Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Simplified Design of Voltage/Frequency Converters

    • 1st Edition
    • John Lenk
    • English
    Simplified Design of V/F Converters shows how to design and experiment with V/F converters, both voltage-to-frequency and frequency-to-voltage... The design approach here is the same one used in all of John Lenk's best-selling books on simplified and practical design. Throughout the book, design problems start with guidelines for selecting all components on a trial-value basis, assuming a specific design goal and set of conditions. Then, using the guideline values in experimental circuits, the desired results are produced by varying the experimental component values, if needed. If you are a working engineer responsible for designing VFCs, or selecting IC converters, the variety of circuit configurations described here should simplify your task. Not only does the book describe converter-circuit designs, but it also covers the most popular forms of VFC ICs available. Throughout the book, you will find a wealth of information on VFC ICs and related components, including how to test and troubleshoot completed circuits.

  • Audio IC Users Handbook

    • 2nd Edition
    • R M MARSTON
    • English
    A vast range of audio and audio-associated ICs are readily available for use by design engineers and technicians. This handbook is a comprehensive guide to the most popular and useful of these devices, including about 370 circuits with diagrams. It deals with ICs such as low frequency linear amplifiers, dual pre-amplifiers, audio power amplifiers, charge coupled device delay lines, bar-graph display drivers, and power supply regulators. It shows how to use these devices in circuits ranging from simple signal conditioners and filters to complex graphic equalisers, stereo amplifier systems, and echo/reverb delay line systems. Not only does this Handbook contain a huge collection of circuits using state-of-the-art and readily available ICs, but also it gives a thorough grounding in theoretical information relating to the various aspects of modern audio systems and to various dedicated types of audio ICs. Newnes Circuits Manuals and User's Handbooks by Ray Marston cover a wide range of electronics subjects in an easy-to-read and non-mathematical manner, presenting the reader with many practical applications and circuits. They are specifically written for the practising design engineer, technician, and the experimenter, as well as the electronics students and amateur. The ICs and other devices used in the practical circuits are modestly priced and readily available types, with universally recognised type numbers. Ray Marston has proved, through hundreds of circuits articles and books, that he is one of the leading circuit designers and writers in the world. He has written extensively for Popular Electronics, Electronics Now, Electronics and Beyond, Electronics World, Electronics Today International and Electronics Australia, amongst others. Other books by Ray Marston from Newnes include:Modern CMOS Circuits ManualPower Control Circuits ManualModern TTL Circuits ManualElectronic Alarm Circuits ManualOptoelectronic... Circuits ManualInstrumentatio... and Test Gear Circuits ManualDiode, Transistor and FET Circuits ManualTimer/Generato... Circuits ManualElectronic Circuits Pocket Library in 3 volumes:Linear IC Pocket Book (Vol 1)Passive and Discrete Circuits Pocket Book (Vol 2)Digital Logic IC Pocket Book (Vol 3)

  • Offshore Blowouts: Causes and Control

    • 1st Edition
    • Per Holland Ph.D.
    • English
    This book, based on the SINTEF Offshore Blowout Database, thoroughly examines U.S. Gulf of Mexico and Norwegian and UK North Sea blowouts that occurred from 1980 to 1994. This book reveals the operations that were in progress at the onset of the blowouts and helps you learn from the mistakes of others.

  • Beginning Electronics Through Projects

    • 1st Edition
    • Andrew Singmin
    • English
    If you are interested in electronics, but don't know where to start, Beginning Electronics Through Projects lets you learn the basics through building 10 step-by-step projects. Theory is limited to "need-to-know" information that will allow you to get started right away. No complex math. Common components and their functions are described briefly in everyday terms. All the components used in the book are widely available, and pre-assembled parts kits and circuit boards are available by mail from the author. Andrew Singmin is President of Singmin Enterprises, an electronics consulting company based outside of Ottawa, Ontario, in Canada. He has been involved in the electronics industry for more than 20 years, and has had numerous articles published in Electronics Handbook and Popular Electronics. His articles have specialized in teaching electronics to the beginner through projects. Mr. Singmin attained his electronics engineering degree in London, UK, and has postgraduate degrees in Semiconductor Physics (Masters) and Solid State Physics (Doctorate).

