Journals in Mechanics

European Journal of Mechanics - A/Solids

ISSN: 0997-7538
5 Year impact factor: 3.9
Impact factor: 4.4

The European Journal of Mechanics A/Solids aims to publish high-quality articles in innovative areas of Solid Mechanics bridging fundamentals, physics, mathematics, computational sciences and materials engineering serving challenging technological applications relying on the mechanical behaviour of solids.The following topics are covered: Mechanics of materials; thermodynamics; elasticity; plasticity and damage; creep; fatigue; fracture; composites and multiphase materials; micromechanics; buckling phenomena; stability; dynamics, vibrations and waves in solids; solids for soft robotics; soft matter mechanics; metamaterial mechanics; contact mechanics, friction and wear; coupled problems; microstructural design and optimization; parameter identification for mechanics; biomechanics of soft and hard tissues; mechanics of MEMS and microsystems.

Subscriptions

European Journal of Mechanics - B/Fluids

ISSN: 0997-7546
5 Year impact factor: 2.3
Impact factor: 2.5

Entirely in EnglishThe European Journal of Mechanics - B/Fluids publishes papers in all fields of fluid mechanics. Although investigations in well-established areas are within the scope of the journal, recent developments and innovative ideas are particularly welcome. Theoretical, computational and experimental papers are equally welcome. Mathematical methods, be they deterministic or stochastic, analytical or numerical, will be accepted provided they serve to clarify some identifiable problems in fluid mechanics, and provided the significance of results is explained. Similarly, experimental papers must add physical insight in to the understanding of fluid mechanics.Fast Tracks in the European Journal of Mechanics B/Fluids is a venue for short papers with significant original results across the full range of fluid mechanics. Papers submitted as Fast Tracks will receive priority handling by a dedicated editor, to ensure accelerated publication, and will appear in a dedicated EJMB/Fluids section of each journal volume. EJMB/Fluids will strive for the editorial process of two months from submission to publication. Manuscripts submitted to Fast Tracks must maintain the same standard of rigor and quality required of all papers submitted to the Journal; thus, papers in the fast-track process are not intended for the publication of minor incremental or cursory results.The European Journal of Mechanics B/Fluids welcomes extended Comments to published articles, to facilitate evaluation of each paper by the community, to stimulate scientific discussions and possibly highlight paths of future research. It is not the objective of the Comments section to point to minor issues, such as typographical errors. A Comment is meant to clarify (or contend upon) the point of a paper, to facilitate an open discussion on the contents, conclusions, and consequences of a specific article.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

Extreme Mechanics Letters

ISSN: 2352-4316
5 Year impact factor: 4.8
Impact factor: 4.3

Extreme Mechanics Letters (EML) enables rapid communication of research that highlights the role of mechanics in multi-disciplinary areas across materials science, physics, chemistry, biology, medicine and engineering. Emphasis is on the impact, depth and originality of new concepts, methods and observations at the forefront of applied sciences.EML publishes letter-sized articles, as well as invited reviews and articles on topics of special interest. The goal is to have the papers published online within 6-8 weeks upon submission.EML covers experimental, theoretical, and computational mechanics of processes at all size and time scales. Of particular interest is the progress in mechanics that advances the fields of vital importance to the society, including, but not limited to, health science, energy systems, the environment, food and water, climate, and security.Among the topical areas of interest are:• Materials of extreme properties, such as exceptional hardness or softness • Materials under extreme conditions, such as high temperature and high loading rate • Stretchable, wearable, or implantable electronics for entertainment or healthcare • Soft robots in manufacturing, surgery and assisted living • Robots that crawl, run, swim or fly • Biomimetics that perceive, act, learn and remember • Active materials in response to mechanical, chemical, electrical, thermal stimuli • Instability and large deformation in nature and engineering systems • Force-induced configurational changes of proteins leading to cascades in cellular responses • Deformation, transport and fracture in high-efficiency batteries • Interfacial phenomena in interactions between fluids and solids, deformation and failure of materials, and processes of living cells • Self-assembly of materials and devices • Thin-membrane origami and kirigami • Mechanics of 3D printing • Materials and structures of hierarchical architectures • Hybrid systems of air, liquids, and solids • Earthquakes and hydraulic fracture • Foldable, lightweight structures for space exploration

