Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Wing Theory in Supersonic Flow

    International Series of Monographs in Aeronautics and Astronautics
    • 1st Edition
    • Elie Carafoli
    • R. T. Jones + 1 more
    • English
    Division II: Aerodynamics, Volume 7: Wing Theory in Supersonic Flow examines the cases of isolated simple wings, wings with vertical plane tail, cruciform wings, and simple or cruciform wings fitted with a body. This book presents the method for the actual calculation of isolated wings or of more complex system. Organized into 12 chapters, this volume starts with an overview of the basic equations in the mechanics of inviscid fluids. This text then presents a unified theory that is established for angularly shaped wings in supersonic flow. Other chapters consider the method for calculating the characteristics of drag, lift, and moments for various shapes of the trailing edge line. This book discusses as well the wings of ordinary shapes, delta wings, yawed wings, polygonal wings, trapezoid wings, and arrow-head or swept-back wings. The final chapter deals with a delta wing with a central fusiform body. This book is a valuable resource for teachers, students, and specialists engaged in modern aerodynamics.

  • Civil Engineering Contracts

    Practice and Procedure
    • 2nd Edition
    • Charles K. Haswell + 1 more
    • English
    Civil Engineering Contracts: Practice and Procedure, Second Edition explains the contract procedures used in civil engineering projects. Topics covered include types of contract in civil engineering, general conditions of contract, insurances, and tender procedures. The powers, duties, and functions of the engineer and his representative are also considered. This book is comprised of 14 chapters and begins with an overview of the philosophy underlying the contract system in civil engineering, followed by a discussion on the promotion of civil engineering works. The reader is then introduced to types of civil engineering contracts; contract risk and contract responsibility; the application of contract documents; and general conditions of contract. The remaining chapters focus on contract specifications; bill of quantities and methods of measurement; principles and types of insurance; procedures for competitive bids or tenders; cost estimates, methods of pricing, and rate fixing; and claims on civil engineering contracts. The final chapter is devoted to arbitration and related procedure for the settlement of contract disputes. This monograph will be useful to practicing civil engineers who are involved with contract administration and to younger engineers who are aspiring to obtain professional qualifications.

  • Plastics as Corrosion-Resistant Materials

    The Commonwealth and International Library: Plastics Division
    • 1st Edition
    • V. Evans
    • A. Kennaway + 1 more
    • English
    Plastics as Corrosion-Resistant Materials presents the properties and applications of corrosion-resistant plastics. The book serves as a source of information for people who are looking for practical solutions with their corrosion problems. The book focuses on plastic materials and proven anti-corrosion methods with the use of plastics. It starts by discussing the general properties and applications of plastics. Fabrication of equipments and structures using one or a combination of plastic bases; and use and assembly of plastic pipes and fittings, linings, and coatings are covered as well. Engineers, technicians, plumbers, carpenters, homeowners, and hobbyists will find this book of considerable value.

  • Stereoregular Polymers and Stereospecific Polymerizations

    The Contributions of Giulio Natta and His School to Polymer Chemistry
    • 1st Edition
    • Giulio Natta + 1 more
    • English
    Stereoregular Polymers and Stereospecific Polymerizations: The Contributions of Guilio Natta and his School to Polymer Chemistry, Volume 1 covers the developments in understanding the reactions, nomenclature, and physico-chemical properties of polymers. This volume is composed of 82 chapters, and starts with surveys of the synthesis and crystal structure of polymers. Significant chapters are devoted to the characterization of crystalline polymers, with emphasis on the determination of their viscosity and molecular weight. Other chapters deal with stereospecific polymers of olefins, mechanism of stereospecific catalysis, reaction kinetics. This volume also considers the polymerization of synthetic elastomers and the copolymerization of olefins, as well as their reaction kinetics. The remaining chapters describe the X-ray characterization of isotactic polymers. This book is directed toward polymer chemists.

  • Pneumatic and Hydraulic Control Systems

    Seminar on Pneumohydraulic Automation
    • 1st Edition
    • M. A. Aizerman
    • English
    Pneumatic and Hydraulic Control Systems, Volume 2, documents the proceedings of a symposium on pneumohydraulic automation. The symposium is a continuation of the first symposium of papers on pneumohydraulic automatics which was published in 1959 by the Academy of Sciences, USSR. The present collection forms part of the lectures and reports presented at the second and third All-Union Conference on pneumohydraulic automatics and embraces a wide range of problems associated with the design and application of pneumohydraulic equipment in the automation of industrial units and other objects. This volume contains 23 chapters organized into four parts. Part I contains papers on the general problems of pneumo- and hydro-automatics. Part II presents studies on pneumatic and hydraulic methods and systems of automatic regulation. Part III is devoted to pneumatic computing devices and methods of computation. The papers in Part IV cover pneumo- and hydro-automatics in the German Democratic Republic and Czechoslovakia.

  • Metamorphic Textures

    • 1st Edition
    • Alan Spry
    • English
    Metamorphic Textures provides definitions, descriptions and illustrations of metamorphic textures, as well as the fundamental processes involved in textural development. This book is composed of 11 chapters and begins with a presentation of the metamorphic processes and the production of metamorphic minerals. The subsequent chapters describe the structural classification of grain boundaries, the metamorphic reactions, mineral transformations, and the crystallization and recrystallization of metamorphic rocks. These topics are followed by the texture examination of thermal metamorphic rocks and minerals and the preferred orientations of these rocks, particularly the dimensional and lattice preferred orientation. Other chapters survey the textures of rocks under dynamic and shock metamorphism. The final chapters describe the textures of regional and polymetamorphism. This book will be of great use to petrologists, physicists, and graduate and undergraduate petrology students.

