Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • New Approaches to the Design and Economics of EHV Transmission Plant

    International Series of Monographs in Electrical Engineering
    • 1st Edition
    • Brian Jones
    • D. J. Silverleaf
    • English
    New Approaches to the Design and Economics of EHV Transmission Plant examines the limitations of EHV transmission plant. Analysis is also covered in the book to correct these limitations. The concept behind EHV is that allowable transfer of electricity is related to the square of the voltage. Factors such as the expense of supplying a certain volume of electricity over a given distance and creations of power stations are examined. The book provides economic studies of alternative design policies based on estimation of costs and benefits of the design parameters. The text also focuses on the principles essential to the design of plant and to highlight areas where expenses originate. The book then discusses the electrical supply. Economic principles, the electrical design, and thermal limitations of electrical plant are also covered. The text can provide valuable insights to electrical engineers, mechanical engineers, economists, plant architects, students, and researchers on the field of electrical plant planning and design.

  • Control Applications of Nonlinear Programming and Optimization

    Proceedings of the Fifth IFAC Workshop, Capri, Italy, 11-14 June 1985
    • 1st Edition
    • G. Di Pillo
    • English
    Control Applications of Nonlinear Programming and Optimization presents the proceedings of the Fifth IFAC Workshop held in Capri, Italy on June 11-14, 1985. The book covers various aspects of the optimization of control systems and of the numerical solution of optimization problems. The text also discusses specific applications concerned with the optimization of aircraft trajectories, of mineral and metallurgical processes, of wind tunnels, and of nuclear reactors. The book also considers computer-aided design of control systems. The book is useful to mathematicians, engineers, and computer engineers.

  • Heating and Cooling Load Calculations

    International Series of Monographs In: Heating, Ventilation and Refrigeration
    • 1st Edition
    • P. G. Down
    • N. S. Billington + 1 more
    • English
    Heating and Cooling Load Calculations is a handbook that covers various concerns in calculating heating and cooling. The title provides a logical study of the physical and engineering factors that affect the heating and cooling load. The coverage of the text includes heat transfer; heating loads and its reduction; and design temperature conditions. The text also covers the cooling design conditions and the components of cooling load and its reduction. The book will be of great use to both student and professional engineers.

  • Engineering Field Theory

    The Commonwealth and International Library: Applied Electricity and Electronics Division
    • 1st Edition
    • Ä„. J. Baden Fuller
    • P. Hammon
    • English
    Engineering Field Theory focuses on the applications of field theory in gravitation, electrostatics, magnetism, electric current flow, conductive heat transfer, fluid flow, and seepage. The manuscript first ponders on electric flux, electrical materials, and flux function. Discussions focus on field intensity at the surface of a conductor, force on a charged surface, atomic properties, doublet and uniform field, flux tube and flux line, line charge and line sink, field of a surface charge, field intensity, flux density, permittivity, and Coulomb's law. The text then takes a look at gravitation and fluid flow, magnetic flux, and electric potential. Topics include capacitance with mixed dielectric, capacitance, potential function, electric intensity, magnetization, field intensity, current loop and magnetic dipole, magnetic field of an electric current, velocity, pressure, gravitational field intensity, and gravitational constant. The book ponders on experimental techniques, numerical methods, and electromagnetic induction, including Hall effect, magnetic energy, method of construction, computer techniques, and space diagram. The publication is a highly recommended source material for engineers and researchers wanting to study further engineering field theory.

  • Child Psychiatry Observed

    A Guide for Social Workers
    • 1st Edition
    • Elizabeth Gore
    • English
    Child Psychiatry Observed: A Guide for Social Workers is based on the experience of a clinical child psychiatrist, who aims to give an overview of child psychiatry. The book first presents various psychological disturbances as well as its causes. This topic emphasizes the development of psychological disturbances among children since birth, which then develop over time as the child faces various experiences and special cases, such as divorce of the parents, harassment, and separation from the parents. Then, the book gives ideas how to treat a child identified as patient in a clinic, and how the society can help in providing facilities that could help the child recover. The latter part gives an insight into the future of child psychiatry. The text will be invaluable to counselors, child psychiatrists, psychologists, and practitioners in related fields. Parents and students will also benefit from the book.

  • Structural Analysis Systems

    Software — Hardware Capability — Compatibility — Applications
    • 1st Edition
    • A. Niku-Lari
    • English
    Structural Analysis Systems: Software—Hardware Capability—Compatibi... Volume 3 is a practical guidebook on structural analysis systems and their applications. It provides detailed information about a specific software, its postprocessor capabilities and limitations, computer-aided design connection, and compatibility with the most common computers. Several practical examples from industry with computer and user cost are given. This volume consists of 20 chapters and begins with a description of ALSA, a general purpose finite element computer program for accurate large order structural analysis. The discussion then turns to BEFE, a general purpose program for the static analysis of structures and solids using the finite element method, the boundary element method, or a combination of the two. The following chapters focus on other computer programs such as BEWAVE, CASTEM, FEMFAM, FEMPAC, and OSTIN for applications ranging from finite element analysis to seismic analysis. This book will be a useful resource for practitioners in scientific and industrial disciplines such as mechanical or civil engineering, informatics, applied mathematics, and computer science.

  • Introduction to Crop Husbandry

    (Including Grassland)
    • 5th Edition
    • J. A. R. Lockhart + 1 more
    • English
    Introduction to Crop Husbandry, Fifth Edition presents major revisions, discussing more updated information on the science and practice of crop husbandry, including grassland, compared with those topics presented in the previous edition. This book aims to cater the need of students for a reference material that presents practical, simplified, and easily understandable studies on the subject. Specifically, this text discusses growth and development of plants, drainage and irrigation, types and management of soils, modern practices of growing and harvesting crops, and management of grassland. This introductory book also includes topics on conservation; usual life cycles of common pests and illnesses; and the developments in the use of chemicals as fertilizers and in the control of weeds, pests, and diseases. This text will be very invaluable to students of agriculture, crop husbandry, and related fields.