  • Reliability, Maintainability and Risk

    • 5th Edition
    • David J. Smith
    • English
    Reliability, Maintainability and Risk deals with all aspects of reliability, maintainability and safety-related failures in a simple and straightforward style, explaining technical terms and jargon and pre-supposing no prior knowledge of the subject. The author explains dealing with numerical data, making realistic predictions using the minimum of mathematics, and handling the limitations of reliability parameters.A well-established book has been considerably expanded in this fully revised fifth edition to take account of:* RCM and the optimisation of maintenance strategies.* Trends in the integrity of safety-related systems.* Risk assessment.* Updated information on software tools for reliability and risk assessment.

  • Handbook of Structural Welding

    Processes, Materials and Methods Used in the Welding of Major Structures, Pipelines and Process Plant
    • 1st Edition
    • J. F. Lancaster
    • English
    This handbook provides a comprehensive analysis of the current state of welding technology as applied to large structures and process plant. The author takes account of the increasing necessity for engineers at all levels to be aware of problems such as fatigue failure and provides advice.

  • Advanced Engineering Dynamics

    • 1st Edition
    • H. Harrison + 1 more
    • English
    'Advanced Engineering Dynamics' bridges the gap between elementary dynamics and advanced specialist applications in engineering.It begins with a reappraisal of Newtonian principles before expanding into analytical dynamics typified by the methods of Lagrange and by Hamilton's Principle and rigid body dynamics. Four distinct vehicle types (satellites, rockets, aircraft and cars) are examined highlighting different aspects of dynamics in each case. Emphasis is placed on impact and one dimensional wave propagation before extending the study into three dimensions. Robotics is then looked at in detail, forging a link between conventional dynamics and the highly specialised and distinctive approach used in robotics. The text finishes with an excursion into the Special Theory of Relativity mainly to define the boundaries of Newtonian Dynamics but also to re-appraise the fundamental definitions. Through its examination of specialist applications highlighting the many different aspects of dynamics this text provides an excellent insight into advanced systems without restricting itself to a particular discipline. The result is essential reading for all those requiring a general understanding of the more advanced aspects of engineering dynamics.

  • Metallurgy of Basic Weld Metal

    • 1st Edition
    • G M Evans + 1 more
    • English
    The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.

  • Time-Varying Image Processing and Moving Object Recognition, 4

    • 1st Edition
    • V. Cappellini
    • English
    New digital image processing and recognition methods, implementation techniques and advanced applications (television, remote sensing, biomedicine, traffic, inspection, robotics, etc.) are presented in this volume. Novel approaches (i.e. digital filters, source coding, neural networks etc.) for solving 2-D and 3-D problems are described. Many papers focus on the motion estimation and tracking recognition of moving objects. The increasingly important field of Cultural Heritage is also covered. Some papers are more theoretical or of review nature, while others contain new implementations and applications. Generally the book presents - for the above outlined area - the state of the art (theory, implementation, applications) with future trends.This book will be of interest not only to researchers, professors and students in university departments of engineering, communications, computers and automatic control, but also to engineers and managers of industries concerned with computer vision, manufacturing, automation, robotics and quality control.

  • Active Control of Vibration

    • 1st Edition
    • Christopher C. Fuller + 2 more
    • English
    This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers.

  • Elastohydrodynamics - '96

    Fundamentals and Applications in Lubrication and Traction
    • 1st Edition
    • Volume 32
    • C. Taylor + 7 more
    • English
    This volume represents the latest issue of a collection of Proceedings each dealing with a different topic in Tribology. This volume contains the Proceedings from the 23rd Leeds-Lyon Symposium which addressed the topic of Elastohydrodynamics and was attended by many international experts in the field.The Keynote Address was presented by Professor Stathis Ioannides on the subject of "Tribology in Rolling Element Bearings" and was followed by fifteen other sessions covering a wide variety of general areas from "Experimental" to "Lubricant Properties". In addition, nine other invited technical papers were presented to support the sessions.

  • Selection and Use of Engineering Materials

    • 3rd Edition
    • F A A Crane + 2 more
    • English
    Selection and Use of Engineering Materials provides an understanding of the basic principles of materials selection as practised in engineering manufacture and design with an overview of established materials usage. Emphasis is placed on identifying service requirements and how materials relate to those requirements, rather than listing materials and describing applications. This edition has been revised throughout and now includes coverage of the use of new materials in engineering, materials for bearings and tribological usage, and the use of materials in civil engineering structures. It has also been expanded to include more case studies and worked examples in order to provide tangible and interactive contact with the content matter. The book also contains a detailed consideration of the weldability of steels, the welding of plastics and adhesion. programmes. An example of this development is the inclusion of a chapter detailing the use of materials in automobile structures; a field in which the traditional use of steel is being displaced as the application of reinforced polymers becomes more widespread. The book also reflects the growing use of computerized databases and materials selection programmes.

