Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
- ISSN: 2468-8231
Molecular Catalysis
Molecular Catalysis publishes full papers that are original, rigorous, and scholarly contributions examining the molecular and atomic aspects of catalytic activation and reaction mechanisms. The fields covered are:Heterogeneous catalysis including immobilized molecular catalystsHomogeneous catalysis including organocatalysis, organometallic catalysis and biocatalysisPhoto- and electrochemistryTheo... aspects of catalysis analyzed by computational methodsManuscripts submitted to Molecular Catalysis ideally fall into the field of chemical synthesis, i.e. the preparation of chemical compounds used as pharmaceutical building blocks, fine chemicals, commodity chemicals or as bulk chemicals (or as precursors for them).Manuscripts dealing with non-synthetic topics such as degradation reactions (e.g. photocatalysis for the degradation of dyes/pollutants), (bio)sensors or fuel cells will not be considered for publication in Molecular Catalysis.Contributi... that do not fall within the above aims and scope will be rejected at the editorial level. Examples are papers that are limited to:*** Routine preparation and characterization of catalytic materialsRoutine synthetic organic applications of catalysisRoutine computational studies that merely reproduces experimental data**Since the scopes of the Elsevier journals Molecular Catalysis, Applied Catalysis A: General, Applied Catalysis B: Environmental, and Catalysis Communications are complementary, an appropriate submission to each journal could be borderline, in which case the advice of another Editor will be sought, possibly redirecting the submission to either Applied Catalysis A: General, Applied Catalysis B: Environmental, or Catalysis Communications (for letters) with the author(s)'s agreement.Molecular Catalysis publishes regularly full papers; special issues on well-defined topics are published only by invitation. However, proposal from authors are welcome anytime and enquiries regarding the submission of special issues should be directed to the Editors. Any special issue should contain at least 30 articles featuring work from leading experts in the area and/or from leading institutes.Review and Perspective articles are normally published by invitation.Perspecti... are short articles covering current areas of interest for molecular catalysis audience in the form of personal accounts. The length of a published perspective ranges from 1500 to 2000 words (excluding figures, structures, photographs, schemes, tables, etc.) with at least 20 or more references.A new article format called "Ongoing Story" will focus on a still open molecular catalysis research showing the developments in the understanding by a specialist area. The length of a published "Ongoing story" ranges from 500 to 1000 words (excluding figures, structures, photographs, schemes, tables, etc.).Guidelines for catalyst characterization and reporting experimental results:Every manuscript published in Molecular Catalysis has to provide sufficient experimental detail to reproduce the experiments and calculations reported. Also, the identity of the products (especially if a new product is synthesized) has to be established together with the yield and its purity.Catalyst characterization: To establish the identity of new catalysts a precise synthesis and purification procedure is inevitable as well as sufficient spectroscopic (e.g. UV-Vis, NMR etc.), crystallographic and chromatographic identification (ideally placed into the supporting information).In case of enzyme catalysts, a detailed description and documentation (e.g. SDS-gels etc) of the enzyme preparation (such as expression system, induction, fermentation conditions, downstream processing and enzyme purification) has to be provided.Catalyst activity assays have to be described in detail (including reagents, assay conditions and activity calculations).Reacti... conditions: A detailed description of the reaction conditions comprises: solvent composition (if appropriate buffer strength, pH etc.), reaction temperature, pressure, shaking- or stirring etc. Whereas possible, the concentrations of all reagents must be given in molar concentrations. This applies in particular to time courses shown in the manuscript. Authors should refrain from showing %-conversions but rather show molar concentrations of products and starting materials. To evaluate the efficiency of a catalyst, turnover numbers and turnover frequencies (together with the conditions and equations for their calculation) should be included in the manuscript text.Statements on efficiency and/or environmental benignity: In general, authors should refrain from claims of 'efficiency' and/or environmental benignity ('greenness') unless these claims are substantiated by a quantitative comparison with a method of the state-of-the-art. Manuscripts using such terms excessively without quantitative justification will not be considered for publication.Plagiari... All manuscripts submitted to Molecular Catalysis are routinely screened with respect to originality of concept, content, and writing. It is not appropriate for an author to reuse wording from publicly available sources (including the authors' own publications) no matter if cited (or not). Manuscripts with a plagiarism level (similarity index) above 10%, including self-plagiarism will be automatically rejected at Editorial level.
