Skip to main content
Elsevier
View Cart
My account

Books in Energy and power

Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.

BooksJournals

    • New Insulators Devices and Radiation Effects

      • 1st Edition
      • Volume 3
      • February 11, 1999
      • English
      • Hardback
        9 7 8 0 4 4 4 8 1 8 0 1 0
      • Paperback
        9 7 8 0 4 4 4 5 5 2 0 5 1
      • eBook
        9 7 8 0 0 8 0 5 3 4 7 6 3
      Silicon technology today forms the basis of a world-wide, multi-billion dollar component industry. The reason for this expansion can be found not only in the physical properties of silicon but also in the unique properties of the silicon-silicon dioxide interface. However, silicon devices are still subject to undesired electrical phenomena called "instabilities". These are due mostly to the imperfect nature of the insulators used, to the not-so-perfect silicon-insulator interface and to the generation of defects and ionization phenomena caused by radiation.The problem of instabilities is addressed in this volume, the third of this book series.Vol.3 updates and supplements the material presented in the previous two volumes, and devotes five chapters to the problems of radiation-matter and radiation-device interactions. The volume will aid circuit manufacturers and circuit users alike to relate unstable electrical parameters and characteristics to the presence of physical defects and impurities or to the radiation environment which caused them.

    • Greenhouse Gas Control Technologies

      • 1st Edition
      • May 20, 1999
      • B. Eliasson + 2 more
      • English
      • eBook
        9 7 8 0 0 8 0 5 5 3 0 3 0
      These proceedings contain 270 papers outlining ideas and contributions to the new scientific, technical and political discipline of Greenhouse Gas (GHG) Control. The contributions were presented at the 4th International Conference on Greenhouse Gas Control Technologies (GHGT-4). It was the largest gathering of experts active in this new and fast-developing field.GHGT-4 was different from its predecessors in that it included all greenhouse gases, not only CO2, and all issues which could contribute to the mitigation of the greenhouse problem - technical, economic and political. The main focus was on practical solutions and real demonstrations of mitigation technology being planned and implemented today. It also addressed ways to increase the efficiency of power production and utilisation, and looked at proposals to encourage the development of renewable energy sources.During the Opening Session, 10 keynote addresses were heard from prominent personalities in government, industry and academia. To tackle this very inter-disciplinary problem and to achieve acceptable solutions, it is essential for industry and government to initiate intense dialogue and cooperation. Conferences like this can provide the opportunity for a meeting of minds between engineers and politicians in the face of global challenge. The primary attributes of this global challenge are manifold: the problem is global and international; it is inter-disciplinary, both in substance and approach; it covers technical, political and economic issues and involves government, science, industry and academia; it is complex and non-linear; and it will take the efforts of all parties involved to solve the problem.These proceedings contain ideas for starting demonstration projects and for making better use of the power and flexibility of market measures. They also show it is a problem we can influence and that there is a wealth of ideas. The challenge now is to find the right partners to put these ideas into action.

    • Measuring Current, Voltage and Power

      • 1st Edition
      • Volume 7
      • June 1, 1999
      • K. Iwansson + 3 more
      • English
      • Hardback
        9 7 8 0 4 4 4 7 2 0 0 1 6
      • eBook
        9 7 8 0 0 8 0 5 2 3 9 7 2
      This authoritative new book focuses on recent developments in the instrumentation for sending voltages and currents. It covers new trends and challenges in the field, such as measurements of biocurrents, the increased speed of the components for data taking, testing of computers and integrated circuits where the measurement of rapid voltage and current variations on a very small geometrical scale is necessary. The first chapter concentrates on recent methods to sense voltages and currents, while the rest of the book investigates the applied side, covering for instance electrical power and energy measurements. The main purpose of this volume is to illustrate commonly employed techniques rather than track the scientific evolution and merits and therefore mainly covers patent literature aimed at industrial applications. It is an exciting addition, justifying the series' claim to cover state-of-the-art developments in both the applied and theoretical fields of sensors and actuators.The measurement of voltages and currents is a common task in the field of electricity and electronics. From a technical point of view it is useful to identify schematically different steps of such a measurement. In a first step a voltage or a current is sensed, intermediate steps such as amplification, transmission and further treatment may follow to yield the result in the final step. Today in most cases microprocessors perform the final steps of such measurements. Analog-to digital converters digitise a voltage that is proportional to the value to be measured and a processor performs further computations and handles the storage and the display of the results. The prerequisite for such measurements are sensors or transducers that respond in a known way to the voltage or current to be measured. The emphasis of this book is put on recent developments of the instrumentation for sensing voltages and currents.Aside from the general trend towards smaller, cheaper and more reliable instrumentation, new demands have arisen. New applications, like measurements of biocurrents, ask for higher sensitivities. Computers and integrated circuits pose new challenges. To exploit the increased speed of the components for data taking, suitable sensors are required. The accuracy that can be achieved depends more than ever on the first step, the acquisition of the raw data. The influence of the measurement process on the results becomes more crucial. Testing of integrated circuits themselves is a completely new application. For such tests one has to measure rapid voltage and current variations on very small geometrical scales. Here, as well as in the traditional high voltage applications, contactless measurements play an important role.The organisation of this book is as follows: In the first chapter different methods to sense voltages and currents are described. For the sake of completeness most commonly used methods are mentioned, we concentrate, however, on those developed recently. The chapters address the subject from the side of different applications in which voltages and currents are sensed.Since the main purpose of this publication is to illustrate commonly employed techniques rather than to track the scientific evolution and merits in particular fields, in general those publications that illustrate a particular measurement principle best have been cited. The citation of a particular reference does therefore not imply that this is the first or most pertinent publication in the respective field.

    • Transmission and Distribution Electrical Engineering

      • 2nd Edition
      • April 12, 1999
      • Colin Bayliss + 1 more
      • English
      • Hardback
        9 7 8 0 7 5 0 6 4 0 5 9 6
      • eBook
        9 7 8 0 0 8 0 4 7 7 4 9 7
      This comprehensive treatment of the theory and practice encountered in the installation and design of transmission and distribution systems for electrical power has been updated and revised to provide the project engineer with all the latest, relevant information to design and specify the correct system for a particular application.

    • China's Oil Industry and Market

      • 1st Edition
      • August 9, 1999
      • H.H. Wang
      • English
      • Paperback
        9 7 8 0 4 4 4 5 4 4 4 3 8
      • Hardback
        9 7 8 0 0 8 0 4 3 0 0 5 8
      • eBook
        9 7 8 0 0 8 0 5 2 9 1 1 0
      This authoritative book on China's oil demand and government policies and practices rests on two essential foundations: first and foremost on the author's considerable knowledge of China's oil situation and prospects, together with his access to Chinese energy literature and data; and secondly, on that insight afforded to him and, therefore, his readers from his fluency in Chinese.The author analyzes the Chinese oil market and the rising pressure on Beijing to reform policies which constrain China's ability to meet soaring demand and to pay for crucial imports at a time of growing political and economic uncertainties. Dr Wang acknowledges the importance of China meeting its growing domestic oil demand, if at all possible, through national production. The sheer weight of China's population, and its burgeoning requirements as industrialization spreads into most regions, dwarfs the needs of others and places unprecedented strain on international oil trades.The author stresses the fact that the outcome is hard to define, yet the time required to tackle the nation's energy needs is not limitless. Moreover, he reminds the reader of the perennial difficulty in meeting widely disparate economic and energy needs in different regions of the vast country.

    • PVT and Phase Behaviour Of Petroleum Reservoir Fluids

      • 1st Edition
      • Volume 47
      • May 7, 1998
      • Ali Danesh
      • English
      • Hardback
        9 7 8 0 4 4 4 8 2 1 9 6 6
      • Paperback
        9 7 8 0 4 4 4 5 5 1 0 6 1
      • eBook
        9 7 8 0 0 8 0 5 4 0 0 5 4
      This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.

    • Tribology for Energy Conservation

      • 1st Edition
      • Volume 34
      • July 23, 1998
      • L. Flamand + 7 more
      • English
      • Hardback
        9 7 8 0 4 4 4 5 0 0 3 3 5
      • eBook
        9 7 8 0 0 8 0 5 4 3 2 8 4
      The 24th Leeds-Lyon Symposium was held in London from 4th-6th September 1997, where it was hosted by the Imperial College of Science, Technology and Medicine.The meeting addressed the topic of "Tribology for Energy Conservation" and attracted a wide range of stimulating papers and speakers. Some 150 delegates from nineteen countries attended and about sixty papers were presented in fifteen sessions. These covered the topics of lubricants, wear, friction reduction, hydrodynamics, elastohydrodynamic lubrication, surface roughness, manufacturing, component life (including condition monitoring), and automotive aspects.

    • Natural Gas Conversion V

      • 1st Edition
      • Volume 119
      • September 17, 1998
      • A. Parmaliana + 4 more
      • English
      • Hardback
        9 7 8 0 4 4 4 8 2 9 6 7 2
      • eBook
        9 7 8 0 0 8 0 5 3 7 3 0 6
      On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

    • Biomass for Renewable Energy, Fuels, and Chemicals

      • 1st Edition
      • June 25, 1998
      • Donald L. Klass
      • English
      • Hardback
        9 7 8 0 1 2 4 1 0 9 5 0 6
      • Paperback
        9 7 8 0 1 2 3 8 8 6 5 7 6
      • eBook
        9 7 8 0 0 8 0 5 2 8 0 5 2
      Biomass for Renewable Energy, Fuels, and Chemicals serves as a comprehensive introduction to the subject for the student and educator, and is useful for researchers who are interested in the technical details of biomass energy production. The coverage and discussion are multidisciplinary, reflecting the many scientific and engineering disciplines involved. The book will appeal to a broad range of energy professionals and specialists, farmers and foresters who are searching for methods of selecting, growing, and converting energy crops, entrepreneurs who are commercializing biomass energy projects, and those involved in designing solid and liquid waste disposal-energy recovery systems.

    • Simplified Design of Voltage/Frequency Converters

      • 1st Edition
      • August 19, 1997
      • John Lenk
      • English
      • Paperback
        9 7 8 0 7 5 0 6 9 6 5 4 8
      • eBook
        9 7 8 0 0 8 0 5 1 7 2 1 6
      Simplified Design of V/F Converters shows how to design and experiment with V/F converters, both voltage-to-frequency and frequency-to-voltage... The design approach here is the same one used in all of John Lenk's best-selling books on simplified and practical design. Throughout the book, design problems start with guidelines for selecting all components on a trial-value basis, assuming a specific design goal and set of conditions. Then, using the guideline values in experimental circuits, the desired results are produced by varying the experimental component values, if needed. If you are a working engineer responsible for designing VFCs, or selecting IC converters, the variety of circuit configurations described here should simplify your task. Not only does the book describe converter-circuit designs, but it also covers the most popular forms of VFC ICs available. Throughout the book, you will find a wealth of information on VFC ICs and related components, including how to test and troubleshoot completed circuits.

Related subjects

Electric power

Energy conservation and environment

Energy general

Energy policy business and economics

Fossil fuels

Nuclear energy and engineering

Renewable energy and alternative technologies