  • Mineral Processing Technology

    • 6th Edition
    • Barry A. Wills
    • English
    'Mineral Processing Technology' provides practising engineers and students of mineral processing, metallurgy and mining with a review of the common ore-processing techniques utilized in modern installations. Each chapter encompasses all the recent technical developments which are advancing at a rapid rate to deal with the processing of increasingly complex and refractory ores. New equipment and process routes are also discussed.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. Four appendices are attached, one of which contains a valuable collection of BASIC computer programs. The work is fully indexed and referenced.

  • Newnes Electronics Toolkit

    • 2nd Edition
    • Geoff Philips
    • English
    The author has used his thirty years of experience in industry to draw together the basic information that is constantly in demand. Facts, formulae, data and charts are presented to help the engineer when designing, developing, evaluating, fault finding and repairing electronic circuits. The result is this handy workmate volume: a memory aid, tutor and reference source which is recommended to all electronics engineers, students and technicians and is best kept within reach at all times. Have you ever wished for a concise and comprehensive guide to electronics concepts and rules of thumb? Have you ever been unable to source a component, or choose between two alternatives for a particular application? How much time do you spend searching for basic facts or manufacturer's specifications? What you want is the Newnes Electronics Toolkit.

  • Mechanics of Materials Volume 1

    An Introduction to the Mechanics of Elastic and Plastic Deformation of Solids and Structural Materials
    • 3rd Edition
    • E.J. Hearn
    • English
    One of the most important subjects for any student of engineering to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.All the essential elements of a treatment of these topics are contained within this course of study, starting with an introduction to the concepts of stress and strain, shear force and bending moments and moving on to the examination of bending, shear and torsion in elements such as beams, cylinders, shells and springs. A simple treatment of complex stress and complex strain leads to a study of the theories of elastic failure and an introduction to the experimental methods of stress and strain analysis.More advanced topics are dealt with in a companion volume - Mechanics of Materials 2. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end.

  • Hermetic Pumps:

    The Latest Innovations and Industrial Applications of Sealless Pumps.
    • 1st Edition
    • Robert Neumaier
    • English
    The development of hermetic (sealless) pumps over the last half century are traced and recent design innovations are described. The current state of the technology is analyzed. The design, performance, and application of hermetic centrifugal pumps and rotary displacement pumps are studied.

  • Home Security

    Alarms, Sensors and Systems
    • 2nd Edition
    • Vivian Capel
    • English
    As crime rates soar every householder looks at ways to protect their home and its contents. This practical guide, in straightforward language, spells out the simple steps you can take to guard your home. It shows how burglars work, and how to thwart them. The selection and installation of alarm systems are described simply. This handy volume may provide the information you need to avoid costly and upsetting break-ins. As well as describing the bewildering range of security devices on offer, more technical readers may consider their own solutions using descriptions and circuits for two simple tested designs are given, one for the home and one for a foolproof public hall system. There is a plethora of security devices now on offer. Large sums can be spent on elaborate systems, yet weak links can be left unrecognised - except by the housebreaker! Good independent advice is scarce, as most security firms favour their own products. This book explains the pros and cons of alarm systems, including how to avoid faults, and find them if they occur. `Friendly security' is particularly featured, and other security devices are given a critical scrutiny.

  • Advances in Safety and Reliability

    • 1st Edition
    • C. Guedes Soares
    • English
    These three volumes comprise the papers presented at the ESREL '97 International Conference on Safety and Reliability held in Lisbon, Portugal, 17-20 June 1997. The purpose of the annual ESREL conferences is to provide a forum for the presentation of technical and scientific papers covering both methods and applications of safety and reliability to a wide range of industrial sectors and technical disciplines and, in so doing, to enhance cross-fertilization between them.A broad view is taken of safety and reliability which includes probabilistically-ba... methods, or, more generally, methods that deal with the quantification of the uncertainty in the knowledge of the real world and with decision-making under this uncertainty.The areas covered include: design and product liability; availability, reliability and maintainability; assessment and management of risks to technical systems; health and the environment; and mathematical methods of reliability and statistical analysis of data.The organization of the book closely follows the sessions of the conference with each of the three volumes containing papers from two parallel sessions, comprising a total of 270 papers by authors from 35 countries.