- ISSN: 1093-3263
Journal of Molecular Graphics and Modelling
The Journal of Molecular Graphics and Modelling is devoted to the publication of papers on the uses of computers in theoretical investigations of molecular structure, function, interaction, and design. The scope of the journal includes all aspects of molecular modeling and computational chemistry, including, for instance, the study of molecular shape and properties, molecular simulations, protein and polymer engineering, drug design, materials design, structure-activity and structure-property relationships, database mining, and compound library design.As a primary research journal, JMGM seeks to bring new knowledge to the attention of our readers. As such, submissions to the journal need to not only report results, but must draw conclusions and explore implications of the work presented. Authors are strongly encouraged to bear this in mind when preparing manuscripts. Routine applications of standard modelling approaches, providing only very limited new scientific insight, will not meet our criteria for publication. Reproducibility of reported calculations is an important issue. Wherever possible, we urge authors to enhance their papers with Supplementary Data, for example, in QSAR studies machine-readable versions of molecular datasets or in the development of new force-field parameters versions of the topology and force field parameter files. Routine applications of existing methods that do not lead to genuinely new insight will not be considered.JMGM is published in association with two of the largest and most active professional societies in the field: the Molecular Graphics and Modelling Society (MGMS) and the Computers in Chemistry (COMP) Division of the American Chemical Society. Several thousand computational chemists worldwide belong to these two societies and any research topic that may of interest to the membership is within the wide scope of the journal. It is not necessary to be a member of these professional societies to publish in the journal.Published in association with the Molecular Graphics and Modelling Society www.mgms.org and the ACS Division of Computers in Chemistry.
- ISSN: 1096-4959
Comparative Biochemistry and Physiology - Part B: Biochemistry & Molecular Biology
Comparative Biochemistry & Physiology (CBP) publishes papers in comparative, environmental and evolutionary physiology.Part B: Biochemical and Molecular Biology (CBPB), focuses on biochemical physiology, primarily bioenergetics/energy metabolism, cell biology, cellular stress responses, enzymology, intermediary metabolism, macromolecular structure and function, gene regulation, evolutionary genetics. Most studies focus on biochemical or molecular analyses that have clear ramifications for physiological processes.All four CBP journals support and follow the editorial direction from all the major societies in the field:Australia & New Zealand Society of Comparative Physiology and Biochemistry (ANZSCPB)American Physiological Society (APS)Canadian Society of Zoologists (CSZ)Deutsche Zoologische Gesellschaft (DZG)European Society of Comparative Physiology and Biochemistry (ESCPB)Japanese Society for Comparative Physiology and Biochemistry (JSCPB)South American Society for Comparative Physiology and Biochemistry (SASCPB)Societe de Physiologie (SDP)Society for Experimental Biology (SEB)Society for Integrative & Comparative Biology (SICB)Benefits to authorsCBP journals are focused on promoting the authors and the work published in the journal:All articles are carefully evaluated directly by the Editors-in-Chief who are leading experts in their field.Availability: contact the Editor-in-Chief for any questions you may have.The Journal will provide upon request free PDFs to all authors who may not have access to their articles via their institution or library.Publication is free to authors (no color or page charges).Supporting open access: if your funding body or institution requires your article to be open access, CBP offers that option. Please see details here.Reuse figures from any CBP article via "get rights and content" hyperlink available within each article (below author names and affiliations) on ScienceDirect.Please click here for more information on more general author services.Other CBP journals Part A (CBPA): Molecular & Integrative Physiology Part C (CBPC): Toxicology & Pharmacology Part D (CBPD): Genomics and Proteomics
- ISSN: 2772-9508
Biomaterials Advances
