Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Fatigue Design

    International Series on the Strength and Fracture of Materials and Structures
    • 2nd Edition
    • Carl C. Osgood
    • D. M. R. Taplin
    • English
    Fatigue Design, Second Edition discusses solutions of previous problems in fatigue as controlled by their particular conditions. The book aims to demonstrate the limitations of some methods and explores the realism and validity of the resulting solutions. The text is comprised of four chapters that tackle a specific area of concern. Chapter 1 provides the introduction and covers the scope, level, and limitations of the book. Chapter 2 deals with the characteristics of design approach, and Chapter 3 talks about the prediction of fatigue life. The last chapter discusses the general factors in fatigue. The book will be of great interest to researchers and professionals concerned with fatigue analysis, such as engineers and designers.

  • Plastics Engineering

    • 2nd Edition
    • R.J. Crawford
    • English
    The first textbook to cover both properties and processing of reinforced and unreinforced plastics to this level. It assumes no prior knowledge of plastics and emphasizes the practical aspects of the subject. In this second edition over half the book has been rewritten and the remainder has been updated and reorganized. Early chapters give an introduction to the types of plastics which are currently available and describe how a designer goes about selection of a plastic for a particular application. Later chapters lead the reader into more advanced aspects of mechanical design and analysis of polymer melt flow. All techniques developed are illustrated by numerous worked examples, and several problems are given at the end of each chapter - the solutions to which form an Appendix.

  • Basic Reliability Engineering Analysis

    Butterworths Basic Series
    • 1st Edition
    • R. D. Leitch
    • English
    BASIC Reliability Engineering Analysis describes reliability activities as they occur during an industrial development cycle. Reliability as a function of time is discussed, along with systems modeling, predicting and estimating reliability, and quality assurance. This book is comprised of seven chapters and begins with a brief introduction to the BASIC computer language used in the programs in the text. The second chapter describes the way reliability is taken into account in different parts of the development cycle, while the third chapter discusses the basic concepts of reliability as a function of time, failure rate, and some basic statistical concepts. The fourth chapter deals with the modeling of complex systems and related topics such as availability and maintainability. The fifth chapter describes the activities that can go on early in the development cycle, while the sixth chapter gives some of the techniques that can be used to analyze data generated during development or later in the cycle when equipment is in use. The final chapter offers a brief look at quality assurance and acquaints the reader with the concepts involved, using inspection by attributes to introduce the ideas. This monograph is intended for engineers or managers with a particular interest in reliability, as well as for engineering undergraduates.

  • Theory of Plasticity and Limit Design of Plates

    • 1st Edition
    • Volume 18
    • Z. Sobotka
    • English
    An extensive review of the theory of plasticity, limit design and limit analysis of plates is contained in this volume. Detailed descriptions are given on the plastic behaviour of homogeneous, reinforced and sandwich plates, and on the rise of various yield-line patterns. The volume differs from other books on the plastic analysis of plates by its comprehensive treatment of: the theory of yield fans connected with yield-line planning; the plastic behaviour of plates under combined loadings characterized by the load factors; statical solutions; and continuous, rectangular and skew plates.Before discussing the upper-bound solutions for various types of ultimate loads acting on isotropic, orthotropic and anisotropic plates, the kinematic conditions of the plastic behaviour of plates and the principles and methods of the yield-line theory are examined in detail. Generalized yield conditions of the second degree for orthotropic and anisotropic plates are introduced. Special attention is paid to the rise of yield fans. The concept of yield line planning is also discussed, which may be of practical interest since it indicates the possibilities for preventing the rise of yield fans. Upper-bound and lower-bound solutions for the ultimate uniform load, concentrated loads, triangular and trapexoidal loads, are presented. Similar solutions are provided for continuous loads bounded by various plane and curved surfaces and for various combinations of loads acting on rectangular, polygonal, circular, elliptic and skew plates. Solutions are given for plates on hinged supports, on free supports with elevating corners, on point supports and also for plates with built-in edges. Numerical tables are provided for determining the ultimate loads, bearing moments needed for the given load systems and the parameters of yield-line patterns. The procedures detailed in the volume will prove an indispensable reference source in the practical design of roof, ceiling and bridge slabs.

  • Strength of Structural Elements

    • 1st Edition
    • Volume 26
    • Zbigniew Brzoska
    • M. Zyczkowski
    • English
    This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.

  • Protein Engineering

    Approaches to the Manipulation of Protein Folding
    • 1st Edition
    • Saran A. Narang
    • English
    Protein Engineering: Approaches to the Manipulation of Protein Folding outlines the complexity of the protein-folding problem and the potential of using genetic tools which, in combination with physical techniques, are expected to shed new light. The book begins with an overview of the basic concepts of protein folding, along with prediction methods and protein-folding models. Separate chapters cover experimental approaches to in vitro protein folding; general approaches used to characterize the folding reaction, equilibrium and kinetic experiments; and strategies employed to elucidate structure/function relationships in proteins of unknown tertiary structure. Subsequent chapters cover the structural and functional features of the HIV envelope protein; x-ray diffraction of proteins; application of Fourier transform infrared (FT-IR) spectroscopy to probe the secondary structure and orientation of membrane-associated proteins; and fluorescence measurements of proteins. The final chapters discuss nuclear magnetic resonance studies of proteins and the potential of the synthetic gene approach applied to the problem of protein folding.

