Skip to main content

Books in Wear

Forsthoffer’s Component Condition Monitoring
1st Edition
November 16, 2018
Michael Forsthoffer
English
Forsthoffer's Component Conditioning Monitoring Handbook is dedicated to the condition monitoring of all rotating equipment. It describes the Forsthoffer Associates method of Component Condition Monitoring (CCM) and gives the reader detailed instructions on what to monitor for each component type. The author’s easy and approachable style makes this a very practical reference for any level of technical background. This represents the latest addition to a set that includes volumes on 1. Fundamentals of Rotating Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'.
Surface Coatings for Protection Against Wear
1st Edition
May 30, 2006
B G Mellor
English
As wear is a surface or near surface phenomenon it has long been realised that the wear resistance of a component can be improved by providing a surface of different composition from the bulk material. Although this book concentrates on surface coatings, the distinction between surface coatings and the process of modifying the surface by changing its composition is not always clear, so some useful surface modification techniques are also considered.Surface coatings for protection against wear, consists of twelve chapters written by different authors, experts in their field. After a brief introductory chapter wear phenomena and the properties required from a coating are addressed. Chapter three covers coating characterisation and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings. The next chapter provides an introduction to the various methods available to deposit wear resistant coatings. The following six chapters describe in detail wear resistant coatings produced by various deposition routes. Emphasis is placed on the microstructure property relationship in these coatings. Chapter eleven addresses coatings and hardfacings, produced from welding processes, specifically modern developments such as friction surfacing and pulsed electrode surfacing techniques. The final chapter is dedicated to future trends in both coating materials and coating processes.Surface coatings for protection against wear is essential for anyone involved in selecting coatings and processes and will be an invaluable reference resource for all engineers and students concerned with the latest developments in coatings technology.
15th Wear of Materials
1st Edition
August 10, 2005
Peter J. Blau + 1 more
English
These proceedings of the 15th International Conference on Wear of Materials focus on the friction and wear of materials in various applications under different environments from the nanometer scale to the meter scale. The conference provides a unique international forum for researchers and practitioners from different disciplines to exchange latest results. Coverage includes:• Wear assessment and monitoring• Wear modeling, mechanisms, mapping and prediction• Wear-corrosion testing and control• Surface engineering for wear and wear-corrosion control • Development of new wear test methods and wear test methodologies• Wear of materials for biomedical applications• Wear of non-equilibrium materials: from atomic dimensions to the micro-scale• Wear of hard and superhard materials • Wear of materials in the earthmoving, minerals processing and mining industries
Wear of Materials
14th International Conference
1st Edition
October 1, 2003
Peter J. Blau
R G Bayer
English
The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research.
Lubricated Wear
1st Edition
Volume 42
June 20, 2003
A. Sethuramiah
English
As a result of the increased focus on modern compact machinery in industry, wear in lubricated contacts and the problems of running in, and scuffing has become the most important form of wear.Despite this trend, until now information on lubricated wear has been scattered across a wide number of journals, emphasizing only one aspect of the wear process. This new book is a unique resource, consolidating all the available information into one place. In doing this Sethuramiah, contributes significantly to the development of knowledge in the field, by highlighting knowledge gaps for future research. More immediate improvements in practice have been clearly identified with well-argued methodologies with which the present level of knowledge can be improved. This book will therefore prove an essential resource for all engineers and scientists with an interest in lubricated wear.
A Guide to Wear Problems and Testing for Industry
1st Edition
December 31, 2001
Michael Neale + 1 more
English
Machine component wear is one of the costliest problems within industry. In fact, a 1997 survey in the UK placed wear costs at 25% of turnover, or approximately $1 billion. In many cases, making design and or material changes can reduce this cost by 50% or more! This handbook reviews component wear, and guides the reader through solutions to wear problems, testing methods for materials and wear mechanisms, and information on wear performance of different materials for components. The bottom line is that it helps to reduce ""the bottom line"" removing risks associated with changes to machinery.This book is based on practical use. It outlines the following practices: reviews of wear mechanisms that occur in various types of machinery and solutions to industrial wear problems; guides to relative wear performance of different component materials; comparison of the wear performance of those materials; reviews of laboratory tests to simulate wear, and selection of appropriate tests; identification of improved materials, and; examination of worn surfaces.
Wear of Materials
1st Edition
October 13, 1997
R.G. Bayer + 1 more
English
This volume contains the proceedings from the Eleventh Wear of Materials conference held in San Diego in April 1997. As 1997 marked the 20th anniversary of the conference a review of the conference history has been published including personal recollections from past Chairmen. In addition 67 full papers have been published together with 14 communications and case studies, providing an important information resouce for engineers and researchers worldwide.
Elastohydrodynamics - '96
Fundamentals and Applications in Lubrication and Traction
1st Edition
Volume 32
July 22, 1997
C. Taylor + 7 more
English
This volume represents the latest issue of a collection of Proceedings each dealing with a different topic in Tribology. This volume contains the Proceedings from the 23rd Leeds-Lyon Symposium which addressed the topic of Elastohydrodynamics and was attended by many international experts in the field.The Keynote Address was presented by Professor Stathis Ioannides on the subject of "Tribology in Rolling Element Bearings" and was followed by fifteen other sessions covering a wide variety of general areas from "Experimental" to "Lubricant Properties". In addition, nine other invited technical papers were presented to support the sessions.
Mechanics of Transformation Toughening and Related Topics
1st Edition
Volume 40
May 1, 1996
J.H. Andreasen + 1 more
English
Since the benefit of stress-induced tetragonal to monoclinic phase transformation of confined tetragonal zirconia particles was first recognized in 1975, the phenomenon has been widely studied and exploited in the development of a new class of materials known as transformation toughened ceramics (TTC). In all materials belonging to this class, the microstructure is so controlled that the tetragonal to monoclinic transformation is induced as a result of a high applied stress field rather than as a result of cooling the material below the martensitic start temperature.The significance of microstructure to the enhancement of thermomechanical properties of TTC is now well understood, as are the mechanisms that contribute beneficially to their fracture toughness. The micromechanics of these mechanisms have been extensively studied and are therefore presented here in a cogent manner.The authors also review dislocation formalism for the modelling of cracks and Eshelby's technique. In compiling this monograph the authors present the most up-to-date and complete review of the field and include several topics which have only recently been fully investigated.