Skip to main content
Elsevier

Elsevier Science

  • Contemporary Practice of Chromatography

    • 1st Edition
    • C.F. Poole + 1 more
    • English
    Written for all those who use chromatography as an analytical tool, this book covers all areas of gas, liquid, and thin-layer chromatography; no other book offers the same scope. The authors have had considerable experience in teaching graduate-level courses and the material presented here has been tried and tested, having formed the basis for short courses taught to groups of industrial chemists. Emphasis is on the practice of chromatographic methods, including ``how to'' sections and numerous examples of calculation methods. Extensively illustrated, the book contains numerous tables of all useful constants, materials and formulas frequently used by chromatographers. Valuable features are the chapters on sample preparation for chromatographic analysis, on instrumental methods for sample identification, and the comprehensive literature review.

  • Signal Processing VI

    Theories and Applications
    • 1st Edition
    • J. Vandewalle + 3 more
    • English
    This was the sixth in the sequence of the international conferences promoted and organized by the European Association for Signal Processing. The conference has established itself as one of the world's largest and most important meetings on the subject.The 444 papers (in three volumes) are organized under 7 themes, containing the following topics:1. Theory of Signals and Systems:a) Detection, b) Estimation, c) Filtering, d)Spectral estimation, e) Adaptive systems, f) Modeling, g) Digital transforms, h) Digital filtering.2. Image Processing and Multidimensional Signal Processing:a) Coding, b) Enhancement, c) Restoration, d) Medical image processing.3. Speech Processing:a) Coding, b) Synthesis, c) Recognition and understanding, d) Enhancement.4. Implementations:a) Hardware, b) Software, c) VLSI, d) Novel Architectures, e) Array processing.5. Knowledge Engineering and Signal Processing:a) Expert systems, b) Pattern recognition, c) Signal interpretation, d) Image understanding.6. Neural Networks for Signal Processing:a) Theory, b) Speech, c) Vision, d) Implementations. 7. Applications:a) Radar, b) Sonar, c) Communications, d) Geophysics, e) Digital audio, f) Biomedics, g) Sensing, h) Robotics, i) Astrophysics, j) Mechanics, k) other.The diversity of topics in this 3-volume set, as well as the extraordinary tempo at which Signal Processing has progressed, attest to the permanent vitality of this area of research and development. Workers in signal processing will find in these papers the latest advances and results, as well as indications on future research and analysis in this rapidly developing field.

  • Proceedings of the 11th International Conference on Vacuum Ultraviolet Radiation Physics

    • 1st Edition
    • T. Miyahara + 3 more
    • English
    These volumes contain 365 of the 505 papers presented at the VUV-11 Conference, held at Rikkyo University, Tokyo, from August 27th to September 1st 1995. The papers are divided into three sections: atomic and molecular spectroscopy, solid state spectroscopy and instrumentation and technological applications. New aspects presented were both quantitative and qualitative improvements in fluorescence spectroscopy and magnetic circular dichroism measurements. The fluorescence data are complementary to those of photoemission in a sense but they appear to open up a new method to analyze the optical excitation and relaxation processes. The application of magnetic circular dichroism has proved to be useful not only in analyzing the electronic structures of magnetic materials but also in practical applications to material engineering as found in experiments combined with photoelectron microscopy. Excellent developments in applications are only found in the field of surface photochemistry, where the technique of etching using VUV light has been appreciably refined.Although the majority of distinctive scientific features in the VUV-11 Conference have been brought about by the application of synchrotron radiation, experiments using a different type of light source appear to have progressed steadily. This is evident in the studies of plasma radiation.

  • Chemical Sensor Technology, Volume 4

    • 1st Edition
    • S. Yamauchi
    • English
    This volume is the fourth in a series of annual reviews on progress in the research and technology, both basic and applied, of chemical sensors. New principles, new devices, and the detailed mechanism of various chemical sensors are described. Chemical sensors continue to grow rapidly in importance encompassing a broad spectrum of technologies covering safety, pollution, fuel economy, medical engineering and industrial processes. More than half the papers in this volume are relevant to biosensing, a strategic field for medical and health care equipment, especially in geriatric medicine. Frequent health checks at home will be increasingly necessary as the proportion of the aged in the population steadily grows. In some cases health conditions will have to be monitored constantly to give warnings or provide emergency assistance at the right time. Because biochemical substances play major roles in physiological processes such as metabolism, excitation and contraction of skeletal muscle and neurotransmission, chemical sensing of the related biochemical substances will eventually become indispensable.Each chapter is written by an expert active in the front lines of chemical sensor research. Not only is the technological essence of the subject provided, but also the background and philosophy, an evaluation of achievements to date and problems to be dealt with. Each topic is described in sufficient depth to be useful to researchers worldwide.

