Skip to main content
Elsevier

Newnes

  • Engineering Materials Technology

    • 2nd Edition
    • William Bolton
    • English
    Engineering Materials Technology, Second Edition discusses the underlying principles of materials selection in mechanical and production engineering. The book is comprised of 20 chapters that are organized into five parts. The text first covers the structure of materials, such as metals, alloys, and non-metals. The second part deals with the properties of materials, which include fracture, fatigue, and creep. The third and fourth parts discuss the characteristics of metals and non-metals, respectively. The last part deals with the selection process; this part takes into consideration the various properties of materials and the processes it goes through. The book will be of great use to students and practitioners of mechanical and production engineering.

  • Feature Extraction and Image Processing

    • 1st Edition
    • Mark Nixon
    • English
    Focusing on feature extraction while also covering issues and techniques such as image acquisition, sampling theory, point operations and low-level feature extraction, the authors have a clear and coherent approach that will appeal to a wide range of students and professionals.

  • Production Engineering

    Jig and Tool Design
    • 8th Edition
    • E. J. H. Jones + 1 more
    • English
    Production Engineering: Jig and Tool Design focuses on jig and tool design as part of production engineering and covers topics ranging from inspection and gauging to multiple and consecutive tooling, tool calculation and development of form tools, deep-hole boring, and grinding-wheel form-crushing. Air and oil operated fixtures, negative rake machining, and the economics of jig and fixture practice are also discussed. This text is comprised of 22 chapters; the first of which provides an overview of the function and organization of the jig and tool department. Attention then turns to the subject of cutting tool materials, with emphasis on the science of surface technology and the effects on the economics of tooling. A chapter on diamond tools offers insights into boring and turning operations, and examples of the features of preset tooling are presented. The chapter on air or oil operated fixtures contains examples from actual practice, some of the pneumatic examples being applicable to holding small units where the machining time is in seconds, and the rapid insertion and removal of work is essential. The reader is also introduced to the methods of truing grinding wheels, including surface grinding, and diamond honing. The book concludes by highlighting the problem of small batch manufacture in transfer machining and group technology. This book is intended not only for the experienced jig and tool designers but also for the production engineering students and the technical college lecturers.

  • Characterization in Silicon Processing

    • 1st Edition
    • Yale Strausser
    • English
    This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.

  • Light and Heavy Vehicle Technology

    • 2nd Edition
    • M.J. Nunney
    • English
    Light and Heavy Vehicle Technology, Second Edition deals with the theory and practice of vehicle maintenance, procedure, and diagnosis of vehicle trouble, including technological advances such as four-wheel drive, four-wheel steering, and anti-lock brakes. The book reviews the reciprocating piston petrol engine, the diesel engine, the combustion chambers, and the different means of combustion processes. To counter friction, heat and wear, lubrication to the different moving parts is important. To counter excessive heat which can cause breakdown of lubricating oil films and materials such as gaskets, O-rings, the engine is designed with a cooling system that uses air, water, or engine coolants. Petrol engines use the carburation or injection type of fuel delivery; diesel engines use a high pressure system of fuel injection owing to the higher pressures existing in the diesel combustion chamber. The text explains the operation of the other parts of the vehicle including the ignition and starter system, emission controls, layshaft gearboxes, drive lines, and suspension systems. Heavy vehicles need highly efficient air brakes to stop them compared to the hydraulic brake systems used in smaller and lighter vehicles. The book is suitable for mechanical engineers, engine designers, students, and instructors in mechanical and automotive engineering.