  • Electrostatic Hazards

    • 1st Edition
    • Günter Luttgens + 1 more
    • English
    In the US, UK and Europe there is in excess of one notifiable dust or electrostatic explosion every day of the year. This clearly makes the hazards associated with the handling of materials subject to either cause or react to electrostatic discharge of vital importance to anyone associated with their handling or industrial bulk use. This book provides a comprehensive guide to the dangers of static electricity and how to avoid them. It will prove invaluable to safety managers and professionals, as well as all personnel involved in the activities concerned, in the chemical, agricultural, pharmaceutical and petrochemical process industries. Electrostatic Hazards makes extended use of case studies to illustrate the principles being expounded, thereby making it far more open, accessible and attractive to the practitioner in industry than the highly theoretical texts which are also available. The authors have many years' experience in the area behind them, including the professional teaching of the content provided here. Günter Lüttgens is a widely acknowledged consultant who travels Europe providing training to major industrial corporations on this subject, whilst Norman Wilson practices what is written here in his professional capacity with the British Textile Technology Group.

  • Advanced Methods in Materials Processing Defects

    • 1st Edition
    • Volume 45
    • M. Predeleanu + 1 more
    • English
    This collection of papers focus on advanced methods for predicting and avoiding the occurrence of defects in manufactured products. A new feature is included, namely, the influence of the processing-induced defects on the integrity of structures.The following topics are developed: damage modeling; damage evaluation and rupture; strain localization and instability analysis; formability characterization; prediction of shape inaccuracies; influence of defects on structural integrity. The main manufacturing operations are covered and various materials are examined, such as new and conventional metal alloys, ceramics, polymers and composites.

  • Mercury Cadmium Telluride Imagers

    A Patent-oriented Survey
    • 1st Edition
    • Volume 5
    • A.C. Onshage
    • English
    In two parts, this book describes the evolution of mercury cadmium telluride (HgCdTe) imager structures based upon published patents and patent applications. The first part covers monolithic arrays, and the second part describes hybrid arrays. Each part has 5 chapters, with each document placed in chronological order, with the documents with the earliest priority placed first. Focus has been directed at the steps of manufacturing and structures of imagers.There is an index at the end of the book containing the patent number, the name of the applicant and the date of publication of each cited document.This monograph will serve as a useful summary of the patents and patent applications in the field of mercury cadmium telluride imagers.

  • EDN Design Ideas (CD ROM)

    • 1st Edition
    • EDN
    • English
    The EDN Design Ideas CD-ROM contains the articles from EDN's Design Ideas section and related articles from EDN's Bulletin Board. The Design Ideas section of EDN consists of articles submitted by EDN readers to give hints to designers who are troubleshooting or who need ideas to solve circuit design problems. Powerful key word search allows you to quickly find all articles of interest. This CD-ROM has cut and paste capability to export design ideas to other programs. The bookmark and notes functions also help users adapt the information to their specific needs.

  • Advances in Heat Transfer

    Heat Transfer in Nuclear Reactor Safety
    • 1st Edition
    • Volume 29
    • English
    Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowablein either journals or texts. Volume 29 is a special volume devoted to nuclear reactor safety.

  • Quality and Standards in Electronics

    • 1st Edition
    • Ray Tricker
    • English
    A manufacturer or supplier of electronic equipment or components needs to know the precise requirements for component certification and quality conformance to meet the demands of the customer. This book ensures that the professional is aware of all the UK, European and International necessities, knows the current status of these regulations and standards, and where to obtain them.

  • Elementary Differential Geometry

    • 2nd Edition
    • Barrett O'Neill
    • English
    Written primarily for readers who have completed the standard first courses in calculus and linear algebra, Elementary Differential Geometry, Second Edition provides an introduction to the geometry of curves and surfaces. Although the popular First Edition has been extensively modified, this Second Edition maintains the elementary character of that volume, while providing an introduction to the use of computers and expanding discussion on certain topics. Further emphasis has been placed on topological properties, properties of geodesics, singularities of vector fields, and the theorems of Bonnet and Hadamard. For readers with access to the symbolic computation programs, Mathematica or Maple, the book includes approximately 30 optional computer exercises. These are not intended as an essential part of the book, but rather an extension. No computer skill is necessary to take full advantage of this comprehensive text.

