Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Theory of Shells

    • 1st Edition
    • Volume 3
    • Philippe G. Ciarlet
    • English
    The objective of Volume III is to lay down the proper mathematical foundations of the two-dimensional theory of shells. To this end, it provides, without any recourse to any a priori assumptions of a geometrical or mechanical nature, a mathematical justification of two-dimensional nonlinear and linear shell theories, by means of asymptotic methods, with the thickness as the "small" parameter.

  • Fatigue Design Procedure for Welded Hollow Section Joints

    Recommendations of IIW Subcommission XV-E
    • 1st Edition
    • X-L Zhao + 1 more
    • English
    This International Institute of Welding (IIW) report was presented at the 52nd Annual Assembly in Lisbon in June 1999. It contains recommendations representing a consensus on international best practice, focusing on a 'hot spot stress' approach.A wide range of joint types is covered, the new fatigue design curve for both RHS and CHS is dealt with and detailed values for stress concentration factors are provided.The purpose of this current IIW document is to serve both as an International Standards Organisation (ISO) draft specification and as a model standard for national and regional specifications worldwide.The Recommendations (Part one) and Commentary (Part two) were edited by Dr X-L Zhao of Monash University, Australia and Professor J A Packer of the University of Toronto, Canada.

  • The Grouting Handbook

    A Step-by-Step Guide to Heavy Equipment Grouting
    • 1st Edition
    • Donald M. Harrison
    • English
    Based on twenty years of research and field experience, this book collects a vast amount of information into a handy reference for mechanical and civil engineers. It focuses on four basic elements of grouting: load carrying capability of the foundation soil; mass design, concrete mix and installation, and curing procedures of the foundation; anchor bolts; and the grout. From the ground up, this book takes you step by step through the grouting process. Clear, straightforward directions give you details on preparing the foundation and surface, and selecting the best material and method. Comprehensive yet concise, this is a convenient handbook for veteran and rookie engineers alike.

  • The Theory and Practice of Worm Gear Drives

    • 1st Edition
    • Ilés Dudás
    • English
    Worm gears are special gears that resemble screws, and can be used to drive other gears. Worm gears, enable two non-touching shafts in a machine to mesh (join) together. This publication, unique in that it combines both theoretical and practical design aspects, including the latest results of research and development, provides detailed treatment of the theory and production of worm drives, as well as the overarching subject of production geometry of helicoidal surfaces.Included are mathematical models for a number of practical applications; a description of dressing equipment required; treatment of inspection and measurement; the use of intelligent systems; worm gearing for power transmission; selection criteria.

  • CE Conformity Marking

    and New Approach Directives
    • 1st Edition
    • Ray Tricker
    • English
    CE Marking can be regarded as a product's trade passport for Europe. It is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in the European Directive. The prime aim of the CE Directive is to ensure that "all industrial products that are placed on the market do not compromise the safety and health of users when properly installed, maintained and used in accordance with their intended purpose. Users and third parties should be provided with a high level of protection and the devices should attain the performance levels claimed by the manufacturer." This book explains the meaning of CE Marking, its history, how the Directive can affect all manufacturers of industrial products, its current status, its associated quality management requirements, and how manufacturers can easily and cost-effectively meet the requirements for CE Conformance.

  • Underwater Repair Technology

    • 1st Edition
    • J Nixon
    • English
    This book provides an overview of the techniques available to the offshore industry for the joining and repair of offshore structures. The last few years have seen many developments in underwater engineering technology where a wide range of welding techniques, and the necessary associated equipment, are now available for underwater joining procedures in the offshore industry.The extraction of hydrocarbons from offshore reserves is now a worldwide industry, with activity on every continent. There are huge steel and concrete structures standing in 200 metres of water, with more innovative designs, such as tethered platforms capable of operating in deeper waters, and with 1000 metre reserves currently being considered. New materials – stainless steels, duplex stainless steels, aluminium, Monel, coated materials, and non-metallic materials such as reinforced plastics are beginning to be used in significant quantities. Joining and inspection techniques have been greatly developed, and new design concepts have been brought into use.Concentrating on repair technology the author presents a survey of the techniques available for the fabrication, repair and modification of structures underwater. His book is an important reference for those working in the international offshore engineering industry, and will also be of value to universities and training establishments offering courses on marine technology.

  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 113
    • Peter W. Hawkes
    • English
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics & Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.

