Skip to main content

Books in Materials science

The Materials Science portfolio includes titles covering core knowledge and new research and applications across the field: nanotechnology and nanomaterials; polymers and plastics; textiles; composites and ceramics; electronic, magnetic, and optical materials; metals and alloys; biomaterials; surface and film science and coating technologies; materials chemistry, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world application examples provide valuable, actionable insights for researchers, students, and the corporate sector. Elsevier's Materials Science portfolio places special attention on areas of current and emerging interest such as additive manufacturing / 3D printing, graphene and 2D materials, smart materials, biomimetics... The content in Elsevier's Materials Science titles program addresses core challenges facing science and society: sustainable energy technologies, the circular economy, health and human welfare.

  • Steels: Metallurgy and Applications

    • 3rd Edition
    • David Llewellyn + 1 more
    • English
    STEELS: Metallurgy and Applications provides a metallurgical understanding of commercial steel grades and the design, manufacturing and service requirements that govern their application. The properties of different steels are described, detailing the effect of composition, processing and heat treatment. Where appropriate an introduction is given to standard specifications and design codes provided on component manufacture and property requirements for successful service performance.The book deals with steel products in some depth, in four chapters covering wide strip, structural steels, engineering and stainless steel grades. At the begining of each chapter an overview is given which details important features of the grades and a historical perspective of their development. Also featured are up to date information on steel prices and specifications.David Llewellyn has over thirty years experience in the steel industry and is currently lecturing in the Materials Engineering Department at University College Swansea.'..the book unfolds into an easily readable and a valuable source of highly relevant and contemporary information on steels' - METALS AND MATERIALS'.. a high quality product from all points of view' - INSTITUTE OF METALS AND MATERIALS AUSTRALASIA features up to date information on steel prices and specifications.
  • Frontiers in Tissue Engineering

    • 1st Edition
    • C.W. Patrick + 2 more
    • English
    Frontiers in Tissue Engineering is a carefully edited compilation of state-of-the-art contributions from an international authorship of experts in the diverse subjects that make up tissue engineering. A broad representation of the medical, scientific, industrial and regulatory community is detailed in the book. The work is an authoritative and comprehensive reference source for scientists and clinicians working in this emerging field.The book is divided into three parts: fundamentals and methods of tissue engineering, tissue engineering applied to specialised tissues, and tissue engineering applied to organs. The text offers many novel approaches, including a detailed coverage of cell-tissue interactions at cellular and molecular levels; cell-tissue surface, biochemical, and mechanical environments; biomaterials; engineering design; tissue-organ function; new approaches to tissue-organ regeneration and replacement of function; ethical considerations of tissue engineering; and government regulation of tissue-engineered products.
  • Smithells Light Metals Handbook

    • 1st Edition
    • G B Brook
    • E A Brandes
    • English
    The Smithells Metals Reference Book is one of the best known and most trusted sources of reference for the professional metallurgist or materials scientist, and has been so since its inception in 1949. Drawing upon the data contained within this respected work, and completely updating and revising it where necessary to bring the information completely up to date, the editors have created a new book which is dedicated to the most commonly used and popular light metals. The Smithells Light Metals Handbook, with its combination of comprehensive data on properties, standards and international materials specifications coupled with other unique features like the extensive section of binary phase diagrams, will no doubt become a standard reference work for the industrial and theoretical metallurgist. Containing all the data that you will ever need with respect to Aluminium, Magnesium and Titanium, this book will be an invaluable tool for anyone working in the design, manufacture or use of components or raw materials in these areas.
  • High Brightness Light Emitting Diodes

    • 1st Edition
    • Volume 48
    • English
    Volume 48in the Semiconductors and Semimetals series discusses the physics and chemistry of electronic materials, a subject of growing practical importance in the semiconductor devices industry. The contributors discuss the current state of knowledge and provide insight into future developments of this important field.
  • Fire Retardancy of Polymers

    The Use of Intumescence
    • 1st Edition
    • M Le Bras + 3 more
    • English
    Covers the following topics: Strategies; Intumescence: Mechanism studies; New intumescent polymetric materials; Flame retarded intumescent textiles; Intumescence - an environmentally friendly process?
  • Quality Assurance in Adhesive Technology