  • Mechanical Technology for Higher Engineering Technicians

    • 1st Edition
    • Peter Black
    • English
    Mechanical Technology for Higher Engineering Technicians deals with the mechanics of machines, thermodynamics, and mechanics of fluids. This book presents discussions and examples that deal with the strength of materials, technology of machines, and techniques used by professional engineers. The book explains the strain energy of torsion, coil springs, and the effects of axial load. The author also discusses the forces that produce bending, shearing, and bending combined with direct stress, as well as beams subjected to a uniform bending moment or simply supported beams with concentrated non-central load. The author explains the equations to determine force in shear stress resulting from a tensile load or how to determine maximum shear stress. He explains Poisson's Ratio, the Mohr Circle, and the theories of Coulomb, Tresca, and Guest. He discusses fluid mechanics, combustion, heat transfer, and troboengineering. He points out that friction between two surfaces causes heat: to avoid the rise in temperature, the two surfaces can be 1) separated with the use of lubricants or bearings, or 2) use of low friction materials. He also discusses the equations used for proportional control, derivative control, and integral control. This book is intended for candidates at the HNC in Mechanical Engineering for qualification as engineering technicians.

  • Fundamental Principles of Engineering Nanometrology

    • 2nd Edition
    • Richard Leach
    • English
    Working at the nano-scale demands an understanding of the high-precision measurement techniques that make nanotechnology and advanced manufacturing possible. Richard Leach introduces these techniques to a broad audience of engineers and scientists involved in nanotechnology and manufacturing applications and research. He also provides a routemap and toolkit for metrologists engaging with the rigor of measurement and data analysis at the nano-scale. Starting from the fundamentals of precision measurement, the author progresses into different measurement and characterization techniques. The focus on nanometrology in engineering contexts makes this book an essential guide for the emerging nanomanufacturing / nanofabrication sector, where measurement and standardization requirements are paramount both in product specification and quality assurance. This book provides engineers and scientists with the methods and understanding needed to design and produce high-performance, long-lived products while ensuring that compliance and public health requirements are met. Updated to cover new and emerging technologies, and recent developments in standards and regulatory frameworks, this second edition includes many new sections, e.g. new technologies in scanning probe and e-beam microscopy, recent developments in interferometry and advances in co-ordinate metrology.

  • Accounting for Price-Level Changes—Theory and Procedures

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • R. S. Gynther
    • English
    Accounting for Price-Level Changes: Theory and Procedures shows the importance of taking actions to incorporate the effects of changing prices into each firm’s accounting systems, and encourage the firms to treat this incorporation as a normal routine. This book shows that prices have in fact been altering over the years, and then explains the problems of changing prices as they affect accounting. Then, this text demonstrates these problems with the aid of a few simple examples. This book also includes statements of professional bodies and proposals that have been advocated. The latter part focuses on other accounting methods and concepts, complemented with illustrative examples. This book will be beneficial to accounting practitioners and those working at business firms.

  • The Common Sense of Singing

    The Commonwealth and International Library of Science, Technology, Engineering and Liberal Studies: Music Division
    • 1st Edition
    • George Baker
    • K. A. Wright
    • English
    The Common Sense of Singing is a nine-chapter text that serves as man?s guide to the career of singing. After a brief presentation of the technical aspects of singing, this book goes on discussing the different contributing factors in singing, including breathing, articulation, tone-color, technique, and style. The subsequent chapters deal with oratorio and opera singing. The remaining chapters consider the mechanical reproductions of the human voice through microphone. This book is intended primarily to musicians.

  • An Introduction to Timber Engineering

    Pergamon Series of Monographs on Furniture and Timber
    • 1st Edition
    • H. J. Andrews
    • Jack Kape
    • English
    Pergamon Series of Monographs on Furniture and Timber, Volume 10: An Introduction to Timber Engineering presents in readable form an understanding of timber engineering, which covers important aspects of the building industry particularly in the field of prefabrication. The chapters of this book present a good understanding of the many integrated divisions of the industry involved in timber engineering. The examples provided on design indicate the method of adapting normal structural analysis for use with timber and joint forms. Most of the information specified in this volume are British practices, but reference to other European and North American developments are also included to provide a fuller understanding of the industry as a whole and need for local variations to suit climatic conditions and raw material supplies. Some of the topics discussed include the timber engineering developments in Europe and North America; timber as a structural material; structural timber forms; mechanical joints; design of columns and struts; and preservation of timber from decay. This publication is a useful reference to building and engineering students.

  • Engineering Drawing from the Beginning

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1st Edition
    • M. F. Cousins
    • N. Hiller + 1 more
    • English
    Engineering Drawing: From the Beginning, Volume 1 discusses the basic concepts in engineering drawing. The book illustrates the drawings presented in both first angle (English) projection and third angle (American) projection. The opening chapter discusses the equipment utilized in engineering drawing, and then proceeds to discussing the concepts and methods in engineering drawing. The coverage of the text includes geometrical constructions, projection, and dimensioning. The book will be of great interest to anyone who wants to get acquainted with the basics of engineering drawing.

