Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
- ISSN: 2468-8231
Molecular Catalysis
Molecular Catalysis publishes full papers that are original, rigorous, and scholarly contributions examining the molecular and atomic aspects of catalytic activation and reaction mechanisms. The fields covered are:Heterogeneous catalysis including immobilized molecular catalystsHomogeneous catalysis including organocatalysis, organometallic catalysis and biocatalysisPhoto- and electrochemistryTheo... aspects of catalysis analyzed by computational methodsManuscripts submitted to Molecular Catalysis ideally fall into the field of chemical synthesis, i.e. the preparation of chemical compounds used as pharmaceutical building blocks, fine chemicals, commodity chemicals or as bulk chemicals (or as precursors for them).Manuscripts dealing with non-synthetic topics such as degradation reactions (e.g. photocatalysis for the degradation of dyes/pollutants), (bio)sensors or fuel cells will not be considered for publication in Molecular Catalysis.Contributi... that do not fall within the above aims and scope will be rejected at the editorial level. Examples are papers that are limited to:Routine preparation and characterization of catalytic materialsRoutine synthetic organic applications of catalysisRoutine computational studies that merely reproduces experimental dataSince the scopes of the Elsevier journals Molecular Catalysis, Applied Catalysis A: General, Applied Catalysis B: Environmental, and Catalysis Communications are complementary, an appropriate submission to each journal could be borderline, in which case the advice of another Editor will be sought, possibly redirecting the submission to either Applied Catalysis A: General, Applied Catalysis B: Environmental, or Catalysis Communications (for letters) with the author(s)'s agreement.Molecular Catalysis publishes regularly full papers; special issues on well-defined topics are published only by invitation. However, proposal from authors are welcome anytime and enquiries regarding the submission of special issues should be directed to the Editors. Any special issue should contain at least 30 articles featuring work from leading experts in the area and/or from leading institutes.Review and Perspective articles are normally published by invitation.Perspecti... are short articles covering current areas of interest for molecular catalysis audience in the form of personal accounts. The length of a published perspective ranges from 1500 to 2000 words (excluding figures, structures, photographs, schemes, tables, etc.) with at least 20 or more references.A new article format called "Ongoing Story" will focus on a still open molecular catalysis research showing the developments in the understanding by a specialist area. The length of a published "Ongoing story" ranges from 500 to 1000 words (excluding figures, structures, photographs, schemes, tables, etc.).Guidelines for catalyst characterization and reporting experimental results:Every manuscript published in Molecular Catalysis has to provide sufficient experimental detail to reproduce the experiments and calculations reported. Also, the identity of the products (especially if a new product is synthesized) has to be established together with the yield and its purity.Catalyst characterization: To establish the identity of new catalysts a precise synthesis and purification procedure is inevitable as well as sufficient spectroscopic (e.g. UV-Vis, NMR etc.), crystallographic and chromatographic identification (ideally placed into the supporting information).In case of enzyme catalysts, a detailed description and documentation (e.g. SDS-gels etc) of the enzyme preparation (such as expression system, induction, fermentation conditions, downstream processing and enzyme purification) has to be provided.Catalyst activity assays have to be described in detail (including reagents, assay conditions and activity calculations).Reacti... conditions: A detailed description of the reaction conditions comprises: solvent composition (if appropriate buffer strength, pH etc.), reaction temperature, pressure, shaking- or stirring etc. Whereas possible, the concentrations of all reagents must be given in molar concentrations. This applies in particular to time courses shown in the manuscript. Authors should refrain from showing %-conversions but rather show molar concentrations of products and starting materials. To evaluate the efficiency of a catalyst, turnover numbers and turnover frequencies (together with the conditions and equations for their calculation) should be included in the manuscript text.Statements on efficiency and/or environmental benignity: In general, authors should refrain from claims of 'efficiency' and/or environmental benignity ('greenness') unless these claims are substantiated by a quantitative comparison with a method of the state-of-the-art. Manuscripts using such terms excessively without quantitative justification will not be considered for publication.Plagiari... All manuscripts submitted to Molecular Catalysis are routinely screened with respect to originality of concept, content, and writing. It is not appropriate for an author to reuse wording from publicly available sources (including the authors' own publications) no matter if cited (or not). Manuscripts with a plagiarism level (similarity index) above 10%, including self-plagiarism will be automatically rejected at Editorial level.