    Eureka Project EU 716
    • 1st Edition
    • A W Espie + 2 more
    • English
    This special report with user-friendly software has been produces following a collaboration between the Centre for Adhesives technology at TWI, Cranfield University and the DTI. The three-year project identified that highlighting design and production issue during very early stages of design enabled potential problem areas to be recognised and avoided. The team have therefore developed a generic quality assurance model to pinpoint the issues needing to be addressed well before a component reaches the production stage.The software is extremely user-friendly and comes with a flexible menu selection which enables the model to be customised to particular manufacturing requirements. It will be widely welcomed by designers and engineers involved with any products using adhesives or sealants.
  • Handbook of Plastics Joining

    A Practical Guide
    • 1st Edition
    • PDL PDL Staff
    • English
    A hands-on guide to choosing and using old and new technologies for joining plastics and elastomers. Includes detailed discussions of over 25 techniques used to join plastics to themselves and to other materials. Advantages and disadvantages of each technique along with detailed discussions of applications are presented. A second section is organized by material and provides details of using different processes with over 50 generic families of plastics and how different techniques and operating parameters affect weld strength and other criteria. This book is an excellent reference and an invaluable resource for novice and expert alike in determining the best joining technique for their application and providing guidance in how to design and prepare for production.
  • Metal and Ceramic Based Composites

    • 1st Edition
    • Volume 12
    • S.T. Mileiko
    • English
    Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the necessary technical information has not been well documented.The main purpose of this book is to link together fabrication, structure and properties chains, so as to clarify which structure provides the necessary properties, and how one can attain the correct composite structure. To this end, the book not only contains topics of a purely technical nature, but also a description of the failure mechanics of metal- and ceramic-matrix composites, as this is the key to understanding the structure-properties segment of the chain mentioned.The book is divided into three parts. Part I presents a general view of composites with the accent on metal- and ceramic-matrix composites. It also contains a brief description of modern fibres and composites and can be considered, at least for beginners, as a starting point for further study. Part II looks at the composite microstructures considered to be either optimal or reasonable in resisting a particular loading. Finally Part II describes a variety of mechanical, physical, and chemical potential for organizing these microstructures. Experimental data on technologies, material structures, and material properties are used throughout the book to support theoretical conclusions or to obtain important physical parameters.
  • Handbook of Optical Constants of Solids, Five-Volume Set

    Handbook of Thermo-Optic Coefficients of Optical Materials with Applications
    • 1st Edition
    • Edward D. Palik
    • English
    This set of five volumes, four volumes edited by Edward D. Palik and a volume by Gorachand Ghosh, is a unique resource for any science and technology library. It provides materials researchers and optical device designers with reference facts in a context not available anywhere else. The singular functionality of the set derives from the unique format for the three core volumes that comprise the Handbook of Optical Constants of Solids. The Handbook satisfies several essential needs: first, it affords the most comprehensive database of the refractive index and extinction (or loss) coefficient of technically important and scientifically interesting dielectrics. This data has been critically selected and evaluated by authorities on each material. Second, the dielectric constant database is supplemented by tutorial chapters covering the basics of dielectric theory and reviews of experimental techniques for each wavelength region and material characteristic. As an additional resource, two of the tutorial chapters summarize the relevant characteristics of each of the materials in the database.The data in the core volumes have been collected and analyzed over a period of twelve years, with the most recent completed in 1997. The volumes systematically define the dielectric properties of 143 of the most engaging materials, including metals, semiconductors, and insulators. Together, the three Palik books contain nearly 3,000 pages, with about 2/3 devoted to the dielectric constant data. The tutorial chapters in the remaining 1/3 of the pages contain a wealth of information, including some dielectric data. Hence, the separate volume, Index to Handbook of Optical Constants of Solids, which is included as part of the set, substantially enhances the utility of the Handbook and in essence, joins all the Palik volumes into one unit. It isthen of great importance to users of the set. A final volume rounds out the set. The Handbook of Thermo-Optic Coefficients of Optical Materials with Applications collects refractive index measurements and their temperature dependence for a large number of crystals and glasses. Mathematical models represent these data, and in turn are used in the design of nonlinear optical devices.
  • Mechanics of Materials 2

