Books in Ceramics

Electroceramics VI '98

1st Edition
May 18, 1999
N. Setter + 2 more
English
Hardback
9 7 8 0 0 8 0 4 3 6 1 9 7

This collection of 185 papers results from contributions made at Electroceramics VI which forms part of the joint triple meeting held in Montreaux, Switzerland in August 1998. The joint meeting covered recent advances in the broad and rapidly progressing field of electroceramics, ferroelectrics and polar dielectrics. More than 550 papers were presented at the triple meeting (250 of them at Electorceramics VI '98) including a series of plenary lectures highlighting research areas of strong current and emerging interests. The meeting demonstrated the wide variety of new applications being developed, based in particular on ferroelectrics, polar dielectrics, ionic conductors and any other functional ceramics. In comparison with previous meetings, the present one showed the growing importance of surfaces, interfaces and other boundaries, e.g. domain walls. Size effects and questions related to nanotechnology were comprehensively discussed both on the academic level and for device realizations. Microdevices and their integration problems (and solutions) were at the heart of many reports. The papers reflected the extensive activities in this interdisciplinary area, while the balance between presentations from academic laboratories and from industrial R&D laboratories was a testimony to its vitality. The volume contains 185 papers selected after refereeing of the 220 papers submitted for publication.

Minimum Reinforcement in Concrete Members

1st Edition
Volume 24
April 22, 1999
A. Carpinteri
English
Hardback
9 7 8 0 0 8 0 4 3 0 2 2 5
eBook
9 7 8 0 0 8 0 5 3 6 5 6 9

The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses.The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete cracking" and "ultimate load after steel yielding" are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems.Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure.

Strengthening of Reinforced Concrete Structures

1st Edition
March 5, 1999
L C Hollaway + 1 more
English
Hardback
9 7 8 1 8 5 5 7 3 3 7 8 7
eBook
9 7 8 1 8 5 5 7 3 7 6 1 7

The in situ rehabilitation or upgrading of reinforced concrete members using bonded steel plates is an effective, convenient and economic method of improving structural performance. However, disadvantages inherent in the use of steel have stimulated research into the possibility of using fibre reinforced polymer (FRP) materials in its place, providing a non-corrosive, more versatile strengthening system.This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforces polymer composite plates. It is based to a large extent on material developed or provided by the consortium which studied the technology of plate bonding to upgrade structural units using carbon fibre / polymer composite materials. The research and trial tests were undertaken as part of the ROBUST project, one of several ventures in the UK Government's DTI-LINK Structural Composites Programme.The book has been designed for practising structural and civil engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduate and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering.

Metal and Ceramic Based Composites

1st Edition
Volume 12
December 12, 1997
S.T. Mileiko
English
eBook
9 7 8 0 0 8 0 5 3 6 3 0 9

Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the necessary technical information has not been well documented.The main purpose of this book is to link together fabrication, structure and properties chains, so as to clarify which structure provides the necessary properties, and how one can attain the correct composite structure. To this end, the book not only contains topics of a purely technical nature, but also a description of the failure mechanics of metal- and ceramic-matrix composites, as this is the key to understanding the structure-properties segment of the chain mentioned.The book is divided into three parts. Part I presents a general view of composites with the accent on metal- and ceramic-matrix composites. It also contains a brief description of modern fibres and composites and can be considered, at least for beginners, as a starting point for further study. Part II looks at the composite microstructures considered to be either optimal or reasonable in resisting a particular loading. Finally Part II describes a variety of mechanical, physical, and chemical potential for organizing these microstructures. Experimental data on technologies, material structures, and material properties are used throughout the book to support theoretical conclusions or to obtain important physical parameters.

Concrete Admixtures Handbook

2nd Edition
December 31, 1996
V.S. Ramachandran
English
eBook
9 7 8 0 8 1 5 5 1 6 5 4 5

Since the publication of the first edition ten years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding ten chapters bring this book up to date; reflecting the relative advances made in the science and technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the first edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures.

Mechanics of Transformation Toughening and Related Topics

1st Edition
Volume 40
May 1, 1996
J.H. Andreasen + 1 more
English
eBook
9 7 8 0 0 8 0 5 3 6 0 4 0

Since the benefit of stress-induced tetragonal to monoclinic phase transformation of confined tetragonal zirconia particles was first recognized in 1975, the phenomenon has been widely studied and exploited in the development of a new class of materials known as transformation toughened ceramics (TTC). In all materials belonging to this class, the microstructure is so controlled that the tetragonal to monoclinic transformation is induced as a result of a high applied stress field rather than as a result of cooling the material below the martensitic start temperature.The significance of microstructure to the enhancement of thermomechanical properties of TTC is now well understood, as are the mechanisms that contribute beneficially to their fracture toughness. The micromechanics of these mechanisms have been extensively studied and are therefore presented here in a cogent manner.The authors also review dislocation formalism for the modelling of cracks and Eshelby's technique. In compiling this monograph the authors present the most up-to-date and complete review of the field and include several topics which have only recently been fully investigated.

