Journals in Chemical engineering

The Chemical Engineering collection offers content that combines research with foundational knowledge, practical information, methods and case studies, in a variety of areas, including biochemical engineering, catalysis, filtration & separation, colloids & surface chemistry, electrochemical engineering, energy & transport processes, materials chemistry, metallurgy, process engineering, safety & reliability, sustainable & environmental, to help chemical engineers address the challenges we face today, including climate change, global warming, health and nutrition, and alternative energy.

Books Journals

Journal of Non-Newtonian Fluid Mechanics

ISSN: 0377-0257
5 Year impact factor: 2.6
Impact factor: 2.7

The Journal of Non-Newtonian Fluid Mechanics publishes research on flowing soft matter systems. Submissions in all areas of flowing complex fluids are welcomed, including polymer melts and solutions, suspensions, colloids, surfactant solutions, biological fluids, gels, liquid crystals and granular materials. Flow problems relevant to microfluidics, lab-on-a-chip, nanofluidics, biological flows, geophysical flows, industrial processes and other applications are of interest.Subjects considered suitable for the journal include the following (not necessarily in order of importance):Theoretical, computational and experimental studies of naturally or technologically relevant flow problems where the non-Newtonian nature of the fluid is important in determining the character of the flow. We seek in particular studies that lend mechanistic insight into flow behavior in complex fluids or highlight flow phenomena unique to complex fluids. Examples includeInstabilities, unsteady and turbulent or chaotic flow characteristics in non-Newtonian fluids,Multiphase flows involving complex fluids,Problems involving transport phenomena such as heat and mass transfer and mixing, to the extent that the non-Newtonian flow behavior is central to the transport phenomena,Novel flow situations that suggest the need for further theoretical study,Practical situations of flow that are in need of systematic theoretical and experimental research. Such issues and developments commonly arise, for example, in the polymer processing, petroleum, pharmaceutical, biomedical and consumer product industries.This list is meant to be representative, not exhaustive.Mathematical analysis of equations relevant to non-Newtonian flowsNumerical methods suited to problems in flowing complex fluidsDevelopment of rheological constitutive equations for non-Newtonian fluids from both continuum and microstructural starting points.Experimental assessment of predictions from rheological constitutive equations.Devices and methodologies for rheological measurements at both macro- and microscopic levels, including microrheology.Overly abstract, formalistic or artificial developments will not be welcomed.

Subscriptions

Journal of Nuclear Materials

ISSN: 0022-3115
5 Year impact factor: 3.1
Impact factor: 2.8

The Journal of Nuclear Materials publishes high quality papers in materials research for nuclear applications, primarily fission reactors, fusion reactors, and similar environments including radiation areas of charged particle accelerators. Both original research and critical review papers covering experimental, theoretical, and computational aspects of either fundamental or applied nature are welcome.Papers submitted to JNM should exhibit a high degree of novelty and contain a significant discussion section that analyzes and interprets the results with outcomes that advance our understanding and push the field forward. Incremental research papers are not acceptable.The breadth of the field is such that a wide range of processes and properties in the field of materials science and engineering is of interest to the readership, spanning atom-scale processes, microstructures, thermodynamics, mechanical properties, physical properties, and corrosion, for example.Topics covered by JNM Fission reactor materials, including fuels, cladding, core structures, pressure vessels, coolant interactions with materials, moderator and control components, fission product behavior.Materials aspects of the entire fuel cycle.Materials aspects of the actinides and their compounds.Performance of nuclear waste materials; materials aspects of the immobilization of wastes.Fusion reactor materials, including first walls, blankets, insulators and magnets.Neutron and charged particle radiation effects in materials, including defects, transmutations, microstructures, phase changes and macroscopic properties.Interaction of plasmas, ion beams, electron beams and electromagnetic radiation with materials relevant to nuclear systems.Topics NOT covered by JNMTopics in nuclear engineering and other areas not addressing materials, such as:Particle transport, cross-sections, shielding or isotope ratios (Radiation Physics and Chemistry; Annals of Nuclear Energy, Applied Radiation and Isotopes)Process engineering (Materials Science and Engineering A; Materials and Design)Leaching or chemical kinetics studies in aqueous, salt or other media (Hydrometallurgy; Chemical Engineering Science)Thermal hydraulics or properties of fluids (Nuclear Engineering and Design)Uranium extraction, uranium ore processing, and isotope separation processes (Nuclear Engineering and Design; Progress in Nuclear Energy)Fission or fusion reactor design and technology (Nuclear Engineering and Design; Fusion Engineering & Design)Plasma physics (Physics Letters A)Materials topics not addressing nuclear applications, such as general studies in:Physical and chemical properties including modeling and simulation (Materials Science and Engineering A; Materials Letters)Metallurgy (Journal of Alloys and Compounds; Materials Science and Engineering A)Corrosion (Corrosion Science)Welding and joining (Journal of Alloys and Compounds; Materials and Design)Ceramics (Journal of the European Ceramics Society; Ceramics international)

