Journals in Geotechnical engineering engineering geology
Journals in Geotechnical engineering engineering geology
Providing insights into soil and rock behavior, slope stability, and foundation engineering, this portfolio supports civil engineers, geologists, and infrastructure planners. Featuring practical case studies, laboratory techniques, and innovative solutions, these resources address challenges related to construction, natural hazards, and environmental remediation, promoting safe, sustainable development in diverse geological settings.
Soil & Tillage Research
Soil and Tillage Research is an ISTRO-affiliated journal that examines the physical, chemical and biological changes in the soil caused by tillage and field traffic. Manuscripts on all aspects of soil science, physics, technology, mechanization and applied engineering for a sustainable balance among productivity, environmental quality and profitability are considered. The following are examples of suitable topics within the scope of the journal of Soil and Tillage Research:The agricultural and biosystems engineering associated with tillage (including no-tillage, reduced-tillage and direct drilling), irrigation and drainage, crops and crop rotations, fertilization, rehabilitation of mine spoils and processes used to modify soils.Soil change effects on establishment and yield of crops, growth of plants and roots, structure and erosion of soil, cycling of carbon and nutrients, greenhouse gas emissions, leaching, runoff and other processes that affect environmental quality.Characteriza... or modeling of tillage and field traffic responses, soil, climate, or topographic effects, soil deformation processes, tillage tools, traction devices, energy requirements, economics, surface and subsurface water quality effects, tillage effects on weed, pest and disease control, and their interactions.- ISSN: 0167-1987
Applied Clay Science
An International Journal on Physics, Chemistry, Geology and Technology of Clays and Clay MineralsApplied Clay Science is an international journal attracting high-quality, novel scientific papers on clays and clay minerals, including research papers, reviews, and technical notes. The journal covers typical subjects of Fundamental and Applied Clay Science such as:• Synthesis and purification • Structural, crystallographic and mineralogical properties of clays and clay minerals • Thermal properties of clays and clay minerals • Physico-chemical properties including i) surface and interface properties; ii) thermodynamic properties; iii) mechanical properties • Interaction with water, with polar and apolar molecules • Colloidal properties and rheology • Modelling and simulation, but with an experimental application. Purely theoretical simulation studies are only acceptable when they deal with scientific issues that cannot be solved experimentally • Genesis and deposits of clay minerals • Geology and geochemistry of clays • Modification of clays and clay minerals properties by thermal and physical treatments • Modification by chemical treatments with organic and inorganic molecules (organoclays, pillared clays) • Modification by biological microorganisms • Structural and textural modifications of clay minerals • Synthesis of other materials (such as zeolites, and geopolymers) starting from clay minerals. • Novel materials based on clay minerals such as clay polymer (bio)nanocomposites • Clays and clay minerals in formulations of pesticides and drugs and in animal food production • Environmental applications such as Radioactive Waste Disposal, Water Engineering, Depollution of heavy metals, Filtration • Fillers and coating (paint, rubber, plastics) • Drilling fluids and drilling muds in petroleum industry • Foundry moulding • Applications in soil chemistry and in agriculture • Applications of clay mineral in hydrocarbon and geothermal prospection • Geotechnical applications of clays and clay minerals • Applications in ceramics, construction, iron ore and steel industry, paper, catalysis, cosmetics • Related lamellar materials such as Layered Double Hydroxides (LDH), layered oxides, layered silicates, Cement Silicate Hydrates (CSH, CASH, NASH), serpentine, and mica.In all the applications mentioned above, the focus of the manuscript should be on the clay.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 3 (Good health and well - being), SDG 6 (Clear water and sanitation), SDG 7 (Affordable and clean energy), SDG 9 (Industry, infrastructure and innovation), SDG 13, (Climate Action) and SDG 15 (Life on land)- ISSN: 0169-1317
Tunnelling and Underground Space Technology
Tunnelling and Underground Space Technology incorporating Trenchless Technology Research is an international journal which publishes authoritative articles encompassing original research and case studies on the development of tunnelling technology, the use of underground space, underground construction, and trenchless technology.The journal is committed to publishing papers on the interdisciplinary aspects of planning, creating, and regulating underground space, and covers a wide scope including:• Geo-investigation, geomechanics analysis, design and modelling, construction and monitoring, and maintenance and rehabilitation of tunnels and large underground and earth-sheltered structures.• Planning, development, and operation of underground space and underground space environment such as architecture, safety and comfort, and human-space interaction.• Installation and rehabilitation of underground pipelines, ducts, and cables using pipe jacking, microtunnelling, and other forms of trenchless technologies.- ISSN: 0886-7798
