such as a personal attack button and a courtesy light delay. Intruder detectors are described, and full constructional details are given including a guide to fault diagnosis and step-by-step installation instructions.

  • Magneto-Resistive Heads

    Fundamentals and Applications
    • 1st Edition
    • John C. Mallinson
    • English
    The intent of the book is to discuss the physics and engineering of magneto-resistive heads which are playing an extremely important role in the modern technology of hard disk drives. The book is comprehensive and self-contained. Most of the material is presented in a non-mathematical manner to make it more "digestible" for students and practical engineers. Each chapter concludes with a listing of the principle references in order to facilitate the reader's further study. The author is a well-recognised expert in the field and published The Foundations of Magnetic Recording with Academic Press in 1987.

  • Finite Element Techniques in Structural Mechanics

    • 1st Edition
    • Carl T. F. Ross
    • English
    This advanced undergraduate and postgraduate text serves for courses in many engineering disciplines and professionals in industrial or academic research. It is written in a step-by-step methodological approach so that readers can acquire knowledge, either through formal engineering courses or by self-study. Also useful for industrial engineers as a reference manual.

  • The Chemistry and Processing of Wood and Plant Fibrous Material

    Cellucon ’94 Proceedings
    • 1st Edition
    • J F Kennedy + 2 more
    • English
    This book covers the production, management and changing patterns of global wood and fibre resources, with emphasis on the inter-disciplinary character of wood and related plant materials in terms of their resource value.

  • Optimisation of Composite Structures Design

    • 1st Edition
    • A Miravete
    • English
    Composite materials have been used more and more during the last decade to lighten structures. But until now, there has been no clear way of establishing how to design properly optimised laminated composite plates with no reduction in strength. Most modern references lack adequate information for the designer wanting to tailor or synthesise a design. This exciting package offers a solution. It relates the theory of composite materials to real life and provides 'rules' for designing composites structures properly and in an optimum way.In the book, Professor Miravete demonstrates the optimisation of beams, plates and sandwich constructions in the designs of advanced composite materials. He also illustrates optimal material systems, fibre orientations and lay-up through functions of geometry, load type and boundary conditions. The associates software, on two disks, will enableusers to adapt the information to their own requirements and is very user-friendly with helpful manuals. This will be an essential package for designers and engineers in a wide range of areas, from aeronautics to automotive andmarine as well as general industry.Chapter 1 provides a general background on composite materials.Chapters 2, 3, 4, and 5 are concerned with constant thickness composite structures, and provide a survey of various design methodologies of shells, plates and sandwich constructions.Chapte... 6, 7, 8 and 9 examine variable thickness composite structures, and consider beams, plates and sandwiches.

  • Finite Element Programs in Structural Engineering and Continuum Mechanics

    • 1st Edition
    • Carl T. F. Ross
    • English
    Bridging the gap between theoretical texts and the massive and expensive software packages, this handbook covers finite element programming in a wide range of problems in mechanical, civil, aeronautical and electrical engineering. Comprehensive, it ranges from the static analysis of two- and three-dimensional structures to stress analysis of thick slabs on elastic foundations, and from two- and three- dimensional vibration analysis problems to two-dimensional field problems including heat transfer and acoustic vibrations.The 24 printouts of powerful and valuable engineering computer programs, written in QUICK BASIC, are introduced by a preliminary chapter giving useful hints and formulae intended for structural design. The programs are capable of analysing problems in engineering design and manufacture, with text fully describing how to use the computer programs for their particular problems or tasks. The finite element method is used in all the programs, and the problems for analysis can be of quite complex design and shape and with complex boundary conditions.

  • Classifying Explosion Prone Areas for the Petroleum, Chemical and Related Industries

    • 1st Edition
    • W.O.E. Korver
    • English
    The degree of danger in the atmosphere of a hazardous location needs to be determined prior to selecting an acceptable electrical equipment installation. If maximum safety is the predominant factor in determining the type of electrical installations, the cost of electrical equipment will be extremely high. If low cost of electrical installation is the predominant factor, safety to personnel and equipment may be unacceptably low. It is, therefore, necessary to find a point of balance at which the cost and safety requirements are both satisfied and acceptable. In nine out of ten cases, a hazardous location is classified much too conservatively. The reason for this conservative approach is a lack of knowledge and a misunderstanding of the actual concept of safety and danger. This book provides an in-depth understanding of the factors that influence the classification of a hazardous location. One factor, in combination with one or more other factors, will have an impact on the level of danger and its hazardous boundaries. These factors and their influences are explained in detail, and once their impact is understood, the classification of a hazardous location becomes a straightforward procedure.