Subscriptions

Journal of Physics and Chemistry of Solids

ISSN: 0022-3697
5 Year impact factor: 3.7
Impact factor: 4.3

The Journal of Physics and Chemistry of Solids is a well-established international medium for publication of archival research in condensed matter and materials sciences. Areas of interest broadly include experimental and theoretical research on electronic, magnetic, spectroscopic and structural properties as well as the statistical mechanics and thermodynamics of materials. The focus is on gaining physical and chemical insight into the properties and potential applications of condensed matter systems.Within the broad scope of the journal, beyond regular contributions, the editors have identified submissions in the following areas of physics and chemistry of solids to be of special current interest to the journal:Low-dimensional systemsExotic states of quantum electron matter including topological phasesEnergy conversion and storageInterfaces, nanoparticles and catalystsFrom time-to-time, the journal publishes Special Issues containing collections of invited articles focused on topical or rapidly developing fields.

Subscriptions

Journal of Process Control

ISSN: 0959-1524
5 Year impact factor: 3.6
Impact factor: 3.3

A journal of IFAC, the International Federation of Automatic ControlThis international journal covers the application of control theory, operations research, computer science and engineering principles to the solution of process control problems. In addition to the traditional chemical processing and manufacturing applications, the scope of process control problems involves a wide range of applications that includes energy processes, nano-technology, systems biology, bio-medical engineering, pharmaceutical processing technology, energy storage and conversion, smart grid, and data analytics among others.Papers on the theory in these areas will also be accepted provided the theoretical contribution is aimed at the application and the development of process control techniques.Topics covered include:• Control applications• Process monitoring• Plant-wide control• Process control systems• Control techniques and algorithms• Process modelling and simulation• Design methodsAdvanced design methods exclude well established and widely studied traditional design techniques such as PID tuning and its many variants. Applications in fields such as control of automotive engines, machinery and robotics are not deemed suitable unless a clear motivation for the relevance to process control is provided.For more details on the International Federation of Automatic Control (IFAC), access their home page.