  • Readings in Managerial Economics

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • I. B. Ibrahim + 2 more
    • English
    Readings in Managerial Economics is a five-part book that deals with the major subject areas of decision making; forecasting and demand analysis; production and cost; pricing and market structure; and capital budgeting and profit. This book combines a number of diverse articles, selected from recent issues of over fifty leading professional publication. Some of the articles deal principally with theory, some with applications, and some with both. This book will be useful for students and executives interested in this subject matter.

  • Manufacturing Assembly Handbook

    • 1st Edition
    • Bruno Lotter
    • English
    Manufacturing Assembly Handbook identifies the possibilities for the rationalization of assembly in relation to the production rate and the product design. This book is based on practical experience for practical application and will give experts in the field of rationalization guidelines for the solution of rationalization problems. Topics discussed in the text include the determination of the economic efficiency of assembly concepts, modules for the automation of assembly processes, design of assembly machines, and design of flexible-assembly systems. The integration of parts manufacturing processes into assembly equipment or of assembly operations into parts production equipment, planning and efficiency of automated assembly systems, and the operation of automated assembly systems are covered as well. Production engineers and managers and students of production technology will find the book very useful.

  • Electronics for Technicians

    The Commonwealth and International Library: Electrical Engineering Division
    • 1st Edition
    • P. W. Crane
    • N. Hiller
    • English
    Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR circuits. The chapters that follow focus on the simple construction and operation of vacuum and semiconductor rectifier devices capable of amplifying alternating signals, uses of transistors and valves in amplifier circuits, and power supplies. Negative and positive feedback is also considered, with particular emphasis on circuit descriptions of the more common oscillator types that produce or do not produce sinusoidal waves. The book concludes with a chapter on laboratory test equipment such as cathode-ray oscilloscopes, alternating current electronic voltmeters, low-frequency signal generators, and Q-meters. This book is written specifically for technicians in the electrical engineering industry.

  • The Control of Fat and Lean Deposition

    • 1st Edition
    • K.N. Boorman + 2 more
    • English
    The Control of Fat and Lean Deposition is a collection of papers dealing with the methods of influencing fat and lean deposition in whole animals, such as the use of the immune response, the use of exogenously applied materials, transgenesis, or the diet itself. The papers also consider the results of fat manipulation and lean deposition on meat quality to achieve suitabilty for human consumption. Some papers review the hormonal regulation of muscle protein synthesis, degradation, and cell growth, noting that muscle protein turnover involves the regulation of cellular growth and metabolism of the whole body. Another paper investigates the surge in lipid accumulation during fattening, as well as the correlation between changes in flux or enzyme activities in growing animals to changes in lipid accretion. One paper examines the responsiveness of prenatal development of key tissues, such as skeletal tissue and adipose, to nongenetic influences. The paper also analyzes how such responsiveness influence the rate and composition of postnatal growth. Another paper discusses the observation that reducing fat content especially on the muscle tissue itself can adversely affect the eating quality and tenderness of meat. The collection is suitable for veterinarians, livestock growers, and researchers engaged in food processing and preservation.

  • Solid-State Circuits

    Electrical Engineering Divison
    • 1st Edition
    • G. J. Pridham
    • N. Hiller
    • English
    Solid-State Circuits provides an introduction to the theory and practice underlying solid-state circuits, laying particular emphasis on field effect transistors and integrated circuits. Topics range from construction and characteristics of semiconductor devices to rectification and power supplies, low-frequency amplifiers, sine- and square-wave oscillators, and high-frequency effects and circuits. Black-box equivalent circuits of bipolar transistors, physical equivalent circuits of bipolar transistors, and equivalent circuits of field effect transistors are also covered. This volume is divided into three sections comprised of 11 chapters and begins with an introduction to the basic physics of bulk semiconductors, diodes, and transistors, along with the construction and characteristics of devices and integrated circuits. Physics is kept to the minimum necessary for the understanding of devices. Attention then turns to the fundamental use of semiconductors in rectifier, amplifier, and oscillator circuits. The high frequency use of transistors is given consideration, and in all examples designs from device characteristics are included. The remaining chapters focus on the development of equivalent circuits of transistors. This approach highlights the alternating current operation of devices, and some of the more sophisticated circuits using semiconductor devices are demonstrated. This book will be of interest to students and practitioners of electronics and electrical engineering.

  • Modest Technologies for a Complicated World

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • Roberto Vacca
    • English
    Modest Technologies for a Complicated World focuses on intermediate or alternative technologies capable of making our complex society more rational, simpler, and more modest through the attainment of equilibrium in the socio-political situation and also in the demographic, energy, agricultural, soil preservation, exploitation of resources, and recycling processes. This book outlines the conditions that must be satisfied and the precautions that have to be taken in order to implement modest technological innovations in the third world—as well as in the first or the second—on the basis of concrete and pragmatic evaluations. This volume is comprised of 14 chapters and begins with a historical overview of modest technology and how it can address global problems such as food shortage and malnutrition. The role of modest technologies as instruments of international aid and in promoting a possible New International Economic Order is then discussed. The following chapters consider the debate concerning the neutrality of science and technology; lack of innovation as a cause of economic crisis; and arguments about the theory and practice of international activities of technological cooperation and assistance. Strategies for the introduction of modest technologies are also proposed. This book will be of interest to sociologists, economists, and decision makers.

  • Fundamental Principles of Heat Transfer

    • 1st Edition
    • Stephen Whitaker
    • English
    Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.