  • Characterization of Composite Materials

    • 1st Edition
    • Hatsuo Ishida
    • English
    Now, in one book, there is coverage of modern surface analytical techniques applied specifically to composite materials. Centering around spectroscopic characterization of composites and polymer-matrix composities, Characterization of CompositeMaterials covers techniques with a demonstrated use for composite stuides along with promising new techniques such as STM/AFM and special Raman spectroscopy. Each chapter will cover a specific technique and will provide basic background information, theories of the technique, and application examples, including futuristic state-of-the-art applications. Detailed information about the individual characterization techniques mentioned can be found in the Encyclopaedia of Materials Cahracterization, the companion volume in the Materials Characterization Series: surfaces, interfaces, thin films.

  • Electrons, Neutrons and Protons in Engineering

    A Study of Engineering Materials and Processes Whose Characteristics May Be Explained by Considering the Behavior of Small Particles When Grouped Into Systems Such as Nuclei, Atoms, Gases, and Crystals
    • 1st Edition
    • J. R. Eaton
    • English
    Electrons, Neutrons and Protons in Engineering focuses on the engineering significance of electrons, neutrons, and protons. The emphasis is on engineering materials and processes whose characteristics may be explained by considering the behavior of small particles when grouped into systems such as nuclei, atoms, gases, and crystals. This volume is comprised of 25 chapters and begins with an overview of the relation between science and engineering, followed by a discussion on the microscopic and macroscopic domains of matter. The next chapter presents the basic relations involving mechanics, electricity and magnetism, light, heat, and related subjects which are most significant in the study of modern physical science. Subsequent chapters explore the nucleus and structure of an atom; the concept of binding forces and binding energy; the configuration of the system of the electrons surrounding the atomic nucleus; physical and chemical properties of atoms; and the structure of gases and solids. The energy levels of groups of particles are also considered, along with the Schrödinger equation and electrical conduction through gases and solids. The remaining chapters are devoted to nuclear fission, nuclear reactors, and radiation. This book will appeal to physicists, engineers, and mathematicians as well as students and researchers in those fields.

  • A Course of Mathematics for Engineerings and Scientists

    Volume 5
    • 1st Edition
    • Brian H. Chirgwin + 1 more
    • English
    A Course of Mathematics for Engineers and Scientists, Volume 5 presents the solutions of differential equations by obtaining the results in different forms. This book discusses the significant branch of mathematics generalizing the elementary ideas of function, integration, and differentiation. Organized into four chapters, this volume begins with an overview of the use of Fourier series that leads to solutions consisting of infinite series. This text then discusses the fundamental advantage of Laplace and Fourier transformation. Other chapters consider the technique of obtaining the solutions of ordinary, and several partial, differential equations from definite integrals. This book discusses as well the mathematical basis underlying the transformation methods connecting Laplace and Fourier transformations, which is given by the advancement of complex variable theory. The final chapter deals with the series of devices for inverting the transformation functions. This book is a valuable resource for scientists, engineers, mathematicians, and undergraduate students.

  • High Explosives and Propellants

    • 2nd Edition
    • S. Fordham
    • English
    High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.

  • Constitutive Equations for Engineering Materials

    Elasticity and Modeling
    • 1st Edition
    • Volume 37
    • Wai-Fah Chen + 1 more
    • English
    Constitutive Equations for Engineering Materials, Volume 1: Elasticity and Modeling, Revised Edition focuses on theories on elasticity and plasticity of engineering materials. The book first discusses vectors and tensors. Coordinate systems, vector algebra, scalar products, vector products, transformation of coordinates, indicial notation and summation convention, and triple products are then discussed. The text also ponders on analysis of stress and strain and presents numerical analysis. The book then discusses elastic stress-strain relations. Basic assumptions; need for elastic models; isotropic linear stress-strain relations; principle of virtual work; strain energy and complementary energy density in elastic solids; and incremental relations grounded on secant moduli are described. The text also explains linear elasticity and failure criteria for concrete and non-linear elasticity and hypoelastic models for concrete. The selection further tackles soil elasticity and failure criteria. Mechanical behavior of soils; failure criteria of soils; and incremental stress-strain models based on modification of the isotropic linear elastic formulation are considered. The text is a good source of data for readers interested in studying the elasticity and plasticity of engineering materials.

  • Space and Humanity

    Selected Proceedings of the 39th International Astronautical Federation Congress, Bangalore, India, 8-15 October 1988
    • 1st Edition
    • L. G. Napolitano
    • English
    This volume contains a selection of 27 papers that are chiefly survey, state-of-the-art, review or programmatic in nature. The volume itself is structured in three parts: Part I, The System, that deals with Space Transportation, Space Stations and Platforms; Part II, Hard and Soft Technologies, that deals with Technology Applications, Astrodynamics, Space Power and Propulsion; Part III, The Utilization, that addresses the two main lines Space Exploration and Applications, including Earth Observation, Telecommunication and Space Education, Microgravity, Safety and Rescue.

