Journals in Particle technology
Journals in Particle technology
- ISSN: 1674-2001
Particuology
The word 'particuology was coined to parallel the discipline for the science and technology of particles.Particuolo... is an interdisciplinary journal that publishes frontier research articles and critical reviews on the discovery, formulation and engineering of particulate materials, processes and systems. It especially welcomes contributions utilising advanced theoretical, modelling and measurement methods to enable the discovery and creation of new particulate materials, and the manufacturing of functional particulate-based products, such as sensors.Papers are handled by Thematic Editors who oversee contributions from specific subject fields. These fields are classified into: Particle Synthesis and Modification; Particle Characterization and Measurement; Granular Systems and Bulk Solids Technology; Fluidization and Particle-Fluid Systems; Aerosols; and Applications of Particle Technology.Key topics concerning the creation and processing of particulates include:Modelling and simulation of particle formation, collective behaviour of particles and systems for particle production over a broad spectrum of length scalesMining of experimental data for particle synthesis and surface properties to facilitate the creation of new materials and processesParticle design and preparation including controlled response and sensing functionalities in formation, delivery systems and biological systems, etc.Experimental and computational methods for visualization and analysis of particulate systemThese topics are broadly relevant to the production of materials, pharmaceuticals and food, and to the conversion of energy resources to fuels and protection of the environment.With a focus on new learning related to complex multi-scale systems and phenomena, Particuology especially welcomes and now provides a platform for themes related to meso-science. This emerging field recognises that common phenomena can be observed across length scales ranging from elemental particles through to that of the observable universe. Since particulate systems are ubiquitous in various fields, this initiative extends the scope of the journal, while maintaining a focus on the common scientific challenges for these fields.
- ISSN: 0021-9797
Journal of Colloid and Interface Science
The Journal of Colloid and Interface Science publishes original research findings on fundamental principles of colloid and interface science, as well as conceptually novel applications of these in advanced materials, nanomedicine, energy, environmental technologies, catalysis, and related fields. Criteria for publication are impact, quality, novelty and originality.The Journal of Colloid and Interface Science emphasizes fundamental scientific innovation within the following categories:A. Colloidal Materials and Nanomaterials B. Soft Colloidal and Self-Assembly Systems C. Adsorption, Catalysis and Electrochemistry D. Interfacial Processes, Capillarity and Wetting E. Biomaterials and Nanomedicine F. Energy Conversion and Storage, and Environmental TechnologiesBenefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 1351-4210
Focus on Surfactants
An International Newsletter Monitoring Technical and Commercial Developments for all Surface Active AgentsFocus on Surfactants reports on business and technical developments across the industry. Published monthly, each issue starts with a brief editorial and then provides a series of concise summaries on business, market and technical developments from a global perspective. The newsletter covers: • market news, including statistical, e-commerce and administrative reports • company and business news • new product information and news • environmental issues • book reviews.
