Journals in Solid mechanics
Journals in Solid mechanics
- ISSN: 0263-8223
Composite Structures
The past few decades have seen outstanding advances in the use of composite materials in structural applications. There can be little doubt that, within engineering circles, composites have revolutionised traditional design concepts and made possible an unparalleled range of new and exciting possibilities as viable materials for construction. Composite Structures, an International Journal, disseminates knowledge between users, manufacturers, designers and researchers involved in structures or structural components manufactured using composite materials.The journal publishes papers which contribute to knowledge in the use of composite materials in engineering structures. Papers deal with design, research and development studies, experimental investigations, theoretical analysis and fabrication techniques relevant to the application of composites in load-bearing components for assemblies, ranging from individual components such as plates and shells to complete composite structures.Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center- ISSN: 0079-6425
Progress in Materials Science
Progress in Materials Science publishes authoritative and critical reviews of recent advances in the science of materials and their exploitation in engineering and other applications. Emphasis is placed on the fundamental aspects of the subject, particularly those concerning microstructure and nanostructure and their relationship to properties (mechanical, chemical, electrical, magnetic, optical or biomedical). Authors of reviews in Progress in Materials Science are active leaders in materials science and have a strong scientific track record in the field of the review. Regular manuscripts are generally of greater length than those found in journals specialising in research papers. Snapshot reviews focus on a timely topic and are shorter (less than 8,000 words). The Editors kindly request that non-invited manuscripts are preceded by the submission of a proposal through the website.Particular areas of interest for review papers are, but are not limited to:Energy Materials: Materials for energy harvesting, storage, and conversion (solar cells, batteries, supercapacitors, fuel cells, etc,.), electrode materials, mechanism in electrochemical devices, battery design and optimizationQuantum and electronic materials: thin Film technology, materials for electronic devices, quantum dimensional materials (0D,1D and 2D), materials for sensors and detectors (optical, piezoelectric, biosensors)organic light emitting diodesSoft Matter and Biomaterials: polymers, materials for the human body, biomaterials for tissue models, materials for personalized medicine and healthcare, materials for drug delivery, bioinspired materials and synthesis conceptsAdvanced materials manufacturing: innovative fabrication techniques, process design and optimization, scalable production methods, wearable and flexible printed electronic devices, materials and techniques for additive manufacturingHigh-pe... materials: alloys and composites with optimized strength and toughness, advanced materials for extreme environments (e.g. space, arctic), emerging hybrid and composite Materials, high-entropy materialsAdvanced Characterization Techniques: novel techniques such as in-situ electron microscopy, operando spectroscopy, or advanced neutron scattering that reveal material behaviors under real-world conditionsSustainabl... materials science: materials for a circular economy, substitution of critical elements, engineered materials for environmental remediation, sustainable materials and synthesis conceptsComputationa... Materials Science and AI/ML: computational techniques for materials on all size and time scales, computation of phase diagrams, property and lifetime prediction, AI and ML techniques for high-throughput materials design and for advanced processing- ISSN: 0167-6636
Mechanics of Materials
Forum for original scientific research on the flow, fracture, and general constitutive behavior of advanced technological and natural materialsMechanics of Materials, a journal in the field of solid mechanics and materials, aims to disseminate research work in the broad spectrum of engineering and natural materials. It reports research with a mechanically oriented description of substructures from nano- to macro-scales encompassing spatio-temporal behaviors, material instabilities, damage and fracture mechanisms, and interactions between mechanics and multiphysics phenomena including electricity, magnetism, chemistry and optics. Particular emphasis is placed on the inspection of strain rates, spatio-temporal scales, inception of microstructural features and their evolution, and couplings between mechanics and transport phenomena.The topics covered by the journal include: Thermo-mechanical constitutive response of metals, polymers, soft materials, bio-materials, natural and geo materials, ceramics, metallic glasses, granular materials, composites, shape-memory alloys, nanostructured materials, etc. Mechanics-based investigations on emerging areas such as 3D printing, additive manufacturing, bio-inspired materials, 2D materials, e.g., graphene and thin films, are encouraged. Articles that propose advances in combined experimental/computa... approaches in the above fields are of particular interest.- ISSN: 0093-6413
Mechanics Research Communications
Mechanics Research Communications publishes, as rapidly as possible, peer-reviewed manuscripts of high standards. Submitted manuscripts should have a clear and concise exposition that incorporates all figures, tables and references. It aims to provide:• a fast means of communication • an exchange of ideas among workers in mechanics • an effective method of bringing new results quickly to the public • an informal vehicle for the discussion • of ideas that may still be in the formative stagesThe field of Mechanics will be understood to encompass the behavior of continua, fluids, solids, particles and their mixtures. Submissions must contain a strong, novel contribution to the field of mechanics, and ideally should be focused on current issues in the field involving theoretical, experimental and/or applied research, preferably within the broad expertise encompassed by the Board of Associate Editors. Deviations from these areas should be discussed in advance with the Editor-in-Chief.- ISSN: 0921-5093
