Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • RF Engineering for Wireless Networks

    Hardware, Antennas, and Propagation
    • 1st Edition
    • Daniel M. Dobkin
    • English
    Finally, here is a single volume containing all of the engineering information needed to successfully design and implement any type of wireless network! Author Dan Dobkin covers every aspect of RF engineering necessary for wireless networks. He begins with a review of essential math and electromagnetic theory followed by thorough discussions of multiplexing, modulation types, bandwidth, link budgets, network concepts, radio system architectures, RF amplifiers, mixers and frequency conversion, filters, single-chip radio systems, antenna theory and designs, signal propagation, as well as planning and implementing wireless networks for both indoor and outdoor environments. The appendices contain such vital data as U.S., European, and Japanese technical and regulatory standards for wireless networks, measurements in wireless networks, reflection and matching of transmission lines, determining power density, and much more. No matter what type of wireless network you design—Bluetooth, UWB, or even metropolitan area network (MAN)—this book is the one reference you can’t do without!

  • Practical Centrifugal Pumps

    • 1st Edition
    • Paresh Girdhar + 1 more
    • English
    Practical Centrifugal Pumps is a comprehensive guide to pump construction, application, operation, maintenance and management issues. Coverage includes pump classifications, types and criteria for selection, as well as practical information on the use of pumps, such as how to read pump curves and cross reference. Throughout the book the focus is on best practice and developing the skills and knowledge required to recognise and solve pump problems in a structured and confident manner. Case studies provide real-world scenarios covering the design, set up, troubleshooting and maintenance of pumps.

  • Game Console Hacking

    Xbox, PlayStation, Nintendo, Game Boy, Atari and Sega
    • 1st Edition
    • Joe Grand + 1 more
    • English
    The worldwide video game console market surpassed $10 billion in 2003. Current sales of new consoles is consolidated around 3 major companies and their proprietary platforms: Nintendo, Sony and Microsoft. In addition, there is an enormous installed "retro gaming" base of Ataria and Sega console enthusiasts. This book, written by a team led by Joe Grand, author of "Hardware Hacking: Have Fun While Voiding Your Warranty", provides hard-core gamers with they keys to the kingdom: specific instructions on how to crack into their console and make it do things it was never designed to do. By definition, video console game players like to have fun. Most of them are addicted to the adrenaline rush associated with "winning", and even more so when the "winning" involves beating the system by discovering the multitude of "cheats" built into most video games. Now, they can have the ultimate adrenaline rush---actually messing around with the soul of the machine and configuring it to behave exactly as the command. This book builds on the motto of "Have Fun While Voiding Your Warranty" and will appeal to the community of hardware geeks who associate unscrewing the back of their video console with para-jumping into the perfect storm.

  • The Circuit Designer's Companion

    • 2nd Edition
    • Tim Williams
    • English
    Tim Williams' Circuit Designer's Companion provides a unique masterclass in practical electronic design that draws on his considerable experience as a consultant and design engineer. As well as introducing key areas of design with insider's knowledge, Tim focuses on the art of designing circuits so that every production model will perform its specified function – and no other unwanted function - reliably over its lifetime. The combination of design alchemy and awareness of commercial and manufacturing factors makes this an essential companion for the professional electronics designer. Topics covered include analog and digital circuits, component types, power supplies and printed circuit board design. The second edition includes new material on microcontrollers, surface mount processes, power semiconductors and interfaces, bringing this classic work up to date for a new generation of designers.

  • Machinery Component Maintenance and Repair

    • 3rd Edition
    • Volume 3
    • English
    The names Bloch and Geitner are synonymous with machinery maintenance and reliability for process plants. They save companies like Dow and Equilon millions of dollars a year by extending the life of rotating machinery in their plants. Extending the life of existing machinery is the name of the game in the process industries, not designing new machinery. This series by Bloch and Geitner was the first and is still the best, most comprehensive source for doing just that.This classic text on reliability has been revised to include all new material on risk management, pre-grouted bases, laser alignment, cartridge seals maintenance, and many other topics which have undergone many developments since the last revision.

  • Advanced Control of Chemical Processes

    • 1st Edition
    • Frank Allgower
    • Furong Gao
    • English
    This two volume set contains papers which describe the recent developments in advanced control of chemical processes and related industries. New adaptive, statistical, model-based control and artificial intelligence techniques and their applications are detailed in several papers. The problem of implementation of control algorithms on a digital computer is also considered.

