Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

Books Journals

Foundations of Mechanics

1st Edition
Volume 28
October 22, 2013
Stanislaw Bazanski
H. Zorski
English
eBook
9 7 8 1 4 8 3 2 9 1 6 1 1

In the last three decades the field of mechanics has seen spectacular progress due to the demand for applications in problems of cosmology, thermonuclear fusion, metallurgy, etc. This book provides a broad and thorough overview on the foundations of mechanics. It discusses theoretical mechanics and continuum mechanics, as well as phenomenological thermodynamics, quantum mechanics and relativistic mechanics. Each chapter presents the basic physical facts of interest without going into details and derivations and without using advanced mathematical formalism. The first part constitutes a classical exposition of Lagrange's and Hamilton's analytical mechanics on which most of the continuum theory is based. The section on continuum mechanics focuses mainly on the axiomatic foundations, with many pointers for further research in this area. Special attention is given to modern continuum thermodynamics, both for the foundations and applications. A section on quantum mechanics is also included, since the phenomenological description of various quantum phenomena is becoming of increasing importance. The work will prove indispensable to engineers wishing to keep abreast of recent theoretical advances in their field, as well as initiating and guiding future research.

Strength of Structural Elements

1st Edition
Volume 26
October 22, 2013
Zbigniew Brzoska
M. Zyczkowski
English
eBook
9 7 8 1 4 8 3 2 9 1 6 9 7

This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.

Surveying Instruments and their Operational Principles

1st Edition
Volume 62
October 22, 2013
L. Fialovszky
English
eBook
9 7 8 0 4 4 4 5 9 9 0 3 2

The book gives a detailed theoretical background of the constructional principles of instruments necessary for the most general tasks of surveying. Undergraduate and graduate students will find it very useful in surveying studies to get acquainted with the broad variety of instruments, both classical and new ones. At the same time, specialists in surveying will also find the book full of new material. The book contains about 600 pictures, including photographs and detailed descriptions of the most representative types of instrumentation. Older types of instruments already out of use, or used only occasionally, are described in broad outline, mentioning basic principles, methods of testing and possibilities for their modernization. New categories of instruments, such as gyroscopes, compensation levelling instruments, electronic theodolites, distance meters and tacheometers, are dealt with in more detail. Care has been taken to include the automation which is rapidly spreading in all fields of instrument manufacture, being necessary to reduce manual operations.The book is intended for builders, architects, technicians, teachers of surveying and professional manufacturers.

Stress Analysis by Boundary Element Methods

1st Edition
Volume 23
October 22, 2013
J. Balaš + 2 more
English
eBook
9 7 8 1 4 8 3 2 9 1 7 4 1

The boundary element method is an extremely versatile and powerful tool of computational mechanics which has already become a popular alternative to the well established finite element method. This book presents a comprehensive and up-to-date treatise on the boundary element method (BEM) in its applications to various fields of continuum mechanics such as: elastostatics, elastodynamics, thermoelasticity, micropolar elasticity, elastoplasticity, viscoelasticity, theory of plates and stress analysis by hybrid methods. The fundamental solution of governing differential equations, integral representations of the displacement and temperature fields, regularized integral representations of the stress field and heat flux, boundary integral equations and boundary integro-differential equations are derived. Besides the mathematical foundations of the boundary integral method, the book deals with practical applications of this method. Most of the applications concentrate mainly on the computational problems of fracture mechanics. The method has been found to be very efficient in stress-intensity factor computations. Also included are developments made by the authors in the boundary integral formulation of thermoelasticity, micropolar elasticity, viscoelasticity, plate theory, hybrid method in elasticity and solution of crack problems. The solution of boundary-value problems of thermoelasticity and micropolar thermoelasticity is formulated for the first time as the solution of pure boundary problems. A new unified formulation of general crack problems is presented by integro-differential equations.