- ISSN: 0032-5910
Powder Technology
An International Journal on the Science and Technology of Wet and Dry Particulate SystemsPowder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:Formation and synthesis of particles by precipitation and other methods.Modification of particles by agglomeration, coating, comminution and attrition.Characteri... of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).Packing, failure, flow and permeability of assemblies of particles.Particle-p... interactions and suspension rheology.Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.Interactio... between particles and their environment, including delivery of particulate products to the body.Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.Submissions will usually be overseen according to the following breakdown of specialties:L.S. Fan (The Ohio State University, USA) Fluidization, particulates and multiphase flows, particulates reaction engineering, modeling, measurements, and industrial processes and applicationsA. Teleki (Uppsala University, Sweden) Aerosols, nanoparticles, agglomeration, and functional material synthesis and applicationsC.Y. Wu (University of Surrey, UK) Particle characterization, particle mechanics, powder processing and handling, modeling and simulationA.B. Yu (Monash University, Australia) Granular dynamics and particle-fluid flow, particulate/granular systems and bulk solids handling, particle packing and structural analysis, comminution and attrition, material synthesis, process engineering and industrial applicationsJ.S. Curtis (University of California, Davis) Computational fluid dynamics and software development, modeling of particulate flow phenomena, application to granular and multiphase flows, fluid and particle mechanics, fluidization
- ISSN: 0257-8972
Surface and Coatings Technology
An international journal devoted to the science and application of advanced surface treatments for improvement of material propertiesSurface and Coatings Technology is an international archival journal publishing scientific papers on significant developments in surface and interface engineering to modify and improve the surface properties of materials for protection in demanding contact conditions or aggressive environments, or for enhanced functional performance. Contributions range from original scientific articles concerned with fundamental and applied aspects of research or direct applications of metallic, inorganic, organic and composite coatings, to invited reviews of current technology in specific areas. Papers submitted to this journal are expected to be in line with the following aspects in processes, and properties/performan... Processes: Physical and chemical vapour deposition techniques, thermal and plasma spraying, surface modification by directed energy techniques such as ion, electron and laser beams, thermo-chemical treatment, wet chemical and electrochemical processes such as plating, sol-gel coating, anodization, plasma electrolytic oxidation, etc., but excluding painting.B. Properties/performan... friction performance, wear resistance (e.g., abrasion, erosion, fretting, etc), corrosion and oxidation resistance, thermal protection, diffusion resistance, hydrophilicity/hydro... and properties relevant to smart materials behaviour and enhanced multifunctional performance for environmental, energy and medical applications, but excluding device aspects.Articles must go beyond the technical recipe format and gain substantial new understanding and insight based on detailed characterization of coatings and processes. Experimental papers should provide complete information on the process parameters and an appropriate microstructural characterization. Also, papers which include test data should provide full details of the test equipment and parameters. Such papers should report on the synthesis-characteri... relationships.Manusc... must be written in good English and contain a balanced and up-to-date reference list formatted according to the guide-for-authors.No... to authors: In order to be considered for publication, the Covering Letter with your paper should clearly explain the novelty and originality of your research and its scientific contribution beyond previously published papers. If not, your submission will not be considered for publication and will not be sent out for peer-review.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0001-8686
Advances in Colloid and Interface Science
An International Journal Devoted to Experimental and Theoretical Developments in Interfacial and Colloidal Phenomena and their Implications in Biology, Chemistry, Physics and TechnologyReview articles on any subject within the realm of colloid and interface science will be deemed appropriate for this journal. The subject matter should be treated in depth as a critical review of the current state of the subject area, including an informed opinion of the author on the topic. The manuscript should compare and contrast the ideas in the reviewed literature; and deal with the limitation of the ideas discussed. As such the articles in this journal are normally authored by the recognized experts.Articles only reporting on original research will not be accepted for publication.Both traditional topics and those of emerging science and technology are welcome. In particular, topics in nanoscience and nanotechnology, and those relating to interfacial and colloid aspects of the biosciences are encouraged. Areas of both theoretical or fundamental interest as well as those concerning industrial applications, emerging instrumental techniques, etc. are appropriate.Online article submission now available via: https://www.editoria... to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0169-4332
Applied Surface Science