  • Estimating for Heating and Ventilating

    • 3rd Edition
    • J.J. Barton
    • English
    Estimating for Heating and Ventilating, Third Edition discusses various concerns regarding heating and ventilating system with an emphasis on cost estimation. The book is comprised of eight chapters that tackle a specific area in heating and ventilating systems. The first chapter tackles the principles and elements of estimating, while the second chapter deals with specifications and drawings. Chapter 3 tackles the materials involved, and Chapter 4 talks about estimating the labor requirements. Chapter 5 discusses the preparation of tender, and Chapter 6 presents notes on costing. Chapter 7 covers builder’s work, and Chapter 8 deals with the estimation of annual running cost. The book will be of great help to engineers, architects, and building administrators who are mostly involved in designing, constructing, and maintaining building systems.

  • Metallurgy of Superconducting Materials

    Treatise on Materials Science and Technology, Vol. 14
    • 1st Edition
    • Thomas Luhman + 1 more
    • English
    Treatise on Materials Science and Technology, Volume 14: Metallurgy of Superconducting Materials covers the practical use of metallurgy of superconducting materials. The book discusses the phenomenon of superconductivity; the theory of superconductors; the applications of superconductivity and the demands these applications make on materials' properties and requirements. The text also describes the metallurgy of niobium-titanium alloy conductors; the physical metallurgy of A15 compounds; and the electron microscopy of superconducting materials. The metallurgy of conductors made from A15 material, the properties required, as well as the development of superconductors for ac power transmission are considered. The book further tackles the metallurgy of niobium surfaces, and the effects of radiation on superconductors. Metallurgists, physicists, materials scientists, materials engineers, and graduate students studying superconductors will find the book invaluable.

  • High Temperatures in Aeronautics

    Proceedings of the Symposium Held in Turin to Celebrate the 50th Anniversary of the Laboratorio di Aeronautica, Politecnico di Torino, 10-12 September 1962
    • 1st Edition
    • Carlo Ferrari
    • English
    High Temperatures in Aeronautics is a compilation of the proceedings of the Symposium on High Temperatures in Aeronautics held in Turin, Italy, on September 10-12, 1962. The symposium provided a forum to discuss the applications of high temperatures in aeronautics and covers topics ranging from supersonic combustion to non-equilibrium flow through a nozzle, along with similarity parameters in radiation gas-dynamics and photoionization upstream of a strong shock wave. This volume is comprised of 17 chapters and begins with an overview of the effects and consequences of high temperature in aeronautics, followed by an analysis of experimental results for the dissociation of diatomic gases. A theoretical and experimental investigation of mixing and supersonic combustion is then presented, focusing on inviscid flow fields with a finite rate chemistry for a hydrogen-air reaction. Turbulent mixing for flows with large density gradients having no chemical reaction is also considered, and the results of experiments in supersonic combustion are discussed. Subsequent chapters deal with silicon nitride, its properties, and its potential use at elevated temperatures; materials problems at high temperature; and the corrosion of refractory alloys by oil ash containing vanadium. This monograph will be of interest to students, engineers, and experimental workers in the fields of astronautics and aeronautical engineering.

  • Fluidized Bed Boilers

    Design and Application
    • 1st Edition
    • Prabir Basu
    • English
    Fluidized Bed Boilers: Design and Application attempts to address the need for a single source of information covering all major areas of fluidized bed boiler design and operation. It is based on the International Workshop on Design and Operation of Atmospheric Pressure Fluidized Bed Boilers, organized by the Center for Energy Studies, Technical University of Nova Scotia in Halifax on 24-45 June 1983. The volume begins by presenting a simplified approach to the design of a fluidized bed boiler and an overview of problems in fluidized-bed combustion (FBC). These are followed by separate chapters on the equations and concepts needed to estimate key hydrodynamic parameters; the key factors and terms to be considered in selecting FBC for specific applications; and principles in the design of air distributors for a fluidized bed boiler. Subsequent chapters discuss heat transfer to surfaces in fluidized beds; the pollution control of fluidized bed combustion of solid fuels; and materials selection in atmospheric fluidized bed combustion systems. The final two chapters are devoted to applications. These include the operational and performance results of TVA’s 20-MW Atmospheric Fluidized Bed Combustion (AFBC) Pilot Plant in Kentucky; and the performance of Canada's first commercial FBC boiler plant, located at CFB Summerside, PEI.

  • Energetic Processes in Follow-Up Electrical Control Systems

    International Series of Monographs on Electronics and Instrumentation
    • 1st Edition
    • A. A. Bulgakov
    • D. W. Fry + 1 more
    • English
    Energetic Processes in Follow-Up Electrical Control Systems deals systematically with the fundamental energetic problems of the harmonic regime in follow-up electrical control systems. This book discusses the energetics of control systems under no-load conditions; loading by a static torque proportional to velocity; and loading by the static torque of dry friction. The effect of loading on the dynamic characteristics of follow-up control systems and choice of rational design parameters are also covered in this text, including specific points in the theory and energetics of the harmonic regime in follow-up electrical control systems. This publication is a useful reference to students and individuals who intend to gain extensive knowledge on the follow-up electrical control systems.

  • Fatigue Design

    International Series on the Strength and Fracture of Materials and Structures
    • 2nd Edition
    • Carl C. Osgood
    • D. M. R. Taplin
    • English
    Fatigue Design, Second Edition discusses solutions of previous problems in fatigue as controlled by their particular conditions. The book aims to demonstrate the limitations of some methods and explores the realism and validity of the resulting solutions. The text is comprised of four chapters that tackle a specific area of concern. Chapter 1 provides the introduction and covers the scope, level, and limitations of the book. Chapter 2 deals with the characteristics of design approach, and Chapter 3 talks about the prediction of fatigue life. The last chapter discusses the general factors in fatigue. The book will be of great interest to researchers and professionals concerned with fatigue analysis, such as engineers and designers.