Cold Regions Science and Technology
Cold Regions Science and Technology is an international journal dealing with the science and technical problems of cold environments in both the polar regions and more temperate locations. It includes fundamental aspects of cryospheric sciences which have applications for cold regions problems as well as engineering topics which relate to the cryosphere.Emphasis is given to applied science with broad coverage of the physical and mechanical aspects of ice (including glaciers and sea ice), snow and snow avalanches, ice-water systems, ice-bonded soils and permafrost.Relevant aspects of Earth science, materials science, offshore and river ice engineering are also of primary interest. These include icing of ships and structures as well as trafficability in cold environments. Technological advances for cold regions in research, development, and engineering practice are relevant to the journal. Theoretical papers must include a detailed discussion of the potential application of the theory to address cold regions problems. The journal serves a wide range of specialists, providing a medium for interdisciplinary communication and a convenient source of reference.Please see below the areas of research that the Editor in Chief and Associate Editors lead on, with support from members of the Editorial Board.Sea ice and arctic marine technology - Prof. Jukka TuhkuriSnow and snow avalanche - Dr. Nicolas Eckert & Dr. Betty SovillaFrozen soil, frozen rocks and permafrost - Prof. Jilin Qi & Prof. Mingyi ZhangRiver ice - Prof. Mark LoewenAtmospheric icing - Dr. Krzysztof Szilder- ISSN: 0165-232X
CATENA
Catena is an interdisciplinary journal of soil science and geomorphology with a focus on geoecology, landscape ecology, landscape evolution and hydrology. Original research papers, comments, and reviews linking field, laboratory, and/or modelling results, integrating different geospheres, and discussing soil and landscape processes on different spatial and temporal scales will be considered, provided they are sufficiently novel and of broad interest.Reviews are expected to critically discuss and synthesise findings and approaches on topics falling within the core aims of Catena. Short comments (no more than 2 journal pages i.e. ca. 2000 words) are considered for publication only if they bring important scientific new elements and/or corrections/improvem... on substantial aspects of previously published articles. Manuscript... that will not be considered include papers on the following topics:Research papers summarising literature results, and bibliometric analyses (meta-analyses are not included). Studies without explicit relation to landscape patterns or processes, such as:Purely geological or groundwater studies.Runoff studies that have no relation to soil or geomorphic change.Chemical laboratory experiments with no relation to ‘real’ field conditions.Microbiol... studies with no relation to soil formation or landscape processes.Geotechnic... and environmental engineering studies.Geobotanical... ecological and vegetation studies with no (or limited) relation to soil, hydrology, geomorphology or landscape evolution.Agricultur... production experiments without a solid relation to landscape.Studies on ecosystem services and land use planning.Comparisons of the performance and robustness of models and statistical methods (e.g. process-based, or machine learning) with no or only a minimal landscape-learning effect.Regionally oriented studies which cannot be applied to other landscapes (or lack novelty in approach or methodology).The Chairs of the Editors-in-Chief do not accept pre-submission enquiries to determine if a manuscript is likely to be of interest to the journal.- ISSN: 0341-8162
Geotextiles and Geomembranes
An official Journal of the International Geosynthetics SocietyGeotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect or drain. As the use of geotextile fabrics has expanded there has been the introduction of geotextile composites and the development of products such as geogrids and meshes. Overall these materials are referred to as geotextiles and related products. All have a wide range of applications and are currently used to advantage in many civil engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection and coastal engineering.Geomembr... are impermeable membranes used widely as cut-offs and liners. Until recent years, geomembranes were used mostly as canal and pond liners; however, one of the largest current applications is to the containment of hazardous or municipal wastes and their leachates. In many of these applications geomembranes are employed with geotextile or mesh underliners which reinforce or