Skip to main content
Elsevier

Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

  • Chipless RFID based on RF Encoding Particle

    Realization, Coding and Reading System
    • 1st Edition
    • Arnaud Vena + 2 more
    • English
    Chipless RFID based on RF Encoding Particle: Realization, Coding and Reading System explores the field of chipless identification based on the RF Encoding Particle (REP). The book covers the possibility of collecting information remotely with RF waves (RFID) with totally passive tags without wire, batteries, and chips, and even printed on paper. Despite the many benefits of RFID, deployment is still hindered by several economic and technological factors. Among these barriers are the high cost of tags, lack of reliability and security in the information contained in the RFID chip, and how tags are 'recycled.' This book focuses on the development of chipless RFID tags, representing a new family of low cost tags. With this technology information is extracted from the electromagnetic response of the tag, which depends only on its geometry. Various solutions have been developed by the authors to increase the amount of information, reduce the surface of the tag, or improve the robustness of detection. Considerations such as realization using paper substrate, the development of a low cost detection system, and measurements in a real environment have been addressed for practical implementation.

  • Granular Materials at Meso-scale

    Towards a Change of Scale Approach
    • 1st Edition
    • Bernard Cambou + 2 more
    • English
    Granular Materials at Meso-scale: Towards a Change of Scale Approach proposes a new way for developing an efficient change of scale—considering a meso-scale defined at the level of local arrays of particles. The change of scale is known to be a very interesting way to improve the modelling of mechanical behavior granular materials. In the past, studies have been proposed using a micro-scale at the grain level to perform change of scale, but limitations have been proven for these approaches. Definition and analysis of the phases are detailed, constituted by sets of meso-domains sharing the same texture characteristics. The authors propose a local constitutive model for the phases, allowing the constitutive model of the representative elementary volume to be definied from a change-of-scale approach and, finally, presenting the validation of obtained modeling on cyclic loadings.

  • Thermodynamics

    • 1st Edition
    • Jean-Paul Duroudier
    • English
    Thermodynamics includes thirteen independent volumes that define how to perform the selection and calculation of equipment involved in the thirteen basic operations of process engineering, offering reliable and simple methods. Throughout these concise and easy-to-use books, the author uses his vast practical experience and precise knowledge of global research to present an in-depth study of a variety of aspects within the field of chemical engineering. The main concepts of thermodynamics are presented in detail, and their importance is demonstrated through their various practical applications. In this volume, the author provides a general introduction into the study of thermodynamics. Across the five chapters, users will find different concepts involved in the study of energy, including systems, states, energy, laws, and their associated theorems. In addition, the author provides the methods needed for understanding the machinery used in applied thermodynamics to encourage students and engineers to build the programs they need themselves.

  • The Social Dynamics of Development

    Pergamon International Library of Science, Technology, Engineering and Social Studies
    • 1st Edition
    • David C. Pitt
    • English

  • People, Communication and Organisation

    A Case Study Approach
    • 1st Edition
    • Joseph Chilver
    • English

  • Glassblowing for Laboratory Technicians

    Including Vacuum Line Accessories and Their Applications
    • 2nd Edition
    • R. Barbour
    • English
    Glassblowing for Laboratory Technicians, Second Edition introduces the laboratory technician to the technique of glassblowing. Vacuum line accessories and their applications are described, along with the vacuum technique and interchangeable ground-glass joints. Laboratory glassworking hazards as well as intermediate and advanced glassblowing are also considered. This book is comprised of 12 chapters and opens with an overview of glass and its composition, followed by a discussion on glass tubes and rods and how they are stored. The next chapter focuses on some obvious hazards that will be encountered in glassworking, including sharp glass edges, hot glass and tools, gas and mercury, and the glassworking flame. The reader is then introduced to the laboratory workshop for glassblowing; the process of glass annealing; glass-to-metal seals; and elementary, intermediate, and advanced glassblowing. The vacuum technique is also described, along with types of pumps, vacuum gauges, and the operation of a vacuum system. The final chapter explains how a glassblowing class should be conducted. This monograph will be a useful resource for laboratory technicians and those who may be concerned with either the training of glassblowers or with glassblowing.

  • Anti-Chance

    A Reply to Monod's Chance and Necessity
    • 1st Edition
    • E. Schoffeniels
    • T Swain
    • English
    Anti-Chance: A Reply to Monod's Chance and Necessity is a critique of Jacques Monod's essay on the natural philosophy of modern biology. It explores the concepts of chance and necessity, central themes of Monod's work, and specifically whether life is the result of coincidence of diverse independent chains of causality or, on the contrary, whether it obeys the more fundamental concept of chance as proposed by the Danish School of physicists. Questions such as the chance or the inevitability of it all, the sites and sizes of the knowledge gaps and as to whether they will be filled with physics and chemistry on the one hand or seasoned with metaphysics on the other, are examined. This book is comprised of 10 chapters and begins with reflections on biology and the argument that biology can only enrich itself by abandoning a teleological or finalist mode of thought. The discussion then turns to probabilities of chance, with emphasis on three different mechanisms of the intervention of chance. Subsequent chapters focus on the link between thermodynamics and biological order; the basis for a theoretical biology and 14 propositions to which the fundamental attributes of cells can be reduced; the molecular basis of instinct; and the relationship between speech and consciousness. The applicability of cybernetics to biological systems and their component metabolic cycles is also considered, along with the structure of chance. This monograph will be of interest to scientists in fields ranging from biology and natural philosophy to physics, chemistry, and physiology.