Subscriptions

Flow Measurement and Instrumentation

ISSN: 0955-5986
5 Year impact factor: 2.2
Impact factor: 2.3

Flow Measurement and Instrumentation is dedicated to disseminating the latest research results on all aspects of flow measurement, in both closed conduits and open channels. The design of flow measurement systems involves a wide variety of multidisciplinary activities including modelling the flow sensor, the fluid flow and the sensor/fluid interactions through the use of computation techniques; the development of advanced transducer systems and their associated signal processing and the laboratory and field assessment of the overall system under ideal and disturbed conditions.FMI is the essential forum for critical information exchange, and contributions are particularly encouraged in the following areas of interest:Modelling: the application of mathematical and computational modelling to the interaction of fluid dynamics with flowmeters, including flowmeter behaviour, improved flowmeter design and installation problems. Application of CAD/CAE techniques to flowmeter modelling are eligible.Design and development: the detailed design of the flowmeter head and/or signal processing aspects of novel flowmeters. Emphasis is given to papers identifying new sensor configurations, multisensor flow measurement systems, non-intrusive flow metering techniques and the application of microelectronic techniques in smart or intelligent systems.Calibration techniques: including descriptions of new or existing calibration facilities and techniques, calibration data from different flowmeter types, and calibration intercomparison data from different laboratories.Install... effect data: dealing with the effects of non-ideal flow conditions on flowmeters. Papers combining a theoretical understanding of flowmeter behaviour with experimental work are particularly welcome.Multiphase behaviour: whether purpose-designed, or adapted from single-phase operation, coverage of systems for single-phase liquid and gas flows, multiphase flows having solid, liquid and gas phases, and slurries and pastes is equally welcome.Associated measurements and secondary instrumentation: for example, density, viscosity and secondary instrumentation effects.All contributions are subject to peer review, and additional features include: Review articles Case studies Letters to the editor Patent surveys Book reviews Calendar of events and conference reportsFlow Measurement and Instrumentation is essential reading for instrumentation engineers in the oil, gas, power, chemical, food, water and waste treatment industries, manufacturers of flowmeters, and academics involved in research in this area.

Subscriptions

International Journal of Fatigue

ISSN: 0142-1123
5 Year impact factor: 5.6
Impact factor: 5.7

Published in Affiliation with the European Structural Integrity SocietyThe International Journal of Fatigue aims to publish high quality, original papers that provide new insights into the mechanisms governing fatigue of materials and structures. The emphasis during the evaluation process will be on potential impact of the work, in terms of new scientific findings and substantial advancements to the field.The following aspects of existing engineering materials and structures, as well as newly emerging materials and structures, are of particular interest:Microstruct... sensitive aspects of fatigue crack initiation and growth, including ties to manufacturing processing and defect structures;New, empirically motivated descriptive models or rigorous validation and uncertainty quantification of existing models and codes of practice, in both cases these should be based on large datasets, considering multiple materials and loading configurations;Under... the influence of ?additive? manufacturing and processing route on fatigue performance, and embedding this understanding in more predictive schemes for mitigation and design against fatigue;New experimental findings, which either challenge existing models or are aligned with an extension of their application limits and the associated data pool;Fatigue analysis of materials and structures based on data science, including data mining, data fusion, and machine learning; andCombined and coupled behaviors that affect thermo-chemical-mech... degradation processes under cyclic loading conditions, including environmental degradation, are also included in the scope of the journal.The International Journal of Fatigue encourages papers that identify new mechanisms that enhance the scientific understanding and associate predictions of fatigue, which may include novel fatigue testing and characterization methods, as well as advanced modeling. Papers that openly provide companion algorithms, models, tools, databases, range, and limits of validation are sought. Papers with insufficient novelty, providing test data without new scientific findings or performing routine case studies or finite element analyses, are discouraged.

