Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
Theoretical and Applied Fracture Mechanics
Theoretical and Applied Fracture Mechanics covers both the theoretical, applied, and numerical aspects associated with cracking related phenomena taking place, at a micro-, meso-, and macroscopic level, in materials/components... of any kind.The Journal aims to cover the cracking/mechanical behaviour of materials/components... in those situations involving both time-independent and time-dependent systems of external forces/moments (such as, for instance, quasi-static, impulsive, impact, blasting, creep, contact, and fatigue loading). Since, under the above circumstances, the mechanical behaviour of cracked materials/components... is also affected by the environmental conditions, the Journal considers also those theoretical/experime... research works investigating the effect of external variables such as, for instance, the effect of corrosive environments as well as of high/low-temperature... The Journal also considers technical articles assessing the cracking behaviour of new materials used in modern and alternative applications, i.e., not only strictly related to engineering. Further, the most advanced technological findings in the surface engineering field are seen to strongly influence the cracking/mechanical behaviour of materials. Accordingly, technical articles investigating, both from a theoretical and an experimental point of view, the existing interactions between the above aspects and the material cracking behaviour are considered for publication.The modelling of the phenomena of interest for the Journal can be based on the conventional linear-elastic/elast... fracture mechanics concepts as well as on novel (or emerging) theories. The Journal is keen to publish new/alternative modelling/design approaches, provided that such innovative theories are soundly based on the state-of-the-art knowledge and, when possible, validated through appropriate experimental results. In more general terms, cracks act as stress/strain concentrators. Accordingly, the Journal is very keen to consider for publication also those studies investigating the effect on the mechanical behaviour of materials/components... of different kinds of stress/strain concentrators such as defects, microstructural in-homogeneities, and, above all, notches of any kind. In more detail, one of the new features of Theoretical and Applied Fracture Mechanics is releasing regular issues addressing, in a systematic way, the notch mechanics problem.The increasing computational power of modern computers is strongly encouraging the scientific community to develop novel methodologies suitable for modelling the mechanical behaviour of materials/components... containing any kind of stress/strain concentrators (i.e., not only cracks and notches, but also defects and microstructural in-homogeneities). Accordingly, Theoretical and Applied Fracture Mechanics aims to publish, through regular issues fully focussed on computational mechanics, also those technical articles addressing the theoretical/computat... aspects leading to an efficient and accurate modelling of the behaviour, at a micro-, meso-, and macroscopic level, of materials and structures containing stress/strain raisers of any kind.Theoretical and Applied Fracture Mechanics is organised according to the following topical issues:1. Miscellany of technical articles fully meeting this aims and scope; 2. Technical articles investigating the notch mechanics field; 3. Technical articles devoted to the computational mechanics aspects; 4. Themed threads, guest-edited by experts, where the themes of interest could not necessarily be addressed in a single issue: this would create a string of issues showing, over years, the progresses made in a specific area of the fracture/notch/compu... mechanics discipline.- ISSN: 0167-8442
Physica B: Condensed Matter
Physica B: Condensed Matter comprises all condensed matter physics, including theoretical, computational, and experimental research. These contributions must be accompanied by a thorough discussion of relevant phenomena in condensed matter and materials physics. The journal is welcoming submissions exploring the following areas: • Ordered phenomena: magnetism, ferroelectricity and multiferroics; charge and orbital orderings; spin waves; superconductivity and superfluidity; nematic phases; other ordered phases in condensed matter • Disordered phenomena: amorphous materials and glasses; spin glasses and random field systems; Anderson localization; other disordered phases in condensed matter • Optics: nonlinear optical and Kerr effects; photoluminescence; other optical effects in condensed matter • Strongly correlated systems: heavy fermions; Mott insulators; Hubbard model systems; perovskites, ruthenates; superconductors; transition metal dichalcogenides; and other systems and materials with strong electron correlations • Materials physics: exploration of materials’ properties, such as electrical conductivity, optical, mechanical, thermal, and magnetic properties beyond simple characterization, underlying the material behavior. Metals, oxides, metal-organics, polymers, ceramics, semiconductors, alloys, high entropy alloys, composites, and related materials • Nanostructures and nanomaterials: theoretical and experimental exploration of nanoscale systems, including nanoparticles; nanotubes; nanowires; quantum dots, wires, wells; thin films, and other related nanomaterials • Quantum materials: quantum Hall effect, spintronics, topological insulators, spin-liquid, spin-orbit coupling materials; other materials ruled by quantum mechanical effects • Surfaces and interfaces: theoretical and experimental analyses of surface structure, surface chemistry, and interfaces in materials; applications • Computational materials: exploration of simulation methods (including molecular dynamics, Monte Carlo, and density functional theory) and modeling techniques (such as first-principles calculations, tight-binding models, and uses of machine learning) to understand materials properties or workflow developments in materials design. Investigation of materials design strategies, like high-throughput screening and other computational tools, tailored for condensed matter researchAlong the submission process, authors are requested to choose one of the following sections for their contribution:• Applied Physics• Computational Materials• Materials Physics• Nanostructures and Quantum Materials• Optics and Photonics• Ordered Phenomena• Strongly Correlated Systems- ISSN: 0921-4526