  • The Electrical Engineering Handbook

    • 1st Edition
    • Wai Kai Chen
    • English
    The Electrical Engineer's Handbook is an invaluable reference source for all practicing electrical engineers and students. Encompassing 79 chapters, this book is intended to enlighten and refresh knowledge of the practicing engineer or to help educate engineering students. This text will most likely be the engineer’s first choice in looking for a solution; extensive, complete references to other sources are provided throughout. No other book has the breadth and depth of coverage available here. This is a must-have for all practitioners and students! The Electrical Engineer's Handbook provides the most up-to-date information in: Circuits and Networks, Electric Power Systems, Electronics, Computer-Aided Design and Optimization, VLSI Systems, Signal Processing, Digital Systems and Computer Engineering, Digital Communication and Communication Networks, Electromagnetics and Control and Systems.About the Editor-in-Chief…Wai-... Chen is Professor and Head Emeritus of the Department of Electrical Engineering and Computer Science at the University of Illinois at Chicago. He has extensive experience in education and industry and is very active professionally in the fields of circuits and systems. He was Editor-in-Chief of the IEEE Transactions on Circuits and Systems, Series I and II, President of the IEEE Circuits and Systems Society and is the Founding Editor and Editor-in-Chief of the Journal of Circuits, Systems and Computers. He is the recipient of the Golden Jubilee Medal, the Education Award, and the Meritorious Service Award from the IEEE Circuits and Systems Society, and the Third Millennium Medal from the IEEE. Professor Chen is a fellow of the IEEE and the American Association for the Advancement of Science.

  • Practical Troubleshooting of Electrical Equipment and Control Circuits

    • 1st Edition
    • Mark Brown + 2 more
    • English
    There is a large gap between what you learn in college and the practical knowhow demanded in the working environment, running and maintaining electrical equipment and control circuits. Practical Troubleshooting of Electrical Equipment and Control Circuits focuses on the hands-on knowledge and rules-of-thumb that will help engineers and employers by increasing knowledge and skills, leading to improved equipment productivity and reduced maintenance costs. Practical Troubleshooting of Electrical Equipment and Control Circuits will help engineers and technicians to identify, prevent and fix common electrical equipment and control circuits. The emphasis is on practical issues that go beyond typical electrical principles, providing a tool-kit of skills in solving electrical problems, ranging from control circuits to motors and variable speed drives. The examples in the book are designed to be applicable to any facility.

  • Chemical Process Safety

    Learning from Case Histories
    • 3rd Edition
    • Roy E. Sanders
    • English
    Gives insight into eliminating specific classes of hazards, while providing real case histories with valuable messages. There are practical sections on mechanical integrity, management of change, and incident investigation programs, along with a long list of helpful resources. New chapter in this edition covers accidents involving compressors, hoses and pumps.

  • Dynamic Fracture

    • 1st Edition
    • K. Ravi-Chandar
    • English
    Dynamic fracture in solids has attracted much attention for over a century from engineers as well as physicists due both to its technological interest and to inherent scientific curiosity. Rapidly applied loads are encountered in a number of technical applications. In some cases such loads might be applied deliberately, as for example in problems of blasting, mining, and comminution or fragmentation; in other cases, such dynamic loads might arise from accidental conditions. Regardless of the origin of the rapid loading, it is necessary to understand the mechanisms and mechanics of fracture under dynamic loading conditions in order to design suitable procedures for assessing the susceptibility to fracture. Quite apart from its repercussions in the area of structural integrity, fundamental scientific curiosity has continued to play a large role in engendering interest in dynamic fracture problems

  • Practical Telecommunications and Wireless Communications

    For Business and Industry
    • 1st Edition
    • Edwin Wright + 1 more
    • English
    The technololgy and structure of telecommunications networks has changed dramatically over the past few years. These developments have changed the equipment you purchase, the services you use, the providers you can choose, and the methods available for transporting data. Practical Telecommunications and Wireless Communications for Engineers and Technicians will be of particular benefit to those who want to take full advantage of the latest and most effective telecommunications technology and services.This book provides a grounding in the fundamentals of modern telecommunications systems in use in industrial, engineering and business settings. From networking for control systems to the use of Wireless LANs for enhanced on-site communications systems.This is a cutting-edge book on the fundamentals of telecommunications for anyone looking for a complete understanding of the essentials of the terms, jargon and technologies used. It has been designed for those who require a basic grounding in telecommunications for industrial, engineering and business applications.

  • Black Hat Physical Device Security: Exploiting Hardware and Software

    • 1st Edition
    • Drew Miller
    • English
    Black Hat, Inc. is the premier, worldwide provider of security training, consulting, and conferences. In Black Hat Physical Device Security: Exploiting Hardware and Software, the Black Hat experts show readers the types of attacks that can be done to physical devices such as motion detectors, video monitoring and closed circuit systems, authentication systems, thumbprint and voice print devices, retina scans, and more. The Black Hat Briefings held every year in Las Vegas, Washington DC, Amsterdam, and Singapore continually expose the greatest threats to cyber security and provide IT mind leaders with ground breaking defensive techniques. There are no books that show security and networking professionals how to protect physical security devices. This unique book provides step-by-step instructions for assessing the vulnerability of a security device such as a retina scanner, seeing how it might be compromised, and taking protective measures. The book covers the actual device as well as the software that runs it. By way of example, a thumbprint scanner that allows the thumbprint to remain on the glass from the last person could be bypassed by pressing a "gummy bear" piece of candy against the glass so that the scan works against the last thumbprint that was used on the device. This is a simple example of an attack against a physical authentication system.