  • Handbook of Emergency Response to Toxic Chemical Releases

    A Guide to Compliance
    • 1st Edition
    • Nicholas P. Cheremisinoff
    • English
    This handbook has been prepared as a working reference for the safety officer, the environmental engineer, and the consultant. For the safety officer, this handbook provides detailed guidelines and instructions in preparing Right-to-Know Reporting Audits, establishing programs and training employees on hazard awareness, and developing and implementing emergency response programs in the workplace and at off-site operations.For the environmental engineer, this handbook provides extensive technical data on toxic chemical properties and detailed instructional aid on how to properly prepare toxic chemical release inventory reporting.For the environmental consultant, an extensive overview of corrective action technologies is provided.

  • Plant Location Selection Techniques

    • 1st Edition
    • Edwin M. McPherson
    • English
    This book ties together history, legislation and economics to create an awareness of what chances an individual will have when he selects a location for a plant. Key costs are discussed including those mandated by the environment and by legislation. The impact of cultures, both past and present, upon the opportunity for economic success are reviewed. It is a ""How To"" and a ""Beware"" presentation of plant location, both domestic and international.The book is designed to provide chief executive officers, manufacturing vice presidents, chief engineers and engineers a checklist of things to do in analyzing a potential plant site. It is also designed to provide state and local industrial development staffs' guidance in their efforts to obtain industry. New entrepreneurs will find this book to be useful in making presentations to financial agencies.The do's and don'ts of plant location are dealt with from both the current and historical prospective. The impact of legislation upon manufacturing costs and thereby industry location is covered by both current and past examples.Examples of failed locations from both industry and site planners perspectives are provided. The book shows how to choose the best location in a country through arraying the basic economic and social facts in an orderly manner. Both tangible and intangible cost analysis and factor weighting are covered. Included are the impact of customs, legal systems, ways of doing business upon costs, management style and plant efficiency. Current legislation's potential impact upon plant location is evaluated. This review includes GATT, NAFT A, CBI and other international direct and indirect influences on markets and costs. Also the present and potential impact of OSHA, ADA, EPA and other national mandates is covered.

  • Flat-Panel Display Technologies

    Japan, Russia, Ukraine, and Belarus
    • 1st Edition
    • Lawrence Tannas Jr.
    • English
    Large scale manufacturing of liquid crystal flat panel displays (LCDs) by Japan brought the world's attention to the existence of an enormous market potential exists when there are alternatives to the cathode ray tube (CRT). The Japanese have recognized that new display technologies are critical to making their products highly competitive in the world market. The CRT is losing market share to the solid-state flat panel display. Japan currently holds 90% of the market, and this book outlines opportunities in the former Soviet Union, where companies with the necessary technology are seeking partners, investment, and manufacturing opportunities. Entire cities that were once not even on the map due to their military mission, are now appearing, filled with state-of-the-art electronic technology. The book is developed from the reports issued by investigators based on their field visits to 33 sites in Japan, and 26 sites in Russia, Ukraine, and Belarus.

  • Introduction to Electromagnetism

    • 1st Edition
    • M. Sibley
    • English
    Electromagnetics is one of the fundamental disciplines of electronic engineering. The author explains the development of field theory in relation to common electrical circuits and components, as opposed to just circuit theory, thus giving the reader a broader perspective of electrical circuits.Essentially in two parts, this book will help students to gain an appreciation of the physical effects of electrical and magnetic fields. The first part covers the basic theory of electrostatics, electromagnetism and electroconductive fields and applies the theory to different transmission lines. It culminates in a comparison of the basic relationships that lie behind all the field systems covered. The second part covers the physical effects of dielectrics and ferrous materials on capacitors and coils. It is truly introductory with very little prior knowledge assumed. The mathematical techniques required to manipulate the theory are introduced from basics and there are numerous worked examples and problems. Self-assessment questions are given at the end of each chapter to allow the student to check their understanding of material before moving onto further chapters. This is an accessible and self-contained introduction to a topic that all physical scientists and engineers must get to grips with before developing their knowledge further.

