Skip to main content
View Cart

Books in Chemical engineering

The Chemical Engineering collection offers content that combines research with foundational knowledge, practical information, methods and case studies, in a variety of areas, including biochemical engineering, catalysis, filtration & separation, colloids & surface chemistry, electrochemical engineering, energy & transport processes, materials chemistry, metallurgy, process engineering, safety & reliability, sustainable & environmental, to help chemical engineers address the challenges we face today, including climate change, global warming, health and nutrition, and alternative energy.

  • Collection of Simulated XRD Powder Patterns for Zeolites Fifth (5th) Revised Edition

    • 5th Edition
    • M.M.J. Treacy + 1 more
    • English
    This 5th edition of the Zeolite Powder Pattern Collection contains calculated patterns of 218 zeolite materials representing 174 framework topologies. The almost exponential growth of new zeolite topologies reflects the continued success of zeolite synthesis researchers in producing novel materials. Collection of Simulated XRD Powder Patterns for Zeolites includes materials of interest to zeolite scientists following the policies established at recent IZA conferences. The materials included have corner-sharing tetrahedral frameworks with no restrictions on chemical composition.

  • Chemical Engineering

    A New Perspective
    • 1st Edition
    • Kohei Ogawa
    • English
    Chemical engineering has often been referred to as a study in methodology. Approaches in chemical engineering are determined by individual phenomena/processes, and each of these are studied individually. The phenomena that are treated in chemical engineering can be classified into two groups:(1) phenomena that are definite and can be expressed by formulas such as differential equations (2) phenomena that can be expressed only by probability terms. The focus of Chemical Engineering - A new Perspective is on "information entropy". The main themes covered are mixing, separation, turbulent structure, particle size distribution and degree of uncertainty. The book recognizes that the information entropy may not be the only viewpoint, and how the degree of information entropy is useful for the other phenomena.

  • Catalysts for Upgrading Heavy Petroleum Feeds

    • 1st Edition
    • Volume 169
    • Edward Furimsky
    • English
    The book provides the most up-to-date information on testing and development of hydroprocessing catalysts with the aim to improve performance of the conventional and modified catalysts as well as to develop novel catalytic formulations. Besides diverse chemical composition, special attention is devoted to pore size and pore volume distribution of the catalysts. Properties of the catalysts are discussed in terms of their suitability for upgrading heavy feeds. For this purpose atmospheric residue was chosen as the base for defining other heavy feeds which comprise vacuum gas oil, deasphalted oil and vacuum residues in addition to topped heavy crude and bitumen. Attention is paid to deactivation with the aim to extent catalyst life during the operation. Into consideration is taken the loss of activity due to fouling, metal deposition, coke formed as the result of chemical reaction and poisoning by nitrogen bases. Mathematical models were reviewed focussing on those which can simulate performance of the commercial operations. Configurations of hydroprocessing reactors were compared in terms of their capability to upgrade various heavy feeds providing that a suitable catalyst was selected. Strategies for regeneration, utilization and disposal of spent hydroprocesing catalysts were evaluated. Potential of the non-conventional hydroprocessing involving soluble/dispersed catalysts and biocatalysts in comparison with conventional methods were assessed to identify issues which prevent commercial utilization of the former. A separate chapter is devoted to catalytic dewaxing because the structure of dewaxing catalysts is rather different than that of hydroprocessing catalysts, i.e., the objective of catalytic dewaxing is different than that of the conventional hydroprocessing, The relevant information in the scientific literature is complemented with the Patent literature covering the development of catalysts and novel reactor configurations.Separ... chapter was added to distinguish upgrading capabilities of the residues catalytic cracking processes from those employing hydroprocessing. Upper limits on the content of carbon residue and metals in the feeds which can still be upgraded by the former processes differ markedly from those in the feeds which can be upgraded by hydroprocessing. It is necessary that the costs of modifications of catalytic cracking processes to accommodate heavier feeds are compared with that of hydroprocessing methods.Objective of the short chapter on upgrading by carbon rejecting processes was to identify limits of contaminants in heavy feeds beyond which catalytic upgrading via hydroprocessing becomes uneconomical because of the costs of catalyst inventory and that of reactors and equipment.

  • Fluid Catalytic Cracking VII:

    Materials, Methods and Process Innovations
    • 1st Edition
    • Volume 166
    • English
    Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006.Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and metal contaminated oils cracking.Of particular interest has been the introduction of novel concept in process design aimed at improving cracked product selectivity such as two-stage risers for better gasoline and olefins production and downer technology for high severity processes . The importance of solid state nuclear magnetic resonance (NMR) in the study of crude oils, catalysts and reaction products are illustrated by several examples. Two contributions describe the use of predictive methods to understand FCC aging and deactivationand personal overviews of the development of SOx and combustion promoters technology are presented.