  • Basic Electrotechnology

    • 1st Edition
    • R A Ashen
    • English
    BASIC Electrotechnology discusses the applications of Beginner's All-purpose Symbolic Instruction Code (BASIC) in engineering, particularly in solving electrotechnology-re... problems. The book is comprised of six chapters that cover several topics relevant to BASIC and electrotechnology. Chapter 1 provides an introduction to BASIC, and Chapter 2 talks about the use of complex numbers in a.c. circuit analysis. Chapter 3 covers linear circuit analysis with d.c. and sinusoidal a.c. supplies. The book also discusses the elementary magnetic circuit theory. The theory and performance of two winding transformers from an equivalent circuit approach are also tackled. The last chapter covers the electromechanical energy conversion. The text will be of great use to undergraduate students of electrical engineering.

  • Metal Forming and Impact Mechanics

    William Johnson Commemorative Volume
    • 1st Edition
    • S. R. Reid
    • English
    Metal Forming and Impact Mechanics reviews significant developments concerning the mechanics of metal forming and impact. Topics covered include the kinematics of steady plane flows in elastoplastic media; contact zone and friction coefficient in hot-rolling; and plastic deformation of porous materials. Developments in the use of superplastic alloys, the use of metal tubes as impact energy absorbers, and fracturing of explosively loaded solids are also discussed. This book has 18 chapters divided equally between the broad headings of metal forming and impact mechanics. The section on metal forming mechanics includes papers that explore an upper bound approach to metal forming processes; rotary forming of rings under kinematic constraints; and microcomputer programs for rolling and extrolling. The section on impact mechanics examines the use of elementary approximation techniques to study plastic deformation in pulse loaded structures; static and dynamic axial crushing of circular and square tubes; and shear-control fragmentation of explosively loaded steel cylinders. This monograph will be of value to structural and mechanical engineers, metallurgists, and materials scientists and technologists, as well as to those active in the field of solid mechanics.

  • Methods and Tools in User-Centred Design for Information Technology

    • 1st Edition
    • Volume 9
    • Margaret Galer + 3 more
    • English
    This book is concerned with the development of human factorsinputs to software design. The aim is to create products whichmatch the requirements and characteristics of users and whichoffer usable user interfaces. The HUFIT project - Human Factorsin Information Technology - was carried out within the EuropeanStrategic Programme for Research and Development in InformationTechnolog... (ESPRIT) with the objective of enhancing the qualityof software design within the European Community. The variety ofactivities undertaken to achieve this goal are reflected in thisbook. It describes human factors knowledge and tools forintegration in information technology supplier organisations.

  • Computer Integrated Manufacturing (CIM) in Japan

    • 1st Edition
    • Volume 21
    • V. Sandoval
    • English
    Presented in this book are some of the most relevant aspects of Computer Integrated Manufacturing (CIM) in Japan. The volume compares the development of CIM in the context of Japan as well as that of Europe and the United States. It includes studies of the implemented CIM systems in many companies. In addition, the book contains a study concerning Intelligent Manufacturing Systems (IMS), and the basis for preparation of the so-called Future Generation of Manufacturing Systems (FGMS). This volume gives a better understanding of Japanese competitiveness using advanced technology. People coming from the manufacturing industry, managers, engineers, officials and researchers will find in this book a rich source of material for understanding the crucial elements in technology development, and its actual and future implementation.

  • Advancement of Intelligent Production

    Seventh International Conference on Production/Precision Engineering, 4th International Conference on High Technology, Chiba, Japan, 15-17 September 1994
    • 1st Edition
    • E. Usui
    • English
    As we move towards the 21st century, industries are compelled to turn from "high productivity and high precision" to "more intelligent and more human-oriented technology". This volume presents the existing state of the art of production/precision engineering and illuminates areas in which future work may proceed.

