Skip to main content

Journals in Analytical chemistry

    • Sensors and Actuators B: Chemical

      • ISSN: 0925-4005
      Sensors & Actuators, B: Chemical is an international journal devoted to research and development of chemical transducers. It is an interdisciplinary journal dedicated to publishing research and development in the field of chemical sensors and biosensors, chemical actuators and analytical microsystems. The journal aims to promote original works that demonstrate significant progress beyond the current state of the art in these fields along with applicability to solve meaningful analytical problems. Review articles may only be submitted upon invitation from an Editor of the journal.The journal aims to publish works that are supported by experimental results and as such purely theoretical works are not accepted. The analytical performance in all analytical parameters needs to be reported and critically compared with the state of the art. Sensing applications will be considered only if they refer to analytically challenging complex samples and are properly validated.The scope of the journal encompasses, but is not restricted to, the following areas:Novel chemical sensing and biosensing concepts, mechanisms and detection principlesDevelopmen... of chemical sensors and biosensorsFabricatio... technology of chemical sensors, biosensors, chip-based detection devices and chemical actuatorsChemical actuators including soft actuators, micro- and nanomotors, microfluidic componentsPhotonic and biophotonic sensors and chemical sensing systemsLab-on-a-chip... Micro Total Analysis Systems (µTAS) and other biochips and microarray systemsSensor and sensor-array chemometricsReports on new materials, chemical components and fabrication technologies claimed to be relevant to chemical sensing and actuation will be considered for publication only if an immediate application in that respect is presented or it presents in a novel concept or mechanism.
    • Forensic Science International

      • ISSN: 0379-0738
      An international journal dedicated to the applications of medicine and science in the administration of justice.Forensic Science International is the flagship journal in the prestigious Forensic Science International family, publishing the most innovative, cutting-edge, and influential contributions across the forensic sciences. Fields include: forensic pathology and histochemistry, chemistry, biochemistry and toxicology, biology, serology, odontology, psychiatry, anthropology, digital forensics, the physical sciences, firearms, and document examination, as well as investigations of value to public health in its broadest sense, and the important marginal area where science and medicine interact with the law.The journal publishes:Case ReportsCommentariesL... to the EditorOriginal Research Papers (Regular Papers)Rapid CommunicationsReview ArticlesTechnical NotesForensic Science International adheres to strict ethical publication guidelines and actively supports a culture of inclusive and representative publication. For any submission enquiries, please contact the respective Editor.The Forensic Science International journals offer comprehensive and pioneering coverage within the forensic sciences and beyond, disseminating ground-breaking discoveries, highly specialised research, and foundational science across the family of publications. The FSI portfolio comprises of:Forensic Science InternationalForensi... Science International: Animals and EnvironmentsForensic Science International: Digital InvestigationForensi... Science International: GeneticsForensic Science International: Genetics Supplement SeriesForensic Science International: Mind and LawForensic Science International: ReportsForensic Science International: Synergy
    • Talanta