Newton
Newton, a sibling journal to Cell, aims to be the home of highly influential advances in physics that further our understanding of nature and that help bring a positive impact on society through the application of such knowledge. As a monthly journal, Newton publishes research articles, reviews, perspectives, comments, previews and other editorial content of interest to the global physics community. The journal's mission is to be a platform for the dissemination of outstanding, robust research and compelling ideas that span the broad scope of physics, from fundamental to applied areas, and that foster cross-field collaboration. Examples of topical areas of interest include but are not limited to:Condensed matter physicsElectronics, photonics and device physicsQuantum science and technologyAtomic, molecular and optical physicsSoft matter physicsBiophysicsCom... systems and statistical physicsFluid dynamics and physics of climateNewton is committed to serving the needs of physics researchers by upholding values of transparency, integrity and inclusivity of the diverse aspects of physics around the world, throughout its peer review process and editorial operations.- ISSN: 2950-6360
Forest Ecology and Management
Science to Sustain the World’s ForestsForest Ecology and Management focuses on scientific articles linking forest ecology with forest management, with potential application of biological and ecological knowledge to the management and conservation of plantations and natural forests.The journal encourages communication between scientists in disparate fields who share a common interest in ecology and forest management, bridging the gap between scientists and forest managers. A peer-review process ensures the quality and international interest of the manuscripts accepted for publication. Authors are invited to benefit from editorials that provide advice for constructing strong papers.We encourage submission of papers that will be of strong interest and value to the Journal's international readership. Some key features of papers with strong interest include: 1. Clear connections between the ecology and management of forests; 2. Novel ideas or approaches to important challenges in forest ecology and management; 3. Studies that address a population of interest beyond the scale of single research sites (see the editorial, Three key points in the design of forest experiments, Forest Ecology and Management 255 (2008) 2022-2023); 4. Review Articles on timely, important topics. Authors are invited to contact one of the Editors to discuss the suitability of a potential review manuscript, which can be a regular review, an Mini review or a Tamm review (see the Guide for Authors for details about each type of review article).We invite to read the following editorial article with more advice in relation to preferred articles: How to avoid having your manuscript rejected: Perspectives from the Editors of Forest Ecology and Management, Volume 473, 1 October 2020, 118321.The Journal encourages proposals for special issues examining important areas of forest ecology and management. Potential guest editors should contact one of the Editors to initiate a discussion about topics, potential papers, and other details.- ISSN: 0378-1127
Journal of Molecular Graphics and Modelling
The Journal of Molecular Graphics and Modelling is devoted to the publication of papers on the uses of computers in theoretical investigations of molecular structure, function, interaction, and design. The scope of the journal includes all aspects of molecular modeling and computational chemistry, including, for instance, the study of molecular shape and properties, molecular simulations, protein and polymer engineering, drug design, materials design, structure-activity and structure-property relationships, database mining, and compound library design.As a primary research journal, JMGM seeks to bring new knowledge to the attention of our readers. As such, submissions to the journal need to not only report results, but must draw conclusions and explore implications of the work presented. Authors are strongly encouraged to bear this in mind when preparing manuscripts. Routine applications of standard modelling approaches, providing only very limited new scientific insight, will not meet our criteria for publication. Reproducibility of reported calculations is an important issue. Wherever possible, we urge authors to enhance their papers with Supplementary Data, for example, in QSAR studies machine-readable versions of molecular datasets or in the development of new force-field parameters versions of the topology and force field parameter files. Routine applications of existing methods that do not lead to genuinely new insight will not be considered.JMGM is published in association with two of the largest and most active professional societies in the field: the Molecular Graphics and Modelling Society (MGMS) and the Computers in Chemistry (COMP) Division of the American Chemical Society. Several thousand computational chemists worldwide belong to these two societies and any research topic that may of interest to the membership is within the wide scope of the journal. It is not necessary to be a member of these professional societies to publish in the journal.Published in association with the Molecular Graphics and Modelling Society www.mgms.org and the ACS Division of Computers in Chemistry.- ISSN: 1093-3263