  • Track/Train Dynamics and Design

    Advanced Techniques
    • 1st Edition
    • Gerald J. Moyar + 2 more
    • English
    Track/Train Dynamics and Design: Advanced Techniques reviews the progress that has been made in the development and applications of advanced analytical techniques for improving the dynamic stability, safety, and reliability of current generation rail freight vehicle components and track structures. Topics covered range from structural mechanics and stress analysis methods to and material science techniques for the prediction of fracture and wear in railroad applications. The nature of technology transfer from other application areas, notably aerospace, is considered, along with the unique nature of some railroad problems. This book is comprised of 26 chapters and opens with an overview of Phase II of the Cooperative Track-Train Dynamics Program, including its main goals, tasks, and progress. The reader is then introduced to the state Of the art of rail analytical techniques and cost/benefit issues associated with railways and railroad transportation. The following chapters explore body centerplate fatigue cracking; mathematical models for track/train dynamics; wheel and rail wear during freight car curving; and application of advanced stress analysis techniques in the design of freight car components. The application of finite element analysis to the study of railroad wheel failure phenomena is also outlined. This monograph will be a useful resource for transportation and mechanical engineers, especially those dealing with railroads.

  • Mechanics of Composite Materials

    Recent Advances
    • 1st Edition
    • Zvi Hashin + 1 more
    • English
    Mechanics of Composite Materials: Recent Advances covers the proceedings of the International Union of Theoretical and Applied Mechanics (IUTAM) Symposium on Mechanics of Composite Materials. The book reviews papers that emphasize fundamental mechanics, developments, and unresolved problems of the field. The text covers topics such as mechanical properties of composite materials; influence of microstructure on the thermoplastics and transport properties of particulate and short-fiber composites; and further applications of the systematic theory of materials with disordered constitution. The selection also explains the curved thermal crack growth in the interface of a unidirectional carbon-aluminum composite and energy release rates of various microcracks in short-fiber composites. The book will be of great interest to researchers and professionals whose line of work requires the understanding of the mechanics of composite materials.

  • Principles of Transistor Circuits

    Introduction to the Design of Amplifiers, Receivers and Digital Circuits
    • 7th Edition
    • S W Amos
    • English
    Principles of Transistor Circuits, Seventh Edition discusses the fundamental concepts of transistor circuits. The book is comprised of 16 chapters that cover amplifiers, oscillators, and generators. Chapter 1 discusses semiconductors and junction nodes, while Chapter 2 covers the basic principles of transistors. The subsequent chapters focus on amplifiers, where one of the chapters discusses bias and D.C. The book also talks about sinusoidal oscillators and covers modulators, demodulators, mixers, and receivers. Chapters 13 and 14 discuss pulse generators and sawtooth generators, respectively. The last two chapters deal with digital circuits and the further applications of transistors and other semiconductor devices. The book will be of great use to professionals whose work requires a good understanding of the properties of transistor circuits.

  • Radio and Line Transmission

    Electrical Engineering Division, Volume 1
    • 1st Edition
    • Dermot Roddy
    • N. Hiller
    • English
    Radio and Line Transmission, Volume 1 provides an introduction to the basic principles of radio and line transmission. This book serves as a guide for technicians in the electrical engineering industry. Organized into 14 chapters, this volume starts with an overview of the definition of wave motion, which is a significant concept in the study of communications methods. This text then explains decibel as the most convenient practical unit based on logarithms. Other chapters consider the frequency ranges for speech and music. This book describes as well the harmonic composition of sound waves and the frequency analysis of speech. The final chapter presents the fundamental feature of all telegraph systems, which is the use of codes such as the Morse code, cable code, and the five-unit even-length code. This book is a valuable resource for electrical technicians engaged in radio communications. Senior technicians on national certificate courses will also find this book extremely useful.

  • Readings in Managerial Economics

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • I. B. Ibrahim + 2 more
    • English
    Readings in Managerial Economics is a five-part book that deals with the major subject areas of decision making; forecasting and demand analysis; production and cost; pricing and market structure; and capital budgeting and profit. This book combines a number of diverse articles, selected from recent issues of over fifty leading professional publication. Some of the articles deal principally with theory, some with applications, and some with both. This book will be useful for students and executives interested in this subject matter.

  • Audio IC Projects

    A Collection of Useful Circuits Based on Readily Available Chips
    • 1st Edition
    • Keith Brindley
    • English
    Each of the projects in this collection of data files provides a 'building block' which constructors can use to experiment with components and use as a starting point for further development. This book will thus provide a toolkit for building audio systems and circuits based on readily available components using straightforward techniques.Maplin staff are experienced providers of project ideas with useful features and many applications. Each of the circuits in this book are based around readily available chips, and provide an excellent way to become familiar with the characteristics of the chip as well as providing construction details for useful projects. Each includes pinouts and pin designations, output waveforms, parts lists, circuit diagrams, PCB layouts and photographs of the boards. The projects described in this book are based on those appearing in the popular Data Files feature in Electronics, the Maplin Magazine.

  • Transistor Switching and Sequential Circuits

    • 1st Edition
    • John J. Sparkes
    • English
    Transistor Switching and Sequential Circuits presents the basic ideas involved in the construction of computers, instrumentation, pulse communication systems, and automation. This book discusses the design procedure for sequential circuits. Organized into two parts encompassing eight chapters, this book begins with an overview of the ways on how to generate the types of waveforms needed in digital circuits, principally ramps, square waves, and delays. This text then considers the behavior of some simple circuits, including the inverter, the emitter follower, and the long-tailed pair. Other chapters examine the significant methods of producing non-sinusoidal waveforms, such as saw-tooth waves or square waves. This book discusses as well the procedures in organizing a circuit, which can be used in more complex applications than in the design of counters. The final chapter deals with the principle of machine multiplication. This book is a valuable resource for students engaged in the design and construction of digital or switching circuits.