Subscriptions

International Journal of Impact Engineering

ISSN: 0734-743X
5 Year impact factor: 5.4
Impact factor: 5.1

The International Journal of Impact Engineering, established in 1983 publishes original research findings related to the response of structures, components and materials subjected to impact, blast and high-rate loading. Areas relevant to the journal encompass the following general topics and those associated with them:Behaviour and failure of structures and materials under impact and blast loadingSystems for protection and absorption of impact and blast loadingTerminal ballisticsDynamic behaviour and failure of materials including plasticity and fractureStress wavesStructural crashworthinessHigh-... mechanical and forming processesImpact, blast and high-rate loading/measurement techniques and their applicationsManuscri... submitted for publication will be subjected to stringent peer review and assessed for their contribution to scientific understanding of phenomena and the response of structures and materials to impact, blast and high-rate loading. Work resulting in fundamental insights that benefit engineering design to accommodate high-rate loading, is relevant to the journal. Well-designed and well-documented experimental studies that advance knowledge in the response of materials and structures subjected to impact, blast and high-rate loading are of relevance and interest. However, they should be accompanied by analysis of the experimental data and appropriate conclusions. The incorporation of analytical modelling and/or numerical simulations to support the experimental findings, will enhance the depth and quality of the research reported and make it more compelling. Manuscripts that focus primarily on mathematics, materials science or computation, with little contribution to the scope of impact dynamics described above, as well as those of a purely descriptive nature lacking in analysis, will be declined. Papers comprising largely parametric studies (e.g. using commercial software), unaccompanied by convincing validation and discussion of implications or applications of results generated, as well as those on novel computational techniques without comparison with established analysis or test data, are also not solicited. In all numerical studies, it is essential to demonstrate that the material parameters used in the simulations truly represent the actual physical properties of the material investigated. Consequently, sufficient description/discussi... on how the material parameters were obtained, together with any assumptions, would be necessary. The numerical modelling must also include sufficient information to enable third parties to repeat the simulations. Papers that are essentially case studies or descriptions of designs involving impact or blast loading, as well as dynamic testing which generates copious experimental data without in-depth analysis, should seek publication in journals more directly related to those particular areas.Papers in the International Journal of Impact Engineering should generally be of interest to those in the aeronautical, civil, mechanical, materials, naval, nuclear, ocean, offshore, and transportation engineering fields, as well as those in other science and engineering branches that deal with various aspects of impact, blast and high-rate loading.Companion papers - Authors should submit manuscripts that can be reviewed on their own, without assuming that related earlier or subsequent submissions will be published and available for reference. Authors of companion papers should inform the Editor of the reasons why they wish to publish their work in parts.Short CommunicationsA Short Communication is a brief paper for rapid dissemination of either noteworthy progress related to a particular problem, or new findings on a topic within the Aims and Scope of the Journal. Such articles should be original and impactful to journal readers involved in the field of the article. Author(s) should refer to their published Short Communication and incorporate substantial new content if they subsequently wish to submit a full-length research paper based on expansion of the Short Communication.Before submitting a manuscript to the Journal, please note the following - Publication in this Journal is very competitive. Only high-quality manuscripts that present research findings of sufficient novelty or significance within the Aim and Scope of the Journal and follow the Guide for Authors will be considered. Otherwise the manuscript may be directly rejected by the editor and not be sent for external review. Please carefully consider these criteria before submitting your manuscript to the Journal to save both reviewer's and editor's efforts and time.

Subscriptions

International Journal of Mechanical Sciences

ISSN: 0020-7403
5 Year impact factor: 6.6
Impact factor: 7.1

The International Journal of Mechanical Sciences (IJMS) is an international forum for the publication and dissemination of original work which contributes to greater scientific understanding of the main disciplines underpinning the mechanical, civil and material engineering sciences.Original contributions providing insight into the use of analytical, computational (e.g. FEM, BEM, mesh-free methods and others) modelling methods for rigid-body mechanics (e.g. dynamics, vibration, stability), structural mechanics, metal forming, behaviour and application of advanced materials (metals, composite, cellular, smart etc.), impact mechanics, strain localization and other effects of nonlinearity (e.g. large deflections, plasticity, fracture etc.), fluid mechanics (external and internal flows), tribology, thermodynamics and materials processing generally form the core of the journal contents.The International Journal of Mechanical Sciences does not accept for publication material which quite specifically belongs with other established specialist journals. Papers whose concern is primarily with mathematical or computational techniques, developed within a general framework and not aimed at any specific engineering application, are not requested. Similarly, papers whose content is purely descriptive or empirical and which do not make any scientific contribution, will not be considered. Comparison with experiments/tests conducted by the authors or others to validate the main contribution of the paper are strongly encouraged, however design-based studies, based on established formulae and methods, are outside our scope and should not be submitted to the International Journal of Mechanical Sciences.Only original, innovative and novel papers will be considered for publication in the International Journal of Mechanical Sciences and before considering their work, authors are required to confirm that their paper has not been submitted to any other journal in English or any other language. Occasionally, 'Letters to the Editor' are considered.

