Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
- ISSN: 0266-1144
Geotextiles and Geomembranes
An official Journal of the International Geosynthetics SocietyGeotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect or drain. As the use of geotextile fabrics has expanded there has been the introduction of geotextile composites and the development of products such as geogrids and meshes. Overall these materials are referred to as geotextiles and related products. All have a wide range of applications and are currently used to advantage in many civil engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection and coastal engineering.Geomembr... are impermeable membranes used widely as cut-offs and liners. Until recent years, geomembranes were used mostly as canal and pond liners; however, one of the largest current applications is to the containment of hazardous or municipal wastes and their leachates. In many of these applications geomembranes are employed with geotextile or mesh underliners which reinforce or protect the more flexible geomembrane whilst also acting as an escape route for gases and leachates generated in certain wastes.The range of products and their applications has expanded rapidly over the last decade with geotextiles and geomembranes being specified world wide. This rapid growth is paralleled by a virtual explosion of technology. Current reference books and even manufacturers' sponsored publications tend to date very quickly and the need for a vehicle to bring together and discuss the growing body of technology now available has become evident.Geotextiles and Geomembranes fills this need and provides a forum for the dissemination of information amongst research workers, designers, users and manufacturers. By providing a growing fund of information the journal increases general awareness, prompts further research and assists in the establishment of international codes and regulations.Types of Contribution: Refereed technical papers covering research, design, construction, applications and case studies; technical notes, professional practice papers, book reviews, reports of conferences and meetings, and letters to the Editor. All technical papers are open to written discussion. No limit to length is set and short notes are acceptable. Review articles may also be published at intervals, but the subject and contents of these should be discussed first with the Editor.
- ISSN: 1350-4495
Infrared Physics & Technology
The Journal covers the entire field of infrared physics and technology: theory, experiment, application, devices and instrumentation. Infrared' is defined as covering the near, mid and far infrared (terahertz) regions from 0.75um (750nm) to 1mm (300GHz.) Submissions in the 300GHz to 100GHz region may be accepted at the editors discretion if their content is relevant to shorter wavelengths. The very near infrared, VNIR, defined as 750nm-1200nm is subject to special consideration.Where a submission utilises the VNIR alone, or in conjunction with longer wavelengths and uses typically `infrared? technology such as InGaAs detectors, it is in scope.Where a submission utilises the VNIR and shorter wavelengths in the visible, and uses typically visible region technology such as silicon detectors, it is unlikely to be appropriate to this Journal. Submissions must be primarily concerned with and directly relevant to this spectral region. Its core topics can be summarized as the generation, propagation and detection, of infrared radiation; the associated optics, materials and devices; and its use in all fields of science, industry, engineering and medicine.Infrared techniques occur in many different fields, notably spectroscopy and interferometry; material characterization and processing; atmospheric physics, astronomy and space research. Scientific aspects include lasers, quantum optics, quantum electronics, image processing and semiconductor physics. Some important applications are medical diagnostics and treatment, industrial inspection and environmental monitoring.A fuller though not exhaustive list of topics would include: Astronomy, Astrophysics and Space ResearchAtmospheric transmission, turbulence and scatteringBiomedical and Medical applicationsCultural heritageEnvironmenta... applications: pollution and monitoringDetectors: quantum and thermalImage processingIndustrial applicationsInfrared lasers including free electron lasersMaterial properties, processing and characterizationNon-... testing, active and passive.• Optical elements: lenses, polarizers, filters, mirrors, fibres, etc.Radiometry: techniques, calibration, standards and instrumentationRemot... sensing and range-findingSolid-s... physicsThermal imaging: device design, testing and applicationsSynchrot... radiation in the infraredDuring submission, please suggest at least one and a maximum of five potential reviewers. You are strongly encouraged to submit recommendations for appropriately senior and knowledgeable referees having no connection to your work and not located at your institution, as this may speed up the processing of your manuscript. The editorial office may not use your suggestions, but they are greatly appreciated. Where the author works in a country with a small community of research workers in his or her field, it is highly desirable that at least two of the suggested referees are from another country.To be suitable for submission to this Journal, manuscripts should advance the field of Infrared Physics and Technology. Their target audience should be those working in the field of Infrared Physics and Technology. Papers using infrared methods, such as FTIR spectroscopy or thermography, in an essentially routine way to advance some other field, and of interest to other readerships, and generally not suited to this Journal.The Journal does include within its scope genuinely new applications of established infrared methods. In the field of medical applications such as the detection of breast cancer or diabetic pathology, submissions to IRPT should normally include advances in hardware or data collection protocols etc. Such studies are required to have adequate sized and well characterized cohorts. Clinical studies using standard equipment are generally not within the scope of the Journal. Similarly in the fields of hyperspectral imaging and near infrared (NIR) spectroscopy application of standard hardware and signal processing methods to a different agricultural product etc does not normally fall within our scope, whereas novel hardware or signal processing does.The Journal only publishes papers which are purely based on computer modelling without support from experimental results in exceptional circumstances when there is a clear reason to do so. These might, for example, include comparative studies of designs for large pieces of equipment such as satellites, FELs etc.Papers on advances in modelling techniques, appropriately validated, are welcome.