  • Practical Oscillator Handbook

    • 1st Edition
    • Irving Gottlieb
    • English
    Oscillators have traditionally been described in books for specialist needs and as such have suffered from being inaccessible to the practitioner. This book takes a practical approach and provides much-needed insights into the design of oscillators, the servicing of systems heavily dependent upon them and the tailoring of practical oscillators to specific demands. To this end maths and formulae are kept to a minimum and only used where appropriate to an understanding of the theory. Once grasped, the theory of the general oscillator is easily put into practical use in actual oscillators. The final two chapters present a collection of oscillators from which the practising engineer or the hobbyist can obtain useful guidance for many kinds of projects. Irving Gottlieb is a leading author of many books for practising engineers, technicians and students of electronic and electrical engineering.

  • Fluid Mechanics of Viscoelasticity

    General Principles, Constitutive Modelling, Analytical and Numerical Techniques
    • 1st Edition
    • Volume 6
    • R.R. Huilgol + 1 more
    • English
    The areas of suspension mechanics, stability and computational rheology have exploded in scope and substance in the last decade. The present book is one of the first of a comprehensive nature to treat these topics in detail. The aim of the authors has been to highlight the major discoveries and to present a number of them in sufficient breadth and depth so that the novice can learn from the examples chosen, and the expert can use them as a reference when necessary.The first two chapters, grouped under the category General Principles, deal with the kinematics of continuous media and the balance laws of mechanics, including the existence of the stress tensor and extensions of the laws of vector analysis to domains bounded by fractal curves or surfaces. The third and fourth chapters, under the heading Constitutive Modelling, present the tools necessary to formulate constitutive equations from the continuum or the microstructural approach. The last three chapters, under the caption Analytical and Numerical Techniques, contain most of the important results in the domain of the fluid mechanics of viscoelasticity, and form the core of the book.A number of topics of interest have not yet been developed to a theoretical level from which applications can be made in a routine manner. However, the authors have included these topics to make the reader aware of the state of affairs so that research into these matters can be carried out. For example, the sections which deal with domains bounded by fractal curves or surfaces show that the existence of a stress tensor in such regions is still open to question. Similarly, the constitutive modelling of suspensions, especially at high volume concentrations, with the corresponding particle migration from high to low shear regions is still very sketchy.

  • Dynamics of Mechanical Systems

    • 1st Edition
    • Carl T. F. Ross
    • English
    Adopting a step by step methodical approach, the book is aimed at first and second year undergraduates and addresses the mathematical difficulties faced by them. Solution manual free from: http://www.mech.port...

  • Macro-Engineering

    MIT Brunel Lectures on Global Infrastructure
    • 1st Edition
    • F P Davidson + 2 more
    • English
    This volume makes available a reflection on large-scale engineering for building a better world. International authorities from engineering, oceanography, academia, public service, and law describe how great and imaginative concepts may be refined, tested, adapted, financed, implemented and put to use. Here are records and commentaries about some of the world's significant engineering achievements, including the planning and design of Nigeria's new capital city, and the use of software by the US military to clean up the Exxon-Valdez oil spill pollution in Alaska.

  • Signal Processing in Electronic Communications

    For Engineers and Mathematicians
    • 1st Edition
    • M J Chapman + 2 more
    • English
    This text deals with signal processing as an important aspect of electronic communications in its role of transmitting information, and the language of its expression. It develops the required mathematics in an interesting and informative way, leading to confidence on the part of the reader. The first part of the book focuses on continuous-time models, and contains chapters on signals and linear systems, and on system responses. Fourier methods, so vital in the study of information theory, are developed prior to a discussion of methods for the design of analogue filters. The second part of the book is directed towards discrete-time signals and systems. There is full development of the z- and discrete Fourier transforms to support the chapter on digital filter design.All preceding material in the book is drawn together in the final chapter on some important aspects of speech processing which provides an up-to-date example of the use of the theory. Topics considered include a speech production model, linear predictive filters, lattice filters and cepstral analysis, with application to recognition of non-nasal voiced speech and formant estimation.In addition to course requirement for undergraduates studying electrical engineering, applied mathematics, and branches of computer science involving such signal processing as speak synthesis, computer vision and robotics, this book should provide a valuable reference source for post-graduate research work in industry and academia.An elementary knowledge of algebra (e.g. partial fractions) is a prerequisite, and also calculus including differential equations. A knowledge of complex numbers and of the basic concept of a function of a complex variable is also needed.

