Skip to main content
Elsevier

Books in Metallurgy

  • Complete Casting Handbook

    Metal Casting Processes, Metallurgy, Techniques and Design
    • 3rd Edition
    • John Campbell
    • English
    Complete Casting Handbook: Metal Casting Processes, Metallurgy, Techniques and Design, Third Edition provides modern principles and processes in both breadth and depth while also retaining a clear, practical focus. The book has a unique viewpoint, interpreting the behavior of castings and metals as a whole, in terms of their biofilm content, the largely invisible casting defects which control much of the structure and behavior of metals. This new edition has been thoroughly revised, with updated sections on extended fluidity, additive manufacturing of molds, porosity as an entrainment defect, tensile properties and other failure aspects, metrology and much more. The third edition has also been updated to include two brand new chapters, one focused on avoidance of fracture through good casting, and the other on sustainability in the casting industry.

  • Treatise on Process Metallurgy

    Volume 2A: Process Phenomena
    • 2nd Edition
    • Seshadri Seetharaman + 4 more
    • English
    Treatise on Process Metallurgy: Volume Two, Process Phenomena provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more.The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board.

  • Treatise on Process Metallurgy

    Volume 4: Industrial Plant Design and Process Modeling
    • 2nd Edition
    • Alexander McLean + 4 more
    • English
    Treatise on Process Metallurgy: Volume Four, Industrial Production provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board.

  • Treatise on Process Metallurgy

    Volume 3: Industrial Processes
    • 2nd Edition
    • Seshadri Seetharaman + 4 more
    • English
    Treatise on Process Metallurgy: Volume Three, Industrial Processes provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board.

  • Treatise on Process Metallurgy

    Volume 1: Process Fundamentals
    • 2nd Edition
    • Seshadri Seetharaman + 4 more
    • English
    Treatise on Process Metallurgy: Volume One, Process Fundamentals provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board.

  • Mining and Processing Residues

    Future’s Source of Critical Raw Materials
    • 1st Edition
    • Olga Chernoburova + 1 more
    • English
    Mining and Processing Residues: Future’s Source of Critical Raw Materials provides a comprehensive review of principal aspects of CRM-containing residues re-processing, including available sampling and analytical techniques, the latest available processing technologies, authorization and legal matters, and analysis of environmental, social, and economic impacts. Suitable for academic researchers, practicing engineers and students, the book is aimed at giving a complete and multilateral view of CRM recovery from the residues.

  • Iron Ore

    Mineralogy, Processing and Environmental Sustainability
    • 2nd Edition
    • Liming Lu
    • English
    Iron Ore: Mineralogy, Processing and Environmental Sustainability, Second Edition covers all aspects surrounding the second most important commodity behind oil. As an essential input for the production of crude steel, iron ore feeds the world's largest trillion-dollar-a-ye... metal market and is the backbone of the global infrastructure. The book explores new ore types and the development of more efficient processes/technologi... to minimize environmental footprints. This new edition includes all new case studies and technologies, along with new chapters on the chemical analysis of iron ore, thermal and dry beneficiation of iron ore, and discussions of alternative iron making technologies. In addition, information on recycling solid wastes and P-bearing slag generated in steel mills, sustainable mining, and low emission iron making technologies from regional perspectives, particularly Europe and Japan, are included. This work will be a valuable resource for anyone involved in the iron ore industry.

  • Mechanical Alloying

    Energy Storage, Protective Coatings, and Medical Applications
    • 3rd Edition
    • M. Sherif El-Eskandarany
    • English
    Mechanical Alloying: Energy Storage, Protective Coatings, and Medical Applications, Third Edition is a detailed introduction to mechanical alloying that offers guidelines on the necessary equipment and facilities needed to carry out the process, also giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter is included on utilization of the mechanically alloyed powders for thermal spraying. Fully updated to cover recent developments in the field, this second edition also introduces new and emerging applications for mechanical alloying, including the fabrication of carbon nanotubes, surface protective coating and hydrogen storage technology. El-Eskandarany discusses the latest research into these applications and provides engineers and scientists with the information they need to implement these developments.