  • Introduction to Naval Architecture

    Formerly Muckle's Naval Architecture for Marine Engineers
    • 4th Edition
    • E. C. Tupper
    • English
    The fundamental characteristics of a ship’s design, and how they affect its behaviour at sea are of crucial importance to many people involved in the design, construction, operation, and maintenance of all marine vessels. Naval architects and those working in ship design need to understand these principles in depth. Marine engineers must likewise recognise the degree to which their activities are influenced and bounded by these principles. Finally, senior crew – both Ship’s Engineers and Commanders – need an understanding of the principles of naval architecture in order to properly fulfil their duties. This book offers a clear and concise introduction to the subject and is of great value to both students and practising professionals in all of the above fields.

  • Performance and Durability Assessment:

    Optical Materials for Solar Thermal Systems
    • 1st Edition
    • Michael Kohl + 3 more
    • English
    2 real examples demonstrate how to obtain the service life of solar collector systems Durable, providing fundamentals that will continue to be valuable over the next 5-10 years Lighting a pathway to the commercialisation of solar products Solar devices lose their performance over time. The rate of degradation controls the service life of these devices. The essential concepts used to assess durability and performance of two specific solar collector systems are described, enabling researchers to assess durability in other solar devices. The examples of modelling, testing and performance measurements give researchers a how-to approach to reach crucial service lifetime predictions. Achieving successful and sustainable commercialisation of solar products relies on the fulfilment of 2 further criteria and these are also discussed. The methodology of service lifetime predictions (SLP), which is explained in detail in the book, is crucially needed in other solar technologies and is generally applicable to a wide variety of materials, components and systems used in other solar, biomedical, aerospace, electronic and coatings technologies.

  • Graphics with Mathematica

    Fractals, Julia Sets, Patterns and Natural Forms
    • 1st Edition
    • Chonat Getz + 1 more
    • English
    In this book we generate graphic images using the software Mathematica thus providing a gentle and enjoyable introduction to this rather technical software and its graphic capabilities. The programs we use for generating these graphics are easily adaptable to many variations.These graphic images are enhanced by introducing a variety of different coloring techniques.Detailed instructions are given for the construction of some interesting 2D and 3D fractals using iterated functions systems as well as the construction of many different types of Julia sets and parameter sets such as the Mandelbrot set.The mathematics underlying the theory of Iterated function systems and Julia sets is given an intuitive explanation, and references are provided for more detailed study.

  • Physically Based Rendering

    From Theory to Implementation
    • 2nd Edition
    • Matt Pharr + 1 more
    • English
    Physically Based Rendering, Second Edition, describes both the mathematical theory behind a modern photorealistic rendering system as well as its practical implementation. A method known as literate programming combines human-readable documentation and source code into a single reference that is specifically designed to aid comprehension. The result is a stunning achievement in graphics education. Through the ideas and software in this book, you will learn to design and employ a full-featured rendering system for creating stunning imagery. This new edition greatly refines its best-selling predecessor by streamlining all obsolete code as well as adding sections on parallel rendering and system design; animating transformations; multispectral rendering; realistic lens systems; blue noise and adaptive sampling patterns and reconstruction; measured BRDFs; and instant global illumination, as well as subsurface and multiple-scattering integrators. These updates reflect the current state-of-the-art technology, and along with the lucid pairing of text and code, ensure the book's leading position as a reference text for those working with images, whether it is for film, video, photography, digital design, visualization, or gaming.

  • Multiprocessor Systems-on-Chips

    • 1st Edition
    • Ahmed Jerraya + 1 more
    • English
    Modern system-on-chip (SoC) design shows a clear trend toward integration of multiple processor cores on a single chip. Designing a multiprocessor system-on-chip (MPSOC) requires an understanding of the various design styles and techniques used in the multiprocessor. Understanding the application area of the MPSOC is also critical to making proper tradeoffs and design decisions.Multiproce... Systems-on-Chips covers both design techniques and applications for MPSOCs. Design topics include multiprocessor architectures, processors, operating systems, compilers, methodologies, and synthesis algorithms, and application areas covered include telecommunications and multimedia. The majority of the chapters were collected from presentations made at the International Workshop on Application-Specific Multi-Processor SoC held over the past two years. The workshop assembled internationally recognized speakers on the range of topics relevant to MPSOCs. After having refined their material at the workshop, the speakers are now writing chapters and the editors are fashioning them into a unified book by making connections between chapters and developing common terminology.

  • Advances in Heat Transfer

    • 1st Edition
    • Volume 38
    • James P. Hartnett
    • Young I. Cho + 2 more
    • English
    Provides an overview of review articles on topics of current interest Bridges the gap between academic researchers and practitioners in industry A long-running and prestigious series Advances in Heat Transfer fills the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than in journals or texts. The articles, which serve as a broad review for experts in the field, will also be of great interest to non-specialists who need to keep up to date with the results of the latest research. It is essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer, graduate schools or industry.