Fundamentals of Ceramic Powder Processing and Synthesis

1st Edition
April 30, 1996
Terry A. Ring
English
eBook
9 7 8 0 0 8 0 5 3 2 1 9 6

Ceramic powder synthesis and processing are two of the most important technologies in chemical engineering and the ceramics-related area of materials science. This book covers both the processing and the synthesis ofceramic powders in great depth and is indeed the only up-to-date, comprehensive source on the subject available.The application of modern scientific and engineering methods to the field of ceramic powder synthesis has resulted in much greater control of properties. Fundamentals of Ceramic Powder Processing and Synthesis presents examples of these modern methods as they apply to ceramic powders. The book is organized to describe the natural and synthetic raw materials that comprise contemporary ceramics. It covers the three reactant processes used in synthetic ceramic powder synthesis: solid, liquid, andgas.Ceramic powder processing, as a field of materials processing, is undergoing rapid expansion. The present volume is intended as a complete and useful source on this subject of great current interest. It provides comprehensive coverage from a strong chemistry and chemical engineering perspective and is especially applicable to materials scientists, chemical engineers, and applied chemists.

Handbook of Polymer-Modified Concrete and Mortars

1st Edition
December 31, 1995
Yoshihiko Ohama
English
eBook
9 7 8 0 8 1 5 5 1 7 6 9 6

Mortar and concrete made with portland cement has been a popular construction material in the world for the past 170 years or more. However, cement mortar and concrete have some disadvantages such as delayed hardening, low tensile strength, large drying shrinkage and low chemical resistance. To reduce these disadvantages, polymers have been utilized as an additive.Polymer-mod... or polymer cement mortar (PCM) and concrete (PCC) are the materials which are made by partially replacing the cement hydrate binders of conventional cement mortar or concrete, with polymers. This book deals with the principles of polymer modification for cement composites, the process technology, properties and applications of the polymer-modified mortar and concrete, and special polymer-modified systems such as M DF cement, antiwashout underwater concrete, polymer-ferrocement, and artificial I wood.The polymeric admixtures or cement modifiers include latexes or emulsions, redispersible polymer powders, water-soluble polymers, liquid resins and monomers.This book describes the current knowledge and information of polymer-modified mortars and concretes, and discusses or reviews the following items in detail:1. Principles of polymer modification for cement composites.2. Process technology of polymer-modified mortars and concretes.3. Properties of polymer-modified mortars and concretes.4. Applications of polymer-modified mortars and concretes.5. Special polymer-modified systems such as MDF cements, antiwashout underwater concretes, polymer-ferrocements... and artificial woods.

Handbook of Inorganic Electrochromic Materials

1st Edition
March 16, 1995
C.G. Granqvist
English
eBook
9 7 8 0 0 8 0 5 3 2 9 0 5

Electrochromic materials are able to change their optical properties in a persistent and reversible way under the action of a voltage pulse. This book explores electrochromism among the metal oxides, with detailed discussions of materials preparation (primarily by thin film technology), materials characterization by (electro)chemical and physical techniques, optical properties, electrochromic device design, and device performance. The vast quantity of information presented is structured in a systematic manner and the optical data is interpreted within a novel conceptual framework.The publication will serve as a comprehensive foundation and reference work for future studies within the rapidly expanding field of electrochromic materials and devices. These devices are of particular interest for information displays, variable-transmittan... (smart) windows, variable-reflectance mirrors and variable-emittance surfaces.

Science of Ceramic Interfaces II

1st Edition
Volume 81
January 13, 1995
J. Nowotny
English
eBook
9 7 8 0 0 8 0 5 4 4 9 4 6

This collection of papers arose from the Proceedings of the International Workshop on Interfaces of Ceramic Materials held in Australia, 1993 and is a continuation of the previous book published under the same title. The objective of the Workshop was to discuss research progress on the chemistry of ceramic interfaces and related industrial aspects. Due to the multidisciplinary character of ceramic interfaces the book contains articles covering several areas of expertise, including ceramics, surface science, solid state electrochemistry, metallurgy and high temperature chemistry. Some technical papers are also included in this volume.Scientists and engineers working in these areas, as well as students in materials science and engineering, will find this book of particular significance.

Related subjects

Cement and concrete

Electroceramics

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health