  • Planning for Engineers and Surveyors

    • 1st Edition
    • F. D. Hobbs + 1 more
    • English
    Planning for Engineers and Surveyors provides an understanding of the land use and transport planning context in which the work of engineers and surveyors was carried out. It attempts to explain what the planners of land use and transport did and why. It describes the problems which planners face, the reasons why they emerged, the techniques used to develop plans, and the political as well as the technical nature of planning. The book begins with a definition of planning and a review of different popular beliefs about planners themselves. This is followed by separate chapters on the development of the planning system, including its history, institutional framework, and laws; the impact of social, economic, and physical environment on planning; and transport and communications planning. Subsequent chapters cover features of the planning process which are general to planning at different levels and of different sectors; the development of planning policies; the design implications and characteristics of a number of land uses; and the political character of planning.

  • The Commonwealth

    A New Look
    • 1st Edition
    • Andrew Walker
    • English

  • Matrix Methods Applied to Engineering Rigid Body Mechanics

    • 1st Edition
    • T. Crouch
    • English
    Explains the use of matrixes and their application to the solution of rigid body mechanics problems. Text is supported by chapters of worked examples

  • Analysis of the New Metals

    Titanium, Zirconium, Hafnium, Niobium, Tantalum, Tungsten and Their Alloys
    • 1st Edition
    • W. T. Elwell + 1 more
    • English
    Analysis of the New Metals: Titanium, Zirconium, Hafnium, Niobium, Tantalum, Tungsten and their Alloys focuses on methods for the analysis of titanium, zirconium, hafnium, niobium, tantalum, tungsten, and their alloys. Emphasis is on the procedures used in Imperial Metal Industries (Kynoch) Limited's laboratories for the analysis of these metals. These procedures include the oxide-resin procedure, solution procedure, and the point-to-plane spectrographic procedure. Comprised of six chapters, this book begins with an overview of special procedures for obtaining representative samples, including the use of titanium or zirconium sponge (Kroll process) as well as titanium granules (ICI sodium process). Subsequent chapters discuss the identification of titanium and its alloys such as aluminum, boron, calcium, carbon, and copper by means of the point-to-plane spectrographic procedure, a Fuess metal spectroscope, and chemical spot-tests; spectroscopic analysis of zirconium, zirconium alloys, and ionide-refined hafnium; and spectroscopic analysis of niobium, tantalum, tungsten, and their alloys. This monograph will be useful for undergraduate students, educators, practitioners, and researchers in metallurgy.

  • Heat Exchange in Shaft Furnaces

    • 1st Edition
    • B. I. Kitaev + 2 more
    • P. A. Young
    • English
    Heat Exchange in Shaft Furnaces focuses on the theory of heat exchanges occurring in the shaft furnace process. It covers the development and research done by experts in the field of physics, chemistry, metallurgy, and engineering. The book contains the exposition of the aspects of the theory of heat exchange in shaft furnaces and draws examples from the field of blast furnace operation. Researches by scientists; laboratory experiments; and practical results derived by workers on blast furnaces in the theory are skillfully synthesized and expounded. Topics on exchange in packed beds; heat transfer in the blast furnace; and the state of the theory of heat transfer in a blast furnace are discussed. Metallurgist, plant researchers, physicists, chemists, and engineers engaged in the design of blast furnaces will find the book invaluable.

  • Strength of Metals and Alloys (ICSMA 7)

    Proceedings of the 7th International Conference on the Strength of Metals and Alloys, Montreal, Canada, 12–16 August 1985
    • 1st Edition
    • H. J. McQueen + 2 more
    • English
    Strength of Metals and Alloys, Volume 3 (ICSMA 7) presents the proceedings of the 7th International Conference on the Strength of Metals and Alloys held in Montreal, Canada on August 12-16, 1985. The book includes papers on the work hardening of face-centered cubic single crystals; precipitation hardening; and microstructure evolution and flow stress during hot working. The text also covers papers on microstructure evolution and flow stress during hot working; the prediction of deformation textures in cubic metals; creep of copper-base shape memory alloys; and flow behavior of nickel-base superalloys at isothermal forging temperatures and strain rates. Grain refinement by recrystallization hot-rolling to achieve high strength and notch toughness in microalloyed steel plate; as well as the influence of mean stress on fatigue strength of TI-6A1-4V are also encompassed. The book further includes papers on the comparative mechanical properties of human bones; the effect of precipitation hardening on the decomposition of the solid solution in 7075 alloy during quenching; and the mechanical properties of stable and unstable austenitic stainless steels.

  • Computer Aided Process Planning (CAPP)

    2nd Edition
    • 1st Edition
    • Architecture Technology Architecture Technology Corpor
    • English
    Please note this is a Short Discount publication.Process planning involves creating detailed plans of the manufacturing steps and equipment necessary to produce a finished part.Using the variant method, CAPP groups families of parts by a structured classification and coding plan. This report summarizes the state–of–the–art and future trends in the area of CAPP.The computer is a vital part of the process planning function, which includes two different approaches. One is called the variant (similar part) method of process planning and the other is generative (expert system–based). Both will produce similar process plans. Most computer applications, however, are of the variant type, because the software is easier to develop and new process plans are based on previous ones.