  • Microcontroller Projects in C for the 8051

    • 1st Edition
    • Dogan Ibrahim
    • English
    This book is a thoroughly practical way to explore the 8051 and discover C programming through project work. Through graded projects, Dogan Ibrahim introduces the reader to the fundamentals of microelectronics, the 8051 family, programming in C, and the use of a C compiler. The specific device used for examples is the AT89C2051 - a small, economical chip with re-writable memory, readily available from the major component suppliers. A working knowledge of microcontrollers, and how to program them, is essential for all students of electronics. In this rapidly expanding field many students and professionals at all levels need to get up to speed with practical microcontroller applications. Their rapid fall in price has made microcontrollers the most exciting and accessible new development in electronics for years - rendering them equally popular with engineers, electronics hobbyists and teachers looking for a fresh range of projects. Microcontroller Projects in C for the 8051 is an ideal resource for self-study as well as providing an interesting, enjoyable and easily mastered alternative to more theoretical textbooks.

  • Newnes Workshop Engineer's Pocket Book

    • 1st Edition
    • Roger Timings
    • English
    This Pocket Book is a unique compilation of all the tables, data, techniques, formulae and rules of thumb needed by mechanical engineers in the workshop, at work or at home. With content covering areas such as: workshop calculations and conversion tables; cutting tools; engineering materials; soldering fluxes, and O-rings, it will prove to be an essential tool for technicians, students, model engineers and DIY enthusiasts alike. British Standards are used and referenced throughout.Roger Timings has drawn on his unique practical experience as an engineer, lecturer, author and model engineer to select and bring together the information needed for practical workshop-based engineering. Most of the material in this book has been drawn from his definitive reference work Newnes Mechanical Engineer's Pocket Book, but it has been redrawn and redesigned for ease of reference in the workshop.With Newnes Workshop Engineer's Pocket Book, those undertaking workshop-based engineering projects now have all the key facts, figures, data and tables they need, together in one handy reference guide.

  • Valve Radio and Audio Repair Handbook

    • 1st Edition
    • CHAS MILLER
    • English
    Valve Radio and Audio Repair Handbook is not only an essential read for every professional working with antique radio and gramophone equipment, but also dealers, collectors and valve technology enthusiasts the world over. The emphasis is firmly on the practicalities of repairing and restoring, so technical content is kept to a minimum, and always explained in a way that can be followed by readers with no background in electronics. Those who have a good grounding in electronics, but wish to learn more about the practical aspects, will benefit from the emphasis given to hands-on repair work, covering mechanical as well as electrical aspects of servicing. Repair techniques are also illustrated throughout. This book is an expanded and updated version of Chas Miller's classic Practical Handbook of Valve Radio Repair. Full coverage of valve amplifiers will add to its appeal to all audio enthusiasts who appreciate the sound quality of valve equipment.

  • Speaking of Science

    • 1st Edition
    • Michael Fripp + 1 more
    • Jon Fripp
    • English
    Easy to use, the volume is organized into major scientific categories and subcategories. Many of the quotes are hilarious, and all are insightful. Each quote is carefully referenced, and relevant information about the speaker is also provided.

  • Microfabrication for Industrial Applications

    • 1st Edition
    • Regina Luttge
    • English
    Microfabrication for Industrial Applications focuses on the industrial perspective for micro- and nanofabrication methods including large-scale manufacturing, transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. It gives a history of miniaturization, micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices.Concerning sub-micron feature manufacture, the book explains: the philosophy of micro/ nanofabrication for integrated circuit industry; thin film deposition; (waveguide, plastic, semiconductor) material processing; packaging; interconnects; stress (e.g., thin film residual); economic; and environmental aspects.Micro/nanome... sensors and actuators are explained in depth with information on applications, materials (incl. functional polymers), methods, testing, fabrication, integration, reliability, magnetic microstructures, etc.

  • Plastics in Medical Devices

    Properties, Requirements and Applications
    • 1st Edition
    • Vinny R. Sastri
    • English
    No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.

  • Micromanufacturing Engineering and Technology

    • 1st Edition
    • Yi Qin
    • Yi Qin
    • English
    Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging.

