Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

Books Journals

Elements of Space Technology

1st Edition
May 21, 1999
Rudolph X. Meyer
English
eBook
9 7 8 0 0 8 0 5 0 5 4 8 0

This book is written for an introductory course in space technology. It is intended for senior or graduate level aerospace engineering students and professional engineers seeking a thorough understanding of the aerospace aspects of space systems. As such it focuses on the primary physics and engineering fundamentals necessary to understand and design space based systems. The book does not include the basics of spacecraft electronics, because this is covered in many systems and electronics books and is typically covered in follow-up courses.

Non-Destructive Examination of Underwater Welded Structures

1st Edition
May 15, 1999
V S Davey + 3 more
English
eBook
9 7 8 1 8 4 5 6 9 9 5 9 8

Revision of Document IIS/IIW – 1033-89 ‘Information on practices for underwater non-destructive testing’ Prepared by Working Group 2 of Commission V - Quality Control and Quality Assurance of Welded Products

Net Positive Suction Head for Rotodynamic Pumps: A Reference Guide

1st Edition
May 13, 1999
EUROPUMP
English
eBook
9 7 8 0 0 8 0 5 1 2 8 7 7

Cavitation, the result of insufficient pressure in a pump inlet, is not only the major cause of loss in pump performance, but also of reduced cost effectiveness. This practical guide provides straight forward, up to the minute advice on all aspects of cavitation and NPSH, enabling the end user to improve all the factors involved. Prepared by Europump - European Association of Pump Manufacturers - this book contains the results of years of research work and practical experience by leading European educational institutions and pump manufacturers to give a valuable unbiased guide which is applicable to all types of rotodynamic pumps and related systems.

Adaptive Control Systems

1st Edition
May 10, 1999
Gang Feng + 1 more
English
eBook
9 7 8 0 0 8 0 4 9 8 6 0 7

Adaptive control is no longer just an important theoretical field of study, but is also providing solutions to real-world problems. Adaptive techniques will transform the world of control. The leading world practitioners of adaptive control have contributed to this handbook which is the most important work yet in this field. Not only are techniques described in theory, but detailed control algorithms are given, making this a practical cookbook of adaptive control for both control professionals and practising engineers.The book presents the most advanced techniques and algorithms of adaptive control. These include various robust techniques, performance enhancement techniques, techniques with less a-priori knowledge, nonlinear adaptive control techniques and intelligent adaptive techniques. Each technique described has been developed to provide a practical solution to a real-life problem. This volume will therefore not only advance the field of adaptive control as an area of study, but will also show how the potential of this technology can be realised and offer significant benefits.

Single and Multi-Chip Microcontroller Interfacing

1st Edition
April 27, 1999
G. Jack Lipovski
English
eBook
9 7 8 0 0 8 0 5 1 7 2 6 1

Single and Multi-Chip Microcontroller Interfacing teaches the principles of designing and programming microcontrollers that will be used in a wide variety of electronic and mechanical devices, machines and systems. Applications are wide, ranging from controlling an automobile to measuring, controlling and displaying your home's temperature. The book utilizes the new Motorola 68Hc12 microcontroller as the primary example throughout. This new microprocessor is the latest development in mid-level 16-bit microcontrollers that will be used world wide due to its low cost and ease of programming. The book features the most popular programming languages--C and C++--in describing basic and advanced techniques. The 68Hc12 will replace many of the existing 8-bit microprocessors currently used in applications and teaching.

Minimum Reinforcement in Concrete Members

1st Edition
Volume 24
April 22, 1999
A. Carpinteri
English
Hardback
9 7 8 0 0 8 0 4 3 0 2 2 5
eBook
9 7 8 0 0 8 0 5 3 6 5 6 9

The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses.The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete cracking" and "ultimate load after steel yielding" are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems.Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure.

Analog Circuits Cookbook

2nd Edition
April 16, 1999
Ian Hickman
English
eBook
9 7 8 0 0 8 0 4 9 9 0 8 6

Analog Circuits Cookbook is a collection of tried and tested recipes form the masterchef of analog and RF design. Based on articles from Electronics World, this book provides a diet of high quality design techniques and applications, and proven ciruit designs, all concerned with the analog, RF and interface fields of electronics. Ian Hickman uses illustrations and examples rather than tough mathematical theory to present a wealth of ideas and tips based on his own workbench experience. This second edition includes 10 of Hickman's latest articles, alongside 20 of his most popular classics. The new material includes articles on power supplies, filters using negative resistance, phase noise and video surveillance systems.

Engineering Turbulence Modelling and Experiments - 4

1st Edition
April 14, 1999
D. Laurence + 1 more
English
Hardback
9 7 8 0 0 8 0 4 3 3 2 8 8
eBook
9 7 8 0 0 8 0 5 3 0 9 8 7

These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems.Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.

Human Performance and Ergonomics

1st Edition
April 13, 1999
Peter A. Hancock
English
eBook
9 7 8 0 0 8 0 5 3 4 2 1 3

Human Performance and Ergonomics brings together a comprehensive and modern account of how the context of performance is crucial to understanding behavior. Environment provides both constraints and opportunities to individuals, such that external conditions may have reciprocal or interactive effects on behavior.The book begins with an account of research in human factors and engineering, with application of research to real world environments, methodological concerns, and rumination on current and future trends. The book proceeds to how technology has moved from being designed to help human physical survival to helping humans achieve "quality of life" improvements. Real world examples are explored in detail including hearing technology, driving, and aviation. Issues of control, maneuvering, and planning are discussed in conjunction with how intention and expectancy affect behavior. The fit between human and environment is examined as a dynamic interaction, and many chapters address the all important human-machine communication, particularly that between humans and computers.The book closes with a reminder that even our technological environment is filled with other people, with whom we must interact personally or via technology, to achieve our larger goals. Teamwork is thus discussed for its integration of cognitive, behavioral, and affective components toward our achieving desired aims.

Control in Robotics and Automation

1st Edition
April 9, 1999
Bijoy K. Ghosh + 2 more
English
eBook
9 7 8 0 0 8 0 5 0 3 0 7 3

Microcomputer technology and micromechanical design have contributed to recent rapid advances in Robotics. Particular advances have been made in sensor technology that allow robotic systems to gather data and react "intelligently" in flexible manufacturing systems. The analysis and recording of the data are vital to controlling the robot.In order to solve problems in control and planning for a Robotic system it is necessary to meet the growing need for the integration of sensors in to the system. Control in Robotics and Automation addresses this need. This book covers integration planning and control based on prior knowledge and real-time sensory information. A new task-oriented approach to sensing, planning and control introduces an event-based method for system design together with task planning and three dimensional modeling in the execution of remote operations.Typical remote systems are teleoperated and provide work efficiencies that are on the order of ten times slower than what is directly achievable by humans. Consequently, the effective integration of automation into teleoperated remote systems offers potential to improve remote system work efficiency. The authors introduce visually guided control systems and study the role of computer vision in autonomously guiding a robot system.

Related subjects

Aerospace sciences

Automotive engineering

Civil and structural engineering

Electrical and electronic engineering

General engineering

Industrial engineering

Marine engineering

Materials engineering

Mechanical engineering

Mechanics

Media technology

Numerical methods in engineering

Systems and control

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health