  • Academic Press Library in Mobile and Wireless Communications

    Transmission Techniques for Digital Communications
    • 1st Edition
    • Ezio Biglieri + 2 more
    • English
    This book, edited and authored by world leading experts, gives a review of the principles, methods and techniques of important and emerging research topics and technologies in wireless communications and transmission techniques. The reader will: Quickly grasp a new area of research Understand the underlying principles of a topic and its application Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved

  • Principles of Nuclear Rocket Propulsion

    • 1st Edition
    • William J. Emrich Jr.
    • English
    Principles of Nuclear Rocket Propulsion provides an understanding of the physical principles underlying the design and operation of nuclear fission-based rocket engines. While there are numerous texts available describing rocket engine theory and nuclear reactor theory, this is the first book available describing the integration of the two subject areas. Most of the book’s emphasis is primarily on nuclear thermal rocket engines, wherein the energy of a nuclear reactor is used to heat a propellant to high temperatures and then expel it through a nozzle to produce thrust. Other concepts are also touched upon such as a section devoted to the nuclear pulse rocket concept wherein the force of externally detonated nuclear explosions is used to accelerate a spacecraft. Future crewed space missions beyond low earth orbit will almost certainly require propulsion systems with performance levels exceeding that of today’s best chemical engines. A likely candidate for that propulsion system is the solid core Nuclear Thermal Rocket or NTR. Solid core NTR engines are expected to have performance levels which significantly exceed that achievable by any currently conceivable chemical engine. The challenge is in the engineering details of the design which includes not only the thermal, fluid, and mechanical aspects always present in chemical rocket engine development, but also nuclear interactions and some unique materials restrictions.

  • Matlab

    A Practical Introduction to Programming and Problem Solving
    • 4th Edition
    • Dorothy C. Attaway
    • English
    MATLAB: A Practical Introduction to Programming and Problem Solving, Fourth Edition, winner of a 2017 Textbook Excellence Award (Texty), has been updated to reflect the functionality of the current version of MATLAB, including the new H2 Graphics system. It features new and revised end-of-chapter exercises, more engineering applications to help the reader learn this software tool in context, and a new section on object-oriented programming in MATLAB. MATLAB has become the standard software tool for solving scientific and engineering problems due to its powerful built-in functions and its ability to program. Assuming no knowledge of programming, this book guides the reader through both programming and built-in functions to easily exploit MATLAB's extensive capabilities for tackling engineering problems. The book starts with programming concepts, such as variables, assignments, and selection statements, moves on to loops, and then solves problems using both the programming concept and the power of MATLAB. In-depth coverage is given to input/output, a topic fundamental to many engineering applications.

  • Control of Complex Systems

    Theory and Applications
    • 1st Edition
    • Kyriakos Vamvoudakis + 1 more
    • English
    In the era of cyber-physical systems, the area of control of complex systems has grown to be one of the hardest in terms of algorithmic design techniques and analytical tools. The 23 chapters, written by international specialists in the field, cover a variety of interests within the broader field of learning, adaptation, optimization and networked control. The editors have grouped these into the following 5 sections: “Introduction and Background on Control Theory”, “Adaptive Control and Neuroscience”, “Adaptive Learning Algorithms”, “Cyber-Physical Systems and Cooperative Control”, “Applications”.The diversity of the research presented gives the reader a unique opportunity to explore a comprehensive overview of a field of great interest to control and system theorists. This book is intended for researchers and control engineers in machine learning, adaptive control, optimization and automatic control systems, including Electrical Engineers, Computer Science Engineers, Mechanical Engineers, Aerospace/Automotive Engineers, and Industrial Engineers. It could be used as a text or reference for advanced courses in complex control systems. • Collection of chapters from several well-known professors and researchers that will showcase their recent work • Presents different state-of-the-art control approaches and theory for complex systems • Gives algorithms that take into consideration the presence of modelling uncertainties, the unavailability of the model, the possibility of cooperative/non-coop... goals and malicious attacks compromising the security of networked teams • Real system examples and figures throughout, make ideas concrete

  • Flow Measurement

    By Square-Edged Orifice Plate Using Corner Tappings
    • 1st Edition
    • W. J. Clark
    • English
    Flow Measurement By Square-edged Orifice Plate Using Corner Tappings deals comprehensively with the subject of flow measurement through pipes by a square edge orifice plate using corner tappings. The object is to present in easily readable and applicable form a consideration of all the many factors involved in accurate measurement, thus enabling readers to appreciate what is involved in good flow metering practice, to design if desired their own installations to predetermined standards of accuracy, and to make reliable assessments of existing installations. The book is organized into four parts. Part 1 discusses basic principles, approved design and installation conditions, and recommended follow-up maintenance for various predetermined standards of accuracy, with special attention given to requirements concerned with the metered fluid, working conditions, orifice design, pipe layout and pipe conditions. Part 2 deals with the practical application of Part I and describes the method of using a Flowmeter Data Sheet specially designed both to ensure that the numerous factors involved in accurate flow measurements are taken into account. Part III consists of a number of representative and well-detailed specimen calculations designed to illustrate and clarify all aspects of the method of calculation advocated in Part II. In Part IV a considerable amount of relevant data on the physical properties of fluids, and many tables, graphs and alignment charts are assembled together for easy reference when making orifice calculations.

