Skip to main content
Elsevier

Elsevier Science

  • Unsteady-state Fluid Flow

    Analysis and Applications to Petroleum Reservoir Behavior
    • 1st Edition
    • E.J. Hoffman
    • English
    The ubiquitous examples of unsteady-state fluid flow pertain to the production or depletion of oil and gas reservoirs. After introductory information about petroleum-bearing formations and fields, reservoirs, and geologic codes, empirical methods for correlating and predicting unsteady-state behavior are presented. This is followed by a more theoretical presentation based on the classical partial differential equations for flow through porous media.Whereas these equations can be simplified for the flow of (compressible) fluids, and idealized solutions exist in terms of Fourier series for linear flow and Bessel functions for radial flow, the flow of compressible gases requires computer solutions, read approximations. An analysis of computer solutions indicates, fortuitously, that the unsteady-state behavior can be reproduced by steady-state density or pressure profiles at successive times. This will demark draw down and the transition to long-term depletion for reservoirs with closed outer boundaries.As an alternative, unsteady-state flow may be presented in terms of volume and surface integrals, and the methodology is fully developed with examples furnished. Among other things, permeability and reserves can be estimated from well flow tests.The foregoing leads to an examination of boundary conditions and degrees of freedom and raises arguments that the classical partial differential equations of mathematical physics may not be allowable representations. For so-called open petroleum reservoirs where say water-drive exists, the simplifications based on successive steady-state profiles provide a useful means of representation, which is detailed in the form of material balances.Unsteady-St... Fluid Flow provides:• empirical and classical methods for correlating and predicting the unsteady-state behavior of petroleum reservoirs• analysis of unsteady-state behavior, both in terms of the classical partial differential equations, and in terms of volume and surface integrals• simplifications based on successive steady-state profiles which permit application to the depletion of both closed reservoirs and open reservoirs, and serves to distinguish drawdown, transition and long-term depletion performance.

  • Lubrication at the Frontier: The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime

    • 1st Edition
    • Volume 36
    • M. Priest + 9 more
    • English
    The 25th Leeds-Lyon Symposium on Tribology was held at the Institut des Sciences Appliquées de Lyon, from 8-11th September, 1998. Its central theme was, "Lubrication at the frontier: the role of the interface and surface layers in the thin film and boundary regime". This topic was chosen because it represents an important evolution of the research field.The Symposium opened with a keynote address entitled "Role of surface-anchored polymer chains in polymer friction" which described the processes taking place at the interface between "solid" and "liquid". The keynote address was followed by two invited lectures. Firstly, "Fuel efficient engine oils, additive interactions, boundary friction and wear" presented the industrial point of view on lubricant formulation and engine testing and its evolution. The second lecture was entitled "For establishment of a new EHL theory" and stressed the need to extend the current EHL theory.Beginning in 1974, The Leeds-Lyon Symposia have now covered a wide range of topics. The essential aim each year is to select a topic of current interest to tribologists and to contribute to further the advance of knowledge in selected fields.

  • Science and Technology in Catalysis 1998

    Proceedings of the Third Tokyo Conference on Advanced Catalytic Science and Technology, Tokyo, 19-24 July, 1998
    • 1st Edition
    • Volume 121
    • H. Hattori + 1 more
    • English
    In 1990, the Catalysis Society of Japan embarked on a new series of international conferences aiming to promote closer cooperation between technology and fundamental research and create new concepts for the development of useful catalytic systems. This series of conferences is named Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT). The success of TOCAT 1 in 1990 and the second conference in 1994 encouraged the Society to hold the third conference, TOCAT 3, following the same idea and style as the previous conferences.The present proceedings contain 87 papers: 5 plenary lectures, 10 invited papers, 34 papers selected for oral presentation, and 38 papers presented in the industrial poster session. The submitted manuscripts were peer-reviewed by experts in the field.