Subscriptions

Journal of Water Process Engineering

ISSN: 2214-7144
5 Year impact factor: 6.3
Impact factor: 6.3

AimsThe Journal of Water Process Engineering (JWPE) aspires to be the leading international platform for the dissemination of high-impact research on sustainable engineering solutions for water and wastewater treatment processes. It publishes rigorously peer-reviewed articles from researchers and practitioners actively engaged in the development and discovery of cost-effective technologies and engineering strategies in water and wastewater treatment. JWPE is fully aligned with and committed to achieving the United Nations Sustainable Development Goals, particularly “SDG 6: Clean Water and Sanitation."ScopeWater process engineering involves the understanding and application of fundamental scientific principles to transform raw or wastewater sources into valuable products that benefit society while operating across laboratory, pilot, or full industrial scales. These valuable products include clean water, energy, and various resources. JWPE focuses on the design, operation, control, modelling, optimization, and intensification of processes relevant to water and wastewater treatment.Research that emphasizes the engineered applications and practices of water and wastewater treatment processes, as opposed to studies focused primarily on fundamental scientific principles or materials development, is particularly valued. JWPE encourages submissions of high-quality research articles and state-of-the-art reviews from both academic and industrial researchers and technologists. Given that water processing largely involves the efficient removal and detoxification of contaminants in various forms (soluble, colloidal, or suspended; inorganic or organic; degradable or refractory), applicable technologies can generally be classified into the main categories of chemical conversion, physical separation, and biological degradation. These processes are conducted within various reactors and systems, which must be carefully designed, optimized, operated and controlled, making these aspects another integral part of water process engineering. In addition, the development of water technologies and systems is increasingly integrated with sensing and monitoring tools, which should also be addressed within the scope of JWPE. As global challenges such as the energy/resource crisis and climate change become more pressing, the concept of “wastewater as a resource” has gained widespread recognition, and maximizing resource recovery is now a critical objective in water processing.Based on these considerations, JWPE welcomes submissions in the following areas of interest: Chemical and Catalytic Conversion ProcessesThis category encompasses processes for converting dissolved refractory contaminants and toxicants into mineralized and/or non-toxic substances through chemical and catalytic mechanisms:Advanced oxidation using novel oxidizing agentsPhotocatalysis employing innovative catalysts and light sourcesElectrochemical-driven processes (e.g., electrocatalysis, electrooxidation, electro-crystallization)Catalytic and non-catalytic processes associated with acoustic, cavitation, microwave, and plasma applicationsWater disinfection using novel disinfectants and methodsChemical digestion and precipitation Other emerging technologies and processes for chemical/catalytic conversionSeparation and Extraction ProcessesThis category focuses on the physical and physicochemical separation/extraction of soluble, colloidal, and suspended contaminants from water and wastewater: Coagulation using novel coagulants/flocculants and methodsEnhancement of physical separation processes (e.g., sedimentation, flotation, media filtration, centrifugation, decantation)Membrane filtration processes, including pressure-driven and osmotically-driven membranes Membrane reactors/contactors (e.g., membrane bioreactor, reactors/contactors using photocatalytic or electrocatalytic membranes, and membrane distillation)Adsorption and ion exchangeThermal extraction/distillation for volatile substances extractionOther emerging technologies and processes for separation and extractionBiological and Ecological Processes This category addresses processes for the removal of biodegradable contaminants via biological and ecological methods:Enhancement of conventional biological processes (e.g., aerobic and anaerobic bioreactions, biofiltration)Biological processes for enhanced nutrient removalAnaerobic digestion for sludge disposalApplication of novel biotechnologies (e.g., microbial, fungal, molecular genetics) in water processingConstructed wetlands for water treatmentBioremediation for water environmental restorationEnhancement of ecological functions for water quality improvementOther emerging biological/ecological technologies and process hybridizationProcess Automation, Modelling, and OptimizationAdvanced process automation and control systemsIntegration of robotics and automated systems with water systemsModelling and optimisation of water processes and water systemsApplication of machine learning and advanced algorithms for process control & optimisationGreenhouse gas emissions modelling and control in water processesNovel methods for industrial benchmarking and reporting in water systemsEnergetics and life cycle assessments for water processesWater-energy nexus: optimisation of coupled water and energy systemsNet zero: new technologies, management strategies and policiesSensing, Monitoring and Emerging TechnologiesSensing technologies for detecting chemical and biological contaminants in water systemsNovel sensing and analytical technologies for emerging contaminants (e.g., microplastics, pharmaceuticals, PFAS)Novel technologies and approaches for water process monitoringEdge computing and IoT-enabled water monitoring systemsDevelopment and application of digital twins for water systemsData-driven predictive maintenance and fault detection in water processingAI-powered tools for real-time water quality prediction and decision-makingWater system digitization, big data analytics, and informaticsDisruptive technologies for water systems monitoring and managementProcesses for Resource Recovery and ValorisationThis category covers novel processes and technologies aimed at enhancing resource recovery and valorisation from domestic and industrial wastewater:Energy recovery and production from wastewaterResource recovery/extraction from wastewaterOptimized sludge management for improved energy/resource recoveryValorisation of products recovered from industrial wastewaterAtmospheric water generation and harvestingTechnological schemes (including case studies) for decarbonization in wastewater treatmentOther emerging technologies for resource recovery and valorisation from wastewaterAuthors are encouraged to select the most appropriate category from the six areas listed above for their submissions to JWPE, based on the primary focus of their study. In cases where the research involves hybrid technologies, authors should identify the category that best aligns with the ultimate objective of the study.Submissions related to the development and application of novel materials for water and wastewater treatment, particularly those focused on enhancing the removal of refractory pollutants and improving energy or resource recovery for large-scale or community-scale applications, are highly encouraged. Additionally, studies on emerging technologies in water process engineering that do not fall directly under the existing categories are welcome. However, authors should be mindful of specific exclusions, such as studies on desalination through thermal or membrane processes, which are not within the scope of JWPE.The journal also seeks submissions that address process engineering aspects of water sustainability, with a particular emphasis on water reclamation, reuse, and recycling, as well as energy and resource recovery from alternative sources. Studies focusing on fit-for-purpose treatment processes and technologies that aim to reduce energy and chemical consumption, minimize environmental and carbon footprints, and maximize social benefits are especially encouraged. JWPE periodically publishes “Virtual Special Issues” that explore emerging research areas. Authors should watch for "Calls for Papers" related to these hot topics. Potential contributors may contact the VSI Editor for information on the relevance of their proposed topic and check the VSI page for information.Please note that JWPE does not accept submissions based on fundamental batch studies that lack a focus on engineering applications. Common examples of unacceptable submissions include batch/static adsorption studies of model contaminants without dynamic flow studies, batch photodegradation studies involving photocatalysts modified for visible light operation without engineering application, microbiological studies without a strong connection to biological processing, and membrane fabrication research without practical application. Submissions must also include robust statistical data analysis and benchmarking of data against controls and relevant literature, as well as a thorough and ethical data analysis framework.