  • Heat Transfer in Structures

    International Series of Monographs in Aeronautics and Astronautics
    • 1st Edition
    • H. Schuh
    • R. L. Bisplinghoff + 1 more
    • English
    Heat Transfer in Structures discusses the heat flow problems directly related to structures. A large section of the book presents the heat conduction in solids. The fundamentals of the analytical method are covered briefly, while introduction on the use of semi-analytical methods is treated in detail. Various approximate methods and finite difference methods are fully explained. The description of structural elements is dealt with extensively. The subject of analogues for finding temperature distributions are briefly discussed, while similarity laws and model testing are covered more comprehensively. Another topic of interest is the heat flow inside the solid part of an ablating body which is covered in detail. Thermal conductance across interfaces and joints are analyzed. And a thorough discussion of the steady heat flow is provided. A section of the text covers the simple structural elements. The book will provide useful information to aeronautics, astronautics, mechanics, engineers, and students of the physical sciences.

  • Control of Distributed Parameter Systems 1982

    Proceedings of the Third IFAC Symposium, Toulouse, France, 29 June - 2 July 1982
    • 1st Edition
    • Jean-Pierre Babary + 1 more
    • English
    Control of Distributed Parameter Systems 1982 covers the proceeding of the Third International Federation of Automatic Control (IFAC) Symposium on Control of Distributed Parameter Systems. The book reviews papers that tackle issues concerning the control of distributed parameter systems, such as modeling, identification, estimation, stabilization, optimization, and energy system. The topics that the book tackles include notes on optimal and estimation result of nonlinear systems; approximation of the parameter identification problem in distributed parameters systems; and optimal control of a punctually located heat source. This text also encompasses the stabilization of nonlinear parabolic equations and the decoupling approach to the control of large spaceborne antenna systems. Stability of Hilbert space contraction semigroups and the tracking problem in the fractional representation approach are also discussed. This book will be of great interest to researchers and professionals whose work concerns automated control systems.

  • Kinetics of Chemical Processes

    Butterworth-Heinemann Series in Chemical Engineering
    • 1st Edition
    • Michel Boudart
    • Howard Brenner
    • English
    Kinetics of Chemical Processes details the concepts associated with the kinetic study of the chemical processes. The book is comprised of 10 chapters that present information relevant to applied research. The text first covers the elementary chemical kinetics of elementary steps, and then proceeds to discussing catalysis. The next chapter tackles simplified kinetics of sequences at the steady state. Chapter 5 deals with coupled sequences in reaction networks, while Chapter 6 talks about autocatalysis and inhibition. The seventh chapter describes the irreducible transport phenomena in chemical kinetics. The next two chapters discuss the correlations in homogenous kinetics and heterogeneous catalysis, respectively. The last chapter covers the analysis of reaction networks. The book will be of great use to students, researchers, and practitioners of scientific disciplines that deal with chemical reaction, particularly chemistry and chemical engineering.

  • Cargo Handling and the Modern Port

    The Commonwealth and International Library of Science Technology Engineering and Liberal Studies
    • 1st Edition
    • R. B. Oram
    • N. Skene Smith
    • English
    Cargo Handling and the Modern Port covers various concerns in the handling of goods in a contemporary port. The book also details the functions of ports, along with the impact of the silent revolutions that took place in the major ports around the world. The text first covers the port itself, such as its functions, the types of port managements, and administration. Next, the book discusses the basics of operating a port, and then proceeds to tackling port labor. Chapter 4 details the various changes that took place in the major ports throughout the world after 1945. The next series of chapters deals with various concerns in cargo, such as unit load, containers, and bulk cargos. The last chapter of the text discusses the ports of the future. The book will be of great use to individuals involved in logistics, forwarding, and ship transportation industries.

  • Basic Theory of Structures

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1st Edition
    • J. S. C. Browne
    • N. Hiller + 1 more
    • English
    Basic Theory of Structures provides a sound foundation of structural theory. This book presents the fundamental concepts of structural behavior. Organized into 12 chapters, this book begins with an overview of the essential requirement of any structure to resist a variety of loadings without changing its shape. This text then examines the application of the laws of statics to structures as a means of determining the external reactions induced at supports due to loading. Other chapters consider the dependence of stress components on the choice of reference plane. This book discusses as well the method of determining the internal forces in the bars of a truss, which depends upon applying the conditions of equilibrium. The final chapter deals with the variety of factors affecting the strength of concrete. This book is intended to be suitable for civil engineering students. Design and civil engineers will also find this book extremely useful.

  • High-Power Electronics

    Volume 2
    • 1st Edition
    • P. L. Kapitza + 1 more
    • English
    High-Power Electronics, Volume 2 presents the electronic processes in devices of the magnetron type and electromagnetic oscillations in different systems. This book explores the problems of electronic energetics. Organized into 11 chapters, this volume begins with an overview of the motion of electrons in a flat model of the magnetron, taking into account the in-phase wave and the reverse wave. This text then examines the processes of transmission of electromagnetic waves of various polarization and the wave reflection from grids made of periodically distributed infinite metal conductors. Other chapters consider the parameters involved in the boundary conditions of the grid. This book discusses as well the spectrum of natural oscillations of closed resonant systems having azimuthal periodicity. The final chapter deals with dosimeters applied in the laboratory for use with generators of decimeter waves. This book is a valuable resource for scientific workers and engineers involved in superhigh-frequency electronics and bordering problems.