Formerly known as Materials Science and Engineering: C, with a 2022 IF of 7.9.Biomaterials Advances includes topics at the interface of the biomedical sciences and materials engineering. These topics include: Bioinspired and biomimetic materials for medical applicationsMaterial... of biological origin for medical applicationsMaterial... for "active" medical applicationsSelf-ass... and self-healing materials for medical applications"Smart" (i.e., stimulus-response) materials for medical applicationsCeramic, metallic, polymeric, and composite materials for medical applicationsMaterial... for in vivo sensingMaterials for in vivo imagingMaterials for delivery of pharmacologic agents and vaccinesNovel approaches for characterizing and modeling materials for medical applicationsManuscri... on biological topics without a materials science component, or manuscripts on materials science without biological applications, will not be considered for publication in Biomaterials Advances. New submissions are first assessed for language, scope and originality (plagiarism check) and can be desk rejected before review if they need English language improvements, are out of scope or present excessive duplication with published sources.Biomaterials Advances sits within Elsevier's biomaterials science portfolio alongside Biomaterials, Materials Today Bio and Biomaterials and Biosystems. As part of the broader Materials Today family, Biomaterials Advances offers authors rigorous peer review, rapid decisions, and high visibility. We look forward to receiving your submissions!
- ISSN: 0304-4068
Journal of Mathematical Economics
In the Editor's view, the formal mathematical expression of economic ideas is of vital importance to economics. Such expression can determine whether a loose economic intuition has a coherent, logical meaning. Also, a full formal development of economic ideas can itself suggest new economic concepts and intuitions.The primary objective of the Journal is to provide a forum for work in economic theory which expresses economic ideas using formal mathematical reasoning. For work to add to this primary objective, it is not sufficient that the mathematical reasoning be new and correct. The work must have real economic content. The economic ideas must be interesting and important. These ideas may pertain to any field of economics or any school of economic thought.
- ISSN: 1389-0417
Cognitive Systems Research
Cognitive Systems Research is dedicated to the study of human-level cognition. As such, it welcomes papers which advance the understanding, design and applications of cognitive and intelligent systems, both natural and artificial.The journal brings together a broad community studying cognition in its many facets in vivo and in silico, across the developmental spectrum, focusing on individual capacities or on entire architectures. It aims to foster debate and integrate ideas, concepts, constructs, theories, models and techniques from across different disciplines and different perspectives on human-level cognition. The scope of interest includes the study of cognitive capacities and architectures - both brain-inspired and non-brain-inspired - and the application of cognitive systems to real-world problems as far as it offers insights relevant for the understanding of cognition.Cognitive Systems Research therefore welcomes mature and cutting-edge research approaching cognition from a systems-oriented perspective, both theoretical and empirically-informed... in the form of original manuscripts, short communications, opinion articles, systematic reviews, and topical survey articles from the fields of Cognitive Science (including Philosophy of Cognitive Science), Artificial Intelligence/Compute... Science, Cognitive Robotics, Developmental Science, Psychology, and Neuroscience and Neuromorphic Engineering. Empirical studies will be considered if they are supplemented by theoretical analyses and contributions to theory development and/or computational modelling studies. Note that the journal does not publish clinical and medical papers. We also do not publish pure machine learning papers, e.g. studies proposing variants of classifiers or pure algorithmic improvements that bear no connection to cognitive systems research in the sense above.Additionally, Cognitive Systems Research plays a special role in fostering and promoting the 'BICA Challenge' to create a real-life computational equivalent of the human mind by devoting two special issues to BICA AI (Brain-Inspired Cognitive Architectures for Artificial Intelligence) related topics each year.