  • Analog and Digital Circuits for Electronic Control System Applications

    Using the TI MSP430 Microcontroller
    • 1st Edition
    • Jerry Luecke
    • English
    Today’s control system designers face an ever-increasing “need for speed” and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them.This practical text covers the latest techniques in microcontroller-base... control system design, making use of the popular MSP430 microcontroller from Texas Instruments.The book covers all the circuits of the system, including:· Sensors and their output signals· Design and application of signal conditioning circuits· A-to-D and D-to-A circuit design· Operation and application of the powerful and popular TI MSP430 microcontroller· Dat... transmission circuits· System power control circuitryWritten by an experienced microcontroller engineer and textbook author, the book is lavishly illustrated and includes numerous specific circuit design examples, including a fully tested and documented hands-on project using the MSP430 that makes use of the principles described. For students, engineers, technicians, and hobbyists, this practical text provides the answers you need to design modern control systems quickly and easily.

  • Starting Electronics

    • 3rd Edition
    • Keith Brindley
    • English
    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material includes sections on transducers and more practical examples of digital ICs.

  • Introduction to Microcontrollers

    Architecture, Programming, and Interfacing for the Freescale 68HC12
    • 2nd Edition
    • G. Jack Lipovski
    • English
    Introduction to Microcontrollers is a comprehensive, introductory text/reference for electrical and computer engineers and students with little experience with a high-level programming language. It systematically teaches the programming of a microcontroller in assembly language, as well as C and C++. This books also covers the principles of good programming practice through top-down design and the use of data structures. It is suitable as an introductory text for a first course on microcomputers that demonstrates what a small computer can do.

  • Digital Signal Processing and Applications

    • 2nd Edition
    • Dag Stranneby
    • English
    A uniquely practical DSP text, this book gives a thorough understanding of the principles and applications of DSP with a minimum of mathematics, and provides the reader with an introduction to DSP applications in telecoms, control engineering and measurement and data analysis systems.The new edition contains: Expanded coverage of the basic concepts to aid understanding New sections on filter sysnthesis, control theory and contemporary topics of speech and image recognition Full solutions to all questions and exercises in the book Assuming the reader already has some prior knowledge of signal theory, this textbook will be highly suitable for undergraduate and postgraduate students in electrical and electronic engineering taking introductory and advanced courses in DSP, as well as courses in communications and control systems engineering. It will also prove an invaluable introduction to DSP and its applications for the professional engineer.

  • The Practical Pumping Handbook

    • 1st Edition
    • Ross C Mackay
    • English
    The Practical Pumping Handbook is a practical account of pumping, piping and seals starting with basics and providing detailed but accessible information on all aspects of the pumping process and what can go wrong with it. Written by an acknowledged expert with years of teaching experience in the practical understanding of pumps and systems.

  • Failure Criteria in Fibre-Reinforced-Polymer Composites

    • 1st Edition
    • M. Hinton + 2 more
    • English
    Fiber reinforced polymer composites are an extremely broad and versatile class of material.Their high strength coupled with lightweight leads to their use wherever structural efficiency is at a premium. Applications can be found in aircraft, process plants, sporting goods and military equipment. However they are heterogeneous in construction and antisotropic, which makes making strength prediction extremely difficult especially compared to that of a metal. This book brings together the results of a 12year worldwide failure exercise encompassing 19 theories in a single volume. Each contributor describes their own theory and employs it to solve 14 challenging problems. The accuracy of predictions and the performance of the theories are assessed and recommendations made on the uses of the theories in engineering design.All the necessary information is provided for the methodology to be readily employed for validating and benchmarking new theories as they emerge.

  • Software Design for Engineers and Scientists

    • 1st Edition
    • John Allen Robinson
    • English
    Software Design for Engineers and Scientists integrates three core areas of computing:. Software engineering - including both traditional methods and the insights of 'extreme programming'. Program design - including the analysis of data structures and algorithms. Practical object-oriented programmingWithout assuming prior knowledge of any particular programming language, and avoiding the need for students to learn from separate, specialised Computer Science texts, John Robinson takes the reader from small-scale programing to competence in large software projects, all within one volume. Copious examples and case studies are provided in C++.The book is especially suitable for undergraduates in the natural sciences and all branches of engineering who have some knowledge of computing basics, and now need to understand and apply software design to tasks like data analysis, simulation, signal processing or visualisation. John Robinson introduces both software theory and its application to problem solving using a range of design principles, applied to the creation of medium-sized systems, providing key methods and tools for designing reliable, efficient, maintainable programs. The case studies are presented within scientific contexts to illustrate all aspects of the design process, allowing students to relate theory to real-world applications.