  • Laplace Transforms for Electronic Engineers

    International Series of Monographs on Electronics and Instrumentation
    • 2nd Edition
    • James G. Holbrook
    • D. W. Fry + 1 more
    • English
    Laplace Transforms for Electronic Engineers, Second (Revised) Edition details the theoretical concepts and practical application of Laplace transformation in the context of electrical engineering. The title is comprised of 10 chapters that cover the whole spectrum of Laplace transform theory that includes advancement, concepts, methods, logic, and application. The book first covers the functions of a complex variable, and then proceeds to tackling the Fourier series and integral, the Laplace transformation, and the inverse Laplace transformation. The next chapter details the Laplace transform theorems. The subsequent chapters talk about the various applications of the Laplace transform theories, such as network analysis, transforms of special waveshapes and pulses, electronic filters, and other specialized applications. The text will be of great interest to electrical engineers and technicians.

  • High Sensitivity Counting Techniques

    International Series of Monographs on Electronics and Instrumentation
    • 1st Edition
    • D. E. Watt + 1 more
    • D. W. Fry + 1 more
    • English
    International Series of Monographs on Electronics and Instrumentation, Volume 20: High Sensitivity Counting Techniques details the low background counting techniques for radiation detection. The book covers various areas of concerns in utilizing low background counting technique. The text first details the counting parameters, and then proceeds to discussing the attainment of low backgrounds in radiation detectors. Next, the selection deals with low background laboratories. The remaining chapters cover various quantification methods such as carbon-14 beta counting; counting of soft radiations using internal sources; and measurement of gamma radioactivity from the body. The book will be of great interest to scientists, engineers, and technicians involved in atomic energy projects.

  • Public Cleansing

    Refuse Disposal
    • 1st Edition
    • F. L. Stirrup
    • J. R. D. Francis
    • English
    Public Cleansing: Refuse Disposal focuses on the disposal of refuse, as it is the most complex of the problems affecting authorities responsible for public cleansing activities. This text first analyzes domestic refuse and discusses assessing disposal methods. This book then explains tipping operations, transfer loading stations, and pulverization and grinding. The science of composting, the advantages of incineration, and the methods of salvage and utilization are also tackled. This book concludes by explaining the other disposal systems and the disposal of trade wastes. This publication will be invaluable to authorities and industries primarily concerned with refuse disposal.

  • Introduction to the Theory of Flow Machines

    • 1st Edition
    • Albert Betz
    • English
    Introduction to the Theory of Flow Machines details the fundamental processes and the relations that have a significant influence in the operating mechanism of flow machines. The book first covers the general consideration in flow machines, such as pressure, stress, and cavitation. In the second chapter, the text deals with ducts; this chapter discusses the general remarks, types of flow, and mixing process. Next, the book tackles the types of cascades, along with its concerns. The closing chapter covers the flow machine and its components, such as turbine, wheels, engines, and propellers. The text will be of great use to mechanical engineers and technicians.

  • Materials Technology in Steam Reforming Processes

    Proceedings of the Materials Technology Symposium Held on October 21-22, 1964, Organised by the Agricultural Division, Imperial Chemical Industries Ltd.
    • 1st Edition
    • C. Edeleanu
    • English
    Materials Technology in Steam Reforming Processes is a collection of papers that covers advancement in the various areas of studies in steam reforming processes. The title presents the studies of authors who are involved in the development of a particular process. The coverage of the text includes the fundamental aspects of the creep deformation of metals; factors affecting choice of materials and design of units for pressure steam reforming; and the research background of the thermalloy grades of chromium-nickel-iron heat-resisting alloys. The selection also covers corrosion problems on finned air-cooled heat exchanger tubing; and thermal insulation for steam-reforming plants. The book will be of great use to scientists, engineers, and technicians involved in materials science.

  • Solid Circuits and Microminiaturization

    Proceedings of the Conference Held at West Ham College of Technology, June, 1963.
    • 1st Edition
    • G. W. A. Dummer
    • English
    Solid Circuits and Microminiaturization is a collection of the proceedings of the Conference on Solid Circuits and Microminiaturization held at West Ham College of Technology in the UK in June 1963. The conference provided a forum for discussing trends in the microminiaturization of solid circuits and covered a wide range of topics related to the subject, including the design and manufacture of solid circuits; solid circuit fabrication techniques and the resulting passive component characteristics; and equipment design philosophy using integrated circuits. This book is comprised of 27 chapters and begins with an overview of the status and trends in microminiaturization... followed by a description of the techniques used to fabricate solid state circuits and a comparison of the properties of various types of solid state circuits. Subsequent chapters focus on the approaches used in the design and manufacture of solid circuits; characteristics and application of micrologic elements; techniques for the use of solid circuits together with conventional components in miniaturized assemblies; and the application of solid state circuits to computer design. High-speed integrated digital circuits and a group of integrated circuits for linear amplification are also described. This monograph will be of particular value to electronics engineers and systems designers.

  • Computer Aided Design of Multivariable Technological Systems

    Proceedings of the Second IFAC Symposium West Lafayette, Indiana, USA, 15-17 September 1982
    • 1st Edition
    • G. G. Leininger
    • English
    Computer Aided Design of Multivariable Technological Systems covers the proceedings of the Second International Federation of Automatic Control (IFAC). The book reviews papers that discuss topics about the use of Computer Aided Design (CAD) in designing multivariable system, such as theoretical issues, applications, and implementations. The book tackles several topics relevant to the use of CAD in designing multivariable systems. Topics include quasi-classical approach to multivariable feedback system designs; fuzzy control for multivariable systems; root loci with multiple gain parameters; multivariable frequency domain stability criteria; and computational algorithms for pole assignment in linear multivariable systems. The text will be of great use to professionals whose work involves designing and implementing multivariable systems.