Subscriptions

Journal of the Taiwan Institute of Chemical Engineers

ISSN: 1876-1070
5 Year impact factor: 5
Impact factor: 5.5

Journal of the Taiwan Institute of Chemical Engineers (formerly known as Journal of the Chinese Institute of Chemical Engineers) publishes original works, from fundamental principles to practical applications, in the broad field of chemical engineering with special focus on three aspects: Chemical and Biomolecular Science and Technology, Energy and Environmental Science and Technology, and Materials Science and Technology. Authors should choose for their manuscript an appropriate aspect section and a few related classifications when submitting to the journal online.

Subscriptions

Materials Characterization

ISSN: 1044-5803
5 Year impact factor: 4.8
Impact factor: 4.8

Materials Characterization features original articles and state-of-the-art reviews on theoretical and practical aspects of the structure and behaviour of materials. The Journal focuses on all characterization techniques, including all forms of microscopy (light, electron, acoustic, etc.,) and analysis (especially microanalysis and surface analytical techniques), and must include microstructural imaging. Developments in both this wide range of techniques and their application to the quantification of the microstructure of materials are essential facets of the Journal. While X-ray, spectroscopic, and mechanical behaviour measurements are all important aspects of characterization, they are not sufficient on their own to satisfy the scope of the journal. The Journal provides the Materials Scientist/Engineer with up-to-date information on many types of materials with an underlying theme of explaining the behavior of materials from a microstructural standpoint using novel and established characterization approaches. Materials covered by the journal include:1. Metals & Alloys2. Ceramics3. Biomedical materials (only metal or ceramic based)4. Composites (only metal or ceramic based)5. Nanomaterials with structural characterization as the focus of the workPlease note that not all topics or materials fall within the scope of Materials Characterization. Submissions focused on the topics listed below will not be considered for publication, potential alternative journals are indicated in brackets: i) layered bulk materials are included, but thin films are not (Thin Solid Films; Materials Science in Semiconductor Processing) ii) polymers or polymer composites (Elsevier polymer titles; Composites structures) iii) cementitious materials (Cement, Cement and Concrete Composites) iv) mechanical, electrical or other property measurements without any accompanying microstructural characterization (depending on the focus, please consider submitting to Corrosion Science; Wear; Materials Science & Engineering B; Materials & Design)v) computation, theory or analysis papers without an accompanying microstructural characterization component (Computational Materials Science; Materials Science & Engineering A; Materials Science & Engineering B; Materials Science & Engineering C)