  • Applied Mechanics for Engineers

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1st Edition
    • C. B. Smith
    • N. Hiller + 1 more
    • English
    Applied Mechanics for Engineers, Volume 1 provides an introduction to mechanics applied to engineering. The worked examples correspond to the first year of the Ordinary National Certificate in Engineering, which are supported with theories discussed in this book. The calculations in this text have all been made with the assistance of a slide rule and it is recommended that the reader acquire a slide rule to make full use of this publication. The topics covered include forces and moments; beams, shear force, and bending moment diagrams; velocity and acceleration; friction; and work, power, and energy. The gas laws; vapors, steam-engine, and boiler; and internal combustion engines are also deliberated in this text. This volume is valuable to engineering students, as well as researchers conducting work on applied mechanics.

  • Emergency Lighting

    For Industrial, Commercial and Residential Premises
    • 1st Edition
    • X. Lyons
    • English
    Emergency Lighting: For Industrial, Commercial and Residential Premises concerns itself with the provision of emergency lighting to facilitate exit routes for people in industrial, commercial, and residential areas. The book covers important topics such as the objectives of emergency lighting systems; the identification of safe routes under low lighting in different areas; and related devices such as luminaires, emergency signs, and way-guidance. Also discussed are the applications of emergency lighting; factors to consider in the design of emergency lighting; electrical installations; and testing and servicing. The book has appendices that serve as guides to UK emergency lighting equipment, names to be contacted, and a short guide in case of fire. The text is recommended for building planners, engineers, and architects. The book is also applicable to those who would like to know about emergency lighting but do not have any specialist knowledge on the subject, as the book avoids the use of jargon.

  • Experimental Mechanics

    Proceedings of the First International Congress on Experimental Mechanics Held in New York, November 1-3, 1961
    • 1st Edition
    • B. E. Rossi
    • English
    Experimental Mechanics presents the proceedings of the First International Congress on Experimental Mechanics, held at the Hotel New Yorker in New York City, on November 1–3, 1961. This book presents the application of the methods of experimental mechanics to technical problems. Organized into 21 chapters, this compilation of papers begins with an overview of the experimental techniques developed for different basic and applied research on strength of materials, performance of hydraulic machinery, and accuracy of mechanisms and machine tools. This text then surveys the developments in the field of mechanical measurements, including rubber gage, bolt gage, digital strain indicators, and waterproofed strain gage. Other chapters consider the experimental study of the transient response of a rocket sled with a vertically malaligned center of gravity. The final chapter deals with the conditions of collapse of stiffened cylindrical shells beyond the proportional limit of the material. Experimental stress analysts will find this book useful.

  • Principles and Applications of Tribology

    Pergamon International Library of Science, Technology, Engineering and Social Studies: International Series in Materials Science and Technology
    • 1st Edition
    • Desmond F. Moore
    • D. W. Hopkins
    • English
    Principles and Applications of Tribology provides a mechanical engineering perspective of the fundamental understanding and applications of tribology. This book is organized into two parts encompassing 16 chapters that cover the principles of friction and different types of lubrication. Chapter 1 deals with the immense scope of tribology and the range of applications in the existing technology, and Chapter 2 is devoted entirely to the evaluation and measurement of surface texture. Chapters 3 to 5 present the fundamental concepts underlying the friction of metals, elastomers, and other materials. The principles of hydrodynamic lubrication are briefly discussed in Chapter 6, and the mechanisms of boundary and elastohydrodynamic lubrication are examined in Chapters 7 and 8. Chapter 9 is a generalized treatise on wear and abrasion phenomena in metals and elastomers, whereas Chapter 10 deals with the internal friction in solids, liquids, and gases. Chapter 11 is an abbreviated yet thorough treatment of experimental methods used in tribological studies. The remaining five chapters in this book are devoted to specific applications, including manufacturing processes, automotive applications, transportation, locomotion, bearing design, and miscellaneous. This book is an ideal source for mechanical engineering students.

  • The Maplin Electronic Circuits Handbook

    • 2nd Edition
    • Michael Tooley
    • English
    The Maplin Electronic Circuits Handbook, Second Edition provides information pertinent to the design, testing, and construction of electronic circuits. This book aims to provide a unique collection of practical working circuits together with supporting information. Organized into 11 chapters, this edition begins with an overview of the common types of passive component for use in the circuits. This text then provides an introduction to a variety of the most commonly used semiconductor devices. Other chapters consider the correct operation of the power supply, which is crucial to most electronic circuits. This book discusses as well the amplifiers that may be categorized under a number of general headings, including such characteristics as class of operation, frequency response, and the type of circuitry employed. The final chapter outlines the constructional details of five of the most well-known Maplin projects. This book is a valuable resource for engineers, equipment designers, and electronics enthusiasts.

  • Modern Materials

    Advances in Development and Applications
    • 1st Edition
    • Henry H. Hausner
    • English
    Modern Materials: Advances in Development and Applications, Volume 3 is an 11-chapter text that provides comprehensive insight into the properties, applications, progress, and potentialities of various types of materials. The opening chapters present a short introduction to the fundamental concepts of polymer chemistry and definitions, followed by an extensive discussion on polyesters, phenolic resins, epoxy resins, silicones, and fluorinated polymers. The succeeding chapters deals with the general concepts of lubrication, the types and characteristics of natural and synthetic oils, their tests and specifications, and also their service applications. The discussion then shifts to the fundamental properties and applications of soft, hard, and special magnetic ferrites. Other chapters provide first an overview of an important theory on ferroelectricity, and then survey the properties, applications, and preparation of ferroelectric materials. The final chapters consider the concept of the liquid state and the heat transfer through liquid metals, as well as their operational procedures and equipment for handling. These chapters also look into the properties and applications of these materials in heat transfer, chemical, and physical uses. Materials scientists, engineers, researchers, teachers, and students will find this book invaluable.