  • Measurements for Stresses in Machine Components

    • 1st Edition
    • V. F. Yakovlev + 1 more
    • English
    Measurements for Stresses in Machine Components focuses on the state of stress and strain of components and members, which determines the service life and strength of machines and structures. This book is divided into four chapters. Chapter I describes the physical basis of several methods of measuring strains, which includes strain gauges, photoelasticity, X-ray diffraction, brittle coatings, and dividing grids. The basic concepts of the electric strain gauge method for measuring stresses inside machine components are covered in Chapter II. Chapter III elaborates on the results of experimental work on stresses and strains in linear, plane, and three-dimensional states of stress under static load conditions. The last chapter is devoted to examples for experimental stress analysis of plane and three-dimensional states of stresses under dynamic loads. Conclusions drawn from the theoretical and experimental investigations discussed in this text are provided at the end. This publication is intended for engineers and technicians, but is also a good reference for students researching on the stress or strains of machine components.

  • Excitation Control

    International Series of Monographs on Electronics and Instrumentation
    • 1st Edition
    • G. M. Ulanov
    • D. W. Fry + 1 more
    • English
    Excitation Control is a translation from the Russian and deals with the principles of control related to the use of excitation as a controlling or regulating effect. This book discusses the research made on different ways to control various objects through automatic regulation, and the laws or principles behind any of these developments. The text focuses on the controls associated with the principle of excitation (invariance) regulation, as well as, the relevant methods and procedures of measurement, transmission or conversion of information in control and regulation systems. The book describes the principal types of automatic control systems and measuring devices that operate on excitation. The author also explains the elements of the theory of automatic control systems that operate on excitation such as the conditions of absolute invariance and the realizability of these conditions. The book then presents examples of calculations concerning combined tracing systems and automatic control systems. This book can prove useful for mathematicians, students, and professor advanced mathematics or physics. Engineers or technicians interested in automatic control and regulation will find this book valuable.

  • Computing Methods

    Adiwes International Series in the Engineering Sciences
    • 1st Edition
    • I. S. Berezin + 1 more
    • English
    Computing Methods, Volume I generalizes and details the methods involved in computer mathematics. The book has been developed in two volumes; Volume I contains Chapters 1 to 5, and Volume II encompasses Chapters 6 to 10. The first chapter in this volume deals with operation on approximate quantities, while the second chapter talks about the theory of interpolation and certain applications. Chapter 3 covers numerical differentiation and integration. The last two chapters discuss approximation and least square approximations. The text will be of great interest to college students majoring in mathematics or computer science.

  • HVAC Engineer's Handbook

    • 9th Edition
    • F. Porges
    • English
    Hydraulics and Fluid Mechanics covers the proceedings of the First Australasian Conference. The book presents 29 papers that tackle several areas of concerns in fluid flow. The coverage of the text includes the behavioral aspects of fluid flow such as pressure drop and surge, gas pulsation, and cavitation. The book also discusses materials that cover methods in analyzing and estimating fluid flow variables, such as waterhammer analysis with nonlinear frictional resistance; estimation of hold-up at and below flooding; and analysis of shallow water wave patterns produced by a traveling model with straight and circular courses. The text will be of great use to researchers and professionals whose work concerns fluid flow.

  • Fatigue Design Procedures

    Proceedings of the 4th Symposium of the International Committee on Aeronautical Fatigue held in Munich, 16–18 June 1965
    • 1st Edition
    • E. Gassner + 1 more
    • English
    Fatigue Design Procedures presents the full text of the papers presented at the 4th Symposium of the International Committee on Aeronautical Fatigue held in Munich, Germany on June 16-18, 1965, and summaries of the discussion held about them. The papers featured in the volume covers different aspects of fatigue design. These include fail-safe design for a jet transport airplane, the weapon systems fatigue certification program of the U.S. Air Force, the role of variable amplitude or constant amplitude tests in design studies, the evaluation of allowable design stress and corresponding fatigue life, and the importance of fatigue design testing. This book will be of interest to persons dealing with studies on fatigue design methods.

  • Hydraulics and Fluid Mechanics

    Proceedings of the First Australasian Conference Held at the University of Western Australia, 6th to 13th December 1962
    • 1st Edition
    • Richard Silvester
    • English
    Hydraulics and Fluid Mechanics is a collection of papers from the Proceedings of the First Australian Conference held at the University of Western Australia on December 6-13, 1962 at Nedlands, Australia. This book deals with the science of hydraulics and fluid mechanics in their practical uses in industry and research. In special situations when high-pressure oil is used in mechanical equipment, hydraulic lock is preferred for valve control. This book reviews the pressure drop in the pneumatic transfer of granular solids in a pipe where a formula is derived to determine the pressure drop when using either a straight or bent pipe. This text also discusses the improvements on the cavitation performance of flow pumps by using prerotation at design points. The construction of a dam in Tasmania provides another study on the behavior of rock-fill slopes subjected to seepage. Here, the book analyzes the hydraulic forces acting on the rock particles, and explains theories on the derivation of the dynamic equation for spatially varied flow with increasing discharge on a steep slope. The book also examines the concept of critical depth in spatially varied flow with increasing discharge on a steep slope. This book investigates the use of a computer model designed to determine the methods of draining flooded farmlands either through hydraulically or electrically operated drainage systems. This text also evaluates the cost of constructing a project. This collection is suitable for people in the field of applied mathematics, physics, and engineering.