Sustainable Cities and Society
Sustainable Cities and Society (SCS) is an international journal focusing on fundamental and applied research aimed at designing, understanding, and promoting environmentally sustainable and socially resilient cities. We encourage submission of cross-cutting, multi-disciplinary research in the areas of,Smart cities and resilient environments;Alterna... energy sources, energy distribution, distributed energy generation, and energy demand reduction/management... and improving air quality in built environment and cities (e.g., healthy built environment and air quality management);Energy efficient, low/zero carbon, and green buildings/communitie... change mitigation and adaptation in urban environments;Green infrastructure and BMPs;Environmental Footprint accounting and management;Urban agriculture and forestry;ICT, smart grid and intelligent infrastructure;Urban design/planning, regulations, legislation, certification, economics, and policy;Social aspects, impacts and resiliency of cities;Behavior monitoring, analysis and change within urban communities;Health monitoring and improvement;Nexus issues related to sustainable cities and societies;Smart city governance;Decision Support Systems for trade-off and uncertainty analysis for improved management of cities and society;Big data, machine learning, and artificial intelligence applications and case studies;Critical infrastructure protection, including security, privacy, forensics, and reliability issues of cyber-physical systems.Water footprint reduction and urban water distribution, harvesting, treatment, reuse and management;Waste reduction and recycling;Wastewater collection, treatment and recycling;Smart, clean and healthy transportation systems and infrastructure;We support a wide range of methodological and technical approaches including experimental, observational, monitoring and management studies and policy analysis. In addition to fundamental and applied papers, review articles on important developments will be considered.Please follow and tag the journal on one of our Social media accounts if you are sharing a link to your paper on ScienceDirect: Twitter (@SustainableCit8); LinkedIn and WeChat: SCSwechat2022.- ISSN: 2210-6707
Steroids
STEROIDS is an international research journal devoted to studies on all chemical and biological aspects of steroidal moieties. The journal focuses on both experimental and theoretical studies on the biology, chemistry, biosynthesis, metabolism, molecular biology, physiology and pharmacology of steroids and other molecules that target or regulate steroid receptors. Manuscripts presenting clinical research related to steroids, steroid drug development, comparative endocrinology of steroid hormones, investigations on the mechanism of steroid action and steroid chemistry are all appropriate for submission for peer review. STEROIDS publishes both original research and timely reviews. For details concerning the preparation of manuscripts see Instructions to Authors, which is published in each issue of the journal.- ISSN: 0039-128X
Computational Condensed Matter
The journal of Computational Condensed Matter publishes articles based on computational modeling of novel physical properties of materials, ranging from the synthesis, characterization and processing of materials, structures and devices to the numerical methodology of materials simulations. It publishes articles making any contributions on quantum, classical and statistical mechanical studies. The journal also publishes articles on the development or implementation of new methodologies and/or the improvement of existing computational methods or techniques.The journal publishes topics including:Structural and Mechanical properties and defectsDisordered SystemsDynamics, lattice effects and supraconductivityMag... and Magnetic MaterialsElectronic Structure , Excited states, Electronic transportSurfaces, Interfaces, Hybrid materials, and Topological materialsNanoscience... and NanotechnologiesMach... Learning and Big data applied to Condensed MatterThe computed physics properties should be based on the application of modern computational methods, such as: • First principle calculations • Density functional theory • Excited states properties based on the so called GW method or any other many-body perturbation method • Atomic and molecular-scale simulations based on either Monte Carlo or Molecular Dynamics techniques • Semi-empirical simulations based either on tight-binding, or embedded-atom methods • Other modeling techniques using macroscopic input, such as FE-methods or multiscale modeling. • Developing next-generation Machine Learning (ML) force fields for high-accuracy molecular dynamics simulations of complex materials, enabling atomic-scale insights into phase transitions and non-equilibrium behavior.• Creating ML-parameterized Density Functional Theory (DFT) frameworks to accurately model strongly correlated materials, overcoming current limitations of traditional exchange-correlation functionals.The journal also publishes articles on the development or implementation of new methodologies and/or the improvement of existing computational methods or techniques.Research articles will be assessed based on originality and scientific merit. The journal will not consider articles based solely on results obtained using available computer codes without producing significant new results that contribute to the improvement of computational condensed matter physics. The authors should motivate their study by giving a state of the art in their actual research area and state clearly the objective of their work.- ISSN: 2352-2143