  • Adaptive Systems in Control and Signal Processing 1986

    Proceedings of the 2nd IFAC Workshop, Lund, Sweden, 1-3 July 1986
    • 1st Edition
    • K.J. Aström + 1 more
    • English
    This second IFAC workshop discusses the variety and applications of adaptive systems in control and signal processing. The various approaches to adaptive control systems are covered and their stability and adaptability analyzed. The volume also includes papers taken from two poster sessions to give a concise and comprehensive overview/treatment of this increasingly important field.

  • Chemical Resistance of Engineering Thermoplastics

    • 1st Edition
    • Erwin Baur + 2 more
    • English
    Chemical Resistance of Engineering Thermoplastics provides a comprehensive, cross-referenced compilation of chemical resistance data that explains the effect of thousands of reagents, the environment, and other exposure media on the properties and characteristics of engineering thermoplastics – plastics which are generally used in higher performance applications. A huge range of exposure media are included, from aircraft fuel to alcohol, corn syrup to hydrochloric acid, and salt to silver acetate. This information has been substantially updated, curated, and organized by the engineers at M-Base Engineering + Software, a leading supplier of material databases, material information systems, product information systems, and material related simulation software. This book is a must-have reference for engineers and scientists who are designing and working with plastics and elastomers in environments where they come into contact with corrosive or reactive substances, from food, pharmaceuticals, and medical devices to the automotive, aerospace, and semiconductor industries.

  • Frequency Analysis of Vibration Energy Harvesting Systems

    • 1st Edition
    • Xu Wang
    • English
    Frequency Analysis of Vibration Energy Harvesting Systems aims to present unique frequency response methods for analyzing and improving vibration energy harvesting systems. Vibration energy is usually converted into heat energy, which is transferred to and wasted in the environment. If this vibration energy can be converted into useful electric energy, both the performance and energy efficiency of machines, vehicles, and structures will be improved, and new opportunities will open up for powering electronic devices. To make use of ambient vibration energy, an effective analysis and design method is established and developed in this book. The book covers a wide range of frequency response analysis methods and includes details of a variety of real-life applications. MATLAB programming is introduced in the first two chapters and used in selected methods throughout the book. Using the methods studied, readers will learn how to analyze and optimize the efficiency of vibration energy systems. This book will be ideal for postgraduate students and researchers in mechanical and energy engineering.

  • Friction Dynamics

    Principles and Applications
    • 1st Edition
    • Xiandong Liu + 1 more
    • English
    Friction Dynamics: Principles and Applications introduces readers to the basic principles of friction dynamics, which are presented in a unified theoretical framework focusing on some of the most important engineering applications. The book's chapters introduce basic concepts and analytical methods of friction dynamics, followed by sections that explore the fundamental principles of frictions. Concluding chapters focus on engineering applications in brake dynamics, the friction dynamics of rods used in oil suck pump systems, and the friction impact dynamics of rotors. This book provides comprehensive topics and up-to-date results, also presenting a thorough account of important advancements in friction dynamics which offer insights into varied dynamic phenomena, helping readers effectively design and fabricate stable and durable friction systems and components for various engineering and scientific friction dynamical systems.

  • 4G, LTE-Advanced Pro and The Road to 5G

    • 3rd Edition
    • Erik Dahlman + 2 more
    • English
    The upcoming 5G specifications from 3GPP, to be available in 2018, will include LTE-Advanced Pro as well as a new 5G radio-access technology. This practical and very successful book, written by engineers working closely with 3GPP, gives insight into the newest technologies and standards adopted by 3GPP, with detailed explanations of the specific solutions chosen and their implementation in LTE, LTE-Advanced, and LTE-Advanced Pro, as well as providing a detailed description of the path to 5G and the associated underlying technologies. This edition has been thoroughly revised and updated to reflect the large extensions to LTE as introduced in 3GPP Releases 12 and 13 and the role of LTE in the upcoming 5G era. New to this edition includes updated content on: 4G and 5G Radio Access Spectrum for 4G and 5G Machine-Type Communication Device-to-Device Communication License-assisted Access Full-dimension MIMO Small-cell enhancements, eIMTA, FDD+TDD aggregation, dual connectivity Requirements on and general structure of 5G wireless access, addressing the existing and new usage scenarios for 5G Technical solutions for the new 5G radio-access technology The authors of this book all work at Ericsson Research and have been deeply involved in 3G and 4G development and standardization. They are leading experts in the field and are today actively contributing to the standardization of 4G and 5G within 3GPP.

