Journals in Energy and power
Journals in Energy and power
Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.
- ISSN: 0140-9883
Energy Economics
Energy Economics is the premier field journal for energy economics and energy finance. Themes include, but are not limited to, the exploitation, conversion and use of energy, markets for energy commodities and derivatives, regulation and taxation, forecasting, environment and climate, international trade, development, and monetary policy. Contributions to the journal can use a range of methods, if appropriately and rigorously applied, including but not limited to experiments, surveys, econometrics, decomposition, simulation models, equilibrium models, optimization models, and analytical models.Submitted papers must be replicable. Submitted papers are typically pre-reviewed by the editor-in-chief and the handling editor. Papers generally need two or more positive review reports to be invited for a revise-and-resubmit.... policy Energy Economics publishes an eclectic mix of papers using a wide variety of methods to shed light on a range of topics. Our replication policy reflects this, and is applied in spirit rather than to the letter. We encourage the submission of replication studies. Replication studies should reproduce the key results of the original study, replicate them and extend them in a substantive way, while explaining the differences.For econometric papers, authors should provide program(s) and data set(s), plus a readme file on how to replicate each table, graph and other result. Ideally, there will be one command to reproduce the entire paper. Use of interactive software is discouraged. The readme file should identify the software and toolboxes used. If data are proprietary, the readme file should make clear how data can be obtained. For experimental and survey-based papers, authors should provide the original instructions (plus an English translation if applicable), information about subject eligibility and selection, the raw data, and any program used to analyze the data. For analytic papers, authors should provide data and programs used for the simulations (if any). Detailed derivations and proofs should be placed in an appendix. For papers using simulation, equilibrium or optimization models, authors should provide data and programs. If data or programs are proprietary, unambiguous information on the version should be provided, plus information on how data or programs can be obtained. Small models developed in-house should be provided. For large models developed in-house, a standard version should be provided together with a detailed description of the changes made for the version used in the paper at hand. Data and programs can be provided either as an appendix to the paper or as a stable link to a website. Data files should be in machine-readable format.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center
- ISSN: 0167-9317
Microelectronic Engineering
Nanotechnology and Processing — Electronics, photonics, MEMS and Life Sciences Affiliated with iMNEsMicroelectronic Engineering is the premier journal focused on the fabrication and characterization of micro/nano-electroni... materials, devices and circuits (including novel electronic nanomaterials), as well as the understanding of their working mechanisms, performance, yield, variability, stability, and reliability. The journal also focuses on the techniques that make possible the fabrication and characterization of such devices and circuits, and on the materials involved in them. Occasionally, outstanding papers on simulation of materials properties, device figures-of-merit or compact modeling of circuits and systems may be accepted. The following topics are of special interest:DevicesPhot... and optoelectronic devices (including, sensors, actuators, phototransistors)Tra... (including ultra-scaled, thin film, organic, ferroelectric)Resist... switching devices (memristors, RRAM, PCRAM, FeRAM, MRAM)Magnetic and spintronic devicesMEMS and NEMS (including power, RF, magnetic, organic)Flexible electronic devices (including wearable, printed, paper)Devices for energy harvesting (piezoelectric, flexoelectric, photovoltaic, solar cells)Bioelectronic devices (molecular detection, biomimetic, diagnosis)Device-lev... simulations (including variability and reliability)Material... bandgap semiconductorsDielec... (low K and high K)Two-dimensional (2D) Materials and related transferring techniquesNanotubes, nanowires, and other nanomaterials and nanostrctures for device fabricationInterconn... metallization and barrier materialsNew Resist MaterialsSilicon on insulatorsPolymers and flexible substrates, including biocompatible materialsAtomistic simulations of materials propertiesFabricatio... and characterization processesThin films deposition techniques (CVD, ALD, evaporation, sputtering, MBE, plasma)Lithography (including optical, EUV, electron beam, nanoimpring, particle-assisted, mask less, X-ray optical methods, emerging methods and limits, as well as resists)Pattern transfer (including ion, plasma and wet transfer, as well as transfer of 2D materials)Integratio... processes (including inkjet printing, 3D printing, 3D integration)Top-down and bottom-up self-assembly processesAnnealing and its effect in the materials (including crystallization, wrinkling, de-wetting)Nanometro... (TEM, SEM, EDX, EELS, STM, AFM and related setups)Circuits and applicationsSensing and actuation, including bio-compatible applicationsSignal souring and transferLogic operations and data processingElectronic memories and information storageArtificial neural networks and neuromorphic computingCompact modeling of electronic circuitsQuantum computingFive different types of articles are considered:Research articles that report regular original research that produces significant advancement.Accelera... Publications (Letters) that feature exciting research breakthroughs.Review Articles that inform readers of the latest research and advances in a topic within the broad field of microelectronic engineering. This includes roadmaps and guides proposing the recommended methods in a specific field.Short / Technical notes intended for original limited investigations or short description of original industrial or industrially-related research and development workNews and Opinions that comment on topical issues or express views on the developments in related fields, or comment on previously published work
