Books in Engineering and technology

The Engineering and Technology portfolio includes comprehensive overviews of all major research and practical developments in aerospace and automotive engineering, civil and environmental engineering, mechanical and industrial engineering, materials engineering, electrical engineering, communications engineering, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world case studies provide valuable, actionable insights for researchers, applied engineers and students. The content in Elsevier's Engineering and Technology books program addresses core issues in industry and society, such as sustainability, the circular economy, AI, and automation.

Books Journals

Modern Practice in Servo Design

1st Edition
October 22, 2013
D. R. Wilson
English
eBook
9 7 8 1 4 8 3 1 4 5 4 7 1

International Series of Monographs in Electrical Engineering, Volume 2: Modern Practice in Servo Design focuses on servomechanics and feedback control systems. The selection first takes a look at basic servomechanism theory, including block diagrams, servo components and compensation, power amplification, absolute stability, transfer functions, and frequency response design methods. The book then discusses the design of a large servomechanism and development of the servo design, as well as digital servo techniques, effects of disturbances, performance specification, mechanical resonance, and completed control loop and its stability. The text describes the design of large antennas for radio telescope and satellite trackers. Topics include servo system performance, tracking accuracy requirements, closed loop performance, and dynamic performance. The book also takes a look at the application of analog computers to the design of a servomechanism and the use of hybrid computers in servo design. The selection is a valuable source of information for readers interested in servomechanics and feedback control systems.

Concrete in Highway Engineering

1st Edition
October 22, 2013
D. Raymond Sharp
J. L. Raikes + 1 more
English
eBook
9 7 8 1 4 8 3 1 5 9 3 2 4

International Series of Monographs in Civil Engineering, Volume 4: Concrete in Highway Engineering focuses on the design and construction of highways. The book first offers information on concrete as a material. Cement, aggregates, water, concrete mixes, and curing concrete are then explained. The text examines the design of pavements. Principles of design, traffic loading, design of flexible and concrete pavements, and types of pavement are underscored. The text looks at subgrade soils, sub-bases, and drainage. Topics such as moisture control and drainage; control of surface and subsoil water; and layouts for subsoil drainage and for surface water drainage are discussed. The text also examines the composition of concrete roads, prestressed concrete roads, and maintenance and repair techniques. The book then discusses the appearance and surface characteristics of concrete and construction in extreme weather conditions. The selection is a reliable reference for readers wanting to know about the design and construction of highways.

Practical Woodwork for Laboratory Technicians

1st Edition
October 22, 2013
A. S. Eyers
K. Guy
English
eBook
9 7 8 1 4 8 3 1 5 9 3 8 6

Practical Woodwork for Laboratory Technicians serves as a guide for technicians and workers in maintaining laboratories and workshops and in the production of apparatus for demonstration and research. It contains a number of projects that are useful both in the workshop and the laboratory. The book begins by discussing the importance of timber. It then describes the tools used in woodwork construction such as saws, chisels, marking gauges, hammers, boring tools, cramps, and holding devices, and similar tools. It also illustrates planing of wood, marking and testing boards, drawing geometrical constructions, jointing boxes and frames, gluing surfaces, and finishing woodwork constructions. Woodworkers, laboratory technicians, students, and do-it-yourself enthusiasts will find this text very useful.

Electrical Engineering Principles for Technicians

1st Edition
October 22, 2013
K. M. Smith
N. Hiller
English
eBook
9 7 8 1 4 8 3 1 4 0 2 8 5

Electrical Engineering Principles for Technicians covers the syllabus of Electrical Engineering Principles III of the C.G.L.I. Course for Electrical Technicians. It provides a basic introduction to electrical principles and their practical application. Comprised of eight chapter, the book discusses a wide range of topics including magnetic circuits, rectifier and thermocouple instruments, direct-current machines, transformers, and electric circuits. It also explains the alternating current theory and the generation of a three-phase supply system. The book ends by discussing the rate of change of current in an inductor and a capacitor. Students taking electrical engineering and technician courses will find this book very useful.

Electronics for Technicians

1st Edition
October 22, 2013
P. W. Crane
N. Hiller
English
eBook
9 7 8 1 4 8 3 1 3 7 7 6 6

Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR circuits. The chapters that follow focus on the simple construction and operation of vacuum and semiconductor rectifier devices capable of amplifying alternating signals, uses of transistors and valves in amplifier circuits, and power supplies. Negative and positive feedback is also considered, with particular emphasis on circuit descriptions of the more common oscillator types that produce or do not produce sinusoidal waves. The book concludes with a chapter on laboratory test equipment such as cathode-ray oscilloscopes, alternating current electronic voltmeters, low-frequency signal generators, and Q-meters. This book is written specifically for technicians in the electrical engineering industry.