- ISSN: 1434-4610
Protist
Protist is the international forum for reporting substantial and novel findings in any area of research on protists. The criteria for acceptance of manuscripts are scientific excellence, significance, and interest for a broad readership. Suitable subject areas include: molecular, cell and developmental biology, biochemistry, systematics and phylogeny, and ecology of protists. Both autotrophic and heterotrophic protists as well as parasites are covered. The journal publishes original papers, review/mini-review articles and short historical perspectives.Protist was formerly known as Archiv fur Protistenkunde.
- ISSN: 0892-6875
Minerals Engineering
Minerals Engineering is an international journal devoted to innovation and developments in mineral processing and extractive metallurgy. The journal aims to provide for the rapid publication of topical papers featuring the latest developments in the allied fields of mineral processing and extractive metallurgy. Minerals Engineering welcomes outstanding contributions focused on research and practical (operating) topics including but not limited to:Geometallurgy and process mineralogy Ore pretreatment and comminutionPhysical separation methods, such as sorting, gravity, magnetic, electrostatic separation, dewateringFlotation (including mineral surface chemistry, reagents, bubble-particle interactions, cell hydrodynamics)Chemic... methods, such as pyro-, bio-, hydro-, and electro-metallurgyEq... design and optimisation in mineral processingModelling, simulation and process control in mineral processingMachine learning, artificial intelligence and digital twins in mineral processingAnalytical techniques in mineral processingApplicatio... of physical and chemical methods in mineral processing for mineral/metal recyclingEnvironment... and industrial mineral materialsEnvironment... issues, such as process water management, mine tailings treatment and disposalThe journal publishes a series of Special Issues linked to MEI Conferences (https://www.min-eng...
- ISSN: 0958-9465
Cement and Concrete Composites
Cement and Concrete Composites is designed to reflect current developments and advances being made in the general field of cement-concrete composites technology and in the production, use, and performance of cement-based construction materials. The word cement is interpreted in a wide sense, including not only Portland cement but also blended cements and other binding materials. In addition to novel aspects of conventional concrete materials, the journal covers a wide range of composite materials such as fiber-reinforced cement composites, polymer cement composites, polymer impregnated composites, ferrocement, and cement composites containing special aggregate inclusions or waste materials. Original papers dealing with microstructure (as it relates to engineering properties), material properties, testing and test methods, fracture mechanics, durability aspects, composite mechanics/technology... modelling, design, fabrication and practical applications of these materials form the major themes of the journal. Provided there is sufficient linkage to properties defined at the material scale, papers concerning the behavior of structural components and systems, in situ performance, and field studies will also be accepted for review, as well as those concerning the repair and maintenance, serviceability behavior, and sustainability of structures made with these materials.The journal has within the above context several specific objectives. It wants to foster a better understanding of construction materials, provide a forum for unusual and unconventional materials, encourage the development of low cost energy saving materials and bridge the gap between materials science, engineering performance, environmental effects, in situ behavior, design/service life and construction. It is the intention of the journal to also publish special issues devoted to topics of current or emerging interest. The journal aims to provide a unifying basis for collaboration between materials scientists, engineers, designers and fabricators.
- ISSN: 0141-9382
Displays
Displays is a peer reviewed international journal accepting technical, original research papers and tutorial papers dealing with display technologies and applications. The journal welcomes submissions in a wide range of display-related topics, including display technologies, materials, components, methods and systems, display-human interaction, processing and analysis of visual signals, and visual perception. The journal aims to provide a platform for the publication of top quality display-related research works with both academic and industrial appeal.Our dedicated editorial team will try their best to ensure a rapid reviewing process. The journal covers topics include, but not limited to, the following fields:Display-human Interaction• Visual signal processing and computer vision (CV) • Display-human/user interface design and analysis • Image/video quality assessment (IQA/VQA) and quality of experience (QoE) • Visual performance measurement and assessment • Visual perception and its cortical representation • Human factors and ergonomics for displaysDisplay Technology• Emissive/non-emissiv... displays • Flexible displays and E-papers • Materials/components and drive-electronics for displays • 3D displays and virtual/augmented/mi... reality (VR/AR/MR) • Auditory and tactile displays • Computational displaysBenefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0167-6393
Speech Communication