  • Blast Furnace Ironmaking

    Analysis, Control, and Optimization
    • 1st Edition
    • Ian Cameron + 3 more
    • English
    Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in Excel™. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the Excel™ model that the reader will develop. The first principles blast furnace Excel™ model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future.　

  • Waste Electrical and Electronic Equipment (WEEE) Handbook

    • 2nd Edition
    • Vannessa Goodship + 2 more
    • English
    Waste Electrical and Electronic Equipment (WEEE) Handbook, Second Edition, is a one-stop reference on current electronic waste legislation initiatives, their impact, and the latest technological considerations for reducing electronic waste (e-waste) and increasing the efficiency of materials recovery. It also provides a wide-range of global and corporate examples and perspectives on the challenges that face specific regions and companies, along with the solutions they are implementing in managing e-waste, offering further insights on how discarded products can be treated. Sections introduce the reader to legislation and initiatives to manage WEEE and discuss technologies for the refurbishment, treatment and recycling of waste electronics. Further sections focus on electronic products that present particular challenges for recyclers, explore sustainable design of electronics and supply chains, discuss national and regional WEEE management schemes, and more.

  • High-Entropy Alloys

    • 2nd Edition
    • B.S. Murty + 3 more
    • English
    High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications.

  • Hydrometallurgy

    • 1st Edition
    • Frank K. Crundwell
    • English
    Hydrometallurgy describes the aqueous chemistry, thermodynamics, kinetics, reactor design and engineering of extracting metals by hydrometallurgical routes. The book includes the techniques by which gold, copper, nickel, cobalt and the platinum-group metals are produced as highly-pure metals to meet the exact needs of the market. In addition, the book covers the scientific and engineering principles of these types of processes, the industrial practice used to produce such high-value metals, and the factors that make these processes so successful. Finally, the recovery of valuable metals through recycling of waste materials is discussed.

  • Hydrometallurgy of Rare Earths

    Extraction and Separation
    • 1st Edition
    • Dezhi Qi
    • English
    Hydrometallurgy of Rare Earths: Extraction and Separation provides the basic knowledge for rare earth extraction and separation, including flow sheet selection criteria and related technology. The book includes the latest research findings on all rare earth separation processes, methods of controlling operation costs, and strategies that help lower wastewater and waste solid discharge. It discusses many real process parameters and actual situations in rare earth separation plants, also examining the basic principles, technologies, process parameters and advances and achievements in the area of rare earth extraction and separation. In addition, the book covers extraction separation theory as developed by Professor Guanxian Xu and Professor Chunhua Yan and the creative use of a computational simulation program to replace the bench scale and pilot plant tests and directly design rare earth extraction separation processes.

  • Metallurgical Failure Analysis

    Techniques and Case Studies
    • 1st Edition
    • Kannadi Palankeezhe Balan
    • English
    Metallurgical Failure Analysis: Techniques and Case Studies explores how components fail and what measures should be taken to avoid future failures. The book introduces the subject of failure analysis; covers the fundamentals and methodology of failure analysis, including fracture and fractography of metals and alloys and the tools and techniques used in a failure investigation; examines 37 case studies on high performance engineering components; features experimental results comprised of visual-, fractographic-, or metallographic- examination, hardness measurements and chemical analysis; includes illustrations and evidence obtained through test results to enhance understanding; and suggests suitable remedial measures when possible. The various case studies are classified according to the major causes of failures. The case studies pertain to: Improper Material Selection, Manufacturing Defects, Casting Defects, Overload, Fatigue, Corrosion Induced Failures, Hydrogen Embrittlement and Stress Corrosion Cracking, Wear and Elevated Temperature Failures. The book contains information gathered over three decades of the author’s experience handling a variety of failure cases and will go a long way toward inspiring practicing failure analysts. The book is designed for scientists, metallurgists, engineers, quality control inspectors, professors and students alike.