      • ISSN: 0039-9140
      Talanta provides a forum for the publication of original research papers, short communications, and critical reviews in all branches of pure and applied analytical chemistry. Papers are evaluated based on established guidelines, including the fundamental nature of the study, scientific novelty, substantial improvement or advantage over existing analytical techniques or methods, and demonstrated analytical applicability. Original research papers on fundamental analytical studies, and on novel sensor and instrumentation developments, are encouraged. Novel or significantly improved analytical chemistry applications in areas such as clinical and biological chemistry (including omics platforms), environmental and industrial monitoring and analysis, geochemistry, materials science, and engineering are welcome. For details on editorial criteria, please refer to the Guide for Authors CRITERIA section.Journal sectionsAtomic spectrometric methodsThis section includes articles reporting on novel analytical research employing atomic spectroscopy (e.g., AAS, ICP-OES, ICP-MS, XRF, LIBS), including but not limited to new techniques, instrumentation and applications.Molecul... spectrometric methods (bioanalytical applications), including optical sensors and new reagents/probesThis section welcomes studies employing molecular spectroscopy for the analysis of bioanalytes. It includes research on the design and application of optical sensors, molecular probes, and novel reagents for selective and sensitive detection in biological and biomedical contexts.Molecular spectrometric methods (non-bioanalytical applications), including optical sensors and new reagents/probesThis section includes articles describing applications of molecular spectroscopy for the analysis of analytes not classified as bioanalytes. It includes research on the design and application of optical sensors, molecular probes, and novel reagents for selective and sensitive detection in non-biological and non-biomedical contexts.Separation methods (bioanalytical applications)This section welcomes articles describing the determination of bioanalytes based on novel and high-performance methods for their separation and preconcentration involving among others the use of new sorbents or procedures design in solid phase extraction or chromatographic separation, new membranes and/or membrane-based procedures for membrane separation (and preconcentration), novel solvents for high performance extraction, and other novel sample pretreatment protocols involving separation processes.Separation methods (non-bioanalytical applications)This section includes articles describing the determination of analytes not classified as bioanalytes involving novel and high-performance methods for their separation and preconcentration based among others on the use of new sorbents or procedures design in solid phase extraction or chromatographic separation, new membranes and/or membrane-based procedures for membrane separation (and preconcentration), novel solvents for high performance extraction, and other novel sample pretreatment protocols involving separation processes.Electroche... methods, including electrochemical sensorsThis section focuses on the development of sensor for chemical and biochemical analysis and novel analysis methods based on electroanalytical techniques such as amperometry, voltammetry, potentiometry, conductometry, and coulometry among others. Methods based on impedance measurements and scanning electrochemical microscopy (SECM) for spatio-temporal monitoring of analytes are also welcome. The newly developed sensors should be amenable to miniaturization.Flow analysis and microfluidics methodsThis section welcomes articles describing novel flow analysis or microfluidics methods or/and instrumentation for the analysis of analytes of environmental, industrial or clinical interest.Methods not included in the above sectionsTalanta is the companion title to the open access journal Talanta Open.The name Talanta derives from the Greek word ταλαντα, used by Homer to mean a pair of scales. Such a balance was used for measuring talents or gold coins. See Talanta, 35(5)(1988) I-V for details. The symbol for the journal is a Greek balance taken from one of the Hope Vases.
    • Analytica Chimica Acta

      • ISSN: 0003-2670
      An International Journal Devoted to All Branches of Analytical ChemistryAnalytica Chimica Acta provides a forum for the rapid publication of original research, and critical, comprehensive reviews dealing with all aspects of fundamental and applied modern analytical chemistry. The journal welcomes the submission of research papers which report studies concerning the development of new and significant analytical methodologies. In determining the suitability of submitted articles for publication, particular scrutiny will be placed on the degree of novelty and impact of the research and the extent to which it adds to the existing body of knowledge in analytical chemistry.Manuscript... detailing fundamental research on all aspects of analytical chemistry theory and methodology (including chemometric techniques), such as innovative instrumental, chemical and biological approaches, detectors and sensors, sample treatment methods and data treatment that truly demonstrate new principles and/or important applications are especially encouraged. Analytica Chimica Acta focuses on fundamental new developments in analytical chemistry in general and discourages specialized application oriented submissions that are of interest to a limited number of readers. Papers describing the direct use of routine analytical methodologies or their straightforward/incr... extension of these methods to new sample matrices will normally be rejected unless new and important developments are described which can be demonstrated to give obvious and quantifiable advantages over existing approaches. In all submissions to the journal, authors must address the question of how their proposed methodology compares with those previously reported for the analytes in question even if they employed different techniques. The journal does not focus on application papers, especially those that are straightforward utilizations of commercial instrumentation or other existing techniques, regardless of how complex and expensive they may be. If submitted, application papers must clearly demonstrate a high level of general importance and interest to the analytical chemistry community at large.It will normally be expected that where new analytical methodologies and developments are described these will be applied to a sample matrix of suitable analytical complexity. In such cases appropriate validation of the method must be provided, together with proper statistical treatment of data. Analytical performance characteristics of new methodologies must be given, including calibration, sensitivity, detection limits, accuracy, precision, and interferences. They must also clearly demonstrate substantial superiority in some important respect over existing alternatives.Reviews are normally written by prior agreement of the reviews editors. Potential authors are encouraged to discuss the subject matter of a proposed review with the review editor, and will be asked to provide a brief outline of the subject matter of the proposed review. Review articles should be sufficiently broad in scope to appeal to a wide cross-section of the journal's readership, but should be specific enough to permit discussion to be made at an appropriate depth. Basic methodology and principles should not be included in reviews, but suitable reference should be made to sources of this information. Above all, reviews should be critical rather than enumerative and should provide the reader with expert opinion regarding the relative merits of the various published approaches to the topic under review. Figures and Tables are encouraged in review articles. Tutorials describing the fundamental principles and practical operational details of a given analytical technique, sample processing approach or chemometric method are also welcome. Perspectives are short articles (max 5,000 words), usually from a single author, that provide a particular viewpoint pertaining to analytical chemistry. At least initially, this will not be an open submission process but, instead, these will be solicited (by invite only) from individuals of high scientific merit and/or influence by the perspective editor. While they should strive for objectivity, their main focus is on the individual viewpoint, and as such may advocate the importance of a particular avenue of scientific investigation, analytical method, or field of application. Perspective manuscripts are typically reviewed by editors or members of the editorial board.Manuscripts are considered for publication in Analytica Chimica Acta only on the basis that the work is original and unpublished. The editors and publisher are fundamentally opposed to any form of duplication and plagiarism and if discovered, not only will the manuscript be immediately rejected, the corresponding author(s) could be banned from future submissions to any Elsevier journal. Depending on the severity of the offense, the incident may also be reported to the responsible authorities at the corresponding author's institution(s).
    • Journal of Analytical and Applied Pyrolysis