- ISSN: 0032-5910
Powder Technology
An International Journal on the Science and Technology of Wet and Dry Particulate SystemsPowder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:Formation and synthesis of particles by precipitation and other methods.Modification of particles by agglomeration, coating, comminution and attrition.Characteri... of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).Packing, failure, flow and permeability of assemblies of particles.Particle-p... interactions and suspension rheology.Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.Interactio... between particles and their environment, including delivery of particulate products to the body.Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.Submissions will usually be overseen according to the following breakdown of specialties:L.S. Fan (The Ohio State University, USA) Fluidization, particulates and multiphase flows, particulates reaction engineering, modeling, measurements, and industrial processes and applicationsA. Teleki (Uppsala University, Sweden) Aerosols, nanoparticles, agglomeration, and functional material synthesis and applicationsC.Y. Wu (University of Surrey, UK) Particle characterization, particle mechanics, powder processing and handling, modeling and simulationA.B. Yu (Monash University, Australia) Granular dynamics and particle-fluid flow, particulate/granular systems and bulk solids handling, particle packing and structural analysis, comminution and attrition, material synthesis, process engineering and industrial applicationsJ.S. Curtis (University of California, Davis) Computational fluid dynamics and software development, modeling of particulate flow phenomena, application to granular and multiphase flows, fluid and particle mechanics, fluidization
- ISSN: 0377-0427
Journal of Computational and Applied Mathematics
The Journal of Computational and Applied Mathematics publishes original papers of high scientific value in all areas of computational and applied mathematics. The main interest of the Journal is in papers that describe and analyze new computational techniques for solving scientific or engineering problems. Also the improved analysis, including the effectiveness and applicability, of existing methods and algorithms is of importance. The computational efficiency (e.g. the convergence, stability, accuracy, ...) should be proved and illustrated by nontrivial numerical examples. Papers describing only variants of existing methods, without adding significant new computational properties are not of interest.The audience consists of: applied mathematicians, numerical analysts, computational scientists and engineers.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission.This journal has an Open Archive. All published items, including research articles, have unrestricted access and will remain permanently free to read and download 48 months after publication. All papers in the Archive are subject to Elsevier's user license.If you require any further information or help, please visit our Support Center
- ISSN: 0723-2020
Systematic and Applied Microbiology
Systematic and Applied Microbiology deals with various aspects of microbial diversity and systematics of prokaryotes. It focuses on Bacteria and Archaea; eukaryotic microorganisms will only be considered in rare cases. The journal perceives a broad understanding of microbial diversity and encourages the submission of manuscripts from the following branches of microbiology:Systema... Theoretical and practical issues dealing with classification and taxonomy, i.e. • New descriptions or revisions of prokaryotic taxa, including in particular descriptions of not-yet cultured taxa in the category Candidatus, • innovative methods for the determination of taxonomical and genealogical relationships • evaluation of intra-taxon diversity through multidisciplinary approaches • identification methods.Applied Microbiology: polyphasic studies combining multiple methods yielding in-depth data on the diversity and function of particular clades of Bacteria and Archaea in all aspects of agricultural, food, and industrial microbiology, including water and wastewater treatment. Also these studies must have a focus on prokaryotic systematics.Comparat... biochemistry and genomics: studies concerning biochemical/metaboli... and genomic diversity of cultured as well as yet-uncultured Bacteria and Archaea.Ecology: polyphasic descriptions of the microbial diversity and community composition of natural and man-made ecosystems; studies quantifying the size, dynamics, and function of prokaryotic populations; innovative research on the interaction of Bacteria and Archaea with each other and their biotic and abiotic environments. The description of candidate taxa is highly encouraged but should be based on high quality metagenomic information, as well as the in situ identification of the target bacterial or archaeal populations.
- ISSN: 0730-725X
Magnetic Resonance Imaging
An International Journal of Basic Research and Clinical ApplicationsMagnetic Resonance Imaging (MRI) is the first international multidisciplinary journal encompassing physical, life, and clinical science investigations as they relate to the development and use of magnetic resonance imaging. MRI is dedicated to both basic research, technological innovation and applications, providing a single forum for communication among radiologists, physicists, chemists, biochemists, biologists, engineers, internists, pathologists, physiologists, computer scientists, and mathematicians.