  • High Temperature Phase Equilibria and Phase Diagrams

    • 1st Edition
    • Chu-Kun Kuo + 2 more
    • English
    High temperature phase equilibria studies play an increasingly important role in materials science and engineering. It is especially significant in the research into the properties of the material and the ways in which they can be improved. This is achieved by observing equilibrium and by examining the phase relationships at high temperature. The study of high temperature phase diagrams of nonmetallic systems began in the early 1900s when silica and mineral systems containing silica were focussed upon. Since then technical ceramics emerged and more emphasis has been placed on high temperature studies. This book covers many aspects, from the fundamentals of phase diagrams, experimental and computational methods, applications, to the results of research. It provides an excellent source of information for a range of scientists such as materials scientists, especially ceramicists, metallurgists, solid-state physicists and chemists, and mineralogists.

  • Metallurgy and Design of Alloys with Hierarchical Microstructures

    • 1st Edition
    • Krishnan K. Sankaran + 1 more
    • English
    Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstru... relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications.

  • Extraction, Refining, and Fabrication of Light Metals

    Proceedings of the International Symposium on Extraction, Refining and Fabrication of Light Metals, Ottawa, Ontario, August 18-21, 1991
    • 1st Edition
    • M. Sahoo + 1 more
    • English
    World-class scientists and engineers from more than six countries presented thirty-five papers on topics such as magnesium casting technology, metal matrix composites, mathematical modelling, solidification and reduction of light metals. Metal matrix composites are an important class of advanced industrial materials and significant advances have been achieved recently on the fabrication and characterization of their microstructures and mechanical properties.

  • Steels: Microstructure and Properties

    • 4th Edition
    • H.K.D.H. Bhadeshia + 1 more
    • English
    Steels: Structure and Properties, Fourth Edition is an essential text and reference, providing indispensable foundational content for researchers, metallurgists, and engineers in industry and academia. The book provides inspiring content for undergraduates, yet has a depth that makes it useful to researchers. Steels represent the most used metallic material, possessing a wide range of structures and properties. By examining the properties of steels in conjunction with structure, this book provides a valuable description of the development and behavior of these materials—the very foundation of their widespread use. The new edition has been thoroughly updated, with expanded content and improved organization, yet it retains its clear writing style, extensive bibliographies, and real-life examples.

  • Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy

    • 1st Edition
    • G. E. Ruddle + 1 more
    • English
    This volume contains 27 papers covering the advances being made in the field of accelerated cooling technology for hot-rolled steel products. Main topics covered include accelerated cooling applications to plate, strip, bars and shapes; system design; process modelling and effects on transformation; microstucture and mechanical properties, providing international steel industry R & D personnel and metallurgical research groups with a state-of-the-art update of this rapidly developing technology.

  • Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy

    Co-Sponsored by the Non-Ferrous Pyrometallurgy and Hydrometallurgy Sections of the Metallurgical Society of the CIM
    • 1st Edition
    • G. Kachaniwsky + 1 more
    • English
    The symposium brings together papers by industrial users of oxygen, major oxygen producers, engineering firms and leading experts in the field. It covers recent development in oxygen technology - both in application and technology. Both pyrometallurgical and hydrometallurgical applications are discussed, and O2 production technologies feature the cryogenic process together with several alternative novel methods. Established and new emerging processes are featured, and increased process efficiencies, higher throughputs and reduced energy consumption are among the objectives of the symposium.

  • Nucleation and Growth of Metals

    From Thin Films to Nanoparticles
    • 1st Edition
    • Paul-Henri Haumesser
    • English
    Nucleation and Growth of Metals: From Thin Films to Nanoparticles explores how nucleation and growth phenomena condition the morphology and related characteristics of metallic thin films and nanoparticles to help control the functional properties of these objects. The book brings a rigorous theoretical approach to nucleation and growth phenomena, with a particular focus on the essential aspects and outcomes of this theory. The author explores a general framework for the nucleation and growth of condensed phases from liquid solutions. Practical situations are extensively described, providing state-of-the art information on Cu electroplating and related processes for the fabrication of advanced interconnects and elaboration of metallic nanoparticles.