  • Data Hiding Fundamentals and Applications

    Content Security in Digital Multimedia
    • 1st Edition
    • Husrev T. Sencar + 2 more
    • English
    Multimedia technologies are becoming more sophisticated, enabling the Internet to accommodate a rapidly growing audience with a full range of services and efficient delivery methods. Although the Internet now puts communication, education, commerce and socialization at our finger tips, its rapid growth has raised some weighty security concerns with respect to multimedia content. The owners of this content face enormous challenges in safeguarding their intellectual property, while still exploiting the Internet as an important resource for commerce. Data Hiding Fundamentals and Applications focuses on the theory and state-of-the-art applications of content security and data hiding in digital multimedia. One of the pillars of content security solutions is the imperceptible insertion of information into multimedia data for security purposes; the idea is that this inserted information will allow detection of unauthorized usage.

  • Synthetic Instruments: Concepts and Applications

    • 1st Edition
    • Chris Nadovich
    • English
    The way electronic instruments are built is changing in a deeply fundamental way. It is making an evolutionary leap to a new method of design that is being called synthetic instruments. This new method promises to be the most significant advance in electronic test and instrumentation since the introduction of automated test equipment (ATE). The switch to synthetic instruments is beginning now, and it will profoundly affect all test and measurement equipment that will be developed in the future. Synthetic instruments are like ordinary instruments in that they are specific to a particular measurement or test. They might be a voltmeter that measures voltage, or a spectrum analyzer that measures spectra. The key, defining difference is this: synthetic instruments are implemented purely in software that runs on general purpose, non-specific measurement hardware with a high speed A/D and D/A at its core. In a synthetic instrument, the software is specific; the hardware is generic. Therefore, the "personality" of a synthetic instrument can be changed in an instant. A voltmeter may be a spectrum analyzer a few seconds later, and then become a power meter, or network analyzer, or oscilloscope. Totally different instruments are implemented on the same hardware and can be switched back and forth in the blink of an eye. This book explains the basics of synthetic instrumentation for the many people that will need to quickly learn about this revolutionary way to design test equipment. This book attempts to demystify the topic, cutting through, commercial hype, and obscure, vague jargon, to get to the heart of the technique. It reveals the important basic underlying concepts, showing people how the synthetic instrument design approach, properly executed, is so effective in creating nstrumentation that out performs traditional approaches to T&M and ATE being used today.

  • WDM Technologies: Optical Networks

    • 1st Edition
    • Achyut K. Dutta + 2 more
    • English
    Internet information (which is doubling every six months) travels through optical fibers. Today, optical fibers are being installed where a single fiber has the ability to carry information as much as 200 times faster than was possible just five years ago. This revolutionary capability is being achieved with technology known as wavelength division multiplexing WDM). WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. The communications industry is at the onset of new expansion of WDM technology necessary to meet the new demand for bandwidth. WDM Technologies: Optical Networks deals with the Networks facet of this field (present and future).

  • Practical E-Manufacturing and Supply Chain Management

    • 1st Edition
    • Gerhard Greeff + 1 more
    • English
    New technologies are revolutionising the way manufacturing and supply chain management are implemented. These changes are delivering manufacturing firms the competitive advantage of a highly flexible and responsive supply chain and manufacturing system to ensure that they meet the high expectations of their customers, who, in today's economy, demand absolutely the best service, price, delivery time and product quality.To make e-manufacturing and supply chain technologies effective, integration is needed between various, often disparate systems. To understand why this is such an issue, one needs to understand what the different systems or system components do, their objectives, their specific focus areas and how they interact with other systems. It is also required to understand how these systems evolved to their current state, as the concepts used during the early development of systems and technology tend to remain in place throughout the life-cycle of the systems/technology. This book explores various standards, concepts and techniques used over the years to model systems and hierarchies in order to understand where they fit into the organization and supply chain. It looks at the specific system components and the ways in which they can be designed and graphically depicted for easy understanding by both information technology (IT) and non-IT personnel.Without a good implementation philosophy, very few systems add any real benefit to an organization, and for this reason the ways in which systems are implemented and installation projects managed are also explored and recommendations are made as to possible methods that have proven successful in the past. The human factor and how that impacts on system success are also addressed, as is the motivation for system investment and subsequent benefit measurement processes.Finally, the vendor/user supply/demand within the e-manufacturing domain is explored and a method is put forward that enables the reduction of vendor bias during the vendor selection process.The objective of this book is to provide the reader with a good understanding regarding the four critical factors (business/physical processes, systems supporting the processes, company personnel and company/personal performance measures) that influence the success of any e-manufacturing implementation, and the synchronization required between these factors.