  • Effect of Disorder and Defects in Ion-Implanted Semiconductors: Electrical and Physiochemical Characterization

    • 1st Edition
    • Volume 45
    • English
    Defects in ion-implanted semiconductors are important and will likely gain increased importance in the future as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer afterhigh temperature annealing. Electrical and Physicochemical Characterization focuses on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented.

  • Control Theory and Design

    An RH2 and RH Viewpoint
    • 1st Edition
    • Patrizio Colaneri + 2 more
    • English
    Control systems design methodologies have long suffered the traditional and myopic dichotomy between time and frequency domain approaches, each of them being specialized to cope with only scarcely overlapping performance requirements. This book is aimed at bridging the two approaches by presenting design methodologies based on the minimization of a norm (H2/H() of a suitable transfer function. A distinctive feature of these techniques is the fact that they do not create only one solution to the design problem, instead they provide a whole set of admissible solutions which satisfy a constraint on the maximum deterioration of the performance index. A systematic book on this topic is long overdue. Self-contained and practical in its approach, Control Theory and Design enables the reader to use the relevant techniques in various real-life applications. The text covers the basic facts of robustcontrol and theory as well as more recent achievements, such as robust stability and robust performance in presence of parameter uncertainties. It features a new perspective on classical LQC results and further sections on robust synthesis, nonclassicaloptimiza... problems, and analysis and synthesis of uncertain systems. Control Theory and Design is essential reading for graduates and those entering the research field. The required mathematical background is provided so that the book is also suitable for undergraduate students with some knowledge of basic systemsand control.

  • Crash Course in Electronics Technology

    • 2nd Edition
    • Louis E. Frenzel
    • English
    Combined with the two other Crash Course books, Digital Technology and Microprocessor Technology, this book forms a complete course in electronics and microcomputer technology appropriate for technical schools, industrial training, and hobbyists.Crash Course in Electronics Technology teaches the basics of electronics, components, and circuits in an easy-to-understand format. Each chapter includes learning objectives, clear explanations and examples, and an end-of-chapter self-quiz. The drill-and-review software included with the book allows the learners to test themselves on the contents of each chapter, providing a second way to reinforce the material. A final chapter teaches the basics of troubleshooting circuits. Louis Frenzel is an experienced electronics engineer and educator, as well as the author of many magazine articles and texts. He is currently based in Texas.

  • Theoretical and Applied Mechanics 1996

    • 1st Edition
    • E. Watanabe + 2 more
    • English
    These proceedings present an up-to-date and comprehensive review of the field of theoretical and applied mechanics. All the papers are written by leading experts presently active in this subject area.

  • Industrial Applications of Lasers

    • 2nd Edition
    • John F. Ready
    • English
    A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion.

  • Neural Systems for Robotics

    • 1st Edition
    • Omid Omidvar + 1 more
    • English
    Neural Systems for Robotics represents the most up-to-date developments in the rapidly growing aplication area of neural networks, which is one of the hottest application areas for neural networks technology. The book not only contains a comprehensive study of neurocontrollers in complex Robotics systems, written by highly respected researchers in the field but outlines a novel approach to solving Robotics problems. The importance of neural networks in all aspects of Robot arm manipulators, neurocontrol, and Robotic systems is also given thorough and in-depth coverage. All researchers and students dealing with Robotics will find Neural Systems for Robotics of immense interest and assistance.

  • Optical Fiber Telecommunications IIIA

    • 1st Edition
    • Volume 3A
    • Thomas L. Koch
    • English
    Updated to include the latest information on light wave technology, Optical Fiber Telecommunication III, Volumes A & B are invaluable for scientists, students, and engineers in the modern telecommunications industry. This two-volume set includes the most current research available in optical fiber telecommunications, light wave technology, and photonics/optoelectr... The authors cover important background concepts such as SONET, coding device technology, andWOM components as well as projecting the trends in telecommunications for the 21st century.

