Civil and structural engineering print books and ebooks | Elsevier

Offshore Safety Management

1st Edition
October 11, 2011
Ian Sutton
English
eBook
9 7 8 1 4 3 7 7 3 5 2 5 3

2010 was a defining year for the offshore oil and gas industry in the United States. On April 20, 2010, the Deepwater Horizon (DWH) floating drilling rig suffered a catastrophic explosion and fire. Eleven men died in the explosion — 17 others were injured. The fire, which burned for a day and a half, eventually sent the entire rig to the bottom of the sea. The extent of the spill was enormous, and the environmental damage is still being evaluated. Following DWH the Bureau of Ocean Energy Management, Regulations and Enforcement (BOEMRE) issued many new regulations. One of them is the Safety and Environmental System (SEMS) rule, which is based on the American Petroleum Institute’s SEMP recommended practice. Companies have to be in full compliance with its extensive requirements by November 15, 2011.

Applied Welding Engineering

1st Edition
September 30, 2011
Ramesh Singh
English

While there are several books on market that are designed to serve a company’s daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book’s four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author’s objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author’s own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternationa... NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc....

Construction Calculations Manual

1st Edition
September 19, 2011
Sidney M Levy
English
eBook
9 7 8 0 1 2 3 8 2 2 4 4 4

Construction Calculations is a manual that provides end users with a comprehensive guide for many of the formulas, mathematical vectors and conversion factors that are commonly encountered during the design and construction stages of a construction project. It offers readers detailed calculations, applications and examples needed in site work, cost estimation, piping and pipefitting, and project management. The book also serves as a refresher course for some of the formulas and concepts of geometry and trigonometry. The book is divided into sections that present the common components of construction. The first section of the books starts with a refresher discussion of unit and systems measurement; its origin and evolution; the standards of length, mass and capacity; terminology and tables; and notes of metric, U.S, and British units of measurements. The following concepts are presented and discussed throughout the book: Conversion tables and formulas, including the Metric Conversion Law and conversion factors for builders and design professionals Calculations and formulas of geometry, trigonometry and physics in construction Rudiments of excavation, classification, use of material, measurement and payment Soil classification and morphology, including its physicochemical properties Formulas and calculations needed for soil tests and evaluations and for the design of retaining structures Calculations relating to concrete and masonry Calculations of the size/weight of structural steel and other metals Mechanical properties of wood and processing of wood products Calculations relating to sound and thermal transmission Interior finishes, plumbing and HVAC calculations Electrical formulas and calculations Construction managers and engineers, architects, contractors, and beginners in engineering, architecture, and construction will find this practical guide useful for managing all aspects of construction.

Seepage Hydraulics

1st Edition
Volume 10
August 19, 2011
G. Kovács
English
eBook
9 7 8 0 0 8 0 8 7 0 0 1 4

Groundwater Hydraulics

1st Edition
Volume 7
August 19, 2011
V. Hálek + 1 more
English
eBook
9 7 8 0 0 8 0 8 6 9 9 8 8

Concrete Portable Handbook

1st Edition
July 21, 2011
R. Dodge Woodson
English
Paperback
9 7 8 0 1 2 3 8 2 1 7 6 8
eBook
9 7 8 0 1 2 3 8 2 1 7 7 5

Whether or not, you are on the job site or back in the office, this book will help you to avoid mistakes, code violations, and wasted time and money. The book’s four part treatment begins with constituent materials followed by self contained parts on Concrete Properties, Processes, and Concrete Repair and Rehabilitation. Designed to be an "all in one" reference, the author includes a wealth information for the most popular types of testing. This includes: Analysis of Fresh Concrete; Testing Machines; Accelerated Testing Methods; Analysis of Hardened Concrete and Mortar; Core Sampling and Testing; Assessment of Concrete Construction ; Repair; Quality Concepts; Quality Control; Statistics; Standards, Specifications, and Codes of Practice. With this book in hand, construction engineers and even technicians find valuable information regarding Exposed Concrete Finishes, Repairing Concrete, Formwork, Precast Concrete, Concrete Roads, and Industrial Floors. Project managers and owners will find this reference a valuable guide to concrete both in terms of its applications in construction projects and the science and chemistry of concrete for its own sake.

Engineering Rock Mass Classification

1st Edition
July 5, 2011
R K Goel + 1 more
English
Paperback
9 7 8 0 1 2 8 1 0 3 6 4 7
eBook
9 7 8 0 1 2 3 8 5 8 7 9 5

Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design.

Experiment and Calculation of Reinforced Concrete at Elevated Temperatures

1st Edition
May 20, 2011
Zhenhai Guo
English
Hardback
9 7 8 0 1 2 3 8 6 9 6 2 3
eBook
9 7 8 0 1 2 3 8 6 9 6 3 0

Concrete as a construction material goes through both physical and chemical changes under extreme elevated temperatures. As one of the most widely used building materials, it is important that both engineers and architects are able to understand and predict its behavior in under extreme heat conditions. Brief and readable, this book provides the tools and techniques to properly analysis the effects of high temperature of reinforced concrete which will lead to more stable, safer structures. Based on years of the author’s research, Reinforced Concrete at Elevated Temperatures four part treatment starts with an unambiguous and thorough exposition of the mechanical behaviors of materials at elevated temperature followed by a discussion of Temperature field of member sections, Mechanical behaviors of members and structures at elevated temperature, ending with Theoretical analysis and practical calculation methods. The book provides unique insight into: Coupling thermal-mechanical constitutive relation of concrete Exceptional analyses of beams and columns of rectangular section with three surfaces and two adjacent surfaces exposing to high temperature Measurement and analysis of redistribution of internal forces of statically indeterminate structure during heating-loading process Finite element analysis and calculation charts for two-dimensional temperature field of structural members Finite element analysis and simplified calculation method for reinforced concrete structure at elevated temperature With this book, engineers and architects can effectively analyze the effect of high temperature on concrete and materials which will lead to better designs of fire resistant and damage evaluation and treatment after fire.

Building Decorative Materials

1st Edition
May 9, 2011
Yan Li + 1 more
English
Paperback
9 7 8 0 0 8 1 0 1 7 3 5 7
eBook
9 7 8 0 8 5 7 0 9 2 5 8 8

Buildings should not only be functional but aesthetically pleasing. This requires the use of decorative materials both on the exterior and inside a building. Building decorative materials reviews the range of materials available and their potential applications.The book begins by considering the main types of decorative material and the physical, mechanical and other properties they require. It then discusses types and potential uses of decorative stone materials such as marble, granite, slate or gypsum. It then goes on to discuss the ways cement and concrete can be used for decorative effect, before considering the role of ceramics in such areas as tiling. The following chapters review decorative glass for windows or facades, metals and wood before assessing polymer materials such as plastics and textiles. The final group of chapters discuss coatings, including waterproofing materials, multi-functional materials used for such purposes as soundproofing and thermal insulation, and the use of more sustainable decorative materials.Building decorative materials is a useful reference for architects, civil engineers and those studying civil or structural engineering.

Building Materials in Civil Engineering

1st Edition
May 9, 2011
Haimei Zhang
English
Paperback
9 7 8 0 0 8 1 0 1 7 0 4 3
eBook
9 7 8 1 8 4 5 6 9 9 5 6 7

The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector.

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health

Books in Civil and structural engineering