  • Theory and Methods of Metallurgical Process Integration

    • 1st Edition
    • Ruiyu Yin
    • English
    Theory and Methods of Metallurgical Process Integration analyzes the basic elements and characteristics of steel manufacturing processes and operation, also proposing a theory of precise dynamic design and integration of steel plants. Following several case studies, a new generation steel manufacturing process is proposed. Through deep description and analysis of the dynamic operation of the steel manufacturing process, this book can help readers understand that the study of dynamic integration for the "mass-energy-time-sp... during the steel manufacturing process has to be highly emphasized in order to further promote optimization of the steel manufacturing process and plant.

  • Engineering Equipment for Foundries

    Proceedings of the Seminar on Engineering Equipment for Foundries and Advanced Methods of Producing Such Equipment, Organized by the United Nations Economic Commission for Europe
    • 1st Edition
    • Sam Stuart
    • English
    Engineering Equipment for Foundries covers the proceedings of the Seminar on Engineering Equipment for Foundries and Advanced Methods of Producing such Equipment, held in Palais des Nations in Geneva, Switzerland on November 28-December 2, 1977. This seminar is organized by the United National Economic Commission for Europe. This book is organized into five parts encompassing 39 chapters. Part I focuses on the economic problems of the foundry industry, particularly in connection with reduction of labor requirements and in calculating foundry production capacity. Part II highlights the problem of environmental pollution created by different branches of metallurgy, while Part III deals with the general problems concerning practices and technological developments in the foundry industry. Part IV describes the technological advances in molding and coremaking processes in foundry. This part also discusses the reduction of waste energy in permanent mold and die-casting foundries. Part V considers the transition to process and production automation of foundry equipment. This book will prove useful to metallurgical engineers, manufacturers, and researchers.

  • Nickel & Cobalt Extraction Using Organic Compounds

    • 1st Edition
    • J. J. Jacobs + 3 more
    • English
    Provides a unique survey of the information contained in the patent literature concerning solvent extraction of nickel and cobalt. All the available data from the patent documentation is classified systematically for easy retrieval of authors, patents or assignees. Presented in three parts, the first deals with leaching of nickeliferous or cobaltiferous sources using organic reagents; the second reviews the solvent extraction of nickel or cobalt, or both from solutions; the third covers solvent extraction methods used to remove impurities from solutions containing nickel or cobalt. Cites over 300 patent documents.

  • Still the Iron Age

    Iron and Steel in the Modern World
    • 1st Edition
    • Vaclav Smil
    • English
    Although the last two generations have seen an enormous amount of attention paid to advances in electronics, the fact remains that high-income, high-energy societies could thrive without microchips, etc., but, by contrast, could not exist without steel. Because of the importance of this material to comtemporary civilization, a comprehensive resource is needed for metallurgists, non-metallurgists, and anyone with a background in environmental studies, industry, manufacturing, and history, seeking a broader understanding of the history of iron and steel and its current and future impact on society. Given its coverage of the history of iron and steel from its genesis to slow pre-industrial progress, revolutionary advances during the 19th century, magnification of 19th century advances during the past five generations, patterns of modern steel production, the ubiquitous uses of the material, potential substitutions, advances in relative dematerialization, and appraisal of steel’s possible futures, Still the Iron Age: Iron and Steel in the Modern World by world-renowned author Vaclav Smil meets that need.

  • High-Temperature Oxidation and Sulphidation Processes

    Proceedings of the International Symposium on High-Temperature Oxidation and Sulphidation Processes, Hamilton, Ontario, Canada, August 26-30, 1990
    • 1st Edition
    • J. D. Embury
    • English
    This book deals with the fundamental description of the thermodynamics and kinetics of high temperature oxidation of sulphidation of metals and intermetallic compounds. It is a comprehensive account of a large amount of new work in the field including modelling, analysis and a range of experimental methods. The text deals with both basic materials, and some current high temperature structural materials.

  • Complete Casting Handbook

    Metal Casting Processes, Metallurgy, Techniques and Design
    • 2nd Edition
    • John Campbell
    • English
    Campbell’s Complete Casting Handbook: Metal Casting Processes, Techniques and Design, Second Edition provides an update to the first single-volume guide to cover modern principles and processes in such breadth and depth, while also retaining a clear, practical focus. The work has a unique viewpoint, interpreting the behavior of castings, and metals as a whole, in terms of their biofilm content, the largely invisible casting defects which control much of the structure and behavior of metals. This new edition includes new findings, many from John Campbell’s own research, on crack initiation, contact pouring, vortex gates, and the Cosworth Process.