Subscriptions

Metabolic Engineering

ISSN: 1096-7176
5 Year impact factor: 7.6
Impact factor: 6.8

An official journal of the International Metabolic Engineering SocietyAims and Scope: Metabolic Engineering (MBE) is devoted to the publication of original research papers on the directed modulation of metabolic pathways for metabolite over production or the improvement of cellular properties. Papers describing native pathway engineering and synthesis of heterologous pathways for converting microorganisms into microbial cell factories are also welcome.Experimental, computational, and modelling approaches for the elucidation of metabolic pathways and their manipulation by genetic, media, or other environmental means are presented. Efficient probing of metabolic pathways requires the application of appropriate methods from molecular biology and biochemistry, along with modeling and data analysis techniques from engineering. MBE provides a forum for communicating such interdisciplinary research, as well as relevant results in the constituent areas of biochemistry, molecular biology, applied microbiology, cellular physiology, cellular nutrition in health and disease, and biochemical engineering.Types of papers: Original Research Papers, Review Papers.Authors are also welcome to submit to MBE?s companion title, Metabolic Engineering Communications, which publishes shorter articles and those describing key elements of larger metabolic engineering efforts.

Subscriptions

Microporous and Mesoporous Materials

ISSN: 1387-1811
5 Year impact factor: 4.7
Impact factor: 4.8

The Official Journal of the International Zeolite AssociationMicroporous and Mesoporous Materials covers novel and significant aspects of porous solids classified as either microporous (pore size up to 2 nm) or mesoporous (pore size 2 to 50 nm). The porosity should have a specific impact on the material properties or application. Typical examples are zeolites and zeolite-like materials, pillared materials, clathrasils and clathrates, carbon molecular sieves, ordered mesoporous materials, organic/inorganic porous hybrid materials, or porous metal oxides. Both natural and synthetic porous materials are within the scope of the journal.Topics which are particularly of interest include:All aspects of natural microporous and mesoporous solidsThe synthesis of crystalline or amorphous porous materialsThe physico-chemical characterization of microporous and mesoporous solids, especially spectroscopic and microscopicThe modification of microporous and mesoporous solids, for example by ion exchange or solid-state reactionsAll topics related to diffusion of mobile species in the pores of microporous and mesoporous materialsAdsorption (and other separation techniques) using microporous or mesoporous adsorbentsCatalysis by microporous and mesoporous materialsHost/guest interactionsTheoretical chemistry and modelling of host/guest interactionsAll topics related to the application of microporous and mesoporous materials in industrial catalysis, separation technology, environmental protection, electrochemistry, membranes, sensors, optical devices, etc.The journal publishes original research papers, short communications, review articles and letters to the editor.