Applied Thermal Engineering
Processes. Technologies. Systems. Production. Storage. UtilizationApplied Thermal Engineering disseminates novel research related to the design, development and demonstration of components, devices, equipment, technologies, systems and, in general, solutions involving thermal processes for the production, storage, utilization, management and conservation of energy, with a focus on engineering application. It is noted that articles concerned with the development and/or characterization of materials are only within scope if they include content relating to the implications of the employment of these materials in engineering applications, e.g., by considering their operation and/or performance within components, devices, equipment, technologies and/or wider thermal systems. Research relating to the use of energy for thermal management in diverse applications, from electrical and electronic components to buildings and wider energy systems, is also considered to be within scope if thermal management and/or other thermal application elements are included.The journal publishes high-quality and high-impact Original Research Articles, Review Articles, Vision Articles, Invited Articles, Rapid Communication Articles and Letters to the Editor on cutting-edge innovations in research, and recent advances or issues of interest to the thermal engineering community. Review Articles are generally by invitation. Prospective authors are asked to submit Review Article proposals to the Editor-in-Chief, Deputy Editor-in-Chief and Managing Editor Dr. Kai Wang using this form. Subject to proposal approval, authors will be invited to submit their full article under the appropriate article type. Further details regarding article types can be found in this Guide for Authors under the heading “Article types”.Applied Thermal Engineering encourages the publication of special issues. Special issue organisers are invited to complete and submit a dedicated proposal form to the Editor-in-Chief and Journal Development Editors (see the Editorial Board page) for review and approval at the Board level. The form can be downloaded here for themed special issues and here for conference special issues.Example topics of interest to Applied Thermal Engineering include:Components, devices and equipment such as heat exchangers, heat pipes, energy storage devices, power plants, heat pumps and cooling or refrigeration plants, combined heat and power plants and other polygeneration systems, advanced or alternative cycles, combustion as a thermal energy process and a way to transfer this energy to or within components or systems (such as, for example, boilers, furnaces, internal combustion engines or gas turbines), heat transfer enhancement or suppression as applied to the above, and other unit operations involving thermal engineering processes.Renewable and clean-energy technologies such as solar-thermal or hybrid technologies or systems, the integration of renewable energy within conventional energy processes and systems, energy storage options, thermal management of fuel cells and batteries, and other alternative applied solutions for improving energy efficiency and reducing emissions through thermal engineering.Componen... through to system design covering energy production, storage and utilization, management and conservation in industrial applications, as well as residential or commercial buildings, including solutions to improve thermal performance via passive design techniques, amongst other.Economic assessments of thermal engineering projects, and of the financial performance and implications of component, equipment, technology and system design, implementation and operation.- ISSN: 1359-4311
Additive Manufacturing
Affiliated with America Makes, the National Additive Manufacturing Innovation InstituteAdditive Manufacturing is the peer-reviewed journal that provides academia and world-leading industry with high quality research papers in additive manufacturing. The journal aims to acknowledge the innovative nature of additive manufacturing and its broad applications to outline the current and future developments in the field.Additive manufacturing technologies are positioned to provide a disruptive transformation in how products are designed and manufactured. In response, there was a need to create a unique, in-depth publication outlet for engineers, materials scientists, and practitioners in academia and virtually any industry to document innovation of these technologiesThe journal covers a wide scope, comprising new technologies, processes, methods, materials, systems, and applications in the field of additive manufacturing. Topics of particular interest include, but are not limited to:Design and Modeling • Multiple material components and devices Heterogeneous Design • Heterogeneous Design • Modeling from concept to manufacture to implementation to disposal - the entire product life cycleAdditive manufacturing processes and process enhancements • Advancements in additive manufacturing processes • Multi-technology (hybrid) systems • Enhanced closed-loop control of additive manufacturing systemsMultiple and novel materials • Characterization and performance - mechanical, electrical, chemical, biological, opticals • New material formulations and composite materials • Processing of materials in additive manufacturing and for use in additive manufacturingSpecial applications with multi-functionality • Medical additive manufacturing and bio-printing • Optimized configurations such as topology optimization • Additive manufacturing for space and in-space additive manufacturing • Improved energy utilization in and using additive manufacturing • Nano-additive manufacturing • Electromechanical and robotic systems • 3D electronics, electromagnetics, and metamaterials • Other novel applications of additive manufacturing- ISSN: 2214-8604