  • Simplified Design of Data Converters

    • 1st Edition
    • John Lenk
    • English
    Simplified Design of Data Converters shows how to design and experiment with data converters, both analog-to-digital and digital to analog. The design approach here is the same one used in all of John Lenk's best-selling books on simplified and practical design. Throughout the book, design problems start with guidelines for selecting all components on a trial-value basis, assuming a specific design goal and set of conditions. Then, using the guideline values in experimental circuits, the desired results are produced by varying the experimental component values, if needed. If you are a working engineer responsible for designing data-converters circuits, or selecting IC data converters, the variety of circuit configurations described here should generally simplify your task. Not only does the book describe converter-circuit designs, but it also covers the most popular forms of data-converter ICs available. Throughout the book, you will find a wealth of information on data-converter ICs and related components.

  • Optical Fiber Telecommunications IIIB

    • 1st Edition
    • Volume 3B
    • Thomas L. Koch
    • English
    Updated to include the latest information on light wave technology, Optical Fiber Telecommunication III, Volumes A & B are invaluable for scientists, students, and engineers in the modern telecommunications industry. This two-volume set includes the most current research available in optical fiber telecommunications, light wave technology, and photonics/optoelectr... The authors cover important background concepts such as SONET, coding device technology, andWOM components as well as projecting the trends in telecommunications for the 21st century.

  • Television Microprocessor IC Data Files

    • 1st Edition
    • J. EDWARDS
    • English
    Microprocessor ICs are the most complicated part of TV equipment and present special problems to the engineer when fault finding. Complementing the first volume in this series, Television IC Data Files, the most popular microprocessor ICs used in televisions are covered here. Each device is presented graphically with the relevant data information given against each pin to enable the engineer to quickly compare voltage measurements and signal in/out data on a faulty device, with those in the book. All the measurements and signal data in the book were taken under actual working conditions.The purpose of this book is to provide the workshop technician and the field engineer with a valuable and convenient method of fault finding without the need to consult workshop manuals which are often expensive or indeed out of stock. As such it will also be of interest to those on television training courses. John Edwards runs his own audio visual services company and has contributed numerous articles to the trade magazine Television.

  • An Elementary Guide to Reliability

    • 5th Edition
    • G. Dummer + 2 more
    • English
    This classic text has now been completely revised and updated, making it an ideal introductory course in reliability for a wide range of engineering qualifications, including City & Guilds 8030 and HNC/Ds. A new chapter focuses on the role of the microprocessor and microcomputer controller, and the use of algorithms for monitoring system performance. The addition of numerous problems, self-check questions and exam-style questions makes this an extremely useful book for courses with an element of independent study.

  • Digital Signal Processing Demystified

    • 1st Edition
    • James D. Broesch
    • English
    James D. Broesch is a staff engineer for General Atomics, where he is responsible for the design and development of several advanced control systems used on fusion control programs. He also teaches classes in signal processing and hardware design at the University of California-San Diego.

  • Reliability and Optimization of Structural Systems

    • 1st Edition
    • D.M. Frangopol + 2 more
    • English
    This book contains 38 papers presented at the seventh Working Conference on 'Reliability and Optimization of Structural Systems' held at Boulder, Colorado, USA, on April 2-4, 1996. The Working Conference was organized by the IFIP (International Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the seventh in a series of similar conferences. The objectives of the Working Group and hence this publication are:• to promote modern structural systems optimization and reliability theory,• to advance international co-operation in the field of structural system optimization and reliability theory,• to stimulate research, development and application of structural system optimization and reliability theory,• to further dissemination and exchange of information on reliability and optimization of structural systems, and• to encourage education in structural system organization and reliability theory.

  • Compressors: Selection and Sizing

    • 2nd Edition
    • Royce N. Brown
    • English
    This practical reference provides in-depth information required to understand and properly estimate compressor capabilities and select proper designs. Engineers and students will gain a thorough understanding of compression principles, equipment, applications, selection, sizing, installation, and maintenance. The many examples clearly illustrate key aspects to help readers understand the "real world" of compressor technology.This second edition is completely updated with new API standrard. It presents the latest technology in the areas of efficiency, 3-D geometry, electronics, CAD, and the use of plant computers. The critical chapter on negotiating the purchase of a compressor now reflects current industry practices for preparing detailed specifications, bid evaluations, engineering reviews, and installation. A new chapter compares the reliability of various types of compressors.

