Skip to main content

Books in Energy and power

Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.

    • Energie

      • 1st Edition
      • October 22, 2013
      • André Gardel
      • English
      • Paperback
        9 7 8 1 4 8 3 1 2 0 2 6 3
      • eBook
        9 7 8 1 4 8 3 1 5 2 6 8 4
    • Nuclear Reactor Kinetics and Control

      • 1st Edition
      • October 22, 2013
      • Jeffery Lewins
      • English
      • eBook
        9 7 8 1 4 8 3 2 7 8 7 5 9
      Nuclear Reactor Kinetics and Control highlights the application of classical control methods in the frequency space to the dynamic processes of a nuclear reactor. This book contains nine chapters and begins with an introduction to some important mathematical theories related to nuclear engineering, such as the Laplace and Fourier transforms, linear system stability, and the probability theory. The succeeding chapters deal with the frequency space of classical linear design. A chapter describes a stochastic model for the “lumped reactor” and presents equations that measure the departure from the mean, as well as representative experiments or applications of the theory to neutron detection. The discussion then shifts to the aspects of reliability and its consequences for safety of nuclear reactors and some techniques for nonlinear studies centered on the use of the state space and its equations in the time domain. The final chapter introduces the modern electric analogue computer and derives the patching or programming rules that can be use to find solutions to problems of interest using the analogous behavior of electric circuits. This chapter also provide examples of intrinsic interest in nuclear engineering showing the programming involved and typical results, including the slower transients of xenon poisoning and fuel burn-up. This book is intended for nuclear engineers, physicists, applied mathematicians, and nuclear engineering undergraduate and postgraduate students.
    • Energy Balances and Energy Accounting

      • 1st Edition
      • October 22, 2013
      • Sam Stuart
      • English
      • Paperback
        9 7 8 0 0 8 0 3 3 4 3 9 4
      • eBook
        9 7 8 1 4 8 3 1 3 6 9 1 2
      Energy Balances and Energy Accounting, an extract from the book Energy Terminology: A Multilingual Glossary, is a multi-lingual glossary of different terms and concepts related to energy and energy accounting. The definitions covered in this book include general terms and concepts in the study of energy, energy balances, additional energy accounting terms, and energy use. Concise yet very informative, this book is a good reference for those who are studying or working in the field of physics, those who do not have English as their primary language, and those working in the countries that use French, Spanish, and German as their national language.
    • Ninth Symposium (International) on Combustion

      • 1st Edition
      • September 11, 2013
      • Sam Stuart
      • English
      • eBook
        9 7 8 1 4 8 3 2 6 1 5 7 7
      Ninth Symposium (International) on Combustion covers the proceedings of the Ninth Symposium (International) on Combustion, held at Cornell University in Ithaca, New York on August 27 to September 1, 1962, under the auspices of the Combustion Institute. The book focuses on the processes and reactions involved in combustion. The selection first offers information on flame strength of propane-oxygen flames at low pressures in turbulent flow and mixing and flow in ducted turbulent jets. Topics include radial profile of the jetting velocity, radial growth of the jet, and mixing zones of a ducted jet. The text then elaborates on turbulent flame studies in two-dimensional open burners; turbulent mass transfer and rates of combustion in confined turbulent flames; and flame stabilization in a boundary layer. The publication examines the theoretical study of properties of laminar steady state flames as a function of properties of their chemical components and spectra of alkali metal-organic halide flames. The text then takes a look at the thermal radiation theory for plane flame propagation in coal dust clouds; flame characteristics of the diborane-hydrazine system; and studies of the combustion of dimethyl hydrazine and related compounds. The selection is a dependable reference for readers interested in the processes and reactions involved in combustion.
    • High Voltage Engineering

      • 1st Edition
      • October 22, 2013
      • Peter Kuffel + 1 more
      • P. Hammond
      • English
      • Paperback
        9 7 8 0 0 8 0 2 4 2 1 2 5
      • eBook
        9 7 8 1 4 8 3 2 8 5 6 5 8
      Provides a comprehensive treatment of high voltage engineering fundamentals at the introductory and intermediate levels. It covers: techniques used for generation and measurement of high direct, alternating and surge voltages for general application in industrial testing and selected special examples found in basic research; analytical and numerical calculation of electrostatic fields in simple practical insulation system; basic ionisation and decay processes in gases and breakdown mechanisms of gaseous, liquid and solid dielectrics; partial discharges and modern discharge detectors; and overvoltages and insulation coordination.
    • Marine Sources of Energy

      • 1st Edition
      • September 17, 2013
      • Jacques Constans
      • English
      • Hardback
        9 7 8 0 0 8 0 2 3 8 9 7 5
      • Paperback
        9 7 8 1 4 8 3 1 2 1 7 6 5
      • eBook
        9 7 8 1 4 8 3 1 5 4 1 8 3
      Marine Sources of Energy focuses on international research and development activities in the field of marine sources of energy such as waves, tides, currents, winds, and salinity gradients. General and specific recommendations for future research and development programs are presented, along with plans for action to demonstrate and amplify the potential of a number of marine energy sources both in Europe and in developing countries. This book consists of seven chapters and begins with a discussion on offshore coastal wind energy conversion, along with the advantages and limitations of wind energy and its economic aspects. The reader is then introduced to ocean thermal energy conversion (OTEC), with particular reference to the factors that must be taken into account when selecting sites for an OTEC plant. The following chapters consider the solar pond concept and its possible application to heat production and energy production; and the economic aspects of wave and tidal energy conversion. Other possibilities of marine energy conversion, including marine currents and biomass energy conversion, are evaluated. This monograph will be of interest to government officials and policymakers concerned with marine and other alternative sources of energy.
    • Pipeline and Energy Plant Piping

      • 1st Edition
      • October 22, 2013
      • Sam Stuart
      • English
      • Paperback
        9 7 8 1 4 8 3 1 1 2 7 3 2
      • eBook
        9 7 8 1 4 8 3 1 4 5 1 5 0
      Pipeline and Energy Plant Piping: Design and Technology covers the proceedings of an international conference, “Pipeline and Energy Plant Piping – Fabrication in the 80’s”. The book covers the total spectrum of technology relevant to pipeline fabrication, design, materials, welding process, inspection, defect acceptance, performance, and project management. The text also discusses other energy systems, such as nuclear, hydroelectric, oil, and gas transmission, to understand the technological demands of energy production and distribution. The text will be of great interest to professionals such as engineers whose line of work involves the management and regulation of piping systems.
    • Europe's Nuclear Power Experiment

      • 1st Edition
      • October 22, 2013
      • E. N. Shaw
      • English
      • Hardback
        9 7 8 0 0 8 0 2 9 3 2 4 0
      • Paperback
        9 7 8 1 4 8 3 2 3 4 5 9 5
      • eBook
        9 7 8 1 4 8 3 2 7 9 1 8 3
      Europe's Nuclear Power Experiment: History of the OECD Dragon Project discusses the achievements of the Project, which is regarded as one of Europe's most successful collaborations in applied science and certainly the most important multinational technical collaboration in the field of nuclear energy. The Project is centered on the construction of a nuclear reactor that is to demonstrate the essential properties of a new system, designed to produce higher temperatures than could be achieved with the first generation of reactors. After a brief introduction to the political collaboration and technical development of the Project, this 28-chapter goes on dealing with the competitive forms of cooperation in nuclear energy and the function of the European Nuclear Energy Agency. The succeeding chapters survey various aspects of nuclear reactor and the Dragon Project Agreement, its long-term role, research and development, industrialization, and supervision by the signatories. Other chapters consider other details and contributions of various member countries in the Project. The concluding chapters discuss the Project's extension program and its achievements. This book is of value to nuclear power scientists and researchers.
    • Profile of the Worldwide Semiconductor Industry - Market Prospects to 1997

      • 1st Edition
      • October 22, 2013
      • A. Fletcher
      • English
      • Paperback
        9 7 8 1 8 5 6 1 7 1 8 5 4
      • eBook
        9 7 8 1 4 8 3 2 8 4 8 5 9
      Please note this is a Short Discount publication.The prolongation of global recession continues to have a significant impact on this core sector of the electronics industry, compelling many manufacturers to review their operations and business strategies. Fierce competition and the need to reduce costs have resulted in many companies cutting back on commercial sales to concentrate on vertically integrated manufacturing or in new alliances being forged to strengthen product portfolios whilst minimising R & D costs.This updated sixth edition of the report charts industry developments, including shifts in industry structure, joint ventures, trends in product design and markets and provides new industry forecasts to 1997.