- ISSN: 0029-8018
Ocean Engineering
Last updated June 2025Ocean Engineering aims to provide a medium for the publication of original research and development work in the field of ocean engineering.The journal seeks papers in the following topics:Ocean Engineering including: fixed and floating offshore platforms; pipelines and risers; cables and mooring; buoy technology; foundation engineering; ocean mining; marine and offshore renewable energy; aquaculture engineering; environmental protection; subsea engineering.Naval Architecture including: ship and special marine vehicle design; intact and damaged stability; technology for energy efficiency and green shipping; ship production technology; decommissioning and recycling.Polar and Arctic Engineering including: ice mechanics; ice-structure interaction; polar operations; polar design; environmental protection.Automatic Control of Marine Systems including: automatic control; automation and autonomy for marine vehicles and systemsUnderwater Technology including: AUV/ROV design; AUV/ROV hydrodynamics; maneuvering and control; underwater-specific communicating and sensing systems for AUV/ROVs.In these fields, papers on the following technical topics are welcome.Hydro- and Aerodynamics: CFD; vortex induced vibrations; fluid-structure interaction; hydroelasticity; linear and non-linear wave mechanics; buoyancy and stability; ship resistance and propulsion; seakeeping and controls; ship maneuvering; ship-radiated noise; wind-assisted propulsion; energy-efficient devices; hydroacoustics; aeroacoustics from offshore wind turbines.Structural Mechanics: materials; limit state prediction and assessments; fatigue; fracture; structural health monitoring; collision and crash worthiness, degradation; ship strength.Stochastic Calculations: stochastic processes; safety and reliability; risk and limit state design.Experimental Approaches: instrumentation; full-scale measurements; model tests.Marine equipment: risers; pipelines; ballast water treatment; air emissions treatment; underwater noise mitigation; and associated components or equipment.Ocean Environmental Predictions: only for the impact of extreme event predictions; extreme statistics; wave groups; tsunamis; short-term environment predictions and impact of climate change on ocean structures and vessel operation and design. Note that manuscripts related to broader physical oceanography or ocean science topics such as climate variability, climate modelling, remote sensing, and oceanic data analysis should be submitted to journals specialising in climate and oceanographic sciences.Automatic Control of Marine Systems: Papers submitted in this subject area should have genuine value in naval architecture and maritime engineering and should include the validation of results preferably, by full-scale measurements or model-scale tests or, when this is not possible, by high-fidelity simulations. Methods used in papers should be validated in conditions that represent realistic marine environments. Research on civilian applications of underwater imaging, target detection, acoustic target recognition and image enhancement techniques related to marine automation is also within the scope.Human Factors and Maritime Safety including: Maritime accidents; fatigue management; risk assessment; situational awareness; maritime training; human errors; human performance in operation; human factors in maritime accidents; safety culture; human factors taxonomy; all related to maritime engineering.Out of scope topics last updated December 2024Ocean Engineering does not accept submissions on marine engines and auxiliary systems, heating and cooling systems, pumps, valves, underwater explosions, sediment transport, sediment disturbance and erosion, chloride penetration, dam break phenomena, or purely theoretical papers without any application to ocean engineering. Broad material science and corrosion studies without a focus on naval architecture or offshore engineering are also outside the journal's scope. Furthermore, the journal does not consider studies related to wind turbines unless there is a direct application to offshore engineering (such as offshore wind turbines). Research focusing on the mechanics of robotic devices or wireless power transfer systems also falls outside the journal’s scope.Additionally, Ocean Engineering does not accept submissions focusing solely on military applications. While the journal is currently open to papers on submarine hydrodynamics, it must be ensured that no sensitive or military-related content is included. The aim of any manuscript submitted to Ocean Engineering should be the worldwide dissemination of scientific knowledge, focusing on civilian applications that advance the broader field of ocean and maritime engineering.*Authors are requested to complete a Review Proposal Form for Editorial approval prior to submission of the review article. Proposals can be submitted to [email protected] or one of the Editors.