  • Theory of Elastic Thin Shells

    Solid and Structural Mechanics
    • 1st Edition
    • A. L. Gol'Denveizer
    • Th. Von Kármán + 1 more
    • English
    Theory of Elastic Thin Shells discusses the mathematical foundations of shell theory and the approximate methods of solution. The present volume was originally published in Russian in 1953, and remains the only text which formulates as completely as possible the different sets of basic equations and various approximate methods of shell analysis emphasizing asymptotic integration. The book is organized into five parts. Part I presents the general formulation and equations of the theory of shells, which are based on the well-known hypothesis of the preservation of the normal element. Part II is devoted to the membrane theory--the most widely used approximate method of analysis of shells that was formulated at approximately the same time as the more general bending theory. In Part III methods of analysis of circular cylindrical shells with the aid of trigonometric series are considered. Part IV is essentially mathematical in character and its purpose is to justify the approximate methods of shell analysis. In Part V approximate methods of analysis of shells are formulated.

  • The Promotion of the Relationship between Research and Industry in Mechanical Production

    International Institution for Production Engineering Research
    • 1st Edition
    • O. Kienzle + 2 more
    • English
    The Promotion of the Relationship between Research and Industry in Mechanical Production presents the rapid transformation of mechanical production, which calls for intensified relations between research and industry. This book provides the practical ways of cooperation between research and industry with regard to automation. Organized into seven chapters, this book begins with an overview of the attitude towards research and application. This text then examines the bottle-necks that impede good collaboration. Other chapters consider the ways and means that produce a common understanding of the problems concerned between industrial production and production research. This book discusses as well how the introduction of an innovation can affect the cycle of operations of the old process, in terms of time, place, or persons involved. The final chapter deals with the scientific basis of the need to improve production methods throughout the world. This book is a valuable resource for production engineers, production managers, industrial managers, and research workers.

  • How Designers Think

    The Design Process Demystified
    • 2nd Edition
    • Bryan Lawson
    • English
    How Designers Think: The Designing Process Demystified, Second Edition provides a comprehensive discussion of the psychology of the design process. The book is comprised of 15 chapters that are organized into three parts. The text first discusses the fundamentals of the concept of designer, designing, and design. The second part deals with design problems, including its components, model, and solutions. The last part covers the cognitive aspect of designing; the coverage of this part includes the philosophes, strategies, and tactics of design. The book will be of great interest to both students and instructors of architecture, planning, and industrial and interior design.

  • Failure Analysis in Engineering Applications

    • 1st Edition
    • Shin-Ichi Nishida
    • English
    Failure Analysis in Engineering Applications deals with equipment and machine design together with examples of failures and countermeasures to avoid such failures. This book analyzes failures in facilities or structures and the ways to prevent them from happening in the future. The author describes conventional terms associated with failure or states of failure including the strength of materials, as well as the procedure in failure analysis (materials used, design stress, service conditions, simulation, examination of results). The author also describes the mechanism of fatigue failure and prediction methods to estimate the remaining life of affected structures. The author cites some precautions to be followed in actual failure analysis such as detailed observation on the fracture site, removal of surface deposits (for example, rusts) without altering the fracture size or shape, The book gives examples of analysis of failure involving a crane head sheave hanger, wire rope, transmission shaft, environmental failure of fastening screws, and failures in rail joints. This book is intended for civil and industrial engineers, for technical designers or engineers involved in the maintenance of equipment, machineries, and structures.

  • Advances in Aeronautical Sciences

    Proceedings of the Second International Congress in the Aeronautical Sciences, Zürich, 12-16 September 1960
    • 1st Edition
    • Th. Von Kármán + 2 more
    • English
    Advances in Aeronautical Sciences, Volume 3 contains the proceedings of the Second International Congress in the Aeronautical Sciences held in Zurich, Switzerland, on September 12-16, 1960. The papers explore advances in aeronautical sciences and cover topics ranging from the role of entropy in the aerospace sciences to the theory of hypersonic flow over blunt-nosed slender bodies. The effect of boundary layer transition at the leading edge of thin wings on general nose separation is also discussed, along with the aerodynamics of aircraft shapes for flight at supersonic speeds. This book is comprised of 28 chapters and begins with a review of the importance of entropy in the aerospace sciences, citing the work of Nicolaus Sadi Carnot and Rudolf Clausius as well as enthalpy and free enthalpy. The link between entropy and molecular theory is also described before turning to the physics of jet streams and the aerodynamics of jet flaps. Other chapters consider a wide range of problems both of theoretical and practical importance, including the flow around a circular cylinder; the theory of boundary layer; the physics of transition from laminar to turbulent flow; and the theory and experimental knowledge of transonic, supersonic, and hypersonic flows. Due attention is given to the re-entry of missiles and space vehicles into the atmosphere; problems of trajectories; guidance of space vehicles; and power generation in space. The economic and technical aspects of air transportation are also highlighted. This volume will be of interest to scientists and engineers in aeronautics and astronautics.

  • Engineering Drawing from the Beginning

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1st Edition
    • M. F. Cousins
    • N. Hiller
    • English
    Engineering Drawing from the Beginning, Volume 2 discusses the methods for communicating technical engineering concepts through illustrations and drawings. This volume covers the more advance techniques in engineering drawing. The coverage of the text includes the helix, which is the path traced by a point moving uniformly around the surface of a right cylinder that is moving axially. The book also covers drawings of solid objects such as prisms, pyramids, and cones, along with hollow objects made from sheet material. In Chapter 5, the text presents the conventional representations of common features. The sixth chapter deals with all forms of fastenings, while the seventh chapter talks about metrication in the drawing office. The last chapter details the working drawings of assemblies and parts taken from those assemblies. The text will be most useful to students and professional engineers, as both learning material and reference source.