  • Computational Molecular Biology

    • 1st Edition
    • Volume 8
    • J. Leszczynski
    • English
    This book covers applications of computational techniques to biological problems. These techniques are based by an ever-growing number of researchers with different scientific backgrounds - biologists, chemists, and physicists.The rapid development of molecular biology in recent years has been mirrored by the rapid development of computer hardware and software. This has resulted in the development of sophisticated computational techniques and a wide range of computer simulations involving such methods. Among the areas where progress has been profound is in the modeling of DNA structure and function, the understanding at a molecular level of the role of solvents in biological phenomena, the calculation of the properties of molecular associations in aqueous solutions, computationally assisted drug design, the prediction of protein structure, and protein - DNA recognition, to mention just a few examples. This volume comprises a balanced blend of contributions covering such topics. They reveal the details of computational approaches designed for biomoleucles and provide extensive illustrations of current applications of modern techniques.A broad group of readers ranging from beginning graduate students to molecular biology professions should be able to find useful contributions in this selection of reviews.

  • SDL '99

    The Next Millennium
    • 1st Edition
    • R. Dssouli + 2 more
    • English
    This book represents the proceedings of the 9th SDL Forum which was held in Montreal, Quebec, Canada, during the week of June 21-25, 1999. The 9th SDL Forum presents papers on the past and future development of the MSC and SDL languages.The volume presents information on experience with the use of these languages in industrial development projects, on tools and techniques for using these languages in the software and hardware development process, and other aspects of these languages.

  • Thermodynamics of Systems Containing Flexible-Chain Polymers

    • 1st Edition
    • V.J. Klenin
    • English
    This book deals with the problems of the thermodynamics of systems containing flexible-chain polymers as the basis of polymer material science. The main thermodynamic quantities and concepts are introduced and discussed in the order of the objects getting more and more complicated: gases, magnets, low-molecular-weight substances and mixtures, and finally, polymers and polymer blends.All topics are considered in a common clue, using the principle of universality. The stability conditions for the one-phase state of multi-component systems are given. Phase separation is regarded as a result of loss in stability. The critical state of a system, with the one-phase state being close to the boundary of stability conditions breaking, is discussed in detail. The effects of both light scattering (elastic and dynamic) and diffusion, as directly depending on the thermodynamic parameters characterizing the one-phase state stability, are considered in detail. One of the versions of colloid scattering, namely, the turbidity spectrum method, is described as useful for the characterization of various heterogeneous structures and for the phase analysis of polymer systems. In the approximation of mean field theories and advanced field theory, formalisms expound the following divisions of the thermodynamics of binary and polynary systems with flexible-chain polymers: conformation of the polymer coil, composition fluctuations, elastic and dynamic light scattering, diffusion in the one-phase state (including the critical range), phase separation, polymer fractionation, the coil-globule transition, phase equilibrium and separation in the system network polymer + low-molecular-weight liquid, polymer blends and multiphase separation.

  • Charging Communication Networks

    From Theory to Practice
    • 1st Edition
    • D.J. Songhurst
    • English
    This book proposes that usage-based charging schemes are essential to generate the incentives necessary for efficient operation of multiservice networks. The rapid development of network technology is enabling sophisticated new services and applications which demand new charging models. The same technology provides the means to operate the right charging schemes.Some of the work done in the European collaborative project CA$hMAN (Charging and Accounting Schemes in Multiservice ATM Networks). This project combined performance and economic models of network resource usage and cutomer utility to construct simple but effective charging schemes which were implemented and trialled in an advanced management platform.

  • Light-Weight Steel and Aluminium Structures

    ICSAS '99
    • 1st Edition
    • P. Mäkeläinen + 1 more
    • English
    ICSAS '99 - The Fourth International Conference on Steel and Aluminium Structures was a sequel to ICSAS '87 held in Cardiff, UK, to ICSAS '91 held in Singapore and to ICSAS '95 held in Istanbul, Turkey. The objective of the conference was to provide a forum for the discussion of recent findings and developments in the design and construction of various types of steel and aluminium structures.The conference was concerned with the analysis, modelling and design of light-weight or slender structures in which the primary material is structural steel, stainless or aluminium. The structural analysis papers presented at the conference cover both static and dynamic behaviour, instability behaviour and long-term behaviour under hygrothermal effects. The results of the latest research and development of some new structural products were also presented at the conference. A total of 76 papers and 30 posters were presented at the conference by participants from 36 countries in all 6 continents.