  • Iron Ore

    Mineralogy, Processing and Environmental Sustainability
    • 1st Edition
    • Liming Lu
    • English
    Iron Ore: Mineralogy, Processing and Environmental Issues summarizes recent, key research on the characterization of iron ores, including important topics such as beneficiation (separation and refining), agglomeration (e.g., production of pellets or powders), blast furnace technology for smelting, and environmental issues relating to its production. The text is an ideal reference on the topic during a time when iron ore production has increased significantly, driven by increasing demand from countries such as India and China.

  • Mechanical Alloying

    Nanotechnology, Materials Science and Powder Metallurgy
    • 2nd Edition
    • M. Sherif El-Eskandarany
    • English
    This book is a detailed introduction to mechanical alloying, offering guidelines on the necessary equipment and facilities needed to carry out the process and giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter will also be included on thermal, mechanically-induced and electrical discharge-assisted mechanical milling. Fully updated to cover recent developments in the field, this second edition also introduces new and emerging applications for mechanical alloying, including the fabrication of carbon nanotubes, surface protective coating and hydrogen storage technology. El-Eskandarany discusses the latest research into these applications, and provides engineers and scientists with the information they need to implement these developments. The industrial applications of nanocrystalline and metallic glassy powders are presented. The book also contains over 200 tables and graphs to illustrate the milling processes and present the properties and characteristics of the resulting materials.

  • Friction Stir Welding of Dissimilar Alloys and Materials

    • 1st Edition
    • Nilesh Kulkarni + 2 more
    • English
    This book will summarize research work carried out so far on dissimilar metallic material welding using friction stir welding (FSW). Joining of dissimilar alloys and materials are needed in many engineering systems and is considered quite challenging. Research in this area has shown significant benefit in terms of ease of processing, material mixing, and superior mechanical properties such as joint efficiencies. A summary of these results will be discussed along with potential guidelines for designers.

  • Fundamentals of Creep in Metals and Alloys

    • 3rd Edition
    • Michael E. Kassner
    • English
    Although the present edition of Fundamentals of Creep in Metals and Alloys remains broadly up to date for metals, there are a range of improvements and updates that are either desirable, or required, in order to ensure that the book continues to meet the needs of researchers and scholars in the general area of creep plasticity. Besides updating the areas currently covered in the second edition with recent advances, the third edition will broaden its scope beyond metals and alloys to include ceramics, covalent solids, minerals and polymers, thus addressing the fundamentals of creep in all basic classes of materials.

  • Rare Earths

    Science, Technology, Production and Use
    • 1st Edition
    • Jacques Lucas + 4 more
    • English
    High-technology and environmental applications of the rare-earth elements (REE) have grown dramatically in diversity and importance over the past four decades. This book provides a scientific understanding of rare earth properties and uses, present and future. It also points the way to efficient recycle of the rare earths in end-of-use products and efficient use of rare earths in new products. Scientists and students will appreciate the book's approach to the availability, structure and properties of rare earths and how they have led to myriad critical uses, present and future. Experts should buy this book to get an integrated picture of production and use (present and future) of rare earths and the science behind this picture. This book will prove valuable to.non-scientists as well in order to get an integrated picture of production and use of rare earths in the 21st Century, and the science behind this picture.

  • Porous Materials

    Processing and Applications
    • 1st Edition
    • Peisheng Liu + 1 more
    • English
    Engineers and scientists alike will find this book to be an excellent introduction to the topic of porous materials, in particular the three main groups of porous materials: porous metals, porous ceramics, and polymer foams. Beginning with a general introduction to porous materials, the next six chapters focus on the processing and applications of each of the three main materials groups. The book includes such new processes as gel-casting and freeze-drying for porous ceramics and self-propagating high temperature synthesis (SHS) for porous metals. The applications discussed are relevant to a wide number of fields and industries, including aerospace, energy, transportation, construction, electronics, biomedical and others. The book concludes with a chapter on characterization methods for some basic parameters of porous materials. Porous Materials: Processing and Applications is an excellent resource for academic and industrial researchers in porous materials, as well as for upper-level undergraduate and graduate students in materials science and engineering, physics, chemistry, mechanics, metallurgy, and related specialties.