  • Digital Circuit Testing and Testability

    • 1st Edition
    • Parag K. Lala
    • English
    In the past few years, reliable hardware system design has become increasingly important in the computer industry. Digital Circuit Testing and Testability is an easy to use introduction to the practices and techniques in this field.Parag K. Lala writes in a user-friendly and tutorial style, making the book easy to read, even for the newcomer to fault-tolerant system design. Each informative chapter is self-contained, with little or no previous knowledge of a topic assumed. Extensive references follow each chapter, making further research in a particular area readily available. Each chapter covers a different aspect or technological component of fault-tolerant system design, and this book is an excellent compilation of up-to-date information in an area where such a book is needed.

  • Advances in Applied Mechanics

    • 1st Edition
    • Volume 33
    • English
    Five articles on recent developments in solids and structures comprise Volume 33 of the Advances in Applied Mechanics. Each chapter is a mix of field survey and new work. The topics include structural reliability, failure modes of composites and thin films, the mechanics of micro-structural evolution, and strain gradient plasticity.

  • Understanding Telephone Electronics

    • 3rd Edition
    • Stephen Bigelow
    • English
    Understanding Telephone Electronics is an overview of telephone networking which shows how it is connected with the real world and introduces its component parts. The book explains the basics of the non-electronic telephone set and vital telephone functions. It then explores signal processing, telephone line interfacing, tone and pulse generation, and ringers. These concepts and principles are accompanied by a thorough look at the world of digital communications.The book spells out the advantages and disadvantages of digital transmission, sampling, coding, and the various formats of multiplexed systems. The Central Office and all the various transmission modes are included, providing a complete look at telephone systems. Plus, you learn the evolving features of network transmission and wireless telephones.

  • Non-Invasive Monitoring of Multiphase Flows

    • 1st Edition
    • J. Chaouki + 2 more
    • English
    Non-Invasive Monitoring of Multiphase Flows is a result of the latest advances realized in non-invasive measurement of multiphase systems by means of various tomographic and velocimetric techniques. Written by experts on special topics within the realm of this subject, the book reviews in 15 chapters the theoretical background and the physics of the measurement process for each of a number of techniques. In addition, the mathematical modeling related to the measured property, such as in the image reconstitution problem for tomography, successful application of the techniques for measurement in various multiphase systems and their advantages and limitations are described.Features of this book:- Comprehensive and Complete. Covers both theoretical and application viewpoints of noninvasive measuring techniques in multiphase systems. There is no book available on this subject in the field of multiphase flows- Versatile. Material is presented in such a way that the book can be used either for research or for teaching graduate students specializing in the topic of multiphase flows- Awareness and Uniformity. The engineering community is made aware of advantages of these new techniques and they are presented in a uniform package.The editors strive to provide a comprehensive compendium of all the relevant information essential for practising engineers, consultants, university professors, graduate students and technicians who are involved in the study of multiphase flow phenomena. The book, although directed to the study of multiphase systems of interest to the chemical engineer, also provides valuable information for all other engineering disciplines that deal with multiphase systems.

  • Major Process Equipment Maintenance and Repair

    • 2nd Edition
    • Volume 4
    • Heinz P. Bloch + 1 more
    • English
    This updated edition is an invaluable source of practical cost-effective maintenance, repair, installation, and field verification procedures for machinery engineers. It is filled with step-by-step instructions and quick-reference checklists that describe preventive and predictive maintenance for major process units such as vertical, horizontal, reciprocating, and liquid ring vacuum pumps, fans and blowers, compressors, turboexpanders, turbines, and more. Also included are sections on machinery protection, storage, lubrication, and periodic monitoring. A new section examines centrifugal pumps and explains how and why they continue to fail. More new information focuses on maintenance for aircraft derivative gas turbines. This revised edition gives special attention throughout to maintenance and repair procedures needed to ensure efficiency, performance, and long life.

  • Digital Storage Oscilloscopes

    • 1st Edition
    • Ian Hickman
    • English
    Digital storage oscilloscopes have long since completely supplanted analog storage oscilloscopes and have reached a degree of sophistication and performance which enable them to rival the most advanced real time oscilloscopes. In this comprehensive handbook, which provides a practical vade mecum for the engineer, Ian Hickman describes how they work and how to use them to best advantage.A wide range of models is available. This book includes a guide to all makes and models and will be best kept beside the instrument for instant reference. It will also be a most helpful guide to the subject for students and trainees. Ian Hickman is an experienced designer and author of best-selling titles including 'Oscilloscopes: How to Use Them, How They Work', Newnes Practical Radio Frequency Handbook', 'Analog Electronics' and 'Analog Circuits Cookbook'.

Related subjects