A publication of the European Association for Signal Processing (EURASIP) and of the International Speech Communication Association (ISCA)Speech Communication is a publication of the European Association for Signal Processing (EURASIP), which can be located at http://www.eurasip.o... and the International Speech Communication Association (ISCA), which can be located at http://www.isca-spee... Communication is an interdisciplinary journal whose primary objective is to fulfil the need for the rapid dissemination and thorough discussion of basic and applied research results. In order to establish frameworks to inter-relate results from the various areas of the field, emphasis will be placed on viewpoints and topics of a transdisciplinary nature. The editorial policy and the technical content of the Journal are the responsibility of the Editors and the Institutional Representatives. The Institutional Representatives assist the Editors in the definition and the control of editorial policy as well as in maintaining connections with scientific associations, international congresses and regional events. The Editorial Board contributes towards the gathering of material for publication and assists the Editors in the editorial process.Editorial Policy: The journal's primary objectives are: • to present a forum for the advancement of human and human-machine speech communication science; • to stimulate cross-fertilization between different fields of this domain; • to contribute towards the rapid and wide diffusion of scientifically sound contributions in this domain.Subject Coverage: Subject areas covered in this journal include: • Basics of oral communication and dialogue: modelling of production and perception processes; phonetics and phonology; syntax; semantics and pragmatics of speech communication; cognitive aspects. • Models and tools for language learning: functional organisation and developmental models of human language capabilities; acquisition and rehabilitation of spoken language; speech & hearing defects and aids. • Speech signal processing: analysis, coding, transmission, enhancement, robustness to noise. • Models for automatic speech communication: speech recognition; language identification; speaker recognition; speech synthesis; oral dialogue. • Development and evaluation tools: monolingual and multilingual databases; assessment methodologies; specialised hardware and software packages; field experiments; market development. • Multimodal human computer interface: using speech I/O in combination with other modalities, e.g., gesture and handwriting. • Forensic speech science: forensic voice comparison; forensic analysis of disputed utterances; speaker identification by earwitnesses.
- ISSN: 0926-5805
Automation in Construction
Design & Engineering — Construction Technology — Maintenance & ManagementAutomation in Construction is an international journal for the publication of original research papers. The journal publishes refereed material on all aspects pertaining to the use of Information Technologies in Design, Engineering, Construction Technologies, and Maintenance and Management of Constructed Facilities. The scope of Automation in Construction is broad, encompassing all stages of the construction life cycle from initial planning and design, through construction of the facility, its operation and maintenance, to the eventual dismantling and recycling of buildings and engineering structures. The following list of topics is not intended to be exhaustive, but rather to indicate topics that fall within the journal's purview:• Computer-aided design, product modeling, decision support systems, classification and standardization, product data interchange • Computer-aided engineering, process simulation models, graphics • Robotics, metrology, logistics, automated inspection, demolition/remediati... • Facilities management, management information systems, intelligent control systems.This journal is supported by the following organisations: - Education in Computer Aided Architectural Design in Europe (eCAADe) - International Association for Automation and Robotics in Construction (IAARC) - International Council for Research and Innovation in Building and Construction (C.I.B.)
- ISSN: 1063-5203
Applied and Computational Harmonic Analysis
Applied and Computational Harmonic Analysis (ACHA) is an interdisciplinary journal that publishes high-quality papers in all areas of mathematical sciences related to the applied and computational aspects of harmonic analysis, with special emphasis on innovative theoretical development, methods, and algorithms, for information processing, manipulation, understanding, and so forth. The objectives of the journal are to chronicle the important publications in the rapidly growing field of data representation and analysis, to stimulate research in relevant interdisciplinary areas, and to provide a common link among mathematical, physical, and life scientists, as well as engineers. Applied and computational harmonic analysis covers, in the broadest sense, topics that include but not limited to:I Signal and Function Representations • continuous and discrete wavelet transform • wavelet frames • wavelet algorithms •local time-frequency and time-scale basis functions • multi-scale and multi-level methods • refinable functionsII Representation of Abstract and High-dimensional Objects • diffusion wavelets and geometry • harmonic analysis on graphs and trees • sparse data representation • compressive sampling • compressed sensing • matrix completion • random matrices and projections • data dimensionality reduction • high-dimensional integrationIII Application Areas • data compression • signal and image processing • learning theory and algorithms • computer-aided geometric design • extra large data analysis and understanding • data recovery and image inpainting • data mining • hyperspectral imaging • novel sensors and systemsThis journal has an Open Archive. All published items, including research articles, have unrestricted access and will remain permanently free to read and download 48 months after publication. All papers in the Archive are subject to Elsevier's user license.
- ISSN: 0142-727X
International Journal of Heat and Fluid Flow
The International Journal of Heat and Fluid Flow publishes high impact research exploring the underlying physics or fundamental mechanisms governing fluid dynamic processes or/and heat transfer processes. The Journal seeks to publish novel contributions presenting original experimental or simulation results, developments in modelling or data-driven methods with an emphasis on describing novel insights into phenomena or unique features in fluid flow or/and heat transfer. Thematically related papers contributing to advances to engineering design and applications are welcome. The Journal encourages high-quality original contributions to transdisciplinary applications, including low-carbon/green power conversion system; thermo-acoustic interactions; micro/nano-scale thermos-fluidics; biological and environmental flows; flow-induced vibrations; and thermal and/or flow control.