    The Mechanics of Elastic and Plastic Deformation of Solids and Structural Materials
    • 3rd Edition
    • E.J. Hearn
    • English
    One of the most important subjects for any student of engineering or materials to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.Building upon the fundamentals established in the introductory volume Mechanics of Materials 1, this book extends the scope of material covered into more complex areas such as unsymmetrical bending, loading and deflection of struts, rings, discs, cylinders plates, diaphragms and thin walled sections. There is a new treatment of the Finite Element Method of analysis, and more advanced topics such as contact and residual stresses, stress concentrations, fatigue, creep and fracture are also covered. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end.
  • Uncooled Infrared Imaging Arrays and Systems

    • 1st Edition
    • Volume 47
    • English
    This is the first book to describe an emerging but already growing technology of thermal imaging based on uncooled infrared imaging arrays and systems, which are the most exciting new developments in infrared technology today. This technology is of great importance to developers and users of thermal images for military and commercial applications. The chapters, prepared by world leaders in the technology, describe not only the mainstream efforts, but also exciting new approaches and fundamental limits applicable to all.
  • Partial Cumulative Index

    Cumulative Index
    • 1st Edition
    • Volume 100
    • Peter W. Hawkes
    • English
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.Volume 100 is a cumulative index for all in-print volumes of Advances in Electronics and Electron Physics (Volumes 63–89), Advances in Imaging & Electron Physics (Volumes 90–99), and Advances in Optical & Electron Microscopy(Volumes 1–14).
  • Duplex Stainless Steels

    Microstructure, Properties and Applications
    • 1st Edition
    • R Gunn
    • English
    Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands them to bring the topics right up to date. There is new material to cover grades, specifications and standards, and the book is fully cross-references and indexed.The first reference book to be published on the increasingly popular duplex stainless steels, it will be widely welcomed by metallurgists, design and materials engineers, oil and gas engineers and anyone involved in materials development and properties.
  • Flow-Induced Alignment in Composite Materials

    • 1st Edition
    • T.D. Papathanasiou + 1 more
    • English
    The purpose of aligning short fibres in a fibre-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibres, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material.Flow induced alignment in composite materials details, in a single volume, the science, processing, applications, characterisation and properties of composite materials reinforced with short fibres that have been orientated in a preferred direction by flows arising during processing. The topics discussed include fibre alignment and materials rheology; processes that can produce fibre alignment in polymeric, liquid crystal polymeric, and metallic composites; materials characterization and mechanical properties; and modelling of processes and materials properties.The technology of fibre-reinforced composites is continually evolving and this book provides timely and much needed information about this important class of engineering materials. The bookis an essential reference work for industry and an indispensable guide for the research worker, advanced student and materials scientist.
  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 102
    • Peter W. Hawkes
    • English
    Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.
  • Bioceramics Volume 10

    • 1st Edition
    • L. Sedel + 1 more
    • English
    Bioceramics 10 contains the proceedings of the 10th International Symposium on Ceramics in Medicine, held in Paris, France, in October 1997. These annual symposia bring together distinguished researchers in the fields of ceramics and medicine to exchange ideas and to discuss recent research results. Bioceramics in medicine has become one of the more important fields of biomaterials. The clinical applications of bioceramics are numerous. In particular in areas such as orthopaedic surgery, dentistry and plastic surgery, but also E.N.T., percutaneous devices and embolisation materials. In addition to the many clinical applications, Bioceramics 10 deals with a range of fundamental subjects in depth. This book will be an essential reference tool for both clinicians, academics and industrial researchers interested in the use of ceramics in medicine. The book will also be of great value to students and lecturers in materials science, biomedical engineering and orthopaedics. This volume contains 140 papers, more than 200 high quality photographs, and both author and keyword indexes.
  • Dynamics of Thin Walled Elastic Bodies

    • 1st Edition
    • J. D. Kaplunov + 2 more
    • English
    Written by a well-known group of researchers from Moscow, this book is a study of the asymptotic approximations of the 3-D dynamical equations of elasticity in the case of thin elastic shells of an arbitrary shape. Vibration of shells is a very useful theory in space techniques, submarine detection, and other high-tech domains. Dynamics of Thin Walled Elastic Bodies shows that refined shell theories used in engineering practice give a distorted picture of the high-frequency or non-stationary dynamics of shells, and offers new, mathematically more consistent ways of describing the dynamics of shells.
  • Advances in Imaging and Electron Physics