  • Measuring Current, Voltage and Power

    • 1st Edition
    • Volume 7
    • K. Iwansson + 3 more
    • English
    This authoritative new book focuses on recent developments in the instrumentation for sending voltages and currents. It covers new trends and challenges in the field, such as measurements of biocurrents, the increased speed of the components for data taking, testing of computers and integrated circuits where the measurement of rapid voltage and current variations on a very small geometrical scale is necessary. The first chapter concentrates on recent methods to sense voltages and currents, while the rest of the book investigates the applied side, covering for instance electrical power and energy measurements. The main purpose of this volume is to illustrate commonly employed techniques rather than track the scientific evolution and merits and therefore mainly covers patent literature aimed at industrial applications. It is an exciting addition, justifying the series' claim to cover state-of-the-art developments in both the applied and theoretical fields of sensors and actuators.The measurement of voltages and currents is a common task in the field of electricity and electronics. From a technical point of view it is useful to identify schematically different steps of such a measurement. In a first step a voltage or a current is sensed, intermediate steps such as amplification, transmission and further treatment may follow to yield the result in the final step. Today in most cases microprocessors perform the final steps of such measurements. Analog-to digital converters digitise a voltage that is proportional to the value to be measured and a processor performs further computations and handles the storage and the display of the results. The prerequisite for such measurements are sensors or transducers that respond in a known way to the voltage or current to be measured. The emphasis of this book is put on recent developments of the instrumentation for sensing voltages and currents.Aside from the general trend towards smaller, cheaper and more reliable instrumentation, new demands have arisen. New applications, like measurements of biocurrents, ask for higher sensitivities. Computers and integrated circuits pose new challenges. To exploit the increased speed of the components for data taking, suitable sensors are required. The accuracy that can be achieved depends more than ever on the first step, the acquisition of the raw data. The influence of the measurement process on the results becomes more crucial. Testing of integrated circuits themselves is a completely new application. For such tests one has to measure rapid voltage and current variations on very small geometrical scales. Here, as well as in the traditional high voltage applications, contactless measurements play an important role.The organisation of this book is as follows: In the first chapter different methods to sense voltages and currents are described. For the sake of completeness most commonly used methods are mentioned, we concentrate, however, on those developed recently. The chapters address the subject from the side of different applications in which voltages and currents are sensed.Since the main purpose of this publication is to illustrate commonly employed techniques rather than to track the scientific evolution and merits in particular fields, in general those publications that illustrate a particular measurement principle best have been cited. The citation of a particular reference does therefore not imply that this is the first or most pertinent publication in the respective field.

  • Molybdenum Disulphide Lubrication

    • 1st Edition
    • Volume 35
    • A.R. Lansdown
    • English
    In the 1970s and the early 1980s there was an enormous volume of research and development into the subject of molybdenum disulphide lubrication, much of which was supported by national governments for the benefit of defence, aviation or space activities. There were already some well-established practical guidelines for deciding when and how to use molybdenum disulphide, but there was still a considerable lack of universally-accepted theoretical understanding of some of the important and fundamental aspects of molybdenum disulphide technology. However, the state of knowledge was growing rapidly.In the past fifteen years the situation with regard to the technology of molybdenum disulphide lubrication has stabilised in many respects, and a measure of consensus has been reached about some of the mechanisms involved. The use of molybdenum disulphide has become routine in some industries, and there are many well-established and reputable commercial products available. Except in the high-technology field of physical deposition techniques, especially sputtering, the output of new research publications has fallen from perhaps two hundred a year in the 1970s to fewer than ten a year in the 1990s. In spite of this maturing of the subject, it is clear that there are still many aspects in which disagreements persist about the mechanisms involved, and which as a result are unclear or misunderstood among current, and perhaps even more importantly, potential users.One of the primary objectives of this book is to analyse the various aspects of molybdenum disulphide lubrication technology about which there are still disagreements or controversy, and to attempt to come to firm conclusions about some of the mechanisms involved. In particular, it will place emphasis on the importance and effects of burnishing and film consolidation.

Browse by Publisher