  • Encapsulation Technologies for Electronic Applications

    • 1st Edition
    • Haleh Ardebili + 1 more
    • English
    Electronics are used in a wide range of applications including computing, communication, biomedical, automotive, military and aerospace. They must operate in varying temperature and humidity environments including indoor controlled conditions and outdoor climate changes. Moisture, ionic contamination, heat, radiation and mechanical stresses are all highly detrimental to electronic devices and can lead to device failures. Therefore, it is essential that the electronic devices be packaged for protection from their intended environments, as well as to provide handling, assembly, electrical and thermal considerations. Currently, more than 99% of microelectronic devices are plastic encapsulated. Improvements in encapsulant materials, and cost incentives have stretched the application boundaries for plastic electronic packages. Many electronic applications that traditionally used hermetic packages such as military are now using commercial-off-the-s... (COTS) plastic packages. Plastic encapsulation has the advantages of low cost, smaller form factors, and improved manufacturability. With recent trends in environmental awareness, new environmentally friendly or ' green' encapsulant materials (i.e. without brominated additives) have emerged. Plastic packages are also being considered for use in extreme high and low temperature electronics. 3-D packaging and wafer-level-packagin... (WLP) require unique encapsulation techniques. Encapsulant materials are also being developed for micro-electro-mechan... systems (MEMS), bio-MEMS, bio-electronics, and organic light-emitting diodes (O-LEDs). This book offers a comprehensive discussion of encapsulants in electronic applications. The main emphasis is on the encapsulation of microelectronic devices; however, the encapsulation of connectors and transformers is also addressed. This book discusses 2-D and 3-D packaging and encapsulation, encapsulation materials including environmentally friendly 'green' encapsulants, and the properties and characterization of encapsulants. Furthermore, this book provides an extensive discussion on defects and failures related to encapsulation, how to analyze such defects and failures, and how to apply quality assurance and qualification process for encapsulated packages. This book also provides information on the trends and challenges of encapsulation and microelectronic packages including application of nanotechnology.

  • Principles of Modern Grinding Technology

    • 1st Edition
    • W. Brian Rowe
    • English
    The book is aimed at practitioners, engineers, researchers, students and teachers. The approach is direct, concise and authoritative. Progressing through each major element of the grinding system and then on to machine developments and process control, the reader becomes aware of all aspects of operation and design. Trends are described demonstrating key features. Coverage includes abrasives and super-abrasives, wheel design, dressing technology, machine accuracy and productivity, grinding machine design, high-speed grinding technology, cost optimization, ultra-precision grinding, process control developments, vibration control, coolants and fluid delivery.

  • Hot Embossing

    Theory and Technology of Microreplication
    • 1st Edition
    • Matthias Worgull
    • English
    This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication.

  • Rotational Molding Technology

    • 1st Edition
    • R.J. Crawford + 1 more
    • English
    This book clarifies and quantifies many of the technical interactions in the process. It distinguishes itself from other books on the subject by being a seamless story of the advanced aspects of the rotational molding process. There are seven chapters within the book. The US market for rotational molding products was one billion pounds in the year 2000. The growth of the rotational molding industry has grown at 10 to 15% per year. With this growth has come an increasing need for details on the complex, technical aspects of the process.

  • Handbook of Silicon Based MEMS Materials and Technologies

    • 1st Edition
    • Markku Tilli + 6 more
    • English
    A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: Silicon as MEMS material Material properties and measurement techniques Analytical methods used in materials characterization Modeling in MEMS Measuring MEMS Micromachining technologies in MEMS Encapsulation of MEMS components Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan.

  • Microwave/RF Applicators and Probes for Material Heating, Sensing, and Plasma Generation

    A Design Guide
    • 1st Edition
    • Mehrdad Mehdizadeh
    • English
    Interactions of electromagnetic fields with materials at high frequencies have given rise to a vast array of practical applications in industry, science, medicine, and consumer markets. Applicators or probes, which are the front end of these systems, provide the field that interacts with the material. This book takes an integrated approach to the area of high frequency applicators and probes for material interactions, providing a toolkit for those who design these devices. Particular attention is given to real-world applications and the latest developments in the area. Mathematical methods are provided as design tools, and are often simplified via curve-fitting techniques that are particularly usable by handheld calculators. Useful equations and numerically solved examples, using situations encountered in practice, are supplied. Above all, this volume is a comprehensive and useful reference where the reader can find design rules and principles of high frequency applicators and probes for material processing and sensing applications. Electronic and electrical R&D engineers, physicists, university professors and students will all find this book a valuable reference. Mehrdad Mehdizadeh is with the DuPont Company, Engineering Research & Technology Division in Wilmington, Delaware. His areas of expertise include high frequency hardware and electromagnetic methods of processing, sensing, and characterization of materials. His work and innovation in industrial, scientific, and medical applications of radio frequency and microwaves has resulted in 19 US patents and a number of publications. He earned his Ph.D. and M.S. from Marquette University (1983, 1980), and a B.S. from Sharif University of Technology (1977), all in electrical engineering. Dr. Mehdizadeh is a Senior Member of the Institute of Electrical and Electronic Engineers (IEEE ), Sigma Xi (Scientific Research Society), the International Microwave Power Institute (IMPI ), and a voting member of IEEE Standard Association.