    • 1st Edition
    • Volume 101
    • Peter W. Hawkes
    • English
    Advances in Imaging & Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical & Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.
  • Lipid Polymorphism and Membrane Properties

    • 1st Edition
    • Volume 44
    • English
    The major lipid components of biological membranes can undergo many diverse and fascinating morphological rearrangements. Studies of these diverse phases and the manner in which they are formed tends to alter the properties of ordinary bilayer membranes. This book examines the structural and biological roles of lipids forming non-lamellar structures.
  • From Physics to Devices: Light Emissions in Silicon

    Light Emissions in Silicon: From Physics to Devices
    • 1st Edition
    • Volume 49
    • English
    Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors.The"Wil... and Beer"Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices,Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded.Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.
  • Advances in Research and Development

    Modeling of Film Deposition for Microelectronic Applications
    • 1st Edition
    • Volume 23
    • English
    Significant progress has occurred during the last few years in device technologies and these are surveyed in this new volume. Included are Si/(Si-Ge) heterojunctions for high-speed integrated circuits, Schottky-barrier arrays in Si and Si-Ge alloys for infrared imaging, III-V quantum-well detector structures operated in the heterodyne mode for high-data-rate communications, and III-V heterostructures and quantum-wells for infrared emissions.
  • Functionally Graded Materials 1996

    • 1st Edition
    • I. Shiota + 1 more
    • English
    Since a formulated concept of functionally graded materials (FGMs) was proposed in 1984 as a means of preparing thermal barrier materials, a coordinated research has been developed since 1986. The 125 papers presented here present state of the art research results and developments on FGM from the past decade.A wide spectra of topics are covered including design and modeling, fracture analysis, powder metallurgical processes, deposition and spray processes, reaction forming processes, novel processes, material evaluation for structural applications, organic and intelligent materials. Three reviews associated with national research programs on FGMs promoted in Japan and Germany, and the historical perspective of FGM research in Europe are presented as well.The resulting work is recommended to researchers, engineers and graduate school students in the fields of materials science and engineering, mechanical and medical engineering.
  • Metallurgy of Basic Weld Metal

    • 1st Edition
    • G M Evans + 1 more
    • English
    The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.
  • Handbook of Magnetic Materials

    • 1st Edition
    • Volume 10
    • English
    Volume 10 of the Handbook is composed of topical review articles written by leading authorities. In each of these articles an extensive description is given in graphical as well as in tabular form, much emphasis being placed on the discussion of the experimental material in the framework of physics, chemistry and materials science.Of all the new superconducting materials investigated having a more than three times highter transition temperature, the cuprates are the most prominent. Although originally intended as novel superconducting compounds, these materials have opened a new field of magnetism that permits detailed studies of the propagation of magnetic order as a function of separation and crystallographic orientation as well as studies of the interplay of strain and magnetic properties. Chapter one presents a detailed account of acheivements in this field.Further chapters report on the progress being made in research areas that have been dealt with in previous volumes of the Handbook. These include the group of soft magnetic materials in which supplementary results dealing with nanocrystalline alloys are highlighted; the magnetic properties of intermetallic compounds in which rare earth elements are combined with nonmagnetic elements; progress in the development in hard magnetic materials, with the emphasis on novel developments in the manufacturing routes and the physical principles on which these new developments are based.
  • Mineral Processing Technology

    • 6th Edition
    • Barry A. Wills
    • English
    'Mineral Processing Technology' provides practising engineers and students of mineral processing, metallurgy and mining with a review of the common ore-processing techniques utilized in modern installations. Each chapter encompasses all the recent technical developments which are advancing at a rapid rate to deal with the processing of increasingly complex and refractory ores. New equipment and process routes are also discussed.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. Four appendices are attached, one of which contains a valuable collection of BASIC computer programs. The work is fully indexed and referenced.
  • Group IV Heterostructures, Physics and Devices (Si, Ge, C, Sn)