  • Pressure Diecasting

    Metals — Machines — Furnaces
    • 1st Edition
    • B. Upton
    • English
    Pressure Diecasting, Part 1: Metals-Machines-Furn... covers topics on surface treatments, joining methods, process practices, inspection techniques, and many other features concerned with materials engineering. Organized into six chapters, this book first explains the process of pressure diecasting. Subsequent chapters then discuss the pressure diecasting alloys and machines. Other chapters describe furnaces used in pressure diecasting and the assessment of their performance; health and safety in pressure diecasting foundries; and some applications of statistics to pressure diecasting foundry variables. Readers will find this book useful in developing his excellence and practices in the field.

  • Newnes Mechanical Engineer's Pocket Book

    • 1st Edition
    • Roger Timings + 1 more
    • English
    Newnes Mechanical Engineer's Pocket Book is an easy to use pocket book intended to aid mechanical engineers engaged in design and manufacture and others who require a quick, day-to-day reference for useful workshop information. The book is a compilation of useful data, providing abstracts of many technical materials in various technical areas. The text is divided into five main parts: Engineering Mathematics and Science, Engineering Design Data, Engineering Materials, Computer Aided Engineering, and Cutting Tools. These main sections are further subdivided into topic areas that discuss such topics as engineering mathematics, power transmission and fasteners, mechanical properties, and polymeric materials. Mechanical engineers and those into mechanical design and shop work will find the book very useful.

  • Applied Mechanics for Engineers

    The Commonwealth and International Library: Mechanical Engineering Division
    • 1st Edition
    • C. B. Smith
    • N. Hiller + 1 more
    • English
    Applied Mechanics for Engineers, Volume 1 provides an introduction to mechanics applied to engineering. The worked examples correspond to the first year of the Ordinary National Certificate in Engineering, which are supported with theories discussed in this book. The calculations in this text have all been made with the assistance of a slide rule and it is recommended that the reader acquire a slide rule to make full use of this publication. The topics covered include forces and moments; beams, shear force, and bending moment diagrams; velocity and acceleration; friction; and work, power, and energy. The gas laws; vapors, steam-engine, and boiler; and internal combustion engines are also deliberated in this text. This volume is valuable to engineering students, as well as researchers conducting work on applied mechanics.

  • Liquid Fuels

    The Commonwealth and International Library of Science, Technology, Engineering and Liberal Studies: Metallurgy Division
    • 1st Edition
    • D. A. Williams + 1 more
    • H. M. Finniston + 2 more
    • English
    Liquid Fuels discusses the properties, classification, manufacturing, and practical use of liquid fuels. The book is organized into 10 chapters discussing the various aspects of liquid fuels, from source to storage. Chapters 1 and 2 present the main source of liquid fuels and other sources such as oil shales and coal. Chapter 3 illustrates the physical and chemical tests used to determine the properties of liquid fuels and the significance of these properties to the practical applications of the different types of fuels. Fuels for spark and compression ignition engines are discussed in Chapters 4 and 5. Chapter 6 presents the combustion and atomization of fuel oils. Chapters 7 to 9 enumerate the industrial and household uses of liquid fuels. The final chapter deals with the handling and storage of liquid fuels. Students of chemical engineering and metallurgy and people working at industries requiring the use of liquid fuels in their manufacturing processes will find the book useful.

  • Materials Data for Cyclic Loading

    Aluminium and Titanium Alloys
    • 1st Edition
    • Chr. Boller + 1 more
    • C. Laird
    • English
    Materials Data for Cyclic Loading, Part D: Aluminium and Titanium Alloys presents materials data for cyclic loading which provide the basis for materials assessment by direct comparison of data or characteristic values and for estimating the crack initiation lives of aluminum and titanium alloys under constant and variable amplitude loading. The data include stress-strain curves, strain life curves, and mean stress parameter life curves for cyclic loading. Each data sheet takes up a maximum of four pages. The first page gives a description of the material and testing procedure. The chemical composition is always given in weight percent and corresponds to the values given in the literature referred to. The second and third pages show the diagrams for: stress-strain curves for monotonic and cyclic loading; strain life curve;, and mean stress (damage) parameter life curve according to the parameter of Smith, Watson and Topper. Unless indicated otherwise in the plots, the experiments were carried out at room temperature in laboratory air. The diagrams for the stress-strain relationships contain at the most three curves, one for monotonic loading and two for cyclic loading, the latter being evaluated from incremental step tests and constant amplitude tests. All three curves can be described approximately by an analytical function. This book will be of interest to materials scientists.

  • Instrument Technology

    Measurement of Pressure, Level, Flow and Temperature
    • 3rd Edition
    • E. B. Jones
    • English
    Instrument Technology, Volume 1 focuses on the instruments used in the measurement, recording, and control of critical variables in industrial processes. More specifically, measurements of pressure, liquid level in a tank or vessel, flow, and temperature are discussed. Instruments are classified according to the physical principle upon which they are based. The discussion begins by introducing the reader to the system of units of measurement used throughout the text. This topic is followed by four chapters, each dealing largely with the mathematics and physics of the instruments, which are classified according to the decimal system. The first chapter describes the principles on which the measurement of pressure and the transmission of force by a fluid depend. Before considering the actual methods of measuring pressure, the book first explains the difference between absolute and differential pressure. The second chapter discusses how the level of liquid in a tank or vessel is measured using direct methods and pressure-operated types. The third chapter focuses on the measurement of flow using quantity meters and rate-of-flow meters. The final chapter is concerned with temperatures measured on different thermometers and the two fixed points used to compare such measurements: the lower fixed point (ice-point) and the upper fixed point (steam-point). This book is intended for instrument and chemical engineers, as well as for students studying both craftsmen and technician courses.