Materials Science and Engineering: A
Structural Materials: Properties, Microstructure and ProcessingMaterials Science and Engineering A provides an international medium for the publication of theoretical and experimental studies related to the load-bearing capacity of materials as influenced by their basic properties, processing history, microstructure and operating environment. Appropriate submissions to Materials Science and Engineering A should include scientific and/or engineering factors which affect the microstructure - strength relationships of materials and report the changes to mechanical behavior.Please be advised that the Aims and Scope for the journal has recently been updated. The journal will no longer consider or publish papers on concrete and cement-based systems nor on polymeric and polymer-based materials. In addition, papers with an emphasis on corrosion or wear are discouraged, unless they specifically address novel mechanical behavior or related phenomena.- ISSN: 0020-7683
International Journal of Solids and Structures
The International Journal of Solids and Structures has as its objective the publication and dissemination of original research in Mechanics of Solids and Structures as a field of Applied Science and Engineering. It fosters thus the exchange of ideas among workers in different parts of the world and also among workers who emphasize different aspects of the foundations and applications of the field.Standing as it does at the cross-roads of Materials Science, the physical Sciences, insightful Mathematics, and advanced Engineering, the Mechanics of Solids and Structures is experiencing considerable growth, in part as a result of recent technological advances. The Journal, an international medium of communication, encourages and fosters this growth by encompassing articles in all branches of fields that use mechanics to solve problems, ranging from fundamental physical, mathematical, and numerical aspects to the more applied. We aim always for the new, novel and original, substantive, inventive and enduring. Problems in linear and nonlinear material behavior and failure and on the response and failure of structures form the backbone of the journal covering both traditional and more modern aspects: included are inelastic material and structural behavior, instability and localization in solids and structures, mechanics of soft and biological materials and structures, micro- and nano-mechanics, architected and lattice structures, smart materials and structures, and multi-physics problems. Works in related fields such as heat transfer, wave propagation, modal analysis, optimization, concrete and geological materials, and the development of numerical methods are now supported by dedicated journals, but will be considered provided they are of broad interest and represent significant progress. Articles that make intelligent and insightful use of AI to enhance or supplement, but not replace, the laws of physics will be welcome.Emphasis is placed on contributions, analytical, experimental and numerical, which appear to be of permanent interest to research workers and engineers in the field. Papers that are merely illustrations of established principles and procedures, or either design oriented or geometry-specific, even though possibly containing new numerical or experimental data, will generally not be published. When outstanding advances are made in existing areas, or when new areas have been developed to a definitive stage, special review articles will be considered by the Editors. No length limitations for contributions are set, but only concisely written papers are published. Brief articles are considered on the basis of technical merit. Discussions of previously published papers are welcome.We expect submitted articles to be authored by the researchers themselves. While the use of Generative AI tools like ChatGPT is permitted to enhance the readability and language of the manuscript, it must be clearly declared in a statement at the end of the manuscript upon initial submission. Papers that do not meet this requirement will not be considered and may be returned without review.https://www.s...- ISSN: 0749-6419
International Journal of Plasticity
The purpose of the journal is to report original research on all aspects of plastic deformation, damage and fracture behaviour of isotropic as well as anisotropic solids, including the thermodynamics of plasticity and fracture, continuum theory, and macroscopic as well as microscopic phenomena.The topics of interest include plastic behaviour of single crystals and polycrystalline metals, ceramics, rocks and soils, composites, nanocrystalline and microelectronics materials, shape memory alloys, ferroelectric ceramics, thin films and polymers, as well as plasticity aspects of failure and fracture mechanics. Significant experimental, numerical or theoretical contributions advancing the understanding of plastic behaviour of solids are of special interest, together with studies relating macroscopic to the microscopic behaviour of solids. Papers on modeling of finite nonlinear elastic deformation, with similarities to modeling of plastic deformation, are also welcome.The Journal will contain research papers, review articles, research notes, letters to the editor, and academic advertisements (books, journals, conferences, and symposia). Strain-rate dependent and strain-rate independent constitutive models to predict observed phemonena during quasi-static, dynamic or cyclic thermo-mechanical loading, behaviour of granular or porous solids under high confining pressures and at high temperatures, multiscale modeling of various deformation mechanisms (dislocation, twinning, and phase transformation), and models with capability for predicting the behaviour of composite materials based onknown plastic behaviour of matrix and fibers in such materials, are some examples of the main themes of this journal. Revealing applications of the new models of plasticity, including modelling of the observed phenomena in metal forming processes are also of interest.- ISSN: 1359-6454