  • Joining of Materials and Structures

    From Pragmatic Process to Enabling Technology
    • 1st Edition
    • Robert W. Messler
    • English
    Joining of Materials and Structures is the first and only complete and highly readable treatment of the options for joining conventional materials and the structures they comprise in conventional and unconventional ways, and for joining emerging materials and structures in novel ways. Joining by mechanical fasteners, integral designed-or formed-in features, adhesives, welding, brazing, soldering, thermal spraying, and hybrid processes are addressed as processes and technologies, as are issues associated with the joining of metals, ceramics (including cement and concrete) glass, plastics, and composites (including wood), as well as, for the first time anywhere, living tissue. While focused on materials issues, issues related to joint design, production processing, quality assurance, process economics, and joint performance in service are not ignored. The book is written for engineers, from an in-training student to a seasoned practitioner by an engineer who chose to teach after years of practice. By reading and referring to this book, the solutions to joining problems will be within one’s grasp.Key Features:· Unprecede... coverage of all joining options (from lashings to lasers) in 10 chapters· Uniquely complete coverage of all materials, including living tissues, in 6 chapters· Richly illustrated with 76 photographs and 233 illustrations or plots· Practice Questions and Problems for use as a text of for reviewing to aid for comprehension

  • Plastic Product Material and Process Selection Handbook

    • 1st Edition
    • Dominick V Rosato + 2 more
    • English
    This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book.

  • Mitsubishi FX Programmable Logic Controllers

    Applications and Programming
    • 2nd Edition
    • John Ridley
    • English
    John Ridley provides comprehensive information on usage, design and programming for the Mitsubishi FX range of programmable logic controllers, in this step-by-step, practical guide.Professional engineers working with Mitsubishi PLCs, as well as students following courses focusing on these devices, will find this book to be an essential resource for this popular PLC family. Numerous worked examples and assignments are included, to reinforce the practical application of these devices, widely used in industry.Fully updated throughout from coverage of the FX PLC to now cover the FxN PLC family from Mitsubishi, John Ridley also focuses on use of the Fx2N - the most powerful and diverse in function of this PLC group. The second edition contains advanced topics along with numerous ladder diagrams and illustrative examples.

  • Fatigue Testing and Analysis

    Theory and Practice
    • 1st Edition
    • Yung-Li Lee + 3 more
    • English
    Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods.

  • Physically Based Rendering

    From Theory to Implementation
    • 1st Edition
    • Pat Hanrahan + 2 more
    • English
    Rendering is a crucial component of computer graphics— the conversion of a description of a 3D scene into an image for display. Algorithms for animation, geometric modeling, and texturing all must feed their results through some sort of rendering process for the results to be visible in an image. Focusing on realistic images, physically based rendering incorporates ideas from a range of disciplines, including physics, biology, psychology, cognitive science, and mathematics. This book presents the algorithms of modern photorealistic rendering and follows step by step the creation of a complete rendering system. As each new rendering concept is introduced it is also shown implemented in code—there is no better way to understand the subtle and complex process of rendering. The code itself is highly readable, written in the literate programming style that mixes text describing the system with the code that implements it. The result is a stunning achievement in graphics education for students, professionals, and researchers.

  • Sewers: Replacement and New Construction

    • 1st Edition
    • Geoffrey F Read
    • English
    Sewers: Replacement and New Construction is a detailed guide to the management and construction of new sewer systems. Different construction and replacement techniques, such as jacking, moling and ramming, are described and evaluated.The importance of proper site preparation and management is emphasised, and detailed guidance is given to pre-construction investigation as well as to managing traffic and public relations during the construction period.Geoffrey Read, one of the UK's leading experts on sewer construction, has compiled the most detailed account available on this subject, using material from civil engineers, consultants and his own wide experience.

  • Modeling and Problem Solving Techniques for Engineers

    • 1st Edition
    • Laszlo Horvath + 1 more
    • English
    This book offers a comprehensive survey of computer methods for engineers that know the importance of the future applications of these techniques but can not understand them. Typically, design and production engineers can find books for specialists but they need one that helps them to understand the mystic world of advanced computer aided engineering activitites. This book is intended to fill this gap. Mechanical engineers will find basic theory and the value of competitive computer-aided engineering methods in the proposed book. The book will be written in a style free of computer specialists' jargon. The topic of the book is computer methodology for engineers, including conceptual design, detailed design, styling, modeling, analysis, simulation, manufacturing planning, 3D graphic visualization. The aspect is of the engineer who is in dialog connection with computer procedures and is working in a human-computer system where a group of engineers collaborates using an advanced concurrent engineering environment.The book will include chapters on: computing for engineering; computer representation; computing methods: creating computer representations; application of computer representations; engineering activities in the global computer environment; and opinions of some potentials. The audience for this book consists of engineers, who must be familiar with computer methods and should be able to apply them in their work, as well as students who are not involved in computer-related courses but need an understanding of the world of computer-aided engineering to solve engineering tasks. Potential readers may be any individuals who need to understand computer-aided engineering methods, especially engineering modeling.