  • One-Dimensional Compressible Flow

    Thermodynamics and Fluid Mechanics Series
    • 1st Edition
    • H. Daneshyar
    • W.A. Woods
    • English
    One-Dimensional Compressible Flow explores the physical behavior of one-dimensional compressible flow. Various types of flow in one dimension are considered, including isentropic flow, flow through a convergent or a convergent-divergent duct with varying back pressure, flow with friction or heat transfer, and unsteady flow. This text consists of five chapters and begins with an overview of the main concepts from thermodynamics and fluid mechanics, with particular emphasis on the basic conservation equations for mass, momentum, and energy that are derived for time-dependent flow through a control volume. The chapters that follow provide a basis for understanding steady flow with area change, friction, or heat transfer. A method for solving unsteady flow problems is described in the final chapter, which also discusses the propagation of small disturbances and unsteady flow with finite changes in fluid properties. This book will be useful to senior students pursuing a degree course in mechanical engineering and to engineers in industry.

  • Production Gas Carburising

    The Pergamon Materials Engineering Practice Series
    • 1st Edition
    • G. Parrish + 1 more
    • D. W. Hopkins + 2 more
    • English
    Production Gas Carburising discusses the aspects of gas carburising for practical application. The book covers the fundamentals up to the advance concepts of gas carburising. The first few chapters tackle the basic aspects of gas carburising, including its history and fundamental principles. Later chapter covers the much more advance concepts. The topics this book covers include reasons for case carburising; hardness and hardenability; residual stress; carburising theory; control for the carburising process; quality control; and aspects of safety. Professionals whose work includes carburising, such as design engineers, will find this book of great interest.

  • Heat Pump Technology

    • 1st Edition
    • Hans Ludwig Von Cube + 1 more
    • E. G. A. Goodall
    • English
    Heat Pump Technology discusses the history, underlying concepts, usage, and advancements in the use of heat pumps. The book covers topics such as the applications and types of heat pumps; thermodynamic principles involved in heat pumps such as internal energy, enthalpy, and exergy; and natural heat sources and energy storage. Also discussed are topics such as the importance of the heat pump in the energy industry; heat pump designs and systems; the development of heat pumps over time; and examples of practical everyday uses of heat pumps. The text is recommended for those who would like to know more about heat pumps, its developments over time, and its varying uses.

  • Pneumatic Conveying Design Guide

    • 1st Edition
    • David Mills
    • English
    Pneumatic Conveying Design Guide is a guide for the design of pneumatic conveying systems and includes detailed data and information on the conveying characteristics of a number of materials with a wide range of properties. This book includes logic diagrams for design procedures and scaling parameters for the conveying line configuration. It also explains how to improve the performance of pneumatic conveyors by optimizing, uprating, and extending the system or adapting it for a change of material. This book consists of 15 chapters divided into three sections and opens with an overview of the state of the art on pneumatic conveying, along with definitions of the terms used in pneumatic conveying. The next chapter describes the various types of pneumatic conveying systems and the parameters that influence their capabilities in terms of material flow rate and conveying distance. The discussion then turns to feeding and discharging of the conveying line; selection of a pneumatic conveying system for a particular application; and design procedures for pneumatic conveying system. The theory and use of compressed air in pneumatic conveying are also considered, along with the effect of material properties on conveying performance; troubleshooting; and operational problems and some solutions. The final chapter is devoted to the use of bench-scale test methods to determine the material properties relevant to pneumatic conveying. This monograph is intended for designers and users of pneumatic conveying systems.

  • Powder Metallurgy of Superalloys

    Butterworths Monographs in Materials
    • 1st Edition
    • G. H. Gessinger
    • English
    Powder Metallurgy of Superalloys details the advancement of powder metallurgy in the context of producing superalloys. The book is comprised of nine chapters that cover the underlying principles of superalloys produced through powder metallurgy. The text first covers concerns in pre-alloyed dispersion-free powders, such as powder production and characterization; powder consolidation methods; and quality control and non-destructive evaluation of P/M superalloys. The next chapter talks about oxide-dispersion-str... superalloys. Next, the book discusses joining techniques for P/M superalloys and the practical applications of P/M superalloys. The title will be of great use to professionals in the materials manufacturing industry.

  • Stability in the Dynamics of Metal Cutting

    • 1st Edition
    • Volume 22
    • S.T. Chiriacescu
    • English
    Numerous models have been proposed for the study of the dynamic behaviour of cutting tools. An analysis of the main works published over the past 20 years reveal a lack of general methodology in the mathematical modelling of the dynamic cutting process (CP) and in the elastic structure (ES), as well as the absence of efficient and general methods for identifying the conditions under which the amplitudes of the vibration chatter between tool and workpiece can become problematic.This book provides a thorough review on the mathematical modelling and stability analysis of the dynamic machining system, presenting solutions for the practical problems that can be encountered. The practical points of the stability and instability of the DMS are discussed, together with various aspects of the modelling and identification of the CP and ES systems. The latest findings are examined in the context of a general study using matrix equations. Such a study on the matrix method is timely in view of the rapid spread in the use of mini and micro-computers.Base... on the matrix equations of the CP and ES systems, the general equations of the DMS with time-invariant parameters are established, and various procedures for the actual stability analysis of this system are presented. Many examples are accompanied by illustrations which also provide adequate practical instructions for other problems in the stability analysis of the DMS. The last part of the book deals with the modelling and stability analysis of the DMS with time-varying parameters, random parameters and random input. The work is addressed primarily to those interested in the design and exploitation of machine tools in both industry and research. It will also be of interest to applied mathematicians, and can be used as a reference book for advanced courses in mechanical engineering.