  • Space Activity Impact on Science and Technology

    Proceedings of the XXIVth International Astronautical Congress, Baku, USSR, 7–13 October, 1973
    • 1st Edition
    • L.G. Napolitano + 2 more
    • English
    Space Activity: Impact on Science and Technology contains the proceedings of the 24th International Astronautical Congress held in the USSR on October 7-13, 1973. Contributors focus on the contribution of space research to the development of science and technology, including biology and medicine. This text begins with a discussion on the role played by Soviet automatic vehicles in the progress of space automatics and control theory. The discussion then turns to the problems of space technology and their implications for science and technology, industrial applications of aerospace technology, and development of liquid-propellant rocket engineering technology in the USSR. The chapters that follow explore the contribution of space medicine to public health; the role of astronautics in the development of methods of celestial mechanics; the flight performance of the unmanned Skylab space station; and remote sensing of the environment and earth's resources studies from Soviet manned spacecraft. The book concludes with an appraisal of international standards for model rocket engines. This book will be of interest to students of astronomy as well as researchers and practitioners working in the field of space exploration and research.

  • Physical Principles of Chemical Engineering

    International Series of Monographs in Chemical Engineering
    • 1st Edition
    • Peter Grassmann
    • H. Sawistowski
    • English
    Physical Principles of Chemical Engineering covers the significant advancements in the understanding of the physical principles of chemical engineering. This book is composed of 12 chapters that describe chemical unit processes through analogy with the unit of operations of chemical engineering. The introductory chapters survey the concept and principles of mass and energy balances, as well as the application of entropy. The next chapters deal with the probability and kinetic theories of gases, the physical aspects of solids, the different dispersed systems, and the principles and application of fluid dynamics. Other chapters discuss the property dimension and model theory; heat, mass, and momentum transfer; and the characteristics of multiphase flow processes. The final chapters review the model of rheological bodies, the molecular-kinetic interpretations of rheological behavior, and the principles of reaction kinetics. This book will prove useful to chemical engineers.

  • Elements of Loadbearing Brickwork

    International Series of Monographs in Civil Engineering
    • 1st Edition
    • David Lenczner
    • D. J. Silverleaf + 1 more
    • English
    Elements of Loadbearing Brickwork focuses on the developments in brickwork design and construction. Organized into seven chapters, this book first discusses the manufacture and properties of bricks. Subsequent chapters describe the properties of mortars and brickwork; design of brickwork members; reinforced brickwork; and composite action of loadbearing walls under wind loads. The last chapter presents the development in brickwork technology. This book will be valuable for students of structural engineering, building and architecture.

  • Astronautics for Peace and Human Progress

    Proceedings of the XXIXth International Astronautical Congress, Dubrovnik, 1-8 October 1978
    • 1st Edition
    • L. G. Napolitano
    • English
    Astronautics for Peace and Human Progress contains the proceedings of the 29th Congress of the International Astronautical Federation held in Dubrovnik, Croatia, on October 1-8, 1978. The papers explore the role of astronautics in the pursuit of peace and human progress and cover topics ranging from space exploration and communication satellites to space technology and Earth exploration from space. This book is comprised of 32 chapters and opens with a discussion on space programs of countries such as the United States, Japan, Germany, USSR, and Italy. The following chapters focus on systems for space exploration such as SPACELAB and those associated with the Voyager program and the International Solar Polar Out-of-Ecliptic Mission. The evolution of Space Power Systems is also described, along with Earth exploration from space. Spaceborne sensors, automatic data analysis, and Landsat imagery are considered. The final two sections deal with communication satellites and space technology. This monograph will appeal to space scientists and astronautical engineers.

  • An Introduction to Engineering Systems

    Pergamon Unified Engineering Series
    • 1st Edition
    • Samuel Seely
    • William F. Hughes + 2 more
    • English
    An Introduction to Engineering Systems discusses important aspects of systems engineering. It provides a background of analytical methods appropriate to hand-solution and computer solutions and shows the correlation that exists in alternate formulation. The book begins with an introduction to models and modeling of system elements. It then discusses the equilibrium formulations, signal flow graphs, and geometrical constraints of interconnected systems. After exploring aspects of system response and behavior in the time domain, the analyzes system response in the frequency domain. It also describes Z-transform methods and their application to discrete and continuous time systems. Finally, the book presents several approaches for testing the stability of linear systems. The text will provide students essential understanding of important methods of modern systems analysis.

  • Constitutive Equations for Polymer Melts and Solutions

    Butterworths Series in Chemical Engineering
    • 1st Edition
    • Ronald G. Larson
    • Howard Brenner
    • English
    Constitutive Equations for Polymer Melts and Solutions presents a description of important constitutive equations for stress and birefringence in polymer melts, as well as in dilute and concentrated solutions of flexible and rigid polymers, and in liquid crystalline materials. The book serves as an introduction and guide to constitutive equations, and to molecular and phenomenological theories of polymer motion and flow. The chapters in the text discuss topics on the flow phenomena commonly associated with viscoelasticity; fundamental elementary models for understanding the rheology of melts, solutions of flexible polymers, and advanced constitutive equations; melts and concentrated solutions of flexible polymer; and the rheological properties of real liquid crystal polymers. Chemical engineers and physicists will find the text very useful.