  • Diseases of Sugarcane

    Major Diseases
    • 1st Edition
    • C. Ricaud + 3 more
    • English
    An extensive volume of Sugarcane Diseases and their World Distribution (Vol. I) was published by Elsevier under the auspices of the International Society of Sugar Cane Technologists in 1961. The present volume was intended to be a new edition of the book, but so many changes were required that a new book was needed. Only three chapters have been kept with slight amendments. The other chapters have been completely re-written. In fact with changes in importance of major diseases, four diseases previously treated have been left out; on the other hand, three new topics have been included in the new book, two new diseases and a chapter on sugarcane quarantine.The first chapter gives a brief account of the anatomy, morphology and physiology of the sugarcane plant to facilitate terminology and especially for a better appreciation of the effect of disease on the growth of the crop. Diseases are extensively treated as in Volume I, with a very good description of their symptoms and variation under different conditions and severity, all well illustrated by black and white figures and in a set of colour plates at the end of the book which will prove of valuable help for identification. The causal agents of the diseases are described giving synonyms, cultural characteristics, isolation methods and present knowledge on race variation, an aspect on which there has been quite an advance in knowledge since Volume I was published. New techniques of diagnosis are also given. Advances in research on the diseases over the last 25 years are well covered and supported by an extensive bibliography at the end of each chapter.The book has been edited by people having first hand experience in the field and in research on these diseases. Authors have been selected from among the most knowledgeable all over the sugar cane world, especially with due regard to the importance of the different diseases in their countries.The book should prove of immense value to those concerned with practical aspects of plant disease control in the field: pathologists, agronomists and crop specialists, including consultants, to those concerned with quarantine of the crop, for university lectures and students, and research scientists.In a pre-publication review D.J. Heinz and S.A. Ferreira of the Hawaiian Sugar Planters' Association stated: ``Much has changed and new information generated since the original version of this book was published in 1961. This new edition incorporates most of it, providing both the laboratory and field sugarcane pathologist a complete and authoritative guide to the major sugarcane diseases of the world. It is the best single book available on sugarcane diseases.''

  • Handbook of Fatigue Crack Propagation in Metallic Structures

    • 1st Edition
    • A. Carpinteri
    • English
    The purpose of this Handbook is to provide a review of the knowledge and experiences in the field of fatigue fracture mechanics. It is well-known that engineering structures can fail due to cyclic loading. For instance, a cyclically time-varying loading reduces the structure strength and can provoke a fatigue failure consisting of three stages: (a) crack initiation (b) crack propagation and (c) catastrophic failure. Since last century many scientists have tried to understand the reasons for the above-mentioned failures and how to prevent them. This Handbook contains valuable contributions from leading experts within the international scientific community and covers many of the important problems associated with the fatigue phenomena in civil, mechanical and nuclear engineering.

  • Chains, Clusters, Inclusion Compounds, Paramagnetic Labels, and Organic Rings

    • 1st Edition
    • P. Zanello
    • English
    The role of stereochemistry to elucidate reaction patterns and physico-chemical properties in topical subjects ranging from inorganic to organic chemistry are treated in the fifth and final volume of this series. Detailed accounts are given to study: chaining in polyphosphates, electron-transfers in carbonyl clusters, inclusion of organometallic molecules in cyclodextrins, stereochemistry of paramagnetic metal complexes by labeling with nitroxyl radicals, stereocontrol in organic syntheses assisted by inorganic complexes.

  • Restoration and Rehabilitation of the Desert Environment

    • 1st Edition
    • N. Al-Awadhi + 2 more
    • English
    These proceedings contain technical papers presented at the Kuwait-Japan Symposium on Restoration and Rehabilitation of the Desert Environment, which was held in Kuwait on 3-4 March, 1996. Kuwait was selected as the site for this fourth symposium because of its enormous need for restoring and rehabilitating its desert environment, and because of the progress which Kuwait and Japan have been making collectively in these efforts at both pilot and field-scale levels. Kuwait's desert land has recently suffered from one of the worst man-made disasters of all time, having been polluted with vast amounts of oil from the nearly 7000 oil wells that were destroyed during the Gulf War.The three themes for the symposium were: remediation of the polluted soil; enhancement of the visual impact of greenery; and recycling of wastewater for rehabilitation purposes. The first theme was highlighted with presentations on the KISR/PEC Oil-Lake Beds Remediation Project. The second theme was launched with a broad-based discussion on new strategies and alternatives for greening the desert and a summary of the Kuwait National Greenery Plan which is now being prepared. The third theme featured presentations on water resource management in Japan and in KISR's Reverse Osmosis Project to make municipal wastewater recyclable for greenery use in densely populated areas. The closing session culminated in perspectives and recommendations from both Kuwait and Japan and with a historical summary of the long-standing Kuwait/Japan Collaborative Program.

  • Hot Isostatic Pressing '93

    • 1st Edition
    • L. Delaey + 1 more
    • English
    Various topics related to Hot Isostatic Pressing are presented in this volume. As well as papers on more general aspects of HIPing, the papers are organised into four groups: metals and alloys, ceramics, HIP-engineering, and HIP-fundamentals. Castings, powder metallurgy, intermetallics, surface engineering and diffusion bounding are covered in the first group. The papers on ceramics give special attention to HIPing of structural and functional ceramics as well as to ceramic composites. Some interesting HIP-engineering innovations are presented on HIP equipment and HIP-technology. The papers which discuss HIP-fundamentals focus around materials modelling and component modelling.

  • Dust Explosions

    • 1st Edition
    • Volume 4
    • P. Field
    • English
    Handbook of Powder Technology, Volume 4: Dust Explosions presents the dust explosion problem in general terms and describes how and why dusts explode. This book discusses the various approaches used to deal with the dust explosion hazards. Organized into five chapters, this volume begins with an overview of the methods used to assess, remove, or minimize the hazard of dust explosions. This text then examines the factors that influence the initiation and severity of an explosion. Other chapters consider the explosion prevention and explosion protection techniques. This book discusses as well the characteristics of a dust explosion and the historical development of the problem. The final chapter deals with the significant concept of explosion protection to reduce the worst effects of an explosion to an acceptable level. This book is a valuable resource for managers, engineers, scientists, safety personnel, and others involved in the handling ad processing of materials in solid particulate form.

Browse by Publisher