  • Audio Content Security

    Attack Analysis on Audio Watermarking
    • 1st Edition
    • Sogand Ghorbani + 1 more
    • English
    Audio Content Security: Attack Analysis on Audio Watermarking describes research using a common audio watermarking method for four different genres of music, also providing the results of many test attacks to determine the robustness of the watermarking in the face of those attacks. The results of this study can be used for further studies and to establish the need to have a particular way of audio watermarking for each particular group of songs, each with different characteristics. An additional aspect of this study tests and analyzes two parameters of audio host file and watermark on a specific evaluation method (PSNR) for audio watermarking.

  • Application of Thermo-Fluidic Measurement Techniques

    An Introduction
    • 1st Edition
    • Tongbeum Kim + 2 more
    • English
    Application of Thermo-Fluidic Measurement Techniques: An Introduction provides essential measurement techniques in heat transfer and aerodynamics. In addition to a brief, but physically elaborate description of the principles of each technique, multiple examples for each technique are included. These examples elaborate all the necessary details of (a) test setups, (b) calibration, (c) data acquisition procedure, and (d) data interpretation, with comments on the limitations of each technique and how to avoid mistakes that are based on the authors’ experience. The authors have different expertise in convection heat transfer and aerodynamics, and have collaborated on various research projects that employ a variety of experimental techniques. Each author has a different view and approach to individual experimental techniques, but these views complement each other, giving new users of each technique a rounded view. With the introduction of this valuable reference book, the reader can quickly learn both the overall and detailed aspects of each experimental technique and then apply them to their own work.

  • Airworthiness

    An Introduction to Aircraft Certification and Operations
    • 3rd Edition
    • Filippo De Florio
    • English
    Airworthiness: An Introduction to Aircraft Certification and Operations, Third Edition, once again proves to be a valuable, user-friendly reference guide for certification engineers engaged in professional training and practical work in regulatory agencies and aircraft engineering companies. The discussions reflect the recent changes in the EASA-FAA regulations and also include the concepts of flight safety and airworthiness; the ICAO and civil aviation authorities; airworthiness requirements; type certifications and the type-certification process; production of products, parts, and appliances; certifications of airworthiness; and rules for spaceworthiness. Since publication of the second edition, airworthiness regulation and certification around the world have gone through significant changes. For example, EASA structure has completely changed, FAA rules are no longer applicable, substantial changes have been made in the international airworthiness regulations and certification procedures, and unmanned aircraft have evolved technically and operationally. The changes in airworthiness regulations in the last five years have been striking, changing the way in which we look at airworthiness and certification processes around the world.

  • Integrated Lasers on Silicon

    • 1st Edition
    • Charles Cornet + 2 more
    • English
    Integrated Lasers on Silicon provides a comprehensive overview of the state-of-the-art use of lasers on silicon for photonic integration. The authors demonstrate the need for efficient laser sources on silicon, motivated by the development of on-board/on-chip optical interconnects and the different integration schemes available. The authors include detailed descriptions of Group IV-based lasers, followed by a presentation of the results obtained through the bonding approach (hybrid III-V lasers). The monolithic integration of III-V semiconductor lasers are explored, concluding with a discussion of the different kinds of cavity geometries benchmarked with respect to their potential integration on silicon in an industrial environment.

  • Learning-Based Adaptive Control

    An Extremum Seeking Approach – Theory and Applications
    • 1st Edition
    • Mouhacine Benosman
    • English
    Adaptive control has been one of the main problems studied in control theory. The subject is well understood, yet it has a very active research frontier. This book focuses on a specific subclass of adaptive control, namely, learning-based adaptive control. As systems evolve during time or are exposed to unstructured environments, it is expected that some of their characteristics may change. This book offers a new perspective about how to deal with these variations. By merging together Model-Free and Model-Based learning algorithms, the author demonstrates, using a number of mechatronic examples, how the learning process can be shortened and optimal control performance can be reached and maintained.

  • The Boundary Element Method for Engineers and Scientists

    Theory and Applications
    • 2nd Edition
    • John T. Katsikadelis
    • English
    The Boundary Element Method for Engineers and Scientists: Theory and Applications is a detailed introduction to the principles and use of boundary element method (BEM), enabling this versatile and powerful computational tool to be employed for engineering analysis and design. In this book, Dr. Katsikadelis presents the underlying principles and explains how the BEM equations are formed and numerically solved using only the mathematics and mechanics to which readers will have been exposed during undergraduate studies. All concepts are illustrated with worked examples and problems, helping to put theory into practice and to familiarize the reader with BEM programming through the use of code and programs listed in the book and also available in electronic form on the book’s companion website.