  • The Effect of Creep and Other Time Related Factors on Plastics and Elastomers

    • 2nd Edition
    • Laurence W. McKeen
    • English
    The second edition of the classic data book, The Effect of Creep and Other Time Related Factors on Plastics and Elastomers (originally published in 1991), has been extensively revised with the addition of an abundance of new data, the removal of all out-dated information, and the complete rebuilding of the product and company listings.This new edition also has been reorganized from a polymer chemistry point of view. Plastics of similar polymer types are grouped into chapters, each with an introduction that briefly explains the chemistry of the polymers used in the plastics. An extensive introductory chapter has also been added, which summarizes the chemistry of making polymers, the formulation of plastics, creep-testing, test methods, measurements, and charts, as well as theory and plastic selection.Each chapter is generally organized by product and concludes with comparisons of brand or generic products. The appendices include a list of trade names, plastics sold under those names, and manufacturer. A list of conversion factors for stress measures is also included.ABOUT THE AUTHORLaurence W. McKeen earned a B.S. in Chemistry from Rensselaer Polytechnic Institute in 1973 and a Ph.D. in 1978 from the University of Wisconsin. He began his career with DuPont in 1978 as a mass spectroscopist, but moved into product development in the Teflon® Finishes group in 1980. Dr. McKeen has accumulated over 28 years of experience in product development and applications, working with customers in a wide range of industries, which has led to the creation of dozens of commercial products.

  • Nanotechnology Environmental Health and Safety

    Risks, Regulation and Management
    • 1st Edition
    • Matthew Scott Hull + 1 more
    • Matthew Scott Hull + 1 more
    • English
    This book tackles the debate over nanotechnology's environmental health and safety (EHS) by thoroughly explaining EHS issues, financial implications, foreseeable risks (i.e. exposure, dose, hazards of nanomaterials), and the implications of occupational hygiene precautions and consumer protections. Real-world case studies are included, e.g. the discussion of a leading chemical company's unusual pairing with the USA's largest environmental NGO, and an innovative program designed for small- to mid-sized businesses, which became a model approach for proactive nanotechnology EHS risk management.

  • Multilayer Flexible Packaging

    Technology and Applications for the Food, Personal Care, and Over-the-Counter Pharmaceutical Industries
    • 1st Edition
    • John R. Wagner Jr.
    • John R. Wagner Jr.
    • English
    A comprehensive and highly practical survey of the materials, hardware, processes and applications of flexible plastic films. Aimed at a wide audience of engineers, technicians, managers, purchasing agents and users, Multilayer Flexible Packaging provides a thorough introduction to the manufacturing and applications of flexible plastic films, covering: Materials Hardware and Processes Multilayer film designs and applications The materials coverage includes detailed sections on polyethylene, polypropylene and additives. The dies used to produce multilayer films are explored in the hardware section, and the process engineering of film manufacture explained, with a particular focus on meeting specifications and targets. The section includes unique coverage of the problematic area of bending technology, providing a unique explanation of the issues involved in the blending of viscoelastic non-Newtonian polymeric materials. About the author John R. Wagner, Jr. is President of Crescent Associates, Inc., a consulting firm that specializes in plastic films and flexible packaging. He graduated from the University of Notre Dame with a BS and MS in Chemical Engineering.

  • Micromachining Using Electrochemical Discharge Phenomenon

    Fundamentals and Application of Spark Assisted Chemical Engraving
    • 1st Edition
    • Rolf Wuthrich + 1 more
    • English
    This book explains the fundamentals of SACE, promotes the technology, and encourages researchers and engineers from industry to use it for their specific applications. Therefore, the book, after presenting in details the fundaments of SACE (in particular the Electrochemical Discharges), deals mainly with practical aspects of implementing the machining technology. The book is written so that researchers from fields other than micro-technology (e.g., from life science) will be able to build a simple machining set-up, together with his mechanical work-shop, for individual needs.

  • Handbook of Physical Vapor Deposition (PVD) Processing

    • 2nd Edition
    • Donald M. Mattox
    • English
    This updated version of the popular handbook further explains all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the new edition remains on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications, with additional information to support the original material. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called "war stories", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.

  • Handbook of Deposition Technologies for Films and Coatings

    Science, Applications and Technology
    • 3rd Edition
    • Peter M. Martin
    • English
    This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

  • Non-Destructive Testing in Civil Engineering 2000

    • 1st Edition
    • T. Uomoto
    • English
    The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been to provide an opportunity for discussing current issues and future perspectives of NDT and for promoting mutual understanding among engineers and researchers. Asia is one of the key regions for further development in NDT and this symposium in Japan will be a good opportunity not only to exchange technical information on NDT, but to promote worldwide friendship between engineers in Asian countries and other nations of the world. This volume contains 70 papers providing the most recent research results and findings. The papers are grouped under the following areas: (1) keynote papers, (2) magnetic / electric, (3) steel structures, (4) integrated test, (5) moisture, (6) strength, (7) acoustic emission, (8) various tests, (9) ultrasonic, (10) impact echo, (11) radar, (12) quality and (13) corrosion / cover.