  • Electrical Principles and Technology for Engineering

    • 1st Edition
    • John Bird
    • English
    The aim of this book is to introduce students to the basic electrical and electronic principles needed by technicians in fields such as electrical engineering, electronics and telecommunications. The emphasis is on the practical aspects of the subject, and the author has followed his usual successful formula, incorporating many worked examples and problems (answers supplied) into the learning process.Electrical Principles and Technology for Engineering is John Bird's core text for Further Education courses at BTEC levels N11 and N111 and Advanced GNVQ. It is also designed to provide a comprehensive introduction for students on a variety of City & Guilds courses, and any students or technicians requiring a sound grounding in Electrical Principles and Electrical Power Technology.

  • Optimal Design of Flexural Systems

    Beams, Grillages, Slabs, Plates and Shells
    • 1st Edition
    • G. I. N. Rozvany
    • English
    Optimal Design of Flexural Systems: Beams, Grillages, Slabs, Plates and Shells deals with the optimal design of flexural systems, with emphasis on beams, grillages, slabs, plates, and shells. Analytical methods, plastic design, plane systems, and static problems are covered, together with optimal solutions for all boundary conditions that may be of practical or theoretical interest. Comprised of nine chapters, this book begins with an introduction to the fundamental concepts of mechanics, the calculus of variations, and optimal design. The next chapters discuss theories of optimal plastic design, along with elastic and prestressed systems; the theory of optimal flexure fields that give an absolute minimum statically admissible "moment volume" for plane systems; and slabs and grillages optimized within various types of geometrical constraints. The final chapter reviews experimental work and certain practical aspects of the optimization of flexural systems. This monograph should be of interest to graduate students and research workers in structural engineering, architectural science, aerospace technology, solid mechanics, and applied mathematics as well as to practicing engineers and architects engaged in large-scale projects.

  • Pressuremeter Testing

    Methods and Interpretation
    • 1st Edition
    • R. J. Mair + 1 more
    • English
    Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

  • The Characteristics of Mechanical Engineering Systems

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • R. Holmes
    • English
    The Characteristics of Mechanical Engineering Systems focuses on the characteristics that must be considered when designing a mechanical engineering system. Mechanical systems are presented on the basis of component input-output relationships, paying particular attention to lumped-parameter problems and the interrelationships between lumped components or ""black-boxes"" in an engineering system. Electric motors and generators are treated in an elementary manner, and the principles involved are explained as far as possible from physical and qualitative reasoning. This book is comprised of five chapters and begins with an introduction to the engineering system and how it works, citing a number of examples such as internal combustion engines, electric generators, and power converters in series. The discussion then turns to power conversion, with emphasis on general forms of converter output characteristic, demand characteristic, and efficiency characteristic. Power transmission is also considered, along with dynamic performance and energy storage. The final chapter examines the linear dynamics of mechanical systems and covers topics such as small excursion dynamics, integral control, and sinusoidal disturbance. Examples of control systems are given. This monograph should be of interest to mechanical engineers.

  • Handbook of Engineering Design

    • 1st Edition
    • Roy D Cullum
    • English
    The Handbook of Engineering Design aims to give accurate information on design from past publications and past papers that are relevant to design. The book is divided into two parts. Part 1 deals with stages in design as well as the factors to consider such as economics, safety, and reliability; engineering materials, its factors of safety, and the choice of material; stress analysis; and the design aspects of production processes. Part 2 covers the expansion and contraction of design; the preparation of technical specification; the design audit; and the structure and organization of design offices. The text is recommended to engineers who are in need of a guide that is easy to understand and concise.

  • Convex Models of Uncertainty in Applied Mechanics

    • 1st Edition
    • Volume 25
    • Y. Ben-Haim + 1 more
    • English
    Recognition of the need to introduce the ideas of uncertainty in a wide variety of scientific fields today reflects in part some of the profound changes in science and engineering over the last decades. Nobody questions the ever-present need for a solid foundation in applied mechanics. Neither does anyone question nowadays the fundamental necessity to recognize that uncertainty exists, to learn to evaluate it rationally, and to incorporate it into design.This volume provides a timely and stimulating overview of the analysis of uncertainty in applied mechanics. It is not just one more rendition of the traditional treatment of the subject, nor is it intended to supplement existing structural engineering books. Its aim is to fill a gap in the existing professional literature by concentrating on the non-probabilistic model of uncertainty. It provides an alternative avenue for the analysis of uncertainty when only a limited amount of information is available. The first chapter briefly reviews probabilistic methods and discusses the sensitivity of the probability of failure to uncertain knowledge of the system. Chapter two discusses the mathematical background of convex modelling. In the remainder of the book, convex modelling is applied to various linear and nonlinear problems. Uncertain phenomena are represented throughout the book by convex sets, and this approach is referred to as convex modelling.This book is intended to inspire researchers in their goal towards further growth and development in this field.