Stability in the Dynamics of Metal Cutting

1st Edition
Volume 22
October 22, 2013
S.T. Chiriacescu
English
eBook
9 7 8 1 4 8 3 2 9 1 7 5 8

Numerous models have been proposed for the study of the dynamic behaviour of cutting tools. An analysis of the main works published over the past 20 years reveal a lack of general methodology in the mathematical modelling of the dynamic cutting process (CP) and in the elastic structure (ES), as well as the absence of efficient and general methods for identifying the conditions under which the amplitudes of the vibration chatter between tool and workpiece can become problematic.This book provides a thorough review on the mathematical modelling and stability analysis of the dynamic machining system, presenting solutions for the practical problems that can be encountered. The practical points of the stability and instability of the DMS are discussed, together with various aspects of the modelling and identification of the CP and ES systems. The latest findings are examined in the context of a general study using matrix equations. Such a study on the matrix method is timely in view of the rapid spread in the use of mini and micro-computers.Base... on the matrix equations of the CP and ES systems, the general equations of the DMS with time-invariant parameters are established, and various procedures for the actual stability analysis of this system are presented. Many examples are accompanied by illustrations which also provide adequate practical instructions for other problems in the stability analysis of the DMS. The last part of the book deals with the modelling and stability analysis of the DMS with time-varying parameters, random parameters and random input. The work is addressed primarily to those interested in the design and exploitation of machine tools in both industry and research. It will also be of interest to applied mathematicians, and can be used as a reference book for advanced courses in mechanical engineering.

Stresses in Layered Shells of Revolution

1st Edition
Volume 24
October 22, 2013
V. Kovarik
English
eBook
9 7 8 1 4 8 3 2 9 1 7 7 2

Shell structures are key components in a very wide range of engineering enterprises. The theory of layered shells of revolution under the quasistatic action of loading and temperature is the subject of this book. The shells treated here are in general of an asymmetric sandwich structure. A linear theory is developed which allows for a transition to shells with less layers, that is two-layered and homogeneous structures.The first half of the book is concerned with orthotropic elastic shells. In particular, it includes the membrane theory of cylindrical, spherical and conical shells, and the bending theory of cylindrical shells, storage tanks and pressure-vessels. In each of the numerical examples considered, an attempt is made to map different regimes of structural behaviour.The second half of the book is devoted to viscoelastic shells. First the time-invariant hereditary theory is presented, describing the response of viscoelastic materials. According to the correspondence principle of this theory the actual viscoelastic shell may be replaced by a conjugate elastic one. In this way many of the results from the first half of the book can be put to good use even for viscoelastic shells. The time-dependent material characteristics are taken into account by means of the time-temperature principle.In an appendix (Part VI), the mathematical prerequisites are presented. With viscoelasticity comes the need to employ further mathematical disciplines; integral equations and integral transformations are usually encountered. Here, instead, a different concept has been chosen, the distributional concept of Laurent Schwartz, which allows many problems to be tackled in a simple formal way. In discussing the distribution theory, a level accessible to a technical reader has been maintained.The book is intended as a textbook for students and teachers of structural and aeronautical engineering. The book will also appeal to a broad range of practising engineers working in areas of aeronautical, civil, and mechanical engineering, as well as to those working for firms dealing with shell structures.

Theory of Plasticity and Limit Design of Plates

1st Edition
Volume 18
October 22, 2013
Z. Sobotka
English
eBook
9 7 8 1 4 8 3 2 9 1 7 9 6

An extensive review of the theory of plasticity, limit design and limit analysis of plates is contained in this volume. Detailed descriptions are given on the plastic behaviour of homogeneous, reinforced and sandwich plates, and on the rise of various yield-line patterns. The volume differs from other books on the plastic analysis of plates by its comprehensive treatment of: the theory of yield fans connected with yield-line planning; the plastic behaviour of plates under combined loadings characterized by the load factors; statical solutions; and continuous, rectangular and skew plates.Before discussing the upper-bound solutions for various types of ultimate loads acting on isotropic, orthotropic and anisotropic plates, the kinematic conditions of the plastic behaviour of plates and the principles and methods of the yield-line theory are examined in detail. Generalized yield conditions of the second degree for orthotropic and anisotropic plates are introduced. Special attention is paid to the rise of yield fans. The concept of yield line planning is also discussed, which may be of practical interest since it indicates the possibilities for preventing the rise of yield fans. Upper-bound and lower-bound solutions for the ultimate uniform load, concentrated loads, triangular and trapexoidal loads, are presented. Similar solutions are provided for continuous loads bounded by various plane and curved surfaces and for various combinations of loads acting on rectangular, polygonal, circular, elliptic and skew plates. Solutions are given for plates on hinged supports, on free supports with elevating corners, on point supports and also for plates with built-in edges. Numerical tables are provided for determining the ultimate loads, bearing moments needed for the given load systems and the parameters of yield-line patterns. The procedures detailed in the volume will prove an indispensable reference source in the practical design of roof, ceiling and bridge slabs.