  • TV & Video Engineer's Reference Book

    • 1st Edition
    • K G Jackson + 1 more
    • English
    TV & Video Engineer’s Reference Book presents an extensive examination of the basic television standards and broadcasting spectrum. It discusses the fundamental concepts in analogue and digital circuit theory. It addresses studies in the engineering mathematics, formulas, and calculations. Some of the topics covered in the book are the conductors and insulators, passive components, alternating current circuits; broadcast transmission; radio frequency propagation; electron optics in cathode ray tube; color encoding and decoding systems; television transmitters; and remote supervision of unattended transmitters. The definition and description of diagnostics in computer controlled equipment are fully covered. In-depth accounts of the microwave radio relay systems are provided. The general characteristics of studio lighting and control are completely presented. A chapter is devoted to video tape recording. Another section focuses on the mixers and special effects generators. The book can provide useful information to technicians, engineers, students, and researchers.

  • A Course of Mathematics for Engineers and Scientists

    Volume 3: Theoretical Mechanics
    • 1st Edition
    • Brian H. Chirgwin + 1 more
    • English
    A Course of Mathematics for Engineers and Scientists, Volume 3: Theoretical Mechanics details the fundamentals concepts of theoretical mechanics. The title first covers the foundations of mechanics, and then proceeds to tackling plane statics and virtual work. Next, the selection talks about continuously distributed forces. The text also deals with kinematics, along with particle dynamics. Chapter VII covers systems of particles, while Chapter VIII tackles the uniplanar motion of a rigid body. The ninth chapter discusses stability, and the last chapter details impulsive motion and variable mass. The book will be of great use to students of engineering and pure and applied mathematics.

  • The Inflammatory Process

    Volume 2
    • 2nd Edition
    • Benjamin W. Zweifach + 2 more
    • English
    The Inflammatory Process, Second Edition is an account of the inflammatory process and covers topics ranging from microvascular aspects of tissue injury and capillary permeability to rheologic factors in inflammation. The effects of inflammation on the lymphatic system are also explored, along with the sticking and emigration of white blood cells in inflammation. Comprised of 11 chapters, this volume begins with an overview of vascular events in the inflammatory process, paying particular attention to the microvascular aspects of tissue injury and structural and physiological considerations in capillary permeability. The rheology of inflammation and the effects of inflammation on the lymphatic system are also examined. Subsequent chapters focus on the natural role of amines, polypeptides, and proteases in the inflammatory process; mediation of increased vascular permeability in inflammation; and hemostatic mechanisms in tissue injury. The book concludes with an analysis of thrombosis as an initiator of inflammation and as a complication of inflammation, and how it can be prevented. This monograph will be of interest to practitioners in fields ranging from biochemistry to pathology, bacteriology, physiology, and immunology.

  • The Study of Metal Structures and Their Mechanical Properties

    Pergamon Unified Engineering Series
    • 1st Edition
    • W. A. Wood
    • William F. Hughes + 2 more
    • English
    The Study of Metal Structures and Their Mechanical Properties focuses on metal structures and their mechanical properties. Topics covered range from the crystalline state of metal structures to lattice geometry and crystal symmetry, along with dislocations and lattice faults. Electrons in metals are also discussed, along with alloys and dispersions. Comprised of 13 chapters, this book begins with an introduction to networks of points in space, or "space lattices", followed by a detailed account of the geometry of crystal lattices and the symmetry of crystals. Subsequent chapters focus on electrons in metals; alloys and dispersions; lattice faults; some properties of dislocations; and elastic strain and internal stress. Some basic techniques are purposely illustrated by simple but significant applications. The unidirectional plastic strain and static strength displayed by a single-phase metal at normal temperature are examined, together with the basic processes of cyclic strain and fatigue strength. The final three chapters deal with combined unidirectional and cyclic strain; deformation at elevated temperatures and creep strength; and the problem of developing economic material with small plasticity that is small enough to permit high strength but large enough to damp any sudden crack growth. This monograph will be of interest to undergraduates who plan a serious study of material science and to established engineers who still like to think about how things work.

  • Safety at Work

    • 3rd Edition
    • John R. Ridley
    • English
    Safety at Work features articles from 25 specialist contributors written in association with the Institution of Occupational Safety and Health. This third edition of the book contains revisions to reflect developments in health and safety legislation and to rationalize the structure of some of the chapters. This book is organized into 31 chapters. Several chapters from the second edition were revised. Chapters on occupational safety law were combined into one chapter. The Management Techniques and Behavioral Science chapters were also combined in to Management of Risk to reflect the growing importance of broad based risk control strategies. A chapter on the employer's obligations for safety was included to replace the behavioral science techniques chapter and the practical day-to-day engineering application of physics and chemistry techniques was retitled Engineering science. A new chapter on the safe use of chemicals has also been added to cover with the important field covered by the Control of Substances Hazardous to Health Regulations 1988. This book will be of interest to occupational safety professionals and others interested in workplace safety.

  • CIM Handbook

    The Opportunities for Rationalisation Opened up by the Acquisition and Integration of Computer Automation
    • 1st Edition
    • M. Mesina + 2 more
    • English
    CIM Handbook: The Opportunities for Rationalisation Opened Up by the Acquisition and Integration of Computer Automation aims to help everyone responsible for structuring computer integrated manufacturing (CIM) concepts and for procuring and selecting CIM components, to find the solutions which meet their requirements in an optimal way, as well as having scope for future development. The significance of the most important individual CIM packages, their function, the increase in efficiency to be obtained by their implementation and the prerequisites for their integration in a total CIM concept will all be clearly set out in this book. The book begins with a discussion of CIM and the increasing competition faced by companies in both domestic and international markets. This is followed by separate chapters on the most important CIM packages; the basic prerequisites of CIM, namely local networks and databases; the implementation of CIM projects; and CIM concepts for the middle-order companies. The final chapter describes the successful implementation of an automated assembly provisioning system in the car industry.