  • Bioimpedance and Bioelectricity Basics

    • 1st Edition
    • Sverre Grimnes + 1 more
    • English
    Bioimpedance and Bioelectricity Basics is unique in providing all the information needed to follow the interdisciplinary subjects of bioimpedance and bioelectricity without having to be a graduate student in the relevant fields. For the first time, one book offers the broadest possible introduction to all use and effects of electrical fields in tissue, dealing with the most basic chemical and physical functions of life. Very few books have covered the dielectric and electrochemical side of the subject, despite its importance; Bioimpedance and Bioelectricity Basics does. It also includes the electrical engineering concepts of network theory and the complex math needed. Up to now, there has been work done by physicists and engineers on one side, doctors and biologists on the other, this book fills the gap, providing the knowledge for both groups.

  • Pocket Guide to Preventing Process Plant Materials Mix-ups

    • 1st Edition
    • Bert Moniz
    • English
    This handy pocket guide condenses vital information into a simple format that explains how to prevent costly materials mix-ups that result from a deficiency in the supply chain. Using easy-to-read, straightforward language, it outlines effective methods of specifying, procuring, receiving and verifying critical materials. Pocket Guide to Preventing Process Plant Materials Mix-ups illustrates how to test and identify materials and provides what you need to know to choose between the various production methods.

  • Battery Reference Book

    • 3rd Edition
    • Thomas P J Crompton
    • English
    Crompton's Battery Reference Book has become the standard reference source for a wide range of professionals and students involved in designing, manufacturing, and specifying products and systems that use batteries. This book is unique in providing extensive data on specific battery types, manufacturers and suppliers, as well as covering the theory - an aspect of the book which makes an updated edition important for every professional's library. The coverage of different types of battery is fully comprehensive, ranging from minute button cells to large installations weighing several hundred tonnes.

  • Principles of Transistor Circuits

    • 9th Edition
    • S W Amos + 1 more
    • English
    Over the last 40 years, Principles of Transistor Circuits has provided students and practitioners with a text they can rely on to keep them at the forefront of transistor circuit design. Although integrated circuits have widespread application, the role of discrete transistors both as important building blocks which students must understand, and as practical solutions to design problems, remains undiminished. The ninth edition has been thoroughly updated to cover the latest technology and applications, including computer circuit simulation, and many diagrams have been revised to bring them in line with current usage. Updated topics include thyristors, Darlington transistors, amplifiers, ring modulators, power supplies, optoelectronics and logic circuits.

  • Electronic Access Control

    • 1st Edition
    • Gerard Honey
    • English
    Access into buildings, controlled access within buildings, perimeter access control and perimeter protection are all areas that have been expanding rapidly within the security industry. All of these areas are now dominated by electronic solutions.Gerard Honey's book is the first to focus on the design and installation of electronic access control systems. By providing the more practical information needed by system designers and installers, as well as essential guidelines for managers with responsibility for security, Electronic Access Control is vital reading for all those involved in the security business.This book provides the underpinning knowledge needed for level 3 NVQs and other SITO courses. The concise, accessible text makes it an ideal coursebook. This same accessibility also makes Electronic Access Control ideal for hard-pressed practitioners.

  • Introduction to Digital Systems

    • 1st Edition
    • John Crisp
    • English
    Introduction to Digital Systems introduces digital electronics from first principles and goes on to cover all the main areas of knowledge and expertise needed by students up to first year degree level, as well as technicians and other professionals. Unlike most texts, Introduction to Digital Systems also covers the practicalities of designing and building circuits, including fault-finding and use of test equipment. Students will find the text ideally matched for courses covering electronics, systems and control, and electronic servicing. Whether you are looking for a complete self-study course in digital electronics, a concise reference text to dip into or a course text that is readable and straightforward, John Crisp has provided the solution.

  • Digital Frequency Synthesis Demystified

    • 1st Edition
    • Bar-Giora Goldberg
    • English
    · In-depth coverage of modern digital implementations of frequency synthesis architectures· Numerous design examples drawn from actual engineering projectsDigital frequency synthesis is used in modern wireless and communications technologies such as radar, cellular telephony, satellite communications, electronic imaging, and spectroscopy. This is book is a comprehensive overview of digital frequency synthesis theory and applications, with a particular emphasis on the latest approaches using fractional-N phase-locked loop technology.