Acta Materialia
Published on behalf of Acta Materialia, Inc.Acta Materialia provides a forum for publishing full-length, original papers and commissioned overviews, and feature articles that advance the understanding of the relationship between the processing, the structure and the properties of inorganic materials. Acta Materialia prioritizes papers that significantly move the field forward, advancing the thinking in the field and providing mechanistic processing-structure... connections. Explorations of such connections by experiment, computation, theory, data science, and machine learning are all welcome; studies that connect across theory, computation, and experiment through mechanistic means are especially relevant.Materials structure at all scales is of interest, from electronic, atomic, and molecular arrangements to microstructural elements, including crystal defects, polycrystalline and polyphase structures, and spanning to macrostructures formed by processing that impact properties and performance. The connection of these structural features to all kinds of properties is of interest, including mechanical and functional properties, thermodynamics and kinetics, phase transformations, etc.Short communications and comments to papers published in Acta Materialia may be submitted to Scripta Materialia.Manuscrip... about materials that fall outside the scope of Acta Materialia or Scripta Materialia may be submitted to Materialia, which is part of the Acta Materialia family of journals.- ISSN: 0167-8442
Theoretical and Applied Fracture Mechanics
Theoretical and Applied Fracture Mechanics covers both the theoretical, applied, and numerical aspects associated with cracking related phenomena taking place, at a micro-, meso-, and macroscopic level, in materials/components... of any kind.The Journal aims to cover the cracking/mechanical behaviour of materials/components... in those situations involving both time-independent and time-dependent systems of external forces/moments (such as, for instance, quasi-static, impulsive, impact, blasting, creep, contact, and fatigue loading). Since, under the above circumstances, the mechanical behaviour of cracked materials/components... is also affected by the environmental conditions, the Journal considers also those theoretical/experime... research works investigating the effect of external variables such as, for instance, the effect of corrosive environments as well as of high/low-temperature... The Journal also considers technical articles assessing the cracking behaviour of new materials used in modern and alternative applications, i.e., not only strictly related to engineering. Further, the most advanced technological findings in the surface engineering field are seen to strongly influence the cracking/mechanical behaviour of materials. Accordingly, technical articles investigating, both from a theoretical and an experimental point of view, the existing interactions between the above aspects and the material cracking behaviour are considered for publication.The modelling of the phenomena of interest for the Journal can be based on the conventional linear-elastic/elast... fracture mechanics concepts as well as on novel (or emerging) theories. The Journal is keen to publish new/alternative modelling/design approaches, provided that such innovative theories are soundly based on the state-of-the-art knowledge and, when possible, validated through appropriate experimental results. In more general terms, cracks act as stress/strain concentrators. Accordingly, the Journal is very keen to consider for publication also those studies investigating the effect on the mechanical behaviour of materials/components... of different kinds of stress/strain concentrators such as defects, microstructural in-homogeneities, and, above all, notches of any kind. In more detail, one of the new features of Theoretical and Applied Fracture Mechanics is releasing regular issues addressing, in a systematic way, the notch mechanics problem.The increasing computational power of modern computers is strongly encouraging the scientific community to develop novel methodologies suitable for modelling the mechanical behaviour of materials/components... containing any kind of stress/strain concentrators (i.e., not only cracks and notches, but also defects and microstructural in-homogeneities). Accordingly, Theoretical and Applied Fracture Mechanics aims to publish, through regular issues fully focussed on computational mechanics, also those technical articles addressing the theoretical/computat... aspects leading to an efficient and accurate modelling of the behaviour, at a micro-, meso-, and macroscopic level, of materials and structures containing stress/strain raisers of any kind.Theoretical and Applied Fracture Mechanics is organised according to the following topical issues:1. Miscellany of technical articles fully meeting this aims and scope; 2. Technical articles investigating the notch mechanics field; 3. Technical articles devoted to the computational mechanics aspects; 4. Themed threads, guest-edited by experts, where the themes of interest could not necessarily be addressed in a single issue: this would create a string of issues showing, over years, the progresses made in a specific area of the fracture/notch/compu... mechanics discipline.- ISSN: 0997-7538
European Journal of Mechanics - A/Solids
The European Journal of Mechanics A/Solids aims to publish high-quality articles in innovative areas of Solid Mechanics bridging fundamentals, physics, mathematics, computational sciences and materials engineering serving challenging technological applications relying on the mechanical behaviour of solids.The following topics are covered: Mechanics of materials; thermodynamics; elasticity; plasticity and damage; creep; fatigue; fracture; composites and multiphase materials; micromechanics; buckling phenomena; stability; dynamics, vibrations and waves in solids; solids for soft robotics; soft matter mechanics; metamaterial mechanics; contact mechanics, friction and wear; coupled problems; microstructural design and optimization; parameter identification for mechanics; biomechanics of soft and hard tissues; mechanics of MEMS and microsystems.