  • Welding for Challenging Environments

    Proceedings of the International Conference on Welding for Challenging Environments, Toronto, Ontario, Canada, 15–17 October 1985
    • 1st Edition
    • Sam Stuart
    • English
    Welding for Challenging Environments documents the proceedings of the International Conference on Welding for Challenging Environments held in Ontario, Canada on October 15-17, 1985. This compilation provides a unique reference to the state of technological development, research, and application of welded fabrications in challenging environments. This book discusses the developments in pulsed gas metal arc welding; pulsed FM-GMA welding; and narrow gap welding of pressure vessels. The fracture toughness considerations for offshore structures; microcomputer method for predicting preheat temperatures; and submerged arc welding of high yield strength steel are also elaborated. This text likewise covers the influence of nitrogen content on deposited weld metal notch toughness gas-metal-slag interactions of binary fluxes containing CaF2 and evaluation of susceptibility of welds made with a stable austenitic welding wire to hot cracking. This publication is a good source for welders and metallurgists, as well as students interested in welded fabrications in challenging environments.

  • High-Entropy Alloys

    • 1st Edition
    • B.S. Murty + 2 more
    • English
    This book provides a complete review of the current state of the art in the field of high entropy alloys (HEA). The conventional approach to alloy design is to select one principal element and add elements to it in minor quantities in order to improve the properties. In 2004, Professor J.W. Yeh and his group first reported a new approach to alloy design, which involved mixing elements in equiatomic or near-equiatomic proportions, to form multi-component alloys with no single principal element. These alloys are expected to have high configurational entropy and hence were termed as "high entropy alloys."HEAs have a broad range of structures and properties, and may find applications in structural, electrical, magnetic, high-temperature, wear-resistant, corrosion-resistant, and oxidation-resistant components. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge present in the field, the spectrum of various alloy systems and their characteristics studied to date, current key focus areas, and the future scope of the field in terms of research and technological applications.

  • Friction Stir Processing for Enhanced Low Temperature Formability

    A volume in the Friction Stir Welding and Processing Book Series
    • 1st Edition
    • Christopher B. Smith + 1 more
    • English
    The use of friction stir processing to locally modify the microstructure to enhanced formability has the potential to alter the manufacturing of structural shapes. There is enough research to put together a short monograph detailing the fundamentals and key findings. One example of conventional manufacturing technique for aluminum alloys involves fusion welding of 5XXX series alloys. This can be replaced by friction stir welding, friction stir processing and forming. A major advantage of this switch is the enhanced properties. However qualification of any new process involves a series of tests to prove that material properties of interest in the friction stir welded or processed regions meet or exceed those of the fusion welded region (conventional approach). This book will provide a case study of Al5083 alloy with some additional examples of high strength aluminum alloys.

  • Treatise on Process Metallurgy, Volume 2: Process Phenomena

    • 1st Edition
    • Seshadri Seetharaman
    • English
    Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen’s famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area.

  • Treatise on Process Metallurgy, Volume 1: Process Fundamentals

    • 1st Edition
    • Seshadri Seetharaman
    • English
    Process metallurgy provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. Coverage is divided into three volumes, entitled Process Fundamentals, encompassing process fundamentals, extractive and refining processes, and metallurgical process phenomena; Processing Phenomena, encompassing ferrous processing; non-ferrous processing; and refractory, reactive and aqueous processing of metals; and Industrial Processes, encompassing process modeling and computational tools, energy optimization, environmental aspects and industrial design. The work distils 400+ years combined academic experience from the principal editor and multidisciplinary 14-member editorial advisory board, providing the 2,608-page work with a seal of quality. The volumes will function as the process counterpart to Robert Cahn and Peter Haasen’s famous reference family, Physical Metallurgy (1996)--which excluded process metallurgy from consideration and which is currently undergoing a major revision under the editorship of David Laughlin and Kazuhiro Hono (publishing 2014). Nevertheless, process and extractive metallurgy are fields within their own right, and this work will be of interest to libraries supporting courses in the process area.