  • Information Technology Serving Society

    • 1st Edition
    • Robert Lee Chartrand + 1 more
    • English
    Information Technology Serving Society focuses on the potential roles of information technology in shaping society, including advances in the capabilities of computers, progress of processes in information transfer, and implementation of information technology control measures. The selection first discusses information transfer, as well as the benefits and risks of the relationship of computers and human, the need for information policy, and challenges in information technology. The book then takes a look at information policy and technology in transition. Topics include developments in information policy and technology, applications of computers to social functions, and use of data bases in time-sharing services. The publication examines the combination of computing power and human ingenuity, including the value of communications, role of automation, and voice command recognition. The text also underscores how the use of computers has improved the processes of information gathering, sharing, and retrieval in the congress and senate. The need for the government to impose regulations on information technology is emphasized. The selection is a must for readers interested in the developments and applications of information technology.

  • Properties and Applications of Transistors

    • 1st Edition
    • J. P. Vasseur
    • English
    Properties and Applications of Transistors focuses on the progress in the applications of transistors, including conductivity, frequencies, valves, and transistor noise. The book first offers information on the physical principles of the transistor and general discussion of linear two-ports. Topics include conductivity of semiconductors, junction transistor, other types of transistors, relations between current and voltage in a linear two-port, relations between the different sets of parameters representing a two-port, and elements of matrix algebra. The text then examines transistor characteristics, including small-signal characteristics at medium frequencies; measurement of the elements of the equivalent circuit; and analogies between transistors and valves. The publication ponders on the transistor as a linear amplifier and bias circuits. Concerns include drift of the working point, calculation of the stability factor, tandem amplifiers, stabilization by compensation of the saturation current, neutralization of a transistor, and measurement of power gain. The manuscript also reviews transistor noise, as well as normal noise in a transistor, comparison with valves, and transistor abnormal noise at low frequencies. The text is a dependable source of data for readers and engineers interested in the properties and applications of transistors.

  • Problems of Technological Plasticity

    • 1st Edition
    • Volume 38
    • B. Druyanov + 1 more
    • English
    In this book the classical rigid-plastic model of deformed workpiece and the characteristic (slipline) method of analysis is assumed. The rigid-plastic solid assumption is deemed reasonable for the problems of technological plasticity with large scale plastic flow, where small elastic stains are negligible. Along with classical results of the theory of plasticity the book includes many original analytical and numerical solutions of the problems of technological plasticity obtained by the authors in Russia and unknown for most western readers. The results of the analyses are given by analytical formulae and many graphs and tables, so the book will be useful for the practical and research engineers. It may also be used as a textbook by graduate students and engineers.

  • Fluid Dynamics Transactions

    Symposium · Jabłona · September 1961
    • 1st Edition
    • W. Fiszdon
    • English
    Fluid Dynamics Transactions, Volume 1 is a compilation of papers presented at the Fifth Symposium on Fluid Dynamics held in Poland from August 26 to September 2, 1961. The symposium provided a forum for discussing developments in fluid dynamics based on the following topics: mathematical methods, hypersonic flow, rarefied gas dynamics, and magnetohydrodynamics... This volume is comprised of 26 chapters and begins by presenting equations for gas dynamics and highlighting some of applications of the general results. The discussion then turns to Cauchy's problem for the compressible flow of the simple wave type; the use of exact numerical methods for the solution of boundary layer problems; and the effect of surface catalytic efficiency on stagnation point heat transfer. A geometric method of classifying solutions of gas dynamics using certain space and the time-space Lie transformation groups is described. Subsequent chapters explore supersonic flow past blunt bodies; application of the Monte Carlo method to the analysis of rarefied gas flows; and fluid-fluid displacement in a porous medium. This book will be a useful resource for engineers and other scientists interested in fluid dynamics.

  • Glass Reinforced Plastics

    • 1st Edition
    • Brian Parkyn
    • English
    Glass Reinforced Plastics discusses several areas in the production of glass reinforced plastics. The 20 chapters of the book are organized into four parts — introduction, end uses, materials, and engineering design. The first part covers the historical background of glass reinforced plastics. Part II talks about the various application of glass reinforced plastics, such as in constructions, boat hulls, and chemical plants. Part III covers the materials, which include resin systems, reinforcement, and specifications. Part IV deals with the engineering design concerns, such as nature of composites, weathering, and fatigue. The text will be of great use to researchers and practitioners in the field of materials science.

  • Engineering Properties of Soils and Rocks

    • 3rd Edition
    • F. G. Bell
    • English
    Engineering Properties of Soils and Rocks, Third Edition serves as a guide to the engineering properties and behavior of soils and rocks. The text also complements other texts on rock and soil mechanics. The book covers topics such as the properties and classification of soils such as tills and other kinds of soils related to cold climates, tropical soils, and organic soils such as peat. The text also includes the engineering behavior and properties, classification and description, discontinuities, and weathering of rocks and rock masses. The monograph is recommended for engineers who would like to know about the properties of soils and rocks and the application of their study in the field of engineering.

  • Eutectic Solidification Processing

    Crystalline and Glassy Alloys
    • 1st Edition
    • Roy Elliott
    • English
    Eutectic Solidification Processing: Crystalline and Glassy Alloys deals with solidification theory and its application to eutectic processing of crystalline and glassy alloys. The underlying theme is an analysis of the different paths taken by the liquid-solid transformation as the cooling rate increases and a description of the structure and properties of the solid formed, ranging from equilibrium to metastable phase formation in castings, to metallic glass formation in splat quenched ribbons. This text has seven chapters; the first of which describes the main characteristics of the liquid-solid transformation. The chapters that follow show how control over composition, trace impurities, heat flow and cooling rate, and nucleation and growth gives rise to a wide range of solidification structures. Models of the nucleation and growth of eutectic and primary phases are analyzed and used to explain how cast microstructures are formed. Aluminum casting alloys and all types of cast iron are discussed, along with primary phase formation, the dependence of the extent of segregation on solidification conditions, and the practice of segregation prevention during solidification. This book also describes the importance of fluid flow in producing macroscopic segregation in large ingots and considers ways of minimizing this defect. Finally, this book gives a brief account of the various types of metallic glasses, their fabrication, important properties, and potential applications. This book will be of interest to materials scientists and industrial materials engineers.

  • Chemical Metallurgy

    • 1st Edition
    • J. J. Moore + 2 more
    • English
    Chemical Metallurgy provides an understanding of the fundamental chemical principles and demonstrates the application of these principles to process metallurgy and corrosion protection. The book discusses the fundamental chemical principles involved in metallurgical reactions. Since it is felt that the understanding of quantitative thermodynamics and its application to process metallurgy often prove to be a major problem area for students, example calculations and exercises are included at the end of each section in Chapter 2. The final three chapters deal with the applications of the chemical principles to the extraction and refining of metals, metal melting and recycling, and metallic corrosion. The book is intended as an introductory text for metallurgy students studying for first degrees, TEC higher diplomas and certificates, and Graduateship of the Institution of Metallurgists. It should also be of use to scientists and engineers entering employment in the metallurgical and metal finishing industries or the teaching profession.

  • Hydraulics and Pneumatics

    A technician's and engineer's guide
    • 1st Edition
    • Andrew Parr
    • English
    Hydraulics and Pneumatics: A Technician's and Engineer's Guide provides an introduction to the components and operation of a hydraulic or pneumatic system. This book discusses the main advantages and disadvantages of pneumatic or hydraulic systems. Organized into eight chapters, this book begins with an overview of industrial prime movers. This text then examines the three different types of positive displacement pump used in hydraulic systems, namely, gear pumps, vane pumps, and piston pumps. Other chapters consider the pressure in a hydraulic system, which can be quickly and easily controlled by devices such as unloading and pressure regulating valves. This book discusses as well the importance of control valves in pneumatic and hydraulic systems to regulate and direct the flow of fluid from compressor or pump to the various load devices. The final chapter deals with the safe-working practices of the systems. This book is a valuable resource for process control engineers.

  • Microcomputers for Process Control

    The Pergamon Materials Engineering Practice Series
    • 1st Edition
    • R. C. Holland
    • English
    Microcomputers for Process Control provides an introduction to microprocessor technology for process monitoring and control. The book begins with an overview of microprocessor applications in areas such as consumer products, factories, and telecommunications. This is followed by separate chapters that discuss microcomputer technology; electrical interface to enable plant monitoring and control by microcomputer; microcomputer system hardware and software; VDU-based plant monitoring systems; and methods of computer control. This book is aimed at practicing engineers in industry who wish to acquire a base of understanding of this technology and also to learn how microcomputers can actually be applied in real plant situations. Considerable emphasis is given to plant measurements, interfacing techniques and applications of microcomputers for plant monitoring and control. No prior knowledge of microprocessor technology is assumed, but some awareness of plant measurement and control problems will assist the reader. Students undertaking engineering courses which include microelectronics or process control studies should also find the text helpful.

  • Conservation of Library and Archive Materials and the Graphic Arts

    • 1st Edition
    • Guy Petherbridge
    • English
    Conservation of Library and Archive Materials and the Graphic Arts is the proceeding of the Cambridge 1980 International Conference on the Conservation of Library and Archive Materials and the Graphic Arts. This symposium explores the advancements in the field of conservation of historic and artistic works. The book covers related topics such as the employment of different methods for the preservation of paper such as bleaching and alkaline buffering; the repair, relaxation, binding, handling, and display of articles made of vellum and parchment; and the conservation of books and binders. The text is recommended for archivists, librarians, and museum curators who are interested in the scientific advances in the field of conservation and how it can help them in their profession.

  • Modern Physical Metallurgy

    • 4th Edition
    • R. E. Smallman
    • English
    Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.

  • Wind Forces in Engineering

    • 2nd Edition
    • Peter Sachs
    • English
    Wind Forces in Engineering, Second Edition covers the various aspects, principles, and engineering applications of wind forces. This book is composed of 10 chapters and starts with an introduction to the history of wind forces. The subsequent chapters consider the wind speeds for various topographies; particular "shape factors" for general and special structures; oscillatory wind forces of a random or single-frequency type; and the dynamic response of structures to oscillatory wind forces. Other chapters deal with specific structures, such as buildings, bridges, towers, radar antennas, for static and dynamic wind loadings. The final chapter provides the Code of Practice which has been republished since 1972, including those for Australia, Canada, Great Britain and the U.S.A. These codes do not provide similar responses and are all essentially in a transitional state between the old static force concept and an improved statistical analysis to be based on more experimental evidence. This book will prove useful to engineers and researchers.

