Books in Materials chemistry

Fatigue of Metallic Materials

2nd Edition
Volume 71
April 13, 1992
M. Klesnil + 1 more
English
Hardback
9 7 8 0 4 4 4 9 8 7 2 3 5

This book reviews problems in the mechanical behaviour of cyclically loaded metallic materials, primarily with regard to the nature of the fatigue process. The first edition of the book appeared in 1980. The present second edition represents a revised form of the original book and also covers recent developments in the field. As the book focuses on physical-metallurgic... aspects, it occupies a unique and important position in the technical literature, which has so far been devoted mainly to engineering metal fatigue problems and their technical solution in specific practical cases. The book provides a compact review of current knowledge on physical metallurgical processes that accompany and affect the fatigue of metallic materials, and also presents the background for applying the new results to practical designing and to the selection of materials in engineering practice. The authors present an updated review of results from countries both in the east and the west and cover a relatively large field in a concise manner. The work will be of value to research workers and students following advanced and post-graduate courses in the fields of materials science and mechanical engineering.

Handbook of Flotation Reagents: Chemistry, Theory and Practice

1st Edition
September 1, 1991
Srdjan M. Bulatovic
English
Paperback
9 7 8 1 4 9 3 3 0 2 4 1 3
eBook
9 7 8 0 0 8 0 9 3 2 0 9 5

Handbook of Flotation Reagents: Chemistry, Theory and Practice: Flotation of Gold, PGM and Oxide Minerals, Volume 2 focuses on the theory, practice, and chemistry of flotation of gold, platinum group minerals (PGMs), and the major oxide minerals, along with rare earths. It examines separation methods whose effectiveness is limited when using conventional treatment processes and considers commercial plant practices for most oxide minerals, such as pyrochlore-containin... ores, copper cobalt ores, zinc ores, tin ores, and tantalum/niobium ores. It discusses the geology and mineralogy of gold, PGMs, and oxide minerals, as well as reagent and flotation practices in beneficiation. The book also looks at the factors affecting the floatability of gold minerals and describes PGM-dominated deposits such as Morensky-type deposits, hydrothermal deposits, and placer deposits. In addition, case studies of flotation and beneficiation in countries such as Canada, Africa, Russia, Chile, and Saudi Arabia are presented. This book will be useful to researchers, university students, and professors, as well as mineral processors faced with the problem of beneficiation of difficult-to-treat ores.

Fundamentals of Welding Metallurgy

1st Edition
July 31, 1991
H. Granjon
English
Hardback
9 7 8 1 8 5 5 7 3 0 1 9 9

It is possible to weld materials as diverse as stainless steels, zirconium, titanium and uranium, but it is crucial to understand the chemical reactions likely in the surrounding welding atmosphere. This book describes all the metallurgical phenomena involved in different welding processes, from the most standard to the most modern, such as electron beam welding or high energy laser welding.

Metal Matrix Composites

1st Edition
Volume 15
July 24, 1991
G. Chadwick + 1 more
English
eBook
9 7 8 0 4 4 4 5 9 6 7 0 3

The 53 papers in this volume cover the topics of Metal Matrix Composites production routes, aspects of interfacial thermodynamics and kinetics, mechanical and physical properties, post-production processing, and applications. The contributions provide a valuable insight into the current trends in the use of metal matrix composites.

Sol-Gel Science

1st Edition
April 28, 1990
C. Jeffrey Brinker + 1 more
English
Hardback
9 7 8 0 1 2 1 3 4 9 7 0 7
eBook
9 7 8 0 0 8 0 5 7 1 0 3 4

Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing presents the physical and chemical principles of the sol-gel process. The book emphasizes the science behind sol-gel processing with a chapter devoted to applications. The first chapter introduces basic terminology, provides a brief historical sketch, and identifies some excellent texts for background reading. Chapters 2 and 3 discuss the mechanisms of hydrolysis and condensation for nonsilicate and silicate systems. Chapter 4 deals with stabilization and gelation of sols. Chapter 5 reviews theories of gelation and examines the predicted and observed changes in the properties of a sol in the vicinity of the gel point. Chapter 6 describes the changes in structure and properties that occur during aging of a gel in its pore liquor (or some other liquid). The discussion of drying is divided into two parts, with the theory concentrated in Chapter 7 and the phenomenology in Chapter 8. The structure of dried gels is explored in Chapter 9. Chapter 10 shows the possibility of using the gel as a substrate for chemical reactions or of modifying the bulk composition of the resulting ceramic by performing a surface reaction (such as nitridation) on the gel. Chapter 11 reviews the theory and practice of sintering, describing the mechanisms that govern densification of amorphous and crystalline materials, and showing the advantages of avoiding crystallization before sintering is complete. The properties of gel-derived and conventional ceramics are discussed in Chapter 12. The preparation of films is such an important aspect of sol-gel technology that the fundamentals of film formation are treated at length in Chapter 13. Films and other applications are briefly reviewed in Chapter 14. Materials scientists and researchers in the field of sol-gel processing will find the book invaluable.

Rapidly Quenched Metals 6

1st Edition
January 1, 1988
R.W. Cochrane
English
eBook
9 7 8 0 0 8 0 9 8 4 8 4 1

Rapidly Quenched Metals 6, Volume 1 covers the proceedings of the Sixth International Conference on Rapidly Quenched Metals held at Le Centre Sheraton, Montreal, Canada from August 3 to 7, 1987. The said conference discusses a wide variety of topics in the field of rapidly solidified metals. The book is divided into two parts. Part 1 covers topics that involve the formation and transformation in metallic materials; amorphous metals; the applications of mechanical alloying; and rapid melting and quenching. Part 2 discusses the formation and structure of amorphous alloys, which includes topics such as the metastability of amorphous phases; amorphous alloy powders; and studies about the properties of different amorphous alloys. The text is recommended for those involved in materials science and metallurgy, especially those studying rapidly solidified metals and amorphous alloys.

Related subjects

Carbon fullerenes and nanotubes

Diamond and related materials

Ferrous metals

Metallurgy

Metals and alloys

Metals processing

Physical metallurgy

Powder metallurgy

Solid state chemistry

Supramolecular science and biomimetics

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health