  • Environmental Contaminants

    Assessment and Control
    • 1st Edition
    • Daniel A. Vallero
    • English
    Environmental Contaminants serves as a tool for environmental professionals to produce technically sound and reproducible scientific evidence. It identifies ways to clean up environmental problems in air, water, soil, sediment and living systems. Ethical issues, environmental management, and professionalism, and environmental economic problems are illustrated to assist the reader in understanding and applying quantitative analysis of environmental problems.

  • Lean TPM

    A Blueprint for Change
    • 1st Edition
    • Dennis McCarthy + 1 more
    • English
    Merging the benefits of two well-known methodolgies, Lean Thinking and Total Productive Maintenance, Lean TPM shows how to secure increased manufacturing efficiency.Based on their experienc of working with organisations that have successfully achieved outstanding performance, McCarthy and Rich provide the tools and techniques that convert strategic vision into practical reality. Lean TPM accelerates the benefits of continuous improvement activities within any manufacturing environment by challenging wasteful working practices, releasing the potential of the workforce, targeting effectiveness and making processes work as planned. * Unites world-class manufacturing, Lean Thinking and Total Productive Maintenance (TPM)* Shows how to achieve zero breakdowns* Optimises processes to deliver performance and new products efficiently* Delivers benefit from continuous improvement activities quicklyLean TPM provides a single change agenda for organisations. It will help to develop robust supply chain relationships and to optimise the value generating process. Supported by an integrated route map and comprehensive benchmark data, this book enables engineers, technicians and managers to explore this potent technique fully.

  • Practical Grounding, Bonding, Shielding and Surge Protection

    • 1st Edition
    • G Vijayaraghavan + 2 more
    • English
    This book will allow you to gain practical skills and know-how in grounding, bonding, lightning & surge protection. Few topics generate as much controversy and argument as that of grounding and the associated topics of surge protection, shielding and lightning protection of electrical and electronic systems. Poor grounding practice can be the cause of continual and intermittent difficult-to-diagnos... problems in a facility. This book looks at these issues from a fresh yet practical perspective and enables you to reduce expensive downtime on your plant and equipment to a minimum by correct application of these principles.Learning outcomes:* Apply the various methods of grounding electrical systems* Detail the applicable national Standards* Describe the purposes of grounding and bonding* List the types of systems that cannot be grounded* Describe what systems can be operated ungrounded* Correctly shield sensitive communications cables from noise and interference* Apply practical knowledge of surge and transient protection* Troubleshoot and fix grounding and surge problems* Design, install and test an effective grounding system for electronic equipment* Understand lightning and how to minimize its impact on your facility* Protect sensitive equipment from lightning

  • Network Recovery

    Protection and Restoration of Optical, SONET-SDH, IP, and MPLS
    • 1st Edition
    • Jean-Philippe Vasseur + 2 more
    • English
    Network Recovery is the first book to provide detailed information on protecting and restoring communication networks, and it sets a sky-high standard for any that may follow. Inside, you’ll learn specific techniques that work at each layer of the networking hierarchy—including optical, SONET-SDH, IP, and MPLS—as well as multi-layer escalation strategies that offer the highest level of protection. The authors begin with an incisive introduction to the issues that define the field of network protection and restoration, and as the book progresses they explain everything you need to know about the relevant protocols, providing theoretical analyses wherever appropriate. If you work for a network-dependent organization, large or small, you’ll want to keep Network Recovery within reach at all times.

  • Practical Hazops, Trips and Alarms

    • 1st Edition
    • David Macdonald
    • English
    Do you have trips and safety interlocks in your plant? Are they good enough or are they perhaps over-designed and much more expensive than necessary? Are you or your company aware of how Hazard Studies should define risk reduction requirements? Are you actually using Hazard Studies at all? The answer is the integrated approach to safety management. New international standards combined with well-proven hazard study methods can improve safety management in your company. Practical Hazops, Trips and Alarms for Engineers and Technicians describes the role of hazard studies in risk management, and then proceeds with basic training in Hazop techniques. A number of practical exercises support the reference information and allow you to test your understanding of the material in the book. This book aims to bridge the discipline gap between hazard studies and the provision of safety-related alarm and trip systems. It provides training in hazard and operability methods (Hazops) and in the principles of safety instrumented systems as defined by international standard IEC 61508.

  • Practical Power Distribution for Industry

    • 1st Edition
    • Jan De Kock + 1 more
    • English
    The book provides technical know-how not covered by most universities and colleges in a subject that is central to the roles of many electrical engineers in industry, focusing on switchgear, power cables, power factor correction, and network studies.

  • Practical Machinery Safety

    • 1st Edition
    • David Macdonald
    • English
    Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs.