Subscriptions

Molecular Catalysis

ISSN: 2468-8231
5 Year impact factor: 3.8
Impact factor: 3.9

Molecular Catalysis publishes full papers that are original, rigorous, and scholarly contributions examining the molecular and atomic aspects of catalytic activation and reaction mechanisms. The fields covered are:Heterogeneous catalysis including immobilized molecular catalystsHomogeneous catalysis including organocatalysis, organometallic catalysis and biocatalysisPhoto- and electrochemistryTheoretical aspects of catalysis analyzed by computational methodsManuscripts submitted to Molecular Catalysis ideally fall into the field of chemical synthesis, i.e. the preparation of chemical compounds used as pharmaceutical building blocks, fine chemicals, commodity chemicals or as bulk chemicals (or as precursors for them).Manuscripts dealing with non-synthetic topics such as degradation reactions (e.g. photocatalysis for the degradation of dyes/pollutants), (bio)sensors or fuel cells will not be considered for publication in Molecular Catalysis.Contributions that do not fall within the above aims and scope will be rejected at the editorial level. Examples are papers that are limited to:*** Routine preparation and characterization of catalytic materialsRoutine synthetic organic applications of catalysisRoutine computational studies that merely reproduces experimental data**Since the scopes of the Elsevier journals Molecular Catalysis, Applied Catalysis A: General, Applied Catalysis B: Environmental, and Catalysis Communications are complementary, an appropriate submission to each journal could be borderline, in which case the advice of another Editor will be sought, possibly redirecting the submission to either Applied Catalysis A: General, Applied Catalysis B: Environmental, or Catalysis Communications (for letters) with the author(s)'s agreement.Molecular Catalysis publishes regularly full papers; special issues on well-defined topics are published only by invitation. However, proposal from authors are welcome anytime and enquiries regarding the submission of special issues should be directed to the Editors. Any special issue should contain at least 30 articles featuring work from leading experts in the area and/or from leading institutes.Review and Perspective articles are normally published by invitation.Perspectives are short articles covering current areas of interest for molecular catalysis audience in the form of personal accounts. The length of a published perspective ranges from 1500 to 2000 words (excluding figures, structures, photographs, schemes, tables, etc.) with at least 20 or more references.A new article format called "Ongoing Story" will focus on a still open molecular catalysis research showing the developments in the understanding by a specialist area. The length of a published "Ongoing story" ranges from 500 to 1000 words (excluding figures, structures, photographs, schemes, tables, etc.).Guidelines for catalyst characterization and reporting experimental results:Every manuscript published in Molecular Catalysis has to provide sufficient experimental detail to reproduce the experiments and calculations reported. Also, the identity of the products (especially if a new product is synthesized) has to be established together with the yield and its purity.Catalyst characterization: To establish the identity of new catalysts a precise synthesis and purification procedure is inevitable as well as sufficient spectroscopic (e.g. UV-Vis, NMR etc.), crystallographic and chromatographic identification (ideally placed into the supporting information).In case of enzyme catalysts, a detailed description and documentation (e.g. SDS-gels etc) of the enzyme preparation (such as expression system, induction, fermentation conditions, downstream processing and enzyme purification) has to be provided.Catalyst activity assays have to be described in detail (including reagents, assay conditions and activity calculations).Reaction conditions: A detailed description of the reaction conditions comprises: solvent composition (if appropriate buffer strength, pH etc.), reaction temperature, pressure, shaking- or stirring etc. Whereas possible, the concentrations of all reagents must be given in molar concentrations. This applies in particular to time courses shown in the manuscript. Authors should refrain from showing %-conversions but rather show molar concentrations of products and starting materials. To evaluate the efficiency of a catalyst, turnover numbers and turnover frequencies (together with the conditions and equations for their calculation) should be included in the manuscript text.Statements on efficiency and/or environmental benignity: In general, authors should refrain from claims of 'efficiency' and/or environmental benignity ('greenness') unless these claims are substantiated by a quantitative comparison with a method of the state-of-the-art. Manuscripts using such terms excessively without quantitative justification will not be considered for publication.Plagiarism: All manuscripts submitted to Molecular Catalysis are routinely screened with respect to originality of concept, content, and writing. It is not appropriate for an author to reuse wording from publicly available sources (including the authors' own publications) no matter if cited (or not). Manuscripts with a plagiarism level (similarity index) above 10%, including self-plagiarism will be automatically rejected at Editorial level.

Subscriptions

Related subjects

Biochemical engineering

Catalysis

Chemical engineering general

Chemical health and safety

Fluid flow transfer processes

Industrial chemistry

Materials chemistry and engineering

Membranes and separation technology

Particle technology

Petroleum and fuel technology

Process chemistry and technology

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Journals in Chemical engineering

Journal of Non-Newtonian Fluid Mechanics

Journal of Nuclear Materials

Journal of Physics and Chemistry of Solids

Journal of Process Control

Journal of Water Process Engineering

Journal of the Taiwan Institute of Chemical Engineers

Materials Characterization

Metabolic Engineering

Microporous and Mesoporous Materials

Molecular Catalysis

Related subjects