  • Modern Component Families and Circuit Block Design

    • 1st Edition
    • Nihal Kularatna
    • English
    Kularatna's new book describes modern component families and how to design circuit blocks using them. While much of this information may be available elsewhere, in Modern Component Families and Circuit Block Design it is integrated with additional design hints that are unique. The discussion covers most components necessary in an embedded design or a DSP-based real time system design. The chapter on modern semi-conductor sensors allows system designers to use the latest sensor ICs for real-world physical parameter sensing.

  • Practical Electronics Handbook

    • 5th Edition
    • Ian Sinclair
    • English
    Ian Sinclair's Practical Electronics Handbook is one of the most widely used reference texts in the business. It is a unique collection of all the key data, facts, practical guidance and circuit design basics needed by a spectrum of students, electronics enthusiasts, technicians, circuit designers and other professionals. This is far more than just an encyclopaedia however - Ian Sinclair provides a wealth of clear explanations and practical guidance making this the ideal text for all students and practitioners of electronics who have progressed beyond the basics. The fifth edition has been updated throughout and includes new sections on SHF techniques used in satellite receivers and the practical electronics of intruder alarms and other security systems.

  • The Welding Workplace

    Technology Change and Work Management for a Global Welding Industry
    • 1st Edition
    • R Boekholt
    • English
    The welding industry is in the process of change and under pressure. New processes and new materials are being introduced in the wake of increasingly tough competition.In this book, Richard Boekholt, a senior welding consultant with vast experience and a uniquely international outlook, has compiled and summarised international practice within the field of welding developed from a European Union study 'Working Life 2000. The Welding Industry in Technological Change: a Human Resource Perspective'.The book looks at the impact of automation and explains that, while some people may feel that the use of robotics and computers will threaten welders' jobs, in fact robots and computers will help welders, not replace them. At present welders are in demand and companies are faced with difficulties in recruiting and retaining good staff. It is through improved working conditions, which are presently often environmentally unsafe with workers exposed to smoke, noise, vibration and heavy physical labour, that companies can attract and keep workers.The book emphasises the importance of managing human resources and looks at new ways of doing this. A recognition of the importance of managing human resources and looks at new ways of doing this. A recognition of the importance of training, of instructors as well as workers, will be essential to achieve the dedicated, motivated and flexible workforce necessary to work with the new technologies of the 21st century.

  • Automotive Spark-Ignited Direct-Injection Gasoline Engines

    • 1st Edition
    • F. Zhao + 2 more
    • English
    The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

  • Ultrasonic Instruments and Devices

    • 1st Edition
    • Emmanuel P. Papadakis
    • English
    Ultrasonic Instruments and Devices examines how years of ultrasound research has led to many practical inventions that are now products of use to ordinary people. Examples of personalized applications include the ultrasonograms of an unborn child, the testing of the parts of an automobile for durability, the electronics which make a cell phone work, and the meter in the gas line leading to a house. Larger concerns, such as safety of aircraft, are also discussed. A chapter is devoted to each major engineering area, and each chapter is written by one or more world-class experts in the particular area covered by the chapter. The characteristic uniting the products presented in this book is the extra effort that has been needed above and beyond research to transform the research results into practical items. One chapter of the book is devoted to essays bringing inventions out of the laboratory and onto the showroom floor. The book holds useful perspectives for entrepreneurs, researchers, managers, and consumers, and may turn out to be especially useful to professors and teachers trying to motivate students. There is some technical information in each chapter, varying from chapter to chapter, as well as a historical background.

  • Ergonomics Guidelines and Problem Solving

    • 1st Edition
    • Volume 1
    • A. Mital + 2 more
    • English
    There is an urgent need to disseminate ergonomics "know-how" to the work place. This book meets that need by providing clear guidelines and problem solving recommendations to assist the practitioner in decisions that directly protect the health, safety and well-being of the worker.The guidelines have evolved from a series of symposia on Ergonomic Guidelines and Problem Solving. Initially experts in each area selected were asked to write draft guidelines. These guidelines were circulated to participants at the symposia and to other experts for review before being comprehensively revised. In some instances these guidelines cannot be considered complete but it is important now to put some recommendations forward as guidelines. It is hoped that as new research emerges each guideline will be updated.Each guideline has been divided into two parts. Part I contains the guidelines for the practitioner and Part II provides the scientific basis or the knowledge for the guide. Such separation of the applied and theoretical content was designed to facilitate rapid incorporation of the guide into practice.The target audience for this book is the practitioner. The practitioner may be a manager, production system designer, shop supervisor, occupational health and safety professional, union representative, labor inspector or production engineer. For each of the guidelines, relevant practitioners are described.Topics covered include work space design, tool design, work-rest schedules, illumination and maintenance.