protect the more flexible geomembrane whilst also acting as an escape route for gases and leachates generated in certain wastes.The range of products and their applications has expanded rapidly over the last decade with geotextiles and geomembranes being specified world wide. This rapid growth is paralleled by a virtual explosion of technology. Current reference books and even manufacturers' sponsored publications tend to date very quickly and the need for a vehicle to bring together and discuss the growing body of technology now available has become evident.Geotextiles and Geomembranes fills this need and provides a forum for the dissemination of information amongst research workers, designers, users and manufacturers. By providing a growing fund of information the journal increases general awareness, prompts further research and assists in the establishment of international codes and regulations.Types of Contribution: Refereed technical papers covering research, design, construction, applications and case studies; technical notes, professional practice papers, book reviews, reports of conferences and meetings, and letters to the Editor. All technical papers are open to written discussion. No limit to length is set and short notes are acceptable. Review articles may also be published at intervals, but the subject and contents of these should be discussed first with the Editor.- ISSN: 0266-1144
Coastal Engineering
An International Journal for Coastal, Harbour and Offshore EngineersCoastal Engineering is an international medium for coastal engineers and scientists. Combining practical applications with modern technological and scientific approaches, such as mathematical and numerical modelling, laboratory and field observations and experiments, it publishes fundamental studies as well as case studies on the following aspects of coastal, harbour and offshore engineering: waves, currents and sediment transport; coastal, estuarine and offshore morphology; technical and functional design of coastal and harbour structures; morphological and environmental impact of coastal, harbour and offshore structures.- ISSN: 0378-3839
Marine Structures
Marine Structures provides a medium for presentation and discussion of the latest developments in research, design, fabrication, transport/installati... and in-service experiences relating to the field of Marine Structures .Marine Structures aims to advance knowledge specifically for Marine Structures that are constructed of steel, concrete, or new materials . It publishes topics on the classical areas of ships, fixed, mobile and floating offshore platforms, infrastructures, moorings, pipelines, cables, risers and subsea systems . Submissions on new and emerging research topics, including offshore renewable energies, aquaculture systems, underwater vehicles for offshore operations and related machine learning applications, are particularly welcome.The journal publishes topics including:Ocean environmental design conditions and associated,Loads exerted by waves, currents, wind, tides, ice and ground motions,Seabed foundations, anchoring systems and interaction with marine structural systems,Evaluation of static and dynamic structural responses including collapse behaviour,Fatigue and fracture,Materials selection, corrosion and other forms of degradation applied to marine structures,Formulati... and application of design methods and criteria including system reliability analysis, and optimization techniques,Inspectio... structural health monitoring, maintenance and lifetime extension,Fabricatio... transport, installation and decommissioning techniques,Resilient design of marine systems,Application of machine learning methods and data-driven models for strength and/or load/response predictions of marine structures,Marine Structures does not accept submissions on the following topics:Underwater acoustics,Underwater explosions,Military applications.- ISSN: 0951-8339
Engineering Geology
Engineering Geology is an international interdisciplinary journal bridging the fields of the earth sciences and engineering, particularly geological and geotechnical engineering. The focus of the journal is on geological or engineering studies that are of interest to engineering geologists, whether their initial training is in geology or civil/mining engineering. The studies published in this journal must show relevance to engineering, environmental concerns, and safety.Sample topics of interest include but are not limited to applied geomorphology and structural geology, applied geophysics and geochemistry, environmental geology and hydrogeology, land use planning, natural hazards, remote sensing techniques, soil and rock mechanics and applied geotechnical engineering.Paper types considered are original research articles, case histories, and comprehensive reviews. Case studies, in particular, should emphasize why the paper is of interest to the international readership of this journal, and/or what new or novel research or theoretical methods are being presented.The journal is intended for academic scientists, industry and applied researchers, and policy and decision makers.- ISSN: 0013-7952