  • Nonlinear Control Systems Design 1992

    Selected papers from the 2nd IFAC Symposium, Bordeaux, France, 24 - 26 June 1992
    • 1st Edition
    • M. Fliess
    • English
    This volume represents most aspects of the rich and growing field of nonlinear control. These proceedings contain 78 papers, including six plenary lectures, striking a balance between theory and applications. Subjects covered include feedback stabilization, nonlinear and adaptive control of electromechanical systems, nonholonomic systems. Generalized state space systems, algebraic computing in nonlinear systems theory, decoupling, linearization and model-matching and robust control are also covered.

  • Pipeline Leak Detection Handbook

    • 1st Edition
    • Morgan Henrie + 2 more
    • English
    Pipeline Leak Detection Handbook is a concise, detailed, and inclusive leak detection best practices text and reference book. It begins with the basics of leak detection technologies that include leak detection systems, and information on pipeline leaks, their causes, and subsequent consequences. The book moves on to further explore system infrastructures, performance, human factors, installation, and integrity management, and is a must-have resource to help oil and gas professionals gain a comprehensive understanding of the identification, selection, design, testing, and implantation of a leak detection system.

  • Progress in Ceramic Science

    • 1st Edition
    • J. E. Burke
    • English
    Progress in Ceramic Science, Volume 4 is a collection of papers reviewing the electrical and magnetic properties of ceramics, the fabrication techniques, and the effects of radiation on glasses. The book discusses the radiation effects in quartz, silica, and glasses focusing on the following: 1) the basic Si-O network; 2) impurities substitutional for silicon; and 3) alkali and hydrogen as the prime sources for ""non-bridging oxygen"". The text then explains the process of pressure sintering of ceramics to achieve pressure bonding, microstructural control, composite fabrication, and enhanced densification. One paper also discusses the theory on the relationship between the magnetic properties of non-metallic transition metal oxides and crystal chemistry. The book evaluates the non-stoichiometric or flux, melt techniques that are used in growing high quality single crystals found in electronic devices. This topic includes the benefits of the techniques and an outline of the principles of flux growth. The electrical conduction mechanisms in oxides are then addressed, emphasizing the chemical approach through equations that are commonly found in chemistry. The book therefore addresses ionic conduction and mixed electrolytic and electronic conductors, and then reviews the fundamental equation that applies to all conduction processes. The book can prove valuable for chemists, glass-ceramics materials engineers, ceramics technologists, and researchers in allied physics subjects.

  • Progress in Aeronautical Sciences

    Volume 6
    • 1st Edition
    • D. Küchemann + 1 more
    • English
    Progress in Aeronautical Sciences, Volume 6 reviews advances in aeronautical sciences and considers a wide range of problems related to aerodynamics, including some classical problems of fluid motion and those affecting hypersonic aircraft. Topics covered range from equations of gas flow at low density; nonequilibrium expansion flows of dissociated oxygen and ionized argon around a corner; and the role of spatially growing waves in the theory of hydrodynamic stability. This volume is comprised of five chapters and begins with a discussion on flows of gases where the density of the gas is too low for equations of continuum gas dynamics to be applicable. The kinetic theory of gases is used to derive the equations governing such flows. The second chapter deals with the nature of shock waves in flows of electrically conducting gases subjected to magnetic fields. The third chapter is concerned with the theory of two-dimensional flows of dissociated oxygen or ionized argon expanding around a corner. The fourth chapter goes back to the classical problem of hydrodynamic stability and the possible mechanics underlying the transition from the laminar to a turbulent state of the flow. The last chapter describes a future type of aircraft that can fly at hypersonic speeds. This book will be a useful resource for students and practitioners in the field of aeronautics.

  • Research in Electric Power

    The Commonwealth and International Library: Applied Electricity and Electronics Division
    • 1st Edition
    • Philip Sporn
    • P. Hammond
    • English

  • Electronic Devices and Circuits

    The Commonwealth and International Library: Electrical Engineering Division, Volume 1
    • 1st Edition
    • G. J. Pridham
    • N. Hiller
    • English
    Electronic Devices and Circuits, Volume 1 presents the extensive development of semiconductor devices. This book examines some of the electronic instruments in general use, with emphasis on the cathode ray oscilloscope as the basic instrument for the design and investigation of any circuit. Comprised of nine chapters, this volume begins with an overview of operation of inductive, resistive, and capacitive elements in d.c. and a.c. circuits. This text then explains the construction and limitations of the passive components used in electronic circuits. Other chapters consider the relation of charged particles to an atomic structure of elements and their movement under the action of magnetic and electric fields. This book discusses as well the characteristics and construction of some of the diodes in common use. The final chapter deals with the use of two and three element devices in rectifying circuits. This book is a valuable resource for aspiring professional and technician engineers in the electronics industry.