      • ISSN: 0165-2370
      The Journal of Analytical and Applied Pyrolysis (JAAP) is devoted to the publication of papers dealing with innovative applications of pyrolysis processes, the characterization of products related to pyrolysis reactions, and investigations of reaction mechanism. To be considered by JAAP, a manuscript should present significant progress in these topics. The novelty must be satisfactorily argued in the cover letter. A manuscript with a cover letter to the editor not addressing the novelty is likely to be rejected without review.More specifically, the Scope of the Journal includes:Fundamental pyrolysis research on chemical substances and materials comprising: - experimental studies of pyrolysis reactions such as chemical mechanism and kinetic investigations; this includes preparative pyrolysis methods for the synthesis of novel compounds and mechanisms of high temperature reactions; - computational and theoretical studies of reaction mechanism, kinetics, and thermodynamics are acceptable, provided they are directly related to experimental data, either new or previously published, but they must be described adequately in the paper; - computational processing of pyrolysis data, such as advanced pattern recognition and principal component analysis and other multivariate analyses.Analytical pyrolysis, i.e. the characterization of a material in inert atmosphere by thermally induced degradation reactions; - exploring chemical composition and structure of materials by revealing thermal and chemical decomposition reactions leading to products fully identified by chemical and spectroscopic methods; - applications of analytical pyrolysis in environmental, biological, medical, forensic, cultural heritage, food, geochemical, polymer, and materials science; - new instrumentation and new analytical methods using pyrolysis reactions or to unravel the chemical composition of pyrolysis products.Applied pyrolysis dealing with the development of pyrolysis processes for producing valuable chemicals and/or energy carriers (gas, liquid, solid or electricity) and/or materials from fossil or renewable feedstock or waste, the recycling of materials, and the disposal of toxic substances. The manuscript must discuss the relationships between pyrolysis conditions and product characteristics. This topic includes:- various feedstock (fossil fuels, biomass, wastes, polymers, etc.) and the co-processing of different feedstock;- various thermal processes (slow and fast pyrolysis, torrefaction, carbonization, high pressure pyrolysis, catalytic pyrolysis, deoxygenation, hydropyrolysis, solvent liquefaction).The combination of a pyrolysis process with other types of treatment (mechanical, biological, or chemical) or materials characterization is within the scope of the journal only if the main focus of the manuscript is the pyrolysis process. Integrated processes combining pyrolysis reactors and products purification are welcome, if different pyrolysis conditions are studied. The computational modeling of pyrolysis reactors or processes should be related to experimental data, either new or previously published, but they must be described adequately in the paper.The pyrolysis conditions should be described thoroughly (residence times of solid and vapors, temperature distributions, etc.). The pyrolysis products must be chemically characterized. Catalysts should be physically and chemically characterized before reaction, and, when feasible analysis of catalysts after reaction is also desirable. While this may not always be possible, at least qualitative assessments should be made.The investigation of pyrolysis of a new feedstock or material with conventional methods, but without new development of the pyrolysis process is not sufficiently novel to be considered by JAAP.Review articles are invited by the Editors but may also be proposed in writing to the Review Editor. The subject of review articles should be broad enough to appeal to a wide range of readers. Discussion should be concise, but adequate. More detailed discussion may be appropriate in some cases. It is expected that reviews should be critical rather than just catalogs of published data. They should include the most important, recent advances in the topic, whereas papers of low scientific significance should be given very limited coverage.Out of the scope of JAAPThe Journal does not consider studies based on:- the activation of carbons and characterization of activated carbons;- thermal analysis, mass yields without characterization of the pyrolysis products by chemical and spectroscopic methods;- characterization and application of pyrolysis products, unless clearly related to/aimed at understanding the influence/details of pyrolysis processes and conditions;- theoretical studies, kinetic modelling etc. which are not complemented with or validated by experimental data- combustion, gasification or incineration unless specifically related to the interplay between pyrolysis and oxidation reactions.
    • Biosensors and Bioelectronics