  • Current Advances in Mechanical Design and Production VII

    • 1st Edition
    • M.F. Hassan + 1 more
    • English
    The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.

  • Digital Design for Interference Specifications

    A Practical Handbook for EMI Suppression
    • 2nd Edition
    • David Terrell + 1 more
    • English
    Based on over twenty years of hands-on experience with electromagnetic interference (EMI), Digital Design for Interference Specifications provides circuit designers concrete rules that can be applied immediately to the design of new digital products. The authors' techniques emphasize EMI source suppression at the printed circuit board level and considers shielding only as a last resort. The material is written in a how-to format with brief qualitative explanations of why or how design recommendations suppress emissions or reduce susceptibility. The described approaches toward design and prevention of EMI will save manufacturers time, product cost, and enhance manufacturability. Best of all, designers will not have to be EMI gurus to implement these processes but they will definitely look like experts when the final outcome is assessed.Digital Design for Interference Specifications is a very well written book targeted directly toward circuit designers and EMI professionals. The authors built a consulting company out of the knowledge presented in the book working with a huge list of clients over the years. The material is written to directly apply to circuit designers' projects helping them save money and time on each design. The book is heavily and clearly illustrated.

  • Optimal Management of Flow in Groundwater Systems

    An Introduction to Combining Simulation Models and Optimization Methods
    • 1st Edition
    • David P. Ahlfeld + 1 more
    • English
    In the decades ahead population increases are expected to place increased stress on water resources. A substantial portion of the world's fresh water is derived from groundwater. Optimal Hydraulic Control of Groundwater Systems will provide a practical guide for implementing mathematical and computer-basedtools to aid in the management of groundwater. Drawn from the operations research literature, this book combines methods for optimization techniques to numerical models for the simulation of groundwater flow. The resulting management model provides a valuable tool for optimizing performance of groundwater systems. This volume will fill a significant gap in the technical literature on groundwater modeling and management.

  • CMOS Projects and Experiments

    Fun with the 4093 Integrated Circuit
    • 1st Edition
    • Newton C. Braga
    • English
    Full of projects based on the 4093 CMOS IC, CMOS Projects and Experiments will be of great interest to hobbyists and students. Readers will have the opportunity to learn how to apply CMOS ICs in their six primary uses while building these well-documented projects.CMOS Projects and Experiments includes instructions to build over 100 unusual and useful projects. They include audio and RF devices, lamps, LEDs, timers, alarms, inverters and much more. This book offers hobbyists and students a satisfying, practical way of learning about a hot topic in electronics today.Among the devices you can build using this book are a touch-controlled oscillator, a light-controlled oscillator, insect repellent, a metronome, a Morse code tone generator, a CW transmitter, a two-tone siren, a neon-lamp flasher, an auto turn-off relay, a turn-off timer, a touch-controlled motor, a bistable sonic relay, a coin tosser, a freezer alarm, an ultraviolet lamp, a simple fluorescent lamp inverter, a nerve stimulator, and an experimental high-voltage generator.

  • Real Time Programming 1999

    • 1st Edition
    • A.H. Frigeri + 2 more
    • English
    In 1999 the IFAC/IFIP Workshop on Real Time Programming (WRTP) joined forces with the Workshop on Active and Real-Time Database Systems (ARTDB). Both series of workshops provide an excellent forum for exchanging information on recent scientific and technological advances and practices in real time computing, a field that is becoming an essential enabling discipline of both control engineering and computer science and engineering. The annual Workshop on Real Time Programming and the bi-annual Workshop on Active and Real-time Databases Systems are intended as meetings of relatively small numbers of experts in their fields taking place as truly international events. The 1999 Workshop maintained the outstanding quality of both series, providing an opportunity to assess the state-of-the-art, to present new results, and to discuss possible lines of future developments. Primarily, it focused on software development for real time systems, real time operating systems and active and real time database systems. In particular, the technical programme of the Workshop covered latest research and developments in requirements engineering, software engineering, active and real time database systems, communication and clock synchronisation, embedded systems, formal methods, operating systems and scheduling. Out of 58 submissions from 19 countries, the International Programme Committee selected 26 regular papers and 8 reserve papers for presentation at the Workshop. Contributions come from Europe, North America, Australia, and the Far East. In addition to these, the programme also featured two world renowned keynote speakers, and a discussion panel about the state-of-the-art in the field of active real time database systems.