Geomechanics for Energy and the Environment
The aim of the Journal is to publish research results of the highest quality and of lasting importance on the subject of geomechanics, with the focus on applications to geological energy production and storage, and the interaction of soils and rocks with the natural and engineered environment. Special attention is given to concepts and developments of new energy geotechnologies that comprise intrinsic mechanisms protecting the environment against a potential engineering induced damage, hence warranting sustainable usage of energy resources.The scope of the journal is broad, including fundamental concepts in geomechanics and mechanics of porous media, the experiments and analysis of novel phenomena and applications. Of special interest are issues resulting from coupling of particular physics, chemistry and biology of external forcings, as well as of pore fluid/gas and minerals to the solid mechanics of the medium skeleton and pore fluid mechanics. The multi-scale and inter-scale interactions between the phenomena and the behavior representations are also of particular interest. Contributions to general theoretical approach to these issues, but of potential reference to geomechanics in its context of energy and the environment are also most welcome.The purpose of the Journal is to foster scientific understanding of various processes in geomaterials, both induced by technology and natural, and their relationship to the underlying mechanisms. The intrinsic nature of coupling of chemical, biological, thermal and mechanical properties, variables and fields distinguishes the related problems from those in classical geomechanics. Thus, emphasis is placed on the development and fusion of fundamental concepts in mechanics, physics, geochemistry and geo-biology and applications of such concepts to novel technologies related to geological energy production and storage as well as to the prevention of the damage to the environment, in which solid and fluid mechanics of geomaterials is of relevance.Writers and Readers Geo-scientists, civil -, petroleum-, geotechnical - geological - mining- and rock- engineers, hydrologists, soil physicists, geophysicists.- ISSN: 2352-3808
International Journal of Rock Mechanics and Mining Sciences
Original Research, New Developments and Case Studies in Rock Mechanics and Rock Engineering for Mining and Civil ApplicationsThis journal is concerned with original research, new developments, site measurements and case studies in rock mechanics and rock engineering. It provides an international forum for the publication of high quality papers on the subject of rock mechanics and the application of rock mechanics principles and techniques to mining and civil engineering projects built on or in rock masses. These projects include slopes, open-pit mines, quarries, shafts, tunnels, caverns, underground mines, metro systems, dams and hydro-electric stations, geothermal energy, petroleum engineering, and radioactive waste disposal. Papers are welcomed on all relevant topics and especially on theoretical developments, analytical methods, numerical methods, rock testing, site investigation, and case studies.- ISSN: 1365-1609
Soil Dynamics and Earthquake Engineering
The journal aims to encourage and enhance the role of mechanics and other disciplines as they relate to earthquake engineering by providing opportunities for the publication of the work of applied mathematicians, engineers and other applied scientists involved in solving problems closely related to the field of earthquake engineering and geotechnical earthquake engineering.Emphasis is placed on new concepts and techniques and case histories are considered only if they enhance the presentation and understanding on new technical concepts associated with analysis.Fields Covered:Seismology and Geology relevant to earthquake engineering problems with emphasis on modeling and methodologies and consideration of their effects on the analysis and design of structures.Wave propagation, wave scattering and dynamic crack propagation in soils and rocks under elastic or inelastic material behavior.Dynamic constitutive behavior of materials.Dynamic interaction problems (soil-structure interaction, fluid-structure interaction and tsunamis if only related to its geotechnical and structural systems).Seismic analysis and design of steel and reinforced concrete structures, retaining walls, dams, slopes.Effect of moving loads on bridges and pavements and vibration isolation in geotechnical structures.Inverse problems, identification and structural health monitoring in earthquake engineering.Instrume... and experimental methods in earthquake engineering.Applied mathematical methods and artificial intelligence for earthquake engineering analysis and design.Performance-b... seismic design of structures.Probabili... methods in earthquake engineering including risk analysis and reliability Earthquake case histories and lessons learned from catastrophic ground motions.Earthquake case histories and lessons learned from catastrophic ground motions only if they include modeling and geotechnical/structu... analysis.- ISSN: 0267-7261