  • Electric Motors and Drives

    Fundamentals, Types and Applications
    • 2nd Edition
    • Austin Hughes
    • English
    Written for non-specialist users of electric motors and drives, this book explains how electric drives work and compares the performance of the main systems, with many examples of applications. The author's approach - using a minimum of mathematics - has made this book equally popular as an outline for professionals and an introductory student text. * First edition (1990) has sold over 6000 copies.Drives and Controls on the first edition: 'This book is very readable, up-to-date and should be extremely useful to both users and o.e.m. designers. I unhesitatingly recommend it to any busy engineer who needs to make informed judgements about selecting the right drive system.' New features of the second edition: * New section on the cycloconverter drive. * More on switched relectance motor drives. * More on vector-controlled induction motor drives. * More on power switching devices. * New 'question and answer' sections on common problems and misconceptions. * Updating throughout. Electric Motors and Drives is for non-specialist users of electric motors and drives. It fills the gap between specialist textbooks (which are pitched at a level which is too academic for the average user) and the more prosaic 'handbooks' which are filled with useful detail but provide little opportunity for the development of any real insight or understanding. The book explores most of the widely-used modern types of motor and drive, including conventional and brushless d.c., induction motors (mains and inverter-fed), stepping motors, synchronous motors (mains and converter-fed) and reluctance motors.

  • Radio Frequency Transistors

    Principles and practical applications
    • 1st Edition
    • Helge Granberg
    • Norman Dye
    • English
    Cellular telephones, satellite communications and radar systems are adding to the increasing demand for radio frequency circuit design principles. At the same time, several generations of digitally-oriented graduates are missing the essential RF skills. This book contains a wealth of valuable design information difficult to find elsewhere.

  • Automotive Electronic Systems

    • 1st Edition
    • Trevor Mellard
    • English
    Automotive Electronic Systems deals with the technological principles and practices used in modern electronic automotive systems. The book includes how electronic control units function in the whole electronic system of the car. After a brief introduction to the mechanical parts of the car, the electronic and microprocessor systems are discussed. Although electronic devices are controlled either by analogue or digital systems, the trend is toward the use of digital. The basic principles of operation of a microprocessor are therefore given attention by the author. Cars depend heavily on sensors, thus, the importance of the different sensors, such as temperature sensors, direct air flow sensors, and turbine flowmeters, is comprehensively explained. Another part of the automotive system is the actuators or relays and both the solenoid and motors are discussed. The operations of the electrical system from the generator, electronic ignition system, to electronic fuel control systems are examined. The book explains the choking device in the electronic fuel control system that is needed when starting a car or the throttle butterfly potentiometer that monitors the movement of the plate in the carburetor every time the accelerator pedal is pushed down or released. The other electronic and computer controlled devices in today’s modern cars such as on-board computers and electronic control of body systems are also comprehensively discussed. This book is helpful to car engine enthusiasts, car mechanics, car electricians, operators of car diagnostic equipment, and instructors of automotive electronic systems.

  • Engineering Materials 2

    • 1st Edition
    • William Bolton
    • English
    Engineering Materials 2 covers an introduction to the properties and structures of engineering materials. The book discusses the types of factors determining the choice of a material; the main properties required of engineering materials; the main methods used for tensile testing, impact testing, bend tests, and hardness measurements and the interpretation of measurements; and the interpretation of thermal conductivity and electrical conductivity data. The text also describes the basic structure of materials; the effect of hot and cold work on a metal structure; and the effect of grain size and shape on the mechanical properties of metals. The basic structural features of thermoplastic, thermosetting, and elastomer materials, relating the mechanical and thermal properties to the structures, and the properties of common plastics, relating the properties to their structures, are also described. The book tackles the main categories of polymer forming and their products; the mechanical properties of composites and the properties of the matrix and fiber; and the environmental stability of materials. Engineering students and technicians will find the book invaluable.

  • Electric Motors and Drives

    Fundamentals, types and applications
    • 1st Edition
    • Austin Hughes
    • English
    Electric Motors and Drives: Fundamentals, Types and Applications provides information regarding the inner workings of motor and drive system. The book is comprised of nine chapters that cover several aspects and types of motor and drive systems. Chapter 1 discusses electric motors, and Chapter 2 deals with power electronic converters for motor drives. Chapter 3 covers the conventional d.c. motors, while Chapter 4 tackles inductions motors – rotating field, slip, and torque. The book also talks about the operating characteristics of induction motors, and then deals with the inverter-fed induction motor drives. The stepping motor systems; the synchronous, switched reluctance, and brushless d.c. drives; and the motor/drive selection are also covered. The text will be of great use to individuals who wish to familiarize themselves with motor and drive systems.

Browse by Publisher