Books in Systems and control

System Verification

1st Edition
April 10, 2007
Jeffrey O. Grady
English
eBook
9 7 8 0 0 8 0 4 8 9 7 8 0

Systems Engineering--an interdisciplinary, multi-stage-driven approach to the design and implementation of any large-scale or complex engineered product or service--has found its way from aerospace into general manufacturing as well as the services industry. It has been found to be particularly useful in such applications as software engineering, the bio- and medical industries, and large, multi-component projects like those found in energy-generation. Following on the author’s previous book System Requirements Analysis, System Verification will lay out the steps and procedures needed to implement a quality check of the system being proposed or designed…the “Verification” stage of a full systems engineering program. Systems engineering usually begins with defining a product that will satisfy a customer need and then rationally building a set of required components, personnel, and financial resources. The testing and evaluating of a proposed design solution is known as Verification, and this will guide the systems engineer and his engineering and management team in setting up the detailed protocols for a step-by-step quality control check of each stage of a proposed system design.

Power Plants and Power Systems Control 2006

1st Edition
February 6, 2007
David Westwick
English
eBook
9 7 8 0 0 8 0 5 5 5 3 6 2

Control plays a very important role in all aspects of power plants and power systems. The papers included in the 2006 Proceedings are by authors from a large number of countries around the world. They encompass a wide spectrum of topics in the control of practically every aspect of power plants and power systems.

Information Control Problems in Manufacturing 2006

1st Edition
December 18, 2006
Alexandre Dolgui + 2 more
English
eBook
9 7 8 0 0 8 0 4 7 8 4 8 7

Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006.INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service.INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation.The Proceedings are composed of 3 volumes:Volume 1 - Information Systems, Control & InteroperabilityVolume 2 - Industrial EngineeringVolume 3 - Operational Research

Improving Stability in Developing Nations through Automation 2006

1st Edition
November 28, 2006
Peter Kopacek
English
eBook
9 7 8 0 0 8 0 4 6 7 6 4 1

Technological development has caused profound changes and social stability. Regions which have had stable populations for centuries have experienced enormous population growth leading to the emergence of sometimes unmanageable megaplex cities as well as bringing about macroscopic environmental change. The scope of this IFAC SWIIS Conference is to offer insights into mitigating unwanted side-effects of rapid development and to share methodologies for appropriate ways of managing the introduction of technologies which will alter social stability. Contributions included in Improving Stability in Developing Nations through Automation 2006 cover a very broad field of interest for subjects such as social aspects of technology transfer, managing the introduction of technological change, ethical aspects, technology and environmental stability, and anticipating secondary and tertiary effects of technological development.

Fieldbus Systems and Their Applications 2005

1st Edition
November 23, 2006
Miguel Leon Chavez
English
eBook
9 7 8 0 0 8 0 4 6 7 6 3 4

The FeT series – Fieldbus Systems and their Applications Conferences started in 1995 in Vienna, Austria. Since FeT'2001 in Nancy, France, the conference became an IFAC – International Federation of Automatic Control sponsored event. These proceedings focus on 13 sessions, covering, fieldbus based systems, services, protocols and profiles, system integration with heterogeneous networks, management, real-time, safety, dependability and security, distributed embedded systems, wireless networking for field applications, education and emerging trends. Two keynote speeches from experts outside Europe are featured. The first one entitled "Bandwidth Allocation Scheme in Fieldbuses" by Prof. Seung Ho, Hanyang University, Korea. The second by, Prof. I.F. Akyildiz, Georgia Institute of Technology, USA, "Key Technologies for Wireless Networking in the Next Decade".

Analysis and Design of Hybrid Systems 2006

1st Edition
November 21, 2006
Christos Cassandras + 3 more
English
Paperback
9 7 8 0 0 8 0 4 4 6 1 3 4
eBook
9 7 8 0 0 8 0 4 7 5 8 4 4

This volume contains the proceedings of Analysis and Design of Hybrid Systems 2006: the 2nd IFAC Conference on Analysis and Design of Hybrid Systems, organized in Alghero (Italy) on June 7-9, 2006. ADHS is a series of triennial meetings that aims to bring together researchers and practitioners with a background in control and computer science to provide a survey of the advances in the field of hybrid systems, and of their ability to take up the challenge of analysis, design and verification of efficient and reliable control systems. ADHS'06 is the second Conference of this series after ADHS'03 in Saint Malo.

Clothing Biosensory Engineering

1st Edition
April 24, 2006
Yan Li + 1 more
English
eBook
9 7 8 1 8 4 5 6 9 1 4 6 2

Human sensory perception of clothing involves a series of complex interactive processes, including physical responses to external stimuli, neurophysiological processes for decoding stimuli through the biosensory and nervous systems inside the body, neural responses to psychological sensations, and psychological processes for formulating preferences and making adaptive feedback reactions.Clothing biosensory engineering is a systematic and integrative way of translating consumers’ biological and sensory responses, and psychological feelings and preferences about clothing, into the perceptual elements of design. It is a link between scientific experimentation and commercial application to develop economic solutions to practical technical problems.Clothing biosensory engineering quantifies the decision-making processes through which physics, mathematics, neurophysiological and engineering techniques are applied to optimally convert resources to meet various sensory requirements – visual/thermal/mechanical. It includes theoretical and experimental observations, computer simulations, test methods, illustrations and examples of actual product development.

Applied Control Theory for Embedded Systems

1st Edition
April 3, 2006
Tim Wescott
English
eBook
9 7 8 0 0 8 0 4 7 5 8 9 9

Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment.