Skip to main content
View Cart

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • High-Speed Pulse Techniques

    • 1st Edition
    • J. A. Coekin
    • P. Hammond
    • English
    High-Speed Pulse Techniques covers the many aspects of technique in digital electronics and encompass some of the more fundamental factors that apply to all digital systems. The book describes the nature of pulse signals and their deliberate or inadvertent processing in networks, transmission lines and transformers, and then examines the characteristics and transient performance of semiconductor devices and integrated circuits. Some of the problems associated with the assembly of these into viable systems operating at ultra high speed are also looked at. The book examines the transients and waveshaping in linear circuits; the steady-state and transient characteristics of the diode switch; and the two most useful diode waveshaping functions, clipping and clamping circuits. The characteristics of distributed-paramete... transmission lines with and without losses and their implications in digital systems are also considered. The book then tackles transformer pulse response; bipolar and unipolar transistor transient response; and the characteristics of subnanosecond switching diodes and of high-speed logic. The text describes the implementation of high-speed systems as well. Students and practicing electronics and computer systems engineers will find the book useful.

  • Industrial Hazard and Safety Handbook

    (Revised impression)
    • 1st Edition
    • Ralph W King + 1 more
    • English
    Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layout, causes of building failure, condition monitoring, non-destructive testing, hazard analysis, and equipment design. The working environment of employees covers air and breathing, lighting and vision, noise and hearing, heat and comfort, fatigue and rest breaks, industrial hygiene and toxicology, or personal protective clothing and devices. The text also points out that some common industrial hazards are due to poor housekeeping (greasy floors, scattered tools), slipped disc (due to wrong handling of heavy loads), falls, falling objects, static electricity, lifting tackles, and wheeled transport inside factories. The book is intended for safety specialists, managers, and engineers responsible for design, production, inspection and maintenance in industry. The book will also be helpful for insurers or lawyers whose work is concerned with industrial accidents and their consequences.

  • Fluid and Particle Mechanics

    Chemical Engineering Division
    • 1st Edition
    • S. J. Michell
    • M. Perry
    • English
    Fluid and Particle Mechanics provides information pertinent to hydraulics or fluid mechanics. This book discusses the properties and behavior of liquids and gases in motion and at rest. Organized into nine chapters, this book begins with an overview of the science of fluid mechanics that is subdivided accordingly into two main branches, namely, fluid statics and fluid dynamics. This text then examines the flowmeter devices used for the measurement of flow of liquids and gases. Other chapters consider the principle of resistance in open channel flow, which is based on improper application of the Torricellian law of efflux. This book discusses as well the use of centrifugal pumps for exchanging energy between a mechanical system and a liquid. The final chapter deals with the theory of settling, which finds an extensive application in several industrially important processes. This book is a valuable resource for chemical engineers, students, and researchers.

  • Microhydrodynamics

    Principles and Selected Applications
    • 1st Edition
    • Sangtae Kim + 1 more
    • Howard Brenner
    • English
    Microhydrodynamics: Principles and Selected Applications presents analytical and numerical methods for describing motion of small particles suspended in viscous fluids. The text first covers the fundamental principles of low-Reynolds-number flow, including the governing equations and fundamental theorems; the dynamics of a single particle in a flow field; and hydrodynamic interactions between suspended particles. Next, the book deals with the advances in the mathematical and computational aspects of viscous particulate flows that point to innovations for large-scale simulations on parallel computers. The book will be of great use to students in engineering and applied mathematics. Students and practitioners of chemistry will also benefit from this book.

  • Basic Mechanical Vibrations

    • 1st Edition
    • A J Pretlove
    • English
    BASIC Mechanical Vibrations deals with vibrations and combines basic theory with the development of useful computer programs to make design calculations. The programs in the book are written in BASIC. This book is comprised of six chapters and begins with a brief introduction to computing, with special emphasis on the fundamentals of the BASIC computer language. The chapters that follow give concise elements of vibration theory followed by problem solving examples making use of BASIC programs. The vibration analysis of engineering systems, which may be modeled by a single degree of freedom, is presented. Simple systems with damping and no damping are considered, along with systems having two and several degrees of freedom. The final chapter is concerned with bending vibrations. The text includes some subroutines for performing simple matrix operations on two-dimensional arrays that can be used in vibration calculations. This monograph will be useful to engineers who need to make vibration design calculations and to students of mechanical engineering.

  • Hydrostatic and Hybrid Bearing Design

    • 1st Edition
    • W B Rowe
    • English
    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering design and lubrication.

  • Introduction to Welding and Brazing

    The Commonwealth and International Library: Welding Division
    • 1st Edition
    • D. R. Milner + 1 more
    • R. L. Apps + 2 more
    • English
    Introduction to Welding and Brazing covers the various aspects of metal joining processes, theory, practice, and application. This book is composed of nine chapters. Considerable chapters are devoted to the processes, practice, and principles of arc, resistance, and pressure welding. A chapter describes the principles and applications of other welding processes, such as gas, thermit, and electron beam welding. The final chapters deal with the metallurgical application, practice, and principles of soldering and brazing. This book will be of value to the researchers and workers in the metal joining fields.

  • The Science, Technology and Application of Titanium

    Proceedings of an International Conference Organized by the Institute of Metals, the Metallurgical Society of Aime, and the American Society for Metals in Association with the Japan Institute of Metals and the Academy of Sciences, U.S.S.R., and Held at th
    • 1st Edition
    • R. I. Jaffee + 1 more
    • English
    The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968. The papers explore scientific and technological developments as well as applications of titanium and cover topics ranging from processing of titanium to its chemical and environmental behavior, physics, thermodynamics, and kinetics. Deformation and fracture, phase transformations and heat treatment, and alloying are also discussed. This book is comprised of 114 chapters and begins with an overview of the titanium industry in Europe and the United States. The reader is then introduced to primary and secondary fabrication of titanium; corrosion and oxidation; physical properties of titanium alloys; interaction of titanium with elements of the periodic system; and elastic interactions between dislocations and twin and grain boundaries in titanium. The crystallography of deformation twinning in titanium is also examined, along with superplasticity and transformation plasticity in titanium. The remaining chapters focus on interstitial strengthening of titanium alloys; mechanism of martensitic transformation in titanium and its alloys; phase relationships in titanium-oxygen alloys; strengthening of titanium alloys by shock deformation; and titanium hot forming. This monograph will be of interest to chemists and metallurgists.

  • Muckle's Naval Architecture

    • 2nd Edition
    • W. Muckle + 1 more
    • English
    Muckle's Naval Architecture, Second Edition is concerned with problems related to resistance, propulsion, and vibration in naval architecture. Topics include ship calculations, stability and trim, ship motions, and structural strength. This book also gives a brief reference to ship design. This text is comprised of 13 chapters; the first of which provides an overview of the function of the ship, its layout, and various types. The next chapter explains definitions, principal dimensions, and form coefficients, along with classification societies and governmental authorities that regulate ship design, construction, and safety. Various calculations that are performed to determine the form of a ship are the subject of the next chapter. Attention then turns to buoyancy, stability, and trim, along with sea and ship motions, the problem of structural strength, vibration, and resistance. The influence of rudders and control on ship movement is also discussed. Finally, this book describes the methods for determining the amount of power required to propel a ship. This book is intended primarily for practicing naval architects, marine engineers, deck officers, and all students of naval architecture.

  • Anglo–American Microelectronics Data 1968–69

    Manufacturers A–P
    • 1st Edition
    • G.W.A. Dummer + 1 more
    • English
    Anglo-American Microelectronics Data 1968-69, Volume One Manufacturers A-P covers semiconductor integrated circuits, thick and thin film technologies, and constructions outside the semiconductor integrated circuit area which come within the microelectronics range. The book discusses A.B. metal products thick film microcircuits; AMELCO series 16-701/46-701 tentative transistor-transisto... logic; and American Micro-Systems B002e low-power logic binary. The book also describes Bunker-Ramo hybrid thin-film techniques; Centralab thick film integrated circuits; and CTS Cermet microelectronics. Elliott-automation; Erie R-C and hybrid integrated circuits; and Ether engineering series 2020 operational amplifiers are also considered. Other topics include Fair Child resistor-transistor micrologic; Hawker Siddeley micropacks; and Plessey SL20 series amplifiers. Designers, buyers, and users of microelectronic devices will find the text useful.

Related subjects