  • Structural and Stress Analysis

    • 1st Edition
    • T.H.G. Megson
    • English
    Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure. This text provides the student with a comprehensive introduction to all types of structural and stress analysis. Starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. It goes on to examine the different structures in which consideration of these is paramount, from simple pin joints to suspension cables. The properties of materials are outlined and all aspects of beam theory are examined in full. Finally the author discusses the key area of instability in structures.Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available.

  • Analysis, Design and Evaluation of Man-Machine Systems 1995

    • 1st Edition
    • T.B. Sheridan
    • English
    The series of IFAC Symposia on Analysis, Design and Evaluation of Man-Machine Systems provides the ideal forum for leading researchers and practitioners who work in the field to discuss and evaluate the latest research and developments. This publication contains the papers presented at the 6th IFAC Symposium in the series which was held in Cambridge, Massachusetts, USA.

  • Leak-Free Pumps and Compressors Handbook

    • 1st Edition
    • G. Vetter
    • English
    As environmental legislation concerning leaks and emissions tightens this practical reference manual is a must for all those involved with systems using leak-free (or seal-less) pumps or compressors. This handbook will enable you to understand the various designs and properties of leak-free pumps and select the right pump or compressor to ensure leak free systems whatever the application.

  • The Tribology Handbook

    • 2nd Edition
    • Michael J Neale
    • English
    The renowned reference work is a practical guide to the selection and design of the components of machines and to their lubrication. It has been completely revised for this second edition by leading experts in the area.

  • Pump Users Handbook

    • 4th Edition
    • R. Rayner
    • English
    This handbook places emphasis on the importance of correct interpretation of pumping requirements, both by the user and the supplier. Completely reworked to incorporate the very latest in pumping technology, this practical handbook will enable you to understand the principles of pumping, hydraulics and fluids and define the various criteria necessary for pump and ancillary selection. The Pump Users Handbook will prove an invaluable aid in ordering pump equipment and in the recognition of fundamental oprational problems.

  • Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena

    • 1st Edition
    • L.E. Murr + 2 more
    • English
    The proceedings of EXPLOMETâ„¢ '95, International Conference on Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena in Materials, was the fourth in the EXPLOMETâ„¢ quinquennial series begun in 1980. In the period since the last conference in 1990, significant world events have played a major role in the emphasis of topic areas. Shock consolidation continues to be an actively pursued research topic, but industrial applications have eluded it. Nonetheless, the pervasive theme of applications of shock wave and related high-strain-rate phenomena in a wide range of materials systems and processes remained a principal feature of this conference. Divided into eight sections, the book contains a total of 110 papers. Section I deals with dynamic consolidation of materials, while Section II covers dynamic fracture phenomena. Materials aspects of ballistic and hypervelocity impact and penetration are described in Section III, followed by a related treatment of extreme plastic deformation, including adiabatic shear bands, dynamic recrystallization, shaped charges, and explosively formed penetrator phenomena in Section IV. Modeling and simulation of shock-wave and high-strain-rate phenomena in materials is treated in Section V followed by shock-induced reactions and synthesis in Section VI, and shock wave modification materials structure and properties in Section VII. The final section (VIII) includes papers dealing generally with explosive welding, high-strain-rate deformation, and material working. This book, with emphasis on materials applications and effects, will provide a useful research update in the metallurgical materials applications of shock-wave and high-strain-rate phenomena, as well as a general reference tool and teaching component for specialized curricular dealing with dynamic effects in materials.