      • ISSN: 0956-5663
      Biosensors & Bioelectronics has an open access companion journal Biosensors &Bioelectronics: X . To submit to Biosensors & Bioelectronics: X visit https://www.editoria... are defined as analytical devices incorporating a biological material, a biologically derived material or a biomimic intimately associated with or integrated within a physicochemical transducer or transducing microsystem, which may be optical, electrochemical, thermometric, piezoelectric, magnetic or micromechanical (Turner et al., 1987; Turner, 1989). Biosensors & Bioelectronics is the principal international journal devoted to research, design, development and application of biosensors and bioelectronics. It is an interdisciplinary journal serving professionals with an interest in the exploitation of biological materials and designs in novel diagnostic and electronic devices including sensors, DNA chips, electronic noses, lab-on-a-chip and μ-TAS. Biosensors usually yield a digital electronic signal which is proportional to the concentration of a specific analyte or group of analytes. While the signal may in principle be continuous, devices can be configured to yield single measurements to meet specific market requirements. Examples of Biosensors include immunosensors, enzyme-based biosensors, organism- and whole cell-based biosensors. They have been applied to a wide variety of analytical problems including uses in medicine, biomedical research, drug discovery, the environment, food, process industries, security and defence. The design and study of molecular and supramolecular structures with molecular biorecognition and biomimetic properties for use in analytical devices is also included within the scope of the journal. Here the focus is on the complementary intersection between molecular recognition, nanotechnology, molecular imprinting and supramolecular chemistry to improve the analytical performance and robustness of devices.The emerging field of Bioelectronics seeks to exploit biology in conjunction with electronics in a wider context encompassing, for example, biological fuel cells, bionics and biomaterials for information processing, information storage, electronic components and actuators. A key aspect is the interface between biological materials and micro- and nano-electronics.Whi... endeavouring to maintain coherence in the scope of the journal, the editors will accept reviews and papers of obvious relevance to the community, which describe important new concepts, underpin understanding of the field or provide important insights into the practical application, manufacture and commercialisation of biosensors and bioelectronics.
    • Bioelectrochemistry

      • ISSN: 1567-5394
      Bioelectrochemistry is an international journal devoted to electrochemical principles in biology and biological aspects of electrochemistry. It publishes experimental and theoretical papers that provide insights on mechanisms and/or novel methods or applications based on electrochemical aspects of:Electrified biological interfaces and biosensing (electric double layers; adsorption; electron transfer; biocatalysis; protein electrochemistry; biosensors incorporating a biological material, a biologically derived material or a biomimic)Molecular and cellular electric field effects, membranes and electroporation (field-dependent processes; field interactions with molecules; intramolecular field effects; sensory systems for electric fields; molecular and cellular mechanisms; membrane thermodynamics and mechanics; membrane transport; electroporation, fusion and insertion)Biofuel cells and bioenergetics (biocatalysis; bioelectrosynthesis; energy conversion; photobioelectrochemi... photosynthetic and visual membranes; microbial biofilms; bacterial biocorrosion)Medicin... and biotechnology (drug delivery and gene transfer to cells and tissues; iontophoresis; skin electroporation; injury and repair; tissue reaction associated with medical implants; in-vivo monitoring)
    • Sensors and Actuators A: Physical

      • ISSN: 0924-4247
      An international journal devoted to research and development of physical transducersSensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas:• Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results.• Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon.• Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays.• Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers.• Thermal sensors, such as: platinum resistors, thermistors, diode temperature sensors, silicon transistor thermometers, integrated temperature transducers, PTAT circuits, thermocouples, thermopiles, pyroelectric thermometers, quartz thermometers, power transistors and thick-film thermal print heads.• Magnetic sensors, such as: magnetoresistors, Corbino disks, magnetodiodes, Hall-effect devices, integrated Hall devices, silicon depletion-layer magnetometers, magneto-injection transistors, magnistors, lateral magnetotransistors, carrier-domain magnetometers, MOS magnetic-field sensors, solid-state read and write heads.• Micromechanics, such as: research papers on actuators, structures, integrated sensors-actuators, microsystems, and other devices or subdevices ranging in size from millimetres to sub-microns; micromechatronics; microelectromechanic... systems; microoptomechanical systems; microchemomechanical systems; microrobots; silicon and non-silicon fabrication techniques; basic studies of physical phenomena of interest to micromechanics; analysis of microsystems; exploration of new topics and materials related to micromechanics; microsystem-related problems like power supplies and signal transmission, microsystem-related simulation tools; other topics of interest to micromechanics.• Interface electronics: electronic circuits which are designed to interface directly with the above transducers and which are used for improving or complementing the characteristics of these devices, such as linearization, A/D conversion, temperature compensation, light-intensity compensation, current/frequency conversion and microcomputer interfacing.• Sensor Systems and Applications, such as: sensor buses, multiple-sensor systems, sensor networks, voting systems, telemetering, sensor arrays, and automotive, environmental, monitoring and control, consumer, medical, alarm and security, robotic, nautical, aeronautical and space measurement systems.
    • Forensic Science International: Genetics

      • ISSN: 1872-4973
      An international journal and the premier journal in the field dedicated to forensic genetics. Official journal of the International Society for Forensic Genetics (ISFG).Forensic Science International: Genetics is the premier journal in the field of Forensic Genetics. This branch of Forensic Science can be defined as the application of genetics to human and non-human material (in the sense of a science with the purpose of studying inherited characteristics for the analysis of inter- and intra-specific variations in populations) for the resolution of legal conflicts.The scope of the journal includes:Forensic applications of human polymorphism.Testing of paternity and other family relationships, immigration cases, typing of biological stains and tissues from criminal casework, identification of human remains by DNA testing methodologies.Descri... of human polymorphisms of forensic interest, with special interest in DNA polymorphisms.Autoso... DNA polymorphisms, mini- and microsatellites (or short tandem repeats, STRs), single nucleotide polymorphisms (SNPs), X and Y chromosome polymorphisms, mtDNA polymorphisms, and any other type of DNA variation with potential forensic applications.Non-hum... DNA polymorphisms for crime scene investigation.Popula... genetics of human polymorphisms of forensic interest.Population data, especially from DNA polymorphisms of interest for the solution of forensic problems.DNA typing methodologies and strategies.Biostatis... methods in forensic genetics.Evaluation of DNA evidence in forensic problems (such as paternity or immigration cases, criminal casework, identification), classical and new statistical approaches.Standards in forensic genetics.Recommendat... of regulatory bodies concerning methods, markers, interpretation or strategies or proposals for procedural or technical standards.Quality control.Quality control and quality assurance strategies, proficiency testing for DNA typing methodologies.Crimin... DNA databases.Technical, legal and statistical issues.General ethical and legal issues related to forensic genetics.Forensic Science International: Genetics adheres to strict ethical publication guidelines and actively supports a culture of inclusive and representative publication. For any submission enquiries, please contact the Editor-in-Chief.The Forensic Science International journals offer comprehensive and pioneering coverage within the forensic sciences and beyond, disseminating ground-breaking discoveries, highly specialised research, and foundational science across the family of publications. The FSI portfolio comprises of:Forensic Science InternationalForensi... Science International: Animals and EnvironmentsForensic Science International: Digital InvestigationForensi... Science International: GeneticsForensic Science International: Genetics Supplement SeriesForensic Science International: Mind and LawForensic Science International: ReportsForensic Science International: Synergy
    • Spectrochimica Acta Part B: Atomic Spectroscopy