- ISSN: 0927-7765
Colloids and Surfaces B: Biointerfaces
An International Journal Devoted to Fundamental and Applied Research on Colloid and Interfacial Phenomena in Relation to Systems of Biological OriginColloids and Surfaces B: Biointerfaces is an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin, having particular relevance to the medical, pharmaceutical, biotechnological, food and cosmetic fields.Submissions that: (1) deal solely with biological phenomena and do not describe the physico-chemical or colloid-chemical background and/or mechanism of the phenomena, and (2) deal solely with colloid/interfacial phenomena and do not have appropriate biological content or relevance, are outside the scope of the journal and will not be considered for publication.The journal publishes regular research papers, reviews, short communications and invited perspective articles, called BioInterface Perspectives. The BioInterface Perspective provide researchers the opportunity to review their own work, as well as provide insight into the work of others that inspired and influenced the author. Regular articles should have a maximum total length of 6,000 words. In addition, a (combined) maximum of 8 normal-sized figures and/or tables is allowed (so for instance 3 tables and 5 figures). For multiple-panel figures each set of two panels equates to one figure. Short communications should not exceed half of the above. It is required to give on the article cover page a short statistical summary of the article listing the total number of words and tables/figures.
- ISSN: 0167-739X
Future Generation Computer Systems
The International Journal of eScienceComputing infrastructures and systems are rapidly developing and so are novel ways to map, control and execute scientific applications which become more and more complex and collaborative. Computational and storage capabilities, databases, sensors, and people need true collaborative tools. Over the last years there has been a real explosion of new theory and technological progress supporting a better understanding of these wide-area, fully distributed sensing and computing systems. Big Data in all its guises require novel methods and infrastructures to register, analyze and distill meaning.FGCS aims to lead the way in advances in distributed systems, collaborative environments, high performance and high performance computing, Big Data on such infrastructures as grids, clouds and the Internet of Things (IoT).The Aims and Scope of FGCS cover new developments in:[1] Applications and application support:Novel applications for novel e-infrastructuresCom... workflow applicationsBig Data registration, processing and analysesProblem solving environments and virtual laboratoriesSemantic and knowledge based systemsCollaborative infrastructures and virtual organizationsMethods for high performance and high throughput computingUrgent computingScientific, industrial, social and educational implicationsEducatio... Methods and tools:Tools for infrastructure development and monitoringDistribute... dynamic resource management and schedulingInformatio... managementProtocols and emerging standardsMethods and tools for internet computingSecurity aspects[3] Theory:Process specification;Progra... and algorithm designTheoretical aspects of large scale communication and computationScaling and performance theoryProtocols and their verification
- ISSN: 1755-5817
CIRP Journal of Manufacturing Science and Technology
Published by CIRP, The International Academy for Production EngineeringThe CIRP Journal of Manufacturing Science and Technology (CIRP-JMST) publishes fundamental papers on manufacturing processes, production equipment and automation, product design, manufacturing systems and production organisations up to the level of the production networks, including all the related technical, human and economic factors. Preference is given to contributions describing research results whose feasibility has been demonstrated either in a laboratory or in the industrial praxis. CIRP Members and leading experts are equally encouraged to submit case studies and review papers on specific issues in manufacturing science and technology. The review papers need to be authored by the leading experts with well-established expertise in the field.A typical journal article is authored by the researcher and their supervisor. A paper can also be co-authored with another researcher or institution, but the number of authors typically does not exceed 4-5 people who directly contributed to the research. Others who indirectly contributed (e.g., through editing, conducting experiments, or providing funding) can be acknowledged, but should not be listed as authors.The Journal has been established by CIRP, The International Academy for Production Engineering to meet the needs above. In addition the CIRP has appointed an Editorial Board of Fellows of the Academy which forms a team of highly recognised international experts in the field.The intention is to establish a forum for publishing the best, most innovative research in the field and to this end the journal will publish both in-depth versions of the best papers from CIRP conferences, whilst at the same time, welcoming original contributions from authors worldwide. The main goal is to contribute to the further development of the Science and Technology of Manufacturing which is of fundamental importance for the future. list.