  • Metal Cutting

    • 4th Edition
    • Paul K. Wright + 1 more
    • English
    Metal cutting is an essential process throughout engineering design and manufacturing industries. To increase efficiency and reduce costs, it is necessary to improve understanding of the metal cutting process. This book presents a comprehensive treatment of the subject that focuses on the features of the behavior of tool and work materials that influence the efficiency of metal cutting operations. The fourth edition of this acclaimed book has been expanded and revised to include significant changes and additions to metal cutting theory, and to cover developments in tool materials and industrial practice. In particular, improvements in the understanding of the generation of heat and distribution of temperature in the cutting tool are described; a discussion of the structure, properties, and performance of newly developed ceramic tool materials and tool coatings is presented; new information of the machinability of alloys is given; and the introduction of calcium deoxidized steels and their improved machinability are assessed. Additionally, a material selection and design-based approach is expanded upon to improve industrial relevance. Metal Cutting provides invaluable information for those engaged in machining, toolmaking, and related engineering activities, and it serves as a useful introduction to the subject for students of metallurgy and engineering.

  • Rheology Modifiers Handbook

    Practical Use and Application
    • 1st Edition
    • David D. Braun + 1 more
    • English
    This is the first single-volume handbook with the information a researcher needs to select the best rheology modifiers for his/her project. Information on 20 different types of rheology modifiers manufactured by 26 companies worldwide is described. These range from Acrylic Polymers to Xanthan Gum. This handbook was written because, in the authors' experience, the selection of a rheology modifier for specific applications is an arduous task. It requires researching the technical literature of numerous suppliers, contacting them for current information and recommendations, and paring the list of candidates from hundreds to a few dozen. This book will enable readers to easily identify the best candidates for an application with a minimum investment of time.The book is divided into four sections. Part I reviews rheology fundamentals. Part II presents details on the products available from the 26 represented companies. Part III focuses on the selection of suitable rheology modifier candidates. Part IV is a formulary containing the contributions of the suppliers.

  • Hermeticity of Electronic Packages

    • 1st Edition
    • Hal Greenhouse
    • English
    This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the package—especially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to solve another. Thus, the book provides a ready reference to help deal with day to day issues as they arise.The book gathers in a single volume a great many issues previously available only in journals—or only in the experience of working engineers. How to define the ""goodness"" of a seal? How is that seal measured? How does the integrity of the seal affect circuit reliability? What is the significance of the measured integrity of the seal? What is the relationship of Residual Gas Analysis and the seal integrity? The handbook answers these questions and more, providing an analysis of nearly 100 problems representative of the wide variety of challenges that actually occur in industry today.

  • Conductive Polymers and Plastics

    In Industrial Applications
    • 1st Edition
    • Larry Rupprecht
    • Larry Rupprecht
    • English
    This book is a collection of papers by individuals in industry and academia on research and application development of conductive polymers and plastics. Conductive plastics are positioned to play an increasingly important role in affairs of mankind, specifically in the area of electrical and electronic conductivity. While general knowledge about conductive polymers and plastics has been available for many years, a true understanding of their application has only taken place in the last 3 to 4 years. This is attributed to advances in materials and processing techniques. Engineers have only begun to explore the design freedom and economic benefits of specifying conductive polymers and plastics in industrial and business applications.This book is a key reference and guide to the use of conductive polymers and plastics. It is a summary of existing technologies, but also a look at future possibilities.

  • Handbook of Ceramics Grinding & Polishing

    • 1st Edition
    • Ioan D. Marinescu + 2 more
    • Ioan D. Marinescu
    • English
    Focusing on the machining of ceramic materials such as silicon nitride, silicon carbide, and zirconia, this handbook meets the growing need in industry for a clear understanding of modern improvements in ceramic processing. The presentation is international in scope, with techniques and information represented from the USA, Japan, Germany, and the United Kingdomùcountries that have made important contributions to the field. The 20 expert chapter authors explore the challenge of reducing the costs of machining operations, a continuing problem in an industry where ceramic parts must be machined into final form to achieve a proper fit. The handbook reveals that the abrasive machining of ceramic materials will always be a requirement because of the difficulty of controlling parts dimensions at the high temperatures required in their creation. The contributors then explain the properties and characteristics of ceramics, the various types of abrasive processes, and typical tests used in the procedures. An entire section of the handbook concerns grinding tools, their conditioning, lubrication, and cooling, checking for wear on the tools, and using them efficiently. The book also examines modern honing and superfinishing tools and machines, and describes advances in the technology, as well as lapping and polishing techniques using chemical compounds and ultrasound.Ceramics is a field where more advanced products are sure to appear. Many of the products will require advanced, better-controlled processing technologies; vastly improved productivity in manufacturing; and increased product reliability. The contributors to this Handbook will assist readers in the attainment of these important goals.

Related subjects