  • Current Advances in Mechanical Design and Production VI

    • 1st Edition
    • M.E. Elarabi + 1 more
    • English
    The International Conference on Mechanical Design and Production has been established since 1979 by the Department of Mechanical Design and Production at Cairo University. The conference MDP-6 held in Cairo, 2-4 January 1996, represents the 6th in the series. Its aim was to highlight the current advances in mechanical design and production, and to disseminate the latest developments from academic and industrial institutions in all related scientific disciplines. This publication includes a selection of papers submitted to the conference and reviewed by members of the scientific committee. The main areas of the papers include: materials processing and characterization constitutive modeling; simulation and analysis of manufacturing processes; numerical analysis of structures; fracture analysis; design and tribology; dynamics, control and robotics; and new trends in industrial and manufacturing engineering.

  • Water Hammer

    Practical Solutions
    • 1st Edition
    • Bruce Sharp + 1 more
    • English
    Water hammer, or the study of fluid transient behaviour, is one of the most common problems in the water engineering community. This book covers the many causes and solutions in a practical way and is an essential reference for all those concerned with the flow of liquids, not just water, in pipe systems. It follows on from the authors' previous monograph on the problems and solutions of water hammer and presents common problems in the form of case studies.This is an interesting and useful read for practising engineers working in this area and it will enable them to make comparisons with their own problems. Also the practical nature of the book makes it useful for civil engineering departmental libraries and departments where hydraulic design is taught.

  • Cobol for Students

    • 4th Edition
    • Andrew Parkin + 1 more
    • English
    COBOL for Students has established itself as one of the most successful teaching texts on COBOL programming and is now in its fourth edition. The first part of the book concentrates on the fundamentals of the language and takes students to the point where they can write modestly sized programs using sequential files. Part two assumes competence in elementary COBOL and explains design and other programming techniques which should be part of the professional programmer's repertoire. Part three extends the student's knowledge of the language by explaining some of the more advanced features of COBOL.Written for students learning COBOL for the first time, it takes the reader from the basic fundamentals right through to some of the more advanced features in one handy, and inexpensive volume. As many lecture courses have been based upon earlier editions of this book, this edition maintains the highly successful style and format and has been updated to include the 'Intrinsic Function Module for COBOL'. (This is the ANSI Standard X3.23a-1989 (COBOL 89) which has also been adopted as ISO International Standard 1989 Addendum 1 (an addendum to the ANSI Standard X3.23-1985 (COBOL 85)) and consists mainly of 42 predefined functions related to many different application areas).

  • Science for Motor Vehicle Engineers

    • 1st Edition
    • Peter Twigg
    • English
    The primary aim of this book is to provide the necessary scientific principles for NVQ students specialising in motor vehicle engineering at levels 2 and 3. Unlike many other engineering science texts, it emphasises the topics most useful to vehicle engineers, and includes numerous real-life examples, with questions directly related to cars, motor cycles and commercial vehicles.

  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 94
    • English
    Academic Press is pleased to announce the creation of Advances in Imaging and Electron Physics. This serial publication results from the merger of two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. Advances in Imaging & Electron Physics will feature extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies,microlithog... image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Advances in Heat Transfer

    Radiative Heat Transfer by the Monte Carlo Method
    • 1st Edition
    • Volume 27
    • English
    This book presents the basic principles and applications of radiative heat transfer used in energy, space, and geo-environmental engineering, and can serve as a reference book for engineers and scientists in researchand development. A PC disk containing software for numerical analyses by the Monte Carlo method is included to provide hands-on practice in analyzing actual radiative heat transfer problems.Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than journals or texts usually allow.

  • Modern CMOS Circuits Manual

    • 1st Edition
    • R M MARSTON
    • English
    This Circuits Manual examines operating principles and practical applications of modern medium-speed and 'fast' CMOS digital ICs. 470 carefully selected circuits, diagrams, graphs and tables are supported by the informative 'how to' text and by detailed descriptions of more than 120 modern CMOS ICs and their practical applications. Although ideal for practical design engineers and technicians, this book will doubtless also be of great interest to hobbyists and students of electronics.Using clear and comprehensive language, each chapter begins with an explanation of the basic principles of the subject followed by the presentation of circuits and useful data. The first chapter describes and explains digital IC basics, CMOS and TTL principles, the various CMOS sub-families and CMOS basic-usage rules. Chapter 2 gives a practical introduction to CMOS basics via the 4007UB IC, which can be used in both digital and linear applications. Chapter 3 deals with modern logic circuitry, and Chapter 4 with CMOS bilateral switches and data selectors. The next six chapters progress through waveform generator circuitry, clocked flip-flop and counter circuits, ICs, special counter/dividers, data latches, registers, comparators, and code converters. Chapter 11 focuses on specialised types of IC such as multiplexers and decoders while the final chapter presents a miscellaneous collection of useful CMOC circuits.