- ISSN: 2542-4351
Joule
What is Joule?Joule, a sister journal to Cell, is a home for outstanding and insightful research, analysis and ideas addressing a key global challenge: the need for more sustainable energy.Joule is a distinctive and forward-looking journal, bridging disciplines and scales of energy research. Joule connects all who are researching and analyzing the challenges - scientific, technical, economic, policy and social - of providing sustainable energy solutions.Joule spans scales of energy research, from fundamental laboratory research into energy conversion and storage up to impactful analysis at the global level.Joule will purposefully highlights and amplifies the implications, challenges and opportunities of novel energy research for different groups working across the entire spectrum of the field.Visit the Cell Press website for more information about Joule - http://www.cell.com/...
- ISSN: 0301-9322
International Journal of Multiphase Flow
The International Journal of Multiphase Flow publishes analytical, numerical and experimental articles of lasting interest. The scope of the journal includes all aspects of mass, momentum and energy exchange phenomena among different phases such as occur in disperse flows, gas–liquid and liquid–liquid flows, flows in porous media, boiling, granular flows and others.The journal publishes full papers, brief communications and conference announcements and Express Tracks.Express Track (ExTra) are papers that will be handled by a dedicated editor with a very short turnover time. The main goal of IJMF Express Track is to report significant developments in the field of multiphase flows that deserve to be published in a speedy manner. The first-round reviewing process is typically less than three weeks, and the average time from the submission to final online publication will be within two months. Manuscripts submitted to Express Tracks must maintain the same standard of rigor and quality required of all papers submitted to the Journal.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0019-0578
ISA Transactions
Published by the ISA, The International Society of Automation.ISA Transactions is a journal of advances and state-of-the-art in the science and engineering of measurement and automation, and is of value to leading-edge industrial practitioners and applied researchers.The topics of measurement include: sensors, perception systems, analyzers, signal processing, filtering, data compression, data rectification, fault detection, inferential measurement, soft sensors, hardware interfacing, etc.; and any of the techniques that support them such as artificial intelligence, fuzzy logic, communication systems, and process analysis. The topics of automation include: statistical and deterministic strategies for discrete event and continuous process control, modelling and simulation, event triggers, scheduling and sequencing, system reliability, quality, maintenance, management, loss prevention, etc.; and any equipment, techniques and best practices that support them such as optimization, learning systems, strategy development, security, and human interfacing and training.The intended audience is research and development personnel from academe and industry in the fields of control systems, process instrumentation, systems, and automation.The journal seeks to bridge the gap between theory and practice. This balance of interests requires simplicity of technique, credible demonstration, fundamental grounding, and connectivity to the state of the art in both theory and practice.For more details on The International Society of Automation (ISA), visit their home page.
- ISSN: 1871-174X
Palaeoworld
Published on behalf of the Nanjing Institute of Geology and Palaeontology, CASPalaeoworld is a peer-reviewed bimonthly journal dedicated to the study of past life and its environment. We encourage submission of original manuscripts on all aspects of palaeontology and stratigraphy, comparisons of regional and global data in time and space, and results generated by interdisciplinary investigations in related fields. Some issues will be devoted entirely to a special theme whereas others will be composed of contributed articles. Palaeoworld is dedicated to serving a broad spectrum of geoscientists and palaeobiologists as well as serving as a resource for students in fields as diverse as palaeobiology, evolutionary biology, taxonomy and phylogeny, geobiology, historical geology, and palaeoenvironment.Pa... publishes original articles in the following areas:•Phylogeny and taxonomic studies of all fossil groups •Biostratigraphy, chemostratigraphy, chronostratigraphy •Palaeoecology, palaeoenvironment and global changes throughout Earth history •Tempo and mode of biological evolution •Biological events in Earth history (e.g., extinctions, radiations) •Ecosystem evolution •Geobiology and molecular palaeobiology •Palaeontological and stratigraphic methods •Interdisciplinary studies focusing on fossils and strataPalaeoworld accepts the following categories of contributions:Origin... technical research papers and case studies Short communications Review articles (normally invited) Palaeoworld PerspectivesCollecti... of articles on a special theme Letter to the Editors Book reviewsThis journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 13 (Climate Action).