Soil Mechanics of Earthworks, Foundations and Highway Engineering

1st Edition
Volume 3
October 22, 2013
Bozzano G Luisa
English
eBook
9 7 8 1 4 8 3 2 9 1 8 1 9

This is the third volume of a handbook which covers the whole field of soil mechanics, discussing deterministic and stochastic theories and methods, and showing how they can be used in conjunction with one another. The first volume discusses soil physics, while the second deals with the determination of physical characteristics of the soil. Australian Mining wrote of the Handbook ``a valuable addition to the extensive literature on the topic and will be found to be more useful than most.''The main objective of the third volume is to present solutions to the problems of engineering practice. It deals with the most important theoretical and practical problems of soil mechanics, discussing the following in detail: stability of earthworks, load-bearing capacity and settlement of shallow foundations, design of pile foundations, soil mechanics in road construction, improving the physical properties of soils, the characteristics of soil dynamics, foundations for machines and soil behaviour as affected by earthquakes. The book not only presents up-to-date deterministic methods, but also discusses solutions of probability theory in the fields of design and safety.The book is divided into six chapters covering the stability of slopes, landslides, load-bearing capacity and settlement of shallow foundations and pile foundations, soil mechanics in road construction, and the improvement of the physical characteristics of soil with special emphasis on machine foundations and earthquakes, giving detailed treatment of each subject. For example, the first chapter deals not only with the stability of slopes, but also discusses the natural and artificial effects, slope protection, filter design, stresses in embankments, and the time factor. In this way, the book gives a clear and comprehensive picture of the special fields of soil mechanics and its subjects. It is therefore emminently suitable for postgraduate engineers, and engineers working in the fields of geotechnics, earthworks, foundations, road construction, engineering geology and statistics, and the design of structures.

Mechanics and Strength of Materials

1st Edition
Volume 1
October 22, 2013
Bogdan Skalmierski
English
eBook
9 7 8 1 4 8 3 1 0 2 5 5 9

Mechanics and Strength of Materials focuses on the methodologies used in studying the strength of materials. The text first discusses kinematics, and then describes the motion of a single particle; description of the motion of a rigid body; plane motion of a rigid body; and examples of the determination of velocities and accelerations in the motion of plane mechanism. The book explains the dynamics of a particle and statics, including the center of mass and gravity of a particle system; law of variation of angular momentum; analytical and graphical methods in the statics of plane systems; and spatial system of forces. The text also discusses the statics of elastic systems, and then describes the strength calculations of beams; problems of simple beam-bending; geometric moments of inertia; buckling problems of axially compressed rods; and simultaneous bending and torsion of rods with circular cross-section. The book focuses on the dynamics of rigid bodies, dynamics in relative motion, and fundamentals of analytical mechanics. The text further looks at vibrations of systems with one degree and many degrees of freedom. The book is a good source of data for readers interested in studying the strength of materials.

Applied Mechanics

1st Edition
October 22, 2013
George E. Drabble
English
eBook
9 7 8 1 4 8 3 1 0 5 5 0 5

Applied Mechanics: Made Simple presents the fundamental principles of Mechanics and their application to engineering problems. The book describes the principles of Statics and the principles of Dynamics. The text also discusses motion, kinematics, forces, and laws governing the combination of two or more forces, as well as the link between force and motion (kinetics). The concepts of work, energy, power, momentum, and stress and strain, as well as the applications of these concepts (the bending of beams and the twisting of shafts) are also considered. The book concludes by tackling the study of forces applied to fluids. First year engineering students will find the book invaluable.

Related subjects

Aerospace sciences

Automotive engineering

Civil and structural engineering

Electrical and electronic engineering

General engineering

Industrial engineering

Marine engineering

Materials engineering

Mechanical engineering

Mechanics

Media technology

Numerical methods in engineering

Systems and control

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health