  • Implementing 802.11, 802.16, and 802.20 Wireless Networks

    Planning, Troubleshooting, and Operations
    • 1st Edition
    • Ron Olexa
    • English
    This is not another book about installing a home or “hobby” Wi-Fi system. Instead, this book shows you how to plan, design, install, and operate WLAN systems in businesses, institutions, and public settings such as libraries and hotels. In other words, this book is packed with serious information for serious professionals responsible for implementing robust, high performance WLANs covering areas as small as a coffee shop or as large as entire communities. Ron Olexa provides a solid foundation in RF/wireless theory as it applies to WLANs. His detailed, thorough coverage of propagation at GHz frequencies helps you understand the mysteries of WLAN coverage (such as how it can change from season to season due to foliage). You’ll also learn about antenna radiation patterns and gain so you can design you WLAN to have the coverage you need without causing interference to (or suffering interference from) other WLANs.

  • Practical Machinery Vibration Analysis and Predictive Maintenance

    • 1st Edition
    • Cornelius Scheffer + 1 more
    • English
    Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted.

  • An Intelligent System for Engine Tribological Design

    • 1st Edition
    • Volume 46
    • Xiangju Zhang + 1 more
    • English
    The internal combustion is widely used as a power source in engineering. As the demands placed upon engines have increased, tribology has come to play an increasingly important role in their development.This book is a creative combination of intelligent design technology and the tribological design of engines: engine tribology, information science, artificial intelligence, non numerical algorithms, modern design technology and dynamics to propose new methodology and technology for tribological engine design. It not only presents an effective approach to l engine design but also explores a new pattern for research and l design methodology.

  • Real-Time Digital Signal Processing

    Based on the TMS320C6000
    • 1st Edition
    • Nasser Kehtarnavaz
    • English
    Digital Signal Processing has undergone enormous growth in usage/implementation in the last 20 years and many engineering schools are now offering real-time DSP courses in their undergraduate curricula. Our everyday lives involve the use of DSP systems in things such as cell phones and high-speed modems; Texas Instruments has introduced the TMS320C6000 DSP processor family to meet the high performance demands of today’s signal processing applications.This book provides the know-how for the implementation and optimization of computationally intensive signal processing algorithms on the Texas Instruments family of TMS320C6000 DSP processors. It is organized in such a way that it can be used as the textbook for DSP lab courses offered at many engineering schools or as a self-study/reference for those familiar with DSP but not this family of processors.This book provides a restructured, modified, and condensed version of the information in more than twenty TI manuals so that one can learn real-time DSP implementations on the C6000 family in a structured course, within one semester. Each chapter is followed by an appropriate lab exercise to provide the hands-on lab material for implementing appropriate signal processing functions.

  • Ship Design and Performance for Masters and Mates

    • 1st Edition
    • Bryan Barrass
    • English
    Ship Design and Performance for Masters and Mates is a quick to use, comprehensive reference that brings the key information needed to understand ship design and performance at your fingertips. The book covers all key aspects of ship design and performance, supplemented by exam revision one-liners. It does not assume detailed theoretical knowledge, but rather builds up the reader's understanding of how the elements of ship design influence and impact on its performance, and how the engineer, crew and operators can maximise the performance of their vessel in operation. Written by an experienced marine engineering consultant, author and lecturer, this book presents key facts and formulas, backed up throughout by relevant theory, illustrations and photographs. It includes examples of modern ship-types and their general particulars and covers topics ranging from design and power coefficients to types of ship resistance; types of ship speed; types of power on ships; designing a ship's propeller; details of maximum ship squats; the phenomena of interaction of ships in confined waters; mechanisms for improving ship handling; and improvements in power output. This book is an essential introduction and reference for students and those newly at sea, as well as for anyone involved with ship design, marine engineering, naval architecture, and the day-to-day operation of ships in port.

  • Wireless Sensor Networks

    An Information Processing Approach
    • 1st Edition
    • Feng Zhao + 1 more
    • English
    Information processing in sensor networks is a rapidly emerging area of computer science and electrical engineering research. Because of advances in micro-sensors, wireless networking and embedded processing, ad hoc networks of sensor are becoming increasingly available for commercial, military, and homeland security applications. Examples include monitoring (e.g., traffic, habitat, security), industrail sensing and diagnostics (e.g., factory, appliances), infrastructures (i.e., power grid, water distribution, waste disposal) and battle awareness (e.g., multi-target tracking). This book introduces practitioners to the fundamental issues and technology constraints concerning various aspects of sensor networks such as information organization, querying, routing, and self-organization using concrete examples and does so by using concrete examples from current research and implementation efforts.

  • The Theory and Practice of Worm Gear Drives

    • 1st Edition
    • Ilés Dudás
    • English
    Worm gears are special gears that resemble screws, and can be used to drive other gears. Worm gears, enable two non-touching shafts in a machine to mesh (join) together. This publication, unique in that it combines both theoretical and practical design aspects, including the latest results of research and development, provides detailed treatment of the theory and production of worm drives, as well as the overarching subject of production geometry of helicoidal surfaces.Included are mathematical models for a number of practical applications; a description of dressing equipment required; treatment of inspection and measurement; the use of intelligent systems; worm gearing for power transmission; selection criteria.

Related subjects