- ISSN: 1364-0321
Renewable & Sustainable Energy Reviews
The mission of Renewable and Sustainable Energy Reviews is to communicate the most interesting and relevant critical thinking in renewable and sustainable energy in order to bring together the research community, the private sector and policy and decision makers. The aim of the journal is to share problems, solutions, novel ideas and technologies to support sustainable development, the transition to a low carbon future and achieve the emissions targets as established by the United Nations Framework Convention on Climate Change.Renewable and Sustainable Energy Reviews publishes review papers, new technology analyses with respect to existing literature and original research studies that have a significant review element, which may take the form of a critique, comparison, or analysis. A bibliographic literature review, as well as country specific reviews are not considered suitable.The journal considers articles on the following themes, provided the link to renewable and sustainable energy is clear and thoroughly examined:Energy resources - bioresources (e.g. biomass, waste), fossil fuels (including natural gas) related to sustainability of systems, geothermal, hydrogen, hydropower, marine and ocean energy, solar and windApplications - buildings, industry and transport including information communication systems related to the improvement of system performanceUtilizati... - batteries, conversion technologies, fuel cells, storage technologies, technical developments and technology scalingEnvironment - atmosphere, climate issues, meteorology, mitigation technologies (e.g. carbon capture and storage (CCS), carbon capture and utilization (CCU), and solar radiation management)Techno-so... aspects - health, industry, policy, regulatory, social (e.g. access, education, equality, equity)Systems - carbon accounting, energy-food-water nexus, energy modelling, life cycle assessment (LCA), nutrient-energy-wate... (NEW) nexus, smart infrastructureSustai... - the United Nations Sustainability Development Goals (SDGs)Ocean systems - ocean technology, ocean exploration, environmental protection of the oceans.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy) and SDG 13 (Climate Action)
- ISSN: 0162-0134
Journal of Inorganic Biochemistry
The emphasis of the Journal is on interdisciplinary research covering the structure and mechanism of action of metallobiomolecules primarily at the molecular level. The Journal reports on the chemistry, biochemistry and the structure-function relationships of the following systems:metalloprote... and metallochaperones in homeostasis and traffickingmetal-dep... gene regulation and signallinginteractio... of metal ions as well as coordination and organometallic compounds with nucleic acids, other biomolecules and reactive speciesmetal-contain... molecules in medicine, including therapeutics, imaging agents for diagnosis and theranosticsmetallon... and the role of metal ions in sensory perception regulatory role of metals in immunologysynthesis and application of metal ion sensors in biological systems natural and artificial metalloenzymessynthe... and properties of metal complexes as structural and functional models of metallobiositesprepa... structural characterization and mode of action of synthetic metallobionanomateri... mechanisms of toxicity of metals and metalloids and their complexes, and their chemistry in the environmentcomputati... studies of metallo-biomolecules and their synthetic modelsbiophysical, analytical and spectroscopic methods to study metallobiomolecules.... involving nanoparticles or metal-organic frameworks (MOFs) may be suitable for submission to the Journal of Inorganic Biochemistry only if such materials are specifically used to investigate the transport, sensing, or detection of metalloproteins or metallo-pharmaceutic... or as metallo-enzyme mimics. Manuscripts focused only on the properties of metal-based nanoparticles and/or their biological effects, without providing the molecular details of these effects, should be directed to journals specializing in materials or nanoscience. These guidelines ensure that submissions align with the journal’s emphasis on metal-biological interactions and biochemistry, maintaining a clear focus distinct from general nanoparticle and materials science research.