Subscriptions

International Journal of Multiphase Flow

ISSN: 0301-9322
5 Year impact factor: 3.6
Impact factor: 3.6

The International Journal of Multiphase Flow publishes analytical, numerical and experimental articles of lasting interest. The scope of the journal includes all aspects of mass, momentum and energy exchange phenomena among different phases such as occur in disperse flows, gas–liquid and liquid–liquid flows, flows in porous media, boiling, granular flows and others.The journal publishes full papers, brief communications and conference announcements and Express Tracks.Express Track (ExTra) are papers that will be handled by a dedicated editor with a very short turnover time. The main goal of IJMF Express Track is to report significant developments in the field of multiphase flows that deserve to be published in a speedy manner. The first-round reviewing process is typically less than three weeks, and the average time from the submission to final online publication will be within two months. Manuscripts submitted to Express Tracks must maintain the same standard of rigor and quality required of all papers submitted to the Journal.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

Subscriptions

International Journal of Non-Linear Mechanics

ISSN: 0020-7462
5 Year impact factor: 2.6
Impact factor: 2.8

The International Journal of Non-Linear Mechanics provides a specific medium for dissemination of high-quality research results in the various areas of theoretical, applied, and experimental mechanics of solids, fluids, structures, and systems where the phenomena are inherently non-linear.The journal brings together original results in elasticity, plasticity, dynamics, vibrations, wave-propagation, rheology, fluid-structure interaction systems, stability, biomechanics, micro- and nano-structures, materials, metamaterials, and in other diverse areas.Papers may be analytical, computational or experimental in nature. Treatments of non-linear differential equations wherein solutions and properties of solutions are emphasized but physical aspects are not adequately relevant, will not be considered for possible publication. Both deterministic and stochastic approaches are fostered. Contributions pertaining to both established and emerging fields are encouraged.

Subscriptions

International Journal of Plasticity

ISSN: 0749-6419
5 Year impact factor: 9.2
Impact factor: 9.4

The purpose of the journal is to report original research on all aspects of plastic deformation, damage and fracture behaviour of isotropic as well as anisotropic solids, including the thermodynamics of plasticity and fracture, continuum theory, and macroscopic as well as microscopic phenomena.The topics of interest include plastic behaviour of single crystals and polycrystalline metals, ceramics, rocks and soils, composites, nanocrystalline and microelectronics materials, shape memory alloys, ferroelectric ceramics, thin films and polymers, as well as plasticity aspects of failure and fracture mechanics. Significant experimental, numerical or theoretical contributions advancing the understanding of plastic behaviour of solids are of special interest, together with studies relating macroscopic to the microscopic behaviour of solids. Papers on modeling of finite nonlinear elastic deformation, with similarities to modeling of plastic deformation, are also welcome.The Journal will contain research papers, review articles, research notes, letters to the editor, and academic advertisements (books, journals, conferences, and symposia). Strain-rate dependent and strain-rate independent constitutive models to predict observed phemonena during quasi-static, dynamic or cyclic thermo-mechanical loading, behaviour of granular or porous solids under high confining pressures and at high temperatures, multiscale modeling of various deformation mechanisms (dislocation, twinning, and phase transformation), and models with capability for predicting the behaviour of composite materials based onknown plastic behaviour of matrix and fibers in such materials, are some examples of the main themes of this journal. Revealing applications of the new models of plasticity, including modelling of the observed phenomena in metal forming processes are also of interest.

Subscriptions

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Journals in Mechanics

European Journal of Mechanics - A/Solids

European Journal of Mechanics - B/Fluids

Extreme Mechanics Letters

Flow Measurement and Instrumentation

International Journal of Fatigue

International Journal of Impact Engineering

International Journal of Mechanical Sciences

International Journal of Multiphase Flow

International Journal of Non-Linear Mechanics

International Journal of Plasticity

Related subjects