A Journal Devoted to Applied Physics and Chemistry of Surfaces and InterfacesApplied Surface Science covers topics contributing to a better understanding of surfaces, interfaces, nanostructures and their applications. The journal is concerned with scientific research on the atomic and molecular level of material properties determined with specific surface analytical techniques and/or computational methods, as well as the processing of such structures.This journal accommodates the following topics:Surface science of catalysis, electrocatalysis and photocatalysis;Depos... and growth;2D assembly;Surface and interface modification by directed energy deposition (lasers, ion or electron beams) or other techniques such as plasmas;Surface engineering and functionalization;Fu... surfaces and coatings;Electrochem... at surfaces and corrosion protection strategies;Surface science applied to energy conversion and storage;Surface nanotechnology and devices;Semiconducto... - surface and interface;Biointerfa... to authors In order to be considered for publication, your paper must be a research study on the atomic and molecular level of material properties determined with specific surface approaches, either by experimental techniques or computational methods. If not, your submission will not be considered for publication and will not be sent out for peer-review. Content related to research presented at scientific events?can be submitted to the journal?s companion title, Applied Surface Science Advances.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0921-8831
Advanced Powder Technology
International Journal of Science and Technology of Powder and Particulate MaterialsThe aim of Advanced Powder Technology is to meet the demand for an international journal that integrates all aspects of science and technology research on powder and particulate materials. The journal fulfills this purpose by publishing original research papers, rapid communications, reviews, and translated articles by prominent researchers worldwide.Advanced Powder Technology covers various areas, but a discussion of powder technology and particulate science is highly required in articles. The discussion should relate to new powder and particulate materials, novel techniques, and innovative processes, especially those having potential practical implications, and should bring new understanding of powder technology.Topics include:Dynamics and phenomena of powderPowder and particle characterizationProd... of powder and particulate materials in gases and liquids(nanoparticle... fine ceramics, pharmaceuticals, particle modification,novel functional materials, etc.)Powder handling and operations (comminution, storage, transport,granulatio... separation, fluidization, etc.)Aerosol and colloidal processingMeasuremen... and control of powder processesNumerical simulation method (CFD, DEM, Monte Carlo method,population balance, etc.)The editorial work of Advanced Powder Technology, which was founded as the International Journal of the Society of Powder Technology, Japan, is now shared by distinguished board members, who operate in a unique framework designed to respond to the increasing global demand for articles on not only powder and particles, but also on various materials produced from them.
- ISSN: 1359-0294
Current Opinion in Colloid & Interface Science
Current Opinion in Colloid and Interface Science (COCIS) is an International Journal focused molecular and nanoscopic aspects of colloidal systems and interfaces encountered in materials science, biologically-relevan... systems, energy and environmental technologies, and industrial applications. COCIS is not a primary journal; rather, it seeks to guide the researcher through the maze of recently published literature, critically analyses the state of the art, identifies bottlenecks, unsolved issues and proposes future developments. The Journal highlights areas and papers which, in the opinion of the Editors and the Section Editors, are of special interest and significance.The scope of COCIS is divided in five Sections that include subtopics as listed below:Colloid components and colloidal materials (surfactants, polymers and polyelectrolytes, emulsions and microemulsions, self-assembly)Biolog... systems, medicine and health (biological colloids and interfaces, drug delivery, food colloids, cosmetics)Films and charged systems (electrokinetics, thin liquid films and foams, wetting and spreading)Colloidal systems for energy and environmental technologies (energy and energy storage, environmental technologies)Advance... methodologies (microscopy methods, NMR, rheology, surface analysis techniques, surface forces, x-ray, light and neutron scattering, theory and simulation)In addition, COCIS publishes "hot topic" special issues focused on emerging or timely topics. For each of the above areas, Section Editors are appointed, who commission expert scientists to write informed and critical articles on a selected topic. COCIS articles are not intended to be comprehensive compilations of the relevant literature, but are rather personal articles by the invited contributor(s), which aim to inform the reader of the major developments in the area, and to identify those papers which have made the greatest impact on the field, and open new perspectives. Normally, the period covered by the review concerns the previous five years.This is a Current Opinion journal, a series of established invite-only review journals that offer authoritative, systematic synthesis of emerging and hot topics. You can find more information on Current Opinion titles here.
- ISSN: 0167-5729
Surface Science Reports
A Review JournalSurface Science Reports contains invited review papers on experimental and theoretical studies in the physics, chemistry and pioneering applications of surfaces, interfaces and nanostructures. It covers topics which contribute to a better understanding of basic phenomena occurring on surfaces and interfaces, but also the application of this knowledge to the development of materials, processes and devices. "Surfaces" is defined in this journal to include all interfaces between solids, liquids, polymers, biomaterials, nanostructures, soft matter, gases and/or vacuum. The journal also contains reviews of experimental techniques and methods used to characterize surfaces and surface processes, e.g. those based upon the interactions of photons, electrons and ions with surfaces.