- ISSN: 0301-4215
Energy Policy
The International Journal of the Political, Economic, Planning, Environmental and Social Aspects of EnergyEnergy Policy is an international peer-reviewed journal addressing the policy implications of energy supply and use from their economic, social, planning and environmental aspects. Papers may cover global, regional, national, or even local topics that are of wider policy significance, and of interest to international agencies, governments, public and private sector entities, local communities and non-governmental organisations. Within this broad spectrum, topics of particular interest include energy and environmental regulation, energy supply security, the quality and efficiency of energy services, the effectiveness of market-based approaches and/or governmental interventions, technological innovation and diffusion, and voluntary initiatives where the broader policy implications can be recognised. Policy prescriptions are required to be supported by rigorous analysis and balanced appraisal.Given the aims and scope of Energy Policy, all submitted papers should explicitly address policy issues involving energy supply or use.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy).Special issue proposals Prospective guest editor(s) should submit written proposals that incorporate the rationale for the special issue topic, positions it in the literature, and include some illustrative topics and proposed contributors. Guest Editors should complete and submit this Special Issue Proposal template to be considered for publication in the Journal.
- ISSN: 0304-8853
Journal of Magnetism and Magnetic Materials
The Journal of Magnetism and Magnetic Materials provides an important forum for the disclosure and discussion of original contributions covering the whole spectrum of topics, from basic magnetism to the technology and applications of magnetic materials. The journal encourages greater interaction between the basic and applied sub-disciplines of magnetism with comprehensive review articles, in addition to full-length contributions. In addition, other categories of contributions are welcomed, including Critical Focused issues, Current Perspectives, and Outreach to the General Public.Main Categories: Full-length articles: Technically original research documents that report results of value to the communities that comprise the journal audience. The link between chemical, structural and microstructural properties on the one hand and magnetic properties on the other hand are encouraged.In addition to general topics covering all areas of magnetism and magnetic materials, the full-length articles also include three sub-sections, focusing on Nanomagnetism, Spintronics and Applications. The sub-section on Nanomagnetism contains articles on magnetic nanoparticles, nanowires, thin films, 2D materials and other nanoscale magnetic materials and their applications. The sub-section on Spintronics contains articles on magnetoresistance, magnetoimpedance, magneto-optical phenomena, Micro-Electro-Mechan... Systems (MEMS), and other topics related to spin current control and magneto-transport phenomena. The sub-section on Applications display papers that focus on applications of magnetic materials. The applications need to show a connection to magnetism.Review articles: Review articles organize, clarify, and summarize existing major works in the areas covered by the Journal and provide comprehensive citations to the full spectrum of relevant literature.Other Categories: Critical Focused Issues - consist of single articles on emerging topics of interest. Articles in this category identify problems of current interest that need to be addressed in the future in order to advance an emerging subfield of magnetism. By identifying such open issues, they focus the interest of the community to the challenges ahead. Thus, unlike review articles, this category will aim more on the future and what needs to be explored, rather than on what has been explored in the past. Of course, the articles include a review aspect in order to identify the open issues and put them into perspective. The articles need not be long, exhaustive or comprehensive. They provide the vision of the authors, who are recognized experts in the field. Readers utilize these articles to focus their thinking on future endeavors. These articles should also help to generate proposals to funding agencies worldwide. Current Perspectives - Current Perspectives consists of clusters of articles on emerging topics of interest. The articles have guest editors who formulate and manage the intellectual scope of the project. A cluster is composed of authors who represent their own perspective and who possess diverse opinions on facets of the topic. A cluster, in its totality, provides a balanced point of view, while each individual article is free to be discriminating. The articles within a cluster have invited status, the articles are typically of short-to-medium length, and the reference lists must be adequate but not necessarily extensive. The clusters are expected to focus not only on what is known, but also on what the open questions are that need to be addressed in the future. The articles should be written at a level that inspires the next generation of graduate students. The guest editors typically provide an overview article to tie the cluster together thematically. Outreach to the General Public - These are articles of a general nature that highlight the importance of magnetism and stimulate the interest of the public at large. A heightened awareness of magnetism is healthy for our field. Experts who have given public lectures will be encouraged to submit their work in order for them to reach a larger community. It will also help our readers in their own communications with the public. These articles need not be long, exhaustive or comprehensive. They provide the vision of the authors. Providing the public with the importance of magnetism and magnetic materials at a level that can be understood and appreciated will be a public service. It will also inspire a new generation of students, have a positive influence on science policy, and strengthen the case of our community in the eyes of funding agencies worldwide.Benefits to authorsPlease see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center.AUDIENCE. Condensed matter physicists, materials scientists, chemists, engineers, biologist and other interdisciplinary researchers.