  • Centrifugal Separations in Biotechnology

    • 1st Edition
    • Wallace Woon-Fong Leung
    • English
    This book is the first devoted to centrifugal separation in biotechnology. It is of value toprofessionals in the chemical, bioprocess, and biotech sectors, and all those concerned with bioseparation, bioprocessing, unit-operations and process engineering.Key topics covered include a full introduction to centrifugation, sedimentation and separation; detailed coverage of centrifuge types, including batch and semi-batch centrifuges, disk-stack and tubular decanter centrifuges; methods for increasing solids concentration; laboratory and pilot testing of centrifuges; selection and sizing centrifuges; scale-up of equipment, performance prediction and analysis of test results using numerical simulation.

  • Advances in Chemical Engineering

    • 1st Edition
    • Volume 32
    • Guy B. Marin
    • English
    Understanding and modeling the kinetics of chemical reactions is crucial to any research and development effort aimed at process optimization and innovation. This volume of Advances in Chemical Engineering provides four complementary points of view. It reflects state-of-the-art developments as well as views on the way to proceed by reporting on the efforts of a representative, sample of research and development groups. A first contribution by W.H. Green Jr. sets the scene. The author advocates a paradigm shift in chemical kinetics from "postdictive" to predictive models. The contribution from the Politecnico di Milano reports on the tremendous experience accumulated over the years in the field of steam cracking, one of the largest scale production processes of the petrochemical industry. The Russian school of chemical kinetics is represented by a chapter on oxidation of alkanes, this contribution addresses more "philosophical" issues. The last chapter gives an indication of the state-of-the-art in an industrial environment.

  • Corrosion in Refineries

    • 1st Edition
    • Volume 42
    • J Harston
    • English
    Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems.With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry.

  • Standardisation of Thermal Cycling Exposure Testing

    • 1st Edition
    • Volume 53
    • M Schütze + 1 more
    • English
    The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion. There has long been a need for an agreed code of practice with standardised methods and procedures to ensure both the comparability and reliability of the results obtained. Based on an EU project, ‘Cyclic oxidation testing – development of a code of practice for the characterisation of high temperature materials performance’ (COTEST), this volume provides the essential background to an appropriate code of practice.The first part of the book reviews the range of existing test procedures. Part two summarises research on the influence of various test parameters on thermal cycling oxidation behaviour, including both long dwell and short dwell thermal cycling oxidation. The third and final part of the book describes the resulting code of practice which is being considered by the ISO/TC 156 Working Group 13 responsible for an appropriate international standard.With its distinguished editor and team of contributors, this important book is a standard reference for all those conducting thermal cycling oxidation testing or assessing its implications in such sectors as the power industry.

  • Ion Exchange Membranes

    Fundamentals and Applications
    • 1st Edition
    • Volume 12
    • Yoshinobu Tanaka
    • English
    Fundamental study and industrial application of ion exchange membranes started over half a century ago. Through the ongoing research and development, the ion exchange membrane technology is now applied to many fields and contributes to the improvement of our standard of living. Ion Exchange Membranes states the ion exchange membrane technology from the standpoint of fundamentals and applications. Discussing not only various phenomena exhibited by the membranes but also their applications in many fields with economical evaluations.

  • Corrosion Issues in Light Water Reactors

    Stress Corrosion Cracking
    • 1st Edition
    • Volume 51
    • D Féron + 1 more
    • English
    Stress corrosion cracking is a major problem in light water nuclear reactors, whether pressurised water reactors (PWRs) or boiling water reactors (BWRs). The nuclear industry needs to be able to predict the service life of these power plants and develop appropriate maintenance and repair practices to ensure safe long term operation. This important book sums up key recent research on corrosion in light water reactors and its practical applications.The book is divided into four parts. It begins with an overview of materials degradation due to stress corrosion, corrosion potential monitoring and passivation. Part two summarises research on susceptibility of materials to stress corrosion cracking and the ways it can be initiated. The third part of the book considers stress corrosion crack propagation processes whilst the final part includes practical case studies of corrosion in particular plants. The book reviews corrosion in a range of materials such as low alloy steels, stainless steels and nickel-based alloys.With its distinguished editor and team of contributors, Corrosion issues in light water reactors is a standard work for the nuclear industry.

Related subjects