      • ISSN: 0584-8547
      Spectrochimica Acta Part B: Atomic Spectroscopy, is intended for the rapid publication of both original work and reviews in the following fields: Atomic Emission (AES), Atomic Absorption (AAS) and Atomic Fluorescence (AFS) spectroscopy;Mass Spectrometry (MS) for inorganic analysis covering Spark Source (SS-MS), Inductively Coupled Plasma (ICP-MS), Glow Discharge (GD-MS), and Secondary Ion Mass Spectrometry (SIMS).Laser induced atomic spectroscopy for inorganic analysis, including non-linear optical laser spectroscopy, covering Laser Enhanced Ionization (LEI), Laser Induced Fluorescence (LIF), Resonance Ionization Spectroscopy (RIS) and Resonance Ionization Mass Spectrometry (RIMS); Laser Induced Breakdown Spectroscopy (LIBS); Cavity Ringdown Spectroscopy (CRDS), Laser Ablation Inductively Coupled Plasma Atomic Emission Spectroscopy (LA-ICP-AES) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS).X-ray spectrometry, X-ray Optics and Microanalysis, including X-ray fluorescence spectrometry (XRF) and related techniques, in particular Total-reflection X-ray Fluorescence Spectrometry (TXRF), and Synchrotron Radiation-excited Total reflection XRF (SR-TXRF).Manuscript... dealing with (i) fundamentals, (ii) methodology development, (iii)instrumentation... and (iv) applications, can be submitted for publication.The emphasis is on papers having a relationship with "spectrochemical analysis". The main subjects will include theoretical or experimental studies of the physical and chemical processes connected with the generation of atomic or mass spectra; the determination of atomic data; diagnostics for spectrochemical sources; the fundamentals, design or performance of complete instrumental systems, components of instruments, or devices used in any of the above stated fields of spectrometry; qualitative and quantitative analysis in the sense of complete analytical procedures using a single method or a combination of methods, or parts of complete procedures: sampling, sample preparation, sample introduction, detection, data acquisition and handling (including calibration and statistical evaluation); analytical performance and analytical figures of merit: limits of detection and limits of determination, selectivity, precision, accuracy, interferences.Author... and comprehensive review articles, dedicated to a particularly important topic or field of analysis, are published regularly. In addition, shorter, concise reviews or viewpoints focusing on the current status and future prospects of a field or topic particularly relevant to the development of a new analytical methodology or to a better understanding of its fundamental underlying principles are welcome. Tutorial reviews, illustrating in depth fundamental concepts in atomic spectroscopy and analytical atomic spectroscopy, are also published.Articles describing an application of a spectroscopic technique to analysis will also be considered. In this case, however, the spectroscopic flavor of the manuscript should be substantial: mere analytical recipes or papers emphasizing separation and pre-concentration techniques should not be submitted. Finally, to the editors' discretion, accelerated publication of short papers dealing with new important concepts, instrumental developments or applications will be considered.