  • Educational Electronics Equipment 1967–68

    Pergamon Electronics Data Series
    • 1st Edition
    • G. W. A. Dummer + 1 more
    • English
    Educational Electronics Equipment 1967-68 presents a critical review of electronic and electronic-based equipment designed precisely for educational and instructional purposes. It discusses the equipment for instruction and training in physics, electronics, and computer control. It addresses the nature of electronic aids use in technical establishments. Some of the topics covered in the book are the description of lecture demonstration equipment; components of Model 70 digital computer trainer; advantages of low-cost teaching computer; uses of educational analogue computer; description of universal laboratory machine; parts of protective systems dynamic simulator; and content of machine demonstration kit. The mechanisms of operator training equipment are fully covered. Type MS 150 modular servo system and DC-8 engine trainer are discussed. An in-depth observation made on the control circuit for a stepping motor is given. A study of the functions of semi-automatic flight inspection simulator is also presented. A chapter is devoted to the Atlas missile airborne propellant feed and pressurization system trainer. Another section focuses on the mechanisms of Boeing 707 cockpit familiarization trainer. The book can provide useful information to teachers, trainer, students, and researchers.

  • A Course of Mathematics for Engineers and Scientists

    Volume 1
    • 1st Edition
    • Brian H. Chirgwin + 1 more
    • English
    A Course of Mathematics for Engineers and Scientists, Volume 1 studies the various concepts in pure and applied mathematics, specifically the technique and applications of differentiation and integration of one variable, geometry of two dimensions, and complex numbers. The book is divided into seven chapters, wherein the first of which presents the introductory concepts, such as the functional notation and fundamental definitions; the roots of equations; and limits and continuity. The text then tackles the techniques and applications of differentiation and integration. Geometry of two dimensions and complex numbers are also encompassed in the book. The text will be very invaluable to students of pure and applied mathematics and engineering, as well as those mathematicians and engineers who need a refresher on the topic.

  • Sensor Technologies for Civil Infrastructures, Volume 2

    Applications in Structural Health Monitoring
    • 1st Edition
    • Jerome P. Lynch + 2 more
    • English
    Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume II provides an overview of sensor data analysis and case studies in assessing and monitoring civil infrastructures. Part one focuses on sensor data interrogation and decision making, with chapters on data management technologies, data analysis, techniques for damage detection and structural damage detection. Part two is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field.

  • Disaster Planning

    Proceedings of a Symposium Held at the Royal Naval Hospital, Haslar, Gosport, Hants, on 10 and 11 October, 1974
    • 1st Edition
    • J. W. Richardson
    • English
    Disaster Planning covers the proceedings of a symposium held at the Royal Naval Hospital Haslar, Gosport, Hants in October 10 and 11, 1974. The book focuses on deliberate actions to be carried out in the occurrence of a disaster. The selection first underscores planning on maritime, railway, and road traffic accidents. Discussions focus on control of an incident, multiple accident procedures, medical aspects of road traffic accidents, role of railway medical officers, railway staff action at an accident, local major disaster plans, and survivors and rescue. The manuscript then takes a look at nuclear accidents, civil disturbances, and major fires. Topics include types of major fires, management of casualties, public relations, decontamination, casualty handling, and public health aspects. The publication ponders on control at a scene of disaster, categorization of casualties, road transport and communications, reception and triage of casualties, and supplies. Concerns include drugs, blood, stretchers and blankets, action by officer in charge of division, and recovery stage of incident. The selection is a dependable source material for researchers interested in disaster preparedness.

  • Abbreviated Guide

    Pneumatic Conveying Design Guide
    • 1st Edition
    • David Mills
    • English
    Abbreviated Guide: Pneumatic Conveying Design Guide describes the selection, design, and specification of conventional pneumatic conveying systems. The design procedure uses previous test data on the materials to be conveyed. The book also discusses system economics, operating costs, the choice of appropriate components or systems, system control, and system flexibility. The design system involves the type of conveying system for installation, the pipeline parameters, and also the plant components. System selection covers the properties of the material to be conveyed, plant layout, material properties, as well as whether an open system or a closed system is more appropriate. In pipeline design, the engineer should consider the bore of the pipeline, the air requirements in terms of delivery pressure and volumetric flow rate. Based on this data, he can determine the rating of the air mover to achieve the optimal material flow rate. From the pipeline design study, the engineer can then evaluate all the necessary operating parameters at each pipeline bore to identify plant component specifications. He can then compute for the costs of the components and operating costs of the system. Engineers, technicians, and investigators involved in industrial pneumatic conveyance will find the book highly useful.

  • Electrical and Electronic Principles

    Volume 3
    • 2nd Edition
    • S.A. Knight
    • English
    Electrical and Electronic Principles, 3 focuses on the principles involved in electrical and electronic circuits, including impedance, inductance, capacitance, and resistance. The book first deals with circuit elements and theorems, D.C. transients, and the series circuits of alternating current. Discussions focus on inductance and resistance in series, resistance and capacitance in series, power factor, impedance, circuit magnification, equation of charge, discharge of a capacitor, transfer of power, and decibels and attenuation. The manuscript then examines the parallel circuits of alternating current, transformer principles, and three-phase circuits. Topics include power in a balanced system, regulation and efficiency, maximum power transfer, transformation ratio, current transformation, input resistance, high-frequency transformers, resistance and inductance, and inductance and capacitance. The publication elaborates on the principles of modulation, control principles, induction motor, and methods of measurement. Concerns include rotating field, measurement of alternating quantities, complex waves, attenuation, damped oscillations, integral control, phasor representation, and pulse modulation. The text is a dependable source of information for electrical and electronics engineers.

Related subjects