- ISSN: 0927-0248
Solar Energy Materials and Solar Cells
An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy ConversionSolar Energy Materials & Solar Cells is intended as a vehicle for the dissemination of research results on materials science and technology related to photovoltaic, photothermal and photoelectrochemical solar energy conversion. Materials science is taken in the broadest possible sense and encompasses physics, chemistry, optics, materials fabrication and analysis for all types of materials.Of particular interest are: Solar Cells, covering single crystal, polycrystalline and amorphous materials utilising homojunctions and heterojunctions, Schottky barriers, liquid junctions and their applications. Also of interest is analysis of component materials, individual cells and complete systems, including their economic aspects. Photothermal Devices, in the broadest sense, including solar absorber devices, heat storage materials, radiative cooling systems and their applications. Photoelectrochemical and Photochemical Devices, covering photoelectrodes, photocatalysis, photoconversion and solar desalination systems and their applications. Optical Properties of materials, including light trapping, texturising, solar concentrators which include imaging and non-imaging optical collectors. Light Control, including systems for energy efficient architecture and daylighting, chromogenics and smart windows.The pertinent issues are comprehensive and encompass bulk materials, coatings and thin films and surface treatments, from basic as well as from applications-oriente... and manufacturing related perspectives.Manuscr... of general interest not being suitable for Solar Energy Materials and Solar Cells can be submitted to Refocus, which publishes magazine-style feature articles concerning all aspects of renewable energy. Please e-mail David Hopwood, Editor for further details (d.hopwood@elsevier.... and visit http://www.re-focus.... articles not specifically related to the materials aspects of Solar Energy conversion can be submitted to Solar Energy, the official journal of the International Solar Energy Society. For details, visit https://www.elsevier... journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)
- ISSN: 2352-152X
Journal of Energy Storage
The Journal of Energy Storage focusses on all aspects of energy storage, in particular systems integration, electric grid integration, modelling and analysis, novel energy storage technologies, sizing and management strategies, business models for operation of storage systems and energy storage developments worldwide.The journal offers a single, peer-reviewed, multi-disciplinary platform for scientists and engineers in academia, research institutions, government agencies and industry. The journal is also of interest to decision makers and technical, economic and policy advisers in these organisations.The Journal of Energy Storage welcomes original research papers, reviews and short communications. Topics include, but are not limited to the following:• Science, technology and applications of electrochemical, chemical, mechanical, electrical and thermal energy storage • Engineering, control, optimization, numerical and modelling aspects of energy storage systems • Demand and management of intermittency in large scale low-carbon power generation involving renewable energy sources using energy storage systems and other competing flexibility options such as flexible power plants, demand side management in households and industry, combined heat and power, or grid extensions • Applications, load profiles and requirements of storage technologies in grid-scale electrical storage, electric vehicle transportation, traction applications, off-grid systems, uninterruptible power supplies, and portable electronic applications • Management and control of large quantities of distributed storage systems as virtual large scale storage systems, including vehicle-to-grid, energy storage integrated with buildings, and multi-purpose and hybrid storage systems • Testing, test procedures, evaluation, lessons learned, life cycle costs, life cycle assessment, and safety of energy storage systems • Economic, policy and regulatory aspects, markets, market models, and market introduction concepts of energy storage systems.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)
- ISSN: 0893-6080
Neural Networks
Neural Networks provides a forum for developing and nurturing an international community of scholars and practitioners who are interested in all aspects of neural networks, including deep learning and related approaches to artificial intelligence and machine learning. Neural Networks welcomes submissions that contribute to the full range of neural networks research, from cognitive modeling and computational neuroscience, through deep learning algorithms and mathematical analyses, to engineering and technological applications of systems that significantly use neural network concepts and learning techniques. This uniquely broad range facilitates the cross-fertilization of ideas between biological and technological studies, and helps to foster the development of the interdisciplinary community that is interested in biologically-inspire... artificial intelligence. Accordingly, the Neural Networks editorial board represents experts in fields including psychology, neurobiology, computer science, engineering, mathematics, and physics. On the other hand, neural networks should be central to submissions. The journal publishes articles, letters, and reviews/tutorials, as well as letters to the editor, editorials, and current events. Articles are published in one of five sections: learning systems, cognitive science, neuroscience, mathematical and computational analysis, engineering and applications.Neural Networks is the archival journal of three of the oldest and most prominent neural network societies: the International Neural Network Society (INNS), the Asia-Pacific Neural Network Society (APNNS), and the Japanese Neural Network Society (JNNS). A subscription to the journal is included with membership in each of these societies.Members of the societies listed as affiliated to the journal receive a 25% discount on Article Processing Charges when they publish an article in Neural Networks as an author - this will be detailed through the submission and production processes.INNS members receive additional support with a further 25% contribution from the INNS towards their open access article processing charges for accepted papers. If you are an INNS member, please submit this web form to receive reimbursement for 25% of your open access article processing charges. You will be asked to submit a PDF copy of your acceptance and production email, as well as a Wire Transfer Form.