  • Advanced Engineering Thermodynamics

    Thermodynamics and Fluid Mechanics Series
    • 2nd Edition
    • Rowland S. Benson
    • W. A. Woods
    • English
    Advanced Engineering Thermodynamics, Second Edition is a five-chapter text that covers some basic thermodynamic concepts, including thermodynamic system equilibrium, thermodynamic properties, and thermodynamic application to special systems. Chapter 1 introduces the concept of equilibrium, maximum work of thermodynamic systems, development of Gibbs and Helmholtz functions, thermodynamic system equilibrium, and conditions for stability and spontaneous change. Chapter 2 deals with the general thermodynamic relations for systems of constant chemical composition; the development of Maxwell relations; the derivatives of specific heats; coefficients of h, p, T, Clausius-Clapeyron equations; the Joule-Thomson effect; and application of van der Waals gas-inversion curves to liquefaction system. Chapters 3 and 4 describe the thermodynamics of ideal gases, ideal gas mixtures, and gas mixtures with variable composition. These chapters also discuss processes involving dissociation-Lighthi... ideal dissociating gas, extension to ionization and real gas effects, and characteristics of "frozen" and equilibrium flows. Chapter 5 surveys the thermodynamics of elastic systems, surface tension, magnetic systems, reversible electrical cell, and fuel cell. This chapter also provides an introduction to irreversible thermodynamics, Onsager reciprocal relation, and the concept of thermoelectricity. This book will prove useful to undergraduate mechanical engineering students and other engineering students taking courses in thermodynamics and fluid mechanics.

  • Dynamics and Thermodynamics in Hierarchically Organized Systems

    Applications in Physics, Biology and Economics
    • 1st Edition
    • Volume 4
    • P. Auger
    • George J. Klir
    • English
    One of the most fundamental and efficient ways of conceptualizing complex systems is to organize them hierarchically. A hierarchically organized system is represented by a network of interconnected subsystems, each of which has its own network of subsystems, and so on, until some elementary subsystems are reached that are not further decomposed. This original and important book proposes a general mathematical theory of a hierarchical system and shows how it can be applied to very different topics such as physics (Hamiltonian systems), biology (coupling the molecular and the cellular levels), ecology (coupling the individual, population and ecosystem), and economics (coupling the sectoral, regional and national levels). The first attempt to develop mathematical frameworks for conceptualizing such systems only appeared in the early 1970s, and it took another decade before these mathematical frameworks were applied to various specific contexts of the sciences of the natural. Much of this work has been pioneered by the author, and he presents a more thorough work which will have a major impact on shifting current thinking in the sciences of the natural to a more holistic basis in which several levels of hierarchically organized systems are viewed in an integrated fashion.

  • Dictionary of the Printing and Allied Industries

    In English (with definitions), French, German, Dutch, Spanish and Italian
    • 2nd Edition
    • F.J.M. Wijnekus + 1 more
    • English
    The first edition of this dictionary, compiled by F.J.M. Wijnekus and published in 1967, was the result of years of systematic collection and preparation of thousands of terms and expressions which were until then not to be found in any other dictionary. The material was correlated for use in his daily work and, as the reputation of his private collection spread, there was an increasing demand for access to these findings. Until 1967 there was no comprehensive multilingual dictionary on the subject; former publications were incomplete and out of date and lacked clear definition - often leading to disastrous misunderstandings. Furthermore, the subject of printing, paper and ink technology had never been dealt with, in dictionary form, in relation to other aspects of the graphic industry.This new work, prepared by F.J.M. Wijnekus and his son, has been considerably up-dated. Much time has been devoted to checking the material against the most reliable and authoritative sources. The usefulness of the work has been further enhanced by the addition of Spanish and Italian to the original languages of English, French and German.The first edition was received with much enthusiastic praise and this new dictionary will undoubtedly continue to be an invaluable tool for all those working with the printed word in the widest sense. It is a reference work which should be in the hands of all those in any way connected with the printing industry, paper manufacturers, ink manufacturers, printers, bookbinders, publishers, lithographers, lay-out men and graphical research institutes.

  • Airport Terminals

    Butterworth Architecture Library of Planning and Design
    • 1st Edition
    • Christopher J. Blow
    • English
    Airport Terminals covers the significance of airport terminals and the politics of design. This book is organized into seven parts encompassing 28 chapters that examine the architectural quality of airport terminals. The first part highlights the basic terminal design principles, including considerations of location, size, capacity, and functional types. The subsequent parts consider the “taxonomy” of aircraft terminal forms and the external landside factors. These topics are followed by descriptions of the policies, layouts, configurations, data sheets, baggage handling, flight information systems, signage, and fire criteria of airport terminals. The final parts look into the external airside factors, such as aircraft docking and loading, as well as the redevelopment of existing airport terminals. This book will be of use to architects, engineers, and airport terminal managers.

  • Manufacturing Assembly Handbook

    • 1st Edition
    • Bruno Lotter
    • English
    Manufacturing Assembly Handbook identifies the possibilities for the rationalization of assembly in relation to the production rate and the product design. This book is based on practical experience for practical application and will give experts in the field of rationalization guidelines for the solution of rationalization problems. Topics discussed in the text include the determination of the economic efficiency of assembly concepts, modules for the automation of assembly processes, design of assembly machines, and design of flexible-assembly systems. The integration of parts manufacturing processes into assembly equipment or of assembly operations into parts production equipment, planning and efficiency of automated assembly systems, and the operation of automated assembly systems are covered as well. Production engineers and managers and students of production technology will find the book very useful.