  • Metal-Ceramic Interfaces

    Proceedings of an International Workshop
    • 1st Edition
    • M. Rühle + 3 more
    • English
    As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomi... of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.

  • Fundamentals and Applications of Ternary Diffusion

    Proceedings of the International Symposium on Fundamentals and Applications of Ternary Diffusion, Hamilton, Ontario, Canada, August 27-28, 1990
    • 1st Edition
    • G. R. Purdy
    • English
    This international symposium held in honor of Professor J\S\Kirkcaldy, will comprise review and research papers covering both fundamental and applied aspects of ternary diffusion. Over twenty individual contributions by internationally recognized authorities in the field, will be included.

  • Cyclic Deformation and Fatigue of Metals

    • 1st Edition
    • Volume 78
    • M. Bílý
    • English
    An integral review is given in this book on the fatigue phenomenon covering the fundamentals of fatigue damage initiation, relevant factors influencing fatigue crack propagation and fatigue life, random load analysis, and simulation for theoretical and experimental fatigue life assessment. The entire chain of problems related to fatigue of metals and structural components is covered. Specifically, it describes the low-cycle plastic properties and statistically interprets the material stress reaction, examining original results of investigations on inelastic deformations under high cycle cyclic loading and correlating them with a number of use parameters. The limit states of bodies with primary defects and their resistance to fatigue crack propagation are discussed. Measurements, analysis and real-time modelling of operating loads for experimental fatigue life verification are reviewed as well as introducing some new fatigue damage accumulation hypotheses based on dissipated energy. Various operating and environmental factors of the fatigue life are analyzed, including temperature, metal structures, corrosive environment, stress-strain amplitudes and their changes, random load (strain) properties, stress gradient frequency, mean level, etc. The work is intended for all those involved in research and development in the metal, machine and structure fields.

  • Production, Refining, Fabrication and Recycling of Light Metals

    Proceedings of the International Symposium on Production, Refining, Fabrication and Recycling of Light Metals, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • Michel Bouchard + 1 more
    • English
    The Proceedings describe recent developments in the field of smelting, refining and fabrication of aluminum and magnesium in Canada and abroad.

  • Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy

    • 1st Edition
    • R.S. Salter + 2 more
    • English
    Describes current advances in metallurgical processes applied to gold extraction.

  • F. Weinberg International Symposium on Solidification Processing

    Proceedings of the F. Weinberg International Symposium on Solidification Processing, Hamilton, Ontario, August 27-29, 1990
    • 1st Edition
    • J. E. Lait + 1 more
    • English
    This international symposium is in honour of Professor\F\Weinberg who will be retiring from the University of British Columbia this year, following a distinguished career. Six sessions have been organized on Fundamentals of Solidification, Non-ferrous Casting Processes, Continuous and Static Casting of Cast Iron, Novel Solidification Studies and Semiconductor and Optoelectronic Crystal Growth, addressing the state-of-the art in each of these areas. Keynote speakers for the six sessions are: Dr\K\Jackson, Dr\N\Bryson, Prof\H\A\Frederiksso... Prof\I\Minkoff, Prof\M\C\Flemings and Prof\R\Brown.

  • Strength of Metals and Alloys (ICSMA 8)

    Proceedings of the 8th International Conference on the Strength of Metals and Alloys Tampere, Finland, 22-26 August 1988
    • 1st Edition
    • P. O. Kettunen + 2 more
    • English
    Containing almost 250 technical and review papers, these proceedings form an authoritative, state-of-the-art review of this important multidisciplinary topic. Emphasis is placed on the study of the strength of mechanical properties of materials and their dependence on the microstructure and defect arrangements. Areas covered include: dislocations; dislocation arrangements; plastic deformation; strengthening mechanisms; cyclic deformation and fatigue; plastic deformation at high temperatures; fracture; modern strengthening methods in steels; boundaries and interfaces.