- ISSN: 0022-3115
Journal of Nuclear Materials
The Journal of Nuclear Materials publishes high quality papers in materials research for nuclear applications, primarily fission reactors, fusion reactors, and similar environments including radiation areas of charged particle accelerators. Both original research and critical review papers covering experimental, theoretical, and computational aspects of either fundamental or applied nature are welcome.Papers submitted to JNM should exhibit a high degree of novelty and contain a significant discussion section that analyzes and interprets the results with outcomes that advance our understanding and push the field forward. Incremental research papers are not acceptable.The breadth of the field is such that a wide range of processes and properties in the field of materials science and engineering is of interest to the readership, spanning atom-scale processes, microstructures, thermodynamics, mechanical properties, physical properties, and corrosion, for example.Topics covered by JNM Fission reactor materials, including fuels, cladding, core structures, pressure vessels, coolant interactions with materials, moderator and control components, fission product behavior.Materials aspects of the entire fuel cycle.Materials aspects of the actinides and their compounds.Performanc... of nuclear waste materials; materials aspects of the immobilization of wastes.Fusion reactor materials, including first walls, blankets, insulators and magnets.Neutron and charged particle radiation effects in materials, including defects, transmutations, microstructures, phase changes and macroscopic properties.Interacti... of plasmas, ion beams, electron beams and electromagnetic radiation with materials relevant to nuclear systems.Topics NOT covered by JNMTopics in nuclear engineering and other areas not addressing materials, such as:Particle transport, cross-sections, shielding or isotope ratios (Radiation Physics and Chemistry; Annals of Nuclear Energy, Applied Radiation and Isotopes)Process engineering (Materials Science and Engineering A; Materials and Design)Leaching or chemical kinetics studies in aqueous, salt or other media (Hydrometallurgy; Chemical Engineering Science)Thermal hydraulics or properties of fluids (Nuclear Engineering and Design)Uranium extraction, uranium ore processing, and isotope separation processes (Nuclear Engineering and Design; Progress in Nuclear Energy)Fission or fusion reactor design and technology (Nuclear Engineering and Design; Fusion Engineering & Design)Plasma physics (Physics Letters A)Materials topics not addressing nuclear applications, such as general studies in:Physical and chemical properties including modeling and simulation (Materials Science and Engineering A; Materials Letters)Metallurgy (Journal of Alloys and Compounds; Materials Science and Engineering A)Corrosion (Corrosion Science)Welding and joining (Journal of Alloys and Compounds; Materials and Design)Ceramics (Journal of the European Ceramics Society; Ceramics international)
- ISSN: 0960-8524
Bioresource Technology
Bioresource Technology publishes original articles, review articles, case studies and short communications on the fundamentals, applications and management of bioresource technology.The journal's aim is to advance and disseminate knowledge in all the related areas of biomass, biological waste treatment, bioenergy, biotransformations and bioresource systems analysis, and technologies associated with conversion or production.Topics include:• Biofuels: liquid and gaseous biofuels production, modeling and economics • Bioprocesses and bioproducts: biocatalysis and fermentations • Biomass and feedstocks utilization: bioconversion of agro-industrial residues • Environmental protection: biological waste treatment • Thermochemical conversion of biomass: combustion, pyrolysis, gasification, catalysisFor more details, authors should consult the Subject Classifications in the Guide for Authors.The journal does not consider articles dealing with crop cultivation, breeding and agronomy, plant extracts and enzymes, composites, marine organisms (except microorganisms and algae for bioprocesses), soil and air pollution, and performance of fuel combustion in engines. Bioresource Technology does not consider part papers. Submissions focusing on the fundamentals, applications and management of bioresource technology can be submitted to the online-only, rapid-publication journal Bioresource Technology Reports.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)