  • Introduction to Water Pollution Biology

    • 1st Edition
    • Richard J. Schmitz
    • English
    This textbook shows students how to examine a water pollution problem and methodically investigate and solve it. It is suitable for those who have a background in basic vertebrate and invertebrate zoology and botany.

  • Simplified Design of Micropower and Battery Circuits

    • 1st Edition
    • John Lenk
    • English
    Simplified Design of Micropower and Battery Circuits provides a simplified, step-by-step approach to micropower and supply cell circuit design. No previous experience in design is required to use the techniques described, thus making the book well suited for the beginner, student, or experimenter as well as the design professional. Simplified Design of Micropower and Battery Circuits concentrates on the use of commercial micropower ICs by discussing selections of external components that modify the IC-package characteristics. The basic approach is to start design problems with approximations for trial-value components in experimental circuits, then to vary the component values until the desired results are produced. Although theory and mathematics are kept to a minimum, operation of all circuits is described in full. EDITOR'S CHOICE - Electronics (The Maplin Magazine), May 1996 John D. Lenk has been a technical author specializing in practical electronic design and troubleshooting guides for more than 40 years. An established writer of international best-sellers in the field of electronics, Mr. Lenk is the author of more than 80 books on electronics, which together have sold well over two million copies in nine languages.

  • Toshiba Medium PLC Primer

    • 1st Edition
    • Edwin Dropka
    • English
    This Primer provides an introduction to programming with the EX-PDD250 software common to Toshiba Medium PLCs. If you are just starting to use Toshiba Medium PLCs, or are planning to switch to using them, this book will allow you to get acquainted with the specifics of the software quickly in a straightforward, step-by-step way. It can also be used as a general introduction to RLL and PLC programming.To supplement the text, the Toshiba demonstration disk included allows you to become familiar with basic techniques before you have to work on the real thing. The circuits in the book can be copied directly to your program, and modified to suit your needs.

  • Hydrostatically Loaded Structures

    The Structural Mechanics, Analysis and Design of Powered Submersibles
    • 1st Edition
    • W.A. Nash
    • English
    Powered submersibles have enabled the exploration of lake and ocean depths, and are used extensively for inspection of drilling rigs and offshore pipelines. Their potential for the discovery of undersea mineral resources is widely acknowledged.The design of such vehicles poses many problems not encountered with land-based systems: for example, normal pressures are very large, and many structural elements are extremely sensitive to initial geometric imperfections.Follow... a review of the history and development of submersibles, each chapter concentrates on a specific geometric design. The bibliography is unusually complete, and includes summaries of many referenced publications.This unique book covers all aspects of the structural mechanics, analysis and design of submersibles, and will be invaluable to ocean engineers, naval architects and graduate students entering the field.

  • Handbook of Microwave Technology

    • 1st Edition
    • T. Koryu Ishii
    • English
    The Handbook of Microwave Technology provides a reference resource for professionals in business and industry as well as science and engineering students. A compact, concise reference, the Volumes contain focused chapters complete with useful formulas, charts, graphs, tables, examples, and diagrams that are clearly explained and easily applicable to practical cases.Volume I: Components and Devices provides a comprehensive overview of the components and devices used in microwave circuits, including microwave transmission lines, resonators, filters, ferrite devices, solid state devices, transistor oscillators and amplifiers, directional couplers, microstripline components, microwave detectors, mixers, converters and harmonic generators, and microwave solid-state switches, phase shifters and attenuators.Volume II: Applications discusses consumer, industrial, biomedical, and chemical applications of microwave technology. It also covers microwave instrumentation and measurement, thermodynamics, and applications in navigation, law enforcement, and radio communication.

  • Handbook of Microwave Technology

    • 1st Edition
    • Volume 2
    • T. Koryu Ishii
    • English

Related subjects