  • Progress in Aeronautical Sciences

    Volume 5
    • 1st Edition
    • D. Küchemann + 1 more
    • English
    Progress in Aeronautical Sciences, Volume 5, contains six articles that belong to the field of aerodynamics. This accords well with one of the declared purposes of this series, to serve the general reader with accounts of those parts of the subject remote from his specialized interest, not only because his field of specialization is likely to change during his career but also because we are all students of one science. The first paper gives a comprehensive survey of low-speed wind-tunnels, those early tools of the aerodynamicist which seem likely to retain their importance indefinitely. The second deals with a basic feature of the separation of a laminar boundary layer from a wall in two-dimensional flow: the bubble. The third reports on the more theoretical aspects of the IUTAM Symposium Transsonicum, which afforded a reunion of almost everyone who at one time or another had contributed to our knowledge of flows of mixed type. The fourth paper is concerned with a particular aspect of the theory of transonic flows and gives an exhaustive survey of this work. The fifth paper reports on a symposium devoted to rarefied gas dynamics. The final paper presents corrections to an article on the theory of sonic bangs, published in Volume 1 of this series.

  • Progress in Aeronautical Sciences

    Volume 8
    • 1st Edition
    • D. Küchemann + 2 more
    • English
    Progress in Aeronautical Sciences, Volume 8 is a collection of papers that covers the widening field of aeronautical sciences. The first article deals with problems in fluid mechanics and practical aerodynamics. This paper includes reducing problems to integral equations; the comparison of calculated results with exact analytic solutions; and with experimental pressure distributions using various configurations. The book follows this discussion with a review of the methods for designing swept-winged aircraft, including the design of a symmetrical-fuselage combination at zero incidence. The text also reviews the propulsion characteristics of a hypothetical aircraft flying at hypersonic speeds, and then focuses on air-breathing engines to power hypersonic aircrafts of which the scramjet is the most promising. The publication renders a comprehensive report on the viscous flow in boundary layers in ducts under rarefied conditions. The book then reviews investigations made on the viscous flow through tubes, both in continuum flow and in free-molecule flow. Another paper develops the fundamental mathematical and physical bases of magnetohydrodynamic flow through ducts in the presence of an applied electromagnetic field. Such review is useful when applied to electromagnetic flowmeters, pumps, or generators. The volume can be helpful for aerodynamic researchers, aviation technologists and designers, and aeronautical engineers.

  • Newnes Electronics Circuits Pocket Book (Linear IC)

    • 1st Edition
    • Volume 1
    • R M MARSTON
    • English
    Newnes Linear IC Pocket Book is aimed directly at those engineers, technicians, students and competent experimenters who can build a design directly from a circuit diagram, and if necessary modify it to suit individual needs. Dealing with strictly linear ICs each chapter deals with a specific type or class covering both basic principles and presenting a wide spectrum of applications, circuits and tables.

  • Industrial Chemical Process Analysis and Design

    • 1st Edition
    • Mariano Martín Martín
    • English
    Industrial Chemical Process Analysis and Design uses chemical engineering principles to explain the transformation of basic raw materials into major chemical products. The book discusses traditional processes to create products like nitric acid, sulphuric acid, ammonia, and methanol, as well as more novel products like bioethanol and biodiesel. Historical perspectives show how current chemical processes have developed over years or even decades to improve their yields, from the discovery of the chemical reaction or physico-chemical principle to the industrial process needed to yield commercial quantities. Starting with an introduction to process design, optimization, and safety, Martin then provides stand-alone chapters—in a case study fashion—for commercially important chemical production processes. Computational software tools like MATLAB®, Excel, and Chemcad are used throughout to aid process analysis.

  • Can Theatre Teach?

    An Historical and Evaluative Analysis of Theatre in Education
    • 1st Edition
    • Christine Redington
    • English

  • Classical and Modern Control with Worked Examples

    International Series on Systems and Control, Volume 2
    • 1st Edition
    • Jean-Pierre Elloy + 1 more
    • English

  • Lean Combustion

    Technology and Control
    • 2nd Edition
    • Derek Dunn-Rankin + 1 more
    • English
    Lean Combustion: Technology and Control, Second Edition outlines and explains the latest advances in lean combustion technology and systems. Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions. The book offers readers both the fundamentals and latest developments in how lean burn (broadly defined) can increase fuel economy and decrease emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion. Readers will learn about advances in the understanding of ultra-lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion (such as slow, difficult ignition and frequent flame extinction). This book offers abundant references and examples of real-world applications. New to this edition are significantly revised chapters on IC engines and stability/oscillatio... and new case studies and examples. Written by a team of experts, this contributed reference book aims to teach its reader to maximize efficiency and minimize both economic and environmental costs.

  • Newnes Electronics Assembly Handbook

    • 1st Edition
    • Keith Brindley
    • English

  • Analog Circuit Design

    Art, Science, and Personalities
    • 1st Edition
    • Jim Williams
    • English

Related subjects