Radio and Line Transmission

1st Edition
October 22, 2013
Dermot Roddy
N. Hiller
English
eBook
9 7 8 1 4 8 3 1 3 6 3 0 1

Radio and Line Transmission, Volume 2 gives a detailed treatment of the subject as well as an introduction to additional advanced subject matter. Organized into 14 chapters, this book begins by explaining the radio wave propagation, signal frequencies, and bandwidth. Subsequent chapters describe the transmission lines and cables; the aerials; tuned and coupled circuits; bipolar transistor amplifiers; field-effect transistors and circuits; thermionic valve amplifiers; LC oscillators; the diode detectors and modulators; and the superheterodyne receiver. Other chapters explore noise and interference in the transmission; the negative feedback that occurs in amplifier; and the methods used in the field of electronic measurements. This volume will be very valuable to technicians in the electrical engineering industry.

Stress Analysis Problems in S.I. Units

1st Edition
October 22, 2013
D. F. Mallows + 1 more
N. Hiller
English
eBook
9 7 8 1 4 8 3 1 3 7 0 1 8

Stress Analysis Problems in S.I. Units covers topics usually dealt with in HNC and HND strength of materials subjects, in CEI Part I, in the London degree subject properties of materials and stress analysis. Problems are rewritten in S.I. units, with numerical values being rounded to achieve rational metric sizes. This book is organized into 10 chapters covering various aspects involved in stress analysis. These include statics; stress and strain; two-dimensional stress systems; stresses in beams; torsion; and beam deflections. Strain energy methods, elementary plastic stress analysis, and analysis of stress in engineering components are also explained. A list of the base and derived units used in this book is given as well. This book will be very useful to students studying for CNAA degrees.

Furskin Processing

1st Edition
October 22, 2013
Harry Kaplan
A. G. Ward
English
eBook
9 7 8 1 4 8 3 1 3 8 9 5 4

Furskin Processing is concerned with the art and science of furskin processing, from dressing to dyeing and bleaching, finishing, and sheepskin processing. A definition of terms is included. This book consists of eight chapters; the first of which provides a historical background of the dressing and dyeing of furskins and the evolution of fur trade. The reader is then introduced to raw materials used in furskin processing, including animal fibers, keratin, and collagen. The pigmentation, quality, and properties of the pelt or leather side of the furskin are also discussed, along with the effects of singe and shedding on furskin quality and seasonal changes in furskins. The next chapter describes the main sources of the many species of furskin, together with other details important to the dresser and dyer. This book explains as well the methods used in dressing, dyeing, and bleaching of furskin, as well as the final presentation of the dressed or dyed furskin. The final chapter considers the techniques used in the dressing and dyeing of sheepskin. This book is intended primarily for chemists, ""practical"" dressers and dyers, and other members of the fur trade.

Combustion and Heat Transfer in Gas Turbine Systems

1st Edition
October 22, 2013
E. R. Norster
English
eBook
9 7 8 1 4 8 3 1 5 1 7 9 3

Combustion and Heat Transfer in Gas Turbine Systems is a compilation of papers from the Proceedings of an International Propulsion Symposium held at the College of Aeronautics, Cranfield in April 1969. This compilation deals with research done by academic and scientific institutions and of industrial organizations, with some research papers covering atomization, fuels, and high-temperature materials. One paper describes the combustion system of the Concorde engine used in commercial flights, temperature of metal parts, and some design modifications to increase the mechanical life of the combustion system. Another paper discusses the evolution of the RB 162 combustion system that is used in the vertical takeoff and landing aircrafts. The RB 162 has many design features of the earlier single reversal chamber and differs in only one or two points. The book then notes the necessity of a plenum chamber burning to further development of supersonic engines and flight. One paper also proposes an alternative theory to the traditional ignition theory of altitude relighting such as those developed by Lewis and von Elbe. Another paper reposts on some observations made of the atomizing characteristics of air-blast atomizers and proposes simple changes to improve the performance of the atomizer by prefilming and allowing air to both sides of the fuel. This compilation will prove very helpful for aeronautical engineers, aviation designers, physicists, students of engineering, and readers who are interested in the design and development of jet engines and supersonic aircrafts.

Heat Transfer

1st Edition
October 22, 2013
Sam Stuart
English
eBook
9 7 8 1 4 8 3 1 5 4 4 8 0

Heat Transfer: Current Applications of Air Conditioning deals with problems and applications of air conditioning. The discussions are organized around non-stationary heat transfer through walls; study of confined rooms or enclosures; calculation of cooling loads; heat transfer with two-phase refrigerants; measurement of thermal conductivity and water vapour permeability of insulating materials; and tests on air handling equipment (room air-conditioners, induction or fan coil air-conditioners). This book is comprised of 60 chapters and begins with an assessment of the unit-system controversy in the United States and the quest for an ultimate resolution. The following chapters explore the resolution of conductive heat transfer problems using the finite element method; thermal behavior of composite walls under transient conditions; thermal and electrical models for solving problems of non-stationary heat transfer through walls; and use of a radiometer to measure the average temperature of a wall. Experimental results for mixed air convection along a vertical surface are also presented. This monograph will be a valuable resource for electronics engineers.

Related subjects

Aerospace sciences

Automotive engineering

Civil and structural engineering

Electrical and electronic engineering

General engineering

Industrial engineering

Marine engineering

Materials engineering

Mechanical engineering

Mechanics

Media technology

Numerical methods in engineering

Systems and control

Life Sciences

Physical Sciences & Engineering

Social Sciences & Humanities

Health