  • The Refractory

    • 1st Edition
    • Edmund K. Storms
    • John L. Margrave
    • English
    The Refractory Carbides is intended as a guide to the chemist who wishes to undertake a fundamental study of refractory carbide systems. No effort has been made to discuss all of the properties for which information is available. Rather, the selection is intended to give the reader information and some insights which are basic to any measurement. This work includes a number of the more important physical and chemical properties of the nine transition elements included in Groups 4, 5, and 6 of the 4th, 5th, and 6th periods. The three actinide systems, Th-C, U-C, and Pu-C, have also been discussed. While this limited selection does not include all of the high melting carbides, it does include the more refractory and the more useful ones. These systems offer a unique collection of properties for an understanding of the chemical bond. Each system is discussed individually in terms of each property. These include phase relationship, lattice parameter and structure, chemical stability, hardness, and thermochemical properties which include vaporization behavior. In addition, the thermal data for the carbides and many of the associated elements have been reevaluated.

  • European Electronics Directory 1994

    Systems and Applications
    • 1st Edition
    • C.G. Wedgwood
    • English
    Companion volume to Components and Sub-Assemblies Directory, providing access to 8000 manufacturers, agents and representatives of electronics systems and equipment. Entries include names of key managers, addresses, fax/telephone numbers, and pocket descriptions of manufacturing and sales programmes. There is also a product index to track the companies involved in any given business lines.

  • Welding Craft Practice

    Oxy-Acetylene Gas Welding and Related Studies
    • 2nd Edition
    • N. Parkin + 1 more
    • English
    Welding Craft Practice, Volume 1: Oxy-acetylene Gas Welding and Related Studies, Second Edition covers the ground necessary for the acquisition of the essential basic skills and safe working methods and sufficient technology in oxy-acetylene gas welding and related studies. Weld defects, testing of welds, and welding science are discussed, and a graduated series of practical exercises is included. This volume is comprised of five chapters and begins with an overview of the basics of oxy-acetylene gas welding, including the gases used (acetylene and oxygen, welding systems and equipment, and safety precautions and fire prevention. The next chapter deals with the basic types of welds and the technique of oxy-acetylene gas welding, with emphasis on fusion welding of cast iron, bronzewelding and brazing, and building up worn parts. The reader is also introduced to the process of oxygen cutting of steel as well as inspection and testing of welds. The final chapter presents the results of related studies such as those concerning commonly welded metals and alloys; structure and mechanical properties of metals; and the state and structure of matter. This book will be of interest to welders, plumbers, metal workers, students, and those who wish to learn the basics of welding.

  • Analytical Kinematics

    Analysis and Synthesis of Planar Mechanisms
    • 1st Edition
    • Deborah Gans
    • English
    Using computational techniques and a complex variable formulation, this book teaches the student of kinematics to handle increasingly difficult problems in both the analysis and design of mechanisms all based on the fundamental loop closure equation.

  • Low and High Frequency Asymptotics

    Acoustic, Electromagnetic and Elastic Wave Scattering
    • 1st Edition
    • V.K. Varadan
    • English
    This volume focuses on asymptotic methods in the low and high frequency limits for the solution of scattering and propagation problems. Each chapter is pedagogical in nature, starting with the basic foundations and ending with practical applications. For example, using the Geometrical Theory of Diffraction, the canonical problem of edge diffraction is first solved and then used in solving the problem of diffraction by a finite crack. In recent times, the crack problem has been of much interest for its applications to Non-Destructive Evaluation (NDE) of flaws in structural materials.

  • Robotics

    3rd Edition
    • 1st Edition
    • Architecture Technology Architecture Technology Corpor
    • English
    Please note this is a Short Discount publication.Thorough... revised, this authoritative report continues to provide a comprehensive, yet accessible introduction to Fixed Industrial Robots.This 1991/92 edition ensures that professionals involved in Factory Automation have a comprehensive reference source enabling them to keep abreast of all the key developments in this powerful and rapidly evolving technology.The report examines the different kinds of industrial robots from the following angles:• How they are programmed to perform certain tasks.• How they are integrated into the manufacturing process.• Their use in manufacturing plants for assembly, painting, sealant application and welding.Key features• Vision systems• Microprocessors• Expert systems• Industrial end effectors• Commercial end–of–arm tooling• Automatic guided vehiclesAlso• Robotics safety• Checking and evaluating robots• The economic justifications for robots• Employee support for robots.

  • Amorphous Metals and Semiconductors

    Proceedings of an International Workshop, Coronado, California, USA 12–18 May 1985
    • 1st Edition
    • P. Haasen + 1 more
    • English
    Amorphous Metals and Semiconductors contains the proceedings of an international workshop held at Coronado, California, USA on May 12-18, 1985. Organized into five parts, this book first looks into the historical perspective on semiconductors and metals. This book then explains the glass formation, magnetic glasses, and amorphous semiconductors. The mechanical and chemical properties of these materials are also given.

  • Experimental Methods

    Treatise on Materials Science and Technology, Vol. 19
    • 1st Edition
    • Herbert Herman
    • English
    Treatise on Materials Science and Technology, Volume 19: Experimental Methods, Part B discusses the applications of photostimulated exoelectron emission; the use of photoacoustics in materials science; and microdynamic testing of materials. The text also describes the experimental methods in the mechanochemistry of inorganic solids; as well as the principles and technique of high-resolution transmission electron microscopy. Physicists, materials scientists, and materials engineers will find the book useful.

Related subjects