  • High Temperature Aluminides and Intermetallics

    Proceedings of the Second International ASM Conference on High Temperature Aluminides and Intermetallics, September 16-19, 1991, San Diego, CA, USA
    • 1st Edition
    • S.H. Whang + 2 more
    • English
    This volume of proceedings is concerned with an increasingly important area, that of intermetallics and high temperature aluminides, which has recently been attracting a great deal of attention. Nearly 150 papers presented at the meeting held in San Diego in September 1991 are reproduced here. They cover a wide range of related topics such as the bonding characteristic and alloying behaviour of TiA1 intermetallic compounds and the cleavage fracture of ordered intermetallic alloys. All the papers have been reviewed according to the standards set by Materials Science and Engineering. This book will be of interest to metallurgists and materials scientists working with composites who are interested in the latest developments in this fast–moving field.

  • Ferrous and Non-Ferrous Alloy Processes

    Proceedings of the International Symposium on Ferrous and Non-Ferrous Alloy Processes, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • R. A. Bergman
    • English
    The Proceedings focus primarily on alloys used in the iron and steel industry. Operating papers discuss the production of stainless steel from nickel ore by combining the Krupp-Renn with the BOF process, the production of ferro-nickel by a novel electric furnace process and chromium containing iron in the BOF, as well as furnace lining problems in ferro alloy smelting. A number of papers deal with various aspects of ferro-manganese production and ferro-molybdenum. The use of engineered carbide desulphurizer and the application of innovative cored wire in steel making is highlighted. Studies into the production of titanium silicide and the process leading to the recovery of vanadium from Suncor flyash is presented. Results of experimental work dealing with the preparation of nickel chromium alloys from Bird River chromite and nickel sulphide are discussed.

  • Materials Handling in Pyrometallurgy

    Proceedings of the International Symposium on Materials Handling in Pyrometallurgy, Hamilton, Ontario, August 26-30, 1990
    • 1st Edition
    • C. Twigge-Molecey + 1 more
    • English
    This book which describes the world of metallurgical processing is influenced by a variety of factors not directly metallurgical. One major factor in all applications is materials handling. In Pyro-metallurgical processes, the processes are interconnected by materials handling systems which often require a major percentage of plant cost. The systems include sampling, storage, weighing, feeding and transporting of materials which all actively affect the performance of the metallurgical processes. Increasing productivity and improvements to plant environment demand that materials handling be improved. At the same time, sophisticated sampling and control systems are required to optimize the recipes and allow controlled reactions. By using handling technologies that accommodate both the process and the environment, sustainable improvements can be made.

  • Proceedings of the International Symposium on Electrometallurigical Plant Practice

    The Metallurgical Society of CIM Hydrometallurgy Section
    • 1st Edition
    • P. L. Claessens
    • English
    The Symposium covers most of the aspects of modern aqueous electrometallurgical practice, with a stronger emphasis on copper than zinc and nickel, which can be regarded as being the three major electrolytic metals. Of the minor electrolytic metals, there are contributions describing cobalt, lead and gold electrometallurgy, as well as the production of electrolytic manganese dioxide. The sessions divide neatly into modern copper tankhouse practice, purification techniques, modernization and automation, and new developments. A cross section of worldwide practice is represented, with a perhaps understandable concentration of Canadian operations. Plant tours to a modern zinc electrowinning operation, CEZ Inc at Valleyfield, and one of the world's largest copper refineries, Noranda Minerals, Inc., CCR Division in Montreal East, have been included as an integral part of the Symposium.

  • Advances in Phase Transitions

    Proceedings of the International Symposium Held at McMaster University Ontario, Canada, 22-23 October 1987
    • 1st Edition
    • J. D. Embury + 1 more
    • English
    This book provides a record of the symposium held at McMaster University, Ontario, Canada, in honour of Professor J\S\Kirkaldy, and covers the recent progress being made in phase transformations, both experimental and theoretical, to facilitate the understanding of microstructural development. This volume includes new material on atomic modelling of phase transitions, descriptions of amorphous-crystallin... transitions, new data on motion of interfaces, elastic energy effects and pattern forming systems, as well as contributions from related disciplines such as thermodynamics, kinetics and the mechanics of solids.