  • Powtech '83 Particle Technology

    Event No. 280 of the EFCE
    • 1st Edition
    • Sam Stuart
    • English
    Powtech '83: Particle Technology focuses on the techniques and processes involved in the handling and processing of powders and other related products. The book presents studies that show the composition, characteristics, value, and strength of materials when subjected to different conditions in different environments. Divided into five parts with 32 chapters, the book features the work of contributors who have conducted research on the composition and chemical processes involved in particle technology. The pieces that are presented feature experiments and tests conducted on different materials, such as coal and liquids. These experiments are supported by lengthy discussions coupled with numerical representation to validate the claims of authors in their respective concerns. Although the authors have their own topics to cover, they will manage to capture the interest of physicists, chemists, and mechanical and civil engineers who are interested in particle technology. Taking into consideration the value of information presented in the book, these professionals will find the book a reliable source of data in their profession and in their studies.

  • Lipids in Foods

    Chemistry, Biochemistry and Technology
    • 1st Edition
    • Frank D Gunstone + 1 more
    • English
    Lipids in Foods: Chemistry, Biochemistry and Technology provides basic information on the biochemistry and technology of the fatty acids or lipids. This book notes that natural and processed fats and oils, whether of animal or vegetable origin, play a significant role in the economy of several countries including both oil-producers and oil-users. These materials are used extensively, but not exclusively, in the food industry. The first 10 chapters cover the basic chemistry and biochemistry of the fatty acids and their natural derivatives. These topics include an account of the chemical structure, separation, analysis, biochemistry, physical properties, chemical properties, and synthesis of these compounds. The remaining chapters include the recovery of fats and oils from their sources and the processes of refining, bleaching, hydrogenation, deodorization, fractionating, and interesterification. A segment is devoted to margarines and shortenings and to the problems of flavor stability and antioxidants. This text will be valuable to students wishing to know more about lipids and to those involved in this field of study.

  • Mechanical Seals

    • 3rd Edition
    • E. Mayer
    • B. S. Nau
    • English
    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and cost effectiveness. The next chapter is devoted to test rigs used to establish the effect of the various seal parameters on the behavior of face seals. Special test rigs used to establish leakage, wear, friction losses, and temperature distributions for various material combinations, rubbing speeds, pressures, fluid media, and temperatures are highlighted. The following chapters explain primary leakage through the seal gap between the faces of the seals; factors that contribute to seal wear; friction and power of a mechanical seal; relationship of leakage to wear and friction of a balanced face seal; and importance of seal reliability and operating safety. The final chapter explores particularly interesting sealing problems together with the use of special accessories such as heat exchangers; magnetic and cyclone separators; and techniques such as cooling and auxiliary circulation. This book will be useful to mechanical engineers as well as seal designers and seal users.

  • Electrodeposition of Alloys

    Principles and Practice
    • 1st Edition
    • Abner Brenner
    • English
    Electrodeposition of Alloys: Principles and Practice, Volume II: Practical and Specific Information provides sufficient information for preparing and operating alloy plating baths. This book is organized into five sections encompassing 21 chapters that also consider the facts and theory of alloy plating. The five sections discuss the five types of alloy plating system with respect to the plating variables. Each section deals with the fundamental bases of alloy deposition, which have been summed up in six principles. This book further examines the role of diffusion in alloy deposition and the role of the density versus potential relations in alloy deposition, as well as certain misconceptions regarding their value in alloy deposition have been pointed out. This book will prove useful to electrochemists, researchers, and electrochemistry teachers and students.

  • Elasticity

    Theory and Applications
    • 1st Edition
    • Adel S. Saada
    • Thomas F. Irvine + 2 more
    • English
    Elasticity: Theory and Applications reviews the theory and applications of elasticity. The book is divided into three parts. The first part is concerned with the kinematics of continuous media; the second part focuses on the analysis of stress; and the third part considers the theory of elasticity and its applications to engineering problems. This book consists of 18 chapters; the first of which deals with the kinematics of continuous media. The basic definitions and the operations of matrix algebra are presented in the next chapter, followed by a discussion on the linear transformation of points. The study of finite and linear strains gradually introduces the reader to the tensor concept. Orthogonal curvilinear coordinates are examined in detail, along with the similarities between stress and strain. The chapters that follow cover torsion; the three-dimensional theory of linear elasticity and the requirements for the solution of elasticity problems; the method of potentials; and topics related to cylinders, disks, and spheres. This book also explores straight and curved beams; the semi-infinite elastic medium and some of its related problems; energy principles and variational methods; columns and beam-columns; and the bending of thin flat plates. The final chapter is devoted to the theory of thin shells, with emphasis on geometry and the relations between strain and displacement. This text is intended to give advanced undergraduate and graduate students sound foundations on which to build advanced courses such as mathematical elasticity, plasticity, plates and shells, and those branches of mechanics that require the analysis of strain and stress.

  • Marine Steam Boilers

    • 4th Edition
    • James H. Milton + 1 more
    • English
    Marine Steam Boilers: Fourth Edition deals with the involved concepts, parts and construction, usage and maintenance, and the future direction of steam boilers. The book covers topics such as the history of steam boilers; theoretical development of steam boilers; and the materials and methods used in their construction. Also covered are the types of boilers - the tank-type boiler, which includes horizontal and vertical boilers; water tube boilers such as the Foster Wheeler boiler, Babcock & Wilcox boilers, and combustion engineering boilers; and dual-fired boilers. The text is recommended for marine engineers who would like to know more about boilers, its different types and the advantages of each, and their operation.

Related subjects