    • 1st Edition
    • Volume 61
    • J.-M. Lourtioz + 2 more
    • English
    These proceedings contain the majority of papers presented atSymposium D, "Group IV heterostructures, physics and devices(Si,Ge,C,&... of the Spring Meeting of the EuropeanMaterials Research Society, held at the Congress Centre,Strasbourg, France, 4-7 June 1996. This Symposium was attendedby about 150 scientists from throughout the world, among whom 18were invited speakers.The aim of the Symposium was to discussthe most recent results in all fields of Group IVheterostructures and devices from fundamental physics toindustrial applications. Regular and invited contributions werethen welcomed which addressed the different aspects of growth,the effects of strain relaxation, particularly in SiGeC alloys,the basic optical and electrical properties of heterostructuresand low-dimensional structures, the microelectronic andoptoelectronics, such as rare-earth doping techniques, was alsoselected. Except for minor changes, the order of papers presentedin this special issue of Thin Solid Films closely follows theorder of topics listed above as well as the order of sessions atthe Symposium.
  • Advanced Materials for Interconnections

    • 1st Edition
    • Volume 66
    • Th. Gessner
    • English
    The conference "Advanced Materials for Interconnections" took place in Strasbourg on 4-7 June 1996 hosted by the EMRS Society. Based on the recent trends in microelectronics the main topics of the conference were new materials for interconnects like special aluminum alloys, tungsten and copper as well as low k dielectric materials.64 Papers were presented at the conference and 51 of these are contained as full length papers within this volume of Microelectronic Engineering.The proceedings are divided into 5 chapters. Chapter 1 related to Metallization discusses cluster equipment for IC manufacturing, copper advanced technology, gap filling, mechanical reliability, deposition technology, electroless and electro-plating, copper metallization copper interconnects and patterning of aluminum. Chapter 2, Process Integration, discusses multilevel interconnect, study on thin-film SOI devices, wet cleanings, influence of material characteristics and deposition processes, copper contamination and metallization, plasma behaviour, CMP processes, sub-micron inverse metallisation, interconnect formation and mechanical polishing investigations. Chapter 3 covers Barriers, and chapter 4 studies, evaluates and monitors Dielectrics. The final chapter looks at modelling comparisons.
  • Magnetic Ultra Thin Films, Multilayers and Surfaces

    • 1st Edition
    • Volume 62
    • F. Petroff + 1 more
    • English
    The Symposium on Magnetic Ultrathin Films, Multilayers andSurfaces, hosted by the European Materials Research Society, washeld at the Palais de la Musique et des Congré inStrasbourg, France on June 4-7, 1996. Its central theme was therelationship of magnetic properties and device performance tostructure at the nano and micrometer length scale. Research onthe magnetism of surfaces, ultrathin films and multilayers hasincreased dramatically during recent years. This development wastriggered by the discovery of coupling between ferromagneticlayers across nonmagnetic spacer layers and of the giantmagnetoresistan... effect in systems of reduced dimension usingvarious micro and nanofabrication techniques has become a subjectof special interest. It is certainly the promising applicationpotential of these effects in new magnetic recording devicegeometries which causes this intensive research, which is doneboth by companies and at universities and researchinstitutes.A selection of invited and contributed paperspresented at the Symposium and accepted for publication iscontained in this volume. The contents of these proceedings areorganized into seven sections.A. Nanowires, Nanoparticles,Nanost... Ultrathin Films and Surfaces,Characteriz... Giant MagnetoresistanceD. Coupling,TunnelingE. Growth, Structure, MagnetismF. Growth,Structure, MagnetoresistanceG. Coupling, Magnetic processes,Magneto-op... first four sections contain invited andoral contributed papers in the listed research domains, while thelast three sections contain the contributions presented duringthree large poster sessions.
  • Composite Sheet Forming

    • 1st Edition
    • Volume 11
    • D. Bhattacharyya
    • English
    Sheet forming is the most common process used in metal forming and is therefore constantly being adapted or modified to suit the needs of forming composite sheets. Due to the increasing availability of various types of fibre reinforced polymeric sheets, especially with thermoplastic matrices, the scope of use of such materials is rapidly expanding in the automobile, building, sports and other manufacturing industries beyond the traditional areas of aerospace and aircraft applications. This book contains twelve chapters and attempts to cover different aspects of sheet forming including both thermoplastic and thermosetting materials. In view of the expanded role of fibre reinforced composite sheets in the industry, the book also describes some non-traditional applications, processes and analytical techniques involving such materials.The first chapter is a brief introduction to the principles of sheet metal forming. The next two chapters introduce the various forms of materials, manufacturing techniques and the fundamentals of computer simulation. Chapter 4 describes the different aspects of thermoforming of continuous fibre reinforced thermoplastics and the following chapter studies the shear and frictional behaviour of composite sheets during forming. Chapter 6 explores the possibility of applying the grid strain analysis method in continuous fibre reinforced polymeric sheets. The next two chapters address fundamental concepts and recent developments in finite element modelling and rheology. Chapter 9 introduces the theory of bending of thermoplastic composite sheets and shows a novel way of determining both longitudinal and transverse viscosities through vee-bend tests. A significant expansion in the usage of composite materials is taking place in biomedical areas. Chapter 10 discusses the thermoforming of knitted fabric reinforced thermoplastics for load bearing and anisotropic bio-implants. The final chapter introduces roll forming, a commonly used rapid manufacturing process for sheet metals, and discusses the possibility of applying it economically for continuous reinforced thermoplastic sheets.
  • Effect of Disorder and Defects in Ion-Implanted Semiconductors: Electrical and Physiochemical Characterization

    • 1st Edition
    • Volume 45
    • English
    Defects in ion-implanted semiconductors are important and will likely gain increased importance in the future as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer afterhigh temperature annealing. Electrical and Physicochemical Characterization focuses on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented.
  • Effect of Disorder and Defects in Ion-Implanted Semiconductors: Optical and Photothermal Characterization

    • 1st Edition
    • Volume 46
    • English
    Defects in ion-implanted semiconductors are important and will likely gain increased importance as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer after high temperature annealing. The editors of this volume and Volume 45 focus on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented.
  • Biomaterials Science

    An Introduction to Materials in Medicine
    • 1st Edition
    • Buddy D. Ratner + 3 more
    • English
    This book introduces a subject that has profound impact on human health and considerable economic importance. The issues addressed include the biology, medical applications, markets, regulation, and ethical issues involved in biomaterials science. This spectrum of issues reflects the interdisciplinary nature of the field.
  • Polymer Colloids

    A Comprehensive Introduction
    • 1st Edition
    • Robert M. Fitch
    • English
    Finally! An authoritative, comprehensive textbook in this commercially and academically important field. Billions of kilograms of polymers are manufactured annually in the form of polymer colloids. Thousands of researchers work with them in a host of applications, from water-borne latex paints to cancer chemotherapeutics, but until now there was been no adequate introductory text.This book provides a solid development of the fundamentals to the field of colloid science with a solid development of the fundamentals of polymer colloids, emulsion, polymerization, latex technology, and the applications of functional latexes in catalysis, medical diagnostics and therapeutics. Fitch, who has been called the Benjamin Spock of Polymer Colloids, bases his approach to a complex field is based on his 40+ years of experience in industrial and academic research and development. His approach makes it easy to understand and be able to work effectively in this fascinating field.Students and professionals will find Polymer Colloids: A Comprehensive Introduction an important resource in gaining a working understanding of polymer colloids, enabling them to carry out their own research and/or development.
  • Handbook of Palladium-Catalysed Organic Reactions

    • 1st Edition
    • J. C. Fiaud + 2 more
    • English
    This comprehensive handbook will be an indispensable research tool for chemists. Handbook of Palladium Catalysed Organic Reactions provides a synoptic description of the main types of reactions which are catalyzed by Palladium and the mechanism which causes these reactions. Each reaction is presented in graphical form and classified according to the type of transformation involved.Other books covering the use of Palladium complexes as catalysts have been written, but the Handbook is the only to offer a synoptic view, showing the catalytic cycle of each reaction. This complete coverage provides the reader with a good understanding of the parameters involved. The tables included can be viewed from the point of view of the reagents, the product of the reaction, or the mechanism involved. The Handbook is a companion to the Database of Palladium Chemistry: Reactions andCatalytic Cycles, published on CD-ROM.
  • Advances in Research and Development

    Modeling of Film Deposition for Microelectronic Applications
    • 1st Edition
    • Volume 22
    • English
    Physics of Thin Films is one of the longest running continuing series in thin film science, consisting of 22 volumes since 1963. The series contains quality studies of the properties of various thin filmsmaterials and systems.In order to be able to reflect the development of today's science and to cover all modern aspects of thin films, the series, starting with Volume 20, has moved beyond the basic physics of thin films. It now addresses the most important aspects of both inorganic and organic thin films, in both their theoretical as well as technological aspects. Therefore, in order to reflect the modern technology-oriented problems, the title has been slightly modified from Physics of Thin Films to Thin Films.
  • Carbon Nanotubes

    • 1st Edition
    • M. Endo + 2 more
    • English
    Carbon nanotubes have been studied extensively in relation to fullerenes, and together with fullerenes have opened a new science and technology field on nano scale materials.A whole range of issues from the preparation, structure, properties and observation of quantum effects in carbon nanotubes in comparison with 0-D fullerenes are discussed.In addition, complementary reviews on carbon nanoparticles such as carbon nano-capsules, onion-like graphite particles and metal-coated fullerenes are covered.This book aims to cover recent research and development in this area, and so provide a convenient reference tool for all researchers in this field. It is also hoped that this book can serve to stimulate future work on carbon nanotubes.
  • Olefin Metathesis and Metathesis Polymerization

    • 2nd Edition
    • K. J. Ivin + 1 more
    • English
    This book is a follow-up to Ivins Olefin Metathesis, (Academic Press, 1983). Bringing the standard text in the field up to date, this Second Edition is a result of rapid growth in the field, sparked by the discovery of numerous well-defined metal carbene complexes that can act as very efficient initiators of all types of olefin metathesis reaction, including ring-closing metathesis of acyclic dienes, enynes, and dienynes; ring-opening metathesis polymerizationof cycloalkenes, acyclic diene metathesis polymerization; and polymerization of alkynes, as well as simple olefin metathesis. Olefin Metathesis and Metathesis Polymerization provides a broad, up-to-date account of the subject from its beginnings in 1957 to the latest applications in organic synthesis. The book follows the same format as the original, making it useful toteachers and to researchers, and will be of particular interest to those working in the fields of organic chemistry, polymer chemistry, organometallic chemistry, catalysis, materials science and chemical engineering.
  • New Fibers

    • 2nd Edition
    • Tatsuya Hongu + 1 more
    • English
    The first edition of New Fibers was enthusiastically received by a worldwide audience and this second edition has provided an opportunity to revise and update its contents and examine new developments since 1990.There have been considerable changes in the nature of the fibers being produced, the production methods and in consumers' values and expectations. Since 1990, the march of high-tech fibers has continued, with an ever increasing sub-division to meet specialised applications, as in high performance, high-function and high-sense fibers.New research and development has produced fibers with high tenacity and modulus to give the super-fibers now used as industrial materials. The more aesthetic and comfortable modern lifestyle has given rise to improved Shin-gosen and it is this springboard that leads on to 'fibers for the next millennium', the subject of a new chapter. Another new chapter examines the resurgence of synthetic cellulosics since 1990, in particular the various solvent-spun fibers of the Lyocell and Tencell families.
  • Liquid Moulding Technologies

    Resin Transfer Moulding, Structural Reaction Injection Moulding and Related Processing Techniques
    • 1st Edition
    • C D Rudd + 3 more
    • English
    Liquid moulding technologies such as RTM and SRIM are increasingly used for manufacturing composites in a variety of industries. Most interest stems from the automotive industry in the continuing search for weight savings, manufacturing economies and vehicle refinement.Liquid Moulding Technologies provides a unique insight into the development and use of such processes with a comprehensive description of the material, process variants, equipment, control strategies and tooling techniques used. Procedures for materials characterisation, preform and mould design are also described and the text is augmented by a number of case studies for prototype and production parts.This book is an invaluable source for both industrial moulders and those working in research and development.
  • Handbook of Compound Semiconductors

    Growth, Processing, Characterization, and Devices
    • 1st Edition
    • Paul H. Holloway + 1 more
    • English
    This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.
  • Materials Selection Deskbook

    • 1st Edition
    • Nicholas P. Cheremisinoff
    • English
    The chemical and allied industries employ a multitude of unit operations in product manufacturing. Both chemicals and physical mechanisms are employed in these operations, ranging from simple bulk handling and preparation of chemical feedstocks to complex chemical reactions in the presence of heat and or mass transfer. These operations require application of scientific and engineering principles to ensure efficient, safe and economical process operations. To meet these objectives, process equipment must perform intended functions under actual operating conditions and do so in a continuous and reliable manner. Equipment must have the characteristics of mechanical reliability, which includes strength, rigidity, durability and tightness. In addition, it must be designed at an optimized ratio of capital investment to service life. This book is designed as a handy desk reference covering fundamental engineering principles of project planning schemes and layout, corrosion principles and materials properties of engineering importance. It is intended as a general source of typical materials property data, useful for first pass materials selection in process design problems.
  • Polymer Characterization

    Laboratory Techniques and Analysis
    • 1st Edition
    • Nicholas P. Cheremisinoff
    • English
    This volume provides an overview of polymer characterization test methods. The methods and instrumentation described represent modern analytical techniques useful to researchers, product development specialists, and quality control experts in polymer synthesis and manufacturing. Engineers, polymer scientists and technicians will find this volume useful in selecting approaches and techniques applicable to characterizing molecular, compositional, rheological, and thermodynamic properties of elastomers and plastics.
  • Concrete Admixtures Handbook

    Properties, Science and Technology
    • 2nd Edition
    • V.S. Ramachandran
    • English
    Since the publication of the first edition ten years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding ten chapters bring this book up to date; reflecting the relative advances made in the science and technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the first edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures.
  • Handbook of Refractory Carbides and Nitrides

    Properties, Characteristics, Processing and Applications
    • 1st Edition
    • Hugh O. Pierson
    • English
    Refractory carbides and nitrides are useful materials with numerous industrial applications and a promising future, in addition to being materials of great interest to the scientific community. Although most of their applications are recent, the refractory carbides and nitrides have been known for over one hundred years. The industrial importance of the refractory carbides and nitrides is growing rapidly, not only in the traditional and well-established applications based on the strength and refractory nature of these materials such as cutting tools and abrasives, but also in new and promising fields such as electronics and optoelectronics.
  • Industrial Minerals and Their Uses

    A Handbook and Formulary
    • 1st Edition
    • Peter A. Ciullo
    • English
    This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.
  • High Density Plasma Sources

    Design, Physics and Performance
    • 1st Edition
    • Oleg A. Popov
    • Oleg A. Popov
    • English
    This book describes the design, physics, and performance of high density plasma sources which have been extensively explored in low pressure plasma processing, such as plasma etching and planarization, plasma enhanced chemical vapor deposition of thin films, sputtered deposition of metals and dielectrics, epitaxial growth of silicon and GaAs, and many other applications. This is a comprehensive survey and a detailed description of most advanced high density plasma sources used in plasma processing. The book is a balanced presentation in that it gives both a theoretical treatment and practical applications. It should be of considerable interest to scientists and engineers working on plasma source design, and process development.
  • Handbook of Vacuum Arc Science & Technology

    Fundamentals and Applications
    • 1st Edition
    • Raymond L. Boxman + 2 more
    • English
    This is a comprehensive text describing the basic physics and technological applications of vacuum arcs. Part I describes basic physics of the vacuum arc, beginning with a brief tutorial review of plasma and electrical discharge physics, then describes the arc ignition process, cathode and anode spots which serve as the locus for plasma generation, and resultant interelectrode plasma. Part II describes the applications of the vacuum arc for depositing thin films and coatings, refining metals, switching high power, and as sources of intense electron, ion, plasma, and x-ray beams.
  • Statistical Methods in Finance

    • 1st Edition
    • Volume 14
    • Maddala
    • English
    A comprehensive reference work for teaching at graduate level and research in empirical finance. The chapters cover a wide range of statistical and probabilistic methods applied to a variety of financial methods and are written by internationally renowned experts.
  • L12 Ordered Alloys

    • 1st Edition
    • Frank R.N. Nabarro + 1 more
    • English
    Dislocations are lines of irregularity in the structure of a solid analogous to the bumps in a badly laid carpet. Like these bumps, they can be easily moved, and they provide the most important mechanism by which the solid can be deformed